Read Microsoft Word - New Parts Catalog 2008.doc text version

1 1

OSMUNDSON MFG. CO.

PARTS CATALOG

ST 16082 141ST PERRY, IOWA ERRY OWA 800-824-6661 515-465-2126- FAX FAX WWW.OSMUNDSON.COM W W W OS M U N D S O N C O M

TABLE OF CONTENTS

PRODUCTS

SWEEPS

FIELD CULTIVATOR SWEEPS -----------------------------------------------------------------------------FIELD CULTIVATOR APPLICATION CHART -------------------------------------------------------------ROW CROP SWEEPS ----------------------------------------------------------------------------------------MARATHON/DELTA BUSTER SWEEPS --------------------------------------------------------------------CHISEL PLOW SWEEPS ------------------------------------------------------------------------------------AGGRESSOR CHISEL PLOW SWEEPS --------------------------------------------------------------------CHISEL PLOW APPLICATION CHART --------------------------------------------------------------------HEEL SWEEPS/CP SWEEPS/SUB-SOILERS ----------------------------------------------------------------3, 4 & 5 6&7 8 9 10 11 12 & 13 14

2 2

PAGE #

DANISH

OK SWEEPS ------------------------------------------------------------------------------------------------- 15 S-TINES ------------------------------------------------------------------------------------------------------ 15 CLAMPS ------------------------------------------------------------------------------------------------------- 15

SPIKES/POINTS

SPEAR POINT SHOVELS -----------------------------------------------------------------------------------QUACKERS -------------------------------------------------------------------------------------------------SPRING TOOTH POINT -------------------------------------------------------------------------------------CHISEL PLOW SPIKES -------------------------------------------------------------------------------------TWISTED CHISEL SPIKES ---------------------------------------------------------------------------------BULL TONGUE ----------------------------------------------------------------------------------------------CARBIDE DRILL POINTS ----------------------------------------------------------------------------------16 16 16 17 18 19 19

DISC BLADES

REGULAR DISC BLADES ----------------------------------------------------------------------------------NOTCHED DISC BLADES ----------------------------------------------------------------------------------DISC BLADE APPLICATION CHART -----------------------------------------------------------------------20 21 22 & 23

COULTER BLADES

PLAIN, WAVY, FLUTED, BUBBLE BLADES ---------------------------------------------------------------COULTER APPLICATION CHART ---------------------------------------------------------------------------24 25 & 26

MOLDBOARD PLOWS

INTRODUCTION ---------------------------------------------------------------------------------------------RIB SHARES/ROCK SHARES ------------------------------------------------------------------------------PLOW SHARE REFERENCE SHEETS ----------------------------------------------------------------------PLOW SHARE SPECS ----------------------------------------------------------------------------------------SHINS ---------------------------------------------------------------------------------------------------------LANDSIDES/WEAR PADS ------------------------------------------------------------------------------------REFERENCE SHEETS -----------------------------------------------------------------------------------------27 28 & 29 30 & 31 32 & 33 35 36 37-44

SUB-SOILER POINTS ------------------------------------------------------------------------------------ 45 WARRANTY INFORMATION --------------------------------------------------------------------------- 46

3 3

FIELD CULTIVATOR SWEEPS NEVER NARROWS PLAIN AND HARD FACED

(47O STEM ANGLE 3/8" BOLT HOLES)

NEVER NARROWS

Always Keeps Its Width

FCDF SERIES

47O STEM ANGLE, 3/8" PUNCH. SEE APPLICATION CHART ON PAGE 5 & 6. USE 3/8" X 1 1/4" NO. 3 HEAD BOLTS. 1 5/8" TO 1 3/4" HOLE SPACING. ADD "HF" TO PART NUMBER WHEN ORDERING HARD-FACED.

PART # 4-FCDF-4-47 6-FCDF-4-47 7-FCDF-4-47 8-FCDF-4-47 9-FCDF-4-47 10-FCDF-4-47 12-FCDF-4-47

SIZE 4" 6" 7" 8" 9" 10" 12"

THICKNESS 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

PCS/BNDL 10 10 10 10 10 10 10

WGT/BNDL 18.00 lbs. 21.50 lbs. 24.00 lbs. 26.50 lbs. 28.50 lbs. 31.00 lbs. 35.25 lbs.

WILL FIT:

ANDERSON BUSH HOG C.C.I.L. 179 379 Z CASE FC FCM FCSW COCKSHUTT 285 AND 485 FORD 208 GLENCOE 101 KEWANEE KRAUSE 600 AND 900 LEON VIBRA FLEX MASSEY FERGUSON 160 MINNEAPOLIS MOLINE FT 200 MORRIS L240 AND L320 OLIVER 285, 385, 485 TAYLOR WHITE

4 4

FIELD CULTIVATOR SWEEPS NEVER NARROWS PLAIN AND HARD FACED

(47 STEM ANGLE 7/16" BOLT HOLES)

O

NEVER NARROWS

WILL FIT:

BOURGAULT BRADY AFTER 1971 BRILLION AFTER 1986 CALKINS CASE/IHC 45 AND VIBRA SHANK CRUSTBUSTER DAKON DEERE 940-960-980-985 726 MULCH FINISHER DEGELMAN DMI EZEE-ON FARMERS FACTORY FLEXI-COIL 200-400 FRONTIER GLENCOE 4300 HESSTON HINIKER INGHAM KENT KRAUSE 4200, 4250, 3100 & 6100 LANDOLL M&W 724 MASSEY HARRIS MF 259 NOBLE RHINO (ATHENS) SUNFLOWER WIL-RICH WINPOWER 1500

Always Keeps Its Width

FCH SERIES

47O STEM ANGLE, 7/16" PUNCH. SEE APPLICATION CHART ON PAGE 5 & 6. USE 7/16" X 1 1/4" NO. 3 HEAD BOLTS. 1 5/8" TO 1 3/4" HOLE SPACING. ADD "HF" IN FRONT OF PART NUMBER WHEN ORDERING HARD-FACED. PART # 4-FCH-4-47 6-FCH-4-47 7-FCH-4-47 8-FCH-4-47 9-FCH-4-47 10-FCH-4-47 11-FCH-4-47 12-FCH-4-47 SIZE 4" 6" 7" 8" 9" 10" 11" 12" THICKNESS 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" PCS/BNDL 10 10 10 10 10 10 10 10 WGT/BNDL 18.00 lbs. 21.50 lbs. 24.00 lbs. 26.50 lbs. 28.50 lbs. 31.00 lbs. 33.00 lbs. 35.25 lbs.

5 5

FIELD CULTIVATOR SWEEPS NEVER NARROWS PLAIN AND HARD FACED

(40 STEM ANGLE 3/8" BOLT HOLES)

O

NEVER NARROWS

Always Keeps Its Width

FCO SERIES

40O STEM ANGLE, 3/8" PUNCH. SEE APPLICATION CHART ON PAGE 5 & 6. USE 3/8" X 1 1/4" NO. 3 HEAD BOLTS. 1 5/8" TO 1 3/4" HOLE SPACING. ADD "HF" IN FRONT OF PART NUMBER WHEN ORDERING HARD-FACED. WILL FIT: ALLIS (EARLY MODELS) BAKER BRADY (PRIOR TO `70-'71) BRILLION (PRIOR TO 1986) COCKSHUTT (EARLY MODELS) DEERE (CCA, CC10, CC20 AND 1000 SERIES) GLENCOE (1250 DOUBLE SHANK) KRAUSE (K-TINE) OLIVER (245 AND 345)

PART # 4-FCO-4-40 6-FCO-4-40 7-FCO-4-40 8-FCO-4-40 9-FCO-4-40 10-FCO-4-40 12-FCO-4-40

SIZE 4" 6" 7" 8" 9" 10" 12"

THICKNESS 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

PCS/BNDL 10 10 10 10 10 10 10

WGT/BNDL 18.00 lbs. 21.50 lbs. 24.00 lbs. 26.50 lbs. 28.50 lbs. 31.00 lbs. 35.25 lbs.

6 6

OSMUNDSON

FIELD CULTIVATOR APPLICATION CHART

Allis Chalmers Allis Chalmers (Early Models) Anderson Baker Bourgault Brady (after `70-'71) Brady (prior to `70-'71) Brillion Brillion (Prior to 1986) Buffalo No Till Applicators Bush Hog C.C.I.L. 179, 379, 200 Calkins Case Case, FC, FCM, FCSW Case/IHC 45 and Vibra Shank Cockshutt (Early Models) Cockshutt 237-239-337 Cockshutt 285, 485 CrustBuster Dakon Deere 1600 Series 726, 940-960, 980, 985 Deere CCA, CC10, CC20, 1000 Degelman DMI Ezee-On Farmers Factory Flexi-Coil 200, 400 Ford 208 Forrest City Du-All Frontier (2) 7/16" (2) 3/8" (2) 3/8" (2) 3/8" (2) 7/16" (2) 7/16" (2) 3/8" (2) 7/16" (2) 3/8" (2) 7/16" (2) 3/8" (2) 3/8" (2) 7/16" (2) 7/16" (2) 3/8" (2) 7/16" (2) 3/8" (2) 7/16" (2) 3/8" (2) 7/16" (2) 7/16" (2) 7/16" (2) 3/8" (2) 7/16" (2) 7/16" (2) 7/16" (2) 7/16" (2) 7/16" (2) 3/8" (2) 7/16" (2) 7/16" 2" CC 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 2" CC 1 3/4" 1 3/4" 1 3/4" 2" CC 1 3/4" 1 3/4" 1 3/4" 2" CC 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 2" CC 1 3/4" CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC 54 40 47 40 47 47 40 47 40 54 47 47 47 54 47 47 40 54 47 47 47 47 40 47 47 47 47 47 47 54 47 degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees HSS FCO FCDF FCO FCH FCH FCO FCH FCO HSS FCDF FCDF FCH HSS FCDF FCH FCO HSS FCDF FCH FCH FCH FCO FCH FCH FCH FCH FCH FCDF HSS FCH

*ALL FCDF SERIES SWEEPS MAY BE INTERCHANGED WITH FCH SERIES USING SPECIAL BOLT WITH 3/8" BODY AND 7/16" HEAD.

7 7

OSMUNDSON

FIELD CULTIVATOR APPLICATION CHART

Glencoe (old) 1250 Double Shank Glencoe 4300 Glencoe, FC, MFC, FCSW 101 Hesston Hiniker IHC 45 Ingham Kent Kewanee Krause (K-Tine) Krause 4200, 4250, 3100, 6100 Krause 600/900 Landoll Leon Vibra Flex M&W Massey Ferguson 160 Massey Ferguson 259 Massey Harris Minneapolis Moline FT200 Minntoba LDC 726-729 Morris L240, L320 Noble Oliver 245, 345 Oliver 285, 385, 485 Rhino/Athens Sunflower Taylor White Farm Equipment Wil-Rich Win Power 1500 (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) 3/8" 7/16" 3/8" 7/16" 7/16" 7/16" 7/16" 7/16" 3/8" 3/8" 7/16" 3/8" 7/16" 3/8" 7/16" 3/8" 7/16" 7/16" 3/8" 7/16" 3/8" 7/16" 3/8" 3/8" 7/16" 7/16" 3/8" 3/8" 7/16" 7/16" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 2" CC 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC CC 40 47 47 47 47 47 47 47 47 40 47 47 47 47 47 47 47 47 47 54 47 47 40 47 47 47 47 47 47 47 degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees FCO FCH FCDF FCH FCH FCH FCH FCH FCDF FCO FCH FCDF FCH FCDF FCH FCDF FCH FCH FCDF HSS FCDF FCH FCO FCDF FCH FCH FCDF FCDF FCH FCH

*ALL FCDF SERIES SWEEPS MAY BE INTERCHANGED WITH FCH SERIES USING SPECIAL BOLT WITH 3/8" BODY AND 7/16" HEAD.

