Read Microsoft PowerPoint - ICD2 Cable.ppt text version

ICD2-to-P3 Cable

(Needed only by software developers needing to program the full application and bootloader software to the dsPIC controller on the modem board.)

An interface cable connecting the ICD2 programming pod to the P3 connector on the modem PCB.

2x3 0.1" receptacle To P3

Y R To ICD2 Pod

1 3 5

2 4 6


B 6-pin RJ connector


Wiring Notes:

There are two ways to connect the ICD2 pod cable to the P3 connector ... 1) Using a 6-pin RJ transition connector ... wire the pins to the 3x3 connector as shown with the red wires; 2) Cut the plug from the 6-wire flat cable coming from the ICD2 pod and connect the wires (colored W, K, R, G, Y and B) directly to the 2x3 connector, as shown above. (Note: The color ordering may be reversed if your flat cable reversed. If so, just wire positionally: bottom wire to 2x3 pin 1, etc.) June 16, 2008 G. Heron, N2APB

... or ...


Microsoft PowerPoint - ICD2 Cable.ppt

1 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate


You might also be interested in

Cisco Model DPC3208 DOCSIS 3.0 8x4 Cable Modem with Embedded Digital Voice Adapter
User's Guide - WebSTAR Model DPC2100 and EPC2100 Cable Modem