Read 4311_ESD_catalog.pdf text version

ESD CONTROL

The Global Partner for Complete Packaging Solutions

Contents

1. ESD BASICS What is ESD? ESD Basics ESD Control Program Example of an EPA Definitions ESD Training and Instruction 4 5 6 7 8 9 3. GROUNDING PRODUCTS Wrist Bands Grounding Cords Common Point Grounds Adapt-A-Snaps EBP Europlug EBP Bar Shoe Grounders Disposable Heel Straps Conductive Disposable Shoe Covers ESD Shoes Groundcheck Grounding Tester Groundcheck Backplate Groundcheck Footplate Groundcheck Calibration Monitor Constant Wrist Strap Monitor 24 25 25 26 26 26 27 28 28 28 29 29 30 31 31 PCB Boxes Cortronic Shielding Corrugated Carton Plastic Conductive Containers Conductive Corrugated PP Vacuum Thermoformed Trays Conductive Pallets ESD Airpad Membrane Boxes Cleanroom Packaging 43 43 47 48 48 49 49 50 51

2. PRODUCTS FOR THE EPA Dissipative Work Surface Mats Mat & Table Top Cleaner Dissipative Floor Mats Floor Finish System Field Service Kit Tapes EPA Warning Signs ESD Safe Chairs ESD Safe Furniture ESD Clothing ESD Gloves Dissipative Binders Dissipative Ordercover Dissipative Clipboard Dissipative Document Holders Conductive Waste Bins Low Charging Waste Bags Staticide Heavy Duty 12 13 13 14 14 15 16 18 18 19 19 20 20 20 20 21 21 21

5. IONIZATION EQUIPMENT Aerostat PC Aerostat XC Aerostat Guardian Top Gun 54 54 55 55

4. ESD PROTECTIVE PACKAGING Static Shielding Bags Dry Shielding Bags Desiccant Bags Humidity Indicator Cards VCI for ESD applications Dissipative Pink PE Permanent Dissipative PE ESD Bubble Wrap Dissipative PE Foam Conductive PE Foam Dissipative PU Foam Component Boxes 34 35 36 36 37 38 39 40 40 41 41 42

6. TEST AND MEASURING EQUIPMENT Static Locator Static Field Meter Surface Resistance Meter Surface Resistance Kit Concentric Ring Probe Ionizer Performance Analyzer 58 58 59 59 60 60

3

ESD BASICS

1

ESD BASIC

What is ESD?

ESD ­ ElectroStatic Discharge is a spark, a micro-lightning bolt which passes from one charged conductive surface to another conductive surface. This incredible rapid transfer of what had heretofore been a static (unmoving) charge can cause fires, explosions, EMI, RF, heat, light and even sound waves. It is this unseen, unfelt, unheard micro lightning spark that must be controlled.

4

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

ESD BASICS

1

ESD BASICS

ESD Basics

ESD Control Program Example of an EPA Definitions ESD Training and Instruction 6 7 8 9

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

5

ESD BASICS

1

ESD BASIC

ESD Control Program

An ESD Control Program includes the following points. By strictly complying with those points ESD damage can be minimized. ­ ESD training and instruction. ­ Handle ESD sensitive (ESDS) products only in an ESD Protected Area (EPA). ­ Keep all conductors (including persons) on the same potential. ­ Remove all "common" (charge generating) plastics from the EPA. ­ Neutralize electrostatic charges on essential insulative materials by using ionization. ­ Surround all ESDS with ESD safe packaging materials, except when they are being actively worked on. Monitoring an ESD Control Program Once an ESD Control Program has been implemented, it is necessary to routinely monitor the program to make sure every element is working properly. A comprehensive ESD Control Program should include the following equipment: Static Locator or Static Field Meter: To demonstrate electrostatic charges or to determine whether electrostatic charges are present. Wrist band, footwear/shoe grounder tester: For testing wrist bands, grounding cords, footwear or shoe grounders. Surface Reistance Meter: For testing worksurfaces, floor mats and flooring. Charged Plate Monitor: For testing ionization equipment. The required frequency for checking the different ESD provisions is dependent of factors such as usage, items durability as well as the impact on the ESD Control Program and consequently on ESDS.

Product EPA Packaging Wrist Bands Shoe Grounders Shoes Worksurfaces Field Service Kit Flooring Chairs Ionizers Clothing Equipment Calibration ESD Training Equipment Visual Visual Groundcheck Grounding Tester Groundcheck Grounding Tester Groundcheck Grounding Tester Surface Resistivity Meter Surface Resistivity Meter Surface Resistivity Meter Chaircheck Ionizer Performance Analyzer Surface Resistivity Meter Testing Daily Daily Daily Daily Daily Quarterly Quarterly Quarterly Quarterly Quarterly Semi-annually

Checklist for ESD Safe Handling ESD evaluation

­ Assign an ESD coordinator. ­ Which components are ESDS (ElectroStatic Discharge Sensitive)? ­ Where are ESDS products handled? ­ Which processes can cause ESD? ­ Where do ESDS products go to after leaving the plant? ­ Quantify damage and loss due to ESD.

ESD protection

Optimal ESD protection can be achieved by a combination of: ­ ESD training and instruction; ­ ESD protective products; ­ Frequent monitoring of the above.

ESD training and instruction

­ Explain why ESD protection is necessary. ­ Demonstrate the use of various ESD products. ­ Adjust precautions to the practical working circumstances. ­ Explain that ESD protection can generate a generous return on investment.

EPA (ESD Protected Area)

­ ESD safe worksurface. ­ Wrist band with grounding cord. ­ Identification EPA (caution sign). Additional/optional: ­ ESD safe floor, in combination with shoe grounders or ESD safe footwear. ­ ESD safe chairs. ­ ESD safe binders and document holders. ­ ESD safe garments (gloves, coats, headwear). ­ ESD safe tooling. ­ ESD safe waste bins. ­ Worksurface ionizers.

ESD protective packaging

­ Checking of packaging of incoming goods. ­ Packaging requirements of the product: - product sensitivity - electrical properties - mechanical properties - water vapour transmission rate (WVTR) - single use or re-usability

Calibration Monitors Annually ESD Coordinator/ESD Consultant Annually/ Bi-annually

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S | W W W. N E FA B . C O M

6

ESD BASICS

1

ESD BASICS

Example of an EPA

1. Groundable wheels 2. Groundable surface 3. Wrist band and footwear tester 4. Footwear testing plate 5. Wrist band and grounding cord 6. Grounding cord 7. Ground Connecting Point 8. Earth Bonding Point (EBP) 9. Groundable point of trolley 10. Toe and heel strap (footwear) 11. Ionizer 12. Dissipative surfaces 13. Chair with groundable feet and pads 14. ESD Floor 15. ESD Clothing 16. Shelving with grounded surfaces 17. Groundable racking 18. EPA sign 19. Machine

16 18 3 17 11 6 5 8 15 13 9 12 19 7 2 10 15

4

1 1 14

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

7

ESD BASICS

1

ESD BASIC

Definitions

IEC 61340-5-1 is listing the following packaging characteristics: Electrostatic discharge shielding: a barrier or enclosure that limits the passage of current and attenuates the energy resulting from an electrostatic discharge such that the maximum energy from 1.000 V human body model discharge is 50 nJ. Electrostatic conductive: packaging with a surface resistance of 1 x 102 ohms and < 1 x 105 ohms. Electrostatic dissipative: packaging with a surface resistance of 1 x 105 ohms and < 1 x 1011 ohms. Insulative: packaging with a surface resistance of 1 x 1011 ohms. Low charging: packaging exhibiting properties which minimize any charge. (The terms astatic and antistatic should be avoided due to the different existing meanings). Is not specified in IEC 61340-5-1. ANSI/ESD-S8.1-2007: ESD Awareness Symbols. ANSI/ESD STM4.2-2006: ESD Protective Worksurfaces. The ESD susceptibility symbol incorporates a reaching hand in a triangle with a slash through it to indicate that the item so marked is susceptible to ESD damage and should not be touched without ESD safe handling controls. The ESD protective symbol differs from the ESD susceptibility symbol, by the addition of an arc around the outside of the triangle and the omission of the slash across the hand and the triangle. It should be used to identify items that are specifically designed to provide ESD protection, such as for instance packaging. Instead of the asterisk a letter indicates the primary function of the packaging material: S = Electrostatic Discharge Shielding D = Electrostatic Dissipative L = Low Charging C = Electrostatic Conductive ANSI/ESD-S7.1-2005: Floor Materials - Resistive Characterization. ANSI/ESD STM97.1-2006: Floor Materials and Footwear. ANSI/ESD STM12.1-2006: Seating - Resistive Measurement. ANSI/ESD-STM2.1-2006: Garments. ESD S11.31-2006: Shielding Materials - Bags. ANSI/ESD STM3.1-2006: Ionization. ANSI/ESD-S9.1-2006: Footwear - Resistive Characterization. ANSI/ESD-S1.1-2006: Wrist Straps. ANSI/ESD-S6.1-2005: Grounding. ESD ADV53.1-1995: ESD Protective Workstations. ESD Standards and Military Specifications IEC 61340-5-1: Protection of Electronic Devices from Electrostatic Phenomena - User Guide. IEC 61340-5-2: Specification for the Protection of Electronic Devices from Electrostatic Phenomena. ANSI/ESD S541-2003: Packaging materials for ESD sensitive items. JESD-625-A: Requirements for Handling ESDS Devices. ANSI/EIA-583: Packaging Material Standards for Moisture Sensitive Items. ANSI/ESD-S20.20-2007: Program for the Development of an ESD Program. ESD ADV1.0-2004: Glossary of terms.

ESD Symbols

8

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

ESD BASICS

1

ESD BASICS

ESD TR3.0-02-05: Selection and Acceptance of Air Ionizers. ANSI/ESD STM5.1-2007: Sensitivity Testing Human Body Model. ANSI/ESD STM5.2-1999: Sensitivity Testing Machine Model. ANSI/ESD S11.11-2006: Triboelectric Charge Accumulation Testing. EOS/ESD-S11.11-1993: Surface Resistance Measurement. MIL-HDBK-263: Electrostatic Discharge Control Handbook. MIL-PRF-81705: Barrier Materials, Flexible, Electrostatic Free, Heat Sealable. MIL-PRF-87893: Workstations, Electrostatic Discharge (ESD) Control. MIL-STD-1686: Electrostatic Discharge Control Program. IEC61340-4-1: Electrical resistance of floor coverings and installed floors. IEC61340-4-2: Test methods for garments. IEC61340-4-3: Footwear. IEC61340-4-5: Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person. IEC61340-2-1: Measurements methodsability of materials and products to dissipate Static Electric Charge. IEC61340-2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation.

Useful addresses ESD standards are available from: ESD Association, 7900 Turin Road, Building 3, Suite 2, Rome, NY 13440-2069, U.S.A., Phone +1 (315) 339-6937, Fax +1 (315) 339-6793, E-mail [email protected], Website http://www.esda.org NEN (Nederlands Normalisatie Instituut/NNI) Postbus 5059 2600 GB Delft [email protected]

ESD Training and Instruction ESD training and instruction are essential for a successful implementation of an ESD Control Program. People need to be convinced of the necessity of ESD protection. Subsequently they need to know and understand the proper use of ESD protective products.

In-house ESD Training In-house training, geared towards the specific requirements of the customer.

ESD Training Item No. 1602430 1600909 Description In-house Training CD-rom Training

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

9

P R O D U C T S F O R T H E E PA

2

PRODUCTS FOR THE EPA

Products for the EPA

An ESD safe workstation protects ESDS products by safely draining damaging static charges to ground. A wrist band connected with grounding cord prevents the operator from charging. Parts placed on a dissipative mat safely decay their static charge to ground. Both wrist band and worksurface mat should be grounded by a Common Point Ground.