8 8

ROW CROP CULTIVATOR SWEEPS

(54 STEM ANGLE 7/16" BOLT HOLES 5/8" CENTER HOLE)

O

PLAIN AND HARD FACED

Always Keeps Its Width

NEVER NARROWS

THESE SWEEPS ARE PUNCHED WITH THREE HOLES. TWO ON 2'' CENTER FOR 7/16'' BOLT AND 1 ¾ #3 HEAD BOLTS. THE CENTER HOLE IS SQUARE FOR A 5/8 X 1 ¾ CARRIAGE BOLT. THE HIGH SPEED ROW CROP SWEEP IS MADE WITH A 54 DEGREE SHANK ANGLE. FOR HARD-FACED SWEEPTS AD "HF" IN FRONT OF THE

NUMBER

SIZE

4" x 1/4" Full Sweep 6" x 1/4" Full Sweep 6" x 1/4" Left Half Sweep 6" x 1/4" Right Half Sweep 8" x 1/4" Full Sweep 8" x 1/4" Left Half Sweep 8" x 1/4" Right Half Sweep 10" x 1/4" Full Sweep 10" x 1/4" Left Half Sweep 10" x 1/4" Right Half Sweep 12" x 1/4" Full Sweep 14" x 1/4" Full Sweep 16" x 1/4" Full Sweep 18" x 1/4" Full Sweep

PART #

4HSS4 6HSS4 6HSS4-LH 6HSS4-RH 8HSS4 8HSS4-LH 8HSS4-RH 10HSS4 10HSS4-LH 10HSS4-RH 12HSS4 14HSS4 16HSS4 18HSS4

PCS/BDL

10 10 10 10 10 10 10 10 10 10 10 10 10 10

WGT./BDL. 18.00 lbs. 21.50 lbs. 14.40 lbs. 14.40 lbs. 26.50 lbs. 20.50 lbs. 20.50 lbs. 31.00 lbs. 21.10 lbs. 21.10 lbs. 35.25 lbs. 44.00 lbs. 47.00 lbs.

53.00 lbs.

9 9

MARATHON/DELTA BUSTER SWEEPS

· SELF-SHARPENING · LONG LASTING CHISEL NOSE · EXTENDED LIFE BY 2 TO 3 TIMES A

REGULAR SWEEP

· CHISEL AND CULTIVATOR

APPLICATIONS

MARATHON SERIES

SPECIAL ORDERS AND SIZES AVAILABLE FOR QUOTATION. CONTACT CUSTOMER SERVICE. LISTED IS OUR STANDARD SIZES AND AVAILABLITIES. PART # 7 M 4-47 8 M 4-47 9 M 4-47 10 M 4-47 SIZE 7" 8" 9" 10" THICKNESS 1/4" 1/4" 1/4" 1/4" PCS/BNDL 5 5 5 5 WGT/BNDL 15 lbs. 17.25 lbs. 21.25 lbs. 21.50 lbs.

DELTA-BUSTER SWEEPS

SPECIAL ORDERS AND SIZES AVAILABLE FOR QUOTATION. CONTACT CUSTOMER SERVICE. LISTED IS OUR STANDARD SIZES AND AVAILABLITIES. PART # ODB-6 ODB-7 ODB-9 ODB-10 ODB-11 ODB-12 SIZE 6" 7" 9" 10'' 11'' 12'' THICKNESS 1/4" 1/4" 1/4" 1/4'' 1/4" 1/4" PCS/BNDL 5 5 5 5 5 5 WGT/BNDL 15 lbs. 15.25 lbs. 21.25 lbs. 21.50lbs 23.00lbs 23.50lbs

10 10

HEAVY DUTY CHISEL PLOW SWEEPS

PLAIN AND HARD FACED

AVAILABLE WITH AGGRESSOR NOSE BY SPECIAL ORDER.

The LC (low crown) series sweep has a 50o shank angle. The holes are punched on 2 1/4" centers and use two 1/2" x 2" #3 head bolts. DESCRIPTION 14" low crown sweep 16" low crown sweep 18" low crown sweep 20" low crown sweep 22" low crown sweep 24" low crown sweep 26" low crown sweep PART # 14LC50o 16LC50o 18LC50o 20LC50o 22LC50o 24LC50o 26LC50o BNDL 5 5 5 1 1 1 1 WGT/BNDL 25.0 lbs. 32.0 lbs. 35.0 lbs. 9.00 lbs. 11.0 lbs. 12.0 lbs. 12.5 lbs.

LOW CROWN 50O SHANK ANGLE

The H series are used on IHC and have a 43o shank angle. The holes are punched on 2 1/4" to 2 1/2" centers and use two 1/2" x 2" #3 head bolts. DESCRIPTION 10" sweep 12" sweep 14" sweep 16" sweep 18" sweep PART # 10H43o 12H43o 14H43o 16H43o 18H43o BNDL 5 5 5 5 5 WGT/BNDL 23 lbs. 24 lbs. 25 lbs. 32 lbs. 35 lbs. 10" 12" 14" 16" 18"

43o SHANK ANGLE

All Osmundson MC (Medium Crown) series are offered in two hole punchings: 7/16" bolt on 2 1/4" hole spacing and 1/2" bolt on 2 1/4" hole spacing. Please specify bolt hole size when ordering. Available plain and hard faced. Add "HF" to part number when ordering hard faced. 5/16" thickness quoted on request. See application chart. DESCRIPTION medium crown sweep medium crown sweep medium crown sweep medium crown sweep medium crown sweep PART # 10MC50o 12MC50o 14MC50o 16MC50o 18MC50o BNDL 5 5 5 5 5 WGT/BNDL 23 lbs. 24 lbs. 25 lbs. 32 lbs. 35 lbs.

MEDIUM CROWN 50O SHANK ANGLE

The holes are punched on 2 1/4" centers and use two 1/2" x 2" #3 head bolts. Available plain and hard faced. Add "HF" to part number when ordering hard faced. 5/16" thickness quoted upon request. See application chart. DESCRIPTION 14" medium crown sweep 16" medium crown sweep 18" medium crown sweep PART # 14MC47o 16MC47o 18MC47o BNDL 5 5 5 WGT/BNDL 25 lbs. 32 lbs. 35 lbs.

MEDIUM CROWN 47O SHANK ANGLE

11 11

AGGRESSOR

NEVER NARROWS CHISEL PLOW SWEEP

IHC 43O SHANK ANGLE 90O NOSE ANGLE

The holes are punched on 2 1/4" to 2 1/2" centers and use two 1/2" x 2" #3 head bolts. See application chart on page 23.

MEDIUM CROWN 50O SHANK ANGLE

The holes are punched on 2 1/4" centers and use 7/16" x 2" #3 head bolts. DESCRIPTION 14" medium crown sweep 16" medium crown sweep 18" medium crown sweep PART # 14 AG 50o 16 AG 50o 18 AG 50o BNDL 5 5 5 WGT/BNDL 32.0 lbs. 35.5 lbs. 39.0 lbs.

DESCRIPTION 14" sweep 16" sweep 18" sweep

PART # 14 AG 43o 16 AG 43o 18 AG 43o

BNDL 5 5 5

WGT/BNDL 32.0 lbs. 35.5 lbs. 39.0 lbs.

BOLTS FOR SHARES AND SHINS BOLTS FOR SWEEPS AND SPIKES

#3 Head Sweep Bolts Without Nuts SIZE PACKING 7/16" x 2 1/2" 50 per box 7/16" x 2" 50 per box 7/16" x 1 3/4" 50 per box 7/16" x 1 1/4" 50 per box 3/8" x 1 1/4" 50 per box 1/2" x 2" 50 per box 1/2" x 3" 25 per box 5/8" x 2" 25 per box 5/8" x 2 1/2" 50 per box 1/2" x 7/16" x 2 1/2" 50 per box 7/16" x 3/8" x 1 1/4" 50 per box OK Bolts (Elliptical Head with Nuts) 3/8" x 1 1/2" #8 Head 50 per box WEIGHT 5.5 lbs. 4.5 lbs. 4.5 lbs. 3.0 lbs. 2.0 lbs. 7.5 lbs. 4.0 lbs. 6.25 lbs. 7.25 lbs. 5.0 lbs. 2.0 lbs. 3.25 lbs. Clipped Head Plow Bolts For Shares & Shins Without Nuts SIZE PACKING WEIGHT 3/8" x 1 3/16" 50 per box 4.0 lbs. 7/16" x 1 1/4" 50 per box 2.75 lbs. 1/2" x 1 3/8" 50 per box 4.0 lbs. 16mm x 40mm 18 bolts & nuts per box 2.0 lbs. Nuts For Bolts 3/8" 50 per box 1.0 lbs. 7/16" 50 per box 1.5 lbs. 1/2" 50 per box 3.25 lbs. All bolts are grade #5, heat treated.

12 12

CHISEL PLOW SWEEPS APPLICATION CHART

OSMUNDSON SWEEPS MAY BE USED TO FIT SOME APPLICATIONS BY USING A BOLT THAT HAS A 1/2" HEAD ­ 7/16" THREADED BODY. NOTE: SINCE SUCH TIME AS THIS INFORMATION WAS OBTAINED, SEVERAL MANUFACTURERS HAVE SWITCHED TO 1/2" PUNCHED SHANKS. A"SPECIAL BOLT" WILL ENABLE INVENTORY OF 1/2" PUNCHED SWEEPS TO FIT 7/16" PUNCHED SHANKS. THE "SPECIAL BOLT" IS AVAILABLE IN 2" AND 2 1/2" LENGTHS. MANUFACTURED BY Allis Chalmers 22"-32" Anderson Brady Brillion Case (Some) Case (Later Models) Case 700, 900, 110 C.C.I.L. Thick Shank C.C.I.L. 1 1/4" Thick Shank Cockshutt 240, 246, 247, 476, 249 Crown DMI Degelman Dempster Edwards Flexi-Coil (2" x 1" Shank) Ford Ford 131 Friggstad Glencoe Glencoe High Clearance Graham Low Clearance Graham High Clearance Gysler Hiniker IHC-#3 IHC-10, 50, 55, 75, 64 S Ingham Jeoffroy ­ 16" Jeoffroy ­ 22" ­ 32" John Deere John Deere 650 Coil STEM ANGLE 43o 50o 50o 40 47o 50o 54o 50o 43o 50o 50o 50o 50o 54o 50o 50o 47o 50o 50o 47o 50o 54o 50o 47o 50o 54o 43o 43o 50o 43o 50o 54o HOLE SIZE 7/16" 7/16" 7/16" ½ 1/2" 7/16" 7/16" 7/16" 1/2" 7/16" 1/2" 1/2" 7/16" 7/16" 7/16" 1/2" 1/2" 7/16" 7/16" 1/2" 7/16" 7/16" 7/16" 1/2" 1/2" 7/16" 1/2" 7/16" 7/16" 7/16" 1/2" 7/16" HOLE CENTERS 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" SWEEPS SERIES H43 MC50 MC50 H431/2 MC47 MC50 N/A MC50 H43 MC50 MC50 MC50 MC50 N/A MC50 MC50 MC47 MC50 MC50 MC47 MC50 N/A MC50 MC47 MC50 N/A H43 H43 MC50 H43 MC50 N/A

13 13

CHISEL PLOW SWEEPS APPLICATION CHART

STEM ANGLE 47o 50o 47o 50o 54o 50o 43o 54o 50o 50o 43o 47o 54o 50o 50o 43o 43o 43o 50o 50o 43o 43o 50o 50o 50o 54o 50o 50o 43o 50o 54o 50o HOLE SIZE 1/2" 7/16" 1/2" 7/16" 7/16" 1/2" 7/16" 7/16" 7/16" 7/16" 7/16" 1/2" 7/16" 1/2" 7/16" 7/16" 1/2" 7/16" 1/2" 7/16" 7/16" 7/16" 7/16" 7/16" 1/2" 7/16" 7/16" 7/16" 7/16" 1/2" 7/16" 1/2" HOLE CENTERS 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" SWEEPS SERIES MC47 MC50 MC50 MC50 N/A MC50 H43 N/A MC50 MC50 H43 MC47 N/A MC50 MC50 H43 H43 H43 MC50 MC50 H43 H43 MC50 MC50 MC50 MC50 MC50 MC50 H43 MC50 N/A MC50

MANUFACTURED BY John Deere (Some) Kewanee Krause (Low Clearance) Krause (High Clearance) Krause (Some) Leon Massey Harris Massey Ferguson 128 Massey "Trash King" Mel-Cam Mel-Cam Cultiweeder Melroe (Clark) Minneapolis Moline T-500 Minneapolis Moline T600, 1500, 1800 Minn-Toba 120, 176 Minn-Toba 3 point hitch Mohawk Morris 220 Morris MP 912 & Magnum Noble XR-20 Oliver 247, 248, 347 U.S. Oliver 500, 3500 Robin/Nodwell Rogin Roll-A-Cone Roll-O-Flex Schulte 300 Sunflower Versatile Victory Wil-Rich Wil-Rich (Early)

14 14

HEEL SWEEPS

THE HEEL SWEEP

TIME. CHISEL PLOW SPIKE BOLTS ON THE FRONT IN COMBINATION WITH THE SWEEP. IS DESIGNED TO FIT OVER THE TOP OF THE CHISEL PLOW SHANK.

