Read http://msdn.microsoft.com/library/psdk/psdkref/errlist_9usz.htm text version

Win32 Error Codes

The following table provides a list of Win32 error codes. Code 0 1 2 3 4 5 6 7 8 9 10 11 Description The operation completed successfully. Incorrect function. The system cannot find the file specified. The system cannot find the path specified. The system cannot open the file. Access is denied. The handle is invalid. The storage control blocks were destroyed. Not enough storage is available to process this command. The storage control block address is invalid. The environment is incorrect. An attempt was made to load a program with an incorrect format. The access code is invalid. The data is invalid. Not enough storage is available to complete this operation. The system cannot find the drive specified. The directory cannot be removed. The system cannot move the file to a different disk drive. There are no more files. The media is write protected. The system cannot find the device specified. The device is not ready. The device does not recognize the command. Data error (cyclic redundancy check). Name ERROR_SUCCESS ERROR_INVALID_FUNCTION ERROR_FILE_NOT_FOUND ERROR_PATH_NOT_FOUND ERROR_TOO_MANY_OPEN_FILES ERROR_ACCESS_DENIED ERROR_INVALID_HANDLE ERROR_ARENA_TRASHED ERROR_NOT_ENOUGH_MEMORY ERROR_INVALID_BLOCK ERROR_BAD_ENVIRONMENT ERROR_BAD_FORMAT

12 13 14 15 16 17 18 19 20 21 22 23

ERROR_INVALID_ACCESS ERROR_INVALID_DATA ERROR_OUTOFMEMORY ERROR_INVALID_DRIVE ERROR_CURRENT_DIRECTORY ERROR_NOT_SAME_DEVICE ERROR_NO_MORE_FILES ERROR_WRITE_PROTECT ERROR_BAD_UNIT ERROR_NOT_READY ERROR_BAD_COMMAND ERROR_CRC

24

The program issued a command but the command length is incorrect. The drive cannot locate a specific area or track on the disk. The specified disk or diskette cannot be accessed. The drive cannot find the sector requested. The printer is out of paper. The system cannot write to the specified device. The system cannot read from the specified device. A device attached to the system is not functioning. The process cannot access the file because it is being used by another process. The process cannot access the file because another process has locked a portion of the file. The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. Too many files opened for sharing. Reached the end of the file. The disk is full. The request is not supported. The remote computer is not available. A duplicate name exists on the network. The network path was not found. The network is busy. The specified network resource or device is no longer available. The network BIOS command limit has been reached. A network adapter hardware error occurred. The specified server cannot perform the requested operation. An unexpected network error

ERROR_BAD_LENGTH

25

ERROR_SEEK

26 27 28 29 30 31 32

ERROR_NOT_DOS_DISK ERROR_SECTOR_NOT_FOUND ERROR_OUT_OF_PAPER ERROR_WRITE_FAULT ERROR_READ_FAULT ERROR_GEN_FAILURE ERROR_SHARING_VIOLATION

33

ERROR_LOCK_VIOLATION

34

ERROR_WRONG_DISK

36 38 39 50 51 52 53 54 55 56 57 58

ERROR_SHARING_BUFFER_EXCEEDED ERROR_HANDLE_EOF ERROR_HANDLE_DISK_FULL ERROR_NOT_SUPPORTED ERROR_REM_NOT_LIST ERROR_DUP_NAME ERROR_BAD_NETPATH ERROR_NETWORK_BUSY ERROR_DEV_NOT_EXIST ERROR_TOO_MANY_CMDS ERROR_ADAP_HDW_ERR ERROR_BAD_NET_RESP

59

ERROR_UNEXP_NET_ERR

occurred. 60 61 62 The remote adapter is not compatible. The printer queue is full. Space to store the file waiting to be printed is not available on the server. Your file waiting to be printed was deleted. The specified network name is no longer available. Network access is denied. The network resource type is not correct. The network name cannot be found. The name limit for the local computer network adapter card was exceeded. The network BIOS session limit was exceeded. The remote server has been paused or is in the process of being started. No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. The specified printer or disk device has been paused. The file exists. The directory or file cannot be created. Fail on INT 24. Storage to process this request is not available. The local device name is already in use. The specified network password is not correct. The parameter is incorrect. A write fault occurred on the network. The system cannot start another process at this time. Cannot create another system semaphore. ERROR_BAD_REM_ADAP ERROR_PRINTQ_FULL ERROR_NO_SPOOL_SPACE

63 64 65 66 67 68

ERROR_PRINT_CANCELLED ERROR_NETNAME_DELETED ERROR_NETWORK_ACCESS_DENIED ERROR_BAD_DEV_TYPE ERROR_BAD_NET_NAME ERROR_TOO_MANY_NAMES

69 70

ERROR_TOO_MANY_SESS ERROR_SHARING_PAUSED

71

ERROR_REQ_NOT_ACCEP

72 80 82 83 84 85 86 87 88 89 100

ERROR_REDIR_PAUSED ERROR_FILE_EXISTS ERROR_CANNOT_MAKE ERROR_FAIL_I24 ERROR_OUT_OF_STRUCTURES ERROR_ALREADY_ASSIGNED ERROR_INVALID_PASSWORD ERROR_INVALID_PARAMETER ERROR_NET_WRITE_FAULT ERROR_NO_PROC_SLOTS ERROR_TOO_MANY_SEMAPHORES

101 102 103 104 105 106 107

The exclusive semaphore is owned by another process. The semaphore is set and cannot be closed. The semaphore cannot be set again. Cannot request exclusive semaphores at interrupt time. The previous ownership of this semaphore has ended. Insert the diskette for drive % 1. The program stopped because an alternate diskette was not inserted. The disk is in use or locked by another process. The pipe has been ended. The system cannot open the device or file specified. The file name is too long. There is not enough space on the disk. No more internal file identifiers available. The target internal file identifier is incorrect. The IOCTL call made by the application program is not correct. The verify-on -write switch parameter value is not correct. The system does not support the command requested. This function is not supported on this system. The semaphore timeout period has expired. The data area passed to a system call is too small. The filename, directory name, or volume label syntax is incorrect. The system call level is not correct. The disk has no volume label. The specified module could not be found.

ERROR_EXCL_SEM_ALREADY_OWNED ERROR_SEM_IS_SET ERROR_TOO_MANY_SEM_REQUESTS ERROR_INVALID_AT_INTERRUPT_TIME ERROR_SEM_OWNER_DIED ERROR_SEM_USER_LIMIT ERROR_DISK_CHANGE

108 109 110 111 112 113 114 117

ERROR_DRIVE_LOCKED ERROR_BROKEN_PIPE ERROR_OPEN_FAILED ERROR_BUFFER_OVERFLOW ERROR_DISK_FULL ERROR_NO_MORE_SEARCH_HANDLES ERROR_INVALID_TARGET_HANDLE ERROR_INVALID_CATEGORY

118 119 120 121 122 123

ERROR_INVALID_VERIFY_SWITCH ERROR_BAD_DRIVER_LEVEL ERROR_CALL_NOT_IMPLEMENTED ERROR_SEM_TIMEOUT ERROR_INSUFFICIENT_BUFFER ERROR_INVALID_NAME

124 125 126

ERROR_INVALID_LEVEL ERROR_NO_VOLUME_LABEL ERROR_MOD_NOT_FOUND

127 128 129 130

The specified procedure could not be found. There are no child processes to wait for. The %1 application cannot be run in Win32 mode. Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. An attempt was made to move the file pointer before the beginning of the file. The file pointer cannot be set on the specified device or file. A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. The system tried to delete the JOIN of a drive that is not joined. The system tried to delete the substitution of a drive that is not substituted. The system tried to join a drive to a directory on a joined drive. The system tried to substitute a drive to a directory on a substituted drive. The system tried to join a drive to a directory on a substituted drive. The system tried to SUBST a drive to a directory on a joined drive. The system cannot perform a JOIN or SUBST at this time. The system cannot join or substitute a drive to or for a directory on the same drive. The directory is not a subdirectory of the root directory.

ERROR_PROC_NOT_FOUND ERROR_WAIT_NO_CHILDREN ERROR_CHILD_NOT_COMPLETE ERROR_DIRECT_ACCESS_HANDLE

131

ERROR_NEGATIVE_SEEK

132 133

ERROR_SEEK_ON_DEVICE ERROR_IS_JOIN_TARGET

134

ERROR_IS_JOINED

135

ERROR_IS_SUBSTED

136

ERROR_NOT_JOINED

137

ERROR_NOT_SUBSTED

138 139

ERROR_JOIN_TO_JOIN ERROR_SUBST_TO_SUBST

140

ERROR_JOIN_TO_SUBST

141

ERROR_SUBST_TO_JOIN

142 143

ERROR_BUSY_DRIVE ERROR_SAME_DRIVE

144

ERROR_DIR_NOT_ROOT

145 146 147

The directory is not empty. The path specified is being used in a substitute. Not enough resources are available to process this command. The path specified cannot be used at this time. An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. The number of specified semaphore events for DosMuxSemWait is not correct. DosMuxSemWait did not execute; too many semaphores are already set. The DosMuxSemWait list is not correct. The volume label you entered exceeds the label character limit of the target file system. Cannot create another thread. The recipient process has refused the signal. The segment is already discarded and cannot be locked. The segment is already unlocked. The address for the thread ID is not correct. The argument string passed to DosExecPgm is not correct. The specified path is invalid. A signal is already pending. No more threads can be created in the system. Unable to lock a region of a file. The requested resource is in use. A lock request was not outstanding for the supplied cancel region.

ERROR_DIR_NOT_EMPTY ERROR_IS_SUBST_PATH ERROR_IS_JOIN_PATH

148 149

ERROR_PATH_BUSY ERROR_IS_SUBST_TARGET

150

ERROR_SYSTEM_TRACE

151

ERROR_INVALID_EVENT_COUNT

152

ERROR_TOO_MANY_MUXWAITERS

153 154

ERROR_INVALID_LIST_FORMAT ERROR_LABEL_TOO_LONG

155 156 157

ERROR_TOO_MANY_TCBS ERROR_SIGNAL_REFUSED ERROR_DISCARDED

158 159 160 161 162 164 167 170 173

ERROR_NOT_LOCKED ERROR_BAD_THREADID_ADDR ERROR_BAD_ARGUMENTS ERROR_BAD_PATHNAME ERROR_SIGNAL_PENDING ERROR_MAX_THRDS_REACHED ERROR_LOCK_FAILED ERROR_BUSY ERROR_CANCEL_VIOLATION

174

The file system does not support atomic changes to the lock type. The system detected a segment number that was not correct. The operating system cannot run %1. Cannot create a file when that file already exists. The flag passed is not correct. The specified system semaphore name was not found. The operating system cannot run %1. The operating system cannot run %1. The operating system cannot run %1. Cannot run %1 in Win32 mode. The operating system cannot run %1. %1 is not a valid Win32 application. The operating system cannot run %1. The operating system cannot run %1. The operating system cannot run this application program. The operating system is not presently configured to run this application. The operating system cannot run %1. The operating system cannot run this application program. The code segment cannot be greater than or equal to 64K. The operating system cannot run %1. The operating system cannot run %1. The system could not find the environment option that was entered. No process in the command subtree has a signal handler.

ERROR_ATOMIC_LOCKS_NOT_SUPPORTED

180 182 183 186 187

ERROR_INVALID_SEGMENT_NUMBER ERROR_INVALID_ORDINAL ERROR_ALREADY_EXISTS ERROR_INVALID_FLAG_NUMBER ERROR_SEM_NOT_FOUND

188 189 190 191 192 193 194 195 196 197

ERROR_INVALID_STARTING_CODESEG ERROR_INVALID_STACKSEG ERROR_INVALID_MODULETYPE ERROR_INVALID_EXE_SIGNATURE ERROR_EXE_MARKED_INVALID ERROR_BAD_EXE_FORMAT ERROR_ITERATED_DATA_EXCEEDS_64k ERROR_INVALID_MINALLOCSIZE ERROR_DYNLINK_FROM_INVALID_RING ERROR_IOPL_NOT_ENABLED

198 199 200 201 202 203

ERROR_INVALID_SEGDPL ERROR_AUTODATASEG_EXCEEDS_64k ERROR_RING2SEG_MUST_BE_MOVABLE ERROR_RELOC_CHAIN_XEEDS_SEGLIM ERROR_INFLOOP_IN_RELOC_CHAIN ERROR_ENVVAR_NOT_FOUND

205

ERROR_NO_SIGNAL_SENT

206 207 208

The filename or extension is too long. The ring 2 stack is in use. The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. The signal being posted is not correct. The signal handler cannot be set. The segment is locked and cannot be reallocated. Too many dynamic-link modules are attached to this program or dynamic-link module. Cannot nest calls to LoadModule. The image file %1 is valid, but is for a machine type other than the current machine. The pipe state is invalid. All pipe instances are busy. The pipe is being closed. No process is on the other end of the pipe. More data is available. The session was canceled. The specified extended attribute name was invalid. The extended attributes are inconsistent. The wait operation timed out. No more data is available. The copy functions cannot be used. The directory name is invalid. The extended attributes did not fit in the buffer. The extended attribute file on the mounted file system is corrupt. The extended attribute table file is full. The specified extended attribute handle is invalid.

ERROR_FILENAME_EXCED_RANGE ERROR_RING2_STACK_IN_USE ERROR_META_EXPANSION_TOO_LONG

209 210 212 214

ERROR_INVALID_SIGNAL_NUMBER ERROR_THREAD_1_INACTIVE ERROR_LOCKED ERROR_TOO_MANY_MODULES

215 216

ERROR_NESTING_NOT_ALLOWED ERROR_EXE_MACHINE_TYPE_MISMATCH

230 231 232 233 234 240 254 255 258 259 266 267 275 276

ERROR_BAD_PIPE ERROR_PIPE_BUSY ERROR_NO_DATA ERROR_PIPE_NOT_CONNECTED ERROR_MORE_DATA ERROR_VC_DISCONNECTED ERROR_INVALID_EA_NAME ERROR_EA_LIST_INCONSISTENT WAIT_TIMEOUT ERROR_NO_MORE_ITEMS ERROR_CANNOT_COPY ERROR_DIRECTORY ERROR_EAS_DIDNT_FIT ERROR_EA_FILE_CORRUPT

277 278

ERROR_EA_TABLE_FULL ERROR_INVALID_EA_HANDLE

282

The mounted file system does not support extended attributes. Attempt to release mutex not owned by caller. Too many posts were made to a semaphore. Only part of a ReadProcessMemory or WriteProcessMemory request was completed. The oplock request is denied. An invalid oplock acknowledgment was received by the system. The volume is too fragmented to complete this operation. The system cannot find message text for message number 0x%1 in the message file for %2. Attempt to access invalid address. Arithmetic result exceeded 32 bits. There is a process on other end of the pipe. Waiting for a process to open the other end of the pipe. Access to the extended attribute was denied. The I/O operation has been aborted because of either a thread exit or an application request. Overlapped I/O event is not in a signaled state. Overlapped I/O operation is in progress. Invalid access to memory location. Error performing inpage operation. Recursion too deep; the stack overflowed. The window cannot act on the sent message. Cannot complete this function. Invalid flags.

ERROR_EAS_NOT_SUPPORTED

288 298 299

ERROR_NOT_OWNER ERROR_TOO_MANY_POSTS ERROR_PARTIAL_COPY

300 301

ERROR_OPLOCK_NOT_GRANTED ERROR_INVALID_OPLOCK_PROTOCOL

302 317

ERROR_DISK_TOO_FRAGMENTED ERROR_MR_MID_NOT_FOUND

487 534 535 536 994 995

ERROR_INVALID_ADDRESS ERROR_ARITHMETIC_OVERFLOW ERROR_PIPE_CONNECTED ERROR_PIPE_LISTENING ERROR_EA_ACCESS_DENIED ERROR_OPERATION_ABORTED

996 997 998 999 1001 1002 1003 1004

ERROR_IO_INCOMPLETE ERROR_IO_PENDING ERROR_NOACCESS ERROR_SWAPERROR ERROR_STACK_OVERFLOW ERROR_INVALID_MESSAGE ERROR_CAN_NOT_COMPLETE ERROR_INVALID_FLAGS

1005

The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. The volume for a file has been externally altered so that the opened file is no longer valid. The requested operation cannot be performed in full-screen mode. An attempt was made to reference a token that does not exist. The configuration registry database is corrupt. The configuration registry key is invalid. The configuration registry key could not be opened. The configuration registry key could not be read. The configuration registry key could not be written. One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted. An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry. The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. Illegal operation attempted on a registry key that has been marked for deletion. System could not allocate the required space in a registry log.

