Read Vecchio Complete CV 3-10 text version

KENNETH S. VECCHIO

Professor of Nanoengineered Materials Chair, Department of NanoEngineering University of California, San Diego La Jolla, California (858) 822-7922 E-mail: [email protected]

Professional Experience

Department Chair, 11/07-present: Department of NanoEngineering, task of leading the effort to create the first of its kind multi-disciplinary engineering department, integrating Materials Science, Chemical-, Mechanical-, Electrical-, Bio-engineering and Medicine, focused on nanoscale phenomena. Department formally established July 07, with faculty formally appointed Nov.-07. Professor of Materials Science and Engineering 7/99-10-07: Teaching undergraduate courses in the areas of: Introduction to Materials Science, Mechanical Behavior of Engineering Materials, and Mechanical Design and Materials Selection; graduate courses in each: Scanning, Transmission, and Analytical Electron Microscopy (Lecture and Lab. courses), crystallography, and dynamic and mechanical behavior. Recent programs include the synthesis, processing, and characterization of anisotropic laminate materials including metallic-intermetallic laminate composites, ceramic-metal layered materials, and polymerceramic layered materials such as shells. NanoMaterials, Carbon Nanotube synthesis, nanoparticulate reinforced polymers and composites, and polymer deformation modeling are additional areas of research over the past 3 years. Currently 8 Ph.D. students, 4 undergraduates, and one post-Doctoral researcher work on these research projects. Assistant, then Associate Professor of Materials Science and Director of the Electron Optics and Microanalysis Facility for the School of Engineering, UCSD, Department of Applied Mechanics and Engineering Sciences, 8/88-6/99. Consultant, UCSD, 8/88-Present, consultant to several companies in the southern California area, and expert witness in failure analyses, including legal depositions and court room experience. Failure analysis, materials characterization and the application of fracture mechanics to fatigue and fracture of structural materials, including metal alloys, ceramics, plastics, and composites. Material processing of structural components and how it relates to performance. Corrosion and Environmental damage of metal components. Computer Animation of Failure Events. Lecturer, Laboratory Instructor, Lehigh University Electron Microscopy Short Courses, 1988

Educational Background

Ph.D., Materials Science and Engineering, Lehigh University, 1988 Advisor: Dr. David B. Williams M.S., Metallurgy and Materials Science, Lehigh University, 1985 Advisor: Dr. Richard W. Hertzberg B.S., Metallurgical Engineering and Materials Science, Carnegie-Mellon University, 1983 Senior Thesis Advisor: Dr. I. M. Bernstein

Awards and Honors

* * * * * * * * * Fellow of the American Society for Metals (ASM International), 2009 Year 2000 Marcus A. Grossman Young Author Award Presidential Scholarship from Electron Microscopy Society of America (EMSA), 1985 Lehigh University Tuition Scholarship, 1985-86, 1986-87 Irene Payne Award from Microbeam Analysis Society (MAS), 1986 Irene Payne Award from Microbeam Analysis Society (MAS), 1987 Microbeam Analysis Society (MAS) Scholarship, 1987 1st Prize Materials Research Center Review Seminar, Lehigh University, April 1987 George P. Conard II, Award for Outstanding Graduate Achievement at Lehigh University, 1987

Professional and Personal Contributions

· · · · · · · · · · · · · · · · · · · · · · · · · Faculty Advisor, UCSD Student Chapter of The American Society of Mech. Engs, 1990. Member, UCSD Acad. Senate Comm. on Undergrad. Prep. and Education, 1989-91. Organizing Committee for AEM Workshop on Convergent Beam Electron Diffraction, held at Microbeam Analysis Society Annual Meeting, 1993, Los Angeles, CA. Reviewer of numerous manuscripts for Metallurgical and Materials Transactions, ~5/year. National Science Foundation, Synthesis & Processing Initiative, Proposal Panelist, 1992. Member, UCSD University Committee on Registration Fees, 1992-93, 1993-94. Undergraduate Affairs Committee, AMES Department, 1992-1997. Invited speaker at Joint AIRAPT/APS Conference in Colorado Springs, CO, June 1993. Session chair for CBED section of AEM workshop at Microbeam Analysis Society, 1993. Session chair for Aerospace Materials session at Microbeam Analysis Society, 1993. Invited speaker at Microbeam Analysis Society Meeting, Los Angeles, CA 1993. Proposal reviewer for the Division of Materials Research, National Science Foundation, ~5/year. Chair, Materials Science Examination Committee, UCSD, 1993-97. Committee on Undergraduate Laboratory Facilities for AMES, 1994-96. Invited speaker and Session Chair at the TMS Annual Meeting, Rosemont, IL., (1994). Symposium Organizer and Session Chair at the TMS Annual Meeting, IL., (1998). Committee on Undergraduate Laboratories for MAE, 1999-2000. Chair, Committee on Undergraduate Laboratories for MAE, 2000-2001. Invited speaker and Session Chair at the TMS Annual Meeting, (1999). Symposium Organizer and Session Chair at the TMS Annual Meeting, (2000). Materials Science and Engineering Program Executive Committee, 1999-2001. Materials Science and Engineering Program Admissions Committee, 1999-2001. Mechanical and Aerospace Engineering Department Chair's Executive Council, 2000-01. Vice-Chair, Board of Review, Metallurgical and Materials Transactions, 1998-2000. Chair, Board of Review, Metallurgical and Materials Transactions, 2000-2001.

KENNETH S. VECCHIO PUBLICATION LIST

A. I. PUBLISHED WORK Refereed Journal Articles Vecchio, K. S., and R. W. Hertzberg, "Analysis of Long Term Reliability of Plated-Through Holes in Multilayer Interconnection Boards. Part A: Stress Analyses and Material Characterization," Microelectronics and Reliability, 1986, 26 (4), pp. 715-732. Vecchio, K. S., and R. W. Hertzberg, "Analysis of Long Term Reliability of Plated-Through Holes in Multilayer Interconnection Boards. Part B: Fatigue Results and Fracture Mechanisms," Microelectronics and Reliability, 1986, 26 (4), pp. 733-751. Vecchio, K. S., and D. B. Williams, "Experimental Conditions Affecting Coherent Bremsstrahlung in X-ray Microanalysis," Journal of Microscopy, 1987, 147, pp. 15-35. Vecchio, K. S., and D. B. Williams, "Convergent Beam Electron Diffraction Study of Al3Zr in Al-Zr and Al-Li-Zr Alloys," Acta Metallurgica, 1987, 35, pp. 2959-2970. Vecchio, K. S., and D. B. Williams, "A Non-Icosahedral T2 (Al6Li3Cu) Phase," Philosophical Magazine A, 1988, 57, pp. 535546. Vecchio, K. S., and R. W. Hertzberg, "The Influence of Stacking Fault Energy on Ductile Fracture Micromorphology," Journal of Materials Science, 1988, 23, pp. 2220-2224. Vecchio, K. S., and D. B. Williams, "The Apparent Five-Fold Nature of Large T2 (Al6Li3Cu) Crystals," Metallurgical Transactions A, 1988, 19A, pp. 2875-2884. Vecchio, K. S., and D. B. Williams, "Convergent Beam Electron Diffraction Analysis of the T1 (Al2CuLi) Phase in Al-Li-Cu Alloys," Metallurgical Transactions A, 1988, 19A, pp. 2885-2892. R. W. Hertzberg, K. S. Vecchio, and F. E. Schmidt, Jr., "Fatigue Performance of AISI 1140 Modified Steel," Journal of Testing.and Evaluation, 1989, 17, (5), pp. 261-266. Vecchio, K. S., R. W. Hertzberg, and F. E. Schmidt, Jr., "Fractography of AISI 1140 Modified Steel Under Static and Cyclic Loading Conditions," Journal of Testing and Evaluation, 1989, 17 (5), pp. 267-272. Borchert, Andreas M., Kenneth S. Vecchio, and Robert Stein, "The Use of Charging Effects in Al/Al2O3 Metal-Matrix Composites as a Contrast Mechanism in the SEM", Scanning, 1991, 13, pp. 344349. Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

