Read 2008electronicversionORD%205712.pdf text version

Parker O-Ring Material Offering Guide

ORD 5712

Failure, improper selection or improper use of the products and/or systems described herein or related items can cause death, personal injury or property damage. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provides product and/or system options for further investigation by users having technical expertise. It is important concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through his or her own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled "Offer of Sale"

Copyright © 2008, Parker Hannifin Corporation, Cleveland, OH. All rights reserved.

ORD 5712 O-Ring Material Offering Guide

O-Ring Material Offering Guide

Table of Contents

Introduction Material Offering Engineering Tools Gland Designs Sizing Charts 2 5 27 29 39

Parker Hannifin Corporation · O-Ring Division

1

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Operations

Engineers in every industry - from automotive to fluid power to semiconductor processing - choose O-rings made by Parker Hannifin to keep their equipment running safely and reliably. That's because Parker's O-Ring Division, a developer, manufacturer and supplier of precision-engineered O-rings for over 50 years, offers a unique combination of experience, innovation and support.

Quality Assurance

In the O-Ring Division's world-class facilities, skilled Parker technicians manufacture O-rings to exacting standards, closely monitoring each step of the process through a Controlled Batch Identification (CBI) program. From in-house mixing and tooling operations to the final non-contact inspection process, state-of-the art technology is employed to provide unparalleled material consistency and dimensional control. Quality registrations (AS 9100, ISO 9001, TS 16949 and VDA 6.1) are maintained to ensure superior product performance and process repeatability.

Research and Development

In its on-site research labs, Parker develops new O-ring material formulations and compounds to meet customers' needs. These materials are subjected to a broad range of mechanical, physical and environmental conditions, and their performance is evaluated through a comprehensive testing process.

Finite Element Analysis

Through the use of powerful computers and Finite Element Analysis (FEA) software specifically designed for elastomeric evaluation, Parker engineers can predict a seal's performance in a variety of media, temperatures and pressures before a single part is made. This eliminates the need for costly tooling, speeds the production process and ensures the selection of the right material and geometry for a customer's application.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

2

ORD 5712 O-Ring Material Offering Guide

Literature

Since its initial release decades ago, the Parker O-Ring Handbook (ORD 5700) has been a fixture on the reference shelves of engineers and seal specifiers worldwide. This book contains extensive information about the properties of basic sealing elastomers, as well as examples of typical O-ring applications, fundamentals of static and dynamic seal design and o-ring failure modes. It also provides an overview of international sizes and standards, and contains compatibility data for fluids, gases and solids. Abridged versions of the handbook, available as ORD 5712 (US) and 5705 (Europe), provides engineers with fast access to information on standard sizes and materials.

INTRODUCTION

Desktop Seal Design

Parker's Total inPHormTM software brings seal design and material specification right to the engineer's desktop. The software, which consists of modules for O-ring, hydraulic and pneumatic, static face and standard composite seal products (as well as EMI shielding and thermal management), uses a simple interface to guide users through the design of application-specific glands and seals. It automatically cross-references thousands of part numbers, and recommends materials based on the requirements of SAE, MIL and other standards. Total inPHorm also contains a complete array of online reference material, including test reports, technical bulletins and seal maintenance instructions. In addition to the English version, the CD-ROM is also available in German and French.

Online Tools

The Parker O-Ring Division's website at www.parkerorings.com offers many time-saving tools, including temperature and dimension converters, gland design recommendation charts, a troubleshooting utility and a pressure calculator. The site also features an interactive compatibility guide that recommends elastomeric compounds for use in hundreds of fluids - from Abietic Acid to Zirconium Nitrate.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

3

ORD 5712 O-Ring Material Offering Guide

Product Lines

O-Rings

· ManufacturedtoUSandinternationalstandards:AS568B,ISO 3601, DIN 3771, JIS and metric. Custom sizes of almost any dimension. · MiniatureO-rings,largespecialO-rings,continuouslymolded and spliced cord. · Perfluorinated(FFKM)O-rings,custommoldedproductsanddiecuts. Broadest chemical resistance, highest purity and temperatureresistanceofanyelastomericfamily-upto320°C/608°F.

Parbak® Back-up Rings

Prevent extrusion in high-pressure applications and help retain lubricant, extending O-ring life.

O-Ring Kits

KitsareconvenientlyarrangedwithvarioussizeO-ringsforrepair, assembly and workshop.

Accessories

Products to assist O-ring users include assembly greases and lubricants, sizing cones and extraction tools.

Parker Hannifin Corporation · O-Ring Division

4

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Material Offering

INTRODUCTION

Compounds

O-rings can be molded in a wide range of compounds in hardnessesfrom40to95ShoreA.Thesematerialsinclude:

· · · · · · Acrylonitrile-Butadiene(NBR) · Chloroprene(CR) · EthylenePropylene(EPDM) · Fluorosilicone(FVMQ) · Perfluoroelastomer(FFKM) · Silicone(VMQ) Butyl(IIR) EthyleneAcrylic(AEM) Fluorocarbon(FKM) HydrogenatedNitrile(HNBR) Polyacrylate(ACM)

Parker O-ring compounds are formulated to meet the most stringent industry standards, including NSF, Underwriters Laboratories (UL), Military (MIL-SPEC), Aerospace (AMS), NASA, FDA, USDA, USP, and many customer-specific requirements.

Wynn's Numbering System

Parker Hannifin acquired Wynn's International, parent company of Wynn's Precision and Goshen Rubber, in July 2000. As a result, some Wynn's products and materials were added to the Parker O-Ring Division's offering. The Wynn's compound numbering system has been phased out; however, the old numbers are noted in parentheses (XXXXX) wherever applicable for reference purposes.

Parker Hannifin Corporation · O-Ring Division

5

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Parker O-Ring Compound Numbering Systems

Note:TherearetwotypesofnomenclatureusedtoreferenceParkerO-Ring products. See tables below for description of these types. TYPE I N Polymer Code (Single Letter) 0674 Sequence Number (four digits) TYPE II A Polymer Code (Single Letter) A Special Property Description (Single Letter) 150 Sequence Number (three digits) -70 Durometer Indicator (two digits) -70 Durometer Indicator (two digits)

Polymer Codes

A B C E F H K Polyacrylate Butyl Chloroprene (Neoprene®) Ethylene Propylene Parofluor ULTRATM HifluorTM HNBR L N P S V Z Fluorosilicone Nitrile (Buna N) and HNBR Polyurethane Silicone Fluorocarbon, AFLAS®, HifluorTM, ParofluorTM Exotic Polymers

Special Property Descriptions

A B E F G J L M P W X General Purpose Low Compression Set Ethylene Acrylate or (Vamac®) Fuel Resistant or Fully Fluorinated Higher Fluorine Content NSF / FDA / WRAS Approvals Internally Lubed Mil/ AMS Specifications Low Temperature Flexible or (AFLAS) Non-Black Compound Carboxylated

Durometer Indicators (Hardness)

-40 40 ±5 -45 45 ±5 -50 50 ±5 -55 55 ±5 -60 60 ±5 -65 65 ±5 -70 70 ±5 -75 75 ±5 -80 80±5 -85 85±5 -90 90 ±5 -95 95 ±5 Shore A Durometer Shore A Durometer Shore A Durometer Shore A Durometer Shore A Durometer Shore A Durometer Shore A Durometer Shore A Durometer ShoreADurometer ShoreADurometer Shore A Durometer Shore A Durometer

AFLAS® is a registered trademark of Asahi Glass Co., Ltd. Vamac® is a registered trademark of E.I. du Pont de Nemours & Co. Neoprene® is a registered trademark of DuPont Performance Elastomers

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

6

ORD 5712 O-Ring Material Offering Guide

MATERIAL OFFERING

Compound No.

Recommended For

Temp. Range (°F)

Color

POLYACRYLATE (ACM)

ACM (acrylic rubber) has good resistance to mineral oil, oxygen and ozone. The water compatibility and cold flexibility of ACM are considerably worse than with NBR. AA150-70 (12307) AA154-75(12358) Engines & Transmissions Engines&Transmissions -5 to 350 -5to350 Black Black

ETHYLENE ACRYLATE (AEM)

Ethylene acrylate is a mixed polymer of ethylene, methyl acrylate and a small amount of carboxylated cure-site monomer. Developed as a lower-temperature version of Polyacrylate, but swells slightly more. Polymer is sold under the tradename VAMAC®. AE152-70(12897) AE153-75 (12917) AE154-75(12867) Transmissions Transmissions, Internally Lubed Vamac,Transmission Applications -40to325 -40 to 325 -40to325 Black Black Black

BUTYL RUBBER (IIR)

Butyl rubber (isobutylene-isoprene rubber or IIR) has a very low permeability rate and good electrical properties, but poor short-term rebound. B0318-70 B0612-70 B1167-80 AMS3238 Vacuum, General Purpose Vacuum,GeneralPurpose -75to250 -75 to 250 -75to250 Black Black Black

POLYCHLOROPRENE RUBBER (CR)

Also known by the tradename Neoprene®, polychloroprene was the first synthetic rubber and exhibits generally good ozone, aging, and chemical resistance. It has good mechanical properties over a wide temperature range. C0267-50 C0557-70 C0873-70 C0944-70 C1124-70 C1276-70 MIL-G-1149 Ty I Cl I AMS3208,LowTemp. Drive Belt Applications GeneralPurpose General Purpose AMS 3209, Low Temp. Low Compression Set -60 to 250 -35 to 250 -35to225 -35 to 250 -60 to 250 -35 to 250 Black Black Black Red Black Black

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

7

ORD 5712 O-Ring Material Offering Guide

Compound No. CL172-70 (2347) C1278-80 CB173-80(2598)

Recommended For Internally Lubed LowCompressionSet GoodRetainedResilience

Temp. Range (°F) -35 to 225 -35to250 -35to250

Color Black Black Black

ETHYLENE PROPYLENE RUBBER (EPM, EPR, EPDM)

EPM (EPR) is a copolymer of ethylene and propylene. EPDM is a terpolymer of ethylene, propylene, and a diene third monomer used for cross-linking. E1100-50 EA454-50 (3575) E1157-60 E1561-60 E0751-65 E0603-70 E0667-70 E0803-70 E1022-70 E1028-70 E1244-70 E1257-70 E1512-70 E1514-70 E1549-70 E1570-70 E1571-70 E1583-70 E3609-70 EB152-70 (3407) EJ273-70 EJ274-70 EJ280-70 E0692-75 E0740-75 E0515-80 E0540-80 E0893-80 General Purpose UL Listed General Purpose NSF61,KTW,WRAS Drive Belt Applications General Purpose Auto Disc Brakes GeneralPurpose Internally Lubed, Brakes FDA NSF 61, Internally Lubed Chloramine Resistant, NSF 61 Chloramine Resistant, NSF 61, Internally Lubed Chloramine Resistant NSF61,WRAS,KTW,FDA NSF 61, Internally Lubed NSF 61 NSF51,NSF61, Internally Lubed NSF 51, NSF 61, WRAS, KTW,FDA,USPClassVI General Purpose Chloramine Resistant Internally lubed, NSF 61 Chloramine Resistant USPVI,FDA,Animal-Free Steam, High Temp. Water Nuclear Applications NAS1613Rev2 GeneralPurpose GeneralPurpose -70 to 250 -70 to 250 -70 to 250 -70to250 -70 to 250 -70 to 250 -70 to 250 -70to250 -70 to 250 -70to250 -70 to 250 -70 to 250 -70 to 250 -70 to 250 -70to250 -70 to 250 -70 to 250 -70to250 -70 to 250 -70 to 250 -70 to 250 -70 to 250 -70to250 -70 to 250 -70 to 250 -70to250 -70to250 -70to250 Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Purple

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

8

ORD 5712 O-Ring Material Offering Guide

MATERIAL OFFERING

Compound No. E1267-80 E0652-90 E0962-90

Recommended For NAS1613Rev5 General Purpose, Back-Up Rings Excellent Steam to 500° F, ED Resistant

Temp. Range (°F) -70to250 -60 to 250 -60 to 250

Color Black Black Black

FLUOROSILICONE (FVMQ)

Fluorosilicone is a silicone polymer chains with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone. LM151-50 (11645) LM152-60 (11646) LM158-60 LM153-70 (11647) LM159-70 L1120-70 LM161-70(11847) L1077-75 LM155-80(11648) LM160-80 L1218-80 L1186-80 General Purpose General Purpose AMS-R-25988,TY1,CL1, GR 60, AMS 3325 General Purpose AMS-R-25988,TY1,CL1, GR 70 AMS-R-25988,TYI, CL I, GR 70, UL listed GeneralPurpose AMS-R-25988, TY I, CL III, GR 75 GeneralPurpose AMS-R-25988,TY1,CL1, GR80 AMS-R-25988, TYI,CLI,GR80 PTFELoaded -100 to 350 Blue -100 to 350 Blue -100to350 lue B -100 to 350 -100to350 -100to350 -100to350 -90to350 -90to350 -90to350 -90to350 -85to350 Blue Blue Blue Blue Blue Blue Blue Blue Rust

ACRYLONITRILE-BUTADIENE (NBR)

Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. Theacrylonitrilecontentofnitrilesealingcompoundsvariesconsiderably(18to 50%.) Polymers with higher ACN content exhibit less swell in gasoline and aromatic solvents, while lower ACN polymers exhibit better compression set and low temperature flexibility. Polymer is also called Buna-N. N0545-40 N0299-50 NL151-50(8315) N0406-60 AMS 3201 AMS 3205, UL listed InternallyLubed General Purpose -45 to 225 -55 to 225 -55to225 -40 to 225 Black Black Black Black

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

9

ORD 5712 O-Ring Material Offering Guide

Compound No. N0525-60 N1219-60 NF284-60(1053) NF162-65 (1106) NM506-65 NX352-70 (7727) NJ253-70 (7077) NF153-70(7657) NA151-70(8307) NL153-70(8317) 47-071 N0103-70 N0287-70 N0497-70 N0602-70 N0674-70

Recommended For

Temp. Range (°F)

Color Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black

N0757-70 N0818-70 N0828-70 N1069-70 N1220-70 N1470-70 N1499-70 N1510-70 N1517-70 N1527-70 NW163-75 (40601) NM156-75 (7377) N0304-75 N0508-75 N0756-75 N0951-75 N1500-75

