Read Hoses.pdf text version

Hoses

9-1

Advanced Technology Hot Melt Hoses

Description

Nordson advanced-technology hot melt hoses are the industry standard for consistent temperature control and safe operation. Advanced- technology hoses extend performance and durability using (NomexR) aramid insulation. This feature, along with thermal-sensing accuracy, automated manufacturing and parallel ground paths, provides unmatched performance, durability and safety. S S S

Aramid insulation significantly improves chemical resistance and moisture sensitivity. Chlorine-free materials eliminate hardware corrosion caused by emissions at elevated temperatures. Insulation retains hose flexibility, and electrical and mechanical properties well beyond system operating temperatures. Insulation will not melt or support combustion in the air. Four layers of overlapped aramid-felt insulation increase thermal efficiency, control heat loss, improve durability and reduce external temperature. Nordson RTD-style and TC Series Pt100 (RTD) hoses feature area sensors that use temperature averaging over a set hose length to generate a reliable reading of hot melt temperature. TC Series thermocouple (TC) hoses use point sensors at a discrete point. Automated manufacturing maintains consistent thermocouple positioning for accurate and consistent temperature readings.

S

S S S S S S

S S

S

S

Precision fabrication and calibration prior to assembly ensure that resistance and control values match, eliminating the need for temperature control calibration at installation. Low watt-density heating elements reduce hot spot potential that can cause char. Closely spaced wraps deliver efficient and uniform heat transfer for controlled startup and consistent flow rates. Two separate ground paths protect personnel from injury and equipment from damage. Dedicated low-resistance ground reduces the possibility of high-impedance faults. Electrical connections use make-first, break-last pins at the applicator and unit ends to prevent powering the hose or applicator without ground connection. Nordson RTD-style waterwash hoses have improved water resistance and greater flexibility for tight installation. Plugs are rated to IP67 with the Nordson hose/applicator rated IPX6. Accessories include brackets, inline filters, fittings, hose protector, and suspension support.

NOTE: Refer to information shipped with the hose for electrical connector data.

Nomex is a registered trademark of E.I. DuPont de Nemours and Company

Part 1101879A

Adhesives and Sealants Guide

9-2

Hoses

Advanced Technology Hot Melt Hoses

(contd)

Specifications

Parameter Maximum operating temperature Maximum hydraulic pressure(1)

5/ 16

Specification 230 _C (450 _F) 10.34 (1,500) 8.27 (1,200) 6.894 (1,000) 240 VAC, 200 VAC, 50/60 Hz UL, CUL, TÜV, CE (RTD versions only)

5/ in. hose, appx. 1/ pound per foot 16 2 5/ in. hose appx. 1 pound per foot 8

in., 1/2 in., MPa (psi) in. MPa (psi)

1-1/8

5/ 8

in. MPa (psi)

Electrical service Approvals and certifications Estimated hose weight with adhesive 1. Varies with hose diameter.

Wattage Calculations for Hoses and Applicators on the PA2500 System

Pump Type Wattage for Hoses and Applicators = Hose Wattage (ft/hose) X 30 W for HP hoses (450 _F max.) OR (ft/hose) X 20 W for standard (375 _F max.) (ft/hose) X 30 W for HP hoses (450 _F max.) OR (ft/hose) X 20 W for standard (375 _F max.) CF-201 150 W FP-200 160 W + Applicator Wattage

Piston

900 Watts (max.)

Applicator Wattage(1)

Gerotor

645 Watts (max.)

Applicator Wattage(1)

1. Applicator Wattages:

AD-31 80 W AD-41 100 W H-201 150 W

Wattage Calculations for Manual Applicators and Hoses for 120V DuraBlue Melters

Max. Max. Wattage Wattage for for a Hose/ any Hose or Applicator Applicator Pair Total Wattage Limitation for all Hoses and Applicators Max. Wattage 1045 W 500 W 600 W 985 W Melter Model D4L and D10L (22 kg/hr) D10L and D16L (45 kg/hr) Length (ft) X 30 W/ft for HP hose (450 F max) OR Length (ft) X 20 W/ft for standard hose (375 _F max) AD-41 - 100 W FP-200 - 160W = Hose Wattage + Applicator Wattage