12. Vecchio, Kenneth S., John A. Hunt, and David B. Williams, "Transmission Electron Microscope In-Situ Fatigue Experiments: A Computer Control Approach", Journal of Electron Microscopy Technique, 1991, 17, pp. 351-355. Vecchio, K. S., J. LaSalvia, M. A. Meyers, and George T. Gray,III, "Microstructural Characterization of Self-Propagating High Temperature Synthesis/Dynamically Compacted and Hot-Pressed Titanium Carbides", Metallurgical Transactions A, 1992, Vol. 23A, pp. 87-97. Meyers, M. A., L. W. Meyer, K. S. Vecchio, and U. Andrade, "High Strain, High Strain-Rate Deformation of Copper," Journal De Physique IV, Colloque C3, suppl. au Journal de Physique III, Oct. 1991, 1, pp. 11-17. Kenneth S. Vecchio, Li-Hsing Yu, and Marc A. Meyers, "Shock Synthesis of Silicides, Part 1: Experimentation and Microstructural Evolution," Acta Metallurgica et Materialia, 1994, 42(3), pp. 701-714. Marc A. Meyers, Li-Hsing Yu, and Kenneth S. Vecchio, "Shock Synthesis of Silicides, Part 2: Thermodynamics and Kinetics," Acta Metallurica et Materialia, 1994, 42(3), pp. 715-729. Sun Ig Hong, George T. Gray, III, and Kenneth S. Vecchio, "Quenching and Thermal Cycling Effects in a 1060 Al Matrix - 10 vol.% Al2O3 Particulate Reinforced Metal Matrix Composite," Materials Science and Engineering, 1993, A171, pp. 181-189. Vinod Sharma, S. Nemat-Nasser, and Kenneth S. Vecchio, "Dynamic-compression Fatigue of Hot-Pressed Silicon-Nitride," Experimental Mechanics, December 1994, pp. 315-323. U. Andrade, M. A. Meyers, K. S. Vecchio, and A. H. Chokshi, "Dynamic Recrystallization in High-Strain, High-Strain-Rate Plastic Deformation of Copper," Acta Metallurgica et Materialia, 1994, 42, No.9, pp. 3183-3195. Kenneth S. Vecchio, Michael Fitzpatrick and Dwaine Klarstrom, "Influence of Sub-Solvus Thermomechanical Processing on the Low Cycle Fatigue Properties of HAYNES 230 Alloy," Metallurgical and Materials Transactions, 26A, 1995, pp. 673-689. D. Martello, K. S. Vecchio, J. R. Diehl, R. Graham, J. P. Tamilia, and S. S. Pollock, "Do dislocations and stacking faults increase the oxidation rate of pyrites?," Geochimica et Cosmochimica Acta, 1994, 58, No. 21, pp. 4657-4665. (Previously entitled "Reactivity of Pyrites") Refereed Journal Article

13.

Refereed Journal Article

14.

Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article

15.

16.

17.

18.

19.

20.

21.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

22. Timothy R. Smith and Kenneth S. Vecchio, "Synthesis and Mechancial Properties of Nano-Scale Mechanically-Milled NiAl" Nanostructured Materials, 1995, 5 (1), 11-23. Aniruddha Thakur, Sia Nemat-Nasser, and Kenneth S. Vecchio, "Dynamic Bauschinger Effect," Acta Materialia, 1996, 44 (7), 2797-2807. Bimal Kad, Kenneth S. Vecchio, Robert J. Asaro, and Bernard P. Bewlay, "On the Nature of Faults in MoSi2", Philosophical Magazine A, 1995, 72 (1), pp. 1-19. Kenneth S. Vecchio and George T. Gray, III, "Shock-Loading Response of 6061-T6 Aluminum Metal-Matrix Composites," Metallurgical and Materials Transactions A, October 1995, 26A, 2545-2553. George T. Gray, III and Kenneth S. Vecchio, "Influence of Peak Pressure and Temperature on the Structure/Property Response of Shock-Loaded Ta and Ta-10W," Metallurgical and Materials Transactions A, October 1995, 26A, 2555-2563. Aniruddha Thakur, Kenneth S. Vecchio, and Sia Nemat-Nasser, "Bauschinger Effect in HAYNES 230 Alloy: Influence of Strain Rate and Temperature," Metallurgical and Materials Transactions A, 1996, 27A, 1739-1748. Rajeev Kapoor and Kenneth S. Vecchio, "Deformation Behavior and Failure Mechanisms in Particulate Reinforced 6061 Al MetalMatrix Composites," Materials Science and Engineering, A202, (1995) pp. 63-75. J. A. Hines and K. S. Vecchio, "Recrystallization Kinetics Within Adiabatic Shear Bands," Acta Materialia, 1997, Vol. 45 (2), pp. 635-649. A. J. Strutt and K. S. Vecchio, "On the Structure of Faults in Pyrites," Philosophical Magazine A, 1996, 73 (3), pp. 779-801. Bing-Jean Lee, Kenneth S. Vecchio, Said Ahzi, and Scott Schoenfeld, "Modeling the Mechanical Behavior of Tantalum," Metallurgical and Materials Transactions, (1997) 28A, 113-122. Vinod Sharma, Kenneth S. Vecchio, and S. Nemat-Nasser, "Effect of Grain Boundary Phase on Dynamic Compression Fatigue in Hot-Pressed Silicon Nitride," Journal of the American Ceramic Society, 1998, 81, pp. 129-139. Joy A. Hines, Kenneth S. Vecchio, and Said Ahzi, "A Model for Microstructural Evolution in Adiabatic Shear Bands," Metallurgical and Materials Transactions A, 1998, 29A, pp. 191-203. Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article

23.

24.

25.

26.

27.

Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article

28.

29.

30.

31.

32.

33.

KENNETH S. VECCHIO PUBLICATION LIST

34. Vinod Sharma, S. Nemat-Nasser, and Kenneth S. Vecchio, "Modeling the Strain Rate Dependence of Fatigue Life of HotPressed Silicon Nitride," Mechanics of Materials, 1998, 29, pp. 253-273 Strutt, Andrew J. and Kenneth S. Vecchio, "Simultaneous Oxidation and Sigma-Phase Formation in a Stainless Steel," Metallurgical and Materials Transactions A, 30A, February 1999, pp. 355-362. A. R. Boccaccini, A. J. Strutt, K. S. Vecchio, D. Mendoza, K. K. Chawla, C. B. Ponton and D. H. Pearce, "Behavior of NicalonFiber Reinforced Glass Matrix Composites under Cycling Conditions," Composites `A', 1998, 29, 1343-1352. Levin, B.F., K. S. Vecchio, J.N. Dupont, and A.R. Marder, "Modeling Solid-Particle Erosion of Ductile Alloys", Metallurgical and Materials Transactions, 30A, July 1999, 1763-1774. Harach, David J. and Kenneth S. Vecchio, "Microstructure Evolution in Metal-Intermetallic Laminate (MIL) Composites Synthesized by Reactive Foil Sintering in Air", Metallurgical and Materials Transactions, 32A, 2001, pp. 1493-1505. M.E. Kassner, M.-T. Perez-Prado, K.S. Vecchio, and M.A. Wall, "Determination of Internal Stresses in Cyclically Deformed Copper Single Crystals using Convergent-Beam Electron Diffraction and Dislocation Dipole Separation Measurements", Acta Materialia, 48 (2000) pp. 4247-4254. Aashish Rohatgi, Kenneth S. Vecchio, and George T. Gray III, "The Influence of Stacking Fault Energy on the Mechanical Behavior of Cu and Cu-Al Alloys: Deformation Twinning, Work Hardening, and Dynamic Recovery", Metallurgical and Materials Transactions A, 32A, January 2001, pp. 135-145. R. Menig, M.H. Meyers, M.A. Meyers, and K.S. Vecchio, "Quasistatic and Dynamic Mechanical Response of Haliotis Rufescens (Abalone) Shells", Acta Materialia, 48 (2000) 2383-2398. R. Menig, M.H. Meyers, M.A. Meyers, and K.S. Vecchio, "QuasiStatic and dynamic mechanical response of Strombus gigas (conch) shells", Mater. Sci. & Eng., A297 (2001) pp. 203-211. Gray, G.T., III, Shuh Rong Chen, and K. S. Vecchio, "Influence of grain size on the constitutive response and substructure evolution of MONEL 400", Metallurgical and Materials Transactions A, 30A, May 1999, pp. 1235-1247. Refereed Journal Article

35.