AMS 3212, AMS 3220 -25 to 250 NSF 51, FDA -30 to 225 FuelResistant -25to250 Fuel Resistant -25 to 250 AMS7271 -70to180 Carboxylated -25 to 250 FDA -35 to 212 FuelResistant,ULListed -70to180 SAE 120R1 Class II GeneralPurpose -30to250 InternallyLubed -30to250 AMS-R-7362 -60to180 Low Temp. -55 to 225 SyntheticLubricant -35to250 Resistant, AMS 7272 Low Swell, SAE 120R1 -35 to 212 CL ll UL listed GeneralPurpose, -70to180 AMS-P-5315, Low Temp. General Purpose -30 to 250 MIL-G-21569, Cl I, UL listed NSF 61, UL Listed -30 to 225 InternallyLubed -30to250 InternallyLubed,LowSet -30to225 FDA -30to180 NSF 51, FDA -30 to 225 General Purpose -40 to 225 General Purpose, UL -30 to 250 NSF 61 -30 to 225 NSF 61 -30 to 225 UL Listed -30 to 225 Internally Lubed -30 to 225 Good Low Temp. -65 to 225/250 MIL-P-25732 -65 to 225/250 FDA,USDA -30to180 AMS-P-83461 -65to250/275 High Temp, Low -25 to 275 Compression Set Low Swell, UL Listed, -35 to 212 Fuel applications

Black Black Black Black Black Black Black Black Black Black Rust Black Black Black Black Black Black

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

10

ORD 5712 O-Ring Material Offering Guide

MATERIAL OFFERING

Compound No. N1565-75 N1591-75 NA155-80(7538) N0750-80 N1090-85 NB107-90 (1929) N0300-90 N0507-90 N0552-90 N0702-90 N1059-90 N1444-90 N1490-90 NB194-90

Recommended For UL Listed UL Listed AbrasionResistant Carboxylated "ELF"Pneumatic, Carboxylated Extrusion Resistant BackUpRings AMS-P-5510,LowTemp. General Purpose Low Compression Set Low Compression Set Parbaks only General Purpose Low Extrusion Set, Extrusion Resistant

Temp. Range (°F) -30 to 225 -30 to 225 -25to250 -25to250 -25to225 -25 to 225 -40to180 -65to180 -30 to 250 -30 to 275 -30 to 275 -30 to 250 -30 to 250 -30 to 250

Color Black Black Black Black Black Black Black Black Black Black Black Black Black Black

HYDROGENATED NITRILE (HNBR, HSN)

Hydrogenated nitrile was developed as an air-resistant variant of nitrile rubber. In HNBR, the carbon-carbon double bonds in the main polymer chain are saturated with hydrogen atoms in a process called "hydrogenation" that improves the material's thermal stability and oxidation resistance. KB190-50(21705) KA170-55(21105) KB181-60(21926) N1173-70 N1195-70 N1206-70 N1239-70 KA157-70(21407) KB161-70(21377) KA174-75(21107) N1231-80 KA453-80(21508) KB162-80(21378) KA183-85 KB163-90(21379) N4007-95 AutomotiveApplications ULListed DieselApplications General Purpose Refrigerants Low Temp. Refrigerants GeneralPurpose HighTemp.Hydraulics 75 Duro, General Purpose Explosive Decompression LowSwell,EDResistant HighTemp.Hydraulics LowTemp. HighTemp.Hydraulics ED Resistant Extrusion Resistant, ED Resistant -25to300/325 -25to300/325 -25to300/325 -25 to 300/325 -25 to 300/325 -40 to 300/325 -25 to 300/325 -30to300/325 -25to300/325 -25 to 300/325 -25 to 300/325 -25to300/325 -25to300/325 -55to300/320 -25to300/325 -25 to 300/325 Black Black Black Black Green Green Red Black Black Black Black Black Black Black Black Black

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

11

ORD 5712 O-Ring Material Offering Guide

Compound No.

Recommended For

Temp. Range (°F)

Color

POLYURETHANE (AU, EU)

Polyurethane elastomers have excellent wear resistance, high tensile strength and high elasticity in comparison with any other elastomers. Permeability is good and comparable with butyl. Millable urethanes should not be confused with thermoplastic urethanes, which are generally harder, less flexible, and have slightly better wear resistance. P0642-70 DriveBeltApplications, Millable Type -40to180 Black

SILICONE RUBBER (VMQ, PVMQ)

Silicones possess good insulating properties and tends to be physiologically neutral. However, silicone elastomers have relatively low tensile strength, poor tear and wear resistance. S0469-40 S0802-40 S0595-50 S0899-50 SM151-50 (11355) S1538-55 S0317-60 S0613-60 SM152-60 (11356) S0383-70 S0455-70 S0604-70 AMS 3301 -75 to 400 FDA -60to400 AMS 3302 -70 to 400 ZZ-R-765CL1a,1b,2a,2b -103to400 GR 50 UL Listed -70 to 400 FDA,USPCLVI -60to450 FDA, USDA, USP CL VI -103 to 450 ZZ-R-765 Cl 2b, Gr 60, -60 to 450 AMS 3303 UL Listed -60 to 450 ZZ-R-765Cl1a,1b, -175to400 Gr 70, AMS 3337 High Temp. -65 to 450/500 ZZ-R-765 Cl 2a, 2b, Gr 70 -65 to 450 AMS 3304, AMS 3357 MIL-G-21569 FDA -60to400 ZZ-R-765 Cl 2a, 2b, Gr 70 -65 to 450 AMS 3304, AMS 3357 MIL-G-21569 UL Listed -60 to 450 AMS 7267, FDA, USDA -60 to 450 ZZ-R-765Cl2a,2b -65to450 Gr80,AMS3305 Rust White Rust Rust Rust Trans Rust Rust Rust Rust Rust Rust

S1138-70 S1224-70

Rust Rust

SM153-70 (11357) S0355-75 S0614-80

Rust Rust Rust

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

12

ORD 5712 O-Ring Material Offering Guide

MATERIAL OFFERING

Compound No.

Recommended For

Temp. Range (°F)

Color

FLUOROCARBON (FKM, FPM)

Fluorocarbon(FKM)hasexcellentresistancetohightemperatureandabroad range of chemicals. Permeability and compression set are excellent. V0986-50 V0763-60 V0769-60 VA150-65 (19356) V1262-65 VW252-65 V0680-70 VB185-70 V1033-70 V0747-75 V0848-75 V0884-75 V1163-75 V1164-75 V1226-75 V1260-75 V1263-75 V1274-80 V1289-75 VA203-75 (16737) VB153-75 (19717) VG162-75 (19727) VW153-75 (16207) VW173-75 (19457) V1436-75 V1475-75 GeneralPurpose General Purpose General Purpose General Purpose Low Swell - Flex Fuel Blends UL listed Low Swell FDA,USDA,NSF51 AcidResistant General Purpose AMS-R-83248,TYI,CLI, UL listed PTFELoaded GeneralPurpose,ULlisted "GFLTType" ,ULlisted,E85 Low Set, AMS 7276, AMS-R-83248,TYI,CLI Low Set, AMS 7276, UL listed, AMS-R-83248,TYI,CLI Very Chemically Resistant "VitonExtreme"Type Low Swell - Flex Fuel BlendsULlisted,E85 NoMetalOxides"GF"Type, Low Swell, Steam, USP VI LowTemp. Extrusion Resistant, Diesel Fuel Injectors Good Compression Set, Fuels Good Fuel Resistance General Purpose Automotive Applications General Purpose, UL Listed General Purpose -15to400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15to400 -15to400 -15 to 400 -15to400 -15to400 -15to400 -35to400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15to400 -50to400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 Brown Brown Black Black Black Green Red Black White Black Black Brown Black Black Brown

Black Black Black Black Black Black Black Brown Green Black Black

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

13

ORD 5712 O-Ring Material Offering Guide

Compound No. V1476-75 VA151-75 (19357) VM835-75 VA163-80(19318) VP104-85 V0709-90 V0894-90 V1411-90 V1412-90 VA153-90 (19359) VW155-90 (16129) V1238-95 VA154-95 (16949)

Recommended For General Purpose General Purpose, UL AMS-R-83485,"GLTType" InternallyLubed SourGasResistant AMS-R-83248,TYI,ClII AMS 7259 GeneralPurpose General Purpose General Purpose General Purpose General Purpose ExtrusionResistant, ED Resistant Extrusion Resistant

Temp. Range (°F) -15 to 400 -15 to 400 -40to400 -15to400 +10to+400 -15to400 -15to400 -15 to 400 -15 to 400 -15 to 400 -15 to 400 -15to400 -15 to 400

Color Brown Black Black Black Black Black Brown Black Brown Black Green Black Black

TETRAFLUOROETHYLENE - PROPYLENE (AFLAS)

This material is a copolymer of TFE and propylene. Its chemical resistance is excellent across a wide range of aggressive media. Polymer is sold under the tradename Aflas®. V1006-75 VP101-80(20018) VP102-80 V1041-85 VP103-90 (20019) AMS 7255 GeneralPurpose GoodCompression Set Resistance EDResistant Sour Service 25 to 450 25to450 15to450 15to450 25 to 450 Black Black Black Black Black

HIGHLY FLUORINATED ELASTOMER (HiFluor)

Hifluor is Parker's tradename for high performance fluoroelastomers ­ materials that "bridge the gap" between traditional fluorocarbon and perfluoroelastomer. V3819-75 V8534-90 ChemicallyResistant, Low Compression Set ChemicallyResistant, Extrusion Resistant -15to400 -15to400 Black Black

Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

14

ORD 5712 O-Ring Material Offering Guide

MATERIAL OFFERING

Compound No.

Recommended For

Temp. Range (°F)

Color

PERFLUOROELASTOMER (Parofluor)

Perfluoroelastomer is a rubber version of PTFE. Available from Parker under the tradenames ParofluorTM and Parofluor ULTRATM. V1266-65 V8545-75 V8562-75 V8581-90 V8588-90 Plasma, Low Closure Force AMS7257,High Temp., FDA LowLeachables,FDA Plasma,LowOutgassing ChemicallyResistant, Extrusion & ED Resistant 5 to 572 5 to 572 5to572 5to572 5to572 White Black White White Black

PERFLUOROELASTOMER (Parofluor ULTRA)

Perfluoroelastomer is a rubber version of PTFE. Available from Parker under the tradenames ParofluorTM and Parofluor ULTRATM. FF354-65 FF102-75 FF200-75 FF350-75 FF352-75 FF370-75 LowClosureForce Acid Resistant LowCompSet,AMS7257 FDA Plasma,HighPurity,FDA USP Class VI GeneralPurpose,Clean ThermalEtch,Plasma, Low Extractables, and Low particle generation Broad Chemical Resistance, FDA ExtrusionResistant, Low Compression Set 5to608 5 to 525 5to608 5to608 5to608 5to608 White Black Black White White Opaque Black Black Black

FF500-75 FF202-90

5 to 525 5to608

ParofluorTM is a registered trademark of the Parker Hannifin Corporation Parofluor ULTRATM is a registered trademark of the Parker Hannifin Corporation HifluorTM is a registered trademark of the Parker Hannifin Corporation Note:Compoundnumbersin(XXXXX)aretheobsoleteWynn'sPrecisioncompound numbering system.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

15

ORD 5712 O-Ring Material Offering Guide

Underwriters Laboratories Approved Services*

Suitable for use in UL 262 applications Suitable for UL 25 gasket applications Dry Chemical, Carbon Dioxide, Water Diesel Fuel, Fuel Oil, Lubricating Oil

SERVICE

Code EA454-50 (3575) EB152-XX (3407) KA170-50(21105) L1120-70 LM159-70 N0299-50 N0497-70 N0674-70 N1499-70 N1527-70 (67147) N1585-70 NF153-70 (7657) N1500-75 N1565-75(67027) N1591-75 (67357) V1262-65 V0747-75 V0884-75 V1163-75 V1226-75 V1263-75 V1436-75 VA151-75 (19357)

Suitable for use in UL 1081

Fire Extinguishing Agents

Gasoline/Alcohol Blends*

Dishwashing Detergents

Anhydrous Ammonia

MFG or Natural Gas

Naptha or Kerosene

Laundry Detergents

Heated Fuel Oil

MPS Gas

Gasoline

LP-Gas

A

B

C

D

E

F

G

H

I

J

L

M

* Contact factory for specific ratios of alcohol (methyl and/or ethyl) and gasoline. Note:Materialcertificationsaresubjecttochange.PleasecontactParker'sO-RingDivisionformoreinformation. Parker Hannifin Corporation · O-Ring Division

16

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

E85

ORD 5712 O-Ring Material Offering Guide

FDA, USDA, NSF 51, USP Approved Compounds

The Food and Drug Administration (FDA) has established a list of rubber compounding ingredients which tests have indicated are neither toxic nor carcinogenic. Rubber compounds produced entirely from those ingredients andwhichalsopasstheFDAextractiontestsaresaidto"meettheFDA requirements".TheFDAdoesnotapproverubbercompounds.Itisthe responsibility of the manufacturer to compound food grade materials from the FDA list of ingredients and establish whether they pass the necessary extraction requirements. Similar standards are established by the United States Department of Agriculture (USDA). Additional requirements have been imposed upon seal manufacturers regarding food and beverage service. Parker has developed several materials that are certified to NSF 51, Food and Beverage Standard. In critical medical applications,sealsoftenmustbemadefromaneven"cleaner"listof ingredients. The U.S. Pharmacopoeia (USP) Class VI outlines requirements forsystemtoxicityandintracutaneoustoxicityforthese"cleaner"compounds. The USP Class VI compounds must be made from ingredients with clear histories of biocompatibility that meet tighter requirements for leachates. Typical applications for our FDA, NSF 51, USDA materials are disposable medical devices, surgical instruments and medical fluid dispensing components, as well as a wide variety of food and beverage handling equipment. The type of approval/certification required generally rests with the end customer's regulatory expectations for the specific application. Parker Compound

EJ280-70 E1028-70 E3609-70 FF200-75 FF350-75 FF500-75 V8545-75 V8562-75 V0680-70 N1219-60 N1069-70 N1220-70

MATERIAL OFFERING

Polymer

EPDM EPDM EPDM FFKM FFKM FFKM FFKM FFKM FKM NBR NBR NBR

Hardness

70 70 70 75 75 75 75 75 70 60 70 70

Color

Black Black Black Black White Black Black White Red Black Black Black

Service

FDA, USP Class VI FDA NSF 51, FDA, USP Class VI FDA FDA, USP Class VI FDA FDA FDA NSF 51, FDA, USDA NSF 51, FDA FDA NSF 51, FDA

Continued on next page

Parker Hannifin Corporation · O-Ring Division

17

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

FDA, USDA, NSF 51, USP Approved Compounds

Parker Compound

N0508-75 S0802-40 S1538-55 S0317-60 S1138-70 S0355-75 V1274-80

Polymer

NBR VMQ VMQ VMQ VMQ VMQ FKM

Hardness

75 40 55 60 70 75 80

Color

Black White Translucent Rust Rust Rust Black

Service

FDA, USDA FDA FDA, USP Class VI FDA, USDA, USP Class VI FDA FDA, USDA USP Class VI

Parker Hannifin Corporation · O-Ring Division

18

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

NSF 61 Approved Compounds

NSF 61 Drinking Water System Components - is the nationally recognized health effects standard for all devices, components and materials which contact drinking water. Parker's O-Ring Division has developed several materials that are certified to NSF 61. Many of these materials are approved foruseintheUnitedKingdom(WRAS),andGermany(KTW)aswellasNorth America. NSF International is an industry regulating agency that was established in 1944. Recognized by ANSI (American National Standards Institute), NSF maintains qualification standards and criteria for a wide range of products, including potable water components and delivery systems.