ERROR_UNRECOGNIZED_VOLUME

1006

ERROR_FILE_INVALID

1007

ERROR_FULLSCREEN_MODE

1008

ERROR_NO_TOKEN

1009 1010 1011 1012 1013 1014

ERROR_BADDB ERROR_BADKEY ERROR_CANTOPEN ERROR_CANTREAD ERROR_CANTWRITE ERROR_REGISTRY_RECOVERED

1015

ERROR_REGISTRY_CORRUPT

1016

ERROR_REGISTRY_IO_FAILED

1017

ERROR_NOT_REGISTRY_FILE

1018

ERROR_KEY_DELETED

1019

ERROR_NO_LOG_SPACE

1021 1022

Cannot create a stable subkey under a volatile parent key. A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. A stop control has been sent to a service that other running services are dependent on. The requested control is not valid for this service. The service did not respond to the start or control request in a timely fashion. A thread could not be created for the service. The service database is locked. An instance of the service is already running. The account name is invalid or does not exist, or the password is invalid for the account name specified. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. Circular service dependency was specified. The specified service does not exist as an installed service. The service cannot accept control messages at this time. The service has not been started. The service process could not connect to the service controller. An exception occurred in the service when handling the control request. The database specified does not exist. The service has returned a service-specific error code. The process terminated unexpectedly. The dependency service or

ERROR_CHILD_MUST_BE_VOLATILE ERROR_NOTIFY_ENUM_DIR

1051

ERROR_DEPENDENT_SERVICES_RUNNING

1052 1053

ERROR_INVALID_SERVICE_CONTROL ERROR_SERVICE_REQUEST_TIMEOUT

1054 1055 1056 1057

ERROR_SERVICE_NO_THREAD ERROR_SERVICE_DATABASE_LOCKED ERROR_SERVICE_ALREADY_RUNNING ERROR_INVALID_SERVICE_ACCOUNT

1058

ERROR_SERVICE_DISABLED

1059 1060 1061 1062 1063

ERROR_CIRCULAR_DEPENDENCY ERROR_SERVICE_DOES_NOT_EXIST ERROR_SERVICE_CANNOT_ACCEPT_CTRL ERROR_SERVICE_NOT_ACTIVE ERROR_FAILED_SERVICE_CONTROLLER_CONNECT

1064

ERROR_EXCEPTION_IN_SERVICE

1065 1066 1067 1068

ERROR_DATABASE_DOES_NOT_EXIST ERROR_SERVICE_SPECIFIC_ERROR ERROR_PROCESS_ABORTED ERROR_SERVICE_DEPENDENCY_FAIL

group failed to start. 1069 1070 1071 1072 1073 1074 The service did not start due to a logon failure. After starting, the service hung in a start-pending state. The specified service database lock is invalid. The specified service has been marked for deletion. The specified service already exists. The system is currently running with the last-known-good configuration. The dependency service does not exist or has been marked for deletion. The current boot has already been accepted for use as the last-known-good control set. No attempts to start the service have been made since the last boot. The name is already in use as either a service name or a service display name. The account specified for this service is different from the account specified for other services running in the same process. Failure actions can only be set for Win32 services, not for drivers. This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly. No recovery program has been configured for this service. The executable program that this service is configured to run in does not implement the service. This service cannot be started in Safe Mode. The physical end of the tape has been reached. A tape access reached a ERROR_SERVICE_LOGON_FAILED ERROR_SERVICE_START_HANG ERROR_INVALID_SERVICE_LOCK ERROR_SERVICE_MARKED_FOR_DELETE ERROR_SERVICE_EXISTS ERROR_ALREADY_RUNNING_LKG

1075

ERROR_SERVICE_DEPENDENCY_DELETED

1076

ERROR_BOOT_ALREADY_ACCEPTED

1077

ERROR_SERVICE_NEVER_STARTED

1078

ERROR_DUPLICATE_SERVICE_NAME

1079

ERROR_DIFFERENT_SERVICE_ACCOUNT

1080

ERROR_CANNOT_DETECT_DRIVER_FAILURE

1081

ERROR_CANNOT_DETECT_PROCESS_ABORT

1082 1083

ERROR_NO_RECOVERY_PROGRAM ERROR_SERVICE_NOT_IN_EXE

1084 1100 1101

ERROR_NOT_SAFEBOOT_SERVICE ERROR_END_OF_MEDIA ERROR_FILEMARK_DETECTED

filemark. 1102 1103 1104 1105 1106 The beginning of the tape or a partition was encountered. A tape access reached the end of a set of files. No more data is on the tape. Tape could not be partitioned. When accessing a new tape of a multivolume partition, the current block size is incorrect. Tape partition information could not be found when loading a tape. Unable to lock the media eject mechanism. Unable to unload the media. The media in the drive may have changed. The I/O bus was reset. No media in drive. No mapping for the Unicode character exists in the target multi-byte code page. A dynamic link library (DLL) initialization routine failed. A system shutdown is in progress. Unable to abort the system shutdown because no shutdown was in progress. The request could not be performed because of an I/O device error. No serial device was successfully initialized. The serial driver will unload. Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) A serial I/O operation completed because the timeout period expired. (The ERROR_BEGINNING_OF_MEDIA ERROR_SETMARK_DETECTED ERROR_NO_DATA_DETECTED ERROR_PARTITION_FAILURE ERROR_INVALID_BLOCK_LENGTH

1107

ERROR_DEVICE_NOT_PARTITIONED

1108 1109 1110 1111 1112 1113

ERROR_UNABLE_TO_LOCK_MEDIA ERROR_UNABLE_TO_UNLOAD_MEDIA ERROR_MEDIA_CHANGED ERROR_BUS_RESET ERROR_NO_MEDIA_IN_DRIVE ERROR_NO_UNICODE_TRANSLATION

1114 1115 1116

ERROR_DLL_INIT_FAILED ERROR_SHUTDOWN_IN_PROGRESS ERROR_NO_SHUTDOWN_IN_PROGRESS

1117

ERROR_IO_DEVICE

1118

ERROR_SERIAL_NO_DEVICE

1119

ERROR_IRQ_BUSY

1120

ERROR_MORE_WRITES

1121

ERROR_COUNTER_TIMEOUT

IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) 1122 1123 No ID address mark was found on the floppy disk. Mismatch between the floppy disk sector ID field and the floppy disk controller track address. The floppy disk controller reported an error that is not recognized by the floppy disk driver. The floppy disk controller returned inconsistent results in its registers. While accessing the hard disk, a recalibrate operation failed, even after retries. While accessing the hard disk, a disk operation failed even after retries. While accessing the hard disk, a disk controller reset was needed, but even that failed. Physical end of tape encountered. Not enough server storage is available to process this command. A potential deadlock condition has been detected. The base address or the file offset specified does not have the proper alignment. An attempt to change the system power state was vetoed by another application or driver. The system BIOS failed an attempt to change the system power state. An attempt was made to create more links on a file than the file system supports. The specified program requires a newer version of Windows. The specified program is not a Windows or MS-DOS program. Cannot start more than one instance of the specified program. The specified program was ERROR_FLOPPY_ID_MARK_NOT_FOUND ERROR_FLOPPY_WRONG_CYLINDER

1124

ERROR_FLOPPY_UNKNOWN_ERROR

1125

ERROR_FLOPPY_BAD_REGISTERS

1126

ERROR_DISK_RECALIBRATE_FAILED

1127

ERROR_DISK_OPERATION_FAILED

1128

ERROR_DISK_RESET_FAILED

1129 1130

ERROR_EOM_OVERFLOW ERROR_NOT_ENOUGH_SERVER_MEMORY

1131 1132

ERROR_POSSIBLE_DEADLOCK ERROR_MAPPED_ALIGNMENT

1140

ERROR_SET_POWER_STATE_VETOED

1141

ERROR_SET_POWER_STATE_FAILED

1142

ERROR_TOO_MANY_LINKS

1150 1151 1152

ERROR_OLD_WIN_VERSION ERROR_APP_WRONG_OS ERROR_SINGLE_INSTANCE_APP

1153

ERROR_RMODE_APP

written for an earlier version of Windows. 1154 One of the library files needed to run this application is damaged. No application is associated with the specified file for this operation. An error occurred in sending the command to the application. One of the library files needed to run this application cannot be found. The current process has used all of its system allowance of handles for Window Manager objects. The message can be used only with synchronous operations. The indicated source element has no media. The indicated destination element already contains media. The indicated element does not exist. The indicated element is part of a magazine that is not present. The indicated device requires reinitialization due to hardware errors. The device has indicated that cleaning is required before further operations are attempted. The device has indicated that its door is open. The device is not connected. Element not found. There was no match for the specified key in the index. The property set specified does not exist on the object. The point passed to GetMouseMovePointsEx is not in the buffer. The tracking (workstation) service is not running. The Volume ID could not be ERROR_INVALID_DLL

1155

ERROR_NO_ASSOCIATION

1156

ERROR_DDE_FAIL

1157

ERROR_DLL_NOT_FOUND

1158

ERROR_NO_MORE_USER_HANDLES

1159 1160 1161

ERROR_MESSAGE_SYNC_ONLY ERROR_SOURCE_ELEMENT_EMPTY ERROR_DESTINATION_ELEMENT_FULL

1162 1163 1164

ERROR_ILLEGAL_ELEMENT_ADDRESS ERROR_MAGAZINE_NOT_PRESENT ERROR_DEVICE_REINITIALIZATION_NEEDED

1165

ERROR_DEVICE_REQUIRES_CLEANING

1166 1167 1168 1169 1170 1171

ERROR_DEVICE_DOOR_OPEN ERROR_DEVICE_NOT_CONNECTED ERROR_NOT_FOUND ERROR_NO_MATCH ERROR_SET_NOT_FOUND ERROR_POINT_NOT_FOUND

1172 1173

ERROR_NO_TRACKING_SERVICE ERROR_NO_VOLUME_ID

found. 1175 1176 Unable to remove the file to be replaced. Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name. Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name. The volume change journal is being deleted. The volume change journal service is not active. A file was found, but it may not be the correct file. The journal entry has been deleted from the journal. The specified device name is invalid. The device is not currently connected but it is a remembered connection. The local device name has a remembered connection to another network resource. No network provider accepted the given network path. The specified network provider name is invalid. Unable to open the network connection profile. The network connection profile is corrupted. Cannot enumerate a noncontainer. An extended error has occurred. The format of the specified group name is invalid. The format of the specified computer name is invalid. The format of the specified event name is invalid. The format of the specified domain name is invalid. ERROR_UNABLE_TO_REMOVE_REPLACED ERROR_UNABLE_TO_MOVE_REPLACEMENT

1177

ERROR_UNABLE_TO_MOVE_REPLACEMENT_2

1178 1179 1180 1181 1200 1201

ERROR_JOURNAL_DELETE_IN_PROGRESS ERROR_JOURNAL_NOT_ACTIVE ERROR_POTENTIAL_FILE_FOUND ERROR_JOURNAL_ENTRY_DELETED ERROR_BAD_DEVICE ERROR_CONNECTION_UNAVAIL

1202

ERROR_DEVICE_ALREADY_REMEMBERED

1203 1204 1205 1206 1207 1208 1209 1210 1211 1212

ERROR_NO_NET_OR_BAD_PATH ERROR_BAD_PROVIDER ERROR_CANNOT_OPEN_PROFILE ERROR_BAD_PROFILE ERROR_NOT_CONTAINER ERROR_EXTENDED_ERROR ERROR_INVALID_GROUPNAME ERROR_INVALID_COMPUTERNAME ERROR_INVALID_EVENTNAME ERROR_INVALID_DOMAINNAME

1213 1214 1215 1216 1217 1218 1219

The format of the specified service name is invalid. The format of the specified network name is invalid. The format of the specified share name is invalid. The format of the specified password is invalid. The format of the specified message name is invalid. The format of the specified message destination is invalid. The credentials supplied conflict with an existing set of credentials. An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. The workgroup or domain name is already in use by another computer on the network. The network is not present or not started. The operation was canceled by the user. The requested operation cannot be performed on a file with a user-mapped section open. The remote system refused the network connection. The network connection was gracefully closed. The network transport endpoint already has an address associated with it. An address has not yet been associated with the network endpoint. An operation was attempted on a nonexistent network connection. An invalid operation was attempted on an active network connection. The network location cannot be reached. For information about network troubleshooting, see Windows Help. The network location cannot be

ERROR_INVALID_SERVICENAME ERROR_INVALID_NETNAME ERROR_INVALID_SHARENAME ERROR_INVALID_PASSWORDNAME ERROR_INVALID_MESSAGENAME ERROR_INVALID_MESSAGEDEST ERROR_SESSION_CREDENTIAL_CONFLICT

1220

ERROR_REMOTE_SESSION_LIMIT_EXCEEDED

1221

ERROR_DUP_DOMAINNAME

1222 1223 1224

ERROR_NO_NETWORK ERROR_CANCELLED ERROR_USER_MAPPED_FILE

1225 1226 1227

ERROR_CONNECTION_REFUSED ERROR_GRACEFUL_DISCONNECT ERROR_ADDRESS_ALREADY_ASSOCIATED

1228

ERROR_ADDRESS_NOT_ASSOCIATED

1229

ERROR_CONNECTION_INVALID

1230

ERROR_CONNECTION_ACTIVE

1231

ERROR_NETWORK_UNREACHABLE

1232

ERROR_HOST_UNREACHABLE

reached. For information about network troubleshooting, see Windows Help. 1233 The network location cannot be reached. For information about network troubleshooting, see Windows Help. No service is operating at the destination network endpoint on the remote system. The request was aborted. The network connection was aborted by the local system. The operation could not be completed. A retry should be performed. A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. Attempting to log in during an unauthorized time of day for this account. The account is not authorized to log in from this station. The network address could not be used for the operation requested. The service is already registered. The specified service does not exist. The operation being requested was not performed because the user has not been authenticated. The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. Continue with work in progress. An attempt was made to perform an initialization operation when initialization has already been completed. No more local devices. The specified site does not exist. A domain controller with the specified name already exists. ERROR_PROTOCOL_UNREACHABLE

1234

ERROR_PORT_UNREACHABLE

1235 1236 1237

ERROR_REQUEST_ABORTED ERROR_CONNECTION_ABORTED ERROR_RETRY

1238

ERROR_CONNECTION_COUNT_LIMIT

1239

ERROR_LOGIN_TIME_RESTRICTION

1240 1241

ERROR_LOGIN_WKSTA_RESTRICTION ERROR_INCORRECT_ADDRESS

1242 1243 1244

ERROR_ALREADY_REGISTERED ERROR_SERVICE_NOT_FOUND ERROR_NOT_AUTHENTICATED

1245

ERROR_NOT_LOGGED_ON

1246 1247

ERROR_CONTINUE ERROR_ALREADY_INITIALIZED

1248 1249 1250

ERROR_NO_MORE_DEVICES ERROR_NO_SUCH_SITE ERROR_DOMAIN_CONTROLLER_EXISTS

1251

This operation is supported only when you are connected to the server. The group policy framework should call the extension even if there are no changes. The specified user does not have a valid profile. This operation is not supported on a Microsoft Small Business Server. The server machine is shutting down. The remote system is not available. For information about network troubleshooting, see Windows Help. The security identifier provided is not from an account domain. The security identifier provided does not have a domain component. Not all privileges referenced are assigned to the caller. Some mapping between account names and security IDs was not done. No system quota limits are specifically set for this account. No encryption key is available. A well-known encryption key was returned. The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. The revision level is unknown. Indicates two revision levels are incompatible. This security ID may not be assigned as the owner of this object. This security ID may not be assigned as the primary group of an object. An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. The group may not be disabled.

ERROR_ONLY_IF_CONNECTED

1252

ERROR_OVERRIDE_NOCHANGES

1253 1254

ERROR_BAD_USER_PROFILE ERROR_NOT_SUPPORTED_ON_SBS

1255 1256

ERROR_SERVER_SHUTDOWN_IN_PROGRESS ERROR_HOST_DOWN

1257 1258

ERROR_NON_ACCOUNT_SID ERROR_NON_DOMAIN_SID

1300 1301

ERROR_NOT_ALL_ASSIGNED ERROR_SOME_NOT_MAPPED

1302 1303

ERROR_NO_QUOTAS_FOR_ACCOUNT ERROR_LOCAL_USER_SESSION_KEY

1304

ERROR_NULL_LM_PASSWORD

1305 1306 1307

ERROR_UNKNOWN_REVISION ERROR_REVISION_MISMATCH ERROR_INVALID_OWNER

1308

ERROR_INVALID_PRIMARY_GROUP

1309

ERROR_NO_IMPERSONATION_TOKEN

1310

ERROR_CANT_DISABLE_MANDATORY

1311

There are currently no logon servers available to service the logon request. A specified logon session does not exist. It may already have been terminated. A specified privilege does not exist. A required privilege is not held by the client. The name provided is not a properly formed account name. The specified user already exists. The specified user does not exist. The specified group already exists. The specified group does not exist. Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. The specified user account is not a member of the specified group account. The last remaining administration account cannot be disabled or deleted. Unable to update the password. The value provided as the current password is incorrect. Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain. Logon failure: unknown user name or bad password. Logon failure: user account restriction. Logon failure: account logon time restriction violation. Logon failure: user not allowed to log on to this computer.

ERROR_NO_LOGON_SERVERS

1312

ERROR_NO_SUCH_LOGON_SESSION

1313 1314 1315 1316 1317 1318 1319 1320

ERROR_NO_SUCH_PRIVILEGE ERROR_PRIVILEGE_NOT_HELD ERROR_INVALID_ACCOUNT_NAME ERROR_USER_EXISTS ERROR_NO_SUCH_USER ERROR_GROUP_EXISTS ERROR_NO_SUCH_GROUP ERROR_MEMBER_IN_GROUP

1321

ERROR_MEMBER_NOT_IN_GROUP

1322

ERROR_LAST_ADMIN

1323

ERROR_WRONG_PASSWORD

1324

ERROR_ILL_FORMED_PASSWORD

1325

ERROR_PASSWORD_RESTRICTION

1326 1327 1328 1329

ERROR_LOGON_FAILURE ERROR_ACCOUNT_RESTRICTION ERROR_INVALID_LOGON_HOURS ERROR_INVALID_WORKSTATION

1330 1331 1332

Logon failure: the specified account password has expired. Logon failure: account currently disabled. No mapping between account names and security IDs was done. Too many local user identifiers (LUIDs) were requested at one time. No more local user identifiers (LUIDs) are available. The subauthority part of a security ID is invalid for this particular use. The access control list (ACL) structure is invalid. The security ID structure is invalid. The security descriptor structure is invalid. The inherited access control list (ACL) or access control entry (ACE) could not be built. The server is currently disabled. The server is currently enabled. The value provided was an invalid value for an identifier authority. No more memory is available for security information updates. The specified attributes are invalid, or incompatible with the attributes for the group as a whole. Either a required impersonation level was not provided, or the provided impersonation level is invalid. Cannot open an anonymous level security token. The validation information class requested was invalid. The type of the token is inappropriate for its attempted use. Unable to perform a security operation on an object that has no associated security.