Part 1101879A

Adhesives and Sealants Guide

Hoses

9-3

Advanced Technology Hot Melt Hoses

Hose Selections

(contd)

Series 3000/3000V; FoamMelt® 130, 190 and 200 Processors; and SureFoam

5 4 2

Hoses are listed by type, diameter, control type and melter. Sensors vary by melter type. Nordson extends advanced-technology construction to the entire product line. RTD-Style Automatic Applicator Hoses 5/16 in. Diameter: Blue Series; 6000 Melter;

3 1

Applicator End Unit End Description Automatic, 240V

5/ 16

Applicator Plug End(3) Watts 56 120 184 248 312 376 504 632 760 51 120 184 248 312 340 456 572 688 120 184 248 312 376 504 632 760 Length M 0.6 1.2 1.8 2.4 3.0 3.6 5.0 6.0 7.4 0.6 1.2 1.8 2.4 3.0 3.6 5.0 6.0 7.4 1.2 1.8 2.4 3.0 3.6 5.0 6.0 7.4 FT 2 4 6 8 10 12 16 20 24 2 4 6 8 10 12 16 20 24 4 6 8 10 12 16 20 24

Continued...

Part Number 274790 274791 274792 274793 274794 274795 274796 223836 274797

in. dia

Automatic, 240V, water

5/ 16

wash(1)

276739 276740 276741 276742 276743 143300 276744 223837 276745

in. dia

Use for all Blue Series, Series 3000/3000V, and 6000 melters. NOTE: The unit end cordset is not compatible with the AquaGuard system.

Automatic, 240V, Hi-Flex(2)

5/ 16

107288 107286 107287 107289 107310 104008 223838 100832

in. dia

Part 1101879A

Adhesives and Sealants Guide

9-4

Hoses

Advanced Technology Hot Melt Hoses

(contd)

RTD-Style Automatic Applicator Hoses 5/16 in. Diameter: Blue Series; 6000 Melter; Series 3000/3000V; FoamMelt® 130, 190 and 200 Processors; and SureFoam (contd)

Description Automatic, 240V, water

5/ 16

Part Number 155183 155184 155185 155186 155187 155188 223839 155189 309396 307016 309397 307006 307007 307008 307009 307010 276150 276151 276152 276153 276154 276155 276156 129556 129557 129559 129561 129562 129564 296908 296909 296910 296911 296912 296913

Watts 109 167 224 282 340 456 572 688 355 445 535 246 373 500 627 754 47 120 184 248 312 376 504 100 153 206 259 313 419 100 153 206 259 313 419

Length M 1.2 1.8 2.4 3.0 3.6 5.0 6.0 7.4 5.0 6.0 7.4 2.4 3.6 5.0 6.0 7.4 0.6 1.2 1.8 2.4 3.0 3.6 5.0 1.2 1.8 2.4 3.0 3.6 5.0 1.2 1.8 2.4 3.0 3.6 5.0 FT 4 6 8 10 12 16 20 24 16 20 24 8 12 16 20 24 2 4 6 8 10 12 16 4 6 8 10 12 16 4 6 8 10 12 16

wash(1) Hi-Flex(2)

in. dia

Use for all Blue Series, Series 3000/3000V, and 6000 melters. NOTE: The unit end cordset is not compatible with the AquaGuard system.

Automatic, 120V, low watt

5/ 16

in. dia

Automatic, 120V, standard watt(4)

5/ 16

in. dia

Automatic, 200V

5/ 16

in. dia

Automatic, 200V, Hi-Flex(2)

5/ 16

in. dia

Automatic, 200V, water wash(1) Hi-Flex(2)

5/ 16

in. dia

1. Use standard Nordson waterwash hoses with RTD-style H-21 handguns. 2. Hi-Flex construction hoses must be used in moving applicator applications. Contact Nordson for details about Hi-Flex hoses.

3. Standard plug shown. Waterwash plugs are round AmphenolR connectors. 4. Consider the wattage available for hoses and applicators on 120V melters. Contact Nordson to ensure that available system wattage is not exceeded.