Parker Compound E1561-60 (63446) Polymer Hardness Water Contact Temp. Commercial Hot** Service NSF61,WRAS,KTW,Ideal for High Volume Applications NSF61,WRAS,KTW, Excellent Compression Set Resistance, Ideal for High Volume Applications NSF 61, Internally Lubed, Ideal for High Volume Applications NSF 61, Internally Lubed NSF 61, Internally Lubed, Chloramine Resistant NSF 61, Internally Lubed NSF 61 NSF61,WRAS,KTW, Excellent Compression Set Resistance NSF 61, Chloramine Resistant, Internally Lubed NSF 61 NSF 61 NSF 61

MATERIAL OFFERING

EPDM

60

E1549-70 (63447)

EPDM

70

Commercial Hot**

E1583-70 (63017) E1244-70 E1512-70 E1570-70 E1571-70

EPDM

70

Commercial Hot** Commercial Hot** Commercial Hot** Commercial Hot** Commercial Hot** Commercial Hot** Commercial Hot** Cold Water*** Commercial Hot** Commercial Hot**

EPDM EPDM EPDM EPDM

70 70 70 70

E3609-70

EPDM

70

EJ274-70 N0757-70 N1510-70 (67997) N1517-70

EPDM NBR NBR NBR

70 70 70 70

* NSF 61 listed materials given a commercial hot water rating are also certified for cold water **CommercialHot=Testedat82°C(180°F) *** Cold Water = Tested at 23° C (73.4° F)

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

19

ORD 5712 O-Ring Material Offering Guide

Aerospace Materials

AMS and NAS Rubber Specification Descriptions

Rubber Specs

AMS3201 AMS3205 AMS3208 AMS3209 AMS3212 AMS3220 AMS3238 AMS3301 AMS3302 AMS3303 AMS3304 AMS3305 AMS3325 AMS3337 AMS3345 AMS3357 AMS7257 AMS7259 AMS7267 AMS7271 AMS7272

1 2

Parker Compound

N0545-40 N0299-50 C0267-50 C1124-70 N0525-60 N0525-60 B0318-70 S0469-40 S0595-50 S0613-60 S1224-70 S0604-70 S0614-80 LM158-60 S0383-70 S0899-50 S1224-70 S0604-70 V8545-70 FF200-75 V0709-90 S0355-75 NM506-65 N0287-70

Durometer

35-45 45-55 45-55 65-75 55-65 55-65 65-75 35-45 45-55 55-65 65-75 75-85 55-65 65-75 45-55 65-75 70-80 85-95 70-80 60-70 65-75

Description

Dry Heat Resistance Low Temperature Resistance Weather Resistant, Chloroprene Type Weather Resistant, Chloroprene Type Aromatic Fuel Resistant General Purpose, Fluid Resistant Phosphate-ester Resistant, Butyl Type Silicone, General Purpose Silicone, General Purpose Silicone, General Purpose Silicone, General Purpose Silicone, General Purpose Fluorosilicone Rubber, Fuel and Oil Resistant Silicone, Extreme Low Temperature Resistant Silicone Rubber Silicone Rubber, Lubricating Oil, Compression Set Resistant Sealing Rings, Perfluorocarbon, High Temperature Resistant High Temperature, Fluid Resistant, VeryLowCompressionSetFKM Silicone, Heat Resistant, Low Compression Set Fuel and Low Temperature Resistant Synthetic Lubricant Resistant

1. 2.

Aerospace Material Specification issued by the Society of Automotive Engineers, Inc. National Aerospace Standard issued by Aerospace Industries Association of America, Inc. Parker Hannifin Corporation · O-Ring Division

20

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Aerospace Materials

AMS and NAS Rubber Specification Descriptions

Rubber Specs

AMS7276 NAS1613 REV 5 AMS-P-5315 AMS-P-5510 AMS-R-7362 AMS-P-25732 MIL-P-25732 AMS-R-25988 Type 1 Class 1 LM158-60 L1120-70 LM159-70 LM160-80 Type 1 Class 3 AMS-R-83248 Type 1 Class 1 V1164-75 V1226-75 V0747-75 V0709-90 N0756-75 75 Rubber, Fluorocarbon Elastomer, High Temperature Fluid and Compression Set Resistant L1077-75 Grade 60 Grade 70 Grade80 Grade 75 Rubber, Fluorosilicone Elastomer, Oil and Fuel Resistant

1 2

MATERIAL OFFERING

Parker Compound

V1164-75 V1226-75 E1267-80 N0602-70 N0507-90 47-071

Durometer

70-80 75-85 65-75 85-95 65-75

Description

High Temperature, Fluid Resistant, VeryLowCompressionSetFKM Packing O-ring, Phosphate Ester Resistant Packing O-ring, Hydrocarbon Fuel Resistant Gasket, Straight Thread Tube Fitting Boss Rubber Sheet, Molded and Extruded Shapes, Synthetic Oil Resistant Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Performance

N0304-75

70-80

Type 1 Class 2 AMS-P-83461

90 70-80 Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures Rubber, Fluorocarbon Elastomer, High Temperature, Fuel, HTS Oil Resistant, Low Compression Set 70 or80Hardness,LowTemperature Tg -40°F.

AMS-R-83485

VM835-75

70-80

AMS 7379

V1289-75

Grade 75

1. 2.

Aerospace Material Specification issued by the Society of Automotive Engineers, Inc. National Aerospace Standard issued by Aerospace Industries Association of America, Inc. Parker Hannifin Corporation · O-Ring Division

21

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Military Rubber Specifications

Note:IncompliancewiththeFederalAcquisitionStreamliningAct(FASA),mostofthese specifications are being revised to AMS specifications. For the most current information, contact the O-Ring Division.

Rubber Specs

ZZ-R-765E/A-A-59588 Class 1a, 1b, 2a, 2b Class 1a, 1b Class 2a, 2b

Parker Compound

Description

Rubber, Silicone

S0899-50 S0383-70 S0614-80 S1224-70 S0604-70

103 to 437°F (-75 to 225°C)1, Low and High Temperature Resistant, Low Compression Set 80to437°F(-62to225°C)1, High Temperature, Low Compression Set Packing, O-ring, Hydrocarbon Fuel Resistant (Jet Fuels) (Military O-ring series MS29512 and MS29513) -65 to 160°F (-54 to 71°C)1 Gasket, Straight Thread Tube Fitting Boss (MIL-H-5606 Petroleum Based Hydraulic Fluid) -45 to 160°F (-43 to 71°C)1 (Military O-ringSeriesMS28778) Rubber, Sheet, Molded and Extruded Shapes, Synthetic Oil Resistant (AMS3021)

MIL-P-5315B N0602-70 MIL-P-5510C

N0507-90 MIL-R-7362D

Types I, II

47-071

Synthetic, Di-Ester Base Lubricant -65 to 275°F (-54 to 135°C)1 (Military O-ring series MS29561 and WAS617)

MIL-G-21569B Class I Class II N0674-70 S0604-70 Room Temperature to 194°F (90°C)1

1. These temperatures are limits for particular tests required by the specifications, but they do not necessarily represent operating temperature limits.

Parker Hannifin Corporation · O-Ring Division

22

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Military Rubber Specifications

Note:IncompliancewiththeFederalAcquisitionStreamliningAct(FASA),mostofthese specifications are being revised to AMS specifications. For the most current information, contact the O-Ring Division.

MATERIAL OFFERING

Rubber Specs

Parker Compound

Description

Packing, Preformed, Petroleum Hydraulic Fluid Resistant (MILH-5606)

MIL-P-25732C Types I, II N0304-75

Petroleum Base Hydraulic Fluid -65 to 275°F (-54 to 135°C)1 (MilitaryO-ringseriesMS28775)

MIL-R-25988 Type 1, Class 1, Grade 60/3 Type 1, Class 1, Grade 70/1 LM158-60 L1120-70 LM159-70 L1218-80 LM160-80 L1077-75 E0515-80 Packing, Preformed, Otto Fuel Compatible -65 to 250°F (-54 to 121°C)1 Rubber Fluorosilicone Elastomer, Oil and Fuel Resistant (MIL-H5606 Petroleum Base) Hydraulic Fluid,Fuel,Air(-90to350°F)(-68 to 176°C)1

Type1,Class1,Grade80/4 Type 1, Class 3, Grade 75/2 MIL-P-82744 MIL-R-83248C,TypeI Class I

V0747-75 V1164-75 V1226-75 V0709-90

Rubber, Fluorocarbon Elastomer, High Temperature Fluid and Compression Set Resistant -15 to 400°F (-5 to 105°C)1

Class II MIL-R-83485 Grade80

VM835-75

Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperature

MIL-P-83461B

N0756-75

Packings, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance -65 to 275°F (-54 to 135°C)1

1. These temperatures are limits for particular tests required by the specifications, but they do not necessarily represent operating temperature limits.

Parker Hannifin Corporation · O-Ring Division

23

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Parker Materials Certified by NORSOK

Sour Service Test Conditions

Volume % 30 10 60 Pressure Test Temperature (°C) 210 220 230 Test Temperature (°C) 180 190 200 Composition 3% CO2, 2% H2S, 95% CH4 Distilled Water (conductivity <5µS) 70% heptane, 20% cyclone-hexane, 10% toluene 100 bar FKM, FFKM, PTFE Materials Test Duration (Days) 5, 10, 20, 35 3, 6, 12, 21 2,4,8,14 HNBR Materials Test Duration (Days) 5, 10, 20, 35 3, 6, 12, 21 2,4,8,14

Sour Service Acceptance Criteria

Elastomers Acceptance Criteria Hardness Volume swelling Tensile Strength Elongation Modulus at 50% Visual inspection +10/-20 +25/-5% ± 50% ±50% ± 50% Thermoplastics Acceptance Criteria N/A +5/-1% ± 50% ± 50% ± 50%

The material shall show no tendency towards dissolution, cracking, blistering or physical deformation.

Parker Hannifin Corporation · O-Ring Division

24

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Parker Materials Certified by NORSOK

-continued-

MATERIAL OFFERING

Approved to Sour Service (H2S) and Sweet Service Conditions

Certificate Available Upon Request

NORSOK Acceptance Criteria: Passed Tensile, Visual and Volume Elastomers Material FF102-75 FF200-75 FF202-90 KB163-90 KA183-85 N4007-95 N4263-90 V1041-85 V1289-75 V8534-90 V8588-90 VP103-90 VP104-85 V1238-95 Type FFKM FFKM FFKM HNBR HNBR HNBR XNBR TFE FKM FFKM FFKM TFE FKM FKM AP02 AP05 AP09 AP31 AP45 AP63 AP66 AP68 APV6 N4031-A85 W4685 K2 Thermoplastics Material Type PTFE PTFE TFE TFM PTFE PTFE PEEK PEEK PTFE HNBR PEEK PEEKHPV/PTFE

Rapid Gas Decompression (RGD) Test Conditions

Volume % 3 97 Pressure Temperature Composition Carbon Dioxide - CO2 Methane - CH4 150 bar (reduced 20 bar/minute) 100°C

Parker Hannifin Corporation · O-Ring Division

25

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Parker Materials Certified by NORSOK

-continued-

RGD Acceptance Criteria

1. 2. 3. Examine four cut cross sections of the O-ring which has been subjected to RGD. Rate the cracks according to the table below. Ratings of 4 and 5 are unacceptable. Record the rating of each seal by listing the individual ratings in order of the highest first to the lowest last. Description No internal cracks, holes or blisters of any size. Less than 4 internal cracks, each shorter than 50% of the cross section, with a total crack length less than the cross section. Less than 6 internal cracks, each shorter than 50% of the cross section, with a total crack length of less than 2.5 times the cross section. Less than 9 internal cracks of which max. 2 cracks can have a length between50%and80%ofthecrosssection. Morethan8internalcracksoroneormorecrackslongerthan80%of the cross section. Crack(s) going through the cross section or complete separation of the seal into fragments. Rating 0 1 2 3 4 5

Example:Aratingof5422represents: · One section with 1 or more cracks going through the seal cross section. · Onesectionhadmorethan8cracksorminimum1crack>80%oftheseal cross section. · Two sections had < 6 cracks < 50% of the cross section.

