Read 845.pdf text version

OIL & GAS DEVELOPMENT COMPANY LIMITED SUPPLY CHAIN MANAGEMENT DEPARTMENT

ANNEXURE 'A'

MATERIAL: PUP JOINTS AND X-OVERS TENDER ENQUIRY No. PROC-FB/CB/PROD-845/2009 _ CRITERIA:

(To be completed,

filled in,

signed and stamped by the Principal)

DUE DATE: EVALUATION

FULL CONSIGNMENT

WISE.

SCHEDULE OF REQUIREMENT

UNIT

QTY.

UNIT

VALUE C&F BY SEA

TOTAL VALUE C & F BY SEA

S.#

DESCRIPTION

PART NO.

UNIT

VALUE

FOB

DEVIATION FROM TENDER SPECS. IF ANY

1

X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", VAM ACE 17 IBS/FT (BOX) X 5-1/2",17 IBS/FT, L-80 WITH JFE BEAR, (PIN) THREAD CONNECTION X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", VAM ACE 17 IBS/FT (PIN) X 5-1/2", 17 IBS/FT, L-80 WITH JFE BEAR, (BOX) THREAD CONNECTION . X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", JFE FOX CONNECTION 17 IBS/FT (BOX) X 5-1/2",17 (PIN) THREAD IBS/FT, L-80 WITH JFE BEAR CONNECTION. X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", JFE FOX CONNECTION 17 IBS/FT (PIN) X 5-1/2", 17 (BOX) THREAD IBS/FT, L-80 WITH JFE BEAR, CONNECTION. 5-1/2", 17 LBS/FT, 13 JOINT, PUP, 3' LENGTH, CHROME,L-80, MATERIAL WITH JFE FOX, THREAD CONNECTION (PIN X BOX). JOINT, PUP, 5' LENGTH, 5-1/2", 17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE FOX, THREAD CONNECTION (PIN X BOX), JOINT, PUP, 5-1/2"XT, 17 LBS/FT, X FOX PIN X FOX BOX,TYPE JFE-HP2-13CR. IP# IASY PUP JOINTS. CONNECTION BOX X PIN. 5-1/2", 17 LBS/FT, 13 JOINT, PUP, 2' LENGTH, CHROME,L-80, MATERIAL WITH JFE BEAR, THREAD CONNECTION (PIN X BOX) . 5-1/2", 17 LBS/FT, 13 JOINT, PUP, 3' LENGTH, CHROME,L-80, MATERIAL WITH JFE BEAR, THREAD CONNECTION (PIN X BOX). JOINT, PUP, 10' LENGTH, 5-1/2", 17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE BEAR, THREAD CONNECTION (PIN X BOX). X-Over, 3-1/2" , 10.3 LBS/FT ,L-80 Material (Box) X 41/2", 12.75 Ibslft, L-80 (Pin) with Hydril's "CS" or Hunting's "TS-HP" or TPS Technitube's "TS-8" or Grant Prideco's "RTS-8" Thread Connections. X-Over, 3-1/2" , 10.3 LBS/FT ,L-80 Material (Pin) X 41/2", 12.75 Ibslft, L-80 (Box) with Hydril's "CS" or Hunting's "TS-HP" or TPS Technitube's "TS-8" or Grant Prideco's "RTS-8" Thread Connections.

8

NOS.

2

./

8

NOS.

3

12

NOS.

4

12

NOS.

5

8

NOS.

6

8

NOS.

7

8

NOS.

8

.··· 1-..

4

NOS.

Y

4 NOS.

9

10

4

NOS.

11

15

NOS.

12

20

NOS.