10

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

P R O D U C T S F O R T H E E PA

Products for the EPA

Locations where an EPA is absolutely necessary are: ­ incoming goods ­ incoming goods inspection ­ warehouse ­ board assembly and testing ­ shipping department ­ field service

Dissipative Work Surface Mats Mat & Table Top Cleaner Dissipative Floor Mats Floor Finish System Field Service Kit Tapes EPA Warning Signs ESD Safe Chairs ESD Safe Furniture ESD Clothing ESD Gloves Dissipative Binders Dissipative Ordercover Dissipative Clipboard Dissipative Document Holders Conductive Waste Bins Low Charging Waste Bags Staticide Heavy Duty 12 13 13 14 14 15 16 18 18 19 19 20 20 20 20 21 21 21

2

PRODUCTS FOR THE EPA

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

11

P R O D U C T S F O R T H E E PA

Dissipative Work Surface Mats

Vinyl Mat 3,2 mm and Rubber Mat 1,5 mm work surface mats are available in two stock sizes, on rolls or to customer requirements. The stock sizes have two 7 mm connecting points on a short side and can be supplied as a work surface set with a Common Point Ground and a wrist band set (stretch adjustable wrist band with 360 cm grounding cord). Optional is an EBP Europlug.

Vinyl Mat 3,2 mm Vinyl Mat 6,4 mm

­ thickness 6,4 mm ­ blue homogeneous vinyl ­ will always lie flat, will not curl, will not slip, will not tear ­ highly resistant to abrasion ­ RS: 109 ohms (ESD S20.20) ­ static decay < 0,5 sec. (FTMS 101, MTH 4046.1, 5.000 V-0 V)

Vinyl Mat 6,4 mm Work Surface Mat

Item No. 1600954 Colour Blue Roll 1320 mm x 12,1 m

2

PRODUCTS FOR THE EPA

Vinyl Mat 3,2 mm is made of strong, durable vinyl and is constructed of three layers: top layer, thin conductive layer (buried layer) and a "foamy" bottom layer. ­ thickness 3,2 mm ­ available in blue and grey ­ lightweight ­ excellent flatness ­ RS: 10 ohms (ESD S20.20)

7

Rubber Mat 1,5 mm

The two layer Rubber Mat 1,5 mm work surface mat is constructed of a dissipative top layer with a conductive backing. The top layer is resistant to solvents, hot solder and soldering irons. ­ thickness 1,5 mm ­ available in blue, grey and beige ­ excellent flatness ­ RS: 107 ohms (EOS/ESD-S4.1) ­ RG: 106 ohms (EOS/ESD-S4.1) ­ static decay < 0,01 sec. (FTMS 101, MTH 4046.1, 5.000 V-0 V) ­ complies with IEC 61340-5-1

­ RG: 107 ohms (ESD S20.20) ­ complies with IEC 61340-5-1

Vinyl Mat 3,2 mm Work Surface Mat

Item No. 1600934 1600935 Colour blue grey Roll 1220 mm x 30,4 m 1220 mm x 30,4 m

Rubber Mat 1,5 mm Work Surface Mat

Item No. 1600943 1600944 1600946 1600952 1600936 1600942 Colour blue blue grey grey beige beige Roll 610 mm x 15,2 m 910 mm x 15,2 m 610 mm x 15,2 m 910 mm x 15,2 m 610 mm x 15,2 m 910 mm x 15,2 m

Different sizes available upon request

Different sizes available upon request

12

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

P R O D U C T S F O R T H E E PA

Mat & Table Top Cleaner

It is an absolute necessity to clean dissipative work-surfaces on a regular basis. This will prevent a too high RS caused by contamination.

Mat & Table Top Cleaner

Item No. 1601176 1601177 Description 12 spray botttles of 0,95 l 4 bottles of 3,8 l

­ effectively removes flux residues, oil, finger marks, grease, nicotine, dirt or grime and inorganic contaminants ­ leaves no film and is non-streaking ­ non-flammable ­ safe on any worksurface

2

PRODUCTS FOR THE EPA

Dissipative Floor Mats

When walking, people "tribocharge", building up static charges on their bodies. The body's static charge can safely be drained to ground by wearing conductive shoes or a shoe grounder on each shoe when walking on a conductive floor or floor mat. Dissipative Floor Mat 2,5 mm Dissipative Floor Mat 2,5 mm is a synthetic rubber with a conductive backing. Available as stock size floor mat, on rolls, and as runners to customer requirements. ­ thickness 2,5 mm ­ stock size mat is supplied with 450 cm straight grounding cord ­ RG: 106 ohms (ESD-STM 7.1-2005) ­ complies with IEC 61340-5-1

Dissipative floor mat 2,5 mm

Item No. 1600912 Roll 1220 mm x 10 m

Grounding cord for floor mat ­ 450 cm straight cord for grounding floor mats ­ 1 Mohm resistor

Grounding Cords for Floor Mat

Item No. 1600930 Colour black Termination screw->B/A

B/A = banana plug/alligator clip

Snap Tool This rugged, metal snap tool can be used to put 7 and 10 mm connecting points in worksurface mats or floor mats.

Snap Tool

Item No. 1601186 Connecting points 7/10 mm

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

13

P R O D U C T S F O R T H E E PA

Floor Finish System

Floor Finish System is a two step system for the ESD maintenance of floors, consisting of Dissipative Floor Stripper and Floor Finish. ­ Meets or exceeds MIL-B817058, NFPA 56A

2

PRODUCTS FOR THE EPA

Staticide Floor Finish System

Item No. 1601182 Stripper 1601180 Finish Packaging 4 bottles of 3,8 l 4 bottles of 3,8 l

Field Service Kit

For maintenance or repair of electronic equipment in the field, a field engineer should always use a Field Service Kit to prevent ESD damage. ­ Field Service Mat, with two large pockets, 20 x 30 cm ­ 7 mm connecting point ­ wrist band set (stretch adjustable wrist band with 360 cm coil cord) ­ Common Point Ground with bulligator clip ­ RS: 107 ohms (ASTM D257) ­ resistance conductive layer 103 ohms (ASTM D257) ­ complies with IEC 61340-5-1 ­ optional: pouch

Field Service Kit

Item No. 1601171 1601172 Colour dark blue red Size in mm 600 x 600 600 x 600

14

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

P R O D U C T S F O R T H E E PA

Tapes

Double Sided Tape Double sided tape to adhere worksurface mats and floor runners to respectively the workbench and the floor.

Double Sided Tape

Item No. 1601437 Roll 50 mm x 25 m

Floor Marking Tape Self adhesive tape to define the boundaries of an EPA. ­ PVC, laminated with clear PP for durability and washability ­ life expectancy 3-12 months ­ printed "ESD Protected Area" with ESD caution logo

2

PRODUCTS FOR THE EPA

Copper Grounding Tape Copper grounding tape is used to ground floor mats.

Floor Marking Tape

Item No. 1603174 Roll 50 mm x 66 m

Copper Grounding Tape

Item No. 1600651 Roll 12 mm x 33 m

ESD Tapes

ESD Tapes are used as a replacement for standard adhesive tape in EPA's.

ESD Tapes

Item No. 1603973 1603974 Description Dimensions

Clear Antistatic Tape 25 mm x 66 m Antistatic Packaging Tape 50 mm x 66 m

­ does not generate electrostatic charge ­ suitable for use in an EPA ­ printed yellow with black logo and text to EN 61340-5

1603974 1603973

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

15

P R O D U C T S F O R T H E E PA

EPA Warning Signs

Floor stickers are used to define and indicate the limits of an EPA.

Floor Stickers

Item No. Size in mm 120 x 60 Language English

2

PRODUCTS FOR THE EPA

1603891

IEC 61340-5-1 requires that grounding points are clearly designated. This can be done with EBP (Earth bonding Point) and EGP (Earth grounding Point) labels. ­ made of strong, self-adhesive vinyl ­ yellow, with black print ­ 12 mm hole for fitting the label over a press stud connector

EBP labels

Item No. 1600905 1600906 Description Earth Bonding Point Earth Grounding Point

16

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

P R O D U C T S F O R T H E E PA

EPA Warning Signs

According to IEC 61340-5-1 the EPA has to be identified as such. ­ made of yellow "foamex" ­ treated with a low charging coating ­ printed in black to IEC 61340-5-1 ­ radiused corners with holes for fixing

EPA warning sign

Item No. 1601732 1600893 Size in mm 300 x 150 300 x 150 Language English Dutch

2

PRODUCTS FOR THE EPA

It is crucial to really identify when you are leaving an EPA. ­ help raise awareness of the EPA ­ conforms to EN 61340-5-2 §4.3 ­ an aid to both visitors and employees

EPA Exit warning sign

Item No. 1603173 Size in mm 300 x 150 Language English

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

17

P R O D U C T S F O R T H E E PA

ESD Safe Chairs

Normal chairs can generate static charges. An ESD safe chair has a conductive path from the seat and backrest to the conductive castors. Placed on a conductive floor or floor mat the chair is thus grounded. Optional: ­ ESD safe armrests ­ ESD safe footring ­ Cleanroom version ­ ESD "Stop & Go Wheels" ­ colours: black, blue, grey, red

2

PRODUCTS FOR THE EPA

­ 100% ESD safe (seat, backrest and covers)

ESD Safe Chair

Item No. 1603156 1603159 1603162 1603164 Other options available upon request Description ESD Basic Model 2 ESD Sintec Model 2 ESD Unitec ESD Stahulp

ESD Safe Furniture

Our ESD Safe Furniture and its accessories are suitable for usage within an EPA. ­ dissipative hard laminate work surface ­ RG: 106 ohms ­ connecting points for wrist band left and right below the work surface ­ working height adjustable ­ also available with shelves, adjustable in height and angle

ESD Safe Furniture

Item No. 1603167 1603168 1603385 1603386 Other options available upon request Work surface size in mm 1000 x 800 1200 x 800 1400 x 800 2000 x 800

18

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

P R O D U C T S F O R T H E E PA

ESD Clothing

While working on an EPA, ESD Clothing is necessary to make sure that people do not charge the products that they are working with. We have a wide product range to fulfill your needs.

ESD Clothing

Item No. 1604173 1604201 1604442 1604330 1604331 Description Men Lab Coat ­ Naptex Men Lab Coat ­ Conductex ESD Polo Shirt ­ short sleeves, cotton ESD Polo Shirt ­ long sleeves, cotton ESD T-Shirt ­ short sleeves Colour white white royal blue/grey royal blue/grey silver-grey

Naptex: - basis fabric polyester-cotton - conductive yarns based on steel fibers encapsulated with cotton - Naptex clothing is approved and owning to its good dissipation values used by most of the customers still after many washing cycles - typical surface resistance Rs: 104 - 105 ohms Conductex: - basis fabric polyester-cotton - proprietary carbon-based conductive yarns - typical surface resistance Rs: 105 - 106 ohms - colours: white, royal blue, pastel blue

2

PRODUCTS FOR THE EPA

Naptex is also available in petrol, light blue, royal blue and grey. Conductex is also available in royal blue and light blue. ESD Polo Shirt, short sleeves is also available in white, dark green/ grey, navy/grey, silver-grey/navy, silver-grey/red and silver-grey. ESD Polo Shirt, long sleeves is also available in white and silvergrey/navy. ESD T-Shirt is also available in royal blue. Available sizes: S, M, L, XL, XXL and other sizes available upon request.

