Read Steel_standards.mdi text version

STANDARDILUETTELO

Tarkistuspäivämäärä

1(15)

12.10.2006

Kpl

Standardin numero

Vahvistus- Otsikko pvm

Voimassa

Uusi/korvaava standardi

STANDARDS FOR THE MATERIALS

1 2 3 4 5 6 7 EN 10204 EN 10079 EN 10027-1 EN 10027-2 EN 10056-1 EN 10056-2 EN 10025 2004-10 1992-10 2005-08 1992-07 1998-08 1993-09 1990-03 Metallic products.Types of inspection documents Definition of steel products Designation systems for steel. Part 1: Steel names, principal symbols Designation systems for steel. Part 2: Numerical system Structural steel equal and unequal leg angles Part 1: Dimensions Structural steel equal and unequal leg angles Part 2: Tolerances on shape and dimensions Hot rolled products of non-alloy structural steels. Technical delivery conditions X X X X X X EN 10025-1:2004 Hot rolled products of structural steels. Part 1: General technical delivery conditions EN 10025-2:2004 Hot rolled products of structural steels. Part 2: Technical delivery conditions for non-alloy structural steels + Korjaus EN 10025-2/AC:2005 X X X X

8 9 10 11

EN 10029 EN 10051 EN 10034 EN 10163-1

1991-04 1997-09 1993-09 2004-12

Hot rolled steel plates 3mm thick or above. Tolerances on dimensions, shape and mass Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape Structural steel I and H section- Tolerances on shape and dimensions Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections Part 1: General requirements

STANDARDILUETTELO

Tarkistuspäivämäärä

2(15)

12.10.2006 Kpl 12 Standardin numero EN 10163-2 EN 10163-3 13 14 15 16 EN 10219-1 EN 10219-2 EN 10279 EN 10113-1 2003-02 2003-02 2000-01 1993-03 Vahvistus- Otsikko pvm 2004-12 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections Part 2: Plate and wide flats Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 1 : Technical delivery requirements Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 2 : Tolerances, dimensions and sectional properties Hot-rolled steel channels. Tolerances on shape, dimensions and mass Hot-rolled products in weld able fine grain structural steels X EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels 17 EN 10113-2 1993-03 Hot-rolled products in weld able fine grain structural steels EN 10025-1:2004 EN 10025-3:2004 18 EN 10113-3 1993-03 Hot-rolled products in weld able fine grain structural steels EN 10025-1:2004 EN 10025-4:2004 19 EN 10155 1993-06 Structural steels with improved athmospheric corrosion resistance. Technical delivery conditions EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance Voimassa Uusi/korvaava standardi

X EN 10219-1:2006-04 EN 10219-1:2006-04

STANDARDILUETTELO

Tarkistuspäivämäärä

3(15)

12.10.2006 Kpl 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 X Standardin numero ISO 4014 EN 24014 ISO 4017 EN 24017 ISO 4032 EN 24032 ISO 8992 ISO 7091 ISO 4759-1 EN 10130 + A1 ISO 898-1 ISO 898-2 ISO 898-5 ISO 898-6 ISO 898-7 Vahvistus- Otsikko pvm 1999-09 1991-10 1999-08 1991-10 1999-08 1991-10 2005-04 2000-06 2000-11 1998-09 1999-08 1992-11 1998-08 1994-12 1992-11 Hexagon head bolts. Product grades A and B Hexagon head bolts. Product grades A and B Hexagon head screws. Product grades A and B Hexagon head screws. Product grades A and B Hexagon nuts, style 1. Product grades A and B Hexagon nuts, style 1. Product grades A and B Fasteners. General requirements for bolts, screws, studs and nuts Plain washers. Normal series. Product grade C Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1: Bolts, screws and studs Mechanical properties of fasteners. Part 2: Nuts with specified proof load values. Coarse thread Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5: Set screws and similar threaded fasteners not under tensile stresses Mechanical properties of fasteners. Part 6: Nuts with specified proof load values. Fine pitch thread Mechanical properties of fasteners. Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm Voimassa X X X X X X X X X X X X X X X Uusi versio valmistunee joulukuussa 2006 Uusi/korvaava standardi