A THIS

COMBINATION ALLOWS BOTH CHISELING AND CULTIVATING OPERATIONS AT THE SAME

ADJUSTMENTS CAN BE MADE WHEN THE SWEEP IS MOUNTED.

THE CHISEL PLOW FRAME IS LEVEL.

THE

SWEEP SHOULD BE MOUNTED SO THAT THE WINGS OF THE SWEEP ARE LEVEL WHEN

THE

SWEEP HAS SLOTTED HOLES SO THAT LEVELING

SWITCH PLOW

MODEL HARRELL DEERE LONG BAKER OEM OSMUNDSON PART # PART # 79006 OSP Harrell 57270 OSP Deere 791406 OSP Long SB100 OSP Baker BOLT USED 1/2 x 1 3/8 P.B. 1/2 x 1 3/8 P.B. 1/2 x 1 3/8 P.B. 9/16 x 1 3/8 P.B. WGT/ BNDL 60 lbs 60 lbs. 63 lbs. 63 lbs.

CP SWEEPS

5/16" THICKNESS AVAILABLE. PUNCHED ON 2 1/4" CENTERS FOR EITHER 7/16" OR 1/2" BOLTS. PART # 6 CP4-12 8 CP4-12 BNDL 5 5 WGT/BNDL 15 lbs. 15 lbs.

1L

1L FOR HAMBY, ROLL-A-CONE, BIGHAM, JOHNSON, HOWARD AND TEXAS RIPPOR, STANDARD TOOTH BOX SCRAPER. DESCRIPTION 1L BUNDLING 1 WEIGHT 2 lbs.

COTTON POINT

DESCRIPTION Cotton Point BUNDLING 1 WEIGHT 7.5 lbs.

BIG OX POINTS

DESCRIPTION OX-1 BUNDLING WEIGHT 1 3 lbs.

15 15

SOIL FINISHING MACHINES REQUIRING S-TINES

ALLIS CHALMERS ­ 1200 ­ 1300 BECKER / ATI BER VAC BUCKEYE KOEHN KONGSKILDE NOBLE MIX-N-TILL UNVERFERTH CULTI-SYSTEM VICON / MCKEE

S-Tine Clamps DESCRIPTION

2" x 2" 2.5" x 2.5"

WHAT IT FITS

32 x 10 x 560 mm standard 32 x 12 x 660 mm high clearance

S-T INES

DESCRIPTION

Standard Heavy Standard High Clearance

WIDTH

32 mm (1.25 in.) 32 mm (1.25 in.) 32 mm (1.25 in.)

THICKNESS

10 mm (0.394 in.) 12 mm (0.422 in.) 12 mm (0.422 in.)

HEIGHT

560 mm (22 in.) 560 mm (22 in.) 660 mm (26 in.)

WEIGHT

5.95 lbs. 8.00 lbs. 8.81 lbs.

S-tines, clamps and bolts made to demanding OEM specifications. Tines are made from high quality spring steel with rounded edges ­ shot peened and painted black.

OK SWEEPS

DESCRIPTION

1" TOOTH 2 3/4" Sweep 4" Sweep 7" Sweep 9" Sweep

PART #

OK1 OK 2 3/4 OK4 or OK4V OK7 OK9 3/8" 3/8" 3/8" 3/8" 3/8" x x x x x 1 1 1 1 1

BOLTS USED

1/2" 1/2" 1/2" 1/2" 1/2" Elliptical Elliptical Elliptical Elliptical Elliptical Head Head Head Head Head Bolt Bolt Bolt Bolt Bolt

BUNDLING

10 10 10 10 10

WEIGHT/BNDL

7.5 lbs. 8 lbs. 11 lbs. 13 lbs. 23 lbs.

All OK Sweeps are 1/4" thick. The OK Sweeps are made to fit the Danish S-tine and other field preparation equipment of this type. Add "HF" to part number when ordering hard faced.

16 16

SPRING TOOTH

DESCRIPTION 2 1/2" x 5/16" x 11" 2" x 5/16" x 11" 2" x 5/16" x 11" PART # 210A 211 211D

PLAIN AND HARD FACED

THESE CULTIVATOR POINTS ARE PUNCHED WITH A HOLE AND A SLOT TO FIT 1" TO 2" SPACINGS. MADE FROM STURDY 5/16" FLAT STOCK FOR LONG DEPENDABILITY. PLATED AND SHARPENED FOR BETTER WEAR. ADD "HF" TO PART NUMBER WHEN ORDERING HARD FACED.

BOLTS USED Two 7/16" x 1 1/4" #3 head Two 7/16" x 1 1/4" #3 head Two 3/8" x 1 1/4" #3 head BUNDLING 25 25 25 WEIGHT/BNDL 50 lbs. 40 lbs. 40 lbs.

QUACKERS

PLAIN AND HARD FACED

ALL QUACKERS ARE PUNCHED WITH A HOLE AND A SLOT TO FIT 1 5/8" OR 2" HOLE SPACING. MADE FROM FLAT STOCK MATERIAL A FULL 5/16" THICK TO GIVE THESE QUACKERS THAT EXTRA MEASURE OF DEPENDABILITY AND LONGER LIFE. ADD "HF" TO PART NUMBER WHEN ORDERING HARD FACED.

DESCRIPTION 1 3/4" x 5/16" x 10" 1 3/4" x 5/16" x 10" 2" x 5/16" x 10" PART # 103 107 203 BOLTS USED Two 3/8" x 1 1/4" #3 head Two 7/16" x 1 1/4" #3 head Two 3/8" x 1 1/4" #3 head BUNDLING 25 25 25 WEIGHT/BNDL 31 lbs. 31 lbs. 34 lbs.

SPEAR POINT SHOVELS PLAIN AND HARD FACED

PUNCHED ON 1 5/8" TO 2" CENTER TO FIT ALL CULTIVATORS. MADE FROM 1/4" HEAT TREATED STEEL. ADD "HF" TO PART NUMBER WHEN ORDERING HARD FACED.

DESCRIPTION 1/4" x 5" PART # 845 BOLTS USED Two 7/16" x 1 1/4" #3 head BUNDLING 10 WEIGHT/BNDL 18 lbs.

17 17

CHISEL PLOW SPIKES

USING 2 1/4" - 2 1/2" CENTERS ­ STRAIGHT CHISEL SPIKES UPSET AND FLAT NOSE PLAIN AND HARD FACED

THE 1878 AND 1858 SERIES REVERSIBLE SPIKES HAVE UPSET (SWEDGE) POINTS FOR INCREASED WEAR AND LONGER LIFE. EVEN AFTER CONSIDERABLE USE, THESE SPIKES RETAIN THEIR ORIGINAL SHAPE AND STAY SHARP. THE 582 SERIES REVERSIBLE SPIKES HAVE FLAT FORGED POINTS SEEN ON MOST ORIGINAL EQUIPMENT.

OSMUNDSON PART # 1878-1/2 1858-1/2 582-1/2 C-78 4516 OVERALL SIZE: THICKNESS x WIDTH x LENGTH 7/8" x 2" x 18" 5/8" x 2" x 18" 5/8" x 2" x 18" 7/8" x 2" x 15 1/2" 1/4" x 4 1/2" x 16" NOSE STYLE Upset Upset Flat Chromium Carbide Furrower BOLT SIZE 1/2" 1/2" 1/2" 1/2" 1/2" BOLT SPACING 2 1/4"-2 1/2" 2 1/4"-2 1/2" 2 ¼ only 2 1/4"-2 1/2" 2 1/4"-2 1/2" BNDL 5 5 5 5 5 WGT/BNDL 37 lbs. 28 lbs. 28 lbs. 33 lbs. 23 lbs.

Using 2 1/4" Centers ­

OSMUNDSON PART # 1878-7/16 1858-7/16 582-7/16 C-78 OVERALL SIZE THICKNESS X WIDTH X LENGTH 7/8" x 2" x 18" 5/8" x 2" x 18" 5/8" x 2" x 18" 7/8" x 2" x 15 1/2" NOSE STYLE Upset Upset Flat Chromium Carbide

Straight Chisel Spikes

BOLT SIZE 7/16" 7/16" 7/16" 7/16" BOLT SPACING 2 1/4" 2 1/4" 2 1/4" 2 1/4" BNDL 5 5 5 5 WGT/BNDL 37 lbs. 28 lbs. 28 lbs. 33 lbs.

1878 & 1858 Series

4516 Furrower

582 Series

C78 Series

18 18

TWISTED CHISELS

SLASH POINT TWISTED CHISELS

OCC AND OS SERIES PARTS ARE DESIGNED TO FIT MOST OF THE MODERN MINIMUM-TILL COULTER CHISELS ON THE MARKET TODAY. AVAILABLE ARE THE ONE-PIECE REPLACEMENT FOR THE 3-PIECE ASSEMBLY AND THE SHARE AND MOLDBOARD FOR THE 3-PIECE ASSEMBLY. IN MOST CONDITIONS, THE FARMER WILL BE ABLE TO RUN A MOLDBOARD FOR AT LEAST 2 TO 3 SHARES BEFORE CHANGING OR REVERSING THE MOLDBOARD. THE #383 SERIES ARE 3/8" THICK, 3" WIDE AND 22" IN LENGTH. THE 383-H IS PUNCHED WITH A HOLE AND SLOT TO FIT 2 1/4" TO 2 1/2" SPACING. THE #123 SERIES ARE 1/2" THICK, 3" WIDE AND 22" IN LENGTH. THE 123-H IS PUNCHED WITH A HOLE AND SLOT TO FIT 2 1/4" TO 2 1/2" SPACINGS. CH:CLIPPED HEAD

PART # SIZE HOLE SPACING BOLT SIZE WEIGHT Single Piece Chisel (will replace 3-piece) OCC124-R 1/2" x 4" x 26" 2 1/4" 1/2" 12 lbs. OCC124-L 1/2" x 4" x 26" 2 1/4" 1/2" 12 lbs. Replacement Points for 3-piece Moldboard Twist Assembly OS-SSP-R 1/2" x 4" N/A 1/2" CH 3 lbs. OS-SSP-L 1/2" x 4" N/A 1/2" CH 3 lbs. Replacement Moldboards for 3-piece Moldboard Twist Assembly OS-SSM-R 1/2" x 4" x 18" 2 1/4" 1/2" 10.5 lbs. OS-SSM-L 1/2" x 4" x 18" 2 1/4" 1/2" 10.5 lbs. Replacement Frog for 3-piece Moldboard Twist Assembly CPFL & CPFR Frog 3.5 lbs.

OCC 124

OSMUNDSON PART # 123H-L 123H-R

DESCRIPTION 3" x 1/2" x 22" left twist 3" x 1/2" x 22" right twist

BOLTS USED (2) 1/2" x 3" #3 head (2) 1/2" x 3" #3 head

BNDL 5 5

WGT/BNDL 42 lbs. 42 lbs.

OS-SSM OS-SSP

OSMUNDSON PART # 123-L 123-R

DESCRIPTION 3" x 1/2" x 22" left twist 3" x 1/2" x 22" right twist

BOLTS USED (2) 7/16"x2-1/2" #3 head (2) 7/16"x2-1/2" #3 head

BNDL 5 5

WGT/BNDL 42 lbs. 42 lbs.

123H

19 19

BULL TONGUE SHOVEL PLAIN AND HARD FACED

THESE CULTIVATOR POINTS ARE PUNCHED WITH A HOLE AND A SLOT TO FIT 1 5/8" TO 2" SPACINGS. MADE FROM STURDY 1/4" OR 5/16" FLAT STOCK FOR LONG DEPENDABILITY. ADD "HF" TO PART NUMBER WHEN ORDERING HARD FACED.