ESD Gloves

ESD Gloves are suitable for electronic assembly as they minimize the static generation. Elastic and comfortable, enable a very precise handling.

ESD Gloves

Item No. 1601772 1601770 1601773 1602036 1603945 Description Model Hamburg Model Hamburg Model Hamburg Model Hamburg Model Hamburg Colour S M L XL XXL

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

19

P R O D U C T S F O R T H E E PA

Dissipative Binders, Ordercover, Clipboard and Document Holders

One of the first requirements in ESD Control is to get rid of "normal" plastics. With this in mind the dissipative binders, ordercover and clipboard were designed. Dissipative Clipboard ­ holds size DIN A4 ­ sprung metal clip holds paper ­ printed with ESD caution text

Dissipative Clipboard

Item No. 1600899 Description Dissipative Clipboard

2

PRODUCTS FOR THE EPA

­ made of dissipative light blue vinyl ­ RS: 1011 ohms Dissipative Binders ­ hold size DIN A4 ­ 4-rings mechanism ­ printed with ESD logo

Dissipative Binders

Item No. 1600898 1600897 Description Binder A4 Binder A3

Dissipative Document Holders ­ dissipative pink PE

Dissipative pink PE Document Holders

Item No. 1601556 1601558 Size A4, 1 short side open A4, 1 short and 1 long side open

Dissipative Ordercover ­ holds size DIN A4 ­ windowed front plate ­ back plate with diagonal pocket for paperwork ­ 2 quick-binders ­ printed with ESD logo

Dissipative Ordercover

Item No. 1601479 Description Dissipative Ordercover

20

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

P R O D U C T S F O R T H E E PA

Conductive Waste Bins

Inside an EPA there is the need to have waste bins for the trash. The Conductive waste bins are suitable and in conformance with the IEC 61340-5-1. ­ made of conductive fiber board 2 mm thick ­ RS < 103 ohms ­ reinforced with metal hoop at the top

Conductive Waste Bins

Item No. 1600890 1600888 Content in liter 30 110 Size in mm 250 x 250 x 400 400 x 400 x 780

2

PRODUCTS FOR THE EPA

Low Charging Waste Bags

The low charging waste bags are applicable and for use inside of the Conductive waste bins. ­ made of low charging polyethylene ­ comparable in strength to conventional refuse sacks ­ printed in black with ESD protective symbol and text

Low Charging Waste Bags

Item No. 1601477 1601478 Content in liter 30 110 Size in mm ± 280 x 700 ± 460 x 990

Staticide Heavy Duty

Staticide is an inexpensive, easy-to-use topical antistatic solution, is a highly-effective method for long-term static control. It is widely used in a broad range of industries, as well as in the office. ­ meets MIL-B-81705 and NFPA-56A electrostatic decay criteria ­ can be applied as spray, wipe, dip or by transfer roller coating, gravure coating or flexographic printing ­ non-toxic and non flammable ­ easily applied on walls, ceilings, floors, carpets, fixtures, worksurfaces, tools and equipment, conveyor belts, clothing and other materials ­ proven effective in relative humidities below 15%

Staticide Heavy Duty

Item No. 1601183 1601184 Packaging 12 spray bottles of 0,95 l 4 bottles of 3,8 l

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

21

GROUNDING PRODUCTS

3

GROUNDING PRODUCTS

Grounding Products

The first line of defense against the hidden dangers of ESD is good grounding by means of wrist bands, grounding cords and shoe grounders. Daily testing of wrist bands, grounding cords and shoe grounders is necessary and required by IEC 61340-5-1.

22

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

GROUNDING PRODUCTS

Grounding Products

Wrist Bands Grounding Cords Common Point Grounds Adapt-A-Snaps EBP Europlug EBP Bar Shoe Grounders Disposable Heel Straps Conductive Disposable Shoe Covers ESD Shoes Groundcheck Grounding Tester Groundcheck Backplate Groundcheck Footplate Groundcheck Calibration Monitor Constant Wrist Strap Monitor 24 25 25 26 26 26 27 28 28 28 29 29 30 31 31

3

GROUNDING PRODUCTS

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

23

GROUNDING PRODUCTS

Wrist Bands

Stretch Wrist Bands Our unique band material is manufactured using a patented crochet process. This Crochet Band is popular because it is comfortably soft and light, yet durable and reliable. The band has total insulation on the outside for maximum protection. The inside of the band is lined with a special yarn that is coated in silver to provide superior conductivity and is constructed to "float" on the underside of the band to offer maximum contact with the skin. All adjustable bands are made to fit any size wrist. Buckles are made with static dissipative nylon material. ­ 3 mm stud with 360° swivel ­ anti-allergic backplate ­ Meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006 Ergo Wrist Bands All our metal bands are made of jewelry-grade expandable stainless steel. The bands are insulated with a triple-layer oven-baked coating, similar to that used in the automobile industry. All models of metal bands come with our patented "X-tenders" which smartly-designed inter-connectable plastic links are enabling the user to adjust or expand the strap to any wrist size by using one or more of the 5 pieces provided. This renders the metal band extremely comfortable and eliminates the need to stock up on different sizes. ­ 3 mm stud with 360° swivel ­ Easily adjustable from 130-170 mm using one or more of the five 10 mm nylon expansion links ­ Meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006

Ergo Wrist Bands

Circumference 145 mm adjustable Version stretch stretch Item No. 1600908 1600907 Colour yellow dark blue Circumference adjustable adjustable Version metal metal

3

GROUNDING PRODUCTS

Stretch Wrist Bands

Item No. 1601043 1601042 Colour grey dark blue

24

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

GROUNDING PRODUCTS

Grounding Cords

Our grounding cords can meet and surpass any rigid specification and possess an exceptionally long service life. All cords are insulated with Polyurethane. ­ 100% retraction ­ 1 mohm resistor ­ 3 mm snap ­ Banana plug/alligator clip termination or 7 mm snap termination ­ meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006

Grounding Cords

Item No. 1600929 1600926 1600931 Colour dark blue dark blue black Length 360 cm 180 cm 180 cm Termination 3 mmB/A 3 mmB/A 3 mmB/A

Grounding Cords

Item No. 1600928 1600924 Colour dark blue dark blue Length 360 cm 180 cm Termination 3 mm7 mm 3 mm7 mm

B/A = banana plug/alligator clip

3

GROUNDING PRODUCTS

Common Point Grounds

Common Point Grounds take care of the proper grounding of the operator and worksurface mat. by using an Adapt A Snap additional personnel can quickly plug into the ESD safe workstation and can be properly grounded. ­ 450 cm straight grounding cord ­ quick release snap with full 360° swivel ­ dark blue ­ 1 Mohm resistor ­ meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006

Common Point Grounds

Item No. 1600886 1600885 Mat connection 7 mm female/ 7 mm male 7 mm female/10 mm male Termination B/A B/A

B/A = banana plug/alligator clip

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

25

GROUNDING PRODUCTS

Adapt-A-Snaps

The Adapt-A-Snap attached to a Common Point Ground unit or to an existing grounding point allows additional personnel to plug into the same ground connection.

Adapt-A-Snaps

Item No. 1600855 1600862 Mat connection 10 mm male / 10 mm female 7 mm male / 7 mm female

EBP Europlug

The EBP Europlug is identical to a standard plug, however with plastic (life) and (neutral) pins used

3

GROUNDING PRODUCTS

only for locating the plug. ­ yellow ABS with black print ­ provides a simple and effective grounding using the ring mains earth as ground ­ front side of the plug has two 4 mm plug sockets and one 7 mm male stud ­ 1 Mohm resistor ­ complies with IEC 61340-5-1

EBP Europlug

Item No. 1600904 Description EBP Europlug

EBP Bar

Earth bounding point bars are designed to be mounted on under-side of bench top or shelf. ­ yellow ABS with black print ­ two 4 mm plug sockets and one 7 mm male stud ­ each grounding point is connected with 1 Mohm resistor ­ straight grounding cord of 2 m with a 5 mm ring terminal ­ complies with IEC 61340-5-1

EBP Bar

Item No. 1600903 Description EBP Bar

26

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

GROUNDING PRODUCTS

Shoe Grounders

We offer both heel grounder and toe grounder. Our designs are adjustable to fit all types of footwear. The ground strap reliably provides positive contact with the skin inside the sock or the shoe. On the outside surface, our heel and toe grounders use specially reinforced black conductive rubber for superior static control and on the inside; we use white, non-scuffing insulating rubber to prevent the transfer of black smudges or dirty marks on the user. Reversible Heel Grounder ­ quick release buckle ­ reversible heel cup ­ longer lifetime ­ meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006

Reversible Heel Grounder

Item No. 1600933 Description Reversible Heel Grounder

Heel Grounder ­ quick release buckle ­ unique elasticized rear section provides fit and comfort to all shoe types and sizes ­ bright red heel band for clear identification ­ meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006

Heel Grounder

Item No. 1600932 Description Adjustable Heel Grounder

3

Toe Grounder ­ for pumps or high heels ­ unique elasticized rear section provides fit and comfort ­ bright red heel band for clear identification ­ meet or exceed IEC 61340-5-1, MIL HDBK 263B, MIL STD 1686B and ANSI/ESD-S1.1-2006

Toe Grounder

Item No. 1601044 Description Toe Grounder GROUNDING PRODUCTS

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

27

GROUNDING PRODUCTS

Disposable Heel Straps

Bright yellow disposable heel straps can easily be seen when being worn. Good for short term use and ideal for visitors.

Disposable Heel Straps Item No. 1600895 1604466 Description Disposable heel straps Conductive plastic wall dispenser

Conductive Disposable Shoe Covers

Operators wearing conductive shoe covers will be permanently grounded via the conductive floor mat or floor. The grounding tab is worn in shoe or sock and makes contact with the skin.

3

GROUNDING PRODUCTS

­ for permanent grounding ­ re-usable ­ easy to wear

Conductive Disposable Shoe Covers Item No. 1601197 Description Neutro Stat Boots

ESD Shoes

The main task of ESD shoes is to discharge static electricity stored in a person through the floor in a reliable and safe manner under all conditions. ­ removable and washable insole ­ heel shock absorption ­ air pumping soft insole that provides additional shock absorption ­ energo additional shock absorber enhances heel absorption ­ the torsion support reduces stress on the forefoot and makes the shoe robust ­ oil-resistant outer sole

Disposable Item No. 1603856 1603857 1603858 1603859 1603860 Description Women Shoes Men's Office Shoes - Classic Men's Office Shoes Men's Shoes Citytrainer Men's Shoes Working 1603857 1603859 1603860 1603856

1603858

Other types available upon request.