Approved to RGD Requirement

Elastomer KB163-90 N4007-90 V1041-85 V1238-95 Type HNBR HNBR TFE FKM 10 Cycles 3100 2222 3100 3100 NORSOK Pass Pass Pass Pass

Parker Hannifin Corporation · O-Ring Division

26

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Engineering Tools

ENGINEERING TOOLS

The following charts are included to facilitate engineering analysis. Additional information is available in the Parker O-Ring Handbook (ORD 5700) or online at www.parkerorings.com

Parker Hannifin Corporation · O-Ring Division

27

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Extrusion

Limits for Extrusion

690.0 552.0 414.0 276.0 207.0 138.0

10,000 8,000 6,000 4,000 3,000 2,000

Fluid Pressure (Bar)

Fluid Pressure (PSI)

69.0 55.2 41.4 27.6 20.7 13.8

No Extrusion Hardness Shore A

Extrusion

1,000 800 600

70

80 90

400 300 200

6.9 mm 0 In. 0

.3 .010

.5 .020

.8 .030

100 1.0 .040

Total Diametral Clearance* (Radial Clearance if Concentricity Between Piston and Cylinder is Rigidly Maintained)

* Reduce the clearance shown by 60% when using silicone or fluorosilicone elastomers. 1. 2. 3. 4. 5. Basis for Curves 100,000 pressure cycles at the rate of 60 per minute from zero to the indicated pressure. Maximum temperature (i.e., test temperature) 71°C (160°F). No back-up rings. Total diametral clearance must include cylinder expansion due to pressure. Apply a reasonable safety factor in practical applications to allow for excessively sharp edges and other imperfections and for higher temperatures.

Parker Hannifin Corporation · O-Ring Division

28

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Gland Designs

GLAND DESIGNS

The following charts are included to facilitate engineering analysis. Additional information is available in the Parker O-Ring Handbook (ORD 5700) or online at www.parkeorings.com

Parker offers O-rings for use in static as well as dynamic sealing applications. Static seals are those where the mating parts of the gland do not have movement relative to each other. These seals include face, radial and dovetail. Examples of these seals and the corresponding design charts are found on pages 30-34. Dynamic seals include reciprocating, floating pneumatic, oscillating, and rotary applications. Dynamic seals are defined by one of the gland parts having movement relative to the other part. Gland design recommendations for a reciprocating seal are provided on pages 36 and 37. For further design assistance and recommendations, access our Total inPHorm Seal Design software, or contact a Parker O-Ring Division Applications Engineer.

Parker Hannifin Corporation · O-Ring Division

29

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

For Internal Pressure (outward pressure direction) dimension the groove by its outside diameter (HO) and width: (HO) = Mean O.D. of O-ring tolerance = Minus 1% of mean O.D., but not more than -.060

L

For External Pressure (inward pressure direction) dimension the groove by its inside diameter (HI) and widthy: (HI) = Mean I.D. of O-ring tolerance = Plus 1% of mean I.D., but not more than +.060

0° to 5° (Typ.)

*

Break Corners Approx. .005 RAD.

X R

Surface finish X: 32 for liquids 16 for vacuum and gases

63

Gland Detail Finishes are RMS values

63 X G

ID ID

L

Groove Depth (=Gland Depth)

W W W

.005 Max.

.003 Max.

*MeanOD=ID+(2XCrossSection)

Parker Hannifin Corporation · O-Ring Division

30

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

O-Ring Face Seal Glands

These dimensions are intended primarily for face type O-ring seals and low temperature applications.

Squeeze Actual .013 to .023 .020 to .032 .028to.042 .043 to .063 .058to.080 .082to.108 .112to138 22 to 27 22to28 .475to.485 .638to.645 21 to 29 .342 to .362 21 to 30 .270 to .290 20 to 30 .177to.187 20 to 30 .136 to .142 .120 to .125 .158to.164 .239 to .244 .309 to .314 .419 to .424 .560 to .565 19 to 32 .101 to .107 .084to.089 % Liquids Vacuum & Gases G Groove Width R Groove Radius .005 to .015 .005 to .015 .010 to .025 .020 to .035 .020 to .035 .030 to .035 .030 to .045

ORD 5712 O-Ring Material Offering Guide

AS568 B Uniform Dash No.

W Cross -Section

L

Nominal

Actual

Gland Depth

004 to 050

1/16

.070 ± .003

.050 to .054

102to178

3/32

.103 ± .003

.074to.080

201to284

1/8

.139 ± .004

.101 to .107

309 to 395

3/16

.210 ± .005

.152 to .162

GLAND DESIGNS

31

425 to 475

1/4

.275 ± .006

.201 to .211

Special

3/8

.375 ± .007

.276to.286

Special

1/2

.500±.008

.370to.380

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

Note:Thesedesignrecommendationsassumemetal-to-metalcontact.Insomehardvacuumapplications,itmaybenecessarytoincreasecompressiononthesealtoachievepropersealing. Contact a Parker Applications Engineer for more information.

Industrial O-Ring Static Seal Glands

Female Gland (e) 0° to 5° (Typ.) 32 R 63 F 32 G Gland Detail L 63 1/2 E Break Corners Approximately .005 RAD.

Male Gland

1/2 E

ORD 5712 O-Ring Material Offering Guide

1/2 E

Gland Depth

F Groove Depth (Ref.)

Finishes are RMS values.

32

Pressure Pressure G No Parbak Ring G1 One Parbak Ring

W

W

.005 Typ.

Pressure

W

W

I.D.

.003 Typ. G2 Two Parbak Ring

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

Section W-W

Industrial O-Ring Static Seal Glands

G Groove Width R Groove 2 Parbak Radius Ring (G) Ring (G1) Ring (G2) Max. Eccentricity (b) E (a) Diametral Clearance No Parbak 1 Parbak %

W Cross-Section

L

Squeeze

ORD 5712 O-Ring Material Offering Guide

AS568B Uniform Dash No.

Nominal

Actual

Gland Depth

Actual

004 - 050

1/16

.070 ± .003

.050 to .052

.015 to .023

22 - 32

.002 to .005

.093 to .098

.138 to .143

.205 to .210

.005 to .015

.002

GLAND DESIGNS

33

17 - 24 .002 to .005 .140 to .145 .171 to .176 16 - 23 .003 to .006 .187 to .192 .208 to .213 15 - 21 .003 to .006 .281 to .286 .311 to .316 15 - 20 .004 to .007 .375 to .380 .408 to .413

105-178

3/32

.103 ± .003

.081to.083

.017 to .025

.238 to .243

.005 to .015

.002

201-284

1/8

.139 ± .004

.111 to .113

.022 to .032

.275 to .280

.010 to .025

.003

309 - 395

3/16

.210 ± .005

.170 to .173

.032 to .045

.410 to .415

.020 to .035

.004

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

425 - 475

1/4

.275 ± .006

.226 to .229

.040 to .055

.538 to .543

.020 to .035

.005

(c) Reduce maximum diametral clearance 50% when using silicone or fluorosilicone O-rings. (d) For ease of assembly, when Parbaks are used, gland depth may be increased up to 5%.

(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation. (b) Total indicator reading between groove and adjacent bearing surface.

ORD 5712 O-Ring Material Offering Guide

O-Ring Dovetail Grooves

G

(to sharp corner)

L 66°

R R1

Mean groove diameter coincides with mean O-ring diameter.

Finishes are RMS values

It is often necessary to provide some mechanical means for holding an o-ring in a face seal groove during assembly and maintenance of equipment. An undercut or dovetail groove has proven beneficial in many applications to keep the o-ring in place. This is an expensive groove to machine, however, and thus should be used only when absolutely necessary. It should be noted that although this method has been used successfully, it is not generally recommended. The inherent characteristics of the groove design limit the amount of void area. Normally acceptable tolerance extremes, wide service temperature ranges and fluid media that cause high swell of the elastomer are conditions that cannot be tolerated in this type of groove design. NOTE: If needed, Applications Engineering can recommend where to purchase dovetail cutters.

Parker Hannifin Corporation · O-Ring Division

34

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

O-Ring Dovetail Grooves

Radius "R" is CRITICAL. Insufficient radius will potentially cause damage to the O-ring during installation, while excessive radius may contribute to extrusion.

ORD 5712 O-Ring Material Offering Guide

AS568 B Uniform Dash No. Squeeze % R R1 27 21 20 18 16 16 .315 to .319 .231 to .235 .171 to .175 .113 to .117 .083to.087 .010 .010 .015 .015 .020 .055 to .059 .005 1/64 1/64 1/32 1/32 1/16 3/32 .050 to .052 .081to.083 .111 to .113 .171 to .173 .231 to .234 .315 to .319

W Cross-Section G Gland Width (to sharp corner)

Nominal

Actual

L Gland Depth

004 - 050

1/16

.070 ± .003

102-178

3/32

.103 ± .003

201-284

1/8

.139 ± .004

309 - 395

3/16

.210 ± .005

GLAND DESIGNS

35

425 - 475

1/4

.275 ± .006

Special

3/8

.375 ± .007

Parker Hannifin Corporation · O-Ring Division

Note:Thesedesignrecommendationsassumemetal-to-metalcontact.Insomehardvacuumapplications,itmaybenecessarytoincreasecompressiononthesealtoachievepropersealing. Contact a Parker Applications Engineer for more information.

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

Industrial Reciprocating O-Ring Packing Glands

Rod Gland

Gland Detail

Break Corners Approx. .005 Typ. RAD.

ORD 5712 O-Ring Material Offering Guide

Piston Gland

0° to 5° (Typ.) 16 R

X X

1/2 E

32

Surface Finish X: 32 Without Parbak Ring 63 With Parbak Ring Finishes are RMS values

F

L

Gland Depth

G

F Groove Depth (Ref.)

36

Pressure Pressure

W W

W

.005 Typ.

Pressure

W

ID G

No Parbak Ring

.003 Typ.

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

G

One Parbak Ring

G

Two Parbak Rings

Industrial Reciprocating O-Ring Packing Glands

G Groove Width R Groove 2 Parbak Rings (G2) .205 to .210 .238 to .243 .275 to .280 .311 to .316 .281 to.286 .375 to .380 .408 to .413 .410 to .415 .538 to .543 Radius

W Cross-Section E (a) Diametral Clearance No Parbak 1 Parbak Ring (G1) .138 to .143 .171 to .176 .208 to .213 Ring (G) .002 to .005 .093 to.098 %

ORD 5712 O-Ring Material Offering Guide

AS568 B Uniform Dash No.

L

Squeeze

Max. Eccentricity (b)

Nominal

Actual

Gland Depth 15 - 25

Actual

006 to 012

1/16

.070 ± .003

.055 to .057

.010to.018

.005 to .015

.002

GLAND DESIGNS

37

10 - 17 .002 to .005 9 - 16 .003 to .006 .187to .192 8-14 .003 to .006 11 - 16 .004 to .007

104 to 116

3/32

.103 ± .003

.088to.090

.010to.018

.140 to .145

.005 to .015

.002

201 to 222

1/8

.139 ± .004

.121 to .123

.012 to .022

.010 to .025

.003

309 to 349

3/16

.210 ± .005

.185to.188

.017 to .030

.020 to .035

.004

Parker Hannifin Corporation · O-Ring Division

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

425 to 460

1/4

.275 ± .006

.237 to .240

.029 to .044

.020 to .035

.005

(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation. (b) Total indicator reading between groove and adjacent bearing surface. (c) O-rings not listed are not recommended for reciprocating applications.

ORD 5712 O-Ring Material Offering Guide

General Notes

Parker Hannifin Corporation · O-Ring Division

38

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Sizing Charts

SIZING CHARTS

The following charts provide dimensions for standard shrinkage materials only.ThesecorrespondtoAS568Bdimensions.O-ringsmanufactured from compounds with different shrinkage rates will provide slightly different dimensions and tolerances when standard tooling is used. Custom tooling may be necessary for some compounds in order to meet AS568Bdimensionsandtolerances.Forfurtherinformationcontact a Parker O-Ring Applications Engineer.

Parker Hannifin Corporation · O-Ring Division

39

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

2-xxx Sizes, Cross-Section: .070 ± .003 in (1,78 ± 0,08mm)

Parker No. Inside Dia. in. .029 .042 .056 .070 .101 .114 .145 .176 .208 .239 .301 .364 .426 .489 .551 .614 .676 .739 .801 .864 .926 .989 1.051 1.114 1.176 Tol. ± in. .004 .004 .004 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .007 .009 .009 .009 .009 .009 .009 .010 .010 .010 .011 Inside Dia. mm 0,74 1,07 1,42 1,78 2,57 3,68 3,68 4,47 5,28 7,65 7,65 9,25 10,82 12,42 14,00 15,60 17,17 18,77 20,35 21,95 23,52 25,12 26,70 28,30 29,87 Tol. ± mm 0,10 0,10 0,10 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,18 0,23 0,23 0,23 0,23 0,23 0,23 0,25 0,25 0,25 0,28

2-xxx Sizes, Cross-Section: .070 ± .003 in (1,78 ± 0,08mm)

Parker No. Inside Dia. in. 1.239 1.301 1.364 1.489 1.614 1.739 1.864 1.989 2.114 2.239 2.364 2.489 2,614 2.739 2.864 2.989 3.239 3.489 3.739 3.989 4.239 4.489 4.739 4.989 5.239 Tol. ± in. .011 .011 .013 .013 .013 .015 .015 .018 .018 .018 .018 .018 .020 .020 .020 .024 .024 .024 .027 .027 .030 .030 .030 .037 .037 Inside Dia. mm 31,47 33,05 34,65 37,82 41,00 44,17 47,35 50,52 53,70 56,87 60,05 63,22 66,40 69,57 72,75 75,92 82,27 88,62 94,97 101,32 107,67 114,02 120,37 126,72 133,07 Tol. ± mm 0,28 0,28 0,33 0,33 0,33 0,38 0,38 0,46 0,46 0,46 0,46 0,46 0,51 0,51 0,51 0,61 0,61 0,61 0,69 0,69 0,76 0,76 0,76 0,94 0,94

2-001* 2-002* 2-003* 2-004 2-005 2-006 2-007 2-008 2-009 2-010 2-011 2-012 2-013 2-014 2-015 2-016 2-017 2-018 2-019 2-020 2-021 2-022 2-023 2-024 2-025

2-026 2-027 2-028 2-029 2-030 2-031 2.032 2-033 2-034 2-035 2-036 2-037 2-038 2-039 2-040 2-041 2-042 2-043 2-044 2-045 2-046 2-047 2-048 2-049 2-050

(a) The rubber compound must be added when ordering by the 2-size number (i.e., N0674 2-007). (b) This chart provides dimensions for standard (AN) shrinkage materials ONLY. ThesecorrespondtoAS568Bdimensions.O-ringsmanufacturedoutofcompounds with different shrinkage rates (other than AN) will produce slightly different dimensions and tolerances. For more information on shrinkage rates, see Parker O-Ring Handbook (ORD 5700).