ERROR_PASSWORD_EXPIRED ERROR_ACCOUNT_DISABLED ERROR_NONE_MAPPED

1333

ERROR_TOO_MANY_LUIDS_REQUESTED

1334 1335

ERROR_LUIDS_EXHAUSTED ERROR_INVALID_SUB_AUTHORITY

1336 1337 1338 1340

ERROR_INVALID_ACL ERROR_INVALID_SID ERROR_INVALID_SECURITY_DESCR ERROR_BAD_INHERITANCE_ACL

1341 1342 1343

ERROR_SERVER_DISABLED ERROR_SERVER_NOT_DISABLED ERROR_INVALID_ID_AUTHORITY

1344

ERROR_ALLOTTED_SPACE_EXCEEDED

1345

ERROR_INVALID_GROUP_ATTRIBUTES

1346

ERROR_BAD_IMPERSONATION_LEVEL

1347 1348 1349

ERROR_CANT_OPEN_ANONYMOUS ERROR_BAD_VALIDATION_CLASS ERROR_BAD_TOKEN_TYPE

1350

ERROR_NO_SECURITY_ON_OBJECT

1351

Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. The domain was in the wrong state to perform the security operation. This operation is only allowed for the Primary Domain Controller of the domain. The specified domain either does not exist or could not be contacted. The specified domain already exists. An attempt was made to exceed the limit on the number of domains per server. Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. An internal error occurred. Generic access types were contained in an access mask which should already be mapped to nongeneric types. A security descriptor is not in the right format (absolute or self-relative). The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. Cannot start a new logon session with an ID that is already in use. A specified authentication package is unknown. The logon session is not in a state that is consistent with the requested operation. The logon session ID is already in use. A logon request contained an

ERROR_CANT_ACCESS_DOMAIN_INFO

1352

ERROR_INVALID_SERVER_STATE

1353

ERROR_INVALID_DOMAIN_STATE

1354

ERROR_INVALID_DOMAIN_ROLE

1355

ERROR_NO_SUCH_DOMAIN

1356 1357

ERROR_DOMAIN_EXISTS ERROR_DOMAIN_LIMIT_EXCEEDED

1358

ERROR_INTERNAL_DB_CORRUPTION

1359 1360

ERROR_INTERNAL_ERROR ERROR_GENERIC_NOT_MAPPED

1361

ERROR_BAD_DESCRIPTOR_FORMAT

1362

ERROR_NOT_LOGON_PROCESS

1363

ERROR_LOGON_SESSION_EXISTS

1364 1365

ERROR_NO_SUCH_PACKAGE ERROR_BAD_LOGON_SESSION_STATE

1366 1367

ERROR_LOGON_SESSION_COLLISION ERROR_INVALID_LOGON_TYPE

invalid logon type value. 1368 Unable to impersonate using a named pipe until data has been read from that pipe. The transaction state of a registry subtree is incompatible with the requested operation. An internal security database corruption has been encountered. Cannot perform this operation on built-in accounts. Cannot perform this operation on this built-in special group. Cannot perform this operation on this built-in special user. The user cannot be removed from a group because the group is currently the user's primary group. The token is already in use as a primary token. The specified local group does not exist. The specified account name is not a member of the local group. The specified account name is already a member of the local group. The specified local group already exists. Logon failure: the user has not been granted the requested logon type at this computer. The maximum number of secrets that may be stored in a single system has been exceeded. The length of a secret exceeds the maximum length allowed. The local security authority database contains an internal inconsistency. During a logon attempt, the user's security context accumulated too many security IDs. Logon failure: the user has not been granted the requested logon type at this computer. ERROR_CANNOT_IMPERSONATE

1369

ERROR_RXACT_INVALID_STATE

1370

ERROR_RXACT_COMMIT_FAILURE

1371 1372 1373 1374

ERROR_SPECIAL_ACCOUNT ERROR_SPECIAL_GROUP ERROR_SPECIAL_USER ERROR_MEMBERS_PRIMARY_GROUP

1375 1376 1377

ERROR_TOKEN_ALREADY_IN_USE ERROR_NO_SUCH_ALIAS ERROR_MEMBER_NOT_IN_ALIAS

1378

ERROR_MEMBER_IN_ALIAS

1379 1380

ERROR_ALIAS_EXISTS ERROR_LOGON_NOT_GRANTED

1381

ERROR_TOO_MANY_SECRETS

1382 1383

ERROR_SECRET_TOO_LONG ERROR_INTERNAL_DB_ERROR

1384

ERROR_TOO_MANY_CONTEXT_IDS

1385

ERROR_LOGON_TYPE_NOT_GRANTED

1386

A cross-encrypted password is necessary to change a user password. A new member could not be added to or removed from the local group because the member does not exist. A new member could not be added to a local group because the member has the wrong account type. Too many security IDs have been specified. A cross-encrypted password is necessary to change this user password. Indicates an ACL contains no inheritable components. The file or directory is corrupted and unreadable. The disk structure is corrupted and unreadable. There is no user session key for the specified logon session. The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. Logon Failure: The target account name is incorrect. Mutual Authentication failed. The server's password is out of date at the domain controller. There is a time difference between the client and server. This operation can not be performed on the current domain. Invalid window handle. Invalid menu handle. Invalid cursor handle. Invalid accelerator table handle. Invalid hook handle. Invalid handle to a multiplewindow position structure.

ERROR_NT_CROSS_ENCRYPTION_REQUIRED

1387

ERROR_NO_SUCH_MEMBER

1388

ERROR_INVALID_MEMBER

1389 1390

ERROR_TOO_MANY_SIDS ERROR_LM_CROSS_ENCRYPTION_REQUIRED

1391 1392 1393 1394 1395

ERROR_NO_INHERITANCE ERROR_FILE_CORRUPT ERROR_DISK_CORRUPT ERROR_NO_USER_SESSION_KEY ERROR_LICENSE_QUOTA_EXCEEDED

1396 1397

ERROR_WRONG_TARGET_NAME ERROR_MUTUAL_AUTH_FAILED

1398 1399

ERROR_TIME_SKEW ERROR_CURRENT_DOMAIN_NOT_ALLOWED

1400 1401 1402 1403 1404 1405

ERROR_INVALID_WINDOW_HANDLE ERROR_INVALID_MENU_HANDLE ERROR_INVALID_CURSOR_HANDLE ERROR_INVALID_ACCEL_HANDLE ERROR_INVALID_HOOK_HANDLE ERROR_INVALID_DWP_HANDLE

1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422

Cannot create a top-level child window. Cannot find window class. Invalid window; it belongs to other thread. Hot key is already registered. Class already exists. Class does not exist. Class still has open windows. Invalid index. Invalid icon handle. Using private DIALOG window words. The list box identifier was not found. No wildcards were found. Thread does not have a clipboard open. Hot key is not registered. The window is not a valid dialog window. Control ID not found. Invalid message for a combo box because it does not have an edit control. The window is not a combo box. Height must be less than 256. Invalid device context (DC) handle. Invalid hook procedure type. Invalid hook procedure. Cannot set nonlocal hook without a module handle. This hook procedure can only be set globally. The journal hook procedure is already installed. The hook procedure is not installed. Invalid message for singleselection list box. LB_SETCOUNT sent to non-lazy list box.

ERROR_TLW_WITH_WSCHILD ERROR_CANNOT_FIND_WND_CLASS ERROR_WINDOW_OF_OTHER_THREAD ERROR_HOTKEY_ALREADY_REGISTERED ERROR_CLASS_ALREADY_EXISTS ERROR_CLASS_DOES_NOT_EXIST ERROR_CLASS_HAS_WINDOWS ERROR_INVALID_INDEX ERROR_INVALID_ICON_HANDLE ERROR_PRIVATE_DIALOG_INDEX ERROR_LISTBOX_ID_NOT_FOUND ERROR_NO_WILDCARD_CHARACTERS ERROR_CLIPBOARD_NOT_OPEN ERROR_HOTKEY_NOT_REGISTERED ERROR_WINDOW_NOT_DIALOG ERROR_CONTROL_ID_NOT_FOUND ERROR_INVALID_COMBOBOX_MESSAGE

1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433

ERROR_WINDOW_NOT_COMBOBOX ERROR_INVALID_EDIT_HEIGHT ERROR_DC_NOT_FOUND ERROR_INVALID_HOOK_FILTER ERROR_INVALID_FILTER_PROC ERROR_HOOK_NEEDS_HMOD ERROR_GLOBAL_ONLY_HOOK ERROR_JOURNAL_HOOK_SET ERROR_HOOK_NOT_INSTALLED ERROR_INVALID_LB_MESSAGE ERROR_SETCOUNT_ON_BAD_LB

1434 1435 1436 1437 1438 1439 1440 1441

This list box does not support tab stops. Cannot destroy object created by another thread. Child windows cannot have menus. The window does not have a system menu. Invalid message box style. Invalid system-wide (SPI_*) parameter. Screen already locked. All handles to windows in a multiple-window position structure must have the same parent. The window is not a child window. Invalid GW_* command. Invalid thread identifier. Cannot process a message from a window that is not a multiple document interface (MDI) window. Popup menu already active. The window does not have scroll bars. Scroll bar range cannot be greater than MAXLONG. Cannot show or remove the window in the way specified. Insufficient system resources exist to complete the requested service. Insufficient system resources exist to complete the requested service. Insufficient system resources exist to complete the requested service. Insufficient quota to complete the requested service. Insufficient quota to complete the requested service. The paging file is too small for this operation to complete. A menu item was not found. Invalid keyboard layout handle.

ERROR_LB_WITHOUT_TABSTOPS ERROR_DESTROY_OBJECT_OF_OTHER_THREAD ERROR_CHILD_WINDOW_MENU ERROR_NO_SYSTEM_MENU ERROR_INVALID_MSGBOX_STYLE ERROR_INVALID_SPI_VALUE ERROR_SCREEN_ALREADY_LOCKED ERROR_HWNDS_HAVE_DIFF_PARENT

1442 1443 1444 1445

ERROR_NOT_CHILD_WINDOW ERROR_INVALID_GW_COMMAND ERROR_INVALID_THREAD_ID ERROR_NON_MDICHILD_WINDOW

1446 1447 1448 1449 1450

ERROR_POPUP_ALREADY_ACTIVE ERROR_NO_SCROLLBARS ERROR_INVALID_SCROLLBAR_RANGE ERROR_INVALID_SHOWWIN_COMMAND ERROR_NO_SYSTEM_RESOURCES

1451

ERROR_NONPAGED_SYSTEM_RESOURCES

1452

ERROR_PAGED_SYSTEM_RESOURCES

1453 1454 1455 1456 1457

ERROR_WORKING_SET_QUOTA ERROR_PAGEFILE_QUOTA ERROR_COMMITMENT_LIMIT ERROR_MENU_ITEM_NOT_FOUND ERROR_INVALID_KEYBOARD_HANDLE

1458 1459 1460

Hook type not allowed. This operation requires an interactive window station. This operation returned because the timeout period expired. Invalid monitor handle. The event log file is corrupted. No event log file could be opened, so the event logging service did not start. The event log file is full. The event log file has changed between read operations. The Windows Installer service could not be accessed. Contact your support personnel to verify that the Windows Installer service is properly registered. User cancelled installation. Fatal error during installation. Installation suspended, incomplete. This action is only valid for products that are currently installed. Feature ID not registered. Component ID not registered. Unknown property. Handle is in an invalid state. The configuration data for this product is corrupt. Contact your support personnel. Component qualifier not present. The installation source for this product is not available. Verify that the source exists and that you can access it. This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. Product is uninstalled. SQL query syntax invalid or

ERROR_HOOK_TYPE_NOT_ALLOWED ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION ERROR_TIMEOUT

1461 1500 1501

ERROR_INVALID_MONITOR_HANDLE ERROR_EVENTLOG_FILE_CORRUPT ERROR_EVENTLOG_CANT_START

1502 1503 1601

ERROR_LOG_FILE_FULL ERROR_EVENTLOG_FILE_CHANGED ERROR_INSTALL_SERVICE_FAILURE

1602 1603 1604 1605

ERROR_INSTALL_USEREXIT ERROR_INSTALL_FAILURE ERROR_INSTALL_SUSPEND ERROR_UNKNOWN_PRODUCT

1606 1607 1608 1609 1610

ERROR_UNKNOWN_FEATURE ERROR_UNKNOWN_COMPONENT ERROR_UNKNOWN_PROPERTY ERROR_INVALID_HANDLE_STATE ERROR_BAD_CONFIGURATION

1611 1612

ERROR_INDEX_ABSENT ERROR_INSTALL_SOURCE_ABSENT

1613

ERROR_INSTALL_PACKAGE_VERSION

1614 1615

ERROR_PRODUCT_UNINSTALLED ERROR_BAD_QUERY_SYNTAX

unsupported. 1616 1617 1618 Record field does not exist. The device has been removed. Another installation is already in progress. Complete that installation before proceeding with this install. This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. There was an error starting the Windows Installer service user interface. Contact your support personnel. Error opening installation log file. Verify that the specified log file location exists and that you can write to it. The language of this installation package is not supported by your system. Error applying transforms. Verify that the specified transform paths are valid. This installation is forbidden by system policy. Contact your system administrator. Function could not be executed. Function failed during execution. Invalid or unknown table specified. Data supplied is of wrong type. Data of this type is not supported. The Windows Installer service failed to start. Contact your support personnel. The temp folder is either full or inaccessible. Verify that the temp folder exists and that you can write to it. This installation package is not ERROR_INVALID_FIELD ERROR_DEVICE_REMOVED ERROR_INSTALL_ALREADY_RUNNING

1619

ERROR_INSTALL_PACKAGE_OPEN_FAILED

1620

ERROR_INSTALL_PACKAGE_INVALID

1621

ERROR_INSTALL_UI_FAILURE

1622

ERROR_INSTALL_LOG_FAILURE

1623

ERROR_INSTALL_LANGUAGE_UNSUPPORTED

1624

ERROR_INSTALL_TRANSFORM_FAILURE

1625

ERROR_INSTALL_PACKAGE_REJECTED

1626 1627 1628 1629 1630 1631

ERROR_FUNCTION_NOT_CALLED ERROR_FUNCTION_FAILED ERROR_INVALID_TABLE ERROR_DATATYPE_MISMATCH ERROR_UNSUPPORTED_TYPE ERROR_CREATE_FAILED

1632

ERROR_INSTALL_TEMP_UNWRITABLE

1633

ERROR_INSTALL_PLATFORM_UNSUPPORTED

supported by this processor type. Contact your product vendor. 1634 1635 Component not used on this computer. This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package. This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel. Invalid command line argument. Consult the Windows Installer SDK for detailed command line help. Only administrators have permission to add, remove, or configure server software during a Terminal Services remote session. If you want to install or configure software on the server, contact your network administrator. The requested operation completed successfully. The system will be restarted so the changes can take effect. The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. ERROR_INSTALL_NOTUSED ERROR_PATCH_PACKAGE_OPEN_FAILED

1636

ERROR_PATCH_PACKAGE_INVALID

1637

ERROR_PATCH_PACKAGE_UNSUPPORTED.

1638

ERROR_PRODUCT_VERSION

1639

ERROR_INVALID_COMMAND_LINE

1640

ERROR_INSTALL_REMOTE_DISALLOWED

1641

ERROR_SUCCESS_REBOOT_INITIATED

1642

ERROR_PATCH_TARGET_NOT_FOUND

1643

The patch package is not permitted by system policy. It is not signed with an appropriate certificate. One or more customizations are not permitted by system policy. They are not signed with an appropriate certificate. The string binding is invalid. The binding handle is not the correct type. The binding handle is invalid. The RPC protocol sequence is not supported. The RPC protocol sequence is invalid. The string universal unique identifier (UUID) is invalid. The endpoint format is invalid. The network address is invalid. No endpoint was found. The timeout value is invalid. The object universal unique identifier (UUID) was not found. The object universal unique identifier (UUID) has already been registered. The type universal unique identifier (UUID) has already been registered. The RPC server is already listening. No protocol sequences have been registered. The RPC server is not listening. The manager type is unknown. The interface is unknown. There are no bindings. There are no protocol sequences. The endpoint cannot be created. Not enough resources are available to complete this operation. The RPC server is unavailable.

ERROR_PATCH_PACKAGE_REJECTED

1644

ERROR_INSTALL_TRANSFORM_REJECTED

1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710

RPC_S_INVALID_STRING_BINDING RPC_S_WRONG_KIND_OF_BINDING RPC_S_INVALID_BINDING RPC_S_PROTSEQ_NOT_SUPPORTED RPC_S_INVALID_RPC_PROTSEQ RPC_S_INVALID_STRING_UUID RPC_S_INVALID_ENDPOINT_FORMAT RPC_S_INVALID_NET_ADDR RPC_S_NO_ENDPOINT_FOUND RPC_S_INVALID_TIMEOUT RPC_S_OBJECT_NOT_FOUND

1711

RPC_S_ALREADY_REGISTERED

1712

RPC_S_TYPE_ALREADY_REGISTERED

1713 1714 1715 1716 1717 1718 1719 1720 1721

RPC_S_ALREADY_LISTENING RPC_S_NO_PROTSEQS_REGISTERED RPC_S_NOT_LISTENING RPC_S_UNKNOWN_MGR_TYPE RPC_S_UNKNOWN_IF RPC_S_NO_BINDINGS RPC_S_NO_PROTSEQS RPC_S_CANT_CREATE_ENDPOINT RPC_S_OUT_OF_RESOURCES

1722

RPC_S_SERVER_UNAVAILABLE

1723 1724 1725 1726 1727 1728 1730 1732 1733 1734 1735 1736 1737 1739

The RPC server is too busy to complete this operation. The network options are invalid. There are no remote procedure calls active on this thread. The remote procedure call failed. The remote procedure call failed and did not execute. A remote procedure call (RPC) protocol error occurred. The transfer syntax is not supported by the RPC server. The universal unique identifier (UUID) type is not supported. The tag is invalid. The array bounds are invalid. The binding does not contain an entry name. The name syntax is invalid. The name syntax is not supported. No network address is available to use to construct a universal unique identifier (UUID). The endpoint is a duplicate. The authentication type is unknown. The maximum number of calls is too small. The string is too long. The RPC protocol sequence was not found. The procedure number is out of range. The binding does not contain any authentication information. The authentication service is unknown. The authentication level is unknown. The security context is invalid. The authorization service is unknown. The entry is invalid.

RPC_S_SERVER_TOO_BUSY RPC_S_INVALID_NETWORK_OPTIONS RPC_S_NO_CALL_ACTIVE RPC_S_CALL_FAILED RPC_S_CALL_FAILED_DNE RPC_S_PROTOCOL_ERROR RPC_S_UNSUPPORTED_TRANS_SYN RPC_S_UNSUPPORTED_TYPE RPC_S_INVALID_TAG RPC_S_INVALID_BOUND RPC_S_NO_ENTRY_NAME RPC_S_INVALID_NAME_SYNTAX RPC_S_UNSUPPORTED_NAME_SYNTAX RPC_S_UUID_NO_ADDRESS

1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751

RPC_S_DUPLICATE_ENDPOINT RPC_S_UNKNOWN_AUTHN_TYPE RPC_S_MAX_CALLS_TOO_SMALL RPC_S_STRING_TOO_LONG RPC_S_PROTSEQ_NOT_FOUND RPC_S_PROCNUM_OUT_OF_RANGE RPC_S_BINDING_HAS_NO_AUTH RPC_S_UNKNOWN_AUTHN_SERVICE RPC_S_UNKNOWN_AUTHN_LEVEL RPC_S_INVALID_AUTH_IDENTITY RPC_S_UNKNOWN_AUTHZ_SERVICE EPT_S_INVALID_ENTRY

1752 1753

The server endpoint cannot perform the operation. There are no more endpoints available from the endpoint mapper. No interfaces have been exported. The entry name is incomplete. The version option is invalid. There are no more members. There is nothing to unexport. The interface was not found. The entry already exists. The entry is not found. The name service is unavailable. The network address family is invalid. The requested operation is not supported. No security context is available to allow impersonation. An internal error occurred in a remote procedure call (RPC). The RPC server attempted an integer division by zero. An addressing error occurred in the RPC server. A floating-point operation at the RPC server caused a division by zero. A floating-point underflow occurred at the RPC server. A floating-point overflow occurred at the RPC server. The list of RPC servers available for the binding of auto handles has been exhausted. Unable to open the character translation table file. The file containing the character translation table has fewer than 512 bytes. A null context handle was passed from the client to the host during a remote procedure call.