DESCRIPTION 2 1/2" x 1/4" x 10 3/4" 2 1/2" x 5/16" x 10 3/4" PART # BT14 BT15 BOLTS USED Two 3/8" x 1 1/4" #3 Head Two 3/8" x 1 1/4" #3 Head BUNDLING 25 25 WEIGHT/BNDL 37.5 lbs. 47.0 lbs.

CARBIDE DRILL POINTS

OSM PART # E1 E4 E6 ("V" Type) TO FIT IHC "Eagle Beaks" John Deere, CrustBuster, Acra Plant, Great Plains and Mighty Handy John Deere, CrustBuster, Acra Plant, Great Plains and Mighty Handy WT/EA 1.4 lbs. .8 lbs. 1.0 lbs.

REGULAR DISC BLADES

OPTIONAL HOLE PUNCHING AVAILABLE UPON REQUEST. THESE HAVE PROVEN TO BE, WITHOUT A DOUBT, ONE OF THE TOUGHEST BLADES ON THE MARKET TODAY. THESE DISC BLADES ARE STAR OR CENTER HOLE PUNCHED TO MEET YOUR DISC BLADE REQUIREMENTS BY ELIMINATING A LARGE INVENTORY. *Available in 3/16" and 5/16" material on special order with quoted lead time, minimum quantity and pricing.

20 20

REGULAR DISC BLADES

DIAMETER

16" Disc Blade 16" Disc Blade 16" Disc Blade 18" Disc Blade 18" Disc Blade 18" Disc Blade 18" Disc Blade 18" Disc Blade 18" Disc Blade 18" Disc Blade 20" Disc Blade 20" Disc Blade 20" Disc Blade 20" Disc Blade 20" Disc Blade 20" Disc Blade 20" Disc Blade 20" Disc Blade 22" Disc Blade 22" Disc Blade 22" Disc Blade 22" Disc Blade *24" Disc Blade *24" Disc Blade *24" Disc Blade *24" Disc Blade *26" Disc Blade *26" Disc Blade *26" Disc Blade *26" Disc Blade *26" Disc Blade 20" 20" 22" 22" 24" 24" 26" 26" Disc Disc Disc Disc Disc Disc Disc Disc Blade Blade Blade Blade Blade Blade Blade Blade

THICKNESS GAUGE DECIMAL

11 11 11 11 11 11 9 9 9 9 9 9 9 7 7 7 7 7 7 7 7 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 7 7 7 7 1/4" 1/4" 1/4" 1/4" 7 7 1/4" 1/4" (.118) (.118) (.118) (.118) (.118) (.118) (.138) (.138) (.138) (.138) (.138) (.138) (.138) (.177) (.177) (.177) (.177) (.177) (.177) (.177) (.177) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.177) (.177) (.177) (.177) (.250) (.250) (.250) (.250) (.177) (.177) (.250) (.250)

MM

3 3 3 3 3 3 3.5 3.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 6 6 6 6 6 6 6 6 4.5 4.5 4.5 4.5 6 6 6 6 4.5 4.5 6 6

TO FIT AXLE SIZE

7/8 sq x 1 rd 1 x 1 1/8 1 1/8 x 1 1/4 7/8 sq x 1 rd 1 x 1 1/8 1 1/8 x 1 1/4 1 x 1 1/8 1 1/8 x 1 1/4 1 1/8 rd 1 1/2 rd 1 x 1 1/8 1 1/8 x 1 1/4 1 1/2 rd 1 x 1 1/8 1 1/8 x 1 1/4 1 1/8 rd 1 1/2 rd 1 3/4 rd 1 1/8 x 1 1/4 1 1/2 rd 1 3/4 rd 1 1/2 sq 1 1/2 sq 1 1/2 rd 1 3/4 rd 2rd 1 1/4 sq 1 1/2 sq 1 1/2 rd 1 3/4 rd 2rd 1 1 1 1 1 1 1 1 1 1 1 1 1/8 1/4 1/8 1/4 1/4 1/2 1/4 1/2 1/8 1/8 1/2 1/2 sq sq sq sq sq sq sq sq sq sq sq sq

BUNDLING

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

OSMUNDSON PART #

16DB781C 16DB1118 16DB1814 18DB781C 18DB1118 18DB1814 18DB9ga1118 18DB9ga1814 18DB9ga118rd 18DB9ga112rd 20DB9ga1118 20DB9ga1814 20DB9ga112rd 20DB7ga1118 20DB7ga1814 20DB7ga118rd 20DB7ga112rd 20DB7ga134rd 22DB7ga1814 22DB7ga112rd 22DB7ga134rd 22DB112sq 24DB112sq 24DB112rd 24DB134rd 24DB200rd 26DB114sq 26DB112sq 26DB112rd 26DB134rd 26DB200rd 20CONE118sq 20CONE114sq 22CONE118sq 22CONE114sq 24CONE114sq 24CONE112sq 26CONE114sq 26CONE112sq 20FCDB7ga118sq 22FCDB7ga118sq 24FCDB112sq 26FCDB112sq

WGT/ BNDL

175 lbs. 175 lbs. 175 lbs. 220 lbs. 220 lbs. 220 lbs. 258 lbs. 258 lbs. 258 lbs. 258 lbs. 313 lbs. 313 lbs. 313 lbs. 400 lbs. 400 lbs. 400 lbs. 400 lbs. 400 lbs. 495 lbs. 495 lbs. 495 lbs. 644 lbs. 835 lbs. 835 lbs. 835 lbs. 835 lbs. 990 lbs. 990 lbs. 990 lbs. 990 lbs. 990 lbs. 400 400 520 520 835 835 990 990 400 495 835 990 lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs.

DEEP CONE DISC BLADES TO FIT JOHN DEERE

FLAT CENTER DISC BLADES TO FIT IHC

20" Disc Blade 22" Disc Blade *24" Disc Blade *26" Disc Blade

21 21

NOTCHED DISC BLADES

*Available in 3/16" and 5/16" material on special order with quoted lead time, minimum quantity and pricing.

DIAMETER N16" Disc Blade N16" Disc Blade N18" Disc Blade N18" Disc Blade N18" Disc Blade N18" Disc Blade N18" Disc Blade N18" Disc Blade N20" Disc Blade N20" Disc Blade N20" Disc Blade N20" Disc Blade N20" Disc Blade N20" Disc Blade N20" Disc Blade N22" Disc Blade N22" Disc Blade N22" Disc Blade N22" Disc Blade N22" Disc Blade *N24" Disc Blade *N24" Disc Blade *N24" Disc Blade *N24" Disc Blade *N26" Disc Blade *N26" Disc Blade *N26" Disc Blade *N26" Disc Blade *N26" Disc Blade *N24" Disc Blade *N24" Disc Blade *N26" Disc Blade N20" Disc Blade N22" Disc Blade *N24" Disc Blade *N26" Disc Blade

GAUGE 11 11 11 11 11 9 9 9 9 9 9 7 7 7 7 7 7 7 7 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 7 7 1/4" 1/4"

THICKNESS DECIMAL (.118) (.118) (.118) (.118) (.118) (.138) (.138) (.138) (.138) (.138) (.138) (.177) (.177) (.177) (.177) (.177) (.177) (.177) (.177) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.250) (.177) (.177) (.250) (.250)

MM 3 3 3 3 3 3.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6 6 6 6 6 6 6 6 6 6 6 6 6 4.5 4.5 6 6

TO FIT AXLE SIZE 7/8 sq x 1 rd 1 x 1 1/8 7/8 sq x 1 rd 1 x 1 1/8 1 1/8 x 1 1/4 1 x 1 1/8 1 1/8 x 1 1/4 1 1/2 rd 1 x 1 1/8 1 1/8 x 1 1/4 1 1/2 rd 1 x 1 1/8 1 1/8 x 1 1/4 1 1/2 rd 1 3/4 rd 1 1/8 x 1 1/4 1 1/2 sq 1 3/4 rd 1 1/2 rd 1 1/2 sq 1 1/2 sq 1 1/2 rd 1 3/4 rd 2 rd 1 1/4 sq 1 1/2 sq 1 1/2 rd 1 3/4 rd 2 rd 1 1/4 sq 1 1/2 sq 1 1/4 sq 1 1 1 1 1/8 1/8 1/2 1/2 sq sq sq sq

BUNDLING 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

OSMUNDSON PART # N16DB781C N16DB1118 N18DB781C N18DB1118 N18DB1814 N18DB9ga1118 N18DB9ga1814 N18DB9ga112rd N20DB9ga1118 N20DB9ga1814 N20DB9ga112rd N20DB7ga1118 N20DB7ga1814 N20DB7ga112rd N20DB7ga134rd N22DB7ga1814 N22DB7ga112sq N22DB7ga134rd N22DB7ga112rd N22DB112sq N24DB112sq N24DB112rd N24DB134rd N24DB200rd N26DB114sq N26DB112sq N26DB112rd N26DB134rd N26DB200rd N24CONE114sq N24CONE112sq N26CONE114sq N20FCDB7ga118sq N22FCDB7ga118sq N24FCDB112sq N26FCDB112sq

WGT/ BNDL 150 lbs. 150 lbs. 195 lbs. 195 lbs. 195 lbs. 225 lbs. 225 lbs. 225 lbs. 283 lbs. 283 lbs. 283 lbs. 365 lbs. 365 lbs. 365 lbs. 365 lbs. 460 lbs. 460 lbs. 460 lbs. 460 lbs. 588 lbs. 775 lbs. 775 lbs. 775 lbs. 775 lbs. 925 lbs. 925 lbs. 925 lbs. 925 lbs. 925 lbs. 775 lbs. 775 lbs. 925 lbs. 365 460 775 925 lbs. lbs. lbs. lbs.

DEEP CONE DISC BLADES TO FIT JOHN DEERE

FLAT CENTER DISC BLADES TO FIT IHC

O.E.M. DISC BLADE CENTER HOLE LIST

O.E.M. DISC MODEL NO.

ALLIS CHALMERS 2100 2300 AMCO WOD, WTD WOE WOF, WOJ WTF, WTJ F-15 F-15 B 48 85 148 185 248 258 ATHENS 48 62 116 126 131 BLANTON 4500 B900 B1000 3000H BURCH Kwik-Set 208 BW 209 Tru-Cut BUSH HOG 245 346 1440 1445 1450 145 146 Reg. 146 HD 1422 1424 1432 1436 1437 1438 1439 1444 Rolling Bedder

22 22

AXLE SIZE

1 1/2 Square 1 1/2 Square

O.E.M. DISC MODEL NO.

DUNHAM-LEHR GC 34 FORD 201 202 204 219 220 221 222 223 236 240 241 243 HESSTON 2410 2440 2420

AXLE SIZE

1 1/8 Square 1 1/2 Round

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Square Round Square Square Square Square Square Square Square Square Square Square

1 Round 1 Round 1 Round 1 1/2 Square 1 1/8 Square 15/16 Round 1 1/8 Square 1 1/8 Square 1 1/2 Square 1 1/8 Square 1 1/8 Square 1 1/2 Round 1 3/4 Round 1 1/8 Square 1 1/8 Square 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/2 1/2 1/2 1/2 1/2 1/2 3/4 Square Square Square Square Square Square Square Square Square Square Square Square Square Round Square Square

Square 1/8 Square 1/2 Square 1/2 Square 1/2 Square 1/2 1/8 1/8 1/2 Square Square Square Square

1 1/8 Square 1 1/2 Round 1 1/8 Square 7/8 Square 1 1/4 or 1 1/2 Square 2 1/4 Round 1 1/8 Square 1 1/8 or 1 1/4 Square 1 1/8 or 1 1/4 Square 1 1/4 Square 1 1/4 Square 1 1/2 Square 1 or 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 or 1 1/2 Square 1 1/8 Square 1 1/8 Square 1 1/8 BLADE O.E.M. DISCSquare 1 1/8 Square

INTERNATIONAL HARVESTER 122 1 132 1 350 1 370 1 470 1 475 1 480 1 485 1 490 1 500 1 501 1 596 1 610 1 630 1 770 1 780 1 JOHN DEERE 105 115 215 225 235 425 1630 100 110 200 & 210 Series 220 230 (Cone HOLE CENTERDisc) 310 1 1 1 1 1 1 1 1 1 1 1 1 1

LIST

Round 1/8 Round 1/2 Round 1/2 Round 1/2 Round 1/2 Round 1/2 Square 1/8 Square 1/8 Square 1/8 Square 1/8 Square 1/8 Square 1/8 Square

O.E.M. DISC BLADE CENTER HOLE LIST

O.E.M. DISC MODEL NO.