Technical Data sheet for the Purchase of Pup Jonts and X-overs required for upcoming Uch-II Project and other Wells. (PROD/PED/XFL/OO2/09)

Sr#

Description

X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", VAM ACE 17 IBS/FT (BOX) X 5-1/2", 17 IBS/FT, L-80 WITH JFE BEAR, (PIN) THREAD CONNECTION X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", VAM ACE 17 IBS/FT (PIN) X 5-1/2",17 IBS/FT, L-80 WITH JFE BEAR, (BOX) THREAD CONNECTION. X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", JFE FOX CONNECTION 17 IBS/FT (BOX) X 5-1/2", 17IBS/FT, L-80 WITH JFE BEAR, (PIN) THREAD CONNECTION. X-OVER, 13 CHROME, L-80 MATERIAL WITH 5-1/2", JFE FOX CONNECTION 17 IBS/FT (PIN) X 5-1/2",17 IBS/FT, L-80 WITH JFE BEAR, (BOX) THREAD CONNECTION. JOINT, PUP, 3' LENGTH, 5-1/2",17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE FOX, THREAD CONNECTION (PIN X BOX). JOINT, PUP, 5' LENGTH, 5-1/2",17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE FOX, THREAD CONNECTION (PIN X BOX), JOINT, PUP, 7' LENGTH, 5-1/2",17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE FOX, THREAD CONNECTION (PIN X BOX), JOINT, PUP, 2' LENGTH, 5-1/2",17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE BEAR, THREAD CONNECTION (PIN X BOX). JOINT, PUP, 3' LENGTH, 5-1/2",17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE BEAR, THREAD CONNECTION (PIN X BOX). JOINT, PUP, 10' LENGTH, 5-1/2",17 LBS/FT, 13 CHROME,L-80, MATERIAL WITH JFE BEAR, THREAD CONNECTION (PIN X BOX). X-Over, 3-1/2", 10.3LBS/FT L-80 Material (Box) X 4-1/2", 12.75Ibs/ft, L-80 (Pin) with Hydril's "CS" or Hunting's "TS-HP" or TPS Technitube's "TS-8" or Grant Prideco's "RTS-8" Thread Connections". X-Over, 3-1/2",10.3 LBS/FT ,L-80 Material (Pin) X 4-1/2", 12.75Ibs/ft, L-80 (Box) with Hydril's "CS" or Hunting's "TS-HP" or TPS Technitube's "TS-8" or Grant Prideco's "RTS-8" Thread Connections".

Quantity

1

8 Number

2

12 Number

3

12 Number

4

12 Number

5

8 Number 8 Number 8 Number

04 Numbers 04 Numbers 04 Numbers

6 7 8

9 10

J

15 Number

11

12

20 Number.

Note: - All the bidders are required to comply with the clauses mentioned below and provide all the necessary documents/Licences and certificates along with the bids other wise their technical bids will be summarily reiected without seekin2 any clarifications.

1. Evaluation will be on complete package basis.

\All

.~

Technical Data sheet for the Purchase of Pup Jonts and X-overs required for upcoming Uch-II Project and other Wells. (PROD/PED/XFL/OO2/09) 2. The required delivery period is 20 weeks on C& F Karachi,the prices of the Bidders quoting longer delivery periods will be loaded according to the clause 24 of the tender documents. 3. The required length for all the X-Overs Should be between 2 to 3 feet.

4. For Serial No 11& 12, X-overs with the following connections of the specified manufacturers will be acceptable: Hydril's "PH-6"/Cs or Hunting's "TS-HD"/TSHP or TPS Technitube's "TS-6"/TS-8 or Grant Prideco's "RTS-6"/RTS-8 Thread Connections." 5. The, Pup joints & X-Overs must conform to API Spec. 5CT.

6. Pup joint & X-Over ends should be provided with proper thread protectors and protected against rust during shipment by application of proper compound on threads. 7. Pup Joints & X-Overs should be provided with mills protective coating bundled and strapped as per API handling procedures. on the outside,

The bidder to arrange third party inspection of the shipment and submit the detailed inspection 8. reports (of individual item) along with the shipping documents. The cost of third party inspection should be included in the quoted price. 9. The bidder to provide mill test certificate along with the shipping documents. Bidder to provide the API 5CT certificates for the last five years for the X-Over and Pup 10. Joints Manufacturer and the threader (in case they are different) to prove their five -years experience. 11. The threader should have a copy of the Valid License issued by OEM to cut the quoted threads i.e TPS Technitube,Hydril/Tenaris,Hunting,Grant Prideco/Atlas Bradford,V&M & JFE Steel Corporation.Copy of license to be submitted alonq with the bid.

Information

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

342150


Notice: fwrite(): send of 206 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531