EPT_S_CANT_PERFORM_OP EPT_S_NOT_REGISTERED

1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769

RPC_S_NOTHING_TO_EXPORT RPC_S_INCOMPLETE_NAME RPC_S_INVALID_VERS_OPTION RPC_S_NO_MORE_MEMBERS RPC_S_NOT_ALL_OBJS_UNEXPORTED RPC_S_INTERFACE_NOT_FOUND RPC_S_ENTRY_ALREADY_EXISTS RPC_S_ENTRY_NOT_FOUND RPC_S_NAME_SERVICE_UNAVAILABLE RPC_S_INVALID_NAF_ID RPC_S_CANNOT_SUPPORT RPC_S_NO_CONTEXT_AVAILABLE RPC_S_INTERNAL_ERROR RPC_S_ZERO_DIVIDE RPC_S_ADDRESS_ERROR RPC_S_FP_DIV_ZERO

1770 1771 1772

RPC_S_FP_UNDERFLOW RPC_S_FP_OVERFLOW RPC_X_NO_MORE_ENTRIES

1773 1774

RPC_X_SS_CHAR_TRANS_OPEN_FAIL RPC_X_SS_CHAR_TRANS_SHORT_FILE

1775

RPC_X_SS_IN_NULL_CONTEXT

1777 1778

The context handle changed during a remote procedure call. The binding handles passed to a remote procedure call do not match. The stub is unable to get the remote procedure call handle. A null reference pointer was passed to the stub. The enumeration value is out of range. The byte count is too small. The stub received bad data. The supplied user buffer is not valid for the requested operation. The disk media is not recognized. It may not be formatted. The workstation does not have a trust secret. The security database on the server does not have a computer account for this workstation trust relationship. The trust relationship between the primary domain and the trusted domain failed. The trust relationship between this workstation and the primary domain failed. The network logon failed. A remote procedure call is already in progress for this thread. An attempt was made to logon, but the network logon service was not started. The user's account has expired. The redirector is in use and cannot be unloaded. The specified printer driver is already installed. The specified port is unknown. The printer driver is unknown. The print processor is unknown. The specified separator file is invalid.

RPC_X_SS_CONTEXT_DAMAGED RPC_X_SS_HANDLES_MISMATCH

1779 1780 1781 1782 1783 1784

RPC_X_SS_CANNOT_GET_CALL_HANDLE RPC_X_NULL_REF_POINTER RPC_X_ENUM_VALUE_OUT_OF_RANGE RPC_X_BYTE_COUNT_TOO_SMALL RPC_X_BAD_STUB_DATA ERROR_INVALID_USER_BUFFER

1785

ERROR_UNRECOGNIZED_MEDIA

1786 1787

ERROR_NO_TRUST_LSA_SECRET ERROR_NO_TRUST_SAM_ACCOUNT

1788

ERROR_TRUSTED_DOMAIN_FAILURE

1789

ERROR_TRUSTED_RELATIONSHIP_FAILURE

1790 1791

ERROR_TRUST_FAILURE RPC_S_CALL_IN_PROGRESS

1792

ERROR_NETLOGON_NOT_STARTED

1793 1794 1795 1796 1797 1798 1799

ERROR_ACCOUNT_EXPIRED ERROR_REDIRECTOR_HAS_OPEN_HANDLES ERROR_PRINTER_DRIVER_ALREADY_INSTALLED ERROR_UNKNOWN_PORT ERROR_UNKNOWN_PRINTER_DRIVER ERROR_UNKNOWN_PRINTPROCESSOR ERROR_INVALID_SEPARATOR_FILE

1800 1801 1802 1803 1804 1805 1806 1807

The specified priority is invalid. The printer name is invalid. The printer already exists. The printer command is invalid. The specified datatype is invalid. The environment specified is invalid. There are no more bindings. The account used is an interdomain trust account. Use your global user account or local user account to access this server. The account used is a computer account. Use your global user account or local user account to access this server. The account used is a server trust account. Use your global user account or local user account to access this server. The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain. The server is in use and cannot be unloaded. The specified image file did not contain a resource section. The specified resource type cannot be found in the image file. The specified resource name cannot be found in the image file. The specified resource language ID cannot be found in the image file. Not enough quota is available to process this command. No interfaces have been registered. The remote procedure call was cancelled. The binding handle does not contain all required information. A communications failure occurred during a remote

ERROR_INVALID_PRIORITY ERROR_INVALID_PRINTER_NAME ERROR_PRINTER_ALREADY_EXISTS ERROR_INVALID_PRINTER_COMMAND ERROR_INVALID_DATATYPE ERROR_INVALID_ENVIRONMENT RPC_S_NO_MORE_BINDINGS ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT

1808

ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT

1809

ERROR_NOLOGON_SERVER_TRUST_ACCOUNT

1810

ERROR_DOMAIN_TRUST_INCONSISTENT

1811 1812 1813

ERROR_SERVER_HAS_OPEN_HANDLES ERROR_RESOURCE_DATA_NOT_FOUND ERROR_RESOURCE_TYPE_NOT_FOUND

1814

ERROR_RESOURCE_NAME_NOT_FOUND

1815

ERROR_RESOURCE_LANG_NOT_FOUND

1816 1817 1818 1819

ERROR_NOT_ENOUGH_QUOTA RPC_S_NO_INTERFACES RPC_S_CALL_CANCELLED RPC_S_BINDING_INCOMPLETE

1820

RPC_S_COMM_FAILURE

procedure call. 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 The requested authentication level is not supported. No principal name registered. The error specified is not a valid Windows RPC error code. A UUID that is valid only on this computer has been allocated. A security package specific error occurred. Thread is not canceled. Invalid operation on the encoding/decoding handle. Incompatible version of the serializing package. Incompatible version of the RPC stub. The RPC pipe object is invalid or corrupted. An invalid operation was attempted on an RPC pipe object. Unsupported RPC pipe version. The group member was not found. The endpoint mapper database entry could not be created. The object universal unique identifier (UUID) is the nil UUID. The specified time is invalid. The specified form name is invalid. The specified form size is invalid. The specified printer handle is already being waited on The specified printer has been deleted. The state of the printer is invalid. The user's password must be changed before logging on the first time. Could not find the domain controller for this domain. The referenced account is RPC_S_UNSUPPORTED_AUTHN_LEVEL RPC_S_NO_PRINC_NAME RPC_S_NOT_RPC_ERROR RPC_S_UUID_LOCAL_ONLY RPC_S_SEC_PKG_ERROR RPC_S_NOT_CANCELLED RPC_X_INVALID_ES_ACTION RPC_X_WRONG_ES_VERSION RPC_X_WRONG_STUB_VERSION RPC_X_INVALID_PIPE_OBJECT RPC_X_WRONG_PIPE_ORDER

1832 1898 1899 1900

RPC_X_WRONG_PIPE_VERSION RPC_S_GROUP_MEMBER_NOT_FOUND EPT_S_CANT_CREATE RPC_S_INVALID_OBJECT

1901 1902 1903 1904 1905 1906 1907

ERROR_INVALID_TIME ERROR_INVALID_FORM_NAME ERROR_INVALID_FORM_SIZE ERROR_ALREADY_WAITING ERROR_PRINTER_DELETED ERROR_INVALID_PRINTER_STATE ERROR_PASSWORD_MUST_CHANGE

1908 1909

ERROR_DOMAIN_CONTROLLER_NOT_FOUND ERROR_ACCOUNT_LOCKED_OUT

currently locked out and may not be logged on to. 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 The object exporter specified was not found. The object specified was not found. The object resolver set specified was not found. Some data remains to be sent in the request buffer. Invalid asynchronous remote procedure call handle. Invalid asynchronous RPC call handle for this operation. The RPC pipe object has already been closed. The RPC call completed before all pipes were processed. No more data is available from the RPC pipe. No site name is available for this machine. The file can not be accessed by the system. The name of the file cannot be resolved by the system. The entry is not of the expected type. Not all object UUIDs could be exported to the specified entry. Interface could not be exported to the specified entry. The specified profile entry could not be added. The specified profile element could not be added. The specified profile element could not be removed. The group element could not be added. The group element could not be removed. The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers. The pixel format is invalid. The specified driver is invalid. OR_INVALID_OXID OR_INVALID_OID OR_INVALID_SET RPC_S_SEND_INCOMPLETE RPC_S_INVALID_ASYNC_HANDLE RPC_S_INVALID_ASYNC_CALL RPC_X_PIPE_CLOSED RPC_X_PIPE_DISCIPLINE_ERROR RPC_X_PIPE_EMPTY ERROR_NO_SITENAME ERROR_CANT_ACCESS_FILE ERROR_CANT_RESOLVE_FILENAME RPC_S_ENTRY_TYPE_MISMATCH RPC_S_NOT_ALL_OBJS_EXPORTED RPC_S_INTERFACE_NOT_EXPORTED RPC_S_PROFILE_NOT_ADDED RPC_S_PRF_ELT_NOT_ADDED RPC_S_PRF_ELT_NOT_REMOVED RPC_S_GRP_ELT_NOT_ADDED RPC_S_GRP_ELT_NOT_REMOVED ERROR_KM_DRIVER_BLOCKED

2000 2001

ERROR_INVALID_PIXEL_FORMAT ERROR_BAD_DRIVER

2002

The window style or class attribute is invalid for this operation. The requested metafile operation is not supported. The requested transformation operation is not supported. The requested clipping operation is not supported. The specified color management module is invalid. The specified color profile is invalid. The specified tag was not found. A required tag is not present. The specified tag is already present. The specified color profile is not associated with any device. The specified color profile was not found. The specified color space is invalid. Image Color Management is not enabled. There was an error while deleting the color transform. The specified color transform is invalid. The specified transform does not match the bitmap's color space. The specified named color index is not present in the profile. The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified. The specified username is invalid. This network connection does not exist. This network connection has files open or requests pending. Active connections still exist. The device is in use by an

ERROR_INVALID_WINDOW_STYLE

2003 2004 2005 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021

ERROR_METAFILE_NOT_SUPPORTED ERROR_TRANSFORM_NOT_SUPPORTED ERROR_CLIPPING_NOT_SUPPORTED ERROR_INVALID_CMM ERROR_INVALID_PROFILE ERROR_TAG_NOT_FOUND ERROR_TAG_NOT_PRESENT ERROR_DUPLICATE_TAG ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE ERROR_PROFILE_NOT_FOUND ERROR_INVALID_COLORSPACE ERROR_ICM_NOT_ENABLED ERROR_DELETING_ICM_XFORM ERROR_INVALID_TRANSFORM ERROR_COLORSPACE_MISMATCH

2022

ERROR_INVALID_COLORINDEX

2108

ERROR_CONNECTED_OTHER_PASSWORD

2202 2250 2401 2402 2404

ERROR_BAD_USERNAME ERROR_NOT_CONNECTED ERROR_OPEN_FILES ERROR_ACTIVE_CONNECTIONS ERROR_DEVICE_IN_USE

active process and cannot be disconnected. 3000 3001 3002 3003 3004 3005 3006 3007 The specified print monitor is unknown. The specified printer driver is currently in use. The spool file was not found. A StartDocPrinter call was not issued. An AddJob call was not issued. The specified print processor has already been installed. The specified print monitor has already been installed. The specified print monitor does not have the required functions. The specified print monitor is currently in use. The requested operation is not allowed when there are jobs queued to the printer. The requested operation is successful. Changes will not be effective until the system is rebooted. The requested operation is successful. Changes will not be effective until the service is restarted. No printers were found. WINS encountered an error while processing the command. The local WINS can not be deleted. The importation from the file failed. The backup failed. Was a full backup done before? The backup failed. Check the directory to which you are backing the database. The name does not exist in the WINS database. Replication with a nonconfigured partner is not allowed. The DHCP client has obtained an IP address that is already in ERROR_UNKNOWN_PRINT_MONITOR ERROR_PRINTER_DRIVER_IN_USE ERROR_SPOOL_FILE_NOT_FOUND ERROR_SPL_NO_STARTDOC ERROR_SPL_NO_ADDJOB ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED ERROR_PRINT_MONITOR_ALREADY_INSTALLED ERROR_INVALID_PRINT_MONITOR

3008 3009

ERROR_PRINT_MONITOR_IN_USE ERROR_PRINTER_HAS_JOBS_QUEUED

3010

ERROR_SUCCESS_REBOOT_REQUIRED

3011

ERROR_SUCCESS_RESTART_REQUIRED

3012 4000 4001 4002 4003 4004

ERROR_PRINTER_NOT_FOUND ERROR_WINS_INTERNAL ERROR_CAN_NOT_DEL_LOCAL_WINS ERROR_STATIC_INIT ERROR_INC_BACKUP ERROR_FULL_BACKUP

4005 4006

ERROR_REC_NON_EXISTENT ERROR_RPL_NOT_ALLOWED

4100

ERROR_DHCP_ADDRESS_CONFLICT

use on the network. The local interface will be disabled until the DHCP client can obtain a new address. 4200 The GUID passed was not recognized as valid by a WMI data provider. The instance name passed was not recognized as valid by a WMI data provider. The data item ID passed was not recognized as valid by a WMI data provider. The WMI request could not be completed and should be retried. The WMI data provider could not be located. The WMI data provider references an instance set that has not been registered. The WMI data block or event notification has already been enabled. The WMI data block is no longer available. The WMI data service is not available. The WMI data provider failed to carry out the request. The WMI MOF information is not valid. The WMI registration information is not valid. The WMI data block or event notification has already been disabled. The WMI data item or data block is read only. The WMI data item or data block could not be changed. The media identifier does not represent a valid medium. The library identifier does not represent a valid library. The media pool identifier does not represent a valid media pool. The drive and medium are not compatible or exist in different libraries. ERROR_WMI_GUID_NOT_FOUND

4201

ERROR_WMI_INSTANCE_NOT_FOUND

4202

ERROR_WMI_ITEMID_NOT_FOUND

4203

ERROR_WMI_TRY_AGAIN

4204 4205

ERROR_WMI_DP_NOT_FOUND ERROR_WMI_UNRESOLVED_INSTANCE_REF

4206

ERROR_WMI_ALREADY_ENABLED

4207 4208 4209 4210 4211 4212

ERROR_WMI_GUID_DISCONNECTED ERROR_WMI_SERVER_UNAVAILABLE ERROR_WMI_DP_FAILED ERROR_WMI_INVALID_MOF ERROR_WMI_INVALID_REGINFO ERROR_WMI_ALREADY_DISABLED

4213 4214 4300 4301 4302

ERROR_WMI_READ_ONLY ERROR_WMI_SET_FAILURE ERROR_INVALID_MEDIA ERROR_INVALID_LIBRARY ERROR_INVALID_MEDIA_POOL

4303

ERROR_DRIVE_MEDIA_MISMATCH

4304

The medium currently exists in an offline library and must be online to perform this operation. The operation cannot be performed on an offline library. The library, drive, or media pool is empty. The library, drive, or media pool must be empty to perform this operation. No media is currently available in this media pool or library. A resource required for this operation is disabled. The media identifier does not represent a valid cleaner. The drive cannot be cleaned or does not support cleaning. The object identifier does not represent a valid object. Unable to read from or write to the database. The database is full. The medium is not compatible with the device or media pool. The resource required for this operation does not exist. The operation identifier is not valid. The media is not mounted or ready for use. The device is not ready for use. The operator or administrator has refused the request. The drive identifier does not represent a valid drive. Library is full. No slot is available for use. The transport cannot access the medium. Unable to load the medium into the drive. Unable to retrieve status about the drive. Unable to retrieve status about the slot. Unable to retrieve status about

ERROR_MEDIA_OFFLINE

4305 4306 4307

ERROR_LIBRARY_OFFLINE ERROR_EMPTY ERROR_NOT_EMPTY

4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327

ERROR_MEDIA_UNAVAILABLE ERROR_RESOURCE_DISABLED ERROR_INVALID_CLEANER ERROR_UNABLE_TO_CLEAN ERROR_OBJECT_NOT_FOUND ERROR_DATABASE_FAILURE ERROR_DATABASE_FULL ERROR_MEDIA_INCOMPATIBLE ERROR_RESOURCE_NOT_PRESENT ERROR_INVALID_OPERATION ERROR_MEDIA_NOT_AVAILABLE ERROR_DEVICE_NOT_AVAILABLE ERROR_REQUEST_REFUSED ERROR_INVALID_DRIVE_OBJECT ERROR_LIBRARY_FULL ERROR_MEDIUM_NOT_ACCESSIBLE ERROR_UNABLE_TO_LOAD_MEDIUM ERROR_UNABLE_TO_INVENTORY_DRIVE ERROR_UNABLE_TO_INVENTORY_SLOT ERROR_UNABLE_TO_INVENTORY_TRANSPORT

the transport. 4328 4329 4330 4331 4332 4333 Cannot use the transport because it is already in use. Unable to open or close the inject/eject port. Unable to eject the media because it is in a drive. A cleaner slot is already reserved. A cleaner slot is not reserved. The cleaner cartridge has performed the maximum number of drive cleanings. Unexpected on -medium identifier. The last remaining item in this group or resource cannot be deleted. The message provided exceeds the maximum size allowed for this parameter. The volume contains system or paging files. The media type cannot be removed from this library since at least one drive in the library reports it can support this media type. This offline media cannot be mounted on this system since no enabled drives are present which can be used. The remote storage service was not able to recall the file. The remote storage service is not operational at this time. The remote storage service encountered a media error. The file or directory is not a reparse point. The reparse point attribute cannot be set because it conflicts with an existing attribute. The data present in the reparse point buffer is invalid. The tag present in the reparse point buffer is invalid. There is a mismatch between the tag specified in the request ERROR_TRANSPORT_FULL ERROR_CONTROLLING_IEPORT ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA ERROR_CLEANER_SLOT_SET ERROR_CLEANER_SLOT_NOT_SET ERROR_CLEANER_CARTRIDGE_SPENT