Refereed Journal Article

36.

Refereed Journal Article Refereed Journal Article Refereed Journal Article

37.

38.

39.

Refereed Journal Article

40.

Refereed Journal Article

41.

Refereed Journal Article Refereed Journal Article Refereed Journal Article

42.

43.

KENNETH S. VECCHIO PUBLICATION LIST

44. M.E. Kassner, M.-T. Perez-Prado, and K.S. Vecchio, "Internal Stress Measurements by Convergent Beam Electron Diffraction on Creep Deformed Al Single Crystals," Materials Science and Engineering: A 319-321 (0) (2001) pp. 730 -734. M. T. Perez-Prado, J. A. Hines, and Kenneth S. Vecchio, "Microstructural Evolution in Adiabatic Shear Bands in Ta and Ta-W Alloys," Acta Materialia, 49(15), 2001, pp. 2905-2917. A. Rohatgi, K.S. Vecchio, and G.T. Gray III, "A Metallographic and Quantitative Analysis of the Influence of Stacking Fault Energy on Shock Hardening in Cu and Cu-Al Alloys", Acta Materialia, 49, (2001), pp. 427-438. Parker, F.T. Spada, F.E. Berkowitz, A.E. Vecchio, K.S. Lavernia, E.J. and Rodriguez, R., "Thick amorphous ferromagnetic coatings via thermal spraying of spark-eroded powder," Materials Letters, 48, (no.3-4), Elsevier, April 2001, pp.184-187. M.E. Kassner, M.-T. Pérez-Prado, M. Long, and K.S. Vecchio, "Dislocation Microstructures and Internal Stress Measurements by CBED on Creep Deformed Cu and Al," Metall. and Mater. Trans. A, 33A, 2002, pp. 311-317. Rohatgi, A. and Vecchio, K.S., "The variation of dislocation density as a function of the stacking fault energy in shockdeformed FCC materials," Materials Science and Engineering A, A328 pp. 256-266, 2002. Aashish Rohatgi, David J. Harach, Kenneth S. Vecchio, and Kenneth P. Harvey, "Resistance-curve and fracture behavior of TiAl3Ti metallic-intermetallic laminate (MIL) composites," Acta Materialia, Vol. 51 (2003) 2933-2957. Jiang Fengchun, Liu Ruitang, Zhang Xiaoxin, Kenneth Vecchio, Aashish Rohatgi. "Evaluation of dynamic fracture toughness KId by Hopkinson pressure bar loaded instrumented Charpy impact test," Engineering Fracture Mechanics, Vol. 71, no.3, Feb. 2004, pp. 279-287. Elsevier, Hansen MF, Vecchio KS, Parker FT, Spada FE, Berkowitz AE. "Exchange-spring permanent magnet particles produced by spark-erosion", Applied Physics Letters, Vol. 82, no. 10, 10 March 2003, pp. 1574-1576. Fengchun Jiang, Aashish Rohatgi, Kenneth Vecchio, Raghavendra R. Adharapurapu, "Crack Length Calculation for Bend Specimens under Static and Dynamic Loading", Engineering Fracture Mechanics, 71 (2004) pp. 1971-1985. Refereed Journal Article Refereed Journal Article Refereed Journal Article

45.

46.

47.

Refereed Journal Article

48.

Refereed Journal Article

49.

Refereed Journal Article

50.

Refereed Journal Article

51.

Refereed Journal Article

52.

Refereed Journal Article

53.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

54. F. Grignon, D. Benson, K.S. Vecchio, M.A. Meyers, "Explosive Welding of Aluminum to Aluminum: Analysis, Computations, and Experiments," International Journal of Impact Engineering, 30, Elsevier (2004) pp. 1333-1351. Fengchun Jiang, Kenneth Vecchio, Aashish Rohatgi, "Analysis of Modified Split Hopkinson Pressure bar Dynamic Fracture Test Using an Inertia Model," International Journal of Fracture, 126: pp. 143-164, (2004). Raghavendra R. Adharapurapu, Kenneth S. Vecchio, Fengchun Jiang, Aashish Rohatgi, Effects of Ductile Laminate Thickness, Volume Fraction and Orientation on Fatigue-Crack Propagation in Ti-Al3Ti Metal-Intermetallic Laminate (MIL) Composites, Metallurgical and Materials Transactions, (2005) Vol. 36A, pp. 1595 - 1608. Fengchun Jiang, Aashish Rohatgi, Kenneth S. Vecchio* and Justin L. Cheney, "Analysis of the Dynamic Responses for A Pre-cracked Three-point Bend Specimen," International Journal of Fracture, 127: pp. 147-165, (2004) Tiezheng Li, F. Grignon, D. J. Benson, K. S. Vecchio, E. A. Olevsky, Fengchun Jiang, A. Rohatgi, R. B. Schwarz, M. A. Meyers, "Modeling the elastic properties and damage evolution in Ti-Al3Ti metal-intermetallic laminate (MIL) composites," Materials Science and Engineering A, (2004), 374, pp. 10-26. Y. J. Tang, F. T. Parker, H. Harper, A. E. Berkowitz, K. Vecchio, A. Rohatgi, Bao-Min Ma, "Microstructure and exchange coupling in nanocrystalline Nd2(FeCo)14B/a-FeCo particles produced by spark erosion", Applied Physics Letters, (2005), 86, 122507, 1-3. J. Richeton, S. Ahzi, K. S. Vecchio, F. Jiang, R. R. Adharapurapu, Influence Of Temperature And Strain Rate On The Mechanical Behavior Of Three Amorphous Polymers: Characterization And Modeling Of The Compressive Yield Stress, International Journal of Solids and Structures, 43, (2006) pp. 2318 ­ 2335. Douglas Hofmann and Kenneth S. Vecchio, "Submerged Friction Stir Processing (SFSP): An Improved Method for Creating UltraFine-Grained Bulk Materials", Materials Science and Engineering A, (2005), 402, pp. 234-241. Douglas C. Hofmann and Kenneth S. Vecchio, "Thermal History Analysis of Friction Stir Processed and Submerged Friction Stir Processed Aluminum", Materials Science and Engineering A, 465, (2007), 165-175. Refereed Journal Article

55.

Refereed Journal Article

56.

Refereed Journal Article

57.

Refereed Journal Article

58.

Refereed Journal Article

59.

Refereed Journal Article

60.

Refereed Journal Article

61.