JOHN DEERE 525 1630 1635 1640 2620 (Cone Disc) 2621 2650 2651 2700 BWA BWF

23 23

AXLE SIZE

CONT... 1 3/4 Round 1 3/4 Round 1 3/4 Round 1 3/4 Round 1 3/4 Round 1 1 1 2 3/4 Round 3/4 Round 3/4 Round Round

AXLE SIZE

CONT... 1 1 1 1 1 1 1 1 2 1 1 1/4 1/2 1/2 1/2 1/2 1/2 3/4 3/4 1/4 1/4 1/4 Square Round Square Square Square Square Square Square Square Square Square

O.E.M. DISC MODEL NO.

LONG 953 1080 1087-88-89

AXLE SIZE

7/8 Square 1 1/2 Square 1 1/2 Square

O.E.M. DISC MODEL NO.

SUNFLOWER 1441 1541 4211 6010 6030 SCHAFER H-3 H-4 355 555 TAYLOR WAY 200251-200268 200108-200118 200023 200024 200196-200199 2000051-2000068 200284-200291 200310-200315 2001 Series 200011 200013 200035 200036 200037 200048 200049 2000165 2000166 2000167 VASSAR DISC EZY WHITE 250 251 252 253 254 255 256 263 264 265 271 272 273/274 281 1 1 1 1 1 1 1 1 1 1 1 1 1 1

MASSEY FERGUSON

KENT 6112D 6118D 6323D 6327D 7333D 6540D 7550D KEWANEE 800 1000 KRAUSE 1952-1956-1960-1970 1968-1969-1979 1965-1966-1976 1480 Series 1480 Series 1900 Series 1950 Series 2100 Series 2200 Series 2400 Series 2400 Series 2700 Series 3100 Series 3200 Series 1498 & 1499 1465-1470 1580 1740-1769 1912-1915-1918 1901-1904-1907 1922-1925-1928 1921-1924-1927 1959-1963-1973

1 1 1 1 1 1 1

1/2 1/2 1/2 1/2 1/2 1/2 1/2

Round Round Round Round Round Round Round

MF820 MF620 MF520 MF270 MF21 MF25 MF30 MF720 MF39 MF40 MF52 MF72 MF120 MF220 MF233 MF213

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1/4 Square 1/4 Square 1/4 Square 1/2 Square Square Round 1/2 Square 1/2 Square Round 1/2 Square 1/8 Round 1/8 Round 1/8 Square 1/8 Square 1/8 Square 1/8 Square

1 1/8 Square 1 1/8 Square

MILLER Series I Series II NEW HOLLAND OD100 OD200 OD300 TD100 TD200 RHINO 127/167 131 137/187 177 Flex 90 Flex 90B SUNFLOWER 1210 1211 1230 1231 1320 & 1330 1321 1331 1430 & 1440 1431

1 3/4 Round 1 3/4 Round 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3/4 Round 3/4 Round Round 3/4 Round 3/4 Round 1/2 1/2 1/2 1/2 1/8 1/4 1/2 3/4 1/2 3/4 3/4 3/4 3/4 3/4 3/4 Square Square Square Square Square Square Round Round Round Round Round Round Round Round Round

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1

1/2 1/2 1/2 1/2 3/4 1/2 1/2 1/2 1/2 1/2 3/4 1/2 1/2 3/4 1/2 3/4 1/2 3/4 1/2 1/2 1/2 1/2 1/2

Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round

1 1/2 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/2 Square 1 1/2 Square 1 1/8 Square 7/8 Square 7/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 1 1/8 Square 7/8 Square 7/8 Square 7/8 Square 1 1/8 Square

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/2 1/8 1/8 1/2 1/2

Square Square Square Square Square Square Square Square Square Square Square Square Round Square

24 24

COULTERS

TO FIT MOST MAKES OF COULTER UNITS

WAVY

FLUTED COULTERS

DIAMETER & THICKNESS 17" x .157" 17" x .157" 17" x .157" 17" x .157" 17" x .157" 20" x .177" 20" x .177" 20" x .177" 20" x .177" 20" x .177" 20" x .177" 22" x .197" MADE TO FIT Oliver I.H.C. John Deere Ford Massey Ferguson Oliver I.H.C. John Deere Ford Massey Ferguson IH IH

FLUTED

PLAIN

BUBBLE

OSMUNDSON PART NO. F17 157 OL F17 157 IHC F17 157 JD F17 157 FD6 F17 157 MF F20 177 OL F20 177 IHC F20 177 JD F20 177 FD6 F20 177 MF F20 177 IHN F22 197 IHN

CENTER HOLE SIZE (INCHES) 4" Round 31/32" x 1 11/32" 2" Round 2 13/16" Round 3 1/4" Round 4" Round 31/32" x 1 11/32" 2" Round 2 13/16" Round 3 1/4" Round 1 1/2 Round 1 1/2 Round

NUMBER OF BOLT HOLES 4 6 6 6 4 4 6 6 6 4 4 4

BOLT HOLE SIZE 17/32" 11/32" 13/32" 3/8" 15/32" 17/32" 11/32" 13/32" 3/8" 15/32" 17/32" 17/32"

BOLT CIRCLE DIAMETER 5.25" 3.25" 3.50" 4.125' 4.75" 5.25" 3.25" 3.50" 4.125" 4.75" 4.50" 4.50"

WEIGHT PER PIECE 9.90 lbs. 9.90 lbs. 9.90 lbs. 9.90 lbs. 9.90 lbs. 15.6 lbs. 15.6 lbs. 15.6 lbs. 15.6 lbs. 15.6 lbs. 15.6 lbs. 20.4 lbs.

FLAT COULTERS

DIAMETER 20" Coulter Blade 22" Coulter Blade GAUGE 6 6 THICKNESS DECIMAL (.197) (.197) MM 5 5 TO FIT AXLE SIZE 1 1/2 rd 1 1/2 rd BUNDLING 1 1 OSMUNDSON PART # 20CLTR 6GA 112RD 22CLTR 6GA 112RD WGT/BNDL 18.5 lbs. 23.0 lbs.

WAVY COULTERS

Oliver Melroe/Wil-Rich John Deere John Deere John Deere John Deere Metric Allis Chalmers Kinze Great Plains 8 Waves W17157 OL W17157 MLWR W17157 JD 12 Waves WT17157 OL WT17157 MLWR WT17157 JD WT16157JD WT17157 JD WT17157 JDM WT17157 AC WT16157K WT17157 GP

BUBBLE COULTERS

B17175 OL B17157 JD 17" x .157" Bubble Coulter to Fit Oliver and others 17" x .157" Bubble Coulter to Fit John Deere 17" x .157" Bubble Coulter to fit John Deere Metric, Yetter, and others 16" x .157" Bubble Coulter To fit Kinze and others 17" x .157" Bubble Coulter To fit Kinze and others 9.9 lbs 9.9 lbs

W17157 JDM W17157 AC

B17157 JDM B16157 K B17157 K

9.9 lbs 7.3 lbs 9.9 lbs

25 25

COULTERS

H Center Hole: 2 1/2" Bolt Circle: 4" Bolt Holes: (4) 17/32" To Fit: Hiniker and others including Black Machine, Brillion, DMI, Glencoe/Farmland, Haybuster, Landoll, Sukup, United Farm Tools, and Wil-Rich/Noble Blades Available: F20177H P18157H P20177H

IH Center Hole : 31/32" x 1 11/32" Bolt Circle: 3 1/4" Bolt Holes : (6) 11/32"

To Fit: IH older style and others Blades Available: F17157IH F20177IH WT17157IH

IHN Center Hole: 1 1/2" Bolt Circle: 4 1/2" Bolt Holes: (4) 17/32"

To Fit: IH newer style including 720, 800 and others

Blades Available: F20177IHN F22197IHN P22197IHN

JD Center Hole: 2" Bolt Circle: 3 1/2" Bolt Holes: (6) 13/32"

To Fit: John Deere HS and NU bottoms (non-metric) and others including Yetter

Blades Available: B17157JD WS16157JD F17157JD WS17157JD F20177JD WT16157JD W17157JD WT17157JD

JDD Center Hole: 3" Bolt Circle: 4 3/8" Bolt Holes: (4) 13/32"

To Fit: John Deere 750 drill and others

Blades Available: P18197JDD

JDM Center Hole: 2 1/8" Bolt Circle: 4 3/4" Bolt Holes: (5) 33/64"

To Fit: John Deere NU 450 Metric bottoms and others including Yetter

Blades Available: B17157JDM WS16157JDM F20177JDM WS17157JDM F22197JDM WT16157JDM

K

Center Hole: 2" Bolt Circle: 3 3/8" Bolt Holes: (6) 13/32"

To Fit: Kinze and others including Black Machine

Blades Available: B16157K WS16157K B17157K WT16157K

26 26

COULTERS

MLWR Center Hole: 3 11/16" Bolt Circle: 5" Bolt Holes: (4) 17/32" To Fit: Melroe/ Wil-Rich This is a very common agricultural hub used by Acra Plant, Ag Systems, Bigham Bros., Caldwell-Hamby, DMI, Flexi-Coil, Harrell, Landoll, Marliss, Monroe/ Tufline, Noble, Sunflower, Thurston/Blu Jet, Tye, United Farm Tools, Wiese, Wetherell, York Agri Prod., and others Blades Available: B17157MLWR P18177MLWR F17157MLWR P20157MLWR F20157MLWR P20177MLWR F20177MLWR P22197MLWR N16138MLWR P24197MLWR N17157MLWR W17157MLWR N20177MLWR WS17157MLWR P18157MLWR WT17157MLWR

MF Center Hole: 3.172" Bolt Circle: 4 3/4" Bolt Holes: (4) 15/32"

To Fit: Massey Ferguson and others

Blades Available: F17157MF F20177MF

OL Center Hole: 4" Bolt Circle: 5 1/4" Bolt Holes: (4) 17/32"

To Fit: Oliver/White and others including Great Plains, KBH, Marliss, Unverferth, and Yetter

Blades Available: B17157OL W17157OL F17157OL WS17157OL F20177OL WT15157OL P20177OL WT17157OL P18177OL WT16157OL WS16157OL

ORT Center Hole: 2 11/16" Bolt Circle: 4 1/4" Bolt Holes: (4) 13/32"

To Fit: Orthman and others

Blades Available: F20177ORT

R Center Hole: 3 3/4" Bolt Circle: 5" Bolt Holes: (6) 7/16"

To Fit: Rawson and others

Blades Available: W17197R WS17197R

W Center Hole: 2 1/2" Bolt Circle: 4" Bolt Holes: (4) 13/32"

To Fit: Wetherell and others including Alloway, Kongskilde, Lorenz, Noble, P & H, and Tebben

Blades Available: F20177W P18157W

27 27

MOLDBOARD PLOW

THE PRIMARY PURPOSE OF THE MOLDBOARD PLOW IS

TO COMPLETELY TURN THE SOIL TO A DEPTH OF FROM 8 TO 14 INCHES. THIS PLACES THE RESIDUE WHICH WAS ON TOP OF THE SOIL EITHER UNDER THE SOIL OR MIXED WITH THE SOIL. THERE ARE TWO BASIC TYPES OF MOLDBOARD PLOWS: 1) ONE WAY MOLDBOARD PLOW ­ THE ORIGINAL AND STILL MOST POPULAR PLOW. SOIL IS ALWAYS TURNED TO THE RIGHT HAND SIDE. 2) TWO WAY OR ROLLOVER PLOW ­ HAS TWO SETS OF BOTTOMS; 1/2 BEING RIGHT HAND AND THE OTHER 1/2 BEING LEFT HAND. ALL MOLDBOARD PLOWS HAVE THREE PARTS IN COMMON. THE FRAME, THE BEAM, AND THE FROG. THE BEAM ATTACHES TO THE FRAME OF THE PLOW AND THE FROG ATTACHES TO THE BEAM. THE FROG AND ITS ATTACHED COMPONENTS, THE SHARE, SHIN, LANDSIDE AND MOLDBOARD, IS THE PART THAT ENGAGES THE SOIL.