28

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

GROUNDING PRODUCTS

Groundcheck Grounding Tester

The Groundcheck is a dependable easy to use test mechanism for personnel grounding devices. ­ pass indicated by a visible and audible signal, high fail and low fail by a visible signal ­ test range 750 Kohms - 35 Mohms ­ 20 V test voltage ­ accuracy +/- 10% ­ supplied with calibration certificate ­ uses a 9 V alkaline battery ­ indicator for low battery ­ 7 mm press stud, 4 mm plug socket, 6 mm stud for alligator clip ­ complies with IEC 61340-5-1 ­ CE compliant

Groundcheck Grounding Tester

Item No. 1600922 Size in cm 6,8 x 11,5 x 2,5 Description Groundcheck Grounding Tester

3

GROUNDING PRODUCTS

Groundcheck Backplate

In combination with a Backplate, the Groundcheck can be used as a central grounding tester at the entrance of the EPA. ­ printed with clear test instructions ­ 4 and 10 mm connecting point for grounding cords ­ 10 mm press stud for connection to the Footplate ­ size 30 x 20 cm ­ 4 mounting screws are included

Groundcheck Backplate

Item No. 1600877 1600873 Other languages available upon request Language Dutch English

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

29

GROUNDING PRODUCTS

Groundcheck Footplate

The metal Footplate can be used in combination with the Groundcheck and the Backplate for testing of shoe grounders and conductive footwear. ­ 10 mm press stud ­ 200 cm straight wire with 1 Mohm resistor for connection to the Backplate

Groundcheck Footplate

Item No. 1600920 Size in cm 15 x 30 Description Groundcheck Footplate

3

GROUNDING PRODUCTS

30

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

GROUNDING PRODUCTS

Groundcheck Calibration Monitor

The Groundcheck Calibration Monitor was designed to monitor the Groundcheck Grounding Tester to be working within the parameters of IEC 61340-5-1. ­ 4 test positions: low fail, low pass, high pass, high fail ­ CE compliant

Groundcheck Calibration Monitor

Item No. 1600919 Size in cm 6,8 x 11,5 x 2,5 Description Groundcheck Calibration Monitor

3

Constant Wrist Strap Monitor

The Constant Wrist Strap Monitor continuously measures the operator's wrist strap and ground connection. ­ pass indicated by a green LED flash, fail indicated by an audible signal and a red LED flash ­ 9 V DC adapter, 110 V AC 300 ma ­ test voltage nominal 7,5 V ­ accuracy +/- 5% ­ weight 85 g ­ CE compliant

Constant Wrist Strap Monitor

Item No. 1600894 Size in cm 8 x 5,6 x 2,5 Description Constant Wrist Strap Monitor GROUNDING PRODUCTS

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

31

E S D P R O T E C T I V E PA C K A G I N G

4

ESD PROTECTIvE PACkAGING

ESD Protective Packaging

ESD Protective Packaging is a major step in an ESD Control Program and should, depending on the application, feature the following functions: ­ prevention of charge generation ­ shielding against ESD and electrostatic fields ­ mechanical protection ­ corrosion protection

32

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

ESD Protective Packaging

Static Shielding Bags Dry Shielding Bags Desiccant Bags Humidity Indicator Cards VCI for ESD applications Dissipative Pink PE Permanent Dissipative Film ESD Bubble Wrap Dissipative PE Foam Conductive PE Foam Dissipative PU Foam Component Boxes PCB Boxes Cortronic Shielding Corrugated Carton Plastic Conductive Containers Conductive Corrugated PP Vacuum Thermoformed Trays Conductive Pallets ESD Airpad Membrane Boxes Cleanroom Packaging 34 35 36 36 37 38 39 40 40 41 41 42 43 43 47 48 48 49 49 50 51

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

33

E S D P R O T E C T I V E PA C K A G I N G

Static Shielding Bags

Static Shielding Bags have been designed for ESD safe packaging of PCB´s and IC´s. They protect their contents against ESD and electrostatic fields. Static Shielding 7200 Bags ­ "buried layer, metal in" construction ­ construction from outside to inside: dissipative coating/metalized PET/dissipative LDPE, total gauge 0,08 mm +/- 10% ­ amine free and polycarbonate compatible ­ puncture resistance > 12 lbs (FTMS 101, MTH 2065.1) ­ light transmission 40% ­ printed with ESD logo and lot code for traceability ­ RS of inner and outer layer < 1011 ohms (ESD- S11.11) ­ resistance of aluminium layer 100 ohms (ASTM D257, 12% relative humidity) ­ static shielding < 10 nJ (ESD-S11.31) ­ static decay < 0,05 sec. (MIL-STD-3010) ­ meet or exceed IEC 61340-5-1, MIL PRF 81705D, Type III, Class 1 ­ RoHS compliant

Static Shielding 7200 Bags

Item No. 1601135 1601101 1601102 1601103 1601105 1601106 1601107 1601110 1601111 1601113 1601114 1601115 1601116 1601118 1601119 1601120 1601123 1601124 1601125 1601126 1601128 1601129 1601130 1601131 Size in mm 76 x 127 102 x 102 102 x 152 102 x 610 127 x 203 152 x 203 152 x 254 152 x 610 178 x 406 203 x 254 203 x 305 203 x 406 203 x 610 254 x 305 254 x 356 254 x 610 279 x 381 305 x 406 305 x 457 356 x 457 381 x 457 406 x 457 457 x 457 457 x 610 Size in inches 3" x 5" 4" x 4" 4" x 6" 4" x 24" 5" x 8" 6" x 8" 6" x 10" 6" x 24" 7" x 16" 8" x 10" 8" x 12" 8" x 16" 8" x 24" 10" x 12" 10" x 14" 10" x 24" 11" x 15" 12" x 16" 12" x 18" 14" x 18" 15" x 18" 16" x 18" 18" x 18" 18" x 24"

Other sizes available upon request

4

ESD PROTECTIvE PACkAGING

Static Shielding 7210 Zip Top Bags Static Shielding 7210 Zip Top Bags feature the same properties as Static Shielding 7200 Bags. With a low charging, amine free dual track Zip Top closure as an alternative to folding bags and securing them with an ESD caution label.

Static Shielding 7210 Zip Top Bags

Item No. 1601144 1601136 1601137 1601138 1601139 1601142 1601143 Size in mm 76 x 127 102 x 152 152 x 254 203 x 254 254 x 356 356 x 457 457 x 457 Size in inches 3" x 5" 4" x 4" 6" x 10" 8" x 10" 10" x 14" 14" x 18" 18" x 18"

Other sizes available upon request

34

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Dry Shielding Bags

The Surface Mount Technology has created devices which are increasingly sensitive for the damaging effects of moisture, corrosion and ESD. Dry Shielding Bags protect against those damaging influences. They meet or exceed the most critical requirements of water vapour transmission and ESD shielding and also offer EMI protection. The tough Dry Shielding Bags are heat sealable and are suitable for vacuum and/or nitrogen flushed packaging. They are ideal for packaging of SMDs in trays, tubes or on tape and reel. The requirements for dry packaging are described in EIA 583. Dryshield 7000 Bags ­ strong, lightweight, suitable for vacuum packaging and nitrogen flushing ­ construction from outside to inside: dissipative PET Alu/PET/Alu/dissipative LDPE/total gauge 0,09 mm +/- 10% ­ amine free, polycarbonate compatible ­ MVTR < 0,02 g/100 S9.IN./ 24 HRS (ASTM F1249) ­ puncture resistance > 20 lbs (FTMS 101, MTH 2065.1) ­ printed with ESD and moisture warning symbol and lot code for traceability ­ RS of inner and outer layer < 1011 ohms (ANSI/ESDS11.11) ­ resistance of alu layer 100 ohms (ASTM D257, 12% RH) ­ static shielding < 10 nJ (ESD-S11.11) ­ EMI attenuation 45 dB (MIL PRF 81705D) ­ static decay < 0,03 sec. (MIL-STD-3010) ­ meet or exceed IEC 61340-5-1, MIL PRF-81705D, Type I, Class 1 and EIA 583

Dryshield 7000 Bags

Item No. 1601151 1601153 1601149 Size in mm 254 x 508 254 x 762 406 x 457 Size in inches 10" x 20" 10" x 30" 16" x 18"

Other sizes available upon request

Dryshield 7700 Bags Dryshield 7700 Bags feature the same properties as Dryshield 7000 Bags, however with lower MVTR and higher puncture resistance. ­ construction from outside to inside: extra thick dissipative PET/Alu/PET/Alu/extra thick dissipative LDPE, total gauge 0,18 mm +/- 10% ­ MVTR < 0,005 g/100 S7.IN./ 24 HRS (ASTM F1249) ­ puncture resistance > 30 lbs (MIL-STD-3010)

Dryshield 7700 Bags

Item No. 1601154 1601156 Size in mm 254 x 762 406 x 457 Size in inches 10" x 30" 16" x 18"

Other sizes available upon request

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

35

E S D P R O T E C T I V E PA C K A G I N G

Desiccant Bags

In order to reach an optimal low relative humidity (RH) desiccant bags have to be included in the Dryshield Bags. According to EIA 583 dry shielding bags are incomplete without desiccant bags. ­ adsorb the moisture left inside the bags after vacuum sealing and capture the moisture that manages to pass through the bag material ­ prevent the relative humidity to rise above a critical percentage ­ are filled with activated clay and made of strong GDT material ­ meet or exceed DIN 55473B and MIL D 3464E, Type II

Desi Pak Desiccant Bags GDT

Item No. 1600702 1600704 1600708 Units 1/2 1 2 Quantity/box 540 350 210

Other options are available upon request

Humidity Indicator Cards

4

ESD PROTECTIvE PACkAGING

Humidity indicator Cards are colour change indicators. They are reversible. As the humidity increases the chemically impregnated spots change from a blue colour through a lavender, to a pink colour, indicating whether or not a critical RH has been reached. Humidity Indicator Cards go hand in hand with the desiccant bags inside the Dry Shielding Bags.

Humidity Indicator Cards

Item No. 1600678 1600675 1600680 1600674 Colour change at % RH 10, 20, 30, 40 10, 20, 30, 40, 60 5, 10, 15 5, 10, 60 Size in mm 75 x 40 110 x 40 76 x 52 76 x 52

36

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Volatile Corrosion Inhibitor for ESD applications

Volatile Corrosion Inhibitor emitter Tyvek sachets Protects ferrous and non-ferrous metals from corrosion. One sachet saturates 28 L of air with VCI. Protective VCI film needs no removal and parts can be immediately used. Should be packed together with parts to be protected in a closed package (PEbag, corrugated, plastic or metal box etc). Sachet is non-dusting, non-linting and electrically low-charging. NATO Stock Number 6850-01-470-2737. Conform to MIL-I-22110 C. Shelf life 2 years in unopened packaging.

VCI emitter Tyvek sachets

Item no. 1702301 Description 64x64 mm Tyvek sachet, 300 sachets/box

Static dissipative Volatile Corrosion Inhibitor bags and film (also Cleanroom, class 50 version) Static dissipative VCI bags and film combines the properties of pinkpoly bags and VCI corrosion protection. Protection is given to steel, copper & its alloys, aluminium & its alloys, brass, solder, silver, nickel (for other substances, please inquire). VCI does not affect plastics used in the electronics industry. Protective VCI film needs no removal and parts can be immediately used. Available as flat and gusset bags, flat film and tube in 50-150 m thickness and maximum tube width of 1,3 m. Flat bags are optionally available with zip closure. Also available in a Cleanroom version, class 50. The static dissipative properties are achieved, free of amines, phosphates, silicones or other harmful substances. Shelf life 1 years in unopened packaging.