STANDARDILUETTELO

Tarkistuspäivämäärä

4(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm Voimassa Uusi/korvaava standardi

STANDARDS FOR THE WELDING PROCEDURE SPECIFICATION

36 37 38 39 40 41 42 43 EN 288-1 EN 288-2 EN 288-3 EN 288-5 EN 288-6 EN 288-7 EN 288-8 EN 29692 1992-02 1992-02 1992-02 1994-08 1994-08 1995-05 1995-05 1994-02 Specification and qualification of welding procedures for metallic materials Part 1: General rules for fusion welding Specification and qualification of welding procedures for metallic materials Part 2: Welding procedure specification for arc welding Specification and qualification of welding procedures for metallic materials Part 3: Welding procedure tests for the arc welding of steels Specification and qualification of welding procedures for metallic materials Part 5: Approval by using approved welding consumables for arc welding Specification and qualification of welding procedures for metallic materials Part 6: Approval related to previous experience Specification and qualification of welding procedures for metallic materials Part 7: Approval by a standard welding procedure for arc welding Specification and qualification of welding procedures for metallic materials Part 8: Approval by a pre-production welding test Metal- arc welding with covered electrode, gas-shielded metal-arc and gas welding. Joint preparations for steel EN ISO 15607:2003 EN ISO 15609-1:2004 EN ISO 15614-1:2004 EN ISO 15610:2003 EN ISO 15611:2003 EN ISO 15612:2004 EN ISO 15613:2004 EN ISO 9692-1:2003 Welding and allied processes. Recommendations for joint preparation. Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels X X X X + Lisäys A1:2002-09 + Lisäys A2:2004-02 + Korjaus EN ISO 9692-2/AC:1999

44 45 46 47

EN ISO 9692-2 EN ISO 13920 ENV 1090-1 SFS-EN 1011-1

1998-04 1996-08 1996-04 1998-08

Welding and allied processes. Joint preparations Part 2: Submerged arc welding of steels Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position Execution of steel structures Part 1: General rules and rules for buildings Welding. Recommendations for welding of metallic materials. Part 1: General guidance for arc welding

STANDARDILUETTELO

Tarkistuspäivämäärä

5(15)

12.10.2006 Kpl 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 Standardin numero SFS-EN 1011-2 SFS-EN 1011-3 SFS-EN 1011-4 SFS-EN 1011-5 SFS-EN 1011-6 SFS-EN 1011-7 SFS-EN 1011-8 SFS-EN 439 SFS-EN ISO 4063 SFS-EN ISO 6947 EN ISO 15607 CEN ISO/TR 15608 Vahvistus- Otsikko Voimassa pvm Welding. Recommendations for welding of metallic materials. Part 2: Arc 2001-05 X welding of ferritic steels Welding. Recommendations for welding of metallic materials. Part 3: Arc 2001-03 X welding of stainless steels Welding. Recommendations for welding of metallic materials. Part 4: Arc 2001-03 X welding of aluminium and aluminium alloys Welding. Recommendations for welding of metallic materials. Part 5: Welding 2003-12 X of clad steel Welding. Recommendation for welding of metallic materials. Part 6: Laser 2006-01 X beam welding Welding. Recommendations for welding of metallic materials. Part 7: Electron 2004-09 X beam welding Welding. Recommendations for welding of metallic materials. Part 8: Welding 2005-03 X of cast irons 1995-02 2000-05 1997-08 2003-12 2005-10 Welding consumables. Shielding gases for arc welding and cutting Welding and allied processes. Nomenclature of processes and reference numbers Welds. Working positions. Definitions of angles of slope and rotation Welding Specification and qualification of welding procedures for metallic materials. General rules Welding. Guidelines for a metallic materials grouping system Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 1: Arc welding Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 2: Gas welding Specification and qualification of welding procedures for metallic materials. Welding procedures specification. Part 3: Electron beam welding Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 4: Laser beam welding Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 5: Resistance welding X X X X X X X X X X Uusi/korvaava standardi + Lisäys A1:2004-02 + Lisäys A1:2004-02 + Lisäys A1:2004-02