Part 1101879A

Adhesives and Sealants Guide

Hoses

9-5

Advanced Technology Hot Melt Hoses

(contd)

RTD-Style Automatic Applicator Hoses 5/8 in. Diameter: Blue Series; 6000 Melter; Series 3000/3000V; FoamMelt® 130, 190 and 200 Processors; and SureFoam

Description Automatic, 200 V, Hi-Flex(1)

5/ in. 8

Part Number 129566 129568 129569 129571 129572 129574

Watts 123.75 189.75 255.75 321.75 387.75 519.75 123.75 189.75 255.75 321.75 387.75 519.75 660 831

Length M 1.2 1.8 2.4 3.0 3.6 5.0 1.2 1.8 2.4 3.0 3.6 5.0 6.0 7.4 FT 4 6 8 10 12 16 4 6 8 10 12 16 20 24

dia

Automatic, 230 V,

5/ in. 8

Hi-Flex(1)

129575 129576 129577 129578 129580 129581 1010811 1010813

dia

1. Hi-Flex construction hoses must be used in moving applicator applications. Contact Nordson for more information.

RTD-Style e.dot Hoses

Description Electric, 240V, 1/4 in. dia Part Number 1040295 1056635 1040296 1040297 Watts 189 238 337 485 Length M 2 2.5 3.5 5.0 FT 6 8 12 16

Automatic Applicator Hoses, 5/16, 5/8, 1-1/8 in. Diameter, RTD Control: Series 5000, BM 20/BM 200 Drum Melters

Description

Automatic, 230V, Hi-Flex(1)

5/ 16

Part Number

276946 276947 276948 276949

Watts

225.99 365.49 551.26 689.94 348.73 594.51 858.1 972.87 460.64

Length M

3.0 5.0 7.4 9.1 3.0 5.0 7.4 9.1 3.0

FT

10 16 24 30 10 16 24 30 10

in. dia

Automatic, 230V

5/ 8

276934 276935 276936 276937

in. dia

Automatic, 230V 11/8

100706

in. dia 100707 699 5.0 16 1. Hi-Flex construction hoses must be used in moving applicator applications. Contact Nordson for more information.

Part 1101879A

Adhesives and Sealants Guide

9-6

Hoses

Advanced Technology Hot Melt Hoses

(contd)

RTD-Style AD-31 Handgun Hoses 5/16 in. Diameter: Blue Series; 6000 Melter; Series 3000/3000V; FoamMelt® 130, 190 and 200 Processors; and SureFoam

Description Handgun, AD-31, 240V, corrugated

5/ 16

Part Number cover(1) 274798 115833 130785 274799 101354

Watts 224 282 340 456 688 224 282 340 456 206 419 246 373 500 627 754 174 264 355 445 535 246 373 500

Length M 2.4 3.0 3.6 5.0 7.4 2.4 3.0 3.6 5.0 2.4 5.0 2.4 3.6 5.0 6.0 7.4 2.5 3.6 5.0 6.0 7.4 2.5 3.6 5.0 FT 8 10 12 16 24 8 10 12 16 8 16 8 12 16 20 24 8 12 16 20 24 8 12 16

in. dia

Handgun, AD-31, 240V, DuraBraid

5/ 16

cover(2)(3)

133913 138927 1044277 1044278

in. dia

Handgun, AD-31, 200V, corrugated cover(1)

5/ 16 5/ 16

276533 276534 307011 307012 307013 307014 307015

in. dia in. dia

Handgun, AD-31, 120V, corrugated cover(1)(3)

Handgun, AD-31, 120V, corrugated cover(1)

5/ 16

309398 309399 309400 307017 309401

in. dia

Low watt design(4))

Handgun, AD-31, 120V, DuraBraid cover(2)

5/ 16

1039676 1039677 1039678

in. dia

1. Semi-rigid molded cover provides additional abrasion protection. 2. DuraBraid covering for better wear resistance. Use only with corrugated-style handguns.

3. AD-31 RTD-style handguns use a pivot sleeve shell that locks to the hose corrugated cover. This is designed for use with braided cover hoses and is not compatible with corrugated cover hoses. Conversion kits to permit use of corrugated cover hoses with thermostat handguns are available. Consult a Nordson representative for conversion kits. 4. For multiple hose systems.