VCI Bags

Item no. 1702594 Description VCI Bag 450x600 mm, 50 m

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

37

E S D P R O T E C T I V E PA C K A G I N G

Dissipative Pink PE

Dissipative pink poly is an ESD safe packaging material that can be supplied as bags, zip top bags, tubing and sheeting. Dissipative Pink PE, 0,09 mm ­ amine free and polycarbonate compatible ­ RS of both surfaces < 1012 ohms (ANSI/ESD-S11.11) ­ static decay < 2 sec. (FTMS 101, MTH 4046.1, 1.000 V-0 V) ­ also available for Cleanroom applications ­ complies with IEC 61340-5-1

Dissipative Pink PE Bags, 0,09 mm

Item No. 1601689 1604072 1603056 1604073 1603057 1604074 1603975 1604075 1604076 1604077 1603976 1604078 1602686 1604079 Size in mm 76 x 127 102 x 152 127 x 203 152 x 203 152 x 254 203 x 254 203 x 305 203 x 406 254 x 305 305 x 356 305 x 406 305 x 457 406 x 508 457 x 610

Dissipative Pink PE Sheeting, 0,09 mm, rolls 152 m

Item No. 1604133 Roll width in mm 1372

Dissipative Pink PE Tubing, 0,09 mm, rolls 250 m

Item No. 1604126 1604127 1604128 1604129 1604130 1604131 1604132 Roll width in mm 100 150 200 250 300 400 500

4

ESD PROTECTIvE PACkAGING

38

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Permanent Dissipative PE

Permanent Dissipative PE is based on a novel inherently dissipative polymer (IDP) that is able to conduct ions. IPE is an abbreviation for Ionomer Poly Electrolyte. This polymer can be used to create plastics and plastic products with permanent, immediate and humidity independent dissipative and low charging properties (antistatic). The film has insulative middle layer and outer or both surfaces are dissipative made with. Thickness of the skin layers can be as thin as extrusion process allows. With multi-layer blown film extrusion lines it is possible to manufacture new type of cost effective, dissipative films. With Permanent Dissipative PE functionality is permanent, immediate and it works in low humidity conditions. Nefab can offer ready-made films for specific customer needs. Barrier films (gas and vapor) with static dissipative properties (ESD) are available. The maximum film width is 2500 mm and thickness range is from 40 m to 140 m. EVOH and nylon layers can be used to build special barrier properties. Films are processed with top of the line 3-, 5- or 8-layer blown film extrusion lines and proven manufacturing practices.

Advantages of Permanent Dissipative PE:

­ true dissipative static decay properties vs. antistatic ­ meets and exceeds IEC 61340-5-1 standard ­ immediate functionality after processing ­ permanent functionality ­ works also on low humidity conditions < 20% RH ­ uniform conductivity (no hot spots) ­ non-corrosive ­ non-migratory ­ low ionic out-gassing ­ RoHS confirming ­ halogen free ­ recyclable ­ heat sealable

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

39

E S D P R O T E C T I V E PA C K A G I N G

ESD Bubble Wrap

Bubble cushioning not only protects against ESD damage, but also provides excellent cushioning properties. ­ diameter of the bubbles ca. 10 mm, ca. 5 mm high ­ pink bubble with ESD logo ­ RS of dissipative pink bubble < 1011 ohms or black conductive bubble < 105 ohms (ASTM D257) ­ static decay < 2 sec. (FTMS 101, MTH 4046.1, 5.000 V-0 V) ­ available on rolls and sheets and to customer requirements ­ pink bubble also available on rolls with tear perforation and as bags

Dissipative Pink Bubble

Item No. 1601947 1601279 Rolls 500 mm x 50 m 1000 mm x 50 m

Conductive Black Bubble

Item No. 1602366 1601277 Rolls 600 mm x 100 m 1200 mm x 100 m

Other sizes available upon request

Other sizes available upon request

Dissipative PE Foam

4

ESD PROTECTIvE PACkAGING

Dissipative pink closed cell polyethylene foam (PE) provides protection against physical shock, vibration and abrasion in both in plant handling and shipping. The dissipative PE foam does not contain carbon but offers sufficient conductivity to prevent ESD damage. The foam can be used for shunting the leads of components and is also suitable for production of tailor-made fittings of boxes. ­ density 20-35 kg/m3 (depending on application) ­ RS < 1011 ohms (ANSI/ESD-S11.11) ­ static decay < 2 sec. (FTMS 101, MTH 4046.1, 5.000 V-0 V) ­ available on rolls, sheets and as tailor-made fittings

Dissipative PE Foam

Item No. 1602197 1603421 Description Foam Sheet Foam Roll Size 550 x 500 x 6 mm 1200 mm x 175 m x 3 mm

Other sizes available upon request

40

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Conductive PE Foam

Permanent conductive, black, cross linked polyethylene foam (PE) is ideal for shorting ICs. This quality does not crumble or dust and does not cause corrosion. ­ density 30-60 kg/m3 ­ RS < 105 ohms (ASTM D257) ­ static decay < 2 sec. (FTMS 101, MTH 4046.1, 5.000 V - 0 V) ­ available in sheets and as tailor-made fittings

Conductive PE Foam

Item No. 1600876 1600878 Description Foam Sheet Foam Sheet Size 800 x 600 x 10 mm 800 x 600 x 7 mm

Other sizes available upon request

Dissipative PU Foam

The soft and flexible properties of dissipative pink polyurethane foam (PU) makes it an excellent cushioning material for PCBs and other light and/or irregularly shaped products. Dissipative polyurethane foam features an optimal protection against shock and vibration. ­ density ca. 20-25 kg/m3 ­ RS < 1011 ohms (ASTM D257) ­ static decay < 2 sec. (FTMS 101, MTH 4046.1, 5.000 V - 0 V) ­ available as flat or convoluted sheets and as tailormade fittings ­ sizes available upon request

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

41

E S D P R O T E C T I V E PA C K A G I N G

Component Boxes

Boxes for ESD safe packaging of components are available in black conductive polystyrene and in Cortronic shielding corrugated carton, with or without dissipative or conductive foam. IC box ­ made of conductive polystyrene ­ ESD caution label with English text ­ available with pink dissipative and black conductive PE foam

Component Boxes

Item No. 1601470 Description IC box Inside dimension in mm 107 x 82 x 14

Cortronic Eprom Boxes ­ Cortronic shielding corrugated carton ­ 6 mm black conductive foam ­ yellow print with ESD warning text in German, French and English

Cortronic Eprom Boxes

Item No. 1601212 1601231 1601211 1603573 Inside dimension in mm 95 x 30 x 15 100 x 60 x 15 120 x 100 x 15 155 x 70 x 25

4

ESD PROTECTIvE PACkAGING

Dip Strip Single Device Carrier ­ conductive polystyrene ­ suitable for 300 and 600 mil dip's ­ available on strips of 5

Dip Strip Single Device Carrier

Item No. 1601466 Inside dimension in mm 75 x 40 x 20

Cortronic SIMM Box ­ Cortronic shielding corrugated carton ­ available with Cortronic folded insert ­ also available with 20 mm conductive convoluted foam

Cortronic SIMM Box

Item No. 1601214 1600884 Inside dimension in mm 120 x 66 x 40 conductive convoluted foam

42

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

PCB Boxes

PCB boxes have been designed for ESD safe and shock protecting packaging, transportation and storage of single PCB's. The boxes are lined with dissipative pink convoluted polyurethane foam. PCB box for single and double Eurocard ­ one piece box ­ lined with dissipative pink convoluted polyurethane foam ­ print with ESD warning symbol and text

PCB box for single and double Eurocard

Item No. 1602031 1602032 Inside dimension in mm 210 x 155 x 55 285 x 210 x 55

PCB FEFCO 0427 box ­ a one piece box with loose dissipative pink convoluted polyurethane foam ­ available in a number of sizes and to customer specification

PCB FEFCO 0427

Item No. 1601550 1601489 1601490 1601491 1601492 1602210 See also Cortronic PCB boxes. Inside dimension in mm 255 x 178 x 50 331 x 255 x 50 331 x 255 x 75 483 x 331 x 50 483 x 331 x 75 545 x 495 x 85

PCB sleeve and slider box ­ consists of slider lined with dissipative pink convoluted polyurethane foam and an outer sleeve ­ available in a number of sizes and to customer specification

Cortronic Shielding Corrugated Carton

Cortronic features effective ESD safe packaging for electronics. The ESD shielding layer is integrated in the corrugated structure. ­ RS outer layers 107-8 ohms (ANSI/ESD-S11.11) ­ ESD shielding 10 nJ (ESD-S11.31) ­ static decay < 1 sec. (FTMS 101, MTH 4046.1, 5.000 V - 0 V) ­ environment friendly (re-usable, recyclable, water soluble and biological degradable) ­ available in a large number of stock versions ­ available to customer specification, also with custom print ­ meets or exceeds IEC 61340-5-1

!"##"$%&'() *+,,-.%/(0) 12"(30"4.) !"##"$%&'()

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

43

E S D P R O T E C T I V E PA C K A G I N G

Cortronic Shielding Corrugated Carton

Cortronic PCB boxes

Item No. 1601233* 1601220* 1601213 1601221 1601222 1601223 1601224 1601615 1601226 1601227 1601228 1601229 1601621 Inside dimension in mm 40 x 40 x 15 62 x 62 x 25 100 x 55 x 25 183 x 127 x 38 178 x 127 x 64 190 x 135 x 40 250 x 191 x 38 250 x 191 x 110 267 x 216 x 64 300 x 300 x 100 380 x 280 x 60 420 x 220 x 40 420 x 220 x 65

* Is supplied erected, with black conductive and convoluted foam.

Dissipative pink convoluted foam for PCB boxes

Item No. 1600859 1600864 1600866 1600851 1600867 1601339 1600854 Size in mm 100 x 55 x 10 183 x 127 x 20 250 x 191 x 20 267 x 216 x 20 300 x 300 x 20 380 x 280 x 20 420 x 220 x 20

4

ESD PROTECTIvE PACkAGING

Cortronic storage boxes

Item No. 1603569 1601216 1603570 1601217 1603571 1601218 1601219 1603572 Inside dimension in mm 180 x 62 x 65 285 x 150 x 110 292 x 109 x 122 580 x 65 x 65 592 x 109 x 122 590 x 200 x 180 592 x 153 x 70 615 x 100 x 130

Cortronic Tube boxes for shipment and storage of IC tubes

Item No. 1603568 1601435 Inside dimension in mm 600 x 95 x 45 590 x 95 x 95

44

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Cortronic Shielding Corrugated Carton

Cortronic partitioned containers, with lid, for storage, transport and production of PCB's

Item No. 1603623 1603630 1603624 Inside dimension in mm 270 x 169 x 195 372 x 388 x 84 386 x 386 x 176 Compartment L x B x H in mm 130 x 24 x 195 265 x 24 x 195 109 x 18 x 84 165 x 18 x 84 110 x 30 x 175 168 x 30 x 175 340 x 30 x 175 353 x 30 x 175 168 x 35 x 350 340 x 35 x 350 178 x 18 x 280 365 x 18 x 280 117 x 22 x 280 238 x 22 x 280 178 x 45 x 166 360 x 45 x 166 123 x 24 x 150 165 x 24 x 150 250 x 24 x 150 515 x 24 x 150 123 x 24 x 325 165 x 24 x 325 250 x 24 x 325 515 x 24 x 325 No partitions No partitions No. of compartments 12 6 60 40 30 20 10 10 18 9 22 11 30 15 20 10 44 33 22 11 44 33 22 11 No. of partitions trans 1 19 19 4 3 2 2 8 8 3 2 16 6 9 9 5 4 3 2 5 4 3 2 No. of partitions long 5 5 4 3 9 9 9 9 3 2 10 10 3 2 3 2 10 10 10 10 10 10 10 10

1603625 1603626

386 x 386 x 358 424 x 272 x 281

1603627 1603628

493 x 390 x 166 562 x 355 x 150

1603629

562 x 355 x 329

1603671 1603672

562 x 355 x 150 562 x 355 x 329

4

ESD PROTECTIvE PACkAGING

Cortronic trays, stackable

Item No. 1601429 1603641 1603642 1601430 1601431 1601432 Inside dimension in mm 297 x 230 x 28 297 x 230 x 55 305 x 243 x 40 499 x 330 x 28 499 x 330 x 40 499 x 330 x 70