4334 4335

ERROR_UNEXPECTED_OMID ERROR_CANT_DELETE_LAST_ITEM

4336

ERROR_MESSAGE_EXCEEDS_MAX_SIZE

4337 4338

ERROR_VOLUME_CONTAINS_SYS_FILES ERROR_INDIGENOUS_TYPE

4339

ERROR_NO_SUPPORTING_DRIVES

4350 4351 4352 4390 4391

ERROR_FILE_OFFLINE ERROR_REMOTE_STORAGE_NOT_ACTIVE ERROR_REMOTE_STORAGE_MEDIA_ERROR ERROR_NOT_A_REPARSE_POINT ERROR_REPARSE_ATTRIBUTE_CONFLICT

4392 4393 4394

ERROR_INVALID_REPARSE_DATA ERROR_REPARSE_TAG_INVALID ERROR_REPARSE_TAG_MISMATCH

and the tag present in the reparse point. 4500 5001 Single Instance Storage is not available on this volume. The cluster resource cannot be moved to another group because other resources are dependent on it. The cluster resource dependency cannot be found. The cluster resource cannot be made dependent on the specified resource because it is already dependent. The cluster resource is not online. A cluster node is not available for this operation. The cluster resource is not available. The cluster resource could not be found. The cluster is being shut down. A cluster node cannot be evicted from the cluster unless the node is down. The object already exists. The object is already in the list. The cluster group is not available for any new requests. The cluster group could not be found. The operation could not be completed because the cluster group is not online. The cluster node is not the owner of the resource. The cluster node is not the owner of the group. The cluster resource could not be created in the specified resource monitor. The cluster resource could not be brought online by the resource monitor. The operation could not be completed because the cluster resource is online. The cluster resource could not ERROR_VOLUME_NOT_SIS_ENABLED ERROR_DEPENDENT_RESOURCE_EXISTS

5002 5003

ERROR_DEPENDENCY_NOT_FOUND ERROR_DEPENDENCY_ALREADY_EXISTS

5004 5005 5006 5007 5008 5009

ERROR_RESOURCE_NOT_ONLINE ERROR_HOST_NODE_NOT_AVAILABLE ERROR_RESOURCE_NOT_AVAILABLE ERROR_RESOURCE_NOT_FOUND ERROR_SHUTDOWN_CLUSTER ERROR_CANT_EVICT_ACTIVE_NODE

5010 5011 5012 5013 5014

ERROR_OBJECT_ALREADY_EXISTS ERROR_OBJECT_IN_LIST ERROR_GROUP_NOT_AVAILABLE ERROR_GROUP_NOT_FOUND ERROR_GROUP_NOT_ONLINE

5015 5016 5017

ERROR_HOST_NODE_NOT_RESOURCE_OWNER ERROR_HOST_NODE_NOT_GROUP_OWNER ERROR_RESMON_CREATE_FAILED

5018

ERROR_RESMON_ONLINE_FAILED

5019

ERROR_RESOURCE_ONLINE

5020

ERROR_QUORUM_RESOURCE

be deleted or brought offline because it is the quorum resource. 5021 The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource. The cluster software is shutting down. The group or resource is not in the correct state to perform the requested operation. The properties were stored but not all changes will take effect until the next time the resource is brought online. The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. The cluster resource could not be deleted since it is a core resource. The quorum resource failed to come online. The quorum log could not be created or mounted successfully. The cluster log is corrupt. The record could not be written to the cluster log since it exceeds the maximum size. The cluster log exceeds its maximum size. No checkpoint record was found in the cluster log. The minimum required disk space needed for logging is not available. The cluster node failed to take control of the quorum resource because the resource is owned by another active node. A cluster network is not available for this operation. A cluster node is not available for this operation. All cluster nodes must be running to perform this operation. ERROR_NOT_QUORUM_CAPABLE

5022 5023

ERROR_CLUSTER_SHUTTING_DOWN ERROR_INVALID_STATE

5024

ERROR_RESOURCE_PROPERTIES_STORED

5025

ERROR_NOT_QUORUM_CLASS

5026

ERROR_CORE_RESOURCE

5027 5028

ERROR_QUORUM_RESOURCE_ONLINE_FAILED ERROR_QUORUMLOG_OPEN_FAILED

5029 5030

ERROR_CLUSTERLOG_CORRUPT ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE

5031 5032 5033

ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE

5034

ERROR_QUORUM_OWNER_ALIVE

5035 5036 5037

ERROR_NETWORK_NOT_AVAILABLE ERROR_NODE_NOT_AVAILABLE ERROR_ALL_NODES_NOT_AVAILABLE

5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5056 5057 5058 5059 5060

A cluster resource failed. The cluster node is not valid. The cluster node already exists. A node is in the process of joining the cluster. The cluster node was not found. The cluster local node information was not found. The cluster network already exists. The cluster network was not found. The cluster network interface already exists. The cluster network interface was not found. The cluster request is not valid for this object. The cluster network provider is not valid. The cluster node is down. The cluster node is not reachable. The cluster node is not a member of the cluster. A cluster join operation is not in progress. The cluster network is not valid. The cluster node is up. The cluster IP address is already in use. The cluster node is not paused. No cluster security context is available. The cluster network is not configured for internal cluster communication. The cluster node is already up. The cluster node is already down. The cluster network is already online. The cluster network is already offline. The cluster node is already a

ERROR_RESOURCE_FAILED ERROR_CLUSTER_INVALID_NODE ERROR_CLUSTER_NODE_EXISTS ERROR_CLUSTER_JOIN_IN_PROGRESS ERROR_CLUSTER_NODE_NOT_FOUND ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND ERROR_CLUSTER_NETWORK_EXISTS ERROR_CLUSTER_NETWORK_NOT_FOUND ERROR_CLUSTER_NETINTERFACE_EXISTS ERROR_CLUSTER_NETINTERFACE_NOT_FOUND ERROR_CLUSTER_INVALID_REQUEST ERROR_CLUSTER_INVALID_NETWORK_PROVIDER ERROR_CLUSTER_NODE_DOWN ERROR_CLUSTER_NODE_UNREACHABLE ERROR_CLUSTER_NODE_NOT_MEMBER ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS ERROR_CLUSTER_INVALID_NETWORK ERROR_CLUSTER_NODE_UP ERROR_CLUSTER_IPADDR_IN_USE ERROR_CLUSTER_NODE_NOT_PAUSED ERROR_CLUSTER_NO_SECURITY_CONTEXT ERROR_CLUSTER_NETWORK_NOT_INTERNAL

5061 5062 5063 5064 5065

ERROR_CLUSTER_NODE_ALREADY_UP ERROR_CLUSTER_NODE_ALREADY_DOWN ERROR_CLUSTER_NETWORK_ALREADY_ONLINE ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE ERROR_CLUSTER_NODE_ALREADY_MEMBER

member of the cluster. 5066 The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network. One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network. This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list. The cluster quorum resource is not allowed to have any dependencies. The cluster node is paused. The cluster resource cannot be brought online. The owner node cannot run this resource. The cluster node is not ready to perform the requested operation. The cluster node is shutting down. The cluster join operation was aborted. The cluster join operation failed due to incompatible software versions between the joining node and its sponsor. This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor. The system configuration changed during the cluster join or form operation. The join or form operation was aborted. The specified resource type was not found. The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node. ERROR_CLUSTER_LAST_INTERNAL_NETWORK

5067

ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS

5068

ERROR_INVALID_OPERATION_ON_QUORUM

5069

ERROR_DEPENDENCY_NOT_ALLOWED

5070 5071

ERROR_CLUSTER_NODE_PAUSED ERROR_NODE_CANT_HOST_RESOURCE

5072

ERROR_CLUSTER_NODE_NOT_READY

5073 5074 5075

ERROR_CLUSTER_NODE_SHUTTING_DOWN ERROR_CLUSTER_JOIN_ABORTED ERROR_CLUSTER_INCOMPATIBLE_VERSIONS

5076

ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED

5077

ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED

5078 5079

ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED

5081

No authentication package could be registered with the RPC server. You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group. The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join. The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state. A non locker code got a request to reserve the lock for making global updates. The quorum disk could not be located by the cluster service. The backup up cluster database is possibly corrupt. A DFS root already exists in this cluster node. An attempt to modify a resource property failed because it conflicts with another existing property. The specified file could not be encrypted. The specified file could not be decrypted. The specified file is encrypted and the user does not have the ability to decrypt it. There is no valid encryption recovery policy configured for this system. The required encryption driver is not loaded for this system. The file was encrypted with a different encryption driver than is currently loaded. There are no EFS keys defined for the user.

ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED

5082

ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST

5083

ERROR_CLUSTER_DATABASE_SEQMISMATCH

5084

ERROR_RESMON_INVALID_STATE

5085

ERROR_CLUSTER_GUM_NOT_LOCKER

5086 5087 5088 5089

ERROR_QUORUM_DISK_NOT_FOUND ERROR_DATABASE_BACKUP_CORRUPT ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT ERROR_RESOURCE_PROPERTY_UNCHANGEABLE

6000 6001 6002

ERROR_ENCRYPTION_FAILED ERROR_DECRYPTION_FAILED ERROR_FILE_ENCRYPTED

6003

ERROR_NO_RECOVERY_POLICY

6004 6005

ERROR_NO_EFS ERROR_WRONG_EFS

6006

ERROR_NO_USER_KEYS

6007 6008 6009 6010 6011 6012

The specified file is not encrypted. The specified file is not in the defined EFS export format. The specified file is read only. The directory has been disabled for encryption. The server is not trusted for remote encryption operation. Recovery policy configured for this system contains invalid recovery certificate. The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file. The disk partition does not support file encryption. The list of servers for this workgroup is not currently available. The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts. The specified session name is invalid. The specified protocol driver is invalid. The specified protocol driver was not found in the system path. The specified terminal connection driver was not found in the system path. A registry key for event logging could not be created for this session. A service with the same name already exists on the system. A close operation is pending on the session. There are no free output buffers available. The MODEM.INF file was not found. The modem name was not found in MODEM.INF.

ERROR_FILE_NOT_ENCRYPTED ERROR_NOT_EXPORT_FORMAT ERROR_FILE_READ_ONLY ERROR_DIR_EFS_DISALLOWED ERROR_EFS_SERVER_NOT_TRUSTED ERROR_BAD_RECOVERY_POLICY

6013

ERROR_EFS_ALG_BLOB_TOO_BIG

6014 6118

ERROR_VOLUME_NOT_SUPPORT_EFS ERROR_NO_BROWSER_SERVERS_FOUND

6200

SCHED_E_SERVICE_NOT_LOCALSYSTEM

7001 7002 7003

ERROR_CTX_WINSTATION_NAME_INVALID ERROR_CTX_INVALID_PD ERROR_CTX_PD_NOT_FOUND

7004

ERROR_CTX_WD_NOT_FOUND

7005

ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY

7006 7007 7008 7009 7010

ERROR_CTX_SERVICE_NAME_COLLISION ERROR_CTX_CLOSE_PENDING ERROR_CTX_NO_OUTBUF ERROR_CTX_MODEM_INF_NOT_FOUND ERROR_CTX_INVALID_MODEMNAME

7011

The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem. The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on. Carrier detect has failed or carrier has been dropped due to disconnect. Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional. Busy signal detected at remote site on callback. Voice detected at remote site on callback. Transport driver error The specified session cannot be found. The specified session name is already in use. The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation. An attempt has been made to connect to a session whose video mode is not supported by the current client. The application attempted to enable DOS graphics mode. DOS graphics mode is not supported. Your interactive logon privilege has been disabled. Please contact your administrator. The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access. The client failed to respond to the server connect message. Disconnecting the console session is not supported. Reconnecting a disconnected session to the console is not supported.

ERROR_CTX_MODEM_RESPONSE_ERROR

7012

ERROR_CTX_MODEM_RESPONSE_TIMEOUT

7013

ERROR_CTX_MODEM_RESPONSE_NO_CARRIER

7014

ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE

7015 7016 7017 7022 7023 7024

ERROR_CTX_MODEM_RESPONSE_BUSY ERROR_CTX_MODEM_RESPONSE_VOICE ERROR_CTX_TD_ERROR ERROR_CTX_WINSTATION_NOT_FOUND ERROR_CTX_WINSTATION_ALREADY_EXISTS ERROR_CTX_WINSTATION_BUSY

7025

ERROR_CTX_BAD_VIDEO_MODE

7035

ERROR_CTX_GRAPHICS_INVALID

7037

ERROR_CTX_LOGON_DISABLED

7038

ERROR_CTX_NOT_CONSOLE

7040 7041 7042

ERROR_CTX_CLIENT_QUERY_TIMEOUT ERROR_CTX_CONSOLE_DISCONNECT ERROR_CTX_CONSOLE_CONNECT

7044 7045 7049 7050

The request to control another session remotely was denied. The requested session access is denied. The specified terminal connection driver is invalid. The requested session cannot be controlled remotely. This may be because the session is disconnected or does not currently have a user logged on. Also, you cannot control a session remotely from the system console and you cannot remote control your own current session. The requested session is not configured to allow remote control. Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. Please call your system administrator to obtain a new copy of the Terminal Server client with a valid, unique license number. Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. Please call your system administrator for help in entering a valid, unique license number for this Terminal Server client. The system has reached its licensed logon limit. Please try again later. The client you are using is not licensed to use this system. Your logon request is denied. The system license has expired. Your logon request is denied. Remote control could not be terminated because the specified session is not currently being remotely controlled. The file replication service API was called incorrectly. The file replication service

ERROR_CTX_SHADOW_DENIED ERROR_CTX_WINSTATION_ACCESS_DENIED ERROR_CTX_INVALID_WD ERROR_CTX_SHADOW_INVALID

7051

ERROR_CTX_SHADOW_DISABLED

7052

ERROR_CTX_CLIENT_LICENSE_IN_USE

7053

ERROR_CTX_CLIENT_LICENSE_NOT_SET

7054

ERROR_CTX_LICENSE_NOT_AVAILABLE

7055

ERROR_CTX_LICENSE_CLIENT_INVALID

7056 7057

ERROR_CTX_LICENSE_EXPIRED ERROR_CTX_SHADOW_NOT_RUNNING

8001 8002

FRS_ERR_INVALID_API_SEQUENCE FRS_ERR_STARTING_SERVICE

cannot be started. 8003 8004 The file replication service cannot be stopped. The file replication service API terminated the request. The event log may have more information. The file replication service terminated the request. The event log may have more information. The file replication service cannot be contacted. The event log may have more information. The file replication service cannot satisfy the request because the user has insufficient privileges. The event log may have more information. The file replication service cannot satisfy the request because authenticated RPC is not available. The event log may have more information. The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log may have more information. The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log may have more information. The file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information. The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information. The file replication service cannot populate the system volume because of an internal error. The event log may have more information. FRS_ERR_STOPPING_SERVICE FRS_ERR_INTERNAL_API

8005

FRS_ERR_INTERNAL

8006

FRS_ERR_SERVICE_COMM

8007

FRS_ERR_INSUFFICIENT_PRIV

8008

FRS_ERR_AUTHENTICATION

8009

FRS_ERR_PARENT_INSUFFICIENT_PRIV

8010

FRS_ERR_PARENT_AUTHENTICATION

8011

FRS_ERR_CHILD_TO_PARENT_COMM

8012

FRS_ERR_PARENT_TO_CHILD_COMM

8013

FRS_ERR_SYSVOL_POPULATE

8014

The file replication service cannot populate the system volume because of an internal timeout. The event log may have more information. The file replication service cannot process the request. The system volume is busy with a previous request. The file replication service cannot stop replicating the system volume because of an internal error. The event log may have more information. The file replication service detected an invalid parameter. An error occurred while installing the directory service. For more information, see the event log. The directory service evaluated group memberships locally. The specified directory service attribute or value does not exist. The attribute syntax specified to the directory service is invalid. The attribute type specified to the directory service is not defined. The specified directory service attribute or value already exists. The directory service is busy. The directory service is unavailable. The directory service was unable to allocate a relative identifier. The directory service has exhausted the pool of relative identifiers. The requested operation could not be performed because the directory service is not the master for that type of operation. The directory service was unable to initialize the subsystem that allocates relative identifiers. The requested operation did not

FRS_ERR_SYSVOL_POPULATE_TIMEOUT

8015

FRS_ERR_SYSVOL_IS_BUSY

8016

FRS_ERR_SYSVOL_DEMOTE

8017 8200

FRS_ERR_INVALID_SERVICE_PARAMETER ERROR_DS_NOT_INSTALLED

8201 8202

ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY ERROR_DS_NO_ATTRIBUTE_OR_VALUE

8203

ERROR_DS_INVALID_ATTRIBUTE_SYNTAX

8204

ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED

8205

ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS

8206 8207 8208

ERROR_DS_BUSY ERROR_DS_UNAVAILABLE ERROR_DS_NO_RIDS_ALLOCATED

8209

ERROR_DS_NO_MORE_RIDS

8210

ERROR_DS_INCORRECT_ROLE_OWNER

8211

ERROR_DS_RIDMGR_INIT_ERROR

8212

ERROR_DS_OBJ_CLASS_VIOLATION

satisfy one or more constraints associated with the class of the object. 8213 The directory service can perform the requested operation only on a leaf object. The directory service cannot perform the requested operation on the RDN attribute of an object. The directory service detected an attempt to modify the object class of an object. The requested cross-domain move operation could not be performed. Unable to contact the global catalog server. The policy object is shared and can only be modified at the root. The policy object does not exist. The requested policy information is only in the directory service. A domain controller promotion is currently active. A domain controller promotion is not currently active An operations error occurred. A protocol error occurred. The time limit for this request was exceeded. The size limit for this request was exceeded. The administrative limit for this request was exceeded. The compare response was false. The compare response was true. The requested authentication method is not supported by the server. A more secure authentication method is required for this server. Inappropriate authentication. ERROR_DS_CANT_ON_NON_LEAF

8214

ERROR_DS_CANT_ON_RDN

8215

ERROR_DS_CANT_MOD_OBJ_CLASS

8216

ERROR_DS_CROSS_DOM_MOVE_ERROR

8217 8218

ERROR_DS_GC_NOT_AVAILABLE ERROR_SHARED_POLICY

8219 8220

ERROR_POLICY_OBJECT_NOT_FOUND ERROR_POLICY_ONLY_IN_DS

8221 8222 8224 8225 8226 8227 8228 8229 8230 8231

ERROR_PROMOTION_ACTIVE ERROR_NO_PROMOTION_ACTIVE ERROR_DS_OPERATIONS_ERROR ERROR_DS_PROTOCOL_ERROR ERROR_DS_TIMELIMIT_EXCEEDED ERROR_DS_SIZELIMIT_EXCEEDED ERROR_DS_ADMIN_LIMIT_EXCEEDED ERROR_DS_COMPARE_FALSE ERROR_DS_COMPARE_TRUE ERROR_DS_AUTH_METHOD_NOT_SUPPORTED

8232

ERROR_DS_STRONG_AUTH_REQUIRED

8233

ERROR_DS_INAPPROPRIATE_AUTH

8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261

The authentication mechanism is unknown. A referral was returned from the server. The server does not support the requested critical extension. This request requires a secure connection. Inappropriate matching. A constraint violation occurred. There is no such object on the server. There is an alias problem. An invalid dn syntax has been specified. The object is a leaf object. There is an alias dereferencing problem. The server is unwilling to process the request. A loop has been detected. There is a naming violation. The result set is too large. The operation affects multiple DSAs The server is not operational. A local error has occurred. An encoding error has occurred. A decoding error has occurred. The search filter cannot be recognized. One or more parameters are illegal. The specified method is not supported. No results were returned. The specified control is not supported by the server. A referral loop was detected by the client. The preset referral limit was exceeded. The search requires a SORT control.

