Read NAIROBI TECHNICAL TRAINING INSTITUTE text version

MINISTRY OF HIGHER EDUCATION SCIENCE AND TECHNOLOGY

Application procedures and admission conditions NAIROBI TECHNICAL TRAINING INSTITUTE NAIROBI P.O. Box 30039 ­ 00100 TEL: 6764863/09 NAIROBI PROSPECTUS Website: www.ntti.ac.ke BUSINESS STUDIES DEPARTMENT COURSE Diploma in Business Administration Diploma in Supplies Management Diploma in Personnel management Certificate in Business Administration Certificate in Supplies Management Certificate in Secretarial Studies (single & group) Diploma in Accounting & Finance Diploma in Sales & Marketing Diploma in sales and marketing(module based) Diploma in Human resource management(module based) INFORMATION COMMUNICATION TECHNOLOGY

COURSE

Email: [email protected] ENTRY REQUIREMENT Mean grade CMean grade CMean grade CMean grade D+ Mean grade D+ Mean grade D+ Mean grade D+ Mean grade D+ Mean grade C Mean grade C ENTRY REQUIREMENT Open Open Mean grade D Mean grade CENTRY REQUIREMENT KCSE Mean Grade C- (C MINUS) At least C- in Science ubjects(Maths,Biology,physics,chem istry) DURATION

1. Handwritten application letter starting course(s) applied for should be addressed to: THE PRINCIPAL. NAIROBI TECHNICAL TRAINING INSTITUTE P.O. Box 30039-00100, NAIROBI FAX: 67603578 TEL: 6764863/09. 2. Attach Photocopies of KCSE Certificate, National ID Card, School Leaving Certificate 3. Money Order of Kshs.300.00 non-refundable application processing fee in the name of Nairobi Technical Training Institute (or cash if hand delivered) must accompany your application. 4. Application letters should be posted or hand delivered, the deadline is two weeks before the intake time indicated. ADMISSION TIME January January January September September September Jan,June Jan,June Jan,may Jan,may ADMISSION TIME EVERY MONDAY EVERY MONDAY EVERY MONDAY Jan, & May ADMISSION TIME January May FEES (SHS) 6,600/9,000 per term 6,600/9,000 per term 6,600 per term 6,600 per term 6,600 per term 6,600 per term 19,000 per session 19,000 per session 19,000 per module 19,000 per module FEES(shs) 3,500 3,000 for each package 4,000 ­ for 5 packages 14,000 per term FEES (SHS) 7,100 per term 10,700 per session (4 months) MODE OF STUDY Full-time/Part-time Full-time/Part-time Full-time Full-time Full-time Full-time Part-time 12 ­ 2 & 4 ­ 6 Part-time 12 ­ 2 & 4 ­ 6 Part-time 12 ­ 2 & 4 ­ 6 Part-time 12 ­ 2 & 4 ­ 6 MODE OF STUDY Part-time 12 ­ 2 & 4 ­ 6 Part-time 12 ­ 2 & 4 ­ 6 Part-time 12 ­ 2 & 4 ­ 6 Full-time & part time MODE OF STUDY Full-time Part-time EXAMINING BODY KNEC KNEC KNEC KNEC KNEC KNEC ICM(London) ICM(London) KNEC KNEC EXAMINING BODY NTTI NTTI NTTI KNEC EXAMINING BODY KNEC

2 years-6 terms 2 years-6 terms 2 years-6 terms 2 years (6 terms) 2 years (6 terms) 2 years 3 sessions of 6 months each 3 sessions of 6 months each 3 modules of 6 months each 3 modules of 6 months each DURATION One month One month 2 months 6 months per module DURATION 3 years

AUTOCAD

PAGEMAKER, PHOTOSHOP, CORELDRAW, SPSS, SAGE ETC

Certificate in Computer Applications (i.e.5 packages) Diploma in Information Technology HEALTH AND APPLIED SCIENCES DEPARTMENT COURSE Diploma in: Applied biology Analytical Chemistry Food Science & Tech Chemical Engineering Diploma in Pharmacy

KCSE MG C With C in Eng, Bio, Chem, Phy/Maths Diploma in Medical Laboratory Technology KCSE MG C With C in Eng/Kiswahili, Bio, Chem, Phy/Maths Certificate in: KCSE MG D+ plus Science Lab. Technology Good grades in Sciences ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT Diploma in: KCSE MeanGrade ­ CElectrical Engineering (power) C- in Maths, Physics & English Electronics Engineering Craft Certificate holders Craft Certificate in: Electrical Installation/or Electronics KCSE Mean Grade ­ D+ with D+ in Maths or Physics and English.