Refereed Journal Article

62.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

63. J. Richeton, G. Schlatter, K. S. Vecchio, Y. Rémond, S. Ahzi, "A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates," Polymer, 46, (19), 2005, 8194-8201. Raghavendra R. Adharapurapu, Fengchun Jiang, Kenneth S. Vecchio, and George T. Gray, III, "Response of NiTi Shape Memory Alloy at High Strain Rate: A Systematic Investigation of Temperature Effects on Tension-Compression Asymmetry," Acta Materialia, 54, (2006) 4609-4620. Fengchun Jiang, Aashish Rohatgi, Kenneth S. Vecchio* and Justin L. Cheney, "Response to the Discussion by I.V. Rokach of the paper entitled: `Analysis of the Dynamic Responses for A Precracked Three-point Bend Specimen,' " International Journal of Fracture, 131: pp. 301-307, (2005). Raghavendra R. Adharapurapu, Fengchun Jiang, and Kenneth S. Vecchio, "Dynamic Fracture of Bovine Bone," Materials Science and Engineering C, 26, (2006), pp. 1325-1332. Kenneth S. Vecchio, "Synthetic Multifunctional MetallicIntermetallic Laminate Composites," Journal of Metals, March 2005, pp. 25 ­ 31. Raghavendra R. Adharapurapu, Kenneth S. Vecchio, Aashish Rohatgi, and Fengchun Jiang, "Fracture of Ti-Al3Ti MetallicIntermetallic Laminate Composites: Effects of Lamination on Resistance-Curve Behavior," Metallurgical and Materials Transactions A, (2005), 36A, 3217-3236. Christian Deck and Kenneth S. Vecchio, "Growth of Well-Aligned Carbon Nanotube Structures in Successive Layers," Journal of Physical Chemistry, (2005), 109, 12353-12357. Christian Deck and Kenneth S. Vecchio, "Prediction of Carbon Nanotube Growth Success by the Analysis of Carbon-Catalyst Binary Phase Diagrams," Carbon, (2005) Vol. 44/2 pp. 267-275. Christian Deck, Gregg S. B. McKee, and Kenneth S. Vecchio, "Synthesis Optimization and Characterization of Multi-Walled Carbon Nanotubes," Journal of Electronic Materials, (2006), Vol. 35, No. 2, pp. 211 - 223. Christian Deck and Kenneth S. Vecchio, "Growth Mechanism of Vapor-phase CVD-grown Multi-walled Carbon Nanotubes," Carbon, 43, (2005), 2608-2617. Xing Zhang and Kenneth S. Vecchio, "Creation of Dense Hydroxyapatite (Synthetic Bone) by Hydrothermal Conversion of Seashells," Materials Science and Engineering C, 26, (2006) 1445-1450. Refereed Journal Article

64.

Refereed Journal Article

65.

Refereed Journal Article

66.

Refereed Journal Article Refereed Journal Article

67.

68.

Refereed Journal Article

69.

Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article

70.

71.

72.

73.

KENNETH S. VECCHIO PUBLICATION LIST

74. Lins, J. F. C., Sandim, H. R. Z., Vecchio, K. S., Raabe, D. "An EBSD investigation on deformation-induced shear bands in Ti-bearing IF-steel under controlled shock-loading conditions," Materials Science Forum, v. 495-97, n. 1, p. 393-398, 2005. Albert Yu Min Lin, Marc Andre Meyers, Kenneth S. Vecchio, "Mechanical properties and structure of Strombus gigas, Tridacnagigas, and Haliotis rufescens Seashells: A comparative study", Materials Science and Engineering C 26, (2006), pp. 1380-1389. J. Richeton, S. Ahzi, A Makradi and K.S. Vecchio, "Constitutive modeling of polymer materials at impact loading rates", Journal De Physique IV, 134, (2006) 103-107. Ji-Ho Park, Austin M. Derfus, Ester Segal, Kenneth S. Vecchio, Sangeeta N. Bhatia, Michael J. Sailor, "Local Heating of Discrete Droplets Using Magnetic Porous Silicon-based Photonic Crystals," Journal of the American Chemical Society, 2007, 128, 79387946. Raghavendra R. Adharapurapu and Kenneth S. Vecchio, "Superplasticity in a BioImplant Material: Ni-Rich 55NiTi Alloy", Experimental Mechanics, (2007) 47, (3) pp. 365-371. J. F. C. Lins, H. R. Z. Sandim, H.-J. Kestenbach, D. Raabe, K. S. Vecchio, A Microstructural Investigation of Adiabatic Shear Bands in an Interstitial Free Steel, Materials Science and Engineering A, 2007. 457, pp. 205-218. E.N. Brown, R.B. Willms, G.T. Gray III, P.J. Rae, C.M. Cady, K.S. Vecchio, J.Flowers, and M.Y. Martinez, "Influence of molecular conformation on the constitutive response of polyethylene: a comparison of HDPE, UHMWPE, and PEX", Experimental Mechanics, 2007, 47:381-393. Justin Cheney and Kenneth Vecchio, Prediction of glass-forming compositions using liquidus temperature calculations, Materials Science and Engineering A, (2007) 471, 1-2, pp. 135-143. Kenneth S. Vecchio, Xing Zhang, Jennifer B. Massie, Mark Wang, and Choll Kim, Conversion of Sea Urchin Spines to Mgsubstituted Tricalcium Phosphate for Bone Implants, Acta Biomaterialia, 2007, 3 (5) pp. 785-793. Kenneth S. Vecchio and Fengchun Jiang, "Improved Pulse Shaping to Achieve Constant Strain Rate and Stress Equilibrium in Split-Hopkinson Pressure Bar Testing," Metallurgical and Materials Transactions A, 2007, 38A, 2655-2665. Refereed Journal Article

75.

Refereed Journal Article

76.

Refereed Journal Article

77.

Refereed Journal Article

78.

Refereed Journal Article Refereed Journal Article

79.

80.

Refereed Journal Article

81.

Refereed Journal Article Refereed Journal Article

82.

83.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

84. Fengchun Jiang and Kenneth S. Vecchio, "Experimental Investigation of Dynamic Effects on a Two-bar/Three-Point Bend Fracture Test," Review of Scientific Instruments, 78, 2007, 063903, pp. 1-12. Steven J. Osborne, Wendi S. Sweet, Kenneth S. Vecchio, and Jan B. Talbot, "Electroplating of Copper-Alumina Nanocomposite Films with an Impinging Jet Electrode" Journal of the Electrochemical Society, 2007, 154 (8) D394-D399. J. Richeton,S. Ahzi, K. S. Vecchio, F. C Jiang, A. Makradi, "Modeling and Validation of the Large Deformation Inelastic Response of Amorphous Polymers over a Wide Range of Temperatures and Strain Rates", International Journal of Solids and Structures, 2007, 44, 7938-7954. Fengchun Jiang and Kenneth Vecchio, "Dynamic Effects in Hopkinson Bar Four-Point Bend Fracture" Metallurgical and Materials Transactions A, 2007, 38A, 2896-2906. Kenneth S. Vecchio, Xing Zhang, Jennifer B. Massie, Mark Wang, and Choll Kim, Conversion of bulk seashells to biocompatible hydroxyapatite for bone implants, Acta Biomaterialia, 2007, 3 (6), pp. 910-918. Xing Zhang and Kenneth S. Vecchio, "Hydrothermal Synthesis of Hydroxyapatite Rods," Journal of Crystal Growth, 308, 2007, 133-140. Fengchun Jiang and Kenneth S. Vecchio, "Fracture of Nitinol under Quasi-static and Dynamic Loading, " Metallurgical and Materials Transactions A, 2007, 38A, 2907-2915. Austin M. Derfus, Geoffrey von Maltzahn, Todd J. Harris, Tasmia Duza, Kenneth S. Vecchio, Erkki Ruoslahti, and Sangeeta N. Bhatia, "Remotely Triggered Release from Magnetic Nanoparticles," Advanced Materials, 2007, 19, 3932-3936. Refereed Journal Article

85.

Refereed Journal Article

86.

Refereed Journal Article

87.

Refereed Journal Article Refereed Journal Article Refereed Journal Article Refereed Journal Article

88.

89.

90.

91.

Refereed Journal Article

92.