* Pleasenote: for2-001cross-sectionwidth=.040in(1,02mm) for 2-002 cross-section width = .050 in (1,27 mm) for 2-003 cross-section width = .060 in (1,52 mm)

Parker Hannifin Corporation · O-Ring Division

40

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

2-xxx Sizes, Cross-Section: .103 ± .003 in (2,62 ± 0,08mm)

Parker No. Inside Dia. in. .049 .081 .112 .143 .174 .206 .237 .299 .362 .424 .487 .549 .612 .674 .737 .799 .862 .924 .987 1.049 1.112 1.174 1.237 1.299 1.362 1.424 1.487 1.549 1.612 1.674 1.737 1.799 1.862 1.925 1.987 2.050 2.112 2.175 2.237 Tol. ± in. .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .005 .007 .009 .009 .009 .010 .010 .010 .010 .010 .010 .012 .012 .012 .012 .012 .012 .015 .015 .015 .015 .015 .015 .017 .017 .017 .017 .017 .017 Inside Dia. mm 1,24 2,06 2,84 2,84 4,42 5,23 6,02 7,59 9,19 10,77 12,37 13,94 15,54 17,12 18,72 20,30 21,89 23,47 25,07 26,64 28,24 29,82 31,42 32,99 34,59 36,17 37,77 39,34 40,94 42,52 44,12 45,69 47,29 48,90 50,47 52,07 53,64 55,25 56,82 Tol. ± mm 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,13 0,18 0,23 0,23 0,23 0,25 0,25 0,25 0,25 0,25 0,25 0,30 0,30 0,30 0,30 0,30 0,30 0,38 0,38 0,38 0,38 0,38 0,38 0,43 0,43 0,43 0,43 0,43 0,43

2-xxx Sizes, Cross-Section: .103 ± .003 in (2,62 ± 0,08mm)

Parker No. Inside Dia. in. 2.300 2.362 2.425 2.487 2.550 2.612 2.675 2.737 2.800 2.862 2.987 3.237 3.487 3.737 3.987 4.237 4.487 4.737 4.987 5.237 5.487 5.737 5.987 6.237 6.487 6.737 6.987 7.237 7.487 7.737 7.987 8.237 8.487 8.737 8.987 9.237 9.487 9.737 Tol. ± in. .020 .020 .020 .020 .020 .020 .022 .022 .022 .022 0.24 .024 .024 .028 .028 .030 .030 .030 .035 .035 .035 .035 .035 .040 .040 .040 .040 .045 .045 .045 .045 .050 .050 .050 .050 .055 .055 .055 Inside Dia. mm 58,42 59,99 61,60 63,17 64,77 66,34 67,95 69,52 71,12 72,69 75,87 82,22 88,57 94,92 101,27 107,62 113,97 120,32 126,67 133,02 139,37 145,72 152,07 158,42 167,77 171,12 177,47 183,82 190,17 196,52 202,87 209,22 215,57 221,92 228,27 234,62 240,97 247,32 Tol. ± mm 0,51 0,51 0,51 0,51 0,51 0,51 0,56 0,56 0,56 0,56 0,61 0,61 0,61 0,71 0,71 0,76 0,76 0,76 0,89 0,89 0,89 0,89 0,89 1,02 1,02 1,02 1,02 1,14 1,14 1,14 1,14 1,27 1,27 1,27 1,27 1,40 1,40 1,40

SIZING CHARTS

2-102 2-103 2-104 2-105 2-106 2-107 2-108 2-109 2-110 2-111 2-112 2-113 2-114 2-115 2-116 2-117 2-118 2-119 2-120 2-121 2-122 2-123 2-124 2-125 2-126 2-127 2-128 2-129 2-130 2-131 2-132 2-133 2-134 2-135 2-136 2-137 2-138 2-139 2-140

2-141 2-142 2-143 2-144 2-145 2-146 2-147 2-148 2-149 2-150 2-151 2-152 2-153 2-154 2-155 2-156 2-157 2-158 2-159 2-160 2-161 2-162 2-163 2-164 2-165 2-166 2-167 2-168 2-169 2-170 2-171 2-172 2-173 2-174 2-175 2-176 2-177 2-178

Parker Hannifin Corporation · O-Ring Division

41

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

2-xxx Sizes, Cross-Section: .139 ± .004 in (3,53 ± 0,10mm)

Parker No. Inside Dia. in. .171 .234 .296 .359 .421 .484 .546 .609 .671 .734 .796 .859 .921 .984 1.046 1.109 1.171 1.234 1.296 1.359 1.421 1.484 1.609 1.734 1.859 1.984 2.109 2.234 2.359 2.484 2.609 2.734 2.859 2.984 3.109 3.234 3.359 3.484 3.609 3.734 3.859 3.984 Tol. ± in. .055 .005 .005 .005 .005 .005 .007 .009 .009 .010 .010 .010 .010 .010 .010 .012 .012 .012 .012 .012 .012 .015 .015 .015 .018 .018 .018 .020 .020 .020 .020 .024 .024 .024 .024 .024 .024 .024 .028 .028 .028 .028 Inside Dia. mm 4,34 5,94 7,52 9,12 10,69 12,29 13,87 15,47 17,04 18,64 20,22 21,82 23,39 24,99 26,50 28,17 29,74 31,34 32,92 34,52 36,09 37,69 40,87 44,04 47,22 50,39 53,57 56,74 59,92 63,09 66,27 69,44 72,62 75,79 78,97 82,14 85,32 88,49 91,67 94,84 98,02 101,19 Tol. ± mm 0,13 0,13 0,13 0,13 0,13 0,13 0,18 0,23 0,23 0,25 0,25 0,25 0,25 0,25 0,25 0,30 0,30 0,30 0,30 0,30 0,30 0,38 0,38 0,38 0,38 0,46 0,46 0,51 0,51 0,51 0,51 0,60 0,61 0,61 0,61 0,61 0,61 0,61 0,71 0,71 0,71 0,71

2-xxx Sizes, Cross-Section: .139 ± .004 in (3,53 ± 0,10mm)

Parker No. Inside Dia. in. 4.109 4.234 4.359 4.484 4.609 4.734 4.859 4.984 5.109 5.234 5.359 5.484 5.609 5.734 5.859 5.984 6.234 6.484 6.734 6.984 7.234 7.484 7.734 7.984 8.234 8.484 8.734 8.984 9.234 9.484 9.734 9.984 10.484 10.984 11.484 11.984 12.984 13.984 14.984 15.955 16.955 17.955 Tol. ± in. .028 .030 .030 .030 .030 .030 .035 .035 .035 .035 .035 .035 .035 .035 .035 .035 .040 .040 .040 .040 .045 .045 .045 .045 .050 .050 .050 .050 .055 .055 .055 .055 .055 .065 .065 .065 .065 .065 .065 .075 .080 .085 Inside Dia. mm 104,37 107,54 110,72 113,89 117,07 120,24 23,42 126,59 129,77 132,94 136,12 139,29 142,47 145,64 148,82 151,99 158,34 164,69 171,04 177,39 183,74 190,09 196,44 202,79 209,14 215,49 221,84 228,19 234,54 240,89 247,24 253,59 266,29 278,99 291,69 304,39 32,79 355,19 380,59 405,26 430,66 456,06 Tol. ± mm 0,71 0,76 0,76 0,76 0,76 0,76 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 0,89 1,02 1,02 1,02 1,02 1,14 1,14 1,14 1,14 1,27 1,27 1,27 1,27 1,40 1,40 1,40 1,40 1,40 1,65 1,65 1,65 1,65 1,65 1,65 1,91 2,03 2,16

2-201 2-202 2-203 2-204 2-205 2-206 2-207 2-208 2-209 2-210 2-211 2-212 2-213 2-214 2-215 2-216 2-217 2-218 2-219 2-220 2-221 2-222 2-223 2-224 2-225 2-226 2-227 2-228 2-229 2-230 2-231 2-232 2-233 2-234 2-235 2-236 2.237 2-238 2-239 2-240 2-241 2-242

2-243 2-244 2-245 2-246 2-247 2-248 2-249 2-250 2-251 2-252 2-253 2-254 2-255 2-256 2-257 2-258 2-259 2-260 2-261 2-262 2-263 2-264 2-265 2-266 2-267 2-268 2-269 2-270 2-271 2-272 2-273 2-274 2-275 2-276 2-277 2-278 2-279 2-280 2-281 2-282 2-283 2-284

Parker Hannifin Corporation · O-Ring Division

42

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

2-xxx Sizes, Cross-Section: .210 ± .005 in (5,33 ± 0,13mm)

Parker No. Inside Dia. in. .412 .475 .537 .600 .662 .725 .787 .850 .912 .975 1.037 1.100 1.162 1.225 1.287 1.350 1.475 1.600 1.725 1.850 1.975 2.10 2.225 2.350 2.475 2.600 2.725 2.850 2.975 3.100 3.225 3.350 3.475 3.600 3.725 3.850 3.975 4.100 4.225 4.350 4.475 4.600 4.725 4.850 Tol. ± in. .005 .005 .007 .009 .009 .010 .010 .010 .010 .010 .010 .012 .012 .012 .012 .012 .015 .015 .015 .015 .018 .018 .018 .018 .020 .020 .020 .020 .024 .024 .024 .024 .024 .028 .028 .028 .028 .028 .030 .030 .030 .030 .030 .030 Inside Dia. mm 10,46 12,07 13,64 15,24 16,81 18,42 19,99 21,59 23,16 24,77 26,34 27,94 29,51 31,12 32,69 34,29 37,47 40,64 43,82 46,99 50,17 53,34 56,52 59,69 62,87 66,04 69,22 72,39 75,57 78,74 81,92 85,09 88,27 91,44 94,62 97,79 100,97 104,14 107,32 110,49 113,67 116,84 120,02 123,19 Tol. ± mm 0,13 0,13 0,18 0,23 0,23 0,25 0,25 0,25 0,25 0,25 0,25 0,30 0,30 0,30 0,30 0,30 0,38 0,38 0,38 0,38 0,46 0,46 0,46 0,46 0,51 0,51 0,51 0,61 0,61 0,61 0,61 0,61 0,61 0,71 0,71 0,71 0,71 0,71 0,76 0,76 0,76 0,76 0,76 0,76

2-xxx Sizes, Cross-Section: .210 ± .005 in (5,33 ± 0,13mm)

Parker No. Inside Dia. in. 4.975 5.100 5.225 5.350 5.475 5.600 5.725 5.850 5.975 6.225 6.475 6.725 6.975 7.225 7.475 7.725 7.975 8.225 8.475 8.725 8.975 9.225 9.475 9.725 9.975 10.475 10.975 11.475 11.975 12.975 13.975 14.975 15.955 16.955 17.955 18.955 19.955 20.955 21.955 22.940 23.940 24.940 25.940 Tol. ± in. .037 .037 .037 .037 .037 .037 .037 .037 .037 .040 .040 .040 .040 .045 .045 .045 .045 .050 .050 .050 .050 .055 .055 .055 .055 .060 .060 .065 .065 .065 .070 .070 .075 .080 .085 .090 .095 .095 .100 .105 .110 .115 .120 Inside Dia. mm 126,37 129,54 132,72 135,89 139,07 142,24 145,42 148,59 151,77 158,12 164,47 170,82 177,17 183,52 189,87 196,22 202,57 208,92 215,27 221,62 227,97 234,32 240,67 247,02 253,37 266,07 278,77 291,47 304,17 329,57 354,97 380,37 405,26 430,66 456,06 481,41 506,81 532,21 557,61 582,68 608,08 633,48 658,88 Tol. ± mm 0,94 0,94 0,94 0,94 0,94 0,94 0,94 0,94 0,94 1,02 1,02 1,02 1,02 1,14 1,14 1,14 1,14 1,27 1,27 1,27 1,27 1,40 1,40 1,40 1,40 1,52 1,52 1,65 1,65 1,65 1,78 1,78 1,91 2,03 2,16 2,29 2,41 2,41 2,54 2,67 2,79 2,92 3,05

SIZING CHARTS

2-309 2-310 2-311 2-312 2-313 2-314 2-315 2-316 2-317 2-318 2-319 2-320 2-321 2-322 2-323 2-324 2-325 2-326 2-327 2-328 2-329 2-330 2-331 2-332 2-333 2-334 2-335 2-336 2-337 2-338 2-339 2-340 2-341 2-342 2-343 2-344 2-345 2-346 2-347 2-348 2-349 2-350 2-351 2-352

2-353 2-354 2-355 2-356 2-357 2-358 2-359 2-360 2-361 2-362 2-363 2-364 2-365 2-366 2-367 2-368 2-369 2-370 2-371 2-372 2-373 2-374 2-375 2-376 2-377 2-378 2-379 2-380 2-381 2-382 2-383 2-384 2-385 2-386 2-387 2-388 2-389 2-390 2-391 2-392 2-393 2-394 2-395

Parker Hannifin Corporation · O-Ring Division

43

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

2-xxx Sizes, Cross-Section: .275 ± .006 in (6,99 ± 0,15mm)

Parker No. Inside Dia. in. 4.475 4.600 4.725 4.850 4.975 5.100 5.225 5.350 5.475 5.600 5.725 5.850 5.975 6.225 6.475 6.725 6.975 7.225 7.475 7.725 7.975 8.475 8.975 9.475 9.975 10.475 Tol. ± in. .033 .033 .033 .033 .037 .037 .037 .037 .037 .037 .037 .037 .037 .040 .040 .040 .040 .045 .045 .045 .045 .055 .055 .055 .055 .060 Inside Dia. mm 113,67 116,84 120,02 123,19 126,37 129,54 132,72 135,89 139,07 142,24 145,42 148,59 151,77 158,12 164,47 170,82 177,17 183,52 189,87 196,22 202,57 215,27 227,97 240,67 253,37 266,07 Tol. ± mm 0,84 0,84 0,84 0,84 0,94 0,94 0,94 0,94 0,94 0,94 0,94 0,94 0,94 1,02 1,02 1,02 1,02 1,14 1,14 1,14 1,14 1,40 1,40 1,40 1,40 1,52

2-xxx Sizes, Cross-Section: .275 ± .006 in (6,99 ± 0,15mm)

Parker No. Inside Dia. in. 10.975 11.475 11.975 12.475 12.975 13.475 13.975 14.475 14.975 15.475 15.955 16.455 16.955 17.455 17.955 18.455 18.955 19.455 19.955 20.955 21.955 22.940 23.940 24.940 25.940 Tol. ± in. .060 .060 .060 .060 .060 .070 .070 .070 .070 .070 .075 .075 .080 .085 .085 .085 .090 .090 .095 .095 .100 .105 .110 .115 .120 Inside Dia. mm 278,77 291,47 304,17 316,87 329,57 342,27 354,97 367,67 380,37 393,07 405,26 417,96 430,66 443,36 456,06 468,76 481,46 494,16 506,86 532,26 557,66 582,68 608,08 633,48 658,88 Tol. ± mm 1,52 1,52 1,52 1,52 1,52 1,78 1,78 1,78 1,78 1,78 1,91 1,91 2,03 2,16 2,16 2,16 2,29 2,29 2,41 2,41 2,54 2,67 2,79 2,92 3,05

2-425 2-426 2-427 2-428 2-429 2-430 2-431 2-432 2-433 2-434 2-435 2-436 2-437 2-438 2-439 2-440 2-441 2-442 2-443 2-444 2-445 2-446 2-447 2-448 2-449 2-450

2-451 2-452 2-453 2-454 2-455 2-456 2-457 2-458 2-459 2-460 2-461 2-462 2-463 2-464 2-465 2-466 2-467 2-468 2-469 2-470 2-471 2-472 2-473 2-474 2-475

Parker Hannifin Corporation · O-Ring Division

44

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

The following charts provide dimensions for standard shrinkage materials only. These correspondtoAS568Bdimensions.O-ringsmanufacturedfromcompoundswithdifferent shrinkage rates will provide slightly different dimensions and tolerances when standard tooling is used.CustomtoolingmaybenecessaryforsomecompoundsinordertomeetAS568B dimensions and tolerances. Contact a Parker O-Ring Applications Engineer with any questions.

