Read C-I-138-3GZ text version


Dutch Harbor Gazebo Canopy Replacement

Product code: 780-01237922-8 UPC code: 769455755346 Vendor Item: C-I-138-3GZ

Date of purchase: _____/ _____/ _____



Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by six people is recommended.

A (1) Orignal Canopy Frame (not included in this package)

B (1) New Canopy Fabric


Use the follwing parts from your orignal gazebo Use the follwing parts from the hardware

Ca (6) Bolt

Cd (1) Assembly Instructions Sheet

Cb (12) Metal Washer

Ce (1) Allen Wrench

Cc (6) Nut

Cf (1) Open Hex Wrench


Special Warning

Assemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use care when handing. Assembly by four adults is recommended. The gazebo is not intended to be a permanent structure. Take it down during high winds or it may be damaged. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric may render the flame-resistant properties ineffective.


Fig. 1

Process of removing gazebo canopy

Cb Ca


Cb Cc


Pull the bars of gazebo frame (A) from old canopy fabric pockets. Then remove all bolts (Ca), nuts (Cc), metal washers (Cb) which attached on legs and orignal canopy frame (A). See Fig. 1.

A Fig. 2 B


Pull out the short top bars of the canopy frame (A) from the wind vent canopy. Then remove old canopy fabric from the canopy frame (A). See Fig. 2 and Fig. 3. Fig. 3 A


Process of replacing new gazebo canopy


Attach new canopy fabric (B) to the assembled canopy frame (A). Insert top short bar into each top pocket of the canopy frame. Pull down new canopy fabric and spread the canopy top to the location. See Fig. 4.


Fig. 4 B


Place the completed canopy onto the top of the assembled leg posts. Make sure each crossbar is between two edges of the canopy fabric. Line up the holes, for each hole insert a bolt (Ca) through a metal washer (Cb), a bracket, short bar, another metal washer (Cb) and secure with a nut (Cc). Don't tighten completely. Repeat procedure for the remaining five short bars. Tighten all bolts and nuts. Pull down the edge of the canopy fabric and insert each bar of the canopy frame (A) into the pocket of the canopy fabric. See Fig. 5. Ca Cb

Fig. 5 A Cb Cc

Your gazebo with new canopy fabric is now ready for use. Enjoy!


Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents. Cover furniture with outdoor furniture covers when not in use.

Please refer to part numbers when reordering For questions or comments about product: Call toll-free: 800-457-4652

Made in / Hecho en CHINA for Kmart Corporation, Hoffman Estates, IL 60179 SHOP

See our extensive assortment of outdoor living products on-line at and




4 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate


Notice: fwrite(): send of 196 bytes failed with errno=104 Connection reset by peer in /home/ on line 531