SFS-EN ISO 15609-1 2004-11 SFS-EN ISO 15609-2 2002-03 SFS-EN ISO 15609-3 2004-09 SFS-EN ISO 15609-4 2004-09 SFS-EN ISO 15609-5 2004-09

STANDARDILUETTELO

Tarkistuspäivämäärä

6(15)

12.10.2006 Kpl 65 66 67 68 69 Standardin numero EN ISO 15610 EN ISO 15611 EN ISO 15612 EN ISO 15613 ISO 15614-1 Vahvistus- Otsikko pvm 2003-11 2003-12 2004-08 2004-06 2004-06 Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 2: Arc welding of aluminium and its alloys Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 4: Finishing welding of aluminium castings Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 5: Arc welding of titanium, zirconium and their alloys Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 8: Welding of tubes to tube-plate joints Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 10: Hyperbaric dry welding Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 11: Electron and laser beam welding Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 12: Spot, seam and projection welding Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 13: Resistance butt and flash welding Voimassa Uusi/korvaava standardi

X X X X + Corrigendum 1:2005 X + Corrigendum 1:2005

70 71 72

ISO 15614-2 ISO 15614-4 ISO 15614-5

2005-05 2005-07 2004-03

X X

X

73 74 75 76 77

ISO 15614-8: ISO 15614-10 ISO 15614-11 ISO 15614-12 ISO 15614-13

2002-04 2005-02 2002-03 2004-08 2005-02

X X X X X

STANDARDILUETTELO

Tarkistuspäivämäärä

7(15)

12.10.2006 Kpl 78 79 80 Standardin numero ISO 15614-6 EN ISO 14555 EN ISO 15620 Vahvistus- Otsikko pvm 2006-04 1998-10 2000-07 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 6: Arc and gas welding of copper and its alloys Welding. Arc stud welding of metallic materials Welding. Friction welding of metallic materials Voimassa Uusi/korvaava standardi

X X X Uusi versio valmistunee sysksyn aikana

STANDARDS FOR THE PREPARATION OF STEEL

81 82 83 ISO 9223 EN 10238 ISO 8501-1 1992-02 1996-09 1988-12 Corrosion of metals and alloys. Corrosivity of atmospheres. Classification Automatically blast-cleaned and automatically prefabrication primed structural steel products Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 3: Preparation grades of welds, cut, edges and other areas with surface imperfections X X Uusi versio ilmestynee lähiaikoina X

84

ISO 8501-2

1994-12

X

85

ISO 8501-3

2001-12

ISO 8501-3:2006-03 Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Part 3: Preparation grades of welds, edges and other areas with surface imperfections

86

ISO 8503-1

1988-02

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

X

STANDARDILUETTELO

Tarkistuspäivämäärä

8(15)

12.10.2006 Kpl 87 Standardin numero ISO 8503-2 Vahvistus- Otsikko pvm 1988-02 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 3: Method for the calibration of ISO reference comparators and for determination of surface profile. Focusing microscope procedure Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4: Method for the calibration of ISO reference comparators and for determination of surface profile. Stylus instrument procedure Preparation of steel substrates before application of paints and related products. Surface preparation methods. Part1: General principles Preparation of steel substrates before application of paints and related products. Surface preparation methods. Part 2: Abrasive blast cleaning Preparation of steel substrates before application of paints and related products. Surface preparation methods. Part 3: Hand- and power- tools cleaning Paints and varnishes. Evaluation of degradation of paint coatings. Destination of intensity, quantity and size of common types of defect Part 1: General principles and rating schemes Paints and varnishes. Evaluation of degradation of paint coatings. Destination of intensity, quantity and size of common types of defect Part 2: Designation of degree of blistering Paints and varnishes. Evaluation of degradation of paint coatings. Destination of intensity, quantity and size of common types of defect Part 3: Designation of degree of rusting Paints and varnishes. Evaluation of degradation of paint coatings. Destination of intensity, quantity and size of common types of defect Part 4: Designation of degree of cracking Voimassa Uusi/korvaava standardi