Gregg S. B. McKee and Kenneth S. Vecchio, "Thermogravimetric Analysis of Synthesis Variation Effects on CVD Generated Multiwalled Carbon Nanotubes," Journal of Physical Chemistry B, 2006, 110, 1179-1186.

Refereed Journal Article

93.

Christian P. Deck, Jason Flowers, Gregg S. B. McKee, and Kenneth S. Vecchio, "Mechanical behavior of ultralong multiwalled carbon nanotube mats," Jour. of Applied Physics, 2007, 101, 023512-1.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

94. Tiezheng Li, Fengchun Jiang, Eugene A. Olevsky, Kenneth S. Vecchio, Marc A. Meyers, "Damage evolution in Ti6Al4V­Al3Ti metal-intermetallic laminate composites," Materials Science and Engineering A, 2007, 443, 1-15. L. Cai, V. F. Nesterenko, K. S. Vecchio, F. Jiang, E.B. Herbold, D. Benson, J. W. Addiss, S. M. Walley, and W. G. Proud, "The influence of metallic particle size on the mechanical properties of polytetraflouroethylene-Al-W powder composites" Applied Physics Letters, (2008), 92, 031903-1-3. Hesham E. Khalifa, Justin L. Cheney, and Kenneth S. Vecchio, "Effect of Mo-Fe Substitution on Glass Forming Ability, Thermal Stability, and Hardness of Fe-C-B-Mo-Cr-W Bulk Amorphous Alloys" Materials Science and Engineering A, 2008, 490, pp. 221228. Justin Cheney and Kenneth S. Vecchio, "Evaluation of Glass Forming Ability in Metals Using Multi-Modeling Techniques", Journal of Alloys and Compounds, 2009, 471, 222-240. Justin Cheney and Kenneth S. Vecchio, "Development of Quaternary Fe-based Bulk Metallic Glasses", Materials Science and Engineering-A, 492, (2008), 230-235. Kulin, R. M., Jiang, F., Vecchio, K. S., "Aging and loading rate effects on the mechanical behavior of equine bone," Journal of Metals, 2008, 60 (6) 39-44. Xing Zhang, Fengchun Jiang, Todd Groth, and Kenneth S. Vecchio, "Preparation, Characterization and Mechanical Performance of Dense -TCP Ceramics with/without Magnesium Substitution", Journal of Materials Science: Materials in Medicine, 2008, 19:3063-3070. G.S.B. McKee, J. S. Flowers and K. S. Vecchio, `On Length and the Oxidation Kinetics of CVD-Generated Multi-walled Carbon Nanotubes', Journal of Physical Chemistry-C, 2008, 112, 1010810113. C. Ni, C. Deck, K. S. Vecchio, and P. R. Bandaru, "Optical Determination of the Flexural Rigidity of Carbon Nanotube Ensembles," Applied Physics Letters, 92, 173106 (2008) E.B. Herbold, V.F. Nesterenko, D.J. Benson, K.S. Vecchio, F. Jiang, J.W. Addiss, S.M. Walley, W.G. Proud, "Particle Size Effect on Static and Dynamic Strength and Failure in Granular Composite Polytetraflouroethylene-Al-W", Applied Physics Letters, 104, 103903, (2008). Refereed Journal Article

95.

Refereed Journal Article

96.

Refereed Journal Article

97.

Refereed Journal Article Refereed Journal Article Refereed Journal Article

98

99.

100.

Refereed Journal Article

101.

Refereed Journal Article Refereed Journal Article

102.

103.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

104. Hesham E. Khalifa and Kenneth S. Vecchio, "Devitrification and Cooling Rate Effects on Microstructure and Mechanical Properties in Fe57C9B11Mo12Cr8W3 Bulk Metallic Glass", Advanced Engineering Materials, 2008, 10:11, 1056-1063. Hesham E. Khalifa, Justin L. Cheney, and Kenneth S. Vecchio, "Effect of Mo-Fe Substitution on Glass Forming Ability and Thermal Stability of Fe-C-B-Mo-Cr-W Bulk Amorphous Alloys" Journal of Non-Crystalline Solids, 354, (2008) 4550-4555. Justin Cheney, Hesham Khalifa, and Kenneth Vecchio, "Modeling the amorphous forming ability of Ti-based alloys with wide supercooled liquid regions and high hardness" Materials Science and Engineering A, 506 (1-2), 2009, 94-100. Gregg McKee, Christian Deck, and Kenneth Vecchio, "Dimensional Control of Multi-walled Carbon Nanotubes in Floating-Catalyst CVD Synthesis," Carbon, 47, 2009, 2085-2094. Fengchun Jiang and Kenneth S. Vecchio, "Hopkinson Bar Loaded Fracture Experimental Technique: A Critical Review of Dynamic Fracture Toughness Tests," Applied Mechanics Reviews, Vol. 62, November 2009, 060802-1 to 060802-39. Xing Zhang, Tsukasa Takahashi, and Kenneth S. Vecchio, "Development of Bioresorbable Mg-substituted Tricalcium Phosphate Scaffolds for Bone Tissue Engineering," Materials Science and Engineering-C, 29, (2009), 2003-2010. Lisa M. Dougherty, Ellen K. Cerreta, George T. Gray III, Carl P. Trujillo, Mike F. Lopez, Kenneth S. Vecchio, and Greg J. Kusinski, "Mechanical Behavior and Microstructural Development of Low Carbon Steel and Microcomposite Steel Reinforcement Bars Deformed under Quasi-static and Dynamic Shear," Metallurgical and Materials Transactions A, 40 (8) (2009), 1835. Jefferson Fabricio Cardoso Lins, Hugo Ricardo Zschommler Sandim, and Kenneth S. Vecchio, Microstructural aspects of failure of an IF steel deformed by dynamic compression at 196ºC, Metallurgia & Materiais, R. Esc. Minas, Ouro Preto, 62(2): 167-173, abr. jun. 2009 Hesham E. Khalifa and Kenneth S. Vecchio, "High Strength (Ti58Ni28Cu8Si4Sn2)100-xMox Nanoeutectic Matrix--Ti Dendrite, BMG-Derived Composites with Enhanced Plasticity and Corrosion Resistance", Advanced Engineering Materials, 2009, 11:11, pp. 885-891. Hesham E. Khalifa, Kenneth S. Vecchio, `Thermal Stability and crystallization phenomena of low cost Ti-based bulk metallic glass' Journal of Non-Crystalline Solids, 2009, in press Refereed Journal Article

105.

Refereed Journal Article

106.

Refereed Journal Article Refereed Journal Article Refereed Journal Article

107.

108.

109.

Refereed Journal Article

110.

Refereed Journal Article

110.

Refereed Journal Article

111.

Refereed Journal Article

112.

Refereed Journal Article

KENNETH S. VECCHIO PUBLICATION LIST

113. C. P. Deck, C. Ni, K. S. Vecchio, and P. R. Bandaru, `The response of carbon nanotube ensembles to fluid flow: Applications to mechanical properties measurement and diagnostics', Journal of Applied Physics, 106, 074304-1:6 (2009). Douglas C. Hofmann, Henry Kozachkov, Hesham E. Khalifa, Joseph P. Schramm, Marios D. Demetriou, Kenneth S. Vecchio, and William L. Johnson, `Semi-Solid Induction Forging of Metallic Glass Matrix Composites' Journal of Metals, 61, No. 12, pp. 1117. Robb M. Kulin, Po-Yu Chen, Fengchun Jiang, Joanna McKittrick, and Kenneth Vecchio, `Dynamic Fracture Resilience of Elk Antler: Biomimetic Inspiration for Improved Crashworthiness' Journal of Metals, (2010) 62, No. 1, pp. 41-46. Fengchun Jiang, Robb M. Kulin, and Kenneth S. Vecchio, `Use of Brazilian Disk Test to Determine Properties of MetallicIntermetallic Laminate Composites', Journal of Metals, (2010) 62, No. 1, pp. 34-39. Refereed Journal Article

114.