Can also be supplied with 1,5 mm dissipative pink PE foam

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

45

E S D P R O T E C T I V E PA C K A G I N G

Cortronic Shielding Corrugated Carton

The Customer-Store-Container is made of ESD safe corrugated carton and complies with IEC 61340-5-1. Ergonomic, very economic and environmental friendly, the Customer Store Container is an important logistic component for the electronics industry. The specially designed conductive stacking devices make the Customer Store Container well stackable. With its moisture resistant coating the Customer Store Container can be used as storage container without the necessity of further repacking. Damage and errors which may occur with every handling will be minimized. All articles except the 550x365x400 mm size are available in red, green, blue and black colours. The colours make identification of different flows ­ such as red reject containers- or alignment with corporate colours easy. The Customer Store Container can be re-used many times. Moreover, it is completely recyclable. Because of the interesting cost aspects the Customer Store Container features an economic means of packaging to the electronic industry as well as an essential component for innovative logistics. Customer Store Container: ­ ESD protective

Customer Store Container Lid

Item No. 1603644 1602061 Inside dimension in mm 392 x 281 x 30 581 x 392 x 40

Customer Store Container

Item No. 1603645 1603646 1603647 1603648 1603649 1603650 1601984 1603651 1603097 1602871 Inside dimension in mm 362 x 251 x 60 362 x 251 x 100 362 x 251 x 139 362 x 251 x 220 551 x 362 x 60 551 x 362 x 100 551 x 362 x 139 551 x 362 x 172 551 x 362 x 220 550 x 365 x 400

Partitions for the Customer Store Container

Item No. 1603653 1603654 1603655 1603656 1603657 1603658 1603659 1603660 1603661 1603662 1603663 1603664 1603665 1603666 1603667 1603668 1603669 1603670 Type Short partition Long partition Short partition Long partition Short partition Long partition Short partition Long partition Short partition Long partition Short partition Long partition Short partition Long partition Short partition Long partition Short partition Long partition Size in mm 249 x 60 360 x 60 249 x 100 360 x 100 249 x 139 360 x 139 249 x 220 360 x 220 360 x 60 549 x 60 360 x 100 549 x 100 360 x 139 549 x 139 360 x 172 549 x 172 360 x 220 549 x 220

4

ESD PROTECTIvE PACkAGING

­ RS: 107-8 ohms ­ lightweight, strong and stackable ­ economic transport container ­ also to be used as storage container ­ re-usable ­ meets IEC 61340-5-1

46

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Cortronic Shielding Corrugated Carton

Multibox

Item No. 1603024 1603025 1603026 1603027 Inside dimension in mm 365 x 269 x 109 565 x 365 x 109 565 x 365 x 209 565 x 365 x 309

Multibox Inside Lid

Item No. 1603246 1603248 Inside dimension in mm 363 x 267 563 x 363

Multibox Lid

Item No. 1601807 Inside dimension in mm 593 x 393 x 50

50

Plastic Conductive Containers

Conventional plastic containers are ideal to be used as a method of transport and storage in the mechanical industry; however they are not suitable for the electronic industry. Our Plastic Conductive Containers has the characteristics to impede the formation of electrostatic charges or to discharge them. ­ black conductive polypropylene copolymer ­ RS < 104 ohms (DIN 53482)

1603279 1602670 1603282 1602387 1602398 1603283 1603284 1603285 1603073 1603287 1603288 1601997 1601726 1601996 1602374 1601714

50 0 2

Plastic Conductive Containers

Item No. Outside dimension in mm 300 x 200 x 120 300 x 200 (lid) 400 x 300 x 55 400 x 300 x 78 400 x 300 x 120 400 x 300 x 170 400 x 300 x 220 400 x 300 x 325 400 x 300 (lid) 600 x 400 x 78 600 x 400 x 120 600 x 400 x 170 600 x 400 x 220 600 x 400 x 325 600 x 400 x 430 600 x 400 (lid) Inside dimension 0 in5mm 260 x 160 x 100

20 20

335 x 255 x 35 355 x 255 x 58 355 x 255 x 100 355 x 255 x 150 355 x 255 x 200 355 x 255 x 305

4

ESD PROTECTIvE PACkAGING

555 x 355 x 58 555 x 355 x 100 555 x 355 x 150 555 x 355 x 200 555 x 355 x 305 555 x 355 x 410

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

47

E S D P R O T E C T I V E PA C K A G I N G

Conductive Corrugated PP

There is a wide range of thicknesses and density which, together with the ability to produce this material with conductive characteristics, enables a high degree of customization. ­ durable & reusable ­ moisture and water resistant ­ clean and washable ­ 100% recyclable ­ lightweight ­ Rs <105 ohms ­ thickness: 2 to 14 mm ­ density: 250 to 3.000 g/m2

Vacuum Thermoformed Trays

Vacuum Thermoformed Trays are designed to pack and handle a wide range of ESD sensitive products. The tray can be designed with the exact material, gauge and customized design, to adapt

4

ESD PROTECTIvE PACkAGING

to mechanical and ESD protection requirements. ­ materials used: PS, PET, ABS, HDPE ­ thickness: from 0.4 mm to 6.5 mm ­ available in Dissipative; Conductive and Cleanroom

48

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Conductive Pallets

ESD events affect the electronics packaging industry at all levels of production. The Conductive pallets provide effective protection for handling electronic components in assembly, storage and processing areas. ­ Rs: 104 ohms ­ black colour ­ fully closed or open deck

Conductive Pallets

Item No. 1603953 1603954 Size in mm 1200 x 800 1200 x 800 Description HDPE - Hygienic Version HDPE - Pool Version

1603954

1603953

ESD Airpad

ESD Airpad is made from two rolls of flat film which are inflated with air, heat sealed and perforated. A good solution for applications where blocking & filling for ESDS devices is needed. ­ RS: 109 to 1011 ohms ­ maximum product protection ­ lightweight ­ environment friendly

ESD Airpad

Item No. 1600206 Size in mm 420 x 160

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

49

E S D P R O T E C T I V E PA C K A G I N G

Membrane Boxes

Delicate objects can safely be packed in the patented membrane boxes. Whether the objects are round, pointed, oddly-shaped or of various sizes, the membrane box is safe and protects the objects against oxidation. The transparent packaging makes easy visual checking possible. A single membrane box consists of two halves. They are made from polystyrene, fitted with a very thin polyurethane membrane. The packaged items are freely suspended between both membranes. Boxes can be closed by hinges and clasps. ­ made of polystyrene ­ dissipative version available ­ Cleanroom version available ­ reusable

Membrane Boxes

Item No. 1601516 1601518 1601530 1602385 1602388 1602389 1602680 1602749 1602750 1602818 1602879 1602880 1602881 1602882 1602883 1602884 1602885 1602911 1604616 1604617 1601567 1601727 1601517 1601519 1601547 1601692 1602908 Size in mm (length x width x half height) 100 x 100 x 25 100 x 50 x 8 150 x 150 x 25 200 x 200 x 25 150 x 100 x 37,5 250 x 200 x 50 125 x 125 x 25 175 x 75 x 25 100 x 75 x 25 150 x 150 x 50 200 x 175 x 87,5 200 x 200 x 75 200 x 200 x 100 225 x 200 x 100 250 x 200 x 50 250 x 200 x 100 275 x 200 x 75 125 x 125 x 12,5 150 x 150 x 12,5 150 x 100 x 8 125 x 125 x 12,5 39 x 39 x 17,8 (total height) 150 x 150 x 50 200 x 150 x 25 100 x 75 x 12,5 39 x 39 x 17,8 (total height) 125 x 125 x 25 Description Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Cleanroom Dissipative Dissipative

4

ESD PROTECTIvE PACkAGING

50

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

E S D P R O T E C T I V E PA C K A G I N G

Cleanroom Packaging

The electronic industry increasingly uses Cleanroom flexible packaging in the manufacture of wafers, chips, diskdrives and MR heads. This packaging must be sealable, should hold a vacuum and should act as a barrier against outside threats. One problem typically seen in the Cleanroom is the generation of static charges through tribocharging, both on the packaging film and the product being packed. Static charges on the material can lead to electrostatic attraction of particulate to the material and the product. Therefore dissipative materials and/or ionization may be required for product protection. Available Cleanroom films as polyethylene and a number of laminates such as Static Shielding and Dry packaging barriers. Those films can be supplied as tubing, sheeting, bags and shrouds.

50 25 10 1 Cleanliness Particle size (m) Maximum allowable concentration limits for particles of stated size and larger Particles per 0.1 m2 of surface area or 0.1 liter of gas or liquid (N) 1 2.8 2.3 1 8.4 6.9 2.9 1 53.1 22.7 3.3 1 166 24.6 7.2 1 1780 264 78.4 10.7 1

1 1

5

2 5 1 2 5 10 2 5 15 25 5 15 25 50 5 15

100

25 50 10

Cleanroom Packaging

Item No. 1601673 1602259 1602572 1602182 1601939 1601940 1602211 1602212 1602925 1602183 1601955 1602073 1601680 1601752 1603956 1603904 1601094 1604091 Description Transparent LDPE Bag Transparent LDPE Bag Transparent LDPE Bag Transparent LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Dissipative LDPE Bag Static Shield Bag Transparent LDPE Roll Transparent LDPE Roll Transparent LDPE Roll Dissipative LDPE Sheeting Static Shield Roll Size 360 x 750 mm ­ 150 m 170 x 400 mm ­ 150 m 170 x 200 mm ­ 150 m 400 x 500 mm ­ 100 m 406 x 645 mm ­ 150 m 610 x 945 mm ­ 150 m 380 x 450 mm ­ 150 m 203 x 254 mm ­ 150 m 152 x 203 mm ­ 150 m 85 x 130 mm ­ 150 m 1.000 x 1.200 mm ­ 80 m 1.200 x 1.400 mm ­ 80 m 1.000 x 1.200 mm ­ 80 m 1.372 mm x 152 m ­ 150 m 140 mm x 250 m ­ 100 m 100 mm x 250 m ­ 100 m 1.520 mm x 152 m ­ 100 m 1.400 mm x 300 m ­ 80 m

4

ESD PROTECTIvE PACkAGING

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

51

I O N I Z AT I O N E Q U I P M E N T

5

IONIzATION EqUIPMENT

Ionization Equipment

Air ionization complements and completes any program that intends to eliminate all electrostatic charge sources. In many areas, such as Cleanrooms and mini environments, air ionization is the only practical method of static control. Ionization can neutralize static charges on insulative materials which cannot be grounded and can be considered as the safety net for effective ESD Control.

52

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

I O N I Z AT I O N E Q U I P M E N T

Ionization Equipment

Aerostat PC Aerostat XC Aerostat Guardian Top Gun 54 54 55 55

5

IONIzATION EqUIPMENT

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

53

I O N I Z AT I O N E Q U I P M E N T

Aerostat PC

The Aerostat PC provides superior static charge decay rates over a targeted work surface area. Small, quiet, and lightweight, yet uncompromising in performance, the Aerostat PC is easy to position. It is designed to provide optimum protection from the destructive effects of ESD and to prevent contaminants from being attracted to surfaces. The Aerostat PC features variable fan speed control and patented emitter point cleaner for easy maintenance. A status light verifies the presence of ionization. Typical applications: electronics assembly, medical device assembly and packaging, semiconductor and disk drive manufacturing. ­ air volume min. 1000 l/min., max. 2000 l/min. ­ heated air temperature in relation to ambient air: + 14° C at low fan speed, + 6° C at high fan speed ­ effective coverage 30 x 150 cm ­ discharge time 1,5 sec.