X

88

ISO 8503-3

1988-02

X

89

ISO 8503-4

1988-02

X

90 91 92

EN ISO 8504-1 EN ISO 8504-2 EN ISO 8504-3

2001-05 2001-05 2001-05

X X

X

93

ISO 4628-1

2003-09

X

94

ISO 4628-2

2003-09

X

95

ISO 4628-3

2003-09

X

96

ISO 4628-4

2003-09

X

STANDARDILUETTELO

Tarkistuspäivämäärä

9(15)

12.10.2006 Kpl 97 Standardin numero ISO 4628-5 Vahvistus- Otsikko pvm 2003-09 Paints and varnishes. Evaluation of degradation of paint coatings. Destination of intensity, quantity and size of common types of defect Part 5: Designation of degree of flaking Welding and allied processes. Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 1: General introduction Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 2: Classification of environments Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 3: Design considerations Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 4: Types of surface and surface preparation Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 5: Protective paint system Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 6: Laboratory performance test methods Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 7: Execution and supervision of paint work Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 8: Development of specifications for new work and maintenance Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area (ISO 1460:1992) Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines Voimassa Uusi/korvaava standardi

X + Lisäys A1:2003

98 99

EN ISO 9013 EN ISO 12944-1

2002-09 1998-05 1998-05 1998-05 1998-05 1998-05 1988-05 1998 1998-05

X X X X X X X X

100 EN ISO 12944-2 101 EN ISO 12944-3 102 EN ISO 12944-4 103 EN ISO 12944-5 104 EN ISO 12944-6 105 EN ISO 12944-7 106 EN ISO 12944-8

X

107 EN ISO 1460 108 EN ISO 1461 109 EN ISO 14713

1994-10 1999-02 1999-03

X X X

STANDARDILUETTELO

Tarkistuspäivämäärä

10(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm 1984-11 Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped). Product grades A and B. Property classes 5, 6 and 8 Paints and varnishes -- Determination of film thickness 1995-01 2000-03 1998-11 1996-12 Non-magnetic coatings on magnetic substrates. Measurement of coating thickness- Magnetic method Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness Paints and varnishes. Determination of film hardness by pencil test Paints and varnishes. Determination of resistance to neutral salt spray (fog) Voimassa Uusi/korvaava standardi

110 ISO 7413 111 ISO 2808 112 EN ISO 2178 113 EN ISO 2064 114 ISO 15184 115 ISO 7253

X X X X X ISO 9227:2006 Corrosion tests in artificial atmospheres.Salt spray tests X X X

116 SFS-EN ISO 4892-1 117 SFS-EN ISO 4892-2 118 SFS-EN ISO 4892-3

2001-01 2006-08 2006-08

Plastics. Methods of exposure to laboratory light sources. Part 1: General guidance Plastics. Methods of exposure to laboratory light sources. Part 2: Xenon-arc lamps Plastics. Methods of exposure to laboratory light sources. Part 3: Fluorescent UV lamps

STANDARDS FOR THE QUALITY REQUIRMENTS

119 EN 729-1 1994-09 Quality requirements for welding. Fusion welding of metallic materials. Part 1: Guidelines for selection and use EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials. Part 1: Criteria for the selection of the appropriate level of quality requirements EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials. Part 3: Standard quality requirements

120 EN 729-3

1994-09

Quality requirements for welding. Fusion welding of metallic materials. Part 3: Standard quality requirements

STANDARDILUETTELO

Tarkistuspäivämäärä

11(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm 1994-09 Quality requirements for welding. Fusion welding of metallic materials. Part 4: Elementary quality requirements Voimassa Uusi/korvaava standardi EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials. Part 4: Elementary quality requirements X EN 287-1:2004 Qualification test of welders. Fusion welding. Part 1: Steels + Korjaus AC:2004 + Lisäys A2:2006 X EN 473:2000 Non destructive testing. Qualification and certification of NDT personnel. General principles + Lisäys A1:2005