Refereed Journal Article

115.

Refereed Journal Article

116.

Refereed Journal Article

II.

Books and Book Chapters Williams, D. B., and K. S. Vecchio, "Electron Diffraction Images" in Images of Materials, D.B. Williams, R. Gronsky, and A.R. Pelton, eds., Oxford University Press, York, 1991, pp. 174-220. Refereed Conference Proceedings Vecchio, K. S., and A. R. Marder, "An Analytical Structure Determination of a Saugus Pig," Microbeam Analysis 1984, Proceedings of The Microbeam Analysis Society Annual Meeting, (Conference Proceedings, Bethlehem, PA, July 1984) A. D. Romig, Jr. and J. I. Goldstein, eds., 1984, pp. 247-248. Vecchio, K. S., "The Effect of Coherent Bremsstrahlung Peaks in AEM Studies of Grain Boundary Segregation," Proceedings of 43rd Annual Meeting of EMSA, (Louisville, KY), 1985, G. W. Bailey, ed., San Francisco Press, San Francisco, CA, pp. 248-249. K. S. Vecchio and D. B. Williams, "CBED and Microanalysis Evidence for the Non-Icosahedral T2 (Al6Li3Cu)", Proceedings of Microbeam Analysis Society Annual Meeting 1987, (Kona, HI, July 1987), San Francisco Press, San Francisco, CA, pp. 129-131. Vecchio, K. S., and D. B. Williams, "Microtwinning Evidence For The Apparent Five-Fold Symmetry In T2 (Al6Li3Cu) Phase," Proceedings of the 45th Ann. Meeting of EMSA, (Baltimore, MD, August, 1987), ed. G. W. Bailey, San Francisco Press, San Francisco, CA, pp. 24-25.

1.

Book Chapter

III.

1.

Refereed Conference Proceedings

2.

Refereed Conference Proceedings

3.

Refereed Conference Proceedings

4.

Refereed Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

Vecchio, K. S., "Experimental Limitations of CBED HOLZ Line Analysis for Compositional Measurements", Proceedings of the 24th Meeting of the Microbeam Analysis Society, (Asheville, NC, July 1989), P. E. Russell, ed., San Francisco Press, 1989, pp.477479. Vecchio, K. S., and J. A. Hunt, "A Computer-Control Program for TEM In-Situ Fatigue Experiments", Proceedings of the 47th Annual Meeting of the Electron Microscopy Society of America, (San Antonio, TX, August 1989), pp. 620-621. Vecchio, K. S., "In-Situ Fatigue of Al-Li-X Alloys", Proceedings of the 47th Annual Meeting of the Electron Microscopy Society of America, (San Antonio, TX, August 1989), pp. 624-625. Klimowicz, T., and K. S. Vecchio, "The Influence of Aging Condition on the Fracture Toughness of Alumina-Reinforced Aluminum Composites", Fundamental Relations Between Microstructure and Mechanical Properties of Metal-Matrix Composites, eds. P. K. Liaw and M. N. Gungor, Warrendale, PA, The Metallurgical Society of AIME, 1990 pp. 255-267. Vecchio, Kenneth S., "In-Situ Observations of Microvoid Coalescence: Stacking Fault Energy Effects", Proceedings of the XIIth International Congress for Electron Microscopy, eds. L.D. Peachey and D.B. Williams, San Francisco Press, 1990, 4, pp. 520-521. Vecchio, Kenneth S., "Thermally-Induced Dislocation Generation in Al/Al2O3 Metal-Matrix Composites," Proceedings of the 49th Annual Meeting of EMSA, San Francisco Press Inc., 1991, pp. 588-589. Sharma, Vinod, Kenneth S. Vecchio, and S. Nemat-Nasser, "Damage Evolution in Silicon Nitride Under Repeated Dynamic Loading," Proceedings of the 49th Annual Meeting of EMSA, San Francisco Press Inc., 1991, pp. 934-935. Altman, B. S., S. Nemat-Nasser, K. S. Vecchio, and J. Isaacs, "Homogeneous Deformation of a Particulate Reinforced MetalMatrix Composite," Proceedings of the American Physical Society Conference on Shock Compression of Condensed Matter 1991, S.C. Schmidt, R. D. Dick, J. W. Forbes, D. G. Tasker, eds., Elsevier Science Publishers B.V., 1992, pp. 543-546. Meyers, M. A., L. H. Yu, and K. S. Vecchio, and, "Shock Synthesis of Silicides," Proceedings of the American Physical Society Conference on Shock Compression of Condensed Matter 1991, S.C. Schmidt, R. D. Dick, J. W. Forbes, D. G. Tasker, eds, Elsevier Science Publishers B.V., 1992, pp. 629-632. Refereed Conference Proceedings

5.

6.

Refereed Conference Proceedings Refereed Conference Proceedings

7.

8.

Refereed Conference Proceedings

9.

Refereed Conference Proceedings

10.

Refereed Conference Proceedings

11.

Refereed Conference Proceedings

12.

Refereed Conference Proceedings

13.

Refereed Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

14. Vecchio, K. S., U. Andrade, M. A. Meyers, and L. W. Meyer, "Microstructural Evolution in High Strain, High-Strain Rate Deformation," Proceedings of the American Physical Society Conference on Shock Compression of Condensed Matter 1991, S.C. Schmidt, R. D. Dick, J. W. Forbes, D. G. Tasker, eds, Elsevier Science Publishers B.V., 1992, pp. 527-530. Meyers, M. A., L.W. Meyer, J. Beatty, U. Andrade, K. S. Vecchio, and A. Chokshi, "High-Strain, High-Strain Rate Deformation of Copper", Shock-Wave and High-Strain-Rate Phenomena in Materials, M.A. Meyers, L.E. Murr, and K.P. Staudhammer, eds., M. Dekker, NY, 1992, pp. 529-542. Li-Hsing Yu, Marc A. Meyers, and Kenneth S. Vecchio, "Shock Synthesis of Silicides: Microstructures and Mechanisms," Proceedings of the International Symposium on Intense Dynamic Loading and Its Effects, Chengdu, China, Sichuan University Press, 1992, pp. 741-748. Hong, S. I., G. T. Gray, III, and K. S. Vecchio, "Dynamic Mechanical Response and Microstructural Evolution of an Al2O3 Reinforced Aluminum-Matrix Composite," Proceedings of the 1991 TMS Fall Meeting October 1991, Cincinnati, OH, TMS-AIME, 1992, 4 pages. Raja Subramanian and Kenneth S. Vecchio, "Dislocation Structures and Twinning in Tungsten <110> Single Crystals," Proc. 50th Annual Meeting of the Electron Microscopy Society of America, San Francisco Press, 1992, pp. 40-41. Raja Subramanian and Kenneth S. Vecchio, "Structure of Stacking Faults in Pyrite Using TEM Techniques," Proc. 50th Annual Meeting of the Electron Microscopy Society of America, San Francisco Press, 1992, pp. 358-359. S. I. Hong, G. T. Gray, III, and K. S. Vecchio, "Microchemistry of Aluminum Metal Matrix Composites", Proceedings of the 1993 Annual Meeting of the Microbeam Analysis Society, VCH Publishers, Inc., 1993, pp. S142-S143. Bimal Kad, Kenneth S. Vecchio, and Robert J. Asaro, "Planar Faults in Plasma Spray Deposited MoSi2", Proceedings of the 1993 Annual Meeting of the Microbeam Analysis Society, VCH Publishers, Inc., 1993, pp. S148-S149. Bimal Kad, Kenneth S. Vecchio, Hamish L. Fraser, and Peter M. Hazeldine, "Dilatational Versus Shear Effects in Convergent Beam Electron Diffraction Techniques Applied To TiAl-Based Lamellar Composites", Proceedings of the 1993 Annual Meeting of the Microbeam Analysis Society, VCH Publishers, Inc., 1993, pp. S224-S225. Refereed Conference Proceedings

15.