3 years 3 years 2 years 2 years 3 years

January January May September January

16,000 per term 16,000 per term 7,100 per term 8,700 per term 7,100 per term 14,500 per term 7,100 per term 12,500 per term

Full-time Full-time Full-time part-time Full-time Part-time(eve) Full-time Part-time

KNEC KNEC KNEC KNEC KNEC KNEC

2 years

September January(evening)

Technician Diploma in: Electrical Engineering (electronics or power options) Technician certificate in Electrical and Electronics Eng Electrical Installation Artisan Certificate in Information Technology(system Support-mtnc) Diploma in Information Technology(system Support-mtnc) INSTITUTIONAL MANAGEMENT DEPARTMENT COURSE Diploma in Clothing Technology Diploma in Clothing Technology (upgrading) Craft Certificate in Garment Making Diploma in food and beverage management(modular) Diploma in food and beverage management Diploma in food and beverage management Craft Certificate in Food & Beverage Production & Service Certificate in Food & Beverage Prod. & Service Cake Baking & Decoration Artisan in Clothing Technology Certificate in Fashion and Design AUTOMOTIVE ENGINEERING DEPARTMENT COURSE Diploma in Automotive Eng. Craft certificate in motor Vehicle Mechanics Artisan ­ Motor Vehicle Mechanics Technician Diploma in Motor Vehicle Systems Diploma in Motor Vehicle Systems Technician Cert in Motor Vehicle Systems Panel Beating & Spray Painting Artisan ­ Motor Vehicle Mechanics MECHANICAL DEPARTMENT COURSE Diploma in Mechanical Engineering Production option Diploma in Mechanical Engineering Plant option Craft Certificate Mechanical Engineering Production Option Engineering Skills (Diploma) Engineering Skills Certificate Certificate in Welding and Fabrication Fitter General Grade III Turner Machinist Grade III Welder Grade III (Artisan)

Technician Certificate level in electrical and electronics. Form four leavers Form four leavers Form four leavers Certificate in Information Technology(system Support-mtnc ) ENTRY REQUIREMENT Mean grade CCraft Certificate Mean grade D KCSE MEAN GRADE C Mean grade C- (good grades in sciences) Certificate in food and beverage(City&Guilds) Mean grade D+ KCSE Mean grade D Open KCSE KCSE ENTRY REQUIREMENT Mean Grade C- Maths C- Phy. C- Eng. C- or CRAFT Certificate in Motor Vehicle Mech. Mean Grade D+ with D+ in maths Phy/Physical Sci. English D+ or ARTISAN KCSE Technician Certificate in Motor Vehicle Systems Certificate in motor vehicle systems or KNEC craft certificate KCSE mean grade D+ KCSE certificate KCSE certificate ENTRY REQUIREMENT

4 Terms 6 months 1 year 6 months 6 months ADMISSION TIME September May May May September September/May May May & Sept April, Aug, Dec Jan Jan ADMISSION TIME January September September Jan & July Jan & July Jan & July Jan & September January ADMISSION TIME January January September Jjanuary January May January and may

May January and May September May May DURATION 7 terms 4 terms 7 terms 1 YEAR 3 years 1 year 7 terms 1 YEAR 1 month 1 year 1 year DURATION 3 years 2 years 4 TERMS 1 year 12 months 6 months 1 year 1 Year

13,500 per term 19,000 for the course 9,700 per term 19,000 for the course 19,000 for the course FEES (SHS) 8,100 per term 8,100 per term 8,100 per term 15,500 per term 9,100 per term 18,000 per term 9,100 per term 15,000 per term 8,500 per month 8,100 per term 12,500 per term FEES (SHS) 7,100 per term 7,100 per term 7,100 per term 19,000 for 6 months Exam fee-15,500 37,000 for the course Exam fee-31,000 19,000 for the session 10,000 per term 10,500 per term DURATION 3 years 3 years 7 terms 3 terms 2 terms 2 terms 1 year