121 EN 729-4

122 EN 719 123 EN 287-1

1994-08 1992-02

Welding coordination. Tasks and responsibilities Approval testing of welders. Fusion welding. Part 1: Steels

124 EN 1418

1997-12

Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials Qualification and certification of NDT personel. General principles

125 EN 473

1993-01

STANDARDS FOR THE QUALITY LEVEL

126 EN 25817 1992-07 Arc-welded joints in steel. Guidance on quality levels for imperfection EN ISO 5817:2003 Welding. Fusionwelded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections + Korjaus AC:2006

STANDARDS FOR THE INSPECTION INSTRUCTION

127 EN 12062 128 EN 970 129 EN ISO 6520-1 1997-08 1997-02 1998-10 Non-destructive examination of welds. General rules for metallic materials Non­destructive examination of fusion welds. Visual examination Welding and allied processes. Classification of geometrical imperfections in metallic materials. Part 1 : Fusion welding X X X + Lisäys A1:2002 + Lisäys A2:2003

STANDARDILUETTELO

Tarkistuspäivämäärä

12(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm 1998-08 1997-08 1998-02 1998-02 1998-01 2006-03 1998-03 1998-12 1998-03 2002-09 2002-12 2002-09 2002-09 2002-09 2005-03 2002-05 1996-05 Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels Non destructive testing. Penetrant testing. Part 1: General principles Non-destructive examination of welds. Magnetic particle examination of welds Non-destructive examination of welds. Magnetic particle testing of welds. Acceptance levels Non-destructive examination of welds. Radiographic examination of welded joints Non-destructive testing of welds. Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels Non-destructive examination of welds. Ultrasonic examination Non-destructive examination of welds. Ultrasonic examination of welded joints Metallic industrial piping. Part 1: General Metallic industrial piping. Part 2: Materials Metallic industrial piping. Part 3: Design and calculation Metallic industrial piping. Part 4: Fabrication and installation Metallic industrial piping. Part 5: Inspection and testing Metallic industrial piping. Part 6: Additional requirements for buried piping Metallic industrial piping. Part 7: Guidance on the use of conformity assessment procedures Destructive tests on welds in metallic materials. Hardness testing. Part 1: Hardness test on arc welded joints Voimassa Uusi/korvaava standardi + Lisäys A1:2002 + Lisäys A2:2004

130 SFS-EN 1289 131 SFS-EN 571-1 132 EN 1290 133 EN 1291 134 SFS-EN 1435 135 EN 12517-1 136 SFS-EN 1712 137 SFS-EN 1713 138 SFS-EN 1714 139 SFS-EN 13480-1 140 SFS-EN 13480-2 141 SFS-EN 13480-3 142 SFS-EN 13480-4 143 SFS-EN 13480-5 144 SFS-EN 13480-6 145 CEN/TR 13480-7 146 SFS-EN 1043-1

X X X X X X X X X X X X X X X X X

+ Lisäys A1:2002 + Lisäys A2:2003 + Lisäys A1:2002 + Lisäys A2:2003 + Lisäys A1:2002 + Lisäys A2:2004

+ Lisäys A1:2002 + Lisäys A2:2004 + Lisäys A1:2002 + Lisäys A2:2004 + Lisäys A1:2002 + Lisäys A2:2004 + Lisäys A1:2006

+ Lisäys A1:2006

+ Lisäys A1:2006

STANDARDILUETTELO

Tarkistuspäivämäärä

13(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm 1997-05 1994-02 Destructive tests on welds in metallic materials. Hardness test. Part 2: Micro hardness testing on welded joints Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays Voimassa Uusi/korvaava standardi