SIZING CHARTS

3-9xx Sizes

Parker No. 3-901 3-902 3-903 3-904 3-905 3-906 3-907 3-908 3-909 3-910 3-911 3-912 3-913 3-914 3-916 3-918 3-920 3-924 3-928 3-932

(a) (b)

ID in. .185 .239 .301 .351 .414 .468 .530 .644 .706 .755 .863 .924 .986 1.047 1.171 1.355 1.475 1.720 2.090 2.337

Tol. ± in. .005 .005 .005 .005 .005 .005 .007 .009 .009 .009 .009 .009 .010 .010 .010 .012 .014 .014 .018 .018

Width in. .056 .064 .064 .072 .072 .078 .082 .087 .097 .097 .116 .116 .116 .116 .116 .116 .118 .118 .118 .118

Tol. ± in. .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .004 .004 .004 .004 .004 .004 .004 .004 .004 .004

ID mm 4,70 6,07 7,65 8,92 10,52 11,89 13,46 16,36 17,93 19,18 21,92 23,47 25,04 26,59 29,74 34,42 37,47 43,69 53,09 59,36

Tol. ± mm 0,13 0,13 0,13 0,13 0,13 0,13 0,18 0,23 0,23 0,23 0,23 0,23 0,26 0,26 0,26 0,30 0,36 0,36 0,46 0,46

W mm 1,42 1,63 1,63 1,83 1,83 1,98 2,08 2,21 2,46 2,46 2,95 2,95 2,95 2,95 2,95 2,95 3,00 3,00 3,00 3,00

Tol. ± mm 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10 0,10

The rubber compound must be added when ordering by the 3-size number (i.e., N0552 3-910). Material with unusual shrinkage during molding will give slightly different dimensions.

O-Rings for Metric Tube Fittings (ISO 6149) (Similar to SAE J2244)

Parker O-Ring Divison is tooled in these sizes for Nitrile and Fluorocarbon rubber only. Contact the division for availability. Port Thread M8x1 M10x1 M12x1.5 M14x1.5 M16x1.5 M18x1.5 M22x1.5 M27x2 M33x2 M42x2 M48x2 M60x2 O-Ring Name M8ISOO-Ring M10 ISO O-Ring M12 ISO O-Ring M14 ISO O-Ring M16 ISO O-Ring M18ISOO-Ring M22 ISO O-Ring M27 ISO O-Ring M33 ISO O-Ring M42 ISO O-Ring M48ISOO-Ring M60 ISO O-Ring Parker Part No. 0024-0063 0031-9063 0036-6087 0044-5087 0052-4087 0060-2087 0076-0087 0092-9114 0116-5114 0152-0114 0175-6114 0222-8114 ID mm 6,10 8,10 9,30 11,30 13,30 15,30 19,30 23,60 29,60 38,60 44,60 56,60 Tol. ± mm 0,13 0,13 0,13 0,13 0,15 0,18 0,20 0,23 0,30 0,36 0,41 0,46 W mm 1,60 1,60 2,20 2,20 2,20 2,20 2,20 2,90 2,90 2,90 2,90 2,90 Tol. ± mm 0,08 0,08 0,08 0,08 0,08 0,08 0,08 0,10 0,10 0,10 0,10 0,10

Parker Hannifin Corporation · O-Ring Division

45

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Parker Series 5-XXX O-Ring Sizes

The following 5-XXX sizes are o-rings of non-standard dimensions for which Parker tooling was available as of April 1, 2004. This tooling will be maintained while volume demand continues. A mold scrapped as defective will not be replaced unless demand justifies the expense. Please note 5-XXX tooling does not exist for Parofluor Family compounds. Note:Thesemoldsarecuttoallowforstandard"AN"shrinkageandinmaterialshaving standard shrinkage they will normally produce rings to the dimensions listed. Materials with other than standard shrinkage will give different dimensions and tolerances. Please consult the factory or your local Parker Distributor for the availability of special sizes not included in this list.

5-xxx Sizes

Parker No. 5-118 5-187 5-051 5-101 5-578 5-632 5-102 5-178 5-683 5-646 5-103 5-190 5-579 5-669 5-148 5-105 5-106 5-580 5-193 5-108 5-124 5-107 5-125 5-581 5-685 5-582 ID in. 0.059 0.070 0.070 0.100 0.102 0.110 0.116 0.120 0.122 0.126 0.128 0.132 0.133 0.146 0.154 0.154 0.154 0.165 0.176 0.176 0.176 0.176 0.180 0.192 0.208 0.224 Tol. ± in. 0.004 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 Width in. 0.040 0.036 0.040 0.038 0.074 0.040 0.038 0.040 0.063 0.040 0.050 0.070 0.074 0.040 0.038 0.050 0.066 0.074 0.040 0.050 0.056 0.066 0.040 0.074 0.094 0.074 Tol. ± in. 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 ID mm 1.50 1.78 1.78 2.54 2.59 2.79 2.95 3.05 3.10 3.20 3.25 3.35 3.39 3.71 3.91 3.91 3.91 4.19 4.47 4.47 4.47 4.47 4.57 4.88 5.28 5.69 Tol. ± mm 0.10 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 Width mm 1.02 0.91 1.02 0.97 1.88 1.02 0.97 1.02 1.60 1.02 1.27 1.78 1.88 1.02 0.97 1.27 1.68 1.88 1.02 1.27 1.42 1.68 1.02 1.88 2.39 1.88 Tol. ± mm 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08

Parker Hannifin Corporation · O-Ring Division

46

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-194 5-638 5-179 5-151 5-127 5-1002 5-197 5-180 5-686 5-583 5-052 5-202 5-698 5-584 5-687 5-1004 5-056 5-710 5-673 5-204 5-205 5-160 5-712 5-585 5-664 5-1006 5-206 5-1007 5-133 5-612 5-586 5-587 5-018 5-699 5-700 ID in. 0.228 0.233 0.239 0.239 0.239 0.239 0.242 0.248 0.248 0.251 0.270 0.278 0.283 0.283 0.287 0.290 0.301 0.301 0.305 0.312 0.312 0.312 0.313 0.314 0.320 0.322 0.326 0.330 0.332 0.344 0.350 0.350 0.352 0.353 0.354 Tol. ± in. 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 Width in. 0.040 0.076 0.040 0.051 0.074 0.174 0.040 0.048 0.094 0.074 0.070 0.046 0.040 0.074 0.094 0.045 0.038 0.054 0.074 0.036 0.092 0.103 0.051 0.074 0.070 0.070 0.103 0.050 0.031 0.070 0.074 0.106 0.113 0.094 0.118 Tol. ± in. 0.003 0.003 0.003 0.003 0.003 0.005 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.004 0.004 0.003 0.004 ID mm 5.79 5.92 6.07 6.07 6.07 6.07 6.15 6.30 6.30 6.38 6.86 7.06 7.19 7.19 7.29 7.39 7.65 7.65 7.75 7.92 7.92 7.92 7.95 7.98 8.13 8.18 8.28 8.38 8.43 8.74 8.89 8.89 8.94 8.97 8.99 Tol. ± mm 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 Width mm 1.02 1.93 1.02 1.30 1.88 4.42 1.02 1.22 2.39 1.88 1.78 1.17 1.02 1.88 2.39 1.14 0.97 1.37 1.88 0.91 2.34 2.62 1.30 1.88 1.78 1.78 2.62 1.27 0.79 1.78 1.88 2.69 2.87 2.39 3.00 Tol. ± mm 0.08 0.08 0.08 0.08 0.08 0.13 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.10 0.10 0.08 0.10

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

47

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-716 5-057 5-209 5-211 5-212 5-614 5-718 5-134 5-588 5-002 5-215 5-218 5-682 5-058 5-613 5-1011 5-222 5-223 5-225 5-615 5-725 5-652 5-726 5-566 5-230 5-231 5-675 5-616 5-1014 5-135 5-590 5-001 5-162 5-239 5-156 ID in. 0.362 0.364 0.370 0.375 0.384 0.391 0.395 0.410 0.413 0.416 0.418 0.425 0.426 0.426 0.437 0.447 0.455 0.458 0.469 0.469 0.470 0.473 0.484 0.489 0.500 0.501 0.508 0.516 0.525 0.526 0.535 0.547 0.554 0.570 0.575 Tol. ± in. 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.006 0.007 0.007 0.007 0.007 0.007 0.007 0.007 Width in. 0.118 0.045 0.040 0.187 0.070 0.103 0.040 0.031 0.106 0.059 0.094 0.025 0.040 0.050 0.070 0.103 0.128 0.053 0.094 0.103 0.270 0.071 0.056 0.055 0.125 0.062 0.049 0.103 0.071 0.031 0.106 0.051 0.070 0.106 0.060 Tol. ± in. 0.004 0.003 0.003 0.005 0.003 0.003 0.003 0.003 0.004 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.004 0.003 0.003 0.003 0.006 0.003 0.003 0.003 0.004 0.003 0.003 0.003 0.003 0.003 0.004 0.003 0.003 0.004 0.003 ID mm 9.19 9.25 9.40 9.53 9.75 9.93 10.03 10.41 10.49 10.57 10.62 10.80 10.82 10.82 11.10 11.35 11.56 11.63 11.91 11.91 11.94 12.01 12.29 12.42 12.70 12.73 12.90 13.11 13.34 13.36 13.59 13.89 14.07 14.48 14.61 Tol. ± mm 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.18 0.18 0.18 0.18 0.18 0.18 0.18 Width mm 3.00 1.14 1.02 4.75 1.78 2.62 1.02 0.79 2.69 1.50 2.39 0.64 1.02 1.27 1.78 2.62 3.25 1.35 2.39 2.62 6.86 1.80 1.42 1.40 3.18 1.57 1.24 2.62 1.80 0.79 2.69 1.30 1.78 2.69 1.52 Tol. ± mm 0.10 0.08 0.08 0.13 0.08 0.08 0.08 0.08 0.10 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.10 0.08 0.08 0.15 0.15 0.08 0.08 0.08 0.10 0.08 0.08 0.08 0.08 0.08 0.10 0.08 0.08 0.10 0.08

Parker Hannifin Corporation · O-Ring Division

48

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-563 5-735 5-736 5-591 5-609 5-242 5-021 5-243 5-676 5-247 5-248 5-617 5-250 5-251 5-005 5-136 5-643 5-252 5-254 5-743 5-592 5-256 5-594 5-257 5-593 5-181 5-964 5-263 5-264 5-266 5-137 5-595 5-006 5-751 5-003 ID in. 0.583 0.583 0.590 0.594 0.600 0.600 0.603 0.604 0.610 0.623 0.625 0.625 0.627 0.631 0.640 0.643 0.650 0.652 0.660 0.660 0.665 0.707 0.720 0.722 0.724 0.725 0.744 0.750 0.752 0.766 0.775 0.779 0.796 0.820 0.836 Tol. ± in. 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.008 0.009 0.009 Width in. 0.040 0.103 0.070 0.106 0.094 0.105 0.125 0.103 0.058 0.125 0.050 0.103 0.062 0.062 0.080 0.031 0.045 0.070 0.064 0.141 0.106 0.103 0.141 0.113 0.106 0.040 0.109 0.061 0.070 0.080 0.031 0.141 0.080 0.150 0.059 Tol. ± in. 0.003 0.003 0.003 0.004 0.003 0.004 0.004 0.003 0.003 0.004 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.004 0.004 0.003 0.004 0.004 0.004 0.003 0.004 0.003 0.003 0.003 0.003 0.004 0.003 0.005 0.003 ID mm 14.81 14.81 14.99 15.09 15.24 15.24 15.32 15.34 15.49 15.82 15.88 15.88 15.93 16.03 16.26 16.33 16.51 16.56 16.76 16.76 16.89 17.96 18.29 18.34 18.39 18.42 18.90 19.05 19.10 19.46 19.69 19.79 20.22 20.83 21.23 Tol. ± mm 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.23 0.23 Width mm 1.02 2.62 1.78 2.69 2.39 2.67 3.18 2.62 1.47 3.18 1.27 2.62 1.57 1.57 2.03 0.79 1.14 1.78 1.63 3.58 2.69 2.62 3.58 2.87 2.69 1.02 2.77 1.55 1.78 2.03 0.79 3.58 2.03 3.81 1.50 Tol. ± mm 0.08 0.08 0.08 0.10 0.08 0.10 0.10 0.08 0.08 0.10 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.10 0.10 0.08 0.10 0.10 0.10 0.08 0.10 0.08 0.08 0.08 0.08 0.10 0.08 0.13 0.08