ERROR_DS_AUTH_UNKNOWN ERROR_DS_REFERRAL ERROR_DS_UNAVAILABLE_CRIT_EXTENSION ERROR_DS_CONFIDENTIALITY_REQUIRED ERROR_DS_INAPPROPRIATE_MATCHING ERROR_DS_CONSTRAINT_VIOLATION ERROR_DS_NO_SUCH_OBJECT ERROR_DS_ALIAS_PROBLEM ERROR_DS_INVALID_DN_SYNTAX ERROR_DS_IS_LEAF ERROR_DS_ALIAS_DEREF_PROBLEM ERROR_DS_UNWILLING_TO_PERFORM ERROR_DS_LOOP_DETECT ERROR_DS_NAMING_VIOLATION ERROR_DS_OBJECT_RESULTS_TOO_LARGE ERROR_DS_AFFECTS_MULTIPLE_DSAS ERROR_DS_SERVER_DOWN ERROR_DS_LOCAL_ERROR ERROR_DS_ENCODING_ERROR ERROR_DS_DECODING_ERROR ERROR_DS_FILTER_UNKNOWN ERROR_DS_PARAM_ERROR ERROR_DS_NOT_SUPPORTED ERROR_DS_NO_RESULTS_RETURNED ERROR_DS_CONTROL_NOT_FOUND ERROR_DS_CLIENT_LOOP ERROR_DS_REFERRAL_LIMIT_EXCEEDED ERROR_DS_SORT_CONTROL_MISSING

8262 8301

The search results exceed the offset range specified. The root object must be the head of a naming context. The root object cannot have an instantiated parent. The add replica operation cannot be performed. The naming context must be writable in order to create the replica. A reference to an attribute that is not defined in the schema occurred. The maximum size of an object has been exceeded. An attempt was made to add an object to the directory with a name that is already in use. An attempt was made to add an object of a class that does not have an RDN defined in the schema. An attempt was made to add an object using an RDN that is not the RDN defined in the schema. None of the requested attributes were found on the objects. The user buffer is too small. The attribute specified in the operation is not present on the object. Illegal modify operation. Some aspect of the modification is not permitted. The specified object is too large. The specified instance type is not valid. The operation must be performed at a master DSA. The object class attribute must be specified. A required attribute is missing. An attempt was made to modify an object to include an attribute that is not legal for its class The specified attribute is already present on the object.

ERROR_DS_OFFSET_RANGE_ERROR ERROR_DS_ROOT_MUST_BE_NC

8302

ERROR_DS_ADD_REPLICA_INHIBITED

8303

ERROR_DS_ATT_NOT_DEF_IN_SCHEMA

8304 8305

ERROR_DS_MAX_OBJ_SIZE_EXCEEDED ERROR_DS_OBJ_STRING_NAME_EXISTS

8306

ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA

8307

ERROR_DS_RDN_DOESNT_MATCH_SCHEMA

8308

ERROR_DS_NO_REQUESTED_ATTS_FOUND

8309 8310

ERROR_DS_USER_BUFFER_TO_SMALL ERROR_DS_ATT_IS_NOT_ON_OBJ

8311

ERROR_DS_ILLEGAL_MOD_OPERATION

8312 8313 8314 8315 8316 8317

ERROR_DS_OBJ_TOO_LARGE ERROR_DS_BAD_INSTANCE_TYPE ERROR_DS_MASTERDSA_REQUIRED ERROR_DS_OBJECT_CLASS_REQUIRED ERROR_DS_MISSING_REQUIRED_ATT ERROR_DS_ATT_NOT_DEF_FOR_CLASS

8318

ERROR_DS_ATT_ALREADY_EXISTS

8320 8321

The specified attribute is not present, or has no values. Multiple values were specified for an attribute that can have only one value. A value for the attribute was not in the acceptable range of values. The specified value already exists. The attribute cannot be removed because it is not present on the object. The attribute value cannot be removed because it is not present on the object. The specified root object cannot be a subref. Chaining is not permitted. Chained evaluation is not permitted. The operation could not be performed because the object's parent is either uninstantiated or deleted. Having a parent that is an alias is not permitted. Aliases are leaf objects. The object and parent must be of the same type, either both masters or both replicas. The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object. Directory object not found. The aliased object is missing. The object name has bad syntax. It is not permitted for an alias to refer to another alias. The alias cannot be dereferenced. The operation is out of scope. The DSA object cannot be deleted. A directory service error has occurred.

ERROR_DS_CANT_ADD_ATT_VALUES ERROR_DS_SINGLE_VALUE_CONSTRAINT

8322

ERROR_DS_RANGE_CONSTRAINT

8323 8324

ERROR_DS_ATT_VAL_ALREADY_EXISTS ERROR_DS_CANT_REM_MISSING_ATT

8325

ERROR_DS_CANT_REM_MISSING_ATT_VAL

8326 8327 8328 8329

ERROR_DS_ROOT_CANT_BE_SUBREF ERROR_DS_NO_CHAINING ERROR_DS_NO_CHAINED_EVAL ERROR_DS_NO_PARENT_OBJECT

8330

ERROR_DS_PARENT_IS_AN_ALIAS

8331

ERROR_DS_CANT_MIX_MASTER_AND_REPS

8332

ERROR_DS_CHILDREN_EXIST

8333 8334 8335 8336 8337 8338 8340 8341

ERROR_DS_OBJ_NOT_FOUND ERROR_DS_ALIASED_OBJ_MISSING ERROR_DS_BAD_NAME_SYNTAX ERROR_DS_ALIAS_POINTS_TO_ALIAS ERROR_DS_CANT_DEREF_ALIAS ERROR_DS_OUT_OF_SCOPE ERROR_DS_CANT_DELETE_DSA_OBJ ERROR_DS_GENERIC_ERROR

8342

The operation can only be performed on an internal master DSA object. The object must be of class DSA. Insufficient access rights to perform the operation. The object cannot be added because the parent is not on the list of possible superiors. Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM). The name has too many parts. The name is too long. The name value is too long. The directory service encountered an error parsing a name. The directory service cannot get the attribute type for a name. The name does not identify an object; the name identifies a phantom. The security descriptor is too short. The security descriptor is invalid. Failed to create name for deleted object. The parent of a new subref must exist. The object must be a naming context. It is not permitted to add an attribute which is owned by the system. The class of the object must be structural; you cannot instantiate an abstract class. The schema object could not be found. A local object with this GUID (dead or alive) already exists. The operation cannot be performed on a back link. The cross reference for the

ERROR_DS_DSA_MUST_BE_INT_MASTER

8343 8344 8345

ERROR_DS_CLASS_NOT_DSA ERROR_DS_INSUFF_ACCESS_RIGHTS ERROR_DS_ILLEGAL_SUPERIOR

8346

ERROR_DS_ATTRIBUTE_OWNED_BY_SAM

8347 8348 8349 8350

ERROR_DS_NAME_TOO_MANY_PARTS ERROR_DS_NAME_TOO_LONG ERROR_DS_NAME_VALUE_TOO_LONG ERROR_DS_NAME_UNPARSEABLE

8351

ERROR_DS_NAME_TYPE_UNKNOWN

8352

ERROR_DS_NOT_AN_OBJECT

8353 8354 8355 8356 8357 8358

ERROR_DS_SEC_DESC_TOO_SHORT ERROR_DS_SEC_DESC_INVALID ERROR_DS_NO_DELETED_NAME ERROR_DS_SUBREF_MUST_HAVE_PARENT ERROR_DS_NCNAME_MUST_BE_NC ERROR_DS_CANT_ADD_SYSTEM_ONLY

8359

ERROR_DS_CLASS_MUST_BE_CONCRETE

8360 8361 8362 8363

ERROR_DS_INVALID_DMD ERROR_DS_OBJ_GUID_EXISTS ERROR_DS_NOT_ON_BACKLINK ERROR_DS_NO_CROSSREF_FOR_NC

specified naming context could not be found. 8364 The operation could not be performed because the directory service is shutting down. The directory service request is invalid. The role owner attribute could not be read. The requested FSMO operation failed. The current FSMO holder could not be reached. Modification of a DN across a naming context is not permitted. The attribute cannot be modified because it is owned by the system. Only the replicator can perform this function. The specified class is not defined. The specified class is not a subclass. The name reference is invalid. A cross reference already exists. It is not permitted to delete a master cross reference. Subtree notifications are only supported on NC heads. Notification filter is too complex. Schema update failed: duplicate RDN. Schema update failed: duplicate OID Schema update failed: duplicate MAPI identifier. Schema update failed: duplicate schema-id GUID. Schema update failed: duplicate LDAP display name. Schema update failed: rangelower less than range upper Schema update failed: syntax mismatch Schema deletion failed: ERROR_DS_SHUTTING_DOWN

8365 8366 8367

ERROR_DS_UNKNOWN_OPERATION ERROR_DS_INVALID_ROLE_OWNER ERROR_DS_COULDNT_CONTACT_FSMO

8368

ERROR_DS_CROSS_NC_DN_RENAME

8369

ERROR_DS_CANT_MOD_SYSTEM_ONLY

8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385

ERROR_DS_REPLICATOR_ONLY ERROR_DS_OBJ_CLASS_NOT_DEFINED ERROR_DS_OBJ_CLASS_NOT_SUBCLASS ERROR_DS_NAME_REFERENCE_INVALID ERROR_DS_CROSS_REF_EXISTS ERROR_DS_CANT_DEL_MASTER_CROSSREF ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX ERROR_DS_DUP_RDN ERROR_DS_DUP_OID ERROR_DS_DUP_MAPI_ID ERROR_DS_DUP_SCHEMA_ID_GUID ERROR_DS_DUP_LDAP_DISPLAY_NAME ERROR_DS_SEMANTIC_ATT_TEST ERROR_DS_SYNTAX_MISMATCH ERROR_DS_EXISTS_IN_MUST_HAVE

attribute is used in mustcontain 8386 8387 8388 8389 Schema deletion failed: attribute is used in may-contain Schema update failed: attribute in may-contain does not exist Schema update failed: attribute in must-contain does not exist Schema update failed: class in aux-class list does not exist or is not an auxiliary class Schema update failed: class in poss-superiors does not exist Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules Schema update failed: Rdn-AttId has wrong syntax Schema deletion failed: class is used as auxiliary class Schema deletion failed: class is used as sub class Schema deletion failed: class is used as poss superior Schema update failed in recalculating validation cache. The tree deletion is not finished. The requested delete operation could not be performed. Cannot read the governs class identifier for the schema record. The attribute schema has bad syntax. The attribute could not be cached. The class could not be cached. The attribute could not be removed from the cache. The class could not be removed from the cache. The distinguished name attribute could not be read. A required subref is missing. The instance type attribute could not be retrieved. An internal error has occurred. ERROR_DS_EXISTS_IN_MAY_HAVE ERROR_DS_NONEXISTENT_MAY_HAVE ERROR_DS_NONEXISTENT_MUST_HAVE ERROR_DS_AUX_CLS_TEST_FAIL

8390 8391

ERROR_DS_NONEXISTENT_POSS_SUP ERROR_DS_SUB_CLS_TEST_FAIL

8392 8393 8394 8395 8396 8397 8398 8399

ERROR_DS_BAD_RDN_ATT_ID_SYNTAX ERROR_DS_EXISTS_IN_AUX_CLS ERROR_DS_EXISTS_IN_SUB_CLS ERROR_DS_EXISTS_IN_POSS_SUP ERROR_DS_RECALCSCHEMA_FAILED ERROR_DS_TREE_DELETE_NOT_FINISHED ERROR_DS_CANT_DELETE ERROR_DS_ATT_SCHEMA_REQ_ID

8400 8401 8402 8403 8404 8405 8406 8407 8408

ERROR_DS_BAD_ATT_SCHEMA_SYNTAX ERROR_DS_CANT_CACHE_ATT ERROR_DS_CANT_CACHE_CLASS ERROR_DS_CANT_REMOVE_ATT_CACHE ERROR_DS_CANT_REMOVE_CLASS_CACHE ERROR_DS_CANT_RETRIEVE_DN ERROR_DS_MISSING_SUPREF ERROR_DS_CANT_RETRIEVE_INSTANCE ERROR_DS_CODE_INCONSISTENCY

8409 8410 8411 8412 8413 8414 8415

A database error has occurred. The attribute GOVERNSID is missing. An expected attribute is missing. The specified naming context is missing a cross reference. A security checking error has occurred. The schema is not loaded. Schema allocation failed. Please check if the machine is running low on memory. Failed to obtain the required syntax for the attribute schema. The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available. The replication operation failed because of a schema mismatch between the servers involved. The DSA object could not be found. The naming context could not be found. The naming context could not be found in the cache. The child object could not be retrieved. The modification was not permitted for security reasons. The operation cannot replace the hidden record. The hierarchy file is invalid. The attempt to build the hierarchy table failed. The directory configuration parameter is missing from the registry. The attempt to count the address book indices failed. The allocation of the hierarchy table failed. The directory service encountered an internal failure.

ERROR_DS_DATABASE_ERROR ERROR_DS_GOVERNSID_MISSING ERROR_DS_MISSING_EXPECTED_ATT ERROR_DS_NCNAME_MISSING_CR_REF ERROR_DS_SECURITY_CHECKING_ERROR ERROR_DS_SCHEMA_NOT_LOADED ERROR_DS_SCHEMA_ALLOC_FAILED

8416

ERROR_DS_ATT_SCHEMA_REQ_SYNTAX

8417

ERROR_DS_GCVERIFY_ERROR

8418

ERROR_DS_DRA_SCHEMA_MISMATCH

8419 8420 8421 8422 8423 8424 8425 8426 8427

ERROR_DS_CANT_FIND_DSA_OBJ ERROR_DS_CANT_FIND_EXPECTED_NC ERROR_DS_CANT_FIND_NC_IN_CACHE ERROR_DS_CANT_RETRIEVE_CHILD ERROR_DS_SECURITY_ILLEGAL_MODIFY ERROR_DS_CANT_REPLACE_HIDDEN_REC ERROR_DS_BAD_HIERARCHY_FILE ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED ERROR_DS_CONFIG_PARAM_MISSING

8428 8429 8430

ERROR_DS_COUNTING_AB_INDICES_FAILED ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED ERROR_DS_INTERNAL_FAILURE

8431

The directory service encountered an unknown failure. A root object requires a class of 'top'. This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles. The directory service was unable to transfer ownership of one or more floating singlemaster operation roles to other servers. The replication operation failed. An invalid parameter was specified for this replication operation. The directory service is too busy to complete the replication operation at this time. The distinguished name specified for this replication operation is invalid. The naming context specified for this replication operation is invalid. The distinguished name specified for this replication operation already exists. The replication system encountered an internal error. The replication operation encountered a database inconsistency. The server specified for this replication operation could not be contacted. The replication operation encountered an object with an invalid instance type. The replication operation failed to allocate memory. The replication operation encountered an error with the mail system.