MOLDBOARD PLOW TERMS

FULL CUT SHARE ­ CUTTING EDGE EXTENDS OUTWARDS AT BOTH ENDS OF PLOW SHARE TO CUT FULL WIDTH THAT SHARE WAS DESIGNED FOR. NARROW CUT SHARE ­ BACK, OR REAR CUTTING EDGE OF PLOW SHARE CUT OFF "SHORTER" TO CUT LESS THAN FULL CUT PLOW WAS DESIGNED FOR. SHIN ­ A REPLACEABLE EXTENSION FOR THE FRONT OF THE MOLDBOARD WHERE THE MOST WEAR IS ENCOUNTERED. LANDSIDE ­ HEAVY STEEL OR CAST IRON PLATE BOLTED TO THE FROG ASSEMBLY TO COUNTERACT THE NATURAL TENDENCY OF THE PLOW TO CONSTANTLY RUN INTO THE LAND. WEAR PAD ­ A PIECE OF STEEL BOLTED TO THE LANDSIDE WEAR FACE THAT CAN BE REVERSED AND THEN REPLACED AT LESS COST THAN THE ENTIRE LANDSIDE ASSEMBLY.

MoldBoard

Shin Frog

Wear Pad Share

HOW TO FIND THE CORRECT PLOW SHARE:

1. ASK WHAT MANUFACTURER MADE THE PLOW:

(COLOR)

2. THE LENGTH OF PLOW SHARE OR IF THEY CALL IT A 14-16 OR 18.

INCHES CUT

THIS LENGTH IN

3. HOW MANY HOLES DOES THE PLOW SHARE HAVE?

28 28

RIB SHARES

MODEL Ford

PACKAGED THREE PER CARTON ­ BOLTS NOT INCLUDED

OEM OSMUNDSON PART # PART # 105203A (OF 12 Rib) (OF 14 Rib) 7100369 (OF 14-4 Rib) 7100369RS(OF 16 Rib) 7100370 (OF 16-4 Rib) 7100984 (OF 18-5 Rib) 463244 (OI 14 Rib) 463236 463245 *463237 Massey Ferguson *463238 660005 475161 660208 *475167 *475823MI (OI 14-4 Rib) (OI 16 Rib) (OI 16-4 Rib) (OI 18-4 Rib) (MF 14 Rib) (MF 14-4 Rib) (MF 16 Rib) (MF 16-4 Rib) (MF 18-4 Rib)

IHC Super Chief

BOLTS USED Three 7/16"x 1 1/4" clipped head Three 7/16"x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Five 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head Four 1/2" x 1 3/8" clipped head Three 7/16" x 1 1/4" clipped head Four 1/2" x 1 3/8" clipped head Four 1/2" x 1 3/8" clipped head

WGT/CTN 42 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 42 42 47 47 52 lbs. lbs. lbs. lbs. lbs. lbs.

MODEL Allis Chalmers #387 Series Melroe 992 Bottom Allis Chalmers 390 Melroe/Star Case

John Deere

Oliver Minneapolis-Moline White Farm Wil-Rich

*Available in Left Hand

OSMUNDSON PART # (AC 387-4 Rib) (AC 387-18 Rib) (OM 16-5 Rib) (OM 18-5 Rib) (MML 14-4 Rib) (MML 16-4 Rib) (MML 18-4 Rib) (OC 14 Rib) T39134 (OC 14-4 Rib) EE14F (OC 16 Rib) T39135 (OC 16-4 Rib) EE16F RCA8R (OC 18-5 Rib) BC452 (OD 14 Rib) A10225 (OD 14-4 Rib) BC472A (OD 16 Rib) *A10227 (OD 16-4 Rib) *A14243 (OD-NU-18-5 Rib) *A40408 A30951 (OD Metric Rib) (OO 14 Rib) (OD Metric Rib) (OO 14-4 Rib) RB14R (OO 16-4 Rib) (OO 18-5 Rib) *RCA8R 215804 (OWR 16-4 Rib) 14255 (OWR 18-4 Rib)

OEM PART # 347750 573307 6528666 6528667 6526827 6526832 6526829

BOLTS USED One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Two 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Three 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Two 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Three 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head One 1/2" x 1 x 40 mm clipped x 1 1/4" clipped head Three 16 mm 3/8" & Two 7/16" head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Four 1/2" x 1 3/8" clipped head Four 1/2" x 1 3/8" clipped head

WT/CTN 48 lbs. 57 lbs. 59 lbs. 60 lbs. 42 lbs. 47 lbs. 52 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 42 lbs. 52 lbs. 42 lbs. 47 lbs. 52 lbs. 47 lbs. 52 lbs.

HARD SURFACE RIB SHARES BREAKER BAR ADDED FOR A LONGER LIFE AND TO PREVENT WASHING. HARD FACED TO GIVE THREE TO FIVE TIMES LONGER WEAR IN THE FIELD. DESIGNED TO LESSEN DOWN TIME FOR MAINTENANCE SO MORE TIME CAN BE SPENT PLOWING. TO ORDER HARD FACED, ADD HF TO THE PART NUMBER.

ROCK SHARES

MODEL Ford OEM OSMUNDSON PART # PART # (OF 14-RS) 7100369RS (OF 14-4 RS) (OF 16 RS) *7100370RS (OF 16-4 RS) *7100984RS (OF 18-5 RS) 463244RS 463236RS 463245RS *463237RS (OI 14 RS) (OI 14-4 RS) (OI 16 RS) (OI 16-4 RS) BOLTS USED Three 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Five 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head Four 1/2" x 1 3/8" clipped head Three 7/16" x 1 1/4" clipped head Four 1/2" x 1 3/8" clipped head Four 1/2" x 1 3/8" clipped head

29 29

WGT/CTN 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 42 42 47 47 52 lbs. lbs. lbs. lbs. lbs. lbs.

IHC Super Chief

Massey Ferguson

*463238RS (OI 18-4 RS) 660005RS (MF 14 RS) 475161RS (MF 14-4 RS) 660208RS (MF 16 RS) *475167RS (MF 16-4 RS) *475823MIRS (MF 18-4 RS)

MODEL Allis Chalmers #387 Series Allis-Chalmers Melroe 992 Bottom Allis Chalmers 390 Melroe

OEM PART # 347750RS 573307RS 325614RS 344870RS 6528666RS 6528667RS 6526827 6526832 6526829 EE14F-RS EE16F-RS

Case

John Deere

Oliver Minneapolis-Moline White Farm

Wil-Rich

*Available in Left Hand

RCA8R-RS BC452RS A10225RS BC472ARS *A10227RS *A14243RS *A42408 A30951 RCA4R (OO 14 RS) (OO 14-4 RS) *RCA6R (OO 16 RS) (OO 16-4 RS) *RCA8R (ON 18-5 RS) 215804 (OWR 16-4 RS) 14255 (OWR 18-4 RS)

OSMUNDSON PART # (AC 387-4 RS) (AC 387-18 RS) (OA 14-4 RS) (AC 16-4 RS) (OM 16-5 RS) (OM 18-5 RS) (MML 14-4 RS) (MML 16-4 RS) (MML 18-4 RS) (OC 14 RS) (OC 14-4 RS) (OC 16 RS) (OC 16-4 RS) (OC 18-5 RS) (OD 14 RS) (OD 14-4 RS) (OD 16 RS) (OD 16-4 RS) (OD-NU-18-RS) (OD Metric RS) (OD Metric RS)

BOLTS USED One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Four 3/8" x 1 3/16" clipped head Four 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head Four 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Two 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Three 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Two 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Three 3/8" x 1 3/16" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Three 16mm x 40mm clipped head One 1/2" x 1 3/8" & Two 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Two 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Three 7/16" x 1 1/4" clipped head One 1/2" x 1 3/8" & Four 7/16" x 1 1/4" clipped head Four 1/2" x 1 3/8" clipped head Four 1/2" x 1 3/8" clipped head

WT/CTN 47 lbs. 52 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 42 lbs. 47 lbs. 52 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 42 lbs. 42 lbs. 47 lbs. 47 lbs. 52 lbs. 57 lbs. 42 42 47 47 52 47 52 lbs. lbs. lbs. lbs. lbs. lbs. lbs.

THE BODY OF THE ROCK SHARE IS 3/8" THICK. THE NOSE OF THE ROCK SHARE IS THICKENED THROUGH OUR HOT FORGED UPSET OPERATION. THE UPSET NOSE GIVES LONGER LIFE IN ALL TYPES OF SOIL AND WILL RESIST BREAKING WHEN USED IN ROCKY SOIL. THIS SHARE IS AVAILABLE WITH 3, 4, OR 5 HOLES TO FIT ALL STANDARD PLOWS WITH THE LIKE NUMBER OF HOLES.

PLOW SHARE INTERCHANGE INFORMATION

NOTE: THE ITEMS LISTED BELOW ARE A REASONABLE INTERCHANGE SUBSTITUTE. THIS DOES NOT MEAN AN ALWAYS PERFECT FIT, BUT SATISFACTORY.

Allis-Chalmers Shares "OA" Series Shares (Will not Interchange with #375, #387, #390 or #392 plows): OA14-4 will interchange with a 3-hole Use AC Shin OA16-5 (5-hole) interchanges with 3 and 4-hole ­ Use AC Shin Other "OA" Interchanges 1. Can use OA Series 14-inch on 16-inch plow. Hole punchings are the same. 2. OA16-5 Short ­ Not Available ­ Use OA14-4 Rock Share. "AC" 375 Series Share AC14-4 For the AC#375 Plow Bottom Only AC16-4 All models since 63 AC14-4 & AC16-4 will interchange Use AC375 Shin Massey Ferguson cont... 3. MF14-4 and MF16-4 will interchange 4. For MF16 Short ­ Use MF14 5. For MF16-4 Short ­ Use MF14-4 International Shares (IHC) OI Interchanges 1. OI 14 will interchange with MF14 Use IH Shin 2. OI 14-4 and OI 16-4 will interchange 3. OI 14 and OI 16 will interchange 4. For OI 16-4 Short ­ Use OI 14-4 5. For OI 16 Short ­ Use OI 14 6. OI 18-4 Rock Share ­ Now available Use IH Shin for the #700 Series Plow 7. OI 20-4 Rock Share ­ Use OI 18-4 Rock Share John Deere Shares OD14 and OD14-4 OD16 and OD16-4 Use D Shin 14 Use D Shin 16

30 30

"AC" 387 Series Share AC387-4RS For the #387 Plow Use AC387 Shin Bottom only. AC387-18RS Use AC387 Shin AC390-16-5RS Use OM16-5RS Use O Shin W (Melroe in line) AC390-18-5RS Use OM 18-5RS Use O Shin W (Melroe) AC392 16-18 5-hole interchange Use Melroe 992 drop front hole. Will interchange with Melroe 987 Case Shares 14-inch and 16-inch bottoms Use C Shin

"NU" Series Shares 16-inch Bottom Use OD16-4 Rib or Rock Share 18-inch Bottom 20-inch Bottom

Use D-NU Shin (Fits 16,18,&20") Use OD NU18-5 Rock Share Use OD NU18-5 Rock Share

Oliver Shares "OO" Interchanges 1. OO and MM will interchange ­ Both for MelroeReiten 14-inch and 16-inch 2. All 4-holes will fit 3-holes 3. MM 14-inch and 16-inch low bottoms use O Shin W "ON" Series Shares ON 18-5 Rock Share For Oliver #919 Use O Shin Speedex High 919 Speed Plow Bottom

Case Share Interchanges 1. 4-hole will fit 3-hole 2. 14-inch will fit 16-inch plow 3. For OC16-4 Short ­ Use OC14-4 Use O Shin W 4. OC18-5 will interchange with ON18-5: O Shin W 5. DMI 16 & 18 ­ 4-hole Use O Shin W Ford Shares 14-inch and 16-inch bottoms Use F Shin

"ON" Interchange 1. ON 16-5 will interchange with ON18-5 2. ON 18-5 will interchange with OC18-5 Minneapolis-Moline Shares 1. All MM 14-4 and MM 16-4 will interchange 2. All MM 14-4 and MM 16-4 will interchange with the National Plow 3. MM and OO will interchange on older models ­ both interchange with the Melroe-Reiten 14 and 16 inch David Brown Shares 1. Use the MM Share Speedco Shares OF Rib Share Melroe 992 Series Shares (Only) 1. OM 16-5 for 992 Series 16" 2. OM 18-5 for 992 Series 18" Use F Shin Use O Shin W Use O Shin W

Ford Share Interchanges 1. 4-hole will fit 3-hole 2. 14-inch will fit 16-inch plow 3. For OF 16-4 Short ­ Use OF14-4 4. For 18" Bottom ­ Use OF18-5RS 5. Ford 150, 151, 152 ­ Use Oliver/White 16" or 18" Rock Share Massey-Ferguson Shares "MF" Share Interchanges for HDN bottom) 1. MF14 interchanges with OI14 Use MF Shin (3-hole only) 1965 models and later 2. MF14 and MF16 will interchange

31 31

PLOW SHARE CROSS REFERENCE SHEET

OUR SHARES WILL FIT THE FOLLOWING ORIGINAL EQUIPMENT MANUFACTURERS PART NUMBER AND OTHERS IN EITHER THE RIB OR ROCK PATTERNS.