Part 1101879A

Adhesives and Sealants Guide

Hoses

9-7

Advanced Technology Hot Melt Hoses

(contd)

AD-31 (LBS, B, C, K) Handgun Hoses 5/16, 5/8, 3/4, 1-1/8 in. Diameter, RTD Control: Series 5000, BM 20/BM 200 Drum Melters

Description Handgun, 240V

5/ 16

Part Number 276950 276951 276952 276953

Watts 282.39 456.17 687.87 697.50 348.73 594.51 858.1 972.87 259 419 361 583 879

Length M 3.0 5.0 7.4 9.1 3.0 5.0 7.4 9.1 3.0 5.0 3.0 5.0 7.4 FT 10 16 24 30 10 16 24 30 10 16 10 16 24

in. dia

Handgun, 230V

5/ 8

276938 276939 276940 276941

in. dia

Handgun, 230V, corrugated

5/ 16 3/ 4

cover(1)

120958 120959 346048 346049 346050

in. dia pressure(2)(3)

Handgun, 230V, high in. dia

1. Semi-rigid molded cover provides additional abrasion protection. 2. Round, MS connector (8 pin) on applicator end.

3. BM units with 42:1 pumps must use high pressure hoses only.

RTD-Style AD-41 Handgun Hoses 5/16 in. Diameter: Blue Series, Series 3000/3000V, 6000 Melters

Description Handgun, AD-41, 240V, DuraBraid(1)

5/ 16

Part Number 325763 325764 325765 325766 325767 1031728 1031729 1031740 307001 307002 307003 307004 307005 325779 325780 325781 325782 325783

Watts 224 340 456 572 688 206 313 419 246 373 500 572 754 174 264 355 445 535

Length M 2.4 3.6 5.0 6.0 7.4 2.5 3.6 5.0 2.4 3.6 5.0 6.0 7.4 2.5 3.6 5.0 6.0 7.4 FT 8 12 16 20 24 8 12 16 8 12 16 20 24 8 12 16 20 24

in. dia

Handgun, AD-41, 200V, DuraBraid(1)

5/ 16

in. dia

Handgun, AD-41, 120V, DuraBraid(1)(2)

5/ 16

in. dia

Handgun, AD-41, 120V, DuraBraid(1)(2)

5/ 16

in. dia

Low watt design, 190 _C (375 _F) maximum

1. DuraBraid covering for better wear resistance. Use only with corrugated-style handgun.

2. For multiple hose systems.

Part 1101879A

Adhesives and Sealants Guide

9-8

Hoses

Advanced Technology Hot Melt Hoses

(contd)

Transfer Hoses 5/16, 5/8, 1-1/8 in. Diameter RTD Control: Series 5000, BM 20/BM 200 Drum Melters

Description Transfer, BM, RTD, 230V

5/ 16

Part Number 160263 160264 160265 276942 276943 276944 276945 100704 100705 304559

Watts 365 551 690 348.73 594.51 858.1 972.87 460.64 699 1080

Length M 5.0 7.4 9.1 3.5 5.0 7.4 9.1 3.0 5.0 7.4 FT 16 24 30 10 16 24 30 10 16 24

in. dia

Transfer, BM, RTD, 230V

5/ 8

in. dia

Transfer, BM, RTD, 230V 11/8 in. dia

Automatic Applicator Hoses 5/8 in. Diameter Thermistor Control: 150 Series FoamMelt Processors

Description Automatic, 240V

5/ 8

Part Number 719033 719022 719030

Watts 214.3 348.6 526.4

Length M 1.8 3.0 5.0 FT 6 10 16

in. dia

Automatic Applicator Hoses 5/8 in. Diameter RTD Control: 190 Series FoamMelt Processors

Description Automatic, 230V

5/ 8

Part Number 111094 111095 111096

Watts 189.8 312.8 519.8

Length M 1.8 3.0 5.0 FT 6 10 16

in. dia

Part 1101879A

Adhesives and Sealants Guide

Hoses

9-9

Advanced Technology Hot Melt Hoses

(contd)

VersaBlue Series High Temperature Hoses, Pt100 Control

Unit End

Applicator End

Unit Cuff

3 2 1 7 4 5 6

Applicator Cuff

End Cuff

1 2 3 4 5

A B C

Applicator Plug End

Unit Plug End Part Number 1040712 1040713 1040714 Watts 123 186 250 313 411 516 621 827 238 319 400 525 659 793 Length M 1.2 1.8 2.4 3.0 4.0 5.0 6.0 8.0 1.8 2.4 3.0 4.0 5.0 6.0 FT 4 6 8 10 13 16 20 26 6 8 10 13 16 20

Description

Automatic, 240 V, Pt100, HT, high pressure

5/ 16

1040715 1040716 1040717 1040718 1040719 1040720 1040721

in. (8 mm) dia.