ERROR_DS_UNKNOWN_ERROR

8432 8433

ERROR_DS_ROOT_REQUIRES_CLASS_TOP ERROR_DS_REFUSING_FSMO_ROLES

8434

ERROR_DS_MISSING_FSMO_SETTINGS

8435

ERROR_DS_UNABLE_TO_SURRENDER_ROLES

8436 8437

ERROR_DS_DRA_GENERIC ERROR_DS_DRA_INVALID_PARAMETER

8438

ERROR_DS_DRA_BUSY

8439

ERROR_DS_DRA_BAD_DN

8440

ERROR_DS_DRA_BAD_NC

8441

ERROR_DS_DRA_DN_EXISTS

8442 8443

ERROR_DS_DRA_INTERNAL_ERROR ERROR_DS_DRA_INCONSISTENT_DIT

8444

ERROR_DS_DRA_CONNECTION_FAILED

8445

ERROR_DS_DRA_BAD_INSTANCE_TYPE

8446 8447

ERROR_DS_DRA_OUT_OF_MEM ERROR_DS_DRA_MAIL_PROBLEM

8448

The replication reference information for the target server already exists. The replication reference information for the target server does not exist. The naming context cannot be removed because it is replicated to another server. The replication operation encountered a database error. The naming context is in the process of being removed or is not replicated from the specified server. Replication access was denied. The requested operation is not supported by this version of the directory service. The replication remote procedure call was cancelled. The source server is currently rejecting replication requests. The destination server is currently rejecting replication requests. The replication operation failed due to a collision of object names. The replication source has been reinstalled. The replication operation failed because a required parent object is missing. The replication operation was preempted. The replication synchronization attempt was abandoned because of a lack of updates. The replication operation was terminated because the system is shutting down. The replication synchronization attempt failed as the destination partial attribute set is not a subset of source partial attribute set. The replication synchronization attempt failed because a master replica attempted to sync from a partial replica. The server specified for this

ERROR_DS_DRA_REF_ALREADY_EXISTS

8449

ERROR_DS_DRA_REF_NOT_FOUND

8450

ERROR_DS_DRA_OBJ_IS_REP_SOURCE

8451 8452

ERROR_DS_DRA_DB_ERROR ERROR_DS_DRA_NO_REPLICA

8453 8454

ERROR_DS_DRA_ACCESS_DENIED ERROR_DS_DRA_NOT_SUPPORTED

8455 8456 8457

ERROR_DS_DRA_RPC_CANCELLED ERROR_DS_DRA_SOURCE_DISABLED ERROR_DS_DRA_SINK_DISABLED

8458

ERROR_DS_DRA_NAME_COLLISION

8459 8460

ERROR_DS_DRA_SOURCE_REINSTALLED ERROR_DS_DRA_MISSING_PARENT

8461 8462

ERROR_DS_DRA_PREEMPTED ERROR_DS_DRA_ABANDON_SYNC

8463

ERROR_DS_DRA_SHUTDOWN

8464

ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET

8465

ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA

8466

ERROR_DS_DRA_EXTN_CONNECTION_FAILED

replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation. 8467 A schema mismatch is detected between the source and the build used during a replica install. The replica cannot be installed. Schema update failed: An attribute with the same link identifier already exists. Name translation: Generic processing error. Name translation: Could not find the name or insufficient right to see name. Name translation: Input name mapped to more than one output name. Name translation: Input name found, but not the associated output format. Name translation: Unable to resolve completely, only the domain was found. Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire. Modification of a constructed att is not allowed. The OM-Object-Class specified is incorrect for an attribute with the specified syntax. The replication request has been posted; waiting for reply. The requested operation requires a directory service, and none was available. The LDAP display name of the class or attribute contains non ASCII characters. The requested search operation is only supported for base searches. The search failed to retrieve attributes from the database. The schema update operation tried to add a backward link attribute that has no corresponding forward link. ERROR_DS_INSTALL_SCHEMA_MISMATCH

8468

ERROR_DS_DUP_LINK_ID

8469 8470

ERROR_DS_NAME_ERROR_RESOLVING ERROR_DS_NAME_ERROR_NOT_FOUND

8471

ERROR_DS_NAME_ERROR_NOT_UNIQUE

8472

ERROR_DS_NAME_ERROR_NO_MAPPING

8473

ERROR_DS_NAME_ERROR_DOMAIN_ONLY

8474

ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING

8475 8476

ERROR_DS_CONSTRUCTED_ATT_MOD ERROR_DS_WRONG_OM_OBJ_CLASS

8477 8478

ERROR_DS_DRA_REPL_PENDING ERROR_DS_DS_REQUIRED

8479

ERROR_DS_INVALID_LDAP_DISPLAY_NAME

8480

ERROR_DS_NON_BASE_SEARCH

8481 8482

ERROR_DS_CANT_RETRIEVE_ATTS ERROR_DS_BACKLINK_WITHOUT_LINK

8483

Source and destination of a cross domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object. Source and destination of a cross domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object. Source and destination of a cross domain move operation are identical. Caller should use local move operation instead of cross domain move operation. Source and destination for a cross domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container. Destination of a cross domain move is not authoritative for the destination naming context. Source and destination of a cross domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object. Object being moved across domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object. Another operation which requires exclusive access to the PDC PSMO is already in progress. A cross domain move operation failed such that the two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state. This object may not be moved across domain boundaries either because cross domain moves for this class are disallowed, or the object has some special characteristics,

ERROR_DS_EPOCH_MISMATCH

8484

ERROR_DS_SRC_NAME_MISMATCH

8485

ERROR_DS_SRC_AND_DST_NC_IDENTICAL

8486

ERROR_DS_DST_NC_MISMATCH

8487

ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC

8488

ERROR_DS_SRC_GUID_MISMATCH

8489

ERROR_DS_CANT_MOVE_DELETED_OBJECT

8490

ERROR_DS_PDC_OPERATION_IN_PROGRESS

8491

ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD

8492

ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION

eg: trust account or restricted RID, which prevent its move. 8493 Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry. A naming context head must be the immediate child of another naming context head, not of an interior node. The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. Destination domain must be in native mode. The operation can not be performed because the server does not have an infrastructure container in the domain of interest. Cross-domain move of non empty account groups is not allowed. Cross-domain move of non empty resource groups is not allowed. The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings. Tree deletions starting at an object which has an NC head as a descendant are not allowed. The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use. The directory service failed to identify the list of objects to delete while attempting a tree deletion. Security Accounts Manager initialization failed because of ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS

8494

ERROR_DS_NC_MUST_HAVE_NC_PARENT

8495

ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE

8496 8497

ERROR_DS_DST_DOMAIN_NOT_NATIVE ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER

8498

ERROR_DS_CANT_MOVE_ACCOUNT_GROUP

8499

ERROR_DS_CANT_MOVE_RESOURCE_GROUP

8500

ERROR_DS_INVALID_SEARCH_FLAG

8501

ERROR_DS_NO_TREE_DELETE_ABOVE_NC

8502

ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE

8503

ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE

8504

ERROR_DS_SAM_INIT_FAILURE

the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information. 8505 Only an administrator can modify the membership list of an administrative group. Cannot change the primary group ID of a domain controller account. An attempt is made to modify the base schema. Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed. Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner. An object of this class cannot be created under the schema container. You can only create attribute-schema and classschema objects under the schema container. The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it. The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory. The specified group type is invalid. Cannot nest global groups in a mixed domain if the group is security-enabled. Cannot nest local groups in a mixed domain if the group is security-enabled. ERROR_DS_SENSITIVE_GROUP_VIOLATION

8506

ERROR_DS_CANT_MOD_PRIMARYGROUPID

8507 8508

ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD ERROR_DS_NONSAFE_SCHEMA_CHANGE

8509

ERROR_DS_SCHEMA_UPDATE_DISALLOWED

8510

ERROR_DS_CANT_CREATE_UNDER_SCHEMA

8511

ERROR_DS_INSTALL_NO_SRC_SCH_VERSION

8512

ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE

8513 8514

ERROR_DS_INVALID_GROUP_TYPE ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN

8515

ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN

8516 8517 8518 8519 8520

A global group cannot have a local group as a member. A global group cannot have a universal group as a member. A universal group cannot have a local group as a member. A global group cannot have a cross-domain member. A local group cannot have another cross-domain local group as a member. A group with primary members cannot change to a securitydisabled group. The schema cache load failed to convert the string default SD on a class-schema object. Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. The DSA operation is unable to proceed because of a DNS lookup failure. While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync. The Security Descriptor attribute could not be read. The object requested was not found, but an object with that key was found. The syntax of the linked attributed being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1. Security Account Manager needs to get the boot password. Security Account Manager needs to get the boot key from floppy disk. Directory Service cannot start. Directory Services could not start. The connection between client and server requires packet

ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER

8521

ERROR_DS_HAVE_PRIMARY_MEMBERS

8522

ERROR_DS_STRING_SD_CONVERSION_FAILED

8523

ERROR_DS_NAMING_MASTER_GC

8524

ERROR_DS_LOOKUP_FAILURE

8525

ERROR_DS_COULDNT_UPDATE_SPNS

8526 8527

ERROR_DS_CANT_RETRIEVE_SD ERROR_DS_KEY_NOT_UNIQUE.

8528

ERROR_DS_WRONG_LINKED_ATT_SYNTAX

8529

ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD

8530

ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY

8531 8532 8533

ERROR_DS_CANT_START ERROR_DS_INIT_FAILURE ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION

privacy or better. 8534 The source domain may not be in the same forest as destination. The destination domain must be in the forest. The operation requires that destination domain auditing be enabled. The operation couldn't locate a DC for the source domain. The source object must be a group or user. The source object's SID already exists in destination forest. The source and destination object must be of the same type. Security Accounts Manager initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information. 8542 Schema information could not be included in the replication request. The replication operation could not be completed due to a schema incompatibility. The replication operation could not be completed due to a previous schema incompatibility. The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation. The requested domain could not be deleted because there exist domain controllers that still host this domain. The requested operation can be performed only on a global catalog server. A local group can only be a member of other local groups in the same domain. Foreign security principals ERROR_DS_DRA_SCHEMA_INFO_SHIP ERROR_DS_SOURCE_DOMAIN_IN_FOREST

8535 8536

ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED

8537 8538 8539 8540

ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER ERROR_DS_SRC_SID_EXISTS_IN_FOREST ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH

8541

ERROR_SAM_INIT_FAILURE

8543

ERROR_DS_DRA_SCHEMA_CONFLICT

8544

ERROR_DS_DRA_EARLIER_SCHEMA_CONLICT

8545

ERROR_DS_DRA_OBJ_NC_MISMATCH

8546

ERROR_DS_NC_STILL_HAS_DSAS

8547

ERROR_DS_GC_REQUIRED

8548

ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY

8549

ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS

cannot be members of universal groups. 8550 The attribute is not allowed to be replicated to the GC because of security reasons. The checkpoint with the PDC could not be taken because there are too many modifications being processed currently. The operation requires that source domain auditing be enabled. Security principal objects can only be created inside domain naming contexts. A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format. A Filter was passed that uses constructed attributes. The unicodePwd attribute value must be enclosed in double quotes. Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased. For security reasons, the operation must be run on the destination DC. For security reasons, the source DC must be NT4SP4 or greater. Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed. Directory Services could not start because of the following error: %1. Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further. 8562 Security Accounts Manager initialization failed because of the following error: %1. ERROR_DS_SAM_INIT_FAILURE_CONSOLE ERROR_DS_CANT_ADD_TO_GC

8551

ERROR_DS_NO_CHECKPOINT_WITH_PDC

8552

ERROR_DS_SOURCE_AUDITING_NOT_ENABLED

8553

ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC

8554

ERROR_DS_INVALID_NAME_FOR_SPN

8555 8556

ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS ERROR_DS_UNICODEPWD_NOT_IN_QUOTES

8557

ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED

8558

ERROR_DS_MUST_BE_RUN_ON_DST_DC

8559 8560

ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ

8561

ERROR_DS_INIT_FAILURE_CONSOLE

Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further. 8563 This version of Windows is too old to support the current directory forest behavior. You must upgrade the operating system on this server before it can become a domain controller in this forest. This version of Windows is too old to support the current domain behavior. You must upgrade the operating system on this server before it can become a domain controller in this domain. This version of Windows no longer supports the behavior version in use in this directory forest. You must advance the forest behavior version before this server can become a domain controller in the forest. This version of Windows no longer supports the behavior version in use in this domain. You must advance the domain behavior version before this server can become a domain controller in the domain. The version of Windows is incompatible with the behavior version of the domain or forest. The behavior version cannot be increased to the requested value because Domain Controllers still exist with versions lower than the requested value. The behavior version value cannot be increased while the domain is still in mixed domain mode. You must first change the domain to native mode before increasing the behavior version. The sort order requested is not supported. Found an object with a non unique name. The machine account was created pre-NT4. The account needs to be recreated. ERROR_DS_FOREST_VERSION_TOO_HIGH

8564

ERROR_DS_DOMAIN_VERSION_TOO_HIGH

8565

ERROR_DS_FOREST_VERSION_TOO_LOW

8566

ERROR_DS_DOMAIN_VERSION_TOO_LOW

8567

ERROR_DS_INCOMPATIBLE_VERSION

8568

ERROR_DS_LOW_DSA_VERSION

8569

ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN

8570 8571 8572

ERROR_DS_NOT_SUPPORTED_SORT_ORDER ERROR_DS_NAME_NOT_UNIQUE ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4

8573 8574

The database is out of version store. Unable to continue operation because multiple conflicting controls were used. Unable to find a valid security descriptor reference domain for this partition. Schema update failed: The link identifier is reserved. Schema update failed: There are no link identifiers available. An account group can not have a universal group as a member. Rename or move operations on naming context heads or readonly objects are not allowed. Move operations on objects in the schema naming context are not allowed. A system flag has been set on the object and does not allow the object to be moved or renamed. This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers. DNS server unable to interpret format. DNS server failure. DNS name does not exist. DNS request not supported by name server. DNS operation refused. DNS name that ought not exist, does exist. DNS RR set that ought not exist, does exist. DNS RR set that ought to exist, does not exist. DNS server not authoritative for zone. DNS name in update or prereq is not in zone. DNS signature failed to verify. DNS bad key.

ERROR_DS_OUT_OF_VERSION_STORE ERROR_DS_INCOMPATIBLE_CONTROLS_USED

8575

ERROR_DS_NO_REF_DOMAIN

8576 8577 8578 8579

ERROR_DS_RESERVED_LINK_ID ERROR_DS_LINK_ID_NOT_AVAILABLE ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE

8580

ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC

8581

ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG

8582

ERROR_DS_MODIFYDN_WRONG_GRANDPARENT

9001 9002 9003 9004 9005 9006 9007 9008 9009 9010 9016 9017

DNS_ERROR_RCODE_FORMAT_ERROR DNS_ERROR_RCODE_SERVER_FAILURE DNS_ERROR_RCODE_NAME_ERROR DNS_ERROR_RCODE_NOT_IMPLEMENTED DNS_ERROR_RCODE_REFUSED DNS_ERROR_RCODE_YXDOMAIN DNS_ERROR_RCODE_YXRRSET DNS_ERROR_RCODE_NXRRSET DNS_ERROR_RCODE_NOTAUTH DNS_ERROR_RCODE_NOTZONE DNS_ERROR_RCODE_BADSIG DNS_ERROR_RCODE_BADKEY

9018 9501 9502 9503 9504 9505 9551 9552 9553 9554 9555 9556 9557 9558 9559 9560 9561 9601 9602 9603 9604 9605 9606 9607 9608 9609 9610 9611 9612 9613 9614

DNS signature validity expired. No records found for given DNS query. Bad DNS packet. No DNS packet. DNS error, check rcode. Unsecured DNS packet. Invalid DNS type. Invalid IP address. Invalid property. Try DNS operation again later. Record for given name and type is not unique. DNS name does not comply with RFC specifications. DNS name is a fully-qualified DNS name. DNS name is dotted (multilabel). DNS name is a single-part name. DSN name contains an invalid character. DNS name is entirely numeric. DNS zone does not exist. DNS zone information not available. Invalid operation for DNS zone. Invalid DNS zone configuration. DNS zone has no start of authority (SOA) record. DNS zone has no name server (NS) record. DNS zone is locked. DNS zone creation failed. DNS zone already exists. DNS automatic zone already exists. Invalid DNS zone type. Secondary DNS zone requires master IP address. DNS zone not secondary. Need secondary IP address.

DNS_ERROR_RCODE_BADTIME DNS_INFO_NO_RECORDS DNS_ERROR_BAD_PACKET DNS_ERROR_NO_PACKET DNS_ERROR_RCODE DNS_ERROR_UNSECURE_PACKET DNS_ERROR_INVALID_TYPE DNS_ERROR_INVALID_IP_ADDRESS DNS_ERROR_INVALID_PROPERTY DNS_ERROR_TRY_AGAIN_LATER DNS_ERROR_NOT_UNIQUE DNS_ERROR_NON_RFC_NAME DNS_STATUS_FQDN DNS_STATUS_DOTTED_NAME DNS_STATUS_SINGLE_PART_NAME DNS_ERROR_INVALID_NAME_CHAR DNS_ERROR_NUMERIC_NAME DNS_ERROR_ZONE_DOES_NOT_EXIST DNS_ERROR_NO_ZONE_INFO DNS_ERROR_INVALID_ZONE_OPERATION DNS_ERROR_ZONE_CONFIGURATION_ERROR DNS_ERROR_ZONE_HAS_NO_SOA_RECORD DNS_ERROR_ZONE_HAS_NO_NS_RECORDS DNS_ERROR_ZONE_LOCKED DNS_ERROR_ZONE_CREATION_FAILED DNS_ERROR_ZONE_ALREADY_EXISTS DNS_ERROR_AUTOZONE_ALREADY_EXISTS DNS_ERROR_INVALID_ZONE_TYPE DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP DNS_ERROR_ZONE_NOT_SECONDARY DNS_ERROR_NEED_SECONDARY_ADDRESSES

9615 9616 9617 9618 9651 9652 9653 9654 9655 9701 9702 9703 9704 9705 9706 9707 9708 9709 9710 9711 9712 9713 9714 9715 9716 9717 9718 9719

WINS initialization failed. Need WINS servers. NBTSTAT initialization call failed. Invalid delete of start of authority (SOA) Primary DNS zone requires datafile. Invalid datafile name for DNS zone. Failed to open datafile for DNS zone. Failed to write datafile for DNS zone. Failure while reading datafile for DNS zone. DNS record does not exist. DNS record format error. Node creation failure in DNS. Unknown DNS record type. DNS record timed out. Name not in DNS zone. CNAME loop detected. Node is a CNAME DNS record. A CNAME record already exists for given name. Record only at DNS zone root. DNS record already exists. Secondary DNS zone data error. Could not create DNS cache data. DNS name does not exist. Could not create pointer (PTR) record. DNS domain was undeleted. The directory service is unavailable. DNS zone already exists in the directory service. DNS server not creating or reading the boot file for the directory service integrated DNS zone.