Original Equipment Manufacturer's Part Nos. (O.E.M.) 344182 325550 326080 344868 326062 244188 344268 326826 326086 344190 Original Equipment Manufacturer's Part Nos. (O.E.M.) A10026A A10321A A14025 A10028A A10228A A10328A

OSM NO.

OSM NO.

For Allis-Chalmers Plows OA14-4 325614 338476 326082 344865 326074 344186 344184 344867 OA16-5 325552 326084 344866 344192

#375 Series AC14-4 344869 341395 341394 AC16-4 344870 341396 347007 #387 Series AC387-4 347750 347751 347749 AC387-18 573307 For Case Plows OC14 E14 EE14K OC14-4 E14A EE14KA OC16 E16 OC16-4 E16A OC18-5 RD18 For Ford Plows OF12 105204 OF14 105206 201192 OF16 105208 201194 OF14-4 201573 OF16-4 201575 OF18-5 201589 EE14 ESH14K ESH14K EESH14 EE16 EE16A RCA8R EE14H EE14A EE14A EE14FRS EE16H EE16AH EESL14 EE14AH EE14AH EESL16 EESH16

For John Deere Plows (continued) OD14-4 A10021A A10022A A10025A A10221A A10222A A10226A A10322A A10325A A10327A CY104A OD16-4 A10023A A10024A A10027A A10223A A10224A A10227A A10323A A10324A A10327A A14027 CY105A For Minneapolis-Moline Plows MM14-4 20P1389 20P1391 20P2369 MM16-4 20P1390 20P1392 20P2370 For Oliver Plows OO12 RFB2S OO14 RFB4R OO16 R16R OO14-4 RR14R OO16-4 RR16R ON18-5 RCA8R R12S R14S RFB6R RR14S RR16S R12R R14R R16S

20R46 20R47 RFB4R RFB6S

105203 104420 105205 104421 105207 104422 201579 201585 201581 201587 201596 A10001A A10005A CY102A A10004A A10008A BC453A

105325 105326 105327 201586 201588

For Massey-Ferguson Plows MF14 661677M91 661679M91 47513OM1 475134M1 660014M91 MF16 661680M91 661682M91 661688M91 475137M1 660874M91 MF14-4 475161M1 475162M1 MF16-4 475167M1 475160M1 MF18-4 475823M1 For International Plows OI14 52383R51 524173R31 463248R1 526773R3 OI16 523836R51 524174R31 463246R1 526774R3 OI14-4 462222R11 462226R11 4632401 463252R1 OI16-4 462223R11 462227R11 463241R1 481960R1 481964R1 OI18-4RS 463238RS 463254R1

660005M1 660873M91 661095M91 661687M91 475135M1 660208M1 661116M91 660210M91

For John Deere Plows OD14 BC452 BC454 A10002A A10102A A10006A A10106A OD16 A10003A A10103A A10007A A10107A BC472A BC474A CY103A

463228R1 463229R1 463232R2 470955R1 463433R1 463253R1 492081R1 481961R1

463244R1 463245R1 463236R1 481959R1 463237R1 470957R1 481965R1

A10101A A10105A A10104A A10108A BC455A

32 32

REFER TO PAGE 30 FOR PLOW SHARE INTERCHANGE INFORMATION.

33 33

REFER TO PAGE 30 FOR PLOW SHARE INTERCHANGE INFORMATION.

34 34

SHINS

MOLDBOARD SHINS ­ HEAT TREATED ­ SIX PER CARTON ­ CLIPPED HEAD BOLTS REQUIRED

Osmundson Part # OEM Part # Bottom Size & Thickness of Shin

Plow Bottom Series To Fit Allis-Chalmers

Wgt./Ctn

AC 375 AC 387

340971 347649

375 387

14-16-18 x 5/16 14-16-18 x 5/16

24 lbs. 24 lbs.

To Fit Case

C Shin C Shin T-60002 T-60003 EXB14-EXC14 EXB16-EXC16 14 x 5/16 16 X 5/16 24 lbs. 24 lbs.

To Fit John Deere

D Shin 14 D Shin 14 LH D Shin 16 D Shin 16 LH D NU Shin D NU Shin LH D Shin Metric A14700 A14701 A14702 A14703 A15594 A15606 A30129 HS314-324-354-434-444-534 & 544 HS314-324-354-434-444-534 & 544 HS316-326-356-436-446-536-546 & SD546 HS316-326-356-436-446-536-546 & SD546 NU1036-46-48 NU 1036-46-48 LH NU400-NU450 "Metric" 14 x 5/16 14 x 5/16 16 x 5/16 16 x 5/16 NU 16" ­ 18" NU 16" ­ 18" LH 18l x 5/16 22 lbs. 22 lbs. 24 lbs. 27 lbs. 26 lbs. 26 lbs. 25.5 lbs.

To Fit Ford

F Shin F Shin LH 201344 201345 General Purpose, Clay, Sod, & Stubble General Purpose, Clay, Sod, & Stubble Fits All Models Fits All Models 22 lbs. 22 lbs.

To Fit I.H.C. Super Chief

IH Shin IH Shin LH 522325R 488266R 55075C 464595 Super Chief Super Chief 14-16-18 x 5/16 14-16-18 x 5/16 24 lbs. 24 lbs.

To Fit Massey Ferguson (N-Bottom)

MF Shin MF Shin LH 660008M1 661584 "N" & "N" Heavy Duty "N" & "N" Heavy Duty 12-14-16-18 x 5/16 12-14-16-18 x 5/16 24 lbs. 24 lbs.

To Fit Melroe

O Shin W O Shin W LH MEL Shin 6522182 652091 General Purpose (Oliver Style Bottom) General Purpose (Oliver Style Bottom) 987 Series (Allis Chalmers 387 Bottom) 14-16-18 x 5/16 14-16-18 x 5/16 16-18 x 5/16 21 lbs. 21 lbs. 24 lbs.

To Fit Oliver White/DMI

O Shin W O Shin 16 LH O919 Shin EP7490C 217404BS 219279B 619-719-519-419 & 219 619-719-519-419 & 219 919 12-14-16-18 x 5/16 12-14-16-18 x 5/16 14-16-18 21.5 lbs. 21.5 lbs. 24 lbs.

35 35

MOLDBOARDS

HEAT

TREATED FOR LONGER WEAR. HEATTREATING THE MOLDBOARD LEAVES THE WEAR THUS ENABLING THESE FACE HARDER, MOLDBOARDS TO "SCOUR" IN MOST SOIL CONDITIONS.

Osmundson Part #

AC347966 Case EX16

OEM #

To Fit Series Bottom

Size

14" ­ 16" 16"

Wgt.

24 lbs. 27.07 lbs.

AC

347966 387

CASE

T600001/T21451 EXB-EXC ­ 16"

Note: All Case plow series 400, 500, 7000, & 8000 will require the use of Oliver/White Farm Equipment Moldboards.

JOHN DEERE

JD HS314 JD HS316 JD HS546 (LH) NU-1036 (JD-14885) NU-1046 LH NU-1048 (JD-15673) NU-1048 LH 32209 F 104404 F 104409 F104412 A20700/BA1022A A20702/BA1024A A20703 A15596 A15607 A17431 A17432 32209 104404 104409/201277/251440 104412/201278/251442 HS314,324,HS354,434,444 HS316,326,HS356,436,446 HS316-326,HS356-436,446 NU-1036-1046 NU-1036-1046 (LEFT) NU-1048 NU-1048 (LEFT) METRIC NU 450 14" 16" 16" 16" 16" 18" 18" 14" 12" 14" 16" 24.49 lbs. 29.20 lbs. 24 lbs. 33 lbs. 33 lbs. 37 lbs. 37 lbs. 39 lbs. 23.5 lbs. 26.70 lbs. 29.94 lbs.

FORD

General Purpose General Purpose General Purpose

Note: All Ford plow series 150, 151 & will require the use of Oliver/White Farm Equipment Moldboards.

IHC SUPER CHIEF

IHC 462313 IHC 462314 IHC 464603 (LH) MF 660022 MF 660204 MF 661651 (LH) R419-R619-14 R419-R619-16 R619-18 462313 R 462314 R, 488265 R, 58996 C 132000 C-1 464603 R 660022M-91 660204-M1 Super Chief (High Speed) Super Chief (High Speed) Super Chief (High Speed) "N" & "N" Heavy Duty "N" & "N" Heavy Duty "N" & "N" Heavy Duty R419-R619 R419-R619 R619 14" 16"- 18"-20" 18" 14" 16"-18" 16"-18" 14" 16" 18" 28 lbs. 30 lbs. 33 lbs. 27 lbs. 30 lbs. 30 lbs. 26 lbs. 30 lbs. 35 lbs.

MASSEY-FERGUSON WHITE FARM / OLIVER / DMI

R419-14 R419-16 (DMI) R619-18

36 36

LANDSIDES AND WEAR PADS

Osmundson Part #

AC 868 W AC 819 W

OEM #

349819

Bottom Series Allis-Chalmers

386-370-387-392 386-370-387-392

Position

Wear Pad for 819W All (Offset)

Weight/ Ctn

20 lbs. 44 lbs. 50 lbs.

Case

C7000W JD JD JD JD JD JD JD 979 300 862 493 494 262 263 W W W W W W W T51968 BA10979 AA15262 A27862 AA16493 AA16494 AA15262 AA15263 107980/251448 107981/251449 108427 108429 100601 59058 59058 59057 475153M1 475937M1 661580M1 661581M1 218270B 1012835 Case 7000 Series 18" General Purpose Blanchat Plow Offset Rear Heel Wear Pad Inner Plate Inner Plate (LH) Wear Pad Wear Pad (LH) Front Rear Front LH Rear LH Rear All bottoms Wear Pad LH Inner Plate LH All Bottoms Wear Pad Inner Plate Inner Plate Wear Pad Front LH Rear LH Offset Old Style Offset New Style

John Deere

HS Series (All) HS314-HS316 Metric HS or NU Series HS or NU Series HS or NU Series HS or NU Series 34 20 34 27 27 23 24 35 59 35 59 82 22 45 22 45 60 22 54 81 lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs.

Ford

F 980 W F 981 W F 980 WLH F981 WLH F 601 W IHC 058UV LH IHC 05957 LH IHC 058UV IHC 59057 MF 475 W IH 058UV MF 580 LH IH 058UV LH O 270 W O 270 W-A General Purpose (After 1958 General Purpose (After 1958) General Purpose General Purpose General Purpose (Prior to 1958)

IHC Super Chief

Super Super Super Super Chief Chief Chief Chief

Massey Ferguson

"N" Series-Heavy duty & high speed "N" Series-Heavy duty & high speed "N" Series "N" Series

White Farm/Oliver

419-425-619-625 419-425-619-625 56 lbs. 57 lbs.

*Note 058UV may be used on newer White plows with 270 W-A offset landside.