Automatic, 240 V, Pt100, HT, high pressure

5/ in. 8

1040722 1040723 1040724 1040725

dia.

Part 1101879A

Adhesives and Sealants Guide

9-10

Hoses

Advanced Technology Hot Melt Hoses

(contd)

TC-8 Series Automatic Applicator Hoses Thermocouple Control: MX Series Melters

Description Automatic, 230 V, thermocouple, 8 mm (.312 in.) ID TC-12-8 thermocouple TC-18-8 thermocouple TC-24-8 thermocouple TC-30-8 thermocouple TC-40-8 thermocouple TC-50-8 thermocouple TC-60-8 thermocouple TC-70-8 thermocouple TC-74-8 thermocouple TC-80-8 thermocouple TC-90-8 thermocouple TC-100-8 thermocouple TC-110-8 thermocouple TC-120-8 thermocouple TC-130-8 thermocouple 222771 149102 149103 149104 149105 149106 149107 222772 222773 222774 222775 222776 222820 222821 222822 117 179 240 304 408 513 616 720 762 824 928 1032 1137 1240 1344 1.2 1.8 2.4 3.0 4.0 5.0 6.0 7.0 7.4 8.0 9.0 10.0 11.0 12.0 13.0 4 6 8 10 13 16 20 23 24 26 29 33 36 39 43 Part Number Watts Length M FT

TC-8 Series Automatic Applicator Hose Pt100 Control: MX Series Melters

Description Automatic, 230 V, Pt100, 8 mm (.312 in.) ID TC-12-8 Pt100 TC-18-8 Pt100 TC-24-8 Pt100 TC-30-8 Pt100 TC-40-8 Pt100 TC-50-8 Pt100 TC-60-8 Pt100 TC-70-8 Pt100 TC-74-8 Pt100 TC-80-8 Pt100 TC-90-8 Pt100 TC-100-8 Pt100 TC-110-8 Pt100 TC-120-8 Pt100 TC-130-8 Pt100 222797 222813 222777 222778 222779 222780 222781 222782 222783 222784 222799 222800 222823 222824 222825 117 179 240 304 408 513 616 720 762 824 928 1032 1137 1240 1344 1.2 1.8 2.4 3.0 4.0 5.0 6.0 7.0 7.4 8.0 9.0 10.0 11.0 12.0 13.0 4 6 8 10 13 16 20 23 24 26 29 33 36 39 43 Part Number Watts Length M FT

Part 1101879A

Adhesives and Sealants Guide

Hoses 9-11

Advanced Technology Hot Melt Hoses

(contd)

TC-13 Series Automatic Hoses Thermocouple Control: MX Series Melters

Description Automatic, 230 V, thermocouple, 13 mm (.500 in.) ID TC-12-13 thermocouple TC-18-13 thermocouple TC-24-13 thermocouple TC-30-13 thermocouple TC-40-13 thermocouple TC-50-13 thermocouple TC-60-13 thermocouple TC-70-13 thermocouple TC-74-13 thermocouple TC-80-13 thermocouple TC-90-13 thermocouple TC-100-13 thermocouple TC-110-13 thermocouple TC-120-13 thermocouple TC-130-13 thermocouple 222801 222802 222803 222804 222805 222806 222807 222808 222809 222810 222811 222812 222814 222815 222816 117 179 240 304 408 513 616 720 762 824 928 1032 1137 1240 1343 1.2 1.8 2.4 3.0 4.0 5.0 6.0 7.0 7.4 8.0 9.0 10.0 11.0 12.0 13.0 4 6 8 10 13 16 20 23 24 26 29 33 36 39 43 Part Number Watts Length M FT