Part ­ time Part ­ time Part ­ time Part ­ time Part ­ time MODE OF STUDY Full-time Full-time Full-time Part-time Full-time Part-time Full-time Part-time Part-time Full time Part time MODE OF STUDY Full-time Full-time Full-time Evening & Weekends Evening & Weekends Evening & Weekend Part-time Full time

CITY & GUILDS CITY & GUILDS KNEC CITY & GUILDS CITY & GUILDS EXAMINING BODY KNEC KNEC KNEC KNEC KNEC CITY & GUILDS KNEC CITY & GUILDS N.T.T.I KNEC CITY & GUILDS EXAMINING BODY KNEC KNEC KNEC CITY & GUILDS CITY & GUILDS CITY & GUILDS DIT KNEC EXAMINING BODY KNEC KNEC KNEC CITY & GUILDS CITY & GUILDS DIT

FEES (SHS) 7,100 per term 7,100 per term 7,100 per term 9,500 per term 8,000 per term 8,000 per term 8,000 per term

MODE OF STUDY Full-time Full-time Full-time` Part-time Part-time Part time Part-time

KCSE Mean Grade C-, C- in maths, Eng & Physical Sciences or Craft production option KSCE Mean Grade C- ,C- in maths, Eng, Phy/Physical Sciences KCSE Mean Grade D+ in maths, Eng, Physical Sciences or Engineering Skills Certificate KCSE Mean Grade D+, D+ in maths, Eng, KCSE Mean Grade D, D in Maths, Eng . KCSE KCPE And Above " "

Diploma in Refrigeration & Air Conditioning

KCSE Mean Grade D+, lish or Pass in Ref & Air Cond. Cert

January

3 terms

10,000 per term

Part-time

CITY & GUILDS

NOTE: On admission, all full-time students pay other levies amounting to Ksh. 5,723, while part-time students pay Ksh. 600. Full -time classes are conducted between 8.00 a.m. to 4.00 p.m daily on weekdays Part -time classes are conducted between 12.00 to 2.00 p.m and 4.00 p.m to 6.00 p.m and Saturdays (where applicable)

The college started as a Secondary School in 1951 offering tuition to the predominantly Asian Community of Ngara. At Independence the Secondary school was converted to technical High School to offer basic Engineering skills. The main courses then were Mechanical Engineering, carpentry and Joinery; and it also had two `A' level classes offering mainly Science oriented courses. Following the implementation of the 8.4.4 system of education, all technical secondary schools were in 1986 converted to technical training Institutions. The Institute began to offer Craft and Diploma courses in Mechanical Engineering, Electrical Installation, Motor Vehicle Mechanics, Science Laboratory Technology, Supplies Management and Accounting and Finance among others. The Institute has since Grown from strength to strength and offers a wide variety of courses at Certificate, Craft and Diploma levels as detailed herein:1. BUSINESS EDUCATION DEPARTMENT The department is dynamic and fast growing offering the following courses; a) Business Administration ­ Offered at both Diploma and Certificate levels on fulltime and part-time basis. Successful trainees work as clerical officers, Administrators and managers in all sectors of the economy (for details refer to appendices). b) Supplies Management ­ The course is examined at Certificate, Craft and Diploma both on full time and part time basis. Graduates are employed in supplies and procurement as stores managers, stock controllers, purchasing managers etc. c) Secretarial ­ Offered at Diploma and Certificate levels; with intensive coverage of relevant computer packages. Trainees enter the job market as personal assistants, administrative secretaries, office managers etc. d) Accounting and Finance ­ A variety of courses are offered in this field which include KATC, KAME and CPA Examined by KASNEB and ICM ­ London. The graduates work as accounts clerk, accountants, auditors, financial managers etc. e) Computing and information processing ­ Information technology is an integral part of all business courses however those who aspirations are to work as database managers, data entry clerks, computer technicians etc can undertake Certificate of Diploma course examined by ICM (London). On completion the trainees are employed in the legal profession as court clerks, court administrators and assistants to advocates. f) Legal Studies ­ The course is offered on part time basis only and examined by ICM (London). On completion the trainee are employed in the legal profession as court clerk, court administrators and assistants to advocates. g) Human Resource Management ­ Offered on full time basis. It equips trainees with skills to work as personnel managers, personnel clerks, human relations officers and trade unionists. h) Sales and Marketing ­ Offered on part time basis and examined by ICM. The course prepares trainees to work as sales managers, salesmen and marketing specialists. 2. APPLIED SCIENCE The department concentrates in the provision of technical skills in areas related to Applied Science and Medical courses which include: Medical Laboratory Course ­ Offered at both Diploma and Certificate levels, aims at training Medical a) Laboratory technologists who can serve both in public and private hospitals, tertiary institutions, universities etc. b) Pharmacy Course ­ The need for qualified pharmacists is high and the Institute therefore offers the course at both diploma and Certificate levels. The successful trainees deployed to serve as Pharmacy assistants etc. c) Chemical Engineering ­ This course is only offered at Diploma level with the aim of training chemical engineers who can work in chemical firms as quality controllers, production managers, sales and Research and Development officers.