Aerostat PC

Item No. 1600869 Description Aerostat PC

­ ozone production 0,005 ppm ­ audible noise at low fan speed 50 dB, at high fan speed 57 dB ­ size 14 x 21 x 8 cm ­ weight 2,4 kg

Aerostat XC

The Aerostat XC provides excellent coverage, stability of balance and rapid static charge decay times. The Aerostat XC can be used in a variety of electronics environments, including Cleanrooms. The Aerostat XC features patented emitter point cleaner, an ionization status light, and an integrated heater. The Aerostat XC operates on AC technology to provide stable balance performance over time. Typical applications: electronics assembly, medical device parts assembly and packaging, disk drive manufacturing. ­ 3-speed fan ­ air volume min. 2000 l/min., medium 2700 l/min., max. 3.500 l/min. ­ heated air temperature in relation to ambient air: + 6° C at low fan speed, + 5° C at medium fan speed, + 4° C at high fan speed ­ effective coverage 90 x 180 cm ­ discharge time 1 sec. ­ ozone production 0,005 ppm ­ audible noise at low fan speed 52 dB, at medium fan speed 58 dB, at high fan speed 64 dB ­ adjustable mounting bracket ­ size 40 x 11 x 20 cm ­ weight 7,9 kg

Aerostat XC

Item No. 1600870 Description Aerostat XC

5

IONIzATION EqUIPMENT

54

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

I O N I Z AT I O N E Q U I P M E N T

Aerostat Guardian

The Aerostat Guardian provides superior static charge decay efficiency over an entire worksurface area. Equipped with task lighting and an integrated heater, the guardian offers user-friendly operation while effectively protecting sensitive components from ESD damage. Featuring patented inherent balance and built-in emitter point cleaners, the guardian is the lowest maintenance overhead ionizer available. Typical applications: disk drive manufacturing, medical device parts assembly and packaging, semiconductor manufacturing. ­ air volume min. 4500 l/min., max. 9000 l/min. ­ heated air temperature in relation to ambient air: + 14° C at low fan speed, + 6° C at high fan speed ­ effective coverage 60 x 120 cm ­ discharge time 3 sec. ­ ozon production 0,02 ppm ­ audible noise at low fan speed 50 dB, at high fan speed 60 dB ­ on/off switch with mains voltage indication ­ size 109 x 10 x 17 cm Aerostat PC, Aerostat XC and Aerostat Guardian ­ 230 V, 50 Hz. ­ heat with on/off switch ­ ion balance 0 V +/- 5 V ­ discharge time measured according to ANSI/ESD S.3.1, at fan speed high and in the center of the ionizer ­ calibration not necessary ­ patented emitter point cleaner ­ ionization light ­ operate on AC technology to provide stable balance performance over long periods of use ­ CE compliant ­ weight 5,7 kg ­ also available in Cleanroom version

Aerostat Guardian

Item No. 1600865 Description Aerostat Guardian

Top Gun

The Top Gun is a high-performance ionizing air gun designed for electronics and Cleanroom applications. The Top Gun features high blowoff force to provide efficient cleaning and rapid static charge decay. A filter at the exit of the gun ensures that the air is clean. ­ 230 V, 50/60 Hz., 0,05 A ­ flow 68 l/min. at 2 bar, 130 l/min. at 4 bar, 210 l/min. at 7 bar ­ filter 0,01 micron, ensures air is clean ­ blow-off force 180 g/cm2, 7 bar, 76 mm, Ø 51 mm target ­ ion balance 0 V +/- 15 V ­ discharge time 1,3 sec., 15 cm, 2 bar and 0,5 sec., 5 cm, 4 bar (1000 V - 100 V) ­ ozone production 0,001 ppm, measured at 450 mm from Top Gun, 1 bar ­ audible noise 76 dB at 2 bar, 89 dB at 4 bar and 97 dB at 7 bar, measured at 60 cm from the nozzle ­ ionization indicator light ­ cable 213 cm or 426 cm long

Top Gun

Item No. 1601040 1601041 1601720 Version cable 213 cm cable 426 cm Top Gun Sidekick

­ Top Gun Sidekick for "hands free" working ­ weight Top Gun and cable 213 cm long, 0,185 kg, weight control module 2,7 kg ­ size control module 13,2 x 16,4 x 8,5 cm ­ max. pressure 7 bar (CDA or dry nitrogen) ­ CE compliant

5

IONIzATION EqUIPMENT

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

55

TEST EQUIPMENT

Test and Measuring Equipment

In order to have an effective ESD Control Program continuous testing and measuring is important. We have a wide range of test equipment to verify the correct functioning of static control systems.

6

TEST EqUIPMENT

56

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

TEST EQUIPMENT

Test and Measuring Equipment

Static Locator Static Field Meter Surface Resistance Meter Surface Resistance Kit Concentric Ring Probe Ionizer Performance Analyzer 58 58 59 59 60 60

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

57

6

TEST EqUIPMENT

TEST EQUIPMENT

Static Locator

The Static Locator measures instantly and reliably whether static charges are present, how much and in which polarity ­ measures charges from 0 - 30 kV ­ accuracy +/- 10% ­ designed for close in repetative readings (± 1%) ­ supplied with a carrying case ­ CE compliant

Static Locator

Item No. 1601047 Size in cm 11,1 x 6,7 x 3,3

Static Field Meter

The FMX-003 is a convenient, compact and pocketsize electrostatic Field Meter. With this Field Meter you can measure and store the field strength and polarity. It enables you to carry out measurements in awkward places. The correct measuring distance is displayed by two integrated LED's. The electrically conductive plastic housing with an earth connection fitted at the side ensures accurate measurements. ­ digital and bar graph display indicates field polarity and intensity ­ battery condition display ­ easy plate attachment for ion balance measurement ­ auto shut off after 5 minutes ­ portable and lightweight ­ auto-ranging digital display ­ includes conductive ABS case, coil cord for grounding and adapter for ion balance measurements.

Static Field Meter FMX-003

Item No. 1601046 Description Static Field Meter

6

TEST EqUIPMENT

58

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

TEST EQUIPMENT

Surface Resistance Meter

The Surface Resistance Meter is appropriate for auditing static control items. Measures conductive, dissipative and insulative items. The meter is battery powered and simple to use. ­ measures surface resistance and resistance to ground ­ uses parallel metal electrodes ­ ranges 103-12 ohms ­ accuracy +/- 10% ­ uses a 9 V alkaline battery ­ supplied with a carrying bag ­ CE compliant ­ Complies with IEC 61340-5-1

Surface Resistance Meter

Item No. 1600964 Size in cm 13 x 7 x 2,5

Surface Resistance Kit

The Surface Resistance KIT contains all the needed components to make testing to ESD packaging and mats surfaces simple and accurately. ­ measures surface resistance, resistance to ground and point to point resistance ­ comes with two 2,5 kg electrodes or a Concentric Ring Probe ­ ranges 103-13 ohms ­ analog display ­ LED's for quick reference of conductive, dissipative and insulative ­ automatic ranging of test voltage: 10 V for conductive surfaces, 100 V for dissipative surfaces ­ override switch can be used for measuring at 10 V only ­ accuracy +/- 10% ­ uses a 9 V alkaline battery ­ indicator light for low battery ­ supplied in a metallic/conductive case ­ complies with IEC 61340-5-1 ­ CE compliant

Surface Resistance Kit

Item No. 1603393 1604461 Version With two electrodes With Concentric Ring Probe

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

59

6

TEST EqUIPMENT

TEST EQUIPMENT

Concentric Ring Probe

The Concentric Ring Probe is the ideal equipment to measure the surface resistance of packaging material. ­ measures surface resistance according to IEC 61340-5-1 ­ can be used in combination with the Surface Resistance Kit ­ weight 2,5 kg ­ inside diameter electrode 30 mm +/- 0,5 mm ­ outside diameter electrode 57 mm +/- 0,5 mm

Concentric Ring Probe

Item No. 1600962 Description Concentric Ring Probe

Ionizer Performance Analyzer

The Ionizer Performance Analyzer is a low-cost and highly portable alternative to a chargedplate monitor for periodic verification of ionizer performance. It permits ionizer testing at the work location without the need to remove the ionizer from service for testing. - manual or automated tests - optional 6-inch plate attachment (Model 287/22C) achieves1:1 correspondence with standard chargedplate monitor test results - integral temperature and relative humidity sensors to capture environmental data during test - test results correlate to standard tests performed using a charged-plate monitor in accordance with ESD Association standard S3.1 - integrates decay timer lacking in ionizer test kits for Field Meters

Ionizer Performance Analyzer

Item No. 1601051 Description Ionizer Performance Analyzer

6

TEST EqUIPMENT

60

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

Addresses

SWEDEN Common for all units in Sweden: Tel: +46(0)771-590 000 Internet: www.nefab.se www.nefab.com HEAD OFFICE NEFAB AB Box 2184, SE-550 02 JÖNkÖPING visiting address: Slottsgatan 14 Fax: +46(0)36-15 04 44 E-mail: [email protected], [email protected] BELGIUM NEFAB Packaging Belgium N.V. Skaldenstraat 121, F1, Harbour 3230 9042 DESTELDONk (GENT) Tel: +32(0)9 231 82 82 Fax: +32(0)9 231 82 39 Internet: www.nefab.be E-mail: [email protected] DENMARK NEFAB Danmark A/S köbenhavnsvej 69, Dk-4000 ROSkILDE Tel: +45 43 54 30 13 Fax: +45 43 54 30 73 Internet: www.nefab.dk E-mail: [email protected] ESTONIA NEFAB Eesti AS killustiku 6, 75303 Lagedi, Rae vald HARJUMAA Tel: +372-634 9800 Fax: +372-634 9801 Internet: www.nefab.ee E-mail: [email protected] FINLAND Oy NEFAB AB Sienitie 5 FI-00760, HELSINkI Tel: +358 10 830 1100 Fax: +358 10 830 1101 Internet: www.nefab.fi E-mail: [email protected] FRANCE NEFAB Packaging France S.A.S RN 20 Nord, F-41300 SALBRIS Tel: +33(0)2 54 96 82 55 Fax: +33(0)2 54 96 35 77 Internet: www.nefab.fr E-mail: [email protected] GERMANy NEFAB Packaging Germany GmbH Raiffeisenstraße 10, 71696 MÖGLINGEN Tel: +49 7141 49 00 40 Fax: +49 7141 49 00 42 Internet: www.nefab.de E-mail: [email protected] GREAT BRITAIN NEFAB Packaging U.K. Ltd 151 Silbury Boulevard, MILTON kEyNES, Mk9 1LH Tel: +44-(0)1908-424 300 Fax: +44-(0)1908-424 301 Internet: www.nefab.co.uk E-mail: [email protected] HUNGARy NEFAB Packaging Hugary Kft. könyves kálman krt. 76 1087 BUDAPEST Tel: +36 1 210 1487 Fax: +36 1 459 07 32 Internet: www.nefab.hu E-mail: [email protected] ITALy NEFAB SRL via Magretti 22 200 37 Paderno Dugnano MILAN Tel: +39-02 99048520 Fax: +39-02 99048521 Internet: www.nefab.it E-mail: [email protected]