LANDSIDE REFERENCE

TO FIT ALLIS CHALMERS

37 37

854W Allis Chalmers (1) 9/16" x 3" Machine Bolt (1) 9/16" x 3 1/4" #3 PH Bolt

422W Allis Chalmers (2) 1/2" x 1 1/2" CH Bolts

819W Allis Chalmers (2) 9/16" x 3" #3 PH Bolt Landside is offset 1/2"

The 819W-868W back plate/wear pad assembly can be used to replace the older 819W on 387, 390 and 392 series plows

868W Allis Chalmers (2) 2 1/2" x 1 1/2" CH Bolts

TO FIT CASE

590W Case (1) 3/8" x 1 1/4" CH, (1) 1/2" x 3 CH (1) 5/8" x 2 1/2" #3 PH Bolt

727W Case (1) 3/8" x 1 1/4" CH, (1) 1/2" x 3" CH (1) 5/8" x 2 1/2" #3 PH Bolt

7000W (1) 3/8" x 1 1/2" #3 PH Bolt (1) 5/8" x 2 1/2" #3 PH Bolt (1) 1/2" x 3" #3 PH Bolt (1) 7/16" x 1 3/4" #3 PH Bolt

38 38

TO FIT JOHN DEERE

146W John Deere (2) 1/2" x 3" RHCH, (1) 7/16" x 2" RHCH

979W John Deere (2) 1/2" x 3" RHCH Use with 300 W heel

300W John Deere Heel (1) 1/2" x 1 1/2" RHCH, (1) 7/16" x 2" RHCH

A47716W John Deere (1) 5/8" x 2" #3 PH (1) 5/8" x 3" #3 PH

862W John Deere Metric Wear Pad OEM# A27862 (1) 5/8" x 2" #3 PH (1) 5/8" x 3" #3 PH

The 493-262 back plate/wear pad assembly can be used to replace the older 146W front, 979 rear landside. Use the 493/262 for front & rear both.

493W John Deere (2) 1/2" x 2 1/2" #3 PH Use with 262W

262W John Deere (1) 7/16" x 1 1/2" RHCH, (1) 7/16" x 2" RHCH Use with 493W

39 39

TO FIT DMI

4256W Wear Pad (1) 7/16" x 1 3/4" PH, (1) 7/16" x 2 1/2" PH

4253W Inner Plate (A) 5/8" x 3" PH, (B) 7/16" x 1 1/2" CH

TO FIT FORD

601W Ford (1) 7/16" x 1 1/2" RHCH, (1) 7/16" x 2" RHCH (1) 5/8" x 3" #3 PH, (2) 5/8" x 2 1/2" #3 PH

981W Ford (1) 7/16" x 2" RHCH (1) 5/8" x 3" #3 PH, (2) 5/8" x 2 1/2" #3 PH

980W Ford (1) 7/16" x 2" RHCH, (1) 5/8" x 3" #3

600 W Ford (1) 7/16" x 1 1/2" RHCH, (1) 7/16" x 2" RHCH (1) 5/8" x 3" #3 PH

40 40

TO FIT I.H.

The 59057/058UV back plate/wear pad assembly can be used to replace the older 342 front, 343 rear landside by using the 59057/058UV for front and rear both. 058UV (1) 7/16" x 1 1/2" CH, (1) 7/16" x 2" CH Use with 59057 Inner Plate 343W I.H. (2) 7/16" x 1 1/2" CH

661 W I.H. (1) 7/16" x 1 1/2" CH, (1) 7/16" x 2" CH Use on front or rear

59057 I.H. A - 7/16" x 1 1/2" CH (1), B - 1 1/4" Hole (1) C ­ 12" Hole (2) Use with 058 UV Wear Pad

342W I.H. (2) 7/16" x 1 1/2" CH

184W I.H. (1) 7/16" x 1 1/2" CH, (1) 7/16" x 2" CH

41 41

TO FIT M.F.

002W M.F. (1) 7/16" x 1 1/2" CH, (1) 7/16" x 2" CH (1) 5/8" x 3" PH

475 M.F. A ­ 5/8" x 3" PH, B ­ 7/16" x 2" PH C ­ 7/16" x 2 1/2" PH, D ­ 1/2" Hole Use with 058UV Wear Pad in combination to replace the one piece cast OEM Part No.'s 475153M1 & 475183M1

003W M.F. (1) 7/16" x 1 1/2", (1) 7/16" x 2" CH (1) 5/8" x 3", (2) 5/8" x 2 1/2" #3 PH

The 475W/058 UV back plate/wear pad assembly may be used to replace the older 002W front and 003W rear landside. Use the 475/058 UV for front and rear both.

058 UV (2) 7/16" x 1 1/2" CH Use with 475W Inner Plate

42 42

TO FIT MELROE

819W Allis Chalmers (2) 5/8" x 3" #3 PH Bolt Landside in NOW flat, not offset.

868 Allis Chalmers (2) 1/2" x 1 1/2" CH bolts (For 819W Landside Plate)

6000W Melroe Inner Plate (1) 7/16" x 1 3/4" PH Bolt (2) 1/2" x 3 1/2" PH Bolt

847 Melroe (General Purpose) (1) 7/16" x 2" PH (1) 7/16" x 2 1/2" PH

TO FIT MINNEAPOLIS MOLINE

638W

43 43

TO FIT OLIVER/WHITE

270W Oliver (offset) (2) 7/16" x 1 1/2" RHCH, (1) 7/16" x 2" RHCH (1) 5/8" x 3" #3 PH, (1) 5/8" Hex Jam Nut 270W-A Oliver (offset) Holes A & B are punched to accommodate a 5/8" #3 PH bolt 5/8" x 3", (1) 5/8" x 2 1/2" & (1) 5/8" 2" #3 PH bolts (1) 7/16" x 2" RHCH & (1) 5/8" Jam Nut

379 Innerplate (1) 5/8" x 3" PH (1) 1/2" x 2 1/2" PH (1) 1/2" x 1 3/4" PH

919 Wear Pad (2) 5/8" x 2 1/2" PH

TO FIT WIL-RICH

4256W Wear Pad (1) 7/16" x 1 3/4" PH (1) 7/16" x 2 1/2" PH

4253W Inner Plate (A) 5/8" x 3" PH, (B) 7/16" x 1 1/2" CH

20036W Wil-Rich (1) 5/8" x 3" PH Bolt

SUB SOILERS (V-RIPPER)

44 44

Part # Booted Point 41B2512BT 41B2510B 41B2511B2 41B1511BR 41B2509BH 41B2508IH 41B2512JD 41B2008FC 41B2512JD 41B1511K1 41B2511K2 41B2008KA 41B2512L 41B2512MW/SF 41B2012PK 41B2510PT 41B2010WA 41B2010WA2 41B2512WT 41B2013Y

OEM #

Description

Roll Pin

Wgt.

93397 03-1K505

AA21507

2500-6015

Brent CPC 2000 w/boot, 1" x 2 1/2" x 12" Brillion w/boot, 1" x 2 1/2" x 10" Brillion Land Comm. w/boot, 1" x 2 1/2" x 11" Brown w/boot, 1" x 1 1/2" x 11" Bush Hog w/boot, 1" x 2 1/2" x 9/12" Case/IH w/boot, 1" x 2 1/2" x 9 1/2" Deere w/boot, 1" x 2 1/2" x 12" Forrest City w/boot, 1" x 2" x 8" Glencoe w/boot, 1" x 2 1/2 x 12" Kelley w/boot, 1" x 1 3.4" x 11" Kelley w/boot, 1" x 2 1/2" x 11" Kewanee w/boot, 1" x 2" x 8" Lely w/boot, 1" x 2 1/2" x 12" M & W, Sunflower, 1" x 2 1/2" x 12" Paulk w/boot, 1" x 2" x 12" Pittsburgh w/boot, 1" x 2 1/2" x 10" W & A w/boot, 1" x 2" x 10" W & A w/boot, 1" x 2" x 10" Watts w/boot, 1" x 2 1/2" x 12" Yetter w/boot, 1" x 2" x 13" Formed Ear Point

9/16" x 2"

1/2" x 2" 3/8" x 2" 3/8" x 2"

3/8" x 2" 5/16" x 2" 5/16" x 2"

9.0 lbs. 8.0 lbs. 8.5 lbs. 5.6 lbs. 7.0 lbs. 8.0 lbs. 9.0 lbs 6.5 lbs. 9.0 lbs. 5.0 lbs. 8.5 lbs. 6.0 lbs. 9.0 lbs. 9.0 lbs. 7.5 lbs. 8.0 lbs. 6.5 lbs. 6.5 lbs. 9.5 lbs. 8 lbs.

7709545IH 77MW11000

954530R2

IHC, 1/2" x 2" x 8" to fit #10 shank M & W, 3/4" x 2 1/2" x 12" Bolt On Point Bolt Size 5/8" hex 1/2" p.h. 1/2" p.h 5/8" hex 5/8" hex 1/2" p.h 1/2" p.h 5/8" hex 5/8" hex 5/8" hex 5/8" hex

2.2 lbs. 5.6 lbs.

412514BJ 412013JD 412013JD 412512JD 412013T 412013JD 412512L 412512JD 48010014 48010014 48010014

A17994 A17994 Q30681 010006 A17994 010014 010014 010014

Blu-Jet, 1" x 2 1/2" x 13 1/2" Case. 1" x 2" x 13" Deere, 1" x2" x 13" Deere, 1" x 2 1/2 x 12" Taylor/Pittsburgh, 1" x 2" x 13" Landoll, 1" x 2" x 13" Lilliston, 1" x 2 1/2" x 12" Kelley, 1" x 2 1/2" x 12" Brillion Landoll, 3/4" x 2 1/4" x 17 1/4" Tebben

9.5 lbs 7.0 lbs 7.0 lbs 8.5 lbs 7.0 lbs 7.0 lbs 8.5 lbs 8.5 lbs 10 lbs 10 lbs 10 lbs

45 45

SHIPPING

All shipments from Osmundson Mfg. Co. are F.O.B. Perry, Iowa. When placing an order please inform us of the freight lines you wish to use or if you want to use United Parcel Service (UPS) which has a variety of shipping options to meet your needs.

WARRANTY

Plow Shares 100% replacement on rock & rib shares up to 1/2" wear on the cutting edge. No warranty left after 1/2" wear on cutting edge. 100% replacement on edge breakage or bending up to 1" diameter wear. No warranty left after 1" diameter wear. No guarantee on center hole breakage. Warranty covers all other tillage tools against breakage under normal use up to 1/2" wear on any cutting edge. ANY ALTERATION OF OSMUNDSON PRODUCTS WILL VOID WARRANTY.

Disc Blades

Other

Parts listed in this catalog are replacement parts, made to operate satisfactorily on implements specified, but are not offered as products of the original equipment manufacturer or its affiliates. Part numbers used for purposes of showing interchange and replacement.

RETURNS OF MERCHANDISE

Any merchandise purchased from Osmundson Mfg. Co. that is in saleable condition and shown in the Osmundson Mfg. Co. current catalog will be accepted for return. The freight on this merchandise must be prepaid. The returned merchandise will be subject to a 15% restocking charge. All returns must have the expressed approval of Osmundson Mfg. Co. prior to shipment.

SHIPMENT DAMAGES

Under the terms of sales, when the shipment is released to the carrier it becomes the property of the purchaser. Damage to shipments beyond the F.O.B. point is the responsibility of the carrier, and any claim for damage is to be initiated by the purchaser with the carrier.

OBVIOUS CONTAINER DAMAGE

Shipments with damaged container(s) are to be brought to the attention of the carrier at the time of delivery.

CONCEALED DAMAGE

Shipments should be opened promptly upon receipt and thoroughly inspected. Concealed damages should be reported to the local agent of the delivering carrier immediately. The container(s) and contents of damaged shipments must be made available to the carrier for inspection. Damaged shipments are not to be returned without prior authorization. Please write or call the factory to obtain authorization (RMA) number. 1-800-824-6661

SHIPMENT SHORTAGES

Each shipment should be examined promptly by the purchaser upon receipt, all claims for losses or shortages must be made to Osmundson Mfg. Co. WITHIN SEVEN (7) DAYS OF RECEIPT OF SHIPMENT.

46 46

CUSTOMER SERVICE- 800-824-6661 OR FAX-515-465-2126 EMAIL AT [email protected] P.O. BOX 158 PERRY, IOWA 50220

WWW.OSMUNDSON.COM

Information

Microsoft Word - New Parts Catalog 2008.doc

46 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

619082


You might also be interested in

BETA
HP Pavilion Data Sheet
Microsoft Word - New Parts Catalog 2008.doc