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

49

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-596 5-708 5-753 5-049 5-273 5-022 5-138 5-597 5-598 5-278 5-139 5-709 5-677 5-279 5-761 5-618 5-599 5-004 5-763 5-600 5-140 5-601 5-291 5-1028 5-602 5-294 5-295 5-141 5-296 5-297 5-301 5-603 5-157 5-604 5-605 ID in. 0.838 0.850 0.857 0.871 0.879 0.890 0.898 0.905 0.968 0.979 0.987 1.000 1.004 1.004 1.010 1.016 1.031 1.070 1.080 1.094 1.112 1.153 1.186 1.190 1.212 1.213 1.225 1.226 1.229 1.230 1.259 1.279 1.338 1.342 1.401 Tol. ± in. 0.009 0.009 0.009 0.009 0.009 0.009 0.009 0.009 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.014 Width in. 0.141 0.045 0.123 0.140 0.040 0.125 0.031 0.141 0.141 0.103 0.031 0.055 0.081 0.218 0.062 0.139 0.141 0.065 0.050 0.141 0.031 0.141 0.070 0.250 0.141 0.149 0.275 0.031 0.070 0.197 0.092 0.141 0.092 0.141 0.141 Tol. ± in. 0.004 0.003 0.004 0.004 0.003 0.004 0.003 0.004 0.004 0.003 0.003 0.003 0.003 0.005 0.003 0.004 0.004 0.003 0.003 0.004 0.003 0.004 0.003 0.006 0.004 0.004 0.006 0.003 0.003 0.005 0.003 0.004 0.003 0.004 0.004 ID mm 21.29 21.59 21.77 22.12 22.33 22.61 22.81 22.99 24.59 24.87 25.07 25.40 25.50 25.50 25.65 25.81 26.19 27.18 27.43 27.79 28.24 29.29 30.12 30.23 30.78 30.81 31.12 31.14 31.22 31.24 31.98 32.49 33.99 34.09 35.59 Tol. ± mm 0.23 0.23 0.23 0.23 0.23 0.23 0.23 0.23 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.36 Width mm 3.58 1.14 3.12 3.56 1.02 3.18 0.79 3.58 3.58 2.62 0.79 1.40 2.06 5.54 1.57 3.53 3.58 1.65 1.27 3.58 0.79 3.58 1.78 6.35 3.58 3.78 6.99 0.79 1.78 5.00 2.34 3.58 2.34 3.58 3.58 Tol. ± mm 0.10 0.08 0.10 0.10 0.08 0.10 0.08 0.10 0.10 0.08 0.08 0.08 0.08 0.13 0.08 0.10 0.10 0.08 0.08 0.10 0.08 0.10 0.08 0.15 0.10 0.10 0.15 0.08 0.08 0.13 0.08 0.10 0.08 0.10 0.10

Parker Hannifin Corporation · O-Ring Division

50

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-780 5-008 5-670 5-142 5-312 5-657 5-606 5-980 5-024 5-320 5-158 5-009 5-321 5-788 5-034 5-327 5-143 5-329 5-1018 5-330 5-671 5-025 5-035 5-1023 5-335 5-794 5-1042 5-795 5-981 5-011 5-337 5-1043 5-144 5-796 5-338 ID in. 1.412 1.421 1.437 1.450 1.454 1.465 1.468 1.475 1.515 1.540 1.550 1.553 1.559 1.591 1.599 1.640 1.670 1.670 1.671 1.674 1.680 1.765 1.786 1.788 1.802 1.812 1.817 1.850 1.850 1.860 1.873 1.882 1.891 1.913 1.925 Tol. ± in. 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.014 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.016 0.017 0.017 0.017 0.017 Width in. 0.073 0.080 0.070 0.047 0.105 0.103 0.141 0.275 0.125 0.070 0.092 0.080 0.139 0.071 0.139 0.139 0.047 0.070 0.139 0.210 0.080 0.125 0.139 0.070 0.062 0.070 0.257 0.070 0.275 0.080 0.062 0.118 0.047 0.070 0.210 Tol. ± in. 0.003 0.003 0.003 0.003 0.004 0.003 0.004 0.006 0.004 0.003 0.003 0.003 0.004 0.003 0.004 0.004 0.003 0.003 0.004 0.005 0.003 0.004 0.004 0.003 0.003 0.003 0.006 0.003 0.006 0.003 0.003 0.004 0.003 0.003 0.005 ID mm 35.86 36.09 36.40 36.83 36.93 37.21 37.29 37.47 38.48 39.12 39.37 39.45 39.60 40.41 40.61 41.66 42.42 42.42 42.44 42.52 42.67 44.83 45.36 45.42 45.77 46.02 46.15 46.99 46.99 47.24 47.57 47.80 48.03 48.59 48.90 Tol. ± mm 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.41 0.43 0.43 0.43 0.43 Width mm 1.85 2.03 1.78 1.19 2.67 2.62 3.58 6.99 3.18 1.78 2.34 2.03 3.53 1.80 3.53 3.53 1.19 1.78 3.53 5.33 2.03 3.18 3.53 1.78 1.57 1.78 6.53 1.78 6.99 2.03 1.57 3.00 1.19 1.78 5.33 Tol. ± mm 0.08 0.08 0.08 0.08 0.10 0.08 0.10 0.15 0.10 0.08 0.08 0.08 0.10 0.08 0.10 0.10 0.08 0.08 0.10 0.13 0.08 0.10 0.10 0.08 0.08 0.08 0.15 0.08 0.15 0.08 0.08 0.10 0.08 0.08 0.13

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

51

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-701 5-342 5-343 5-655 5-037 5-346 5-642 5-1044 5-027 5-1046 5-145 5-347 5-348 5-800 5-1047 5-015 5-702 5-039 5-354 5-355 5-805 5-703 5-358 5-361 5-159 5-982 5-807 5-704 5-042 5-697 5-367 5-705 5-983 5-368 5-044 ID in. 1.937 1.980 2.000 2.020 2.036 2.046 2.051 2.060 2.140 2.140 2.141 2.163 2.172 2.225 2.281 2.296 2.312 2.411 2.471 2.524 2.535 2.563 2.576 2.671 2.683 2.725 2.782 2.812 2.846 2.878 2.924 2.937 2.975 3.020 3.036 Tol. ± in. 0.017 0.017 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.024 0.024 0.024 Width in. 0.139 0.038 0.075 0.070 0.139 0.139 0.070 0.139 0.125 0.315 0.047 0.062 0.070 0.275 0.093 0.080 0.139 0.139 0.070 0.103 0.070 0.139 0.082 0.139 0.115 0.275 0.103 0.139 0.139 0.080 0.103 0.139 0.275 0.103 0.139 Tol. ± in. 0.004 0.003 0.003 0.003 0.004 0.004 0.003 0.004 0.004 0.010 0.003 0.003 0.003 0.006 0.003 0.003 0.004 0.004 0.003 0.003 0.003 0.004 0.003 0.004 0.004 0.006 0.003 0.004 0.004 0.003 0.003 0.004 0.006 0.003 0.004 ID mm 49.20 50.29 50.80 51.31 51.71 51.97 52.10 52.32 54.36 54.36 54.38 54.94 55.17 56.52 57.94 58.32 58.72 61.24 62.76 64.11 64.39 65.10 65.43 67.84 68.15 69.22 70.66 71.42 72.29 73.10 74.27 74.60 75.57 76.71 77.11 Tol. ± mm 0.43 0.43 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.46 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.61 0.61 0.61 Width mm 3.53 0.97 1.91 1.78 3.53 3.53 1.78 3.53 3.18 8.00 1.19 1.57 1.78 6.99 2.36 2.03 3.53 3.53 1.78 2.62 1.78 3.53 2.08 3.53 2.92 6.99 2.62 3.53 3.53 2.03 2.62 3.53 6.99 2.62 3.53 Tol. ± mm 0.10 0.08 0.08 0.08 0.10 0.10 0.08 0.10 0.10 0.25 0.08 0.08 0.08 0.15 0.08 0.08 0.10 0.10 0.08 0.08 0.08 0.10 0.08 0.10 0.10 0.15 0.08 0.10 0.10 0.08 0.08 0.10 0.15 0.08 0.10

Parker Hannifin Corporation · O-Ring Division

52

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-369 5-810 5-811 5-1052 5-374 5-557 5-813 5-815 5-045 5-816 5-819 5-984 5-821 5-825 5-1053 5-380 5-979 5-381 5-985 5-031 5-828 5-986 5-390 5-987 5-831 5-1054 5-833 5-394 5-988 5-395 5-396 5-989 5-060 5-836 5-401 ID in. 3.037 3.041 3.060 3.080 3.112 3.125 3.130 3.156 3.161 3.162 3.210 3.225 3.300 3.350 3.354 3.363 3.443 3.475 3.600 3.640 3.661 3.725 3.957 3.975 4.020 4.080 4.085 4.096 4.100 4.117 4.171 4.225 4.390 4.427 4.531 Tol. ± in. 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.026 0.026 0.026 0.026 0.026 0.026 0.026 0.028 0.028 0.028 0.028 0.028 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.030 Width in. 0.103 0.062 0.112 0.111 0.070 0.103 0.100 0.060 0.139 0.070 0.103 0.275 0.070 0.275 0.070 0.155 0.275 0.275 0.275 0.125 0.090 0.275 0.147 0.275 0.147 0.209 0.103 0.070 0.275 0.070 0.070 0.275 0.044 0.140 0.070 Tol. ± in. 0.003 0.003 0.004 0.004 0.003 0.003 0.003 0.003 0.004 0.003 0.003 0.006 0.003 0.006 0.003 0.005 0.006 0.006 0.006 0.004 0.003 0.006 0.004 0.006 0.004 0.005 0.003 0.003 0.006 0.003 0.003 0.006 0.003 0.004 0.003 ID mm 77.14 77.24 77.72 78.23 79.04 79.38 79.50 80.16 80.29 80.31 81.53 81.92 83.82 85.09 85.19 85.42 87.45 88.27 91.44 92.46 92.99 94.62 100.51 100.97 102.11 103.63 103.76 104.04 104.14 104.57 105.94 107.32 111.51 112.45 115.09 Tol. ± mm 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.61 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.71 0.71 0.71 0.71 0.71 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 Width mm 2.62 1.57 2.84 2.82 1.78 2.62 2.54 1.52 3.53 1.78 2.62 6.99 1.78 6.99 1.78 3.94 6.99 6.99 6.99 3.18 2.29 6.99 3.73 6.99 3.73 5.31 2.62 1.78 6.99 1.78 1.78 6.99 1.12 3.56 1.78 Tol. ± mm 0.08 0.08 0.10 0.10 0.08 0.08 0.08 0.08 0.10 0.08 0.08 0.15 0.08 0.15 0.08 0.13 0.15 0.15 0.15 0.10 0.08 0.15 0.10 0.15 0.10 0.13 0.08 0.08 0.15 0.08 0.08 0.15 0.08 0.10 0.08

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

53

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-1060 5-840 5-842 5-844 5-402 5-848 5-850 5-403 5-851 5-852 5-853 5-559 5-407 5-408 5-410 5-412 5-855 5-856 5-413 5-414 5-858 5-416 5-062 5-417 5-063 5-862 5-863 5-421 5-573 5-567 5-1041 5-064 5-428 5-430 5-666 ID in. 4.609 4.630 4.664 4.682 4.750 4.875 4.925 4.930 4.984 5.030 5.057 5.236 5.249 5.265 5.340 5.414 5.444 5.465 5.475 5.487 5.500 5.553 5.604 5.616 5.750 5.789 5.815 5.882 5.968 5.985 6.023 6.350 6.361 6.482 6.520 Tol. ± in. 0.033 0.033 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 Width in. 0.150 0.139 0.122 0.140 0.188 0.060 0.260 0.103 0.147 0.210 0.233 0.214 0.123 0.139 0.070 0.103 0.124 0.070 0.164 0.062 0.168 0.120 0.070 0.127 0.070 0.252 0.140 0.110 0.070 0.070 0.103 0.275 0.108 0.170 0.070 Tol. ± in. 0.004 0.004 0.004 0.004 0.005 0.003 0.006 0.003 0.004 0.005 0.006 0.005 0.004 0.004 0.003 0.003 0.004 0.003 0.005 0.003 0.005 0.004 0.003 0.004 0.003 0.006 0.004 0.004 0.003 0.003 0.003 0.006 0.004 0.005 0.003 ID mm 117.07 117.60 118.47 118.92 120.65 123.83 125.10 125.22 126.59 127.76 128.45 133.00 133.32 133.73 135.64 137.52 138.28 138.81 139.07 139.37 139.70 141.05 142.34 142.65 146.05 147.04 147.70 149.40 151.59 152.02 152.98 161.29 161.57 164.64 165.61 Tol. ± mm 0.84 0.84 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 Width mm 3.81 3.53 3.10 3.56 4.78 1.52 6.60 2.62 3.73 5.33 5.92 5.44 3.12 3.53 1.78 2.62 3.15 1.78 4.17 1.57 4.27 3.05 1.78 3.23 1.78 6.40 3.56 2.79 1.78 1.78 2.62 6.99 2.74 4.32 1.78 Tol. ± mm 0.10 0.10 0.10 0.10 0.13 0.08 0.15 0.08 0.10 0.13 0.15 0.13 0.10 0.10 0.08 0.08 0.10 0.08 0.13 0.08 0.13 0.10 0.08 0.10 0.08 0.15 0.10 0.10 0.08 0.08 0.08 0.15 0.10 0.13 0.08

