Read Microsoft Word - Industrial Painter PV Packet Cover.doc text version

Performance Verification Packet

INDUSTRIAL PAINTER

This performance verification is designed as one method to evaluate job skills and safe work habits of a participant. The performance of the participant must be evaluated by an NCCER certified evaluator, at an NCCER authorized assessment site and be approved by an NCCER accredited assessment center.

Last Updated: March 2, 2004 NCCER 13614 ProgressBlvd·Alachua,FL 32615 1-888-622-3720

NCCER PERFORMANCE VERIFICATION CANDIDATE SUMMARY INDUSTRIAL PAINTER

Objective

The candidate will demonstrate the ability to clean with power tools, spray paint, brush and roll paint, and use proper rigging techniques. The candidate must complete these key tasks within time specified by evaluator.

Scope

This Performance Verification provides a means to observe and evaluate competencies in the following areas: · · · · · · Power tool cleaning Spray painting Brush and roller painting Rigging Sand blasting Water blasting

Materials Required

· · · · · · · · · Paint and mixing specifications Brush­Roller­Pan Spray Gun Cleaning tools Drop cloths Compressor/Pot/Hoses, etc. Cleaning supplies (MSDS for chemicals / solvents) Rigging equipment Personal Protective Equipment

Time Required

To be determined based on job site conditions.

Tasks

· Power Tool Cleaning Connect and run air hoses Connect oiler whips Connect power tool (sander/needle gun) Clean area to be painted Clean-up work area

NCCER 13614 Progress Blvd · Alachua, FL 32615 1-888-622-3720

Last Updated: March 2, 2004

NCCER PERFORMANCE VERIFICATION CANDIDATE SUMMARY INDUSTRIAL PAINTER

Tasks (cont'd)

· Spray Painting Set up Tear down and rebuild gun Put gun in spray line Verify wind direction Mix paint to specifications Connect air supply to pot Check spray pattern Apply spray paint (600 square feet) Clean up (equipment and work area) · Brush and roll painting Place drop cloths Mix paint to specifications Apply paint (600 square foot) Clean up (equipment and work area) · Rigging (You will be given specific tasks by your evaluator) Safety harness Life lines Clamps-on-cable Cable protector

NCCER 13614 Progress Blvd · Alachua, FL 32615 1-888-622-3720

Last Updated: March 2, 2004

NCCER PERFORMANCE EVALUATOR CHECKLIST INDUSTRIAL PAINTER Date Completed Task To Perform __-__-__ 1. Power tool Cleaning

· · · · · · · · · · · · · · · · · · · · · · · · · Air lines connected properly Pitted rust removed Edges feathered Proper clean up of work area Barricaded Work area Breathing line to hood when sand Blasting Even stokes while sand Blasting Maintain at least 12" distance from surface when Water Blasting Equipment checked Wind direction verified Checked spray pattern Paint mixed properly Top to bottom Check with wet mill gauge 50% Overlap Check for holidays Proper clean up (Equipment and work area) Paint mixed properly Drop cloths placed correctly Runs Check for holidays Proper clean up (Equipment and work area) Proper techniques Used PPE Practiced good safety procedures

__-__-__

2.

Spray painting

__-__-__

3.

Brush and roller painting

__-__-__ __-__-__

4. 5.

Rigging Safety

NCCER 13614 Progress Blvd · Alachua, FL 32615 1-888-622-3720

Last Updated: March 2, 2004

Performance Verification Form How to fill out and file your information

Participant

1) Print your last name, first name, and social security number. 2) Print your company name, current employer, and the state where your employer's main office is located. 3) In the space provided for "Participant Signature," sign your name and enter the date you signed the form.

Performance Evaluator

1) In the space provided for "Site Code," enter the postal zip code of the location where the performance verification is being conducted. 2) In the column provided for "Date," enter the date the participant completed each of the tasks. This date is important because there may be times a participant does not complete a performance verification in one day. 3) In the space provided for "Performance Evaluator," sign your name. 4) In the space provided for "Date," next to your signature, list the date the participant successfully completed all of the tasks.

Administrator

1) In the space provided for "Administrator," sign your name. Your signature indicates that the performance evaluator is certified to conduct this performance verification and that it was conducted within the guidelines of the NCCER. 2) In the space provided for "Date," next to your signature, list the date that this performance verification form is being sent to the NCCER for entry into the National Registry. 3) In the space provided for "Accredited Assessment Center," print the name of the accredited assessment center that is conducting this performance verification.

Last Updated: March 5, 2004 National Center for Construction Education and Research · 3600 NW 43rd Street , Bldg. G · Gainesville, FL 32606 Telephone 352.334.0911 · Fax 352.334.0929

PERFORMANCE VERIFICATION FORM

INDUSTRIAL PAINTER PVPTNGO7- CRAFT

Candidate information

Last Name

First Name

SSN or SGN

Employer/Company Name Evaluator

State

Code

Last Name

First Name

SSN or SGN

TASK # 01 02 03 04 05

SPECIFIC DUTIES/TASKS Power Tool Cleaning (Modules 07404 and 07405) Spray Painting (Modules 07407, 07408, 07409) Brush and Roller Painting (Modules 07407, 07409, and 07109) Rigging (Module 00106) Safety (Modules 00101 and 07102)

DATE

START TIME

END TIME

Consent/Release:

I, the undersigned, do hereby authorize the National Center for Construction Education and Research (NCCER) to release the information and results attained through the administration of the National Craft Assessment and Certification Program (NCACP) to the organization referenced below, and acknowledge that the employer noted above is my present employer.

ACCREDITED ASSESSMENT CENTER: PARTICIPANT: PERFORMANCE EVALUATOR: ADMINISTRATOR:

S I G N A T U R E S I G N A T U R E S I G N A T U R E

Last Updated: June 8, 2011

DATE: DATE: DATE:

Return Completed Form To: NCCER Registry · 13614 Progress Blvd · Alachua, FL 32615 1-888-622-3720

Information

Microsoft Word - Industrial Painter PV Packet Cover.doc

6 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

542758