d) e) f)

g)

h)

Analytical Chemistry ­ It's a three year Diploma course which prepares technologists in the field of analytical and applied chemistry who can be deployed as laboratory managers or industrial chemistry technologists. Applied Biology ­ A competitive course which trains graduates to be absorbed in areas of research (e.g. KARI, ILRI, etc), museums and also as laboratory technologists in learning institutions and industrial organizations. It is offered at Diploma level for duration of 3 years. Food Science Technology ­ This 3 year diploma course deals mainly in the principles of food quality controls, food processing equipment and machinery and the technology of specific products. On successful completion of the course, job opportunities exist in the dairy, beverage, sugar, food confectionaries industries (as supervisors and quality controllers etc). Science Laboratory Technology- It is a craft Certificate course which takes two years. Trainees who complete the course have the opportunity to advance for Diploma course in applied biology, analytical chemistry, chemical engineering, etc. Alternatively, the trainee can work in the following areas; research Institutions, chemical and pharmaceutical companies and general laboratories as technicians. Bio-Medical Technology ­ This is internally examined and aims at preparing trainees whose future aspirations are to work as medical technologists, paramedical and veterinary research assistants and in other laboratories related to medical field both for human beings and animals.

3. ELECTRICAL AND ELECTRONICS DEPARTMENT The department has two sections, i.e. Electrical and Electronics, both offering courses at various levels i.e. Diploma, Certificate and specialized courses. The successful trainees at various levels can be employed in the fast growing electrical and electronics sectors of the economy as engineers, technicians, supervisors, production managers etc. Opportunities also exist in self ­ employment for repairs, installation and sales men of various electrical and electronics components. 4. INSTITUTIONAL MANAGEMENT DEPARTMENT The department has two main sections i.e. i. Clothing Section ­ Offers courses at both Diploma and Craft certificate levels, which are aimed at the provision of skills to technicians and craftsmen in the clothing industry as well as fashion design sand garment pattern producers. At the lower level i.e. craft certificate, trainees acquire skills to work as dressmakers and tailors in making quality and marketable garments as well as supervisory roles at operational level. Both cadres of trainees have got opportunities in self-employment. ii. Catering Section ­ Training is geared towards those who may wish to work in the hospitality industry as supervisors in the kitchens, restaurants, front office etc. It also offers trainees with skills on food production (craft), waiters, cateress and other related areas including self ­ employment. 5. AUTOMOTIVE ENGINEERING DEPARTMENT The motor vehicle Industry both formal and informal is one of the fastest growing sectors in the Kenyan economy as can be witnessed by the ever increasing volume of traffic on Kenyan roads. Service repair and maintenance is an integral part of day to day motoring and the department endeavors to equip the trainees with the relevant skills to cope especially given that technology is becoming more and more sophisticated. Courses are offered at Certificate, Craft and Diploma levels. 6. MECHANICAL ENGINEERING DEPARTMENT The Department has three workshops each equipped with various production machines, tool store and welding bays with arch ­ welding machines and oxy-acetylene sets. The department offers courses at Certificate, craft and Diploma levels. Diploma in Mechanical Production option graduates are employed in tool rooms, workshops, and in the production floors of manufacturing companies while plant option graduates are employed as maintenance technicians, foremen as supervisors.

(All diploma graduates are eligible to join higher institutions of learning in various fields of specialization).

Information

NAIROBI TECHNICAL TRAINING INSTITUTE

4 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

381753