TC-13 Series Automatic Hoses, Pt100 Control: MX Series Melters

Description Automatic, 230 V, Pt100, 13 mm (.500 in.) ID TC-12-13 Pt100 TC-18-13 Pt100 TC-24-13 Pt100 TC-30-13 Pt100 TC-40-13 Pt100 TC-50-13 Pt100 TC-60-13 Pt100 TC-70-13 Pt100 TC-74-13 Pt100 TC-80-13 Pt100 TC-90-13 Pt100 TC-100-13 Pt100 TC-110-13 Pt100 TC-120-13 Pt100 TC-130-13 Pt100 222785 222786 222787 222788 222789 222790 222791 222792 222793 222794 222795 222796 222817 222818 222819 117 179 240 304 408 513 616 720 762 824 928 1032 1137 1240 1343 1.2 1.8 2.4 3.0 4.0 5.0 6.0 7.0 7.4 8.0 9.0 10.0 11.0 12.0 13.0 4 6 8 10 13 16 20 23 24 26 29 33 36 39 43 Part Number Watts Length M FT

Part 1101879A

Adhesives and Sealants Guide

9-12

Hoses

Advanced Technology Hot Melt Hoses

Select Series Hoses

(contd)

The Select Series Hoses provide Nordson quality hoses to fit melters from ITW/Dynatect, Hot Melt Technologies (HMTr) or Robatech. These hoses are equipped with the proper electrical/hydraulic connectors for easy installation on other manufacturers' melters.

ITW - 5/16 in. Automatic Hose for Dynapro and Dynaplus

Part Number 297901 297900 297899 297898 Voltage 240 240 240 240 Watts 109 167 224 282 Hose, 4 ft., DYP Hose, 6 ft., DYP Hose, 8 ft., DYP Hose, 10 ft., DYP Description

ITW - 5/16 in. Automatic Hose for Dynamelt and Dynamini with Dynacontrol

Part Number 297881 297882 297883 297884 1073291 1074081 Voltage 240 240 240 240 240 240 Watts 109 167 224 282 456 688 Hose, 4 ft., DYC Hose, 6 ft., DYC Hose, 8 ft., DYC Hose, 10 ft., DYC Hose, 16 ft., DYC Hose, 24 ft., DYC Description

Robatech - 5/16 in. Automatic Hose for Robatech Concept 4

Part Number 297904 297905 297906 297907 1021829 1022010 1087514 Voltage 240 240 240 240 240 240 240 Watts 99.75 152.95 206.15 259.35 312.55 418.95 525.35 Hose, 4 ft., RB Hose, 6 ft., RB Hose, 8 ft., RB Hose, 10 ft., RB Hose, 12 ft., RB Hose, 16 ft., RB Hose, 20 ft., RB Description

HMT - Handgun Hoses for HMT ProFlex

Part Number 1001369 330980 725816 330982 1013992 Voltage 115 115 115 115 115 Watts 300 200 300 393 494 Hose, AD-31, HMT, 12 ft. Hose, AD-41, HMT, 8 ft. Hose, AD-41, HMT, 12 ft. Hose, AD-41, HMT, 16 ft. Hose, AD-41, HMT, 20 ft. Description

Part 1101879A

Adhesives and Sealants Guide

Hoses 9-13

Advanced Technology Hot Melt Hoses

(contd)

Accessories

The use of proper support brackets and correct installation techniques can significantly extend the life of Nordson hot melt hoses. Accessories are for 5/16 in. advanced-technology hoses unless otherwise noted.

Service Kit for routing and fastening hoses P/N 111940

Hose Protector P/N 273314

Spiral Wire Support for hose suspension P/N 271486

Mounting Accessories

Part Number 111940 271486 1034380 273314 132998 Service kit Spiral wire support Leaf spring support (all widths) Hose protector Corrugated hose cover, 5.2 m (17 ft) Spiral-wrap chafe guard prevents point contact wear. Description Comment Molded corrugated tube and clips used to route and fasten hoses. For 5/8 and 1-1/8 in. hoses, order P/N 274174.