NEFAB Packaging Sweden AB SE-822 81 ALFTA visiting address: Nordgrens väg 5 Fax: +46(0)271-590 10 E-mail: [email protected] NEFAB Production Runemo AB SE-822 81 ALFTA visiting address: Nordgrens väg 5 Fax: +46(0)271-590 10 E-mail: [email protected] NEFAB Logistics AB Box 7, SE-566 21 HABO visiting address: Snickargatan 10 Fax: +46(0)36-497 10 E-mail: [email protected] NEFAB PlyPak AB Box 7, SE-566 21 HABO visiting address: Snickargatan 10 Fax: +46(0)36-497 10 E-mail: [email protected] NEFAB LogPak AB Box 7, SE-566 21 HABO visiting address: Snickargatan 10 Fax: +46(0)36-497 30 E-mail: [email protected] NEFAB Specialemballage AB kraftleden, SE-746 40 BÅLSTA Fax: +46(0)171-509 69 E-mail: [email protected] NEFAB Supply HB SE-822 81 ALFTA visiting Address: Nordgrens väg 5 Fax: +46(0)271-590 50 E-mail: [email protected] NEFAB Teknik AB SE-822 81 ALFTA visiting Address: Nordgrens väg 5 Fax: +46(0)271-590 30 E-mail: [email protected]

EUROPE

AUSTRIA NEFAB Eder Verpackungstechnik GmbH Lastenstraße 38 ­ City Tower 1, A-4020 LINz Tel: +43/732-660602-0 Fax: +43/732-660602-20 E-mail: [email protected] Internet: www.nefab.at

N E FA B ­ T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S

|

W W W. N E FA B . C O M

61

NORWAy NEFAB Packaging Norway A/S Lersbrygga 16, N-3070 SANDE I vESTFOLD Tel: +47(0)33-78 58 50 Fax: +47(0)33-78 58 51 Internet: www.nefab.no E-mail: [email protected] POLAND NEFAB Packaging Poland Sp.zo.o ul. Malinowska 28, 83-100 TCzEW Tel: +48-58 7777 950 Fax: +48-58 7777 953 Internet: www.nefab.pl E-mail: [email protected] PORTUGAL NEFAB RA-Produtos de Embalagem, Lda Rua do Pinhal n.° 281/301, Lugar da Minhoteira 4470-640 MOREIRA DA MAIA Tel: +351 22 943 92 20 Fax: +351 22 942 80 10 Internet: www.nefab.pt E-mail: [email protected] ROMANIA NEFAB Packaging Romania SRL Str.Andrei Saguna no.3, bl.U5 ap.20, TIMISOARA Tel: +40.256.283423 Fax: +40.256.283423 E-mail: [email protected] Internet: www.nefab.com SLOVAKIA NEFAB Packaging Slovakia s.r.o. Industrial Park Gena Gena 5361/59 Sk-934 01 LEvICE Tel: +421 36 63 56 500 Fax: +421 36 63 56 517 Internet: www.nefab.sk E-mail: [email protected] SPAIN NEFAB S.A. Calle Gutenberg S/N, Pol. Ind. El Lomo Getafe, 28906 MADRID Tel: +34-91-696 6911 Fax: +34-91-696 7442 Internet: www.nefab.es E-mail: [email protected] Mediterranean Goods S.A. Packaging c/ Lincoln n°11 ático 4a 08006 BARCELONA Tel: +34 93-237 11 25 Fax: +34 93-419 16 28 Internet: www.medgoods.es E-mail: [email protected] NEFAB Plywood Pontevedra, S.L. Ctra. de Barbudo s/n 36828 PONTE CALDELAS (PONTEvEDRA) Tel: +34 986 75 01 50 E-mail: [email protected] THE NETHERLANDS NEFAB Bijl B.V. visiting address: Hermesweg 28 Postbus 53, NL-3770 AB BARNEvELD Tel: +31(0)342-49 01 47 Fax: +31(0)342-41 68 45 Internet: www.nefab.nl E-mail: [email protected]

NORTH & SOUTH AMERICA

BRAZIL NEFAB Embalagens Ltda. Rod. Regis Bittencourt, Rodoanel Estrada São Judas 35 Jardim das Oliveiras 06817-170 EMBÚ, SÃO PAULO SP Tel: +55(0)11 4785-5050 Fax: +55(0)11 4785-5051 Internet: www.nefab.com.br E-mail: [email protected] CANADA NEFAB Inc. (Canada) 211 Jameson Drive PETERBOROUGH, Ontario k9J 6X6 Tel: +1 705-748-4888 Fax: +1 705-748-0034 Internet: www.nefab.ca E-mail: [email protected] USA NEFAB, Inc. (USA) 3105 N. Ashland Avenue, #394 CHICAGO, IL 60657 Tel: +1-800-565-0901 Fax: +1 705 748 0034 Internet: www.nefab.us E-mail: [email protected]

ASIA

CHINA Common for all units in China: Internet: www.nefab.com.cn E-mail: [email protected] NEFAB Asia Pacific Office ­ Shanghai, China Add: No.158, Guiqiao Road, Jinqiao Export Processing zone, PuDong, Shanghai P.R China 201206 Tel: +86 21 5899 5218 Fax: +86 21 5899 5303 NEFAB Packaging Engineering (WuXi) Co.,Ltd Add: No.16 Xing Chuang Road 4, Wuxi-Singapore Industrial Park, Wuxi, Jiangsu Province P.R. China 214028 Tel: +86 510 8295 2288 / 0510 8520 0310 Fax: +86 510 8520 0402 NEFAB Packaging Engineering (Wuxi) Co., Ltd. Wuxi SU CPS Address: ChunMing Industrial Park, XinMing Road, Fang qian Town, Wuxi, Jiangsu Province P.R. China 214028 Tel: +86 510 8865 1832 Fax: +86 510 8865 1820 NEFAB Packaging Engineering (Wuxi) Co., Ltd. Shanghai Sales Office Add: No.158,Guiqiao Road,Jinqiao Export Processing zone, PuDong,Shanghai P.R China 201206 Tel: +86 21 5899 5218 Fax: +86 21 5899 5303 NEFAB Packaging Engineering (Wuxi) Co., Ltd. HangZhou Sales Office Add: Room110 1# zhongheng Science Park, No.4028 Nanhuan Road, Binjiang District, Hangzhou, P.R China 310053 Tel: +86 571 8669 1140 Fax: +86 571 8669 1141 NEFAB Packaging Engineering (Wuxi) Co., Ltd. SuZhou Sales Office Add: Room315 Bailing Commercial Center, No.168 Xinghai Street,Suzhou Industrial Park, Suzhou, P.R China 215021 Tel: +86 512 6295 0715 Fax: +86 512 6296 0717

LangFang NEFAB Packaging Engineering Co.,Ltd Add: No.28, No 2 Road, Langfang Economy & Technology Development zone, P.R China 065001 Tel: +86 316 597 7008 Fax: +86 316 597 7010 Langfang NEFAB Packaging Engineering Co., Ltd Beijing Sales Office Add: Room C112 Lonsdale Center, 5 Wanhong Road, Chaoyang District, Beijing, P.R. China 100015 Tel: +86 10 6433 2618 Fax: +86 10 6434 5773 Langfang NEFAB Packaging Engineering Co., Ltd TianJin Sales Office Add: Room 312, Fengnian village Community Services Center, Dongli District, Tianjin, P.R. China 300300 Tel: +86 22 2497 4172 Fax: +86 22 2497 4172 NEFAB Packaging Engineering (DongGuan) Co., Ltd Add: Sanheng Road - turn in by Shuilang Road, DaTang village, DaLingShan Town, Dongguan, Guangdong, P.R.China, 523837 Tel: +86 769 8278 4111 Fax: +86 769 8278 4110 NEFAB Packaging Engineering (DongGuan) Co., Ltd ­ Zhuhai Sales office Add: Room 3-301, building No.7, C part of Riviera Residential community, Doumen area, zhuhai, Guangdong,P.R.China, 519180 Tel: +86 756 5311 001/5311 002 Fax: +86 756 5311 009 NEFAB Packaging Engineering (DongGuan) Co., Ltd ­ BaoAn Office Add: Taifeng Building 702B, qianjin Road, Xin'an Street, Baoan, Shenzhen,GuangDong, P.R.China, 518101 Tel: +86 755 2775 0617 Fax: +86 755 2775 1047 NEFAB Packaging Engineering(DongGuan)Co., Ltd ­ GuangZhou Office Add: Room1201, F, DongJing Park, yuanCunErHeng Road,TianHe Strict, Guangzhou, GuangDong,P.R.China, 510655 Tel/Fax: +86 20 8554 9055 INDIA NEFAB India Private Ltd. 401, Galleria Building, 4th floor, 'A' Wing, Hiranandani Gardens, Powai, Mumbai - 400 076 Tel: +91-22 67108862 Fax: +91-22 67108861 Internet: www.nefab.com E-mail: [email protected] NEFAB India Private Ltd. Production Site: 277-278, Sector 7, IMT, Manesar Gurgaon- 122 050 Tel: +91 (0) 124 4368622 Fax: +91 (0) 124 4368621 MALAySIA NEFAB (Malaysia) Sdn Bhd No. 201, Block A4, Leisure Commerce Square, No. 9, Jalan PJS 8/9, 46150 Petaling Jaya, Selangor, Malaysia. Tel: +603 78773178 Fax: +603 78773198 SINGAPORE NEFAB Singapore Pte Ltd No.8, Tuas view Loop Singapore 637674 Tel: +65 862 0178 Fax +65 861 9628 E-mail: [email protected] Internet: www.nefab.com

REPRESENTATIVE OFFICES

CZECH REPUBLIC NEFAB Packaging Slovakia s.r.o. Representative Office Czech Republic k vypichu 1086 252 19 RUDNá U PRAHy Tel: +420 311 512 986/990 Fax: +420 311 513 061 Internet: www.nefab.cz E-mail: [email protected] RUSSIA NEFAB Supply HB Representative Office Italyanskava 5, 191 186 ST. PETERSBURG Tel: +7 812 346 73 12 Fax: +7 812 346 73 16 Internet: www.nefab.com E-mail: [email protected] THAILAND NEFAB in Thailand 16/3, 16th Floor vibhavadi Tower 51/3, Ngamwongwan Road, Chatchuchak, BANGkOk 10900 Tel: +66 2 941 2868 Fax: +66 2 941 2869 E-mail: [email protected] Internet: www.nefab.com VIETNAM NEFAB in Vietnam N28-D2 Street van Thanh Bac, Ward 25, Binh Thanh District HO CHI MINH CITy Tel: +84 (0)8 898 3032 Fax: +84(0)8 898 2252 E-mail: [email protected] Internet: www.nefab.com

COOPERATIVE PARTNERS

AUSTRALIA Integra Packaging Pty Ltd 70 Meroo Road BOMADERRy, NSW 2541 Tel: +61 (0) 2 4421 2935 Fax: +61 (0) 2 4423 1437 Internet: www.integrapackaging.com Email: [email protected] JAPAN Ailop Corp. 3-6-9 Tsukamoto yodogawa-ku. OSAkA 532 Tel: +81 (0)6 6308 5847 Fax: +81 (0)6 6300 1259 Internet: www.ailop.co.jp MEXICO Madereria Del Bajío, S.A. de C.V. Privada de la Concordia No. 3 zona Industrial La Montana, C.P. 76150 querétaro, qUERÈTARO Telephone: +52-44-221 70138 Fax: +52-44-221 73096 SOUTH KOREA Cape Industries Ltd. CAPE Bldg 52-9 Namsang Dong kumjung-ku, PUSAN Tel: +82(0)51 583 9169 Fax: +82(0)51 583 9168 Internet: www.capeind.com E-mail: [email protected] SWITZERLAND Egolf Verpackungs AG Brüelhalde 1, CH-8370 SIRNACH Tel: +41(0)71-969 4100 Fax: +41(0)71-969 4101 Internet: www.egolfverpackungsag.ch E-mail: [email protected]

WWW.NEFAB.COM

Information

63 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

369105