Refereed Conference Proceedings

16.

Refereed Conference Proceedings

17.

Refereed Conference Proceedings

18.

Refereed Conference Proceedings

19.

Refereed Conference Proceedings

20.

Refereed Conference Proceedings

21.

Refereed Conference Proceedings

22.

Refereed Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

23. Kenneth S. Vecchio, and George T. Gray, III, "Effects of Shock Loading on a Solid-Solution Strengthened Superalloy," (HighPressure Science and Technology-1993), Proceedings of the Joint AIRAPT/APS Conference, June 1993, S. C. Schmidt, J. W. Shaner, G. A. Samara, and M. Ross, eds., American Physical Society, 1994, pp. 1213-1216. Kenneth S. Vecchio, "Electron Microscopy of Shock-Synthesized Silicides and Aluminides," (High-Pressure Science and Technology-1993), Proceedings of the Joint AIRAPT/APS Conference, June 1993, S. C. Schmidt, J. W. Shaner, G. A. Samara, and M. Ross, eds, American Physical Society, 1994, pp. 12211224. L. H. Yu, W. J. Nellis, M. A. Meyers, and K. S. Vecchio, "Shock Synthesis of Niobium Silicides," (High-Pressure Science and Technology-1993), Proceedings of the Joint AIRAPT/APS Conference, June 1993, S. C. Schmidt, J. W. Shaner, G. A. Samara, and M. Ross, eds., American Physical Society, 1994, pp. 12911294. A. J. Strutt, K. S. Vecchio, L.-H. Yu, M. A. Meyers, and R. A. Graham, "Shock Synthesis of Nickel-Aluminides," High-Pressure Science and Technology-1993, Proceedings of the Joint AIRAPT/APS Conference, June 1993, S. C. Schmidt, J. W. Shaner, G. A. Samara, and M. Ross, eds, American Physical Society, 1994, pp. 1259-1262. Bimal Kad, Kenneth Vecchio, and Robert Asaro, "Defect Structures and Planar Faults in Plasma Spray-Deposited MoSi2," Materials Research Society Symposium Proceedings, 1993, 288, pp. 1123-1128. B. K. Kad, K. S. Vecchio, B. P. Bewlay, and R. J. Asaro, "C11b->C40 Transformation-Induced 1/4<111> Faults in MoSi2," Materials Research Society Symposium Proceedings, Materials Research Society, eds. C. L. Briant, J. J. Petrovic, B. P. Bewlay, A. K. Vasudevan, H. A. Lipsitt, 1994, 322, pp. 49-55. A. J. Strutt, M. A. Meyers, and K. S. Vecchio, "Analytical Electron Microscopy of Shock-Synthesized Niobium-Silicide Composites," Proc. 52nd Annual Meeting of the Microscopy Society of America, G. W. Bailey and A. J. Garratt-Reed, eds., San Francisco Press, Inc. 1994, pp. 704-705. Roa Wen Chen and Kenneth S. Vecchio, "Microstructural Characterization Of Shear Band Formation In Al-Li Alloys" Journal de Physique IV, Colloque C8, supplément au Journal de Physique III, 4, September 1994, pp. 459-464. Refereed Conference Proceedings

24.

Refereed Conference Proceedings

25.

Refereed Conference Proceedings

26.

Refereed Conference Proceedings

26.

Refereed Conference Proceedings

27.

Refereed Conference Proceedings

28.

Refereed Conference Proceedings

29.

Refereed Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

30. Kenneth S. Vecchio and George T. Gray, III, "Shock-Loading Response Of 6061-T6 Aluminum-Alumina Metal-Matrix Composites," Journal de Physique IV, Colloque C8, supplément au Journal de Physique III, 4, September 1994, pp. 231-236. Kenneth S. Vecchio and Aniruddha M. Thakur, "Effects Of Shock Loading On Cobalt-Based Solid-Solution Strengthened Superalloys," Journal de Physique IV, Colloque C8, supplément au Journal de Physique III, 4, September 1994, pp. 367-372. Kenneth S. Vecchio, "High Strain, High-Strain-Rate Deformation of Tantalum and Tantalum-Tungsten Alloys," Journal de Physique IV, Colloque C8, supplément au Journal de Physique III, 4, September 1994, pp. 301-306. U. Andrade, M. A. Meyers, A. H. Chokshi, and K. S. Vecchio, "Dynamic Recrystallization and Grain Size Effects in ShockHardened Copper," Journal de Physique IV, Colloque C8, supplément au Journal de Physique III, 4, September 1994, pp. 361-366. Joy A. Hines and Kenneth S. Vecchio, "Dynamic Recrystallization in Adiabatic Shear Bands in Shock-Loaded Copper," Proceeding of the 1995 International Conference on Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena (Explomet `95), Elsevier, 1995, pp. 421-428. Andrew J. Strutt, Kenneth S. Vecchio, Sherri R. Bingert, and George T. Gray, III, "Effects of Interstitials on the Mechanical Behavior of P/M Tantulum," Proceedings of the International Conference on Tungsten and Refractory Metals, A. Bose and R. J. Dowding, eds, Metal Powder Industries Federation, 1995, Princeton, N.J., pp. 39-46. S. E. Schoenfeld, S. Ahzi, and K. S. Vecchio, "Modeling Dynamic Behavior and Texture Evolution in Pure Ta," Tantalum, The Metallurgical Society of AIME, E. Chen, A. Crowson, E. Lavernia, W. Ebihara, et al., eds., TMS, (1996), pp. 249-255. Joy A. Hines and Kenneth S. Vecchio, "A Kinetically Favorable Recrystallization Mechanism for Adiabatic Shear Bands," Proceedings of the ReX'96: The Third International Conference on Recrystallization and Related Phenomena, Terry R. McNelley, ed., 1997, Monterey Institute of Advanced Studies, Monterey, CA, pp. 179-186. Refereed Conference Proceedings

31.

Refereed Conference Proceedings

32.

Refereed Conference Proceedings

33.

Refereed Conference Proceedings

34.

Refereed Conference Proceedings

35.

Refereed Conference Proceedings

36.

Refereed Conference Proceedings

37.

Refereed Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

A. R. Boccaccini, A. J. Strutt, D. H. Pearce, and K. S. Vecchio, "Thermal Shock and Thermal Cycling Behavior of Fiber Reinforced Glass Matrix Composites," 29th International SAMPE Technical Conference, Vol. 29, Composites For the Real World, John E. Green, Scott W. Beckwith, and A. Brent Strong, eds., Society for the Advancement of Material and Process Engineering, 1997, pp. 207-219. M. A. Meyers, V. F. Nesterenko, K. S. Vecchio, and S. S. Batsonov, "Shock and Shear Induced Chemical Reactions in Mo-Si, Nb-Si, and Ti-Si Systems," Molybdenum and Molybdenum Alloys, eds. A. Crowson, E. S. Chen, J. A. Shields, and P. R. Subramanian, 1998 TMS Annual Meeting, San Antonio, TX, pp. 221-239. T.A. Hayes, R.S. Rosen, M.E. Kassner and K.S. Vecchio, "Analysis of Dry Storage Temperature Limits for Zircaloy-Clad Spent Nuclear Fuel", Scientific Basis for Nuclear Fuel Management XXIII, MRS Symposium 608, R.W. Smith and D.W. Shoesmith eds, 2000, pp. 23-28. A. Rohatgi, K.S. Vecchio, and George T. Gray III, "A systematic study of the role of stacking fault energy (SFE) on shockhardening in Cu and Cu-Al alloys", in Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, eds, K. P. Staudhammer, L.E. Murr, and M.A. Meyers, (2001) pp. 25-32. George T. Gray III, K.S. Vecchio, and M. F. Lopez, "Influence of microstructural anisotropy on the quasi-static and dynamic fracture of 1080 eutectoid steel", in Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, K. P. Staudhammer, L.E. Murr, and M.A. Meyers, eds, (2001) pp. 157-163. A. Rohatgi, A.J. Strutt, and K.S. Vecchio, "Modeling solid-particle erosion in high temperature superalloys", in Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, K. P. Staudhammer, L.E. Murr, and M.A. Meyers, eds, (2001) pp. 539-546. Kassner, M.E.; Perez-Prado, T.; Vecchio, K.S., "Cyclic deformation dislocation microstructures", in Advanced Materials for the 21st Century: 1999 Julia R. Weertman Symposium. Proceedings of Symposium. Held during the 1999 TMS Fall Meeting, Cincinnati, OH, Chung, Y.-W.; Dunand, D.C.; Liaw, P.K.; Olson, G.B., eds., Warrendale, PA, USA: TMS - Miner. Metals & Mater. Soc, 1999, p. 3-13. Refereed Conference Proceedings