147 SFS-EN 1043-2 148 EN 444

X X

STANDARDS FOR THE DESIGN

149 ISO 14122-1 150 ISO 14122-2 151 ISO 14122-3 152 ISO 14122-4 153 ISO 2553 154 EN 22553 155 ISO 4354 156 SFS-ENV 1993-1-1 2001-05 2001-05 2001-05 2004-12 1992-10 1994-05 1997-07 1993-11 Safety of machinery. Permanent means of access to machines and industrial plants. Part 1: Choice of a fixed means of access between two levels Safety of machinery. Permanent means of access to machines and industrial plants. Part 2: Working platforms and Walkways Safety of machinery. Permanent means of access to machines and industrial plants. Part 3: Stairways, stepladders and guardrails Safety of machinery. Permanent means of access to machines and industrial plants. Part 4: Fixed ladders Welded, brazed and soldered joints. Symbolic representation on drawings Welded, brazed and soldered joints. Symbolic representation on drawings (ISO 2553:1992) Wind actions on structures (Relationship between reference velocity pressure... ) Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings X X X X X X X X Korvataan standardeilla SFS-EN 1993-1-1:2005, SFS-EN 1993-18:2005, SFS-EN 1993-1-9:2005 ja SFS-EN 1993-1-10:2005 viimeistään 2010-03-31 Korvataan standardilla SFS-EN 1993-1-1:2005 viimeistään 2010-0331

157 SFS-ENV 1993-11/A1 D

1996-03

Eurocode 3: Design of steel structures. Part 1-1: General. General rules and rules for buildings

X

STANDARDILUETTELO

Tarkistuspäivämäärä

14(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for 1999-11 buildings. Annex G: Design for torsion resistance 1999-11 1999-11 1999-11 2000-01 1996-09 Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings. Annex H: Modelling of building structures for analysis Eurocode 3: Design of steel structures. Part 1-1: General. General rules and rules for buildings Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings. Annex N: Opening in webs Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings. Annex Z: Determination of design resistance from tests Eurocode 3. Design of steel structures. Part 1-2: General rules. Structural fire design Voimassa Uusi/korvaava standardi ---"-----"-----"-----"-----"--Korvataan standardilla SFS-EN 1993-1-2:2005 viimeistään 2010-0331

158 SFS-ENV 1993-11/A2 G 159 SFS-ENV 1993-11/A2 H 160 SFS-ENV 1993-11/A2 J 161 SFS-ENV 1993-11/A2 N 162 SFS-ENV 1993-11/A2 Z 163 SFS-ENV 1993-1-2

X X X X X

X

164

SFS-ENV 1993-1-4

1999-02 1999-02 1999-02 1995-10 2002-10 2003-04 2004-01 2005-09 2004-05 2005-08

Eurocode 3: Design of steel structures. Part 1-4: General rules. Supplementary rules for stainless steels Eurocode 3: Design of steel structures. Part 1-5: General rules. Supplementary rules for planar plated structures without transverse loading Eurocode 3: Design of steel structures. Part 3-1: Towers, masts and chimneys. Towers and masts Eurocode 1: Basis of design and actions on structures. Part 1: Basis of design Eurocode 1: Actions on structures. Part 1-1: General actions. Densities, selfweight, imposed loads for buildings Eurocode 1. Actions on structures. Part 1-2: General actions. Actions on structures exposed to fire Eurocode 1: Actions on structures. Part 1-3: General actions. Snow loads Eurocode 1: Actions on structures. Part 1-4: General actions. Wind actions Eurocode 1: Actions on structures. Part 1-5: General actions. Thermal actions Eurocode 1. Actions on structures Part 1-6: General actions. Actions during execution

X X X X X X X X X X Korvataan standardilla SFS-EN 1990:2002 viimeistään 2010-03-31

165 SFS-ENV 1993-1-5 166 SFS-ENV 1993-3-1 167 SFS-ENV 1991-1 168 SFS-EN 1991-1-1 169 SFS-EN 1991-1-2 170 SFS-EN 1991-1-3 171 SFS-EN 1991-1-4 172 SFS-EN 1991-1-5 173 SFS-EN 1991-1-6

STANDARDILUETTELO

Tarkistuspäivämäärä

15(15)

12.10.2006 Kpl Standardin numero Vahvistus- Otsikko pvm Voimassa Uusi/korvaava standardi

Information

Steel_standards.mdi

15 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

128924


You might also be interested in

BETA
2005 PWD Standard Specification
asacRevFO.xls
Material Selection
britStand.set