Read TSB-1035_Wiring_Diagram_4991-4992.indd text version

Source: Date: Subject: Bulletin No: Models:

Leece-Neville Heavy Duty Systems Division Arcade, NY USA October 5, 2005 Wiring Diagrams TSB-1035 A0014991PA, A0014992PA Alternators 4991PA / 4992PA Wiring Diagram

Technical Service Bulletin

NOTE: Load bearing cables (A) need to be the same length and wire size, and connected to a common point. This is needed to enhance the load sharing of each alternator. NOTE: In order for system to work properly a 4991PA (Master) and 4992PA (Follower) must be used. Substituting a different alternator model will cause the system to not work properly.

This technical Service Bulletin is intended to be used along with TSB-1001 Recommended Wire Size Document.

Important: The information contained in this bulletin is intended for use by trained, professional technicians who have the proper tools, equipment, and training to perform the required maintenance described above. This information is NOT intended for `do-it-yourselfers', and you should not assume that this information applies to your equipment. If you have any questions regarding this information please visit our website at, or contact our technical service department at: Leece-Neville Heavy Duty Systems 400 Main Street Arcade, NY 14009 Phone: (866) 288-9853 Fax: (866) 288-9853 [email protected]



1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate


You might also be interested in

JEFFSOL Alkylene Carbonates Paint Remover Formulations
GM Owner Manuals