38.

39.

Refereed Conference Proceedings

40.

Refereed Conference Proceedings

41.

Refereed Conference Proceedings

42.

Refereed Conference Proceedings

43.

Refereed Conference Proceedings

44.

Refereed Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

45. A. Rohatgi, J.B. Kosmatka, K.S. Vecchio, K.P. Harvey, P. Nguyen, and D.J. Harach "Development of Multifunctional MetallicIntermetallic Laminate (MIL) Composites with Particulate-based Damping" Proceedings of the 16th Annual Technical Conference of the American Society for Composites, September 9-12, 2001, Virginia Tech. Gray GT III, Bourne NK, Millett JCF, Lopez MF, Vecchio KS. Influence of microstructural anisotropy on the spallation of 1080 eutectoid steel, American Institute of Physics Conference Proceedings no. 620, pt.1, 2002, pp.479-482. Justin Cheney and Kenneth Vecchio, Production of high iron content amorphous steels without the use of rare earth elements", Bulk Metallic Glasses, eds. P.K. Liaw and R. A. Buchanan, TMS (The Minerals, Metals, and Materials Society) 2006, pp. 135-143. Refereed Conference Proceedings

46.

Refereed Conference Proceedings

47.

Refereed Conference Proceedings

48.

Peter Lin, Virgil Provenzano, Robert Heard, Herbert Miller, Gino Palumbo, Kenneth Vecchio, Fengchun Jiang, Tim Gabb, and Jack Telesman, "Grain Boundary Engineering of Superalloys for Aerospace Engine Applications" TMS Meeting, March 2008

Refereed Conference Proceedings

IV. 1.

Patents Patent # 6,475,427 "Golf club with multiple material weighting member" Patent # 6,406,382 "Golf club with multiple material weighting member" Patent # 6,357,332 "Process for making metallic intermetallic composite laminate material and materials so produced especially for use in lightweight armor" Patent # 6,277,326 "Process for liquid-phase sintering of a multicomponent material" Patent #7,188,559 B1 "Fabrication of Interleaved Metallic and Intermetallic Composite Laminate Materials" Patent

2.

Patent

3.

Patent

4.

Patent

5.

Patent

6.

Patent #7,621,435 "Design and Fabrication of Structural Armor"

Patent

B. I.

OTHER WORK Other Conference Proceedings

KENNETH S. VECCHIO PUBLICATION LIST

1. Roa Wen Chen and Kenneth S. Vecchio, "' (Al3Li) Dissolution As A Thermal Probe in Shear Banding Studies", Proceedings of the Microscopy Society of America 51st Annual Meeting, San Francisco Press, 1993, pp. 1178-1179. Kenneth S. Vecchio, "Electron Microscopy Study of Shock Synthesis of Silicides," Proceedings of the Microscopy Society of America 51st Annual Meeting, San Francisco Press, 1993, pp. 1162-1163. A. J. Strutt, M. T. Simnad, E. Lavernia, and K. S. Vecchio, "Analytical Electron Microscopy of a Ag-Y-Ba-Cu Superconductor Precursor Material," Proceedings of the Microscopy Society of America 51st Annual Meeting, San Francisco Press, 1993, pp. 1192-1193. Levin, B.F.; Vecchio, K.S.; DuPont, J.N.; Marder, A.R. "Solid particle erosion resistance and high strain rate deformation behavior of Inconel-625 alloy" (Edited by: Loria, E.A.). Superalloys 718, 625, 706 and Various Derivatives. (Proceedings of the International Symposium, USA, 15-18 June 1997.) Warrendale, PA, USA: TMS, 1997, pp. 479-88. G.T. Gray III, M.F. Lopez, N.K. Bourne, J.C.F. Millett, and K.S. Vecchio "Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel," Shock Compression of Condensed Matter-2001, M.D. Furnish, N. Thadhani, and Y. Horie, eds., AIP Conf. Proc., American Institute of Physics Press, Woodbury, York (2002) . Abstracts of Non-refereed Conference Proceedings Other Presentations/Works Meyers, M. A., K. S. Vecchio, W. Froehlich, and S. Nemat-Nasser, MATERIALS, UCSD, Brochure on the Graduate Materials Science Program at UCSD, Compiled by Kenneth S. Vecchio, UCSD Publications Office, University of California, San Diego, LaJolla, CA, 1989, 64 pp. Kenneth S. Vecchio, " Electron Microscopy, Analytical" The Encyclopedia of Advanced Materials, D. Bloor, M. C. Flemings, R. J. Brook, and S. Mahajan, eds., Pergamon Press, Oxford, U.K., 1994, pp. 730-737. Kenneth S. Vecchio, "Transmission Electron Microscopy," The Encyclopedia of Advanced Materials, D. Bloor, M. C. Flemings, R. J. Brook, and S. Mahajan, eds, Pergamon Press, Oxford, U.K., 1994, pp. 2893-2901. Conference Proceeding

2.

Conference Proceeding

3.

Conference Proceeding

4.

Conference Proceeding

5.

Conference Proceeding

II. III. 1.

UCSD Promotional Brochure

2.

Contributed Encyclopedia Article

3.

Contributed Encyclopedia Article

KENNETH S. VECCHIO PUBLICATION LIST

4. Kenneth S. Vecchio and Andrew J. Strutt, "Scanning Transmission Electron Microscopy," The Encyclopedia of Advanced Materials, D. Bloor, M. C. Flemings, R. J. Brook, and S. Mahajan, eds., Pergamon Press, Oxford, U.K., 1994, pp. 2336-2344. Kenneth S. Vecchio, "Convergent-beam Electron Diffraction," The Encyclopedia of Advanced Materials, D. Bloor, M. C. Flemings, R. J. Brook, and S. Mahajan, eds, Pergamon Press, Oxford, U.K., 1994, pp. 495-502. Kenneth S. Vecchio and Andrew J. Strutt, "X-ray Microanalysis: Qualitative and Quantitative," The Encyclopedia of Advanced Materials, D. Bloor, M. C. Flemings, R. J. Brook, and S. Mahajan, eds., Pergamon Press, Oxford, U.K., 1994, pp. 2942-2950. Kenneth S. Vecchio, "Electron Microscopy, Analytical," The Encyclopedia of Materials: Science and Technology, K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, and S. Mahajan, eds., Elsevier Science, Oxford (2001), pp. 304-313. Contributed Encyclopedia Article

5.

Contributed Encyclopedia Article

6.

Contributed Encyclopedia Article

7.

Contributed Encyclopedia Article

Information

Vecchio Complete CV 3-10

22 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

376161