Insulating Cuffs

Part Number 273634 273635 1024083 1024084 274429 307000 Description Insulated cuff, 64 mm (2.5 in.) long Insulated cuff, 51 mm (2 in.) long Insulated cuff, 90_ fitting Insulated cuff 45_ fitting Insulated cuff, 44 mm (1.75 in.) long Insulator, fitting Comment Use to insulate joint connections between hose and applicator.

Part 1101879A

Adhesives and Sealants Guide

9-14

Hoses

Advanced Technology Hot Melt Hoses

(contd)

Hose Straps

Part Number 142512 142513 Description Strap, hose hanger, 51 mm x 356 mm (2 in. x 18 in.) Strap, hose hanger, 51 mm x 457 mm (2 in. x 14 in.)

Extension Cords

Part Number 328967 115576 115581 Description Cable assembly, Vista, Shld, 7.3 m (24 ft) Cord, hose, 0.6 m (2 ft), 6000, FM, 130/170 Cord, hose, 9.1 m (30 ft), 6000, FM, 130/170 Comment Hose extension cordset compatible with 3000V. Hose extension cordsets compatible with TC200.

Hose Fittings

Part Number Pipe Thread Fitting O-ring Fitting 972628 972051 972657 Straight Description Comments Applicator to automatic hose; melter to automatic or handgun hose Compact hose-to-applicator fitting to minimize cold joint at applicator Extra ports on applicator or melter Applicator to automatic hose Melter to automatic or handgun hose Applicator to automatic hose Melter to automatic or handgun hose FM 150 to hose Straight FM 150 to 5/8 in. hose Applicator to 5/8 in. hose Applicator to 5/8 in. hose 45_ elbow O-ring

5/ hose to manifold with 8 7/ -14 threaded port 8

973411

973574 274180

Pipe plug

972200 972646 274179 972618 972647 -- -- -- -- -- -- 310281 719023 719024 719047 816162 945025

90_ elbow

45_ elbow

For 7/8-14 threaded port

Part 1101879A

Adhesives and Sealants Guide

Hoses 9-15

Advanced Technology Hot Melt Hoses

(contd)

Handgun Bracket Kits

3000

2300

Bracket Kit for 2300 Melters P/N 276318

Bracket Kit for 3000 Melters P/N 133644

Part Number 133644 276318

Description Bracket kit, handgun Bracket kit, handgun

Comments Series 3000, tank end Series 2300, tank end

Melter-End Hose Fittings

For more information on fittings, see Section 13.

O-Ring Fitting Straight 972628 90_ 972646 45_ 972647 Straight 972051

Pipe-Thread Fitting (NPT) 90_ 972200 45_ 972618

KB and LS Melter Hose Fittings

Part Number 973137 1029243 1032999 1028578 Description LS 10/20 and KB 10/20 from flow control valve to hose, KB 30/50/100 hose manifold to hose LS 10/20 with filter block to hose, KB 10/20 with filter block or v3 or v4 with T block From #6 hose to automatic applicator 90_ elbow From #6 hose to automatic applicator 45_ elbow

Part 1101879A

Adhesives and Sealants Guide

9-16

Hoses

Advanced Technology Hot Melt Hoses

(contd)

Applicator-End Hose Fittings

For more information on fittings, see Section 13.

O-Ring Fitting Straight 972657 90_ 274180 45_ 274179 Straight 972051

Pipe-Thread Fitting (NPT) 90_ 972200 45_ 972618

NOTE: Hose applicator fittings vary in dimensions and thread specifications. Consult Nordson for compatible TC Series fittings and connectors.

Non-Heated Inline Filters

For more information on inline filters, see Section 13.

Mesh size 50 mesh 100 mesh 200 mesh

Straight 271658 271659 271595

905 273415 273414 273413

455 804123 274988 804125

Multi-Plane Swivels

Part Number 139091 139093 139096

Contact PPA Application Engineering for robotic installation assistance.

Description Swivel, applicator, SP, SAE-6, elbow Swivel, hose, SP,SAE-6/JIC-6, 5/16 in. straight Swivel, hose, SP, SAE-6/JIC-12, 5/8 in., straight.

Part 1101879A

Adhesives and Sealants Guide

Information

hoses

16 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1188564


You might also be interested in

BETA
hoses