DNS_ERROR_WINS_INIT_FAILED DNS_ERROR_NEED_WINS_SERVERS DNS_ERROR_NBSTAT_INIT_FAILED DNS_ERROR_SOA_DELETE_INVALID DNS_ERROR_PRIMARY_REQUIRES_DATAFILE DNS_ERROR_INVALID_DATAFILE_NAME DNS_ERROR_DATAFILE_OPEN_FAILURE DNS_ERROR_FILE_WRITEBACK_FAILED DNS_ERROR_DATAFILE_PARSING DNS_ERROR_RECORD_DOES_NOT_EXIST DNS_ERROR_RECORD_FORMAT DNS_ERROR_NODE_CREATION_FAILED DNS_ERROR_UNKNOWN_RECORD_TYPE DNS_ERROR_RECORD_TIMED_OUT DNS_ERROR_NAME_NOT_IN_ZONE DNS_ERROR_CNAME_LOOP DNS_ERROR_NODE_IS_CNAME DNS_ERROR_CNAME_COLLISION DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT DNS_ERROR_RECORD_ALREADY_EXISTS DNS_ERROR_SECONDARY_DATA DNS_ERROR_NO_CREATE_CACHE_DATA DNS_ERROR_NAME_DOES_NOT_EXIST DNS_WARNING_PTR_CREATE_FAILED DNS_WARNING_DOMAIN_UNDELETED DNS_ERROR_DS_UNAVAILABLE DNS_ERROR_DS_ZONE_ALREADY_EXISTS DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE

9751 9752 9753 9801 9851 9852 10004

DNS AXFR (zone transfer) complete. DNS zone transfer failed. Added local WINS server. Secure update call needs to continue update request. TCP/IP network protocol not installed. No DNS servers configured for local system. A blocking operation was interrupted by a call to WSACancelBlockingCall. The file handle supplied is not valid. An attempt was made to access a socket in a way forbidden by its access permissions. The system detected an invalid pointer address in attempting to use a pointer argument in a call. An invalid argument was supplied. Too many open sockets. A non-blocking socket operation could not be completed immediately. A blocking operation is currently executing. An operation was attempted on a non-blocking socket that already had an operation in progress. An operation was attempted on something that is not a socket. A required address was omitted from an operation on a socket. A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself. A protocol was specified in the socket function call that does not support the semantics of the socket type requested. An unknown, invalid, or unsupported option or level was

DNS_INFO_AXFR_COMPLETE DNS_ERROR_AXFR DNS_INFO_ADDED_LOCAL_WINS DNS_STATUS_CONTINUE_NEEDED DNS_ERROR_NO_TCPIP DNS_ERROR_NO_DNS_SERVERS WSAEINTR

10009 10013

WSAEBADF WSAEACCES

10014

WSAEFAULT

10022 10024 10035

WSAEINVAL WSAEMFILE WSAEWOULDBLOCK

10036 10037

WSAEINPROGRESS WSAEALREADY

10038 10039 10040

WSAENOTSOCK WSAEDESTADDRREQ WSAEMSGSIZE

10041

WSAEPROTOTYPE

10042

WSAENOPROTOOPT

specified in a getsockopt or setsockopt call. 10043 The requested protocol has not been configured into the system, or no implementation for it exists. The support for the specified socket type does not exist in this address family. The attempted operation is not supported for the type of object referenced. The protocol family has not been configured into the system or no implementation for it exists. An address incompatible with the requested protocol was used. Only one usage of each socket address (protocol/network address/port) is normally permitted. The requested address is not valid in its context. A socket operation encountered a dead network. A socket operation was attempted to an unreachable network. The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. An established connection was aborted by the software in your host machine. An existing connection was forcibly closed by the remote host. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. A connect request was made on an already connected socket. A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied. WSAEPROTONOSUPPORT

10044

WSAESOCKTNOSUPPORT

10045

WSAEOPNOTSUPP

10046

WSAEPFNOSUPPORT

10047

WSAEAFNOSUPPORT

10048

WSAEADDRINUSE

10049 10050 10051

WSAEADDRNOTAVAIL WSAENETDOWN WSAENETUNREACH

10052

WSAENETRESET

10053

WSAECONNABORTED

10054

WSAECONNRESET

10055

WSAENOBUFS

10056 10057

WSAEISCONN WSAENOTCONN

10058

A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. Too many references to some kernel object. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. No connection could be made because the target machine actively refused it. Cannot translate name. Name component or name was too long. A socket operation failed because the destination host was down. A socket operation was attempted to an unreachable host. Cannot remove a directory that is not empty. A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously. Ran out of quota. Ran out of disk quota. File handle reference is no longer available. Item is not available locally. WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. The Windows Sockets version requested is not supported. Either the application has not called WSAStartup, or WSAStartup failed. Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.

WSAESHUTDOWN

10059 10060

WSAETOOMANYREFS WSAETIMEDOUT

10061

WSAECONNREFUSED

10062 10063 10064

WSAELOOP WSAENAMETOOLONG WSAEHOSTDOWN

10065

WSAEHOSTUNREACH

10066 10067

WSAENOTEMPTY WSAEPROCLIM

10068 10069 10070 10071 10091

WSAEUSERS WSAEDQUOT WSAESTALE WSAEREMOTE WSASYSNOTREADY

10092 10093

WSAVERNOTSUPPORTED WSANOTINITIALISED

10101

WSAEDISCON

10102

No more results can be returned by WSALookupServiceNext. A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. The procedure call table is invalid. The requested service provider is invalid. The requested service provider could not be loaded or initialized. A system call that should never fail has failed. No such service is known. The service cannot be found in the specified name space. The specified class was not found. No more results can be returned by WSALookupServiceNext. A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. A database query failed because it was actively refused. No such host is known. This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server. A non-recoverable error occurred during a database lookup. The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for. At least one reserve has arrived. At least one path has arrived. There are no senders. There are no receivers. Reserve has been confirmed.

WSAENOMORE

10103

WSAECANCELLED

10104 10105 10106

WSAEINVALIDPROCTABLE WSAEINVALIDPROVIDER WSAEPROVIDERFAILEDINIT

10107 10108

WSASYSCALLFAILURE WSASERVICE_NOT_FOUND

10109 10110

WSATYPE_NOT_FOUND WSA_E_NO_MORE

10111

WSA_E_CANCELLED

10112 11001 11002

WSAEREFUSED WSAHOST_NOT_FOUND WSATRY_AGAIN

11003

WSANO_RECOVERY

11004

WSANO_DATA

11005 11006 11007 11008 11009

WSA_QOS_RECEIVERS WSA_QOS_SENDERS WSA_QOS_NO_SENDERS WSA_QOS_NO_RECEIVERS WSA_QOS_REQUEST_CONFIRMED

11010 11011 11012 11013

Error due to lack of resources. Rejected for administrative reasons - bad credentials. Unknown or conflicting style. Problem with some part of the filterspec or providerspecific buffer in general. Problem with some part of the flowspec. General QOS error. An invalid or unrecognized service type was found in the flowspec. An invalid or inconsistent flowspec was found in the QOS structure. Invalid QOS provider-specific buffer. An invalid QOS filter style was used. An invalid QOS filter type was used. An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR. An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer. An incorrect number of flow descriptors was specified in the QOS structure. An unrecognized object was found in the QOS providerspecific buffer. An invalid policy object was found in the QOS providerspecific buffer. An invalid QOS flow descriptor was found in the flow descriptor list. An invalid or inconsistent flowspec was found in the QOS provider-specific buffer. An invalid FILTERSPEC was found in the QOS providerspecific buffer. An invalid shape discard mode object was found in the QOS provider-specific buffer.

WSA_QOS_ADMISSION_FAILURE WSA_QOS_POLICY_FAILURE WSA_QOS_BAD_STYLE WSA_QOS_BAD_OBJECT

11014 11015 11016

WSA_QOS_TRAFFIC_CTRL_ERROR WSA_QOS_GENERIC_ERROR WSA_QOS_ESERVICETYPE

11017

WSA_QOS_EFLOWSPEC

11018 11019 11020 11021

WSA_QOS_EPROVSPECBUF WSA_QOS_EFILTERSTYLE WSA_QOS_EFILTERTYPE WSA_QOS_EFILTERCOUNT

11022

WSA_QOS_EOBJLENGTH

11023

WSA_QOS_EFLOWCOUNT

11024

WSA_QOS_EUNKNOWNPSOBJ

11025

WSA_QOS_EPOLICYOBJ

11026

WSA_QOS_EFLOWDESC

11027

WSA_QOS_EPSFLOWSPEC

11028

WSA_QOS_EPSFILTERSPEC

11029

WSA_QOS_ESDMODEOBJ

11030

An invalid shaping rate object was found in the QOS providerspecific buffer. A reserved policy element was found in the QOS providerspecific buffer. The requested section was not present in the activation context. Windows was not able to process the application binding information. Please refer to your System Event Log for further information. The application binding data format is invalid. The referenced assembly is not installed on your system. The manifest file does not begin with the required tag and format information. The manifest file contains one or more syntax errors. The application attempted to activate a disabled activation context. The requested lookup key was not found in any active activation context. A component version required by the application conflicts with another component version already active. The type requested activation context section does not match the query API used. Lack of system resources has required isolated activation to be disabled for the current thread of execution. An attempt to set the process default activation context failed because the process default activation context was already set. The specified quick mode policy already exists. The specified quick mode policy was not found. The specified quick mode policy is being used. The specified main mode policy

WSA_QOS_ESHAPERATEOBJ

11031

WSA_QOS_RESERVED_PETYPE

12000

ERROR_SXS_SECTION_NOT_FOUND

12001

ERROR_SXS_CANT_GEN_ACTCTX

12002 12003 12004

ERROR_SXS_INVALID_ACTCTXDATA_FORMAT ERROR_SXS_ASSEMBLY_NOT_FOUND ERROR_SXS_MANIFEST_FORMAT_ERROR

12005 12006

ERROR_SXS_MANIFEST_PARSE_ERROR ERROR_SXS_ACTIVATION_CONTEXT_DISABLED

12007

ERROR_SXS_KEY_NOT_FOUND

12008

ERROR_SXS_VERSION_CONFLICT

12009

ERROR_SXS_WRONG_SECTION_TYPE

12010

ERROR_SXS_THREAD_QUERIES_DISABLED

12011

ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET

13000 13001 13002 13003

ERROR_IPSEC_QM_POLICY_EXISTS ERROR_IPSEC_QM_POLICY_NOT_FOUND ERROR_IPSEC_QM_POLICY_IN_USE ERROR_IPSEC_MM_POLICY_EXISTS

already exists. 13004 13005 13006 13007 13008 13009 13010 13011 The specified main mode policy was not found. The specified main mode policy is being used. The specified main mode filter already exists. The specified main mode filter was not found. The specified transport mode filter already exists. The specified transport mode filter does not exist. The specified main mode authentication list exists. The specified main mode authentication list was not found. The specified quick mode policy is being used. The specified main mode policy already exists. The specified quick mode policy was not found. The manifest file contains one or more syntax errors. The application attempted to activate a disabled activation context. The requested lookup key was not found in any active activation context. The Main Mode filter is pending deletion. The transport filter is pending deletion. The tunnel filter is pending deletion. The Main Mode policy is pending deletion. The Main Mode authentication bundle is pending deletion. The Quick Mode policy is pending deletion. IKE authentication credentials are unacceptable. IKE security attributes are unacceptable. ERROR_IPSEC_MM_POLICY_NOT_FOUND ERROR_IPSEC_MM_POLICY_IN_USE ERROR_IPSEC_MM_FILTER_EXISTS ERROR_IPSEC_MM_FILTER_NOT_FOUND ERROR_IPSEC_TRANSPORT_FILTER_EXISTS ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND ERROR_IPSEC_MM_AUTH_EXISTS ERROR_IPSEC_MM_AUTH_NOT_FOUND

13012 13013 13014 13015 13016

ERROR_IPSEC_MM_AUTH_IN_USE ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND ERROR_IPSEC_TUNNEL_FILTER_EXISTS

13017

ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND

13018 13019 13020 13021 13022 13023 13801 13802

ERROR_IPSEC_MM_FILTER_PENDING_DELETION ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION ERROR_IPSEC_MM_POLICY_PENDING_DELETION ERROR_IPSEC_MM_AUTH_PENDING_DELETION ERROR_IPSEC_QM_POLICY_PENDING_DELETION ERROR_IPSEC_IKE_AUTH_FAIL ERROR_IPSEC_IKE_ATTRIB_FAIL

13803 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814 13815 13816 13817 13818 13819 13820 13822 13824 13825 13826 13827 13828 13829 13830 13831 13832 13833 13834

IKE Negotiation in progress. General processing error. Negotiation timed out. IKE failed to find valid machine certificate. IKE SA deleted by peer before establishment completed. IKE SA deleted before establishment completed. Negotiation request sat in Queue too long. Negotiation request sat in Queue too long. Negotiation request sat in Queue too long. Negotiation request sat in Queue too long. No response from peer. Negotiation took too long. Negotiation took too long. Unknown error occurred. Certificate Revocation Check failed. Invalid certificate key usage. Invalid certificate type. No private key associated with machine certificate. Failure in Diffie-Helman computation. Invalid header. No policy configured. Failed to verify signature. Failed to authenticate using Kerberos. Peer's certificate did not have a public key. Error processing error payload. Error processing SA payload. Error processing Proposal payload. Error processing Transform payload. Error processing KE payload. Error processing ID payload.

ERROR_IPSEC_IKE_NEGOTIATION_PENDING ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR ERROR_IPSEC_IKE_TIMED_OUT ERROR_IPSEC_IKE_NO_CERT ERROR_IPSEC_IKE_SA_DELETED ERROR_IPSEC_IKE_SA_REAPED ERROR_IPSEC_IKE_MM_ACQUIRE_DROP ERROR_IPSEC_IKE_QM_ACQUIRE_DROP ERROR_IPSEC_IKE_QUEUE_DROP_MM ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM ERROR_IPSEC_IKE_DROP_NO_RESPONSE ERROR_IPSEC_IKE_MM_DELAY_DROP ERROR_IPSEC_IKE_QM_DELAY_DROP ERROR_IPSEC_IKE_ERROR ERROR_IPSEC_IKE_CRL_FAILED ERROR_IPSEC_IKE_INVALID_KEY_USAGE ERROR_IPSEC_IKE_INVALID_CERT_TYPE ERROR_IPSEC_IKE_NO_PRIVATE_KEY ERROR_IPSEC_IKE_DH_FAIL ERROR_IPSEC_IKE_INVALID_HEADER ERROR_IPSEC_IKE_NO_POLICY ERROR_IPSEC_IKE_INVALID_SIGNATURE ERROR_IPSEC_IKE_KERBEROS_ERROR ERROR_IPSEC_IKE_NO_PUBLIC_KEY ERROR_IPSEC_IKE_PROCESS_ERR ERROR_IPSEC_IKE_PROCESS_ERR_SA ERROR_IPSEC_IKE_PROCESS_ERR_PROP ERROR_IPSEC_IKE_PROCESS_ERR_TRANS ERROR_IPSEC_IKE_PROCESS_ERR_KE ERROR_IPSEC_IKE_PROCESS_ERR_ID

13836 13837 13838 13839 13840 13841 13842 13843 13844 13845 13846 13847 13848 13849 13850 13851 13852 13853

Error processing Certificate Request payload. Error processing Hash payload. Error processing Signature payload. Error processing Nonce payload. Error processing Notify payload. Error processing Delete Payload. Error processing VendorId payload. Invalid payload received. Soft SA loaded. Soft SA torn down. Invalid cookie received.. Peer failed to send valid machine certificate. Certification Revocation check of peer's certificate failed. New policy invalidated SAs formed with old policy. There is no available Main Mode IKE policy. Failed to enabled TCB privilege. Failed to load SECURITY.DLL. Failed to obtain security function table dispatch address from SSPI. Failed to query Kerberos package to obtain max token size. Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup. Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes). Failed to obtain new SPI for the inbound SA from Ipsec driver. The most common cause for

ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ ERROR_IPSEC_IKE_PROCESS_ERR_HASH ERROR_IPSEC_IKE_PROCESS_ERR_SIG ERROR_IPSEC_IKE_PROCESS_ERR_NONCE ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY ERROR_IPSEC_IKE_PROCESS_ERR_DELETE ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR ERROR_IPSEC_IKE_INVALID_PAYLOAD ERROR_IPSEC_IKE_LOAD_SOFT_SA ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN ERROR_IPSEC_IKE_INVALID_COOKIE ERROR_IPSEC_IKE_NO_PEER_CERT ERROR_IPSEC_IKE_PEER_CRL_FAILED ERROR_IPSEC_IKE_POLICY_CHANGE ERROR_IPSEC_IKE_NO_MM_POLICY ERROR_IPSEC_IKE_NOTCBPRIV ERROR_IPSEC_IKE_SECLOADFAIL ERROR_IPSEC_IKE_FAILSSPINIT

13854

ERROR_IPSEC_IKE_FAILQUERYSSP

13855

ERROR_IPSEC_IKE_SRVACQFAIL

13856

ERROR_IPSEC_IKE_SRVQUERYCRED

13857

ERROR_IPSEC_IKE_GETSPIFAIL

this is that the driver does not have the correct filter. Check your policy to verify the filters. 13858 13859 13860 Given filter is invalid. Memory allocation failed. Failed to add Security Association to IPSec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine. Invalid policy. Invalid DOI. Invalid situation. Diffie-Hellman failure. Invalid Diffie-Hellman group. Error encrypting payload. Error decrypting payload. Policy match error. Unsupported ID. Hash verification failed. Invalid hash algorithm. Invalid hash size. Invalid encryption algorithm. Invalid authentication algorithm. Invalid certificate signature. Load failed. Deleted via RPC call. Temporary state created to perform reinit. This is not a real failure. The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine. SA reaped because QM limit was reached. Key length in certificate is too small for configured security requirements. Max number of established MM SAs to peer exceeded. ERROR_IPSEC_IKE_INVALID_FILTER ERROR_IPSEC_IKE_OUT_OF_MEMORY ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED

13861 13862 13863 13864 13865 13866 13867 13868 13869 13870 13871 13872 13873 13874 13875 13876 13877 13878

ERROR_IPSEC_IKE_INVALID_POLICY ERROR_IPSEC_IKE_UNKNOWN_DOI ERROR_IPSEC_IKE_INVALID_SITUATION ERROR_IPSEC_IKE_DH_FAILURE ERROR_IPSEC_IKE_INVALID_GROUP ERROR_IPSEC_IKE_ENCRYPT ERROR_IPSEC_IKE_DECRYPT ERROR_IPSEC_IKE_POLICY_MATCH ERROR_IPSEC_IKE_UNSUPPORTED_ID ERROR_IPSEC_IKE_INVALID_HASH ERROR_IPSEC_IKE_INVALID_HASH_ALG ERROR_IPSEC_IKE_INVALID_HASH_SIZE ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG ERROR_IPSEC_IKE_INVALID_AUTH_ALG ERROR_IPSEC_IKE_INVALID_SIG ERROR_IPSEC_IKE_LOAD_FAILED ERROR_IPSEC_IKE_RPC_DELETE ERROR_IPSEC_IKE_BENIGN_REINIT

13879

ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY

13880 13881

ERROR_IPSEC_IKE_QM_LIMIT_REAP ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN

13882

ERROR_IPSEC_IKE_MM_LIMIT

Built on Tuesday, December 05, 2000.

To download the latest headers, libraries, and samples, see Obtaining the Complete SDK . Send feedback to the Platform SDK.

© 2000 Microsoft Corporation. All rights reserved. Terms of Use.

Information

http://msdn.microsoft.com/library/psdk/psdkref/errlist_9usz.htm

83 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

140469


You might also be interested in

BETA
ATV212_lonworks_EN_S1A53848_01
Embedded Programming Guide
User_Guide_Large.book