Parker Hannifin Corporation · O-Ring Division

54

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-869 5-434 5-696 5-691 5-873 5-975 5-875 5-438 5-439 5-876 5-877 5-442 5-445 5-880 5-575 5-450 5-882 5-635 5-883 5-884 5-885 5-886 5-457 5-458 5-887 5-165 5-889 5-976 5-890 5-623 5-464 5-891 5-466 5-469 5-471 ID in. 6.609 7.108 7.110 7.139 7.230 7.425 7.580 7.613 7.640 7.674 7.802 8.015 8.277 8.350 8.875 9.071 9.162 9.370 9.820 9.984 10.171 10.178 10.232 10.340 10.343 10.359 10.372 10.425 10.606 10.630 10.656 10.734 10.749 10.883 10.995 Tol. ± in. 0.045 0.045 0.045 0.045 0.045 0.045 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.055 0.055 0.055 0.055 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 Width in. 0.139 0.275 0.103 0.072 0.070 0.260 0.210 0.070 0.125 0.210 0.104 0.187 0.275 0.275 0.070 0.062 0.210 0.103 0.103 0.070 0.139 0.112 0.139 0.139 0.275 0.139 0.104 0.260 0.103 0.139 0.070 0.139 0.210 0.103 0.149 Tol. ± in. 0.004 0.006 0.003 0.003 0.003 0.006 0.005 0.003 0.004 0.005 0.003 0.005 0.006 0.006 0.003 0.003 0.005 0.003 0.003 0.003 0.004 0.004 0.004 0.004 0.006 0.004 0.003 0.006 0.003 0.004 0.003 0.004 0.005 0.003 0.004 ID mm 167.87 180.54 180.59 181.33 183.64 188.60 192.53 193.37 194.06 194.92 198.17 203.58 210.24 212.09 225.42 230.40 232.72 238.00 249.43 253.59 258.34 258.52 259.89 262.64 262.71 263.12 263.45 264.80 269.39 270.00 270.66 272.64 273.03 276.43 279.27 Tol. ± mm 1.14 1.14 1.14 1.14 1.14 1.14 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.40 1.40 1.40 1.40 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 1.52 Width mm 3.53 6.99 2.62 1.83 1.78 6.60 5.33 1.78 3.18 5.33 2.64 4.75 6.99 6.99 1.78 1.57 5.33 2.62 2.62 1.78 3.53 2.84 3.53 3.53 6.99 3.53 2.64 6.60 2.62 3.53 1.78 3.53 5.33 2.62 3.78 Tol. ± mm 0.10 0.15 0.08 0.08 0.08 0.15 0.13 0.08 0.10 0.13 0.08 0.13 0.15 0.15 0.08 0.08 0.13 0.08 0.08 0.08 0.10 0.10 0.10 0.10 0.15 0.10 0.08 0.15 0.08 0.10 0.08 0.10 0.10 0.08 0.10

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

55

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-894 5-474 5-898 5-476 5-069 5-900 5-480 5-482 5-164 5-901 5-485 5-486 5-902 5-487 5-488 5-569 5-905 5-906 5-907 5-908 5-611 5-619 5-492 5-070 5-910 5-071 5-072 5-493 5-494 5-495 5-496 5-498 5-500 5-912 5-1097 ID in. 10.996 11.331 11.335 11.562 11.750 12.000 12.017 12.109 12.160 12.234 12.260 12.299 12.360 12.380 12.463 12.475 12.623 12.705 12.725 12.840 12.900 12.915 13.248 13.270 13.375 13.410 13.460 13.490 13.541 13.601 13.616 13.650 13.718 13.734 13.750 Tol. ± in. 0.060 0.060 0.060 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 0.070 Width in. 0.103 0.275 0.103 0.275 0.139 0.187 0.285 0.139 0.210 0.139 0.139 0.137 0.210 0.139 0.103 0.139 0.140 0.070 0.275 0.139 0.159 0.139 0.139 0.139 0.210 0.139 0.210 0.139 0.210 0.139 0.141 0.139 0.275 0.139 0.103 Tol. ± in. 0.003 0.006 0.003 0.006 0.004 0.005 0.006 0.004 0.005 0.004 0.004 0.004 0.005 0.004 0.003 0.004 0.004 0.003 0.006 0.004 0.005 0.004 0.004 0.004 0.005 0.004 0.005 0.004 0.005 0.004 0.004 0.004 0.006 0.004 0.003 ID mm 279.30 287.81 287.91 293.67 298.45 304.80 305.23 307.57 308.86 310.74 311.40 312.39 313.94 314.45 316.56 316.87 320.62 322.71 323.22 326.14 327.66 328.04 336.50 337.06 339.73 340.61 341.88 342.65 343.94 345.47 345.85 346.71 348.44 348.84 349.25 Tol. ± mm 1.52 1.52 1.52 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 Width mm 2.62 6.99 2.62 6.99 3.53 4.75 7.24 3.53 5.33 3.53 3.53 3.48 5.33 3.53 2.62 3.53 3.56 1.78 6.99 3.53 4.04 3.53 3.53 3.53 5.33 3.53 5.33 3.53 5.33 3.53 3.58 3.53 6.99 3.53 2.62 Tol. ± mm 0.10 0.15 0.08 0.15 0.10 0.13 0.15 0.10 0.13 0.10 0.10 0.10 0.13 0.10 0.08 0.10 0.10 0.08 0.15 0.10 0.13 0.10 0.10 0.10 0.13 0.10 0.13 0.10 0.13 0.10 0.10 0.10 0.15 0.10 0.08

Parker Hannifin Corporation · O-Ring Division

56

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-073 5-502 5-624 5-074 5-916 5-504 5-626 5-505 5-506 5-507 5-508 5-166 5-920 5-921 5-512 5-076 5-077 5-924 5-925 5-079 5-515 5-516 5-517 5-518 5-571 5-930 5-520 5-522 5-080 5-524 5-622 5-525 5-935 5-526 5-082 ID in. 13.820 14.088 14.111 14.234 14.369 14.430 14.470 14.470 14.570 14.600 14.674 14.722 14.780 14.795 15.171 15.260 15.300 15.410 15.465 15.540 15.548 15.740 15.750 16.031 16.234 16.285 16.435 16.507 16.575 16.640 16.750 16.765 17.100 17.250 17.250 Tol. ± in. 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 Width in. 0.139 0.210 0.139 0.139 0.278 0.139 0.087 0.139 0.141 0.210 0.139 0.139 0.175 0.071 0.139 0.210 0.139 0.210 0.188 0.139 0.210 0.139 0.275 0.256 0.139 0.250 0.139 0.225 0.187 0.210 0.275 0.125 0.275 0.187 0.240 Tol. ± in. 0.004 0.005 0.004 0.004 0.006 0.004 0.003 0.004 0.004 0.005 0.004 0.004 0.005 0.003 0.004 0.005 0.004 0.005 0.005 0.004 0.005 0.004 0.006 0.006 0.004 0.006 0.004 0.006 0.005 0.005 0.006 0.004 0.006 0.005 0.006 ID mm 351.03 357.84 358.42 361.54 364.97 366.52 367.54 367.54 370.08 370.84 372.72 373.94 375.41 375.79 385.34 387.60 388.62 391.41 392.81 394.72 394.92 399.80 400.05 407.19 412.34 413.64 417.45 419.28 421.01 422.66 425.45 425.83 434.34 438.15 438.15 Tol. ± mm 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.03 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 Width mm 3.53 5.33 3.53 3.53 7.06 3.53 2.21 3.53 3.58 5.33 3.53 3.53 4.45 1.80 3.53 5.33 3.53 5.33 4.78 3.53 5.33 3.53 6.99 6.50 3.53 6.35 3.53 5.72 4.75 5.33 6.99 3.18 6.99 4.75 6.10 Tol. ± mm 0.10 0.13 0.10 0.10 0.15 0.10 0.08 0.10 0.10 0.13 0.10 0.10 0.13 0.08 0.10 0.13 0.10 0.13 0.13 0.10 0.13 0.10 0.15 0.15 0.10 0.15 0.10 0.15 0.13 0.13 0.15 0.10 0.15 0.13 0.15

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

57

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-528 5-937 5-529 5-1100 5-939 5-083 5-084 5-533 5-1102 5-085 5-534 5-1104 5-1105 5-943 5-944 5-947 5-540 5-541 5-086 5-948 5-950 5-1019 5-1010 5-088 5-547 5-953 5-089 5-551 5-090 5-552 5-167 5-168 5-169 5-091 5-170 ID in. 17.268 17.390 17.455 17.500 17.870 17.910 18.062 18.169 18.265 18.350 18.405 18.500 18.635 18.870 18.880 19.380 19.437 19.500 19.580 19.725 19.960 20.180 20.609 21.180 21.564 22.360 23.406 23.540 23.576 23.612 23.780 24.875 25.153 25.474 25.500 Tol. ± in. 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.120 0.120 0.120 0.120 0.120 0.120 0.120 0.120 0.120 Width in. 0.242 0.139 0.139 0.139 0.210 0.139 0.281 0.096 0.210 0.210 0.210 0.188 0.139 0.275 0.139 0.139 0.375 0.250 0.210 0.210 0.139 0.125 0.139 0.147 0.139 0.132 0.281 0.139 0.139 0.275 0.375 0.250 0.214 0.139 0.275 Tol. ± in. 0.006 0.004 0.004 0.004 0.005 0.004 0.006 0.003 0.005 0.005 0.005 0.005 0.004 0.006 0.004 0.004 0.007 0.006 0.005 0.005 0.004 0.004 0.004 0.004 0.004 0.004 0.006 0.004 0.004 0.006 0.007 0.006 0.005 0.004 0.006 ID mm 438.61 441.71 443.36 444.50 453.90 454.91 458.77 461.49 463.93 466.09 467.49 469.90 473.33 479.30 479.55 492.25 493.70 495.30 497.33 501.02 506.98 512.57 523.47 537.97 547.73 567.94 594.51 597.92 598.83 599.74 604.01 631.82 638.89 647.04 647.70 Tol. ± mm 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.29 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 Width mm 6.15 3.53 3.53 3.53 5.33 3.53 7.16 2.44 5.33 5.33 5.33 4.78 3.53 6.99 3.53 3.53 9.52 6.35 5.33 5.33 3.53 3.18 3.53 3.73 3.53 3.35 7.14 3.53 3.53 6.99 9.52 6.35 5.44 3.53 6.99 Tol. ± mm 0.15 0.10 0.10 0.10 0.13 0.10 0.15 0.08 0.13 0.13 0.13 0.13 0.10 0.15 0.10 0.10 0.18 0.15 0.13 0.13 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.10 0.10 0.15 0.18 0.15 0.13 0.10 0.15

Parker Hannifin Corporation · O-Ring Division

58

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

5-xxx Sizes

Parker No. 5-171 5-173 5-631 5-172 5-092 5-955 ID in. 26.125 26.188 26.408 27.485 27.625 28.801 Tol. ± in. 0.120 0.120 0.120 0.120 0.120 0.140 Width in. 0.275 0.210 0.139 0.275 0.275 0.275 Tol. ± in. 0.006 0.005 0.004 0.006 0.006 0.006 ID mm 663.58 665.18 670.76 698.12 701.68 731.55 Tol. ± mm 3.05 3.05 3.05 3.05 3.05 3.56 Width mm 6.99 5.33 3.53 6.99 6.99 6.99 Tol. ± mm 0.15 0.13 0.10 0.15 0.15 0.15

SIZING CHARTS

Parker Hannifin Corporation · O-Ring Division

59

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

Parker Series 8-XXX Compounds Sizes

Developed primarily for service in petroleum based hydraulic fluids at -40°C to 121°C (-40°F to 250°F), Parker's standard Parbak N0300-90 and N1444-90 compounds provide the maximum benefits in back-up ring service. Compounds for use in other fluids and for temperatures up to 204°C (400°F) are available on request. Parbaks will stretch up to 50%, and are quickly and easily installed. Advantages of the contour design are obtained regardless of how Parbaks are installed -- they may be installed with the concave face in either direction, toward or away from the O-ring.

T Ref. A A

W R

I.D.

.010 R. Max. Section W-W

Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx andAS568BseriesO-ringwithwhichtheyareused. Completecall-outconsistsofthedigit8,thedashnumberforthe size wanted and the rubber material. Example:N03008-009

Parker Hannifin Corporation · O-Ring Division

60

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes

R ± .010 .087 Tol. Ref. .049 A in. .045 Tol. ± .003 Width in. .053 Tol. ± .003 R ± .010 .087 Tol. Ref. .049

8-XXXSizes SIZING CHARTS

A in. .045 Tol. ± .003 Width in. .053 Tol. ± .003

Parker No. 8-004 8-005 8-006 8-007 8-008 8-009 8-010 8-011 8-012 8-013 8-014 8-015 8-016 8-017 8-018 8-019 8-020 8-021 8-022 8-023 8-024 8-025 8-026 8-027 8-028 8-029 8-030 8-031 8-032 8-033 8-034 8-035 8-036 8-037

ID in. .096 .127 .140 .171 .202 .234 .265 .327 .390 .455 .518 .580 .643 .705 .768 .830 .893 .955 1.018 1.080 1.143 1.205 1.268 1.330 1.393 1.518 1.643 1.768 1.893 2.018 2.143 2.268 2.393 2.518

Tol. ±

.005

.007

Parker No. 8-038 8-039 8-040 8-041 8-042 8-043 8-044 8-045 8-046 8-047 8-048 8-049 8-050

ID in. 2.643 2.768 2.893 3.018 3.268 3.518 3.768 4.018 4.268 4.518 4.768 5.018 5.268

Tol. ± .020

.024 .027 .030 .037

.009

.010

.011

.013 .015

.018

Parker Hannifin Corporation · O-Ring Division

61

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes

R ± .010 .129 Tol. Ref. .053 A in. .045 Tol. ± .003 Width in. .086 Tol. ± .003 R ± .010 .129 Tol. Ref. .053

8-XXXSizes

A in. .045 Tol. ± .003 Width in. .086 Tol. ± .003

Parker No. 8-102 8-103 8-104 8-105 8-106 8-107 8-108 8-109 8-110 8-111 8-112 8-113 8-114 8-115 8-116 8-117 8-118 8-119 8-120 8-121 8-122 8-123 8-124 8-125 8-126 8-127 8-128 8-129 8-130 8-131 8-132 8-133 8-134

ID in. .077 .109 .140 .171 .202 .234 .265 .327 .390 .452 .515 .577 .640 .702 .765 .831 .893 .956 1.018 1.081 1.143 1.206 1.268 1.331 1.393 1.456 1.518 1.581 1.643 1.706 1.768 1.831 1.893

Tol. ±

.005

.007 .009

.010

.012

.015

Parker No. 8-135 8-136 8-137 8-138 8-139 8-140 8-141 8-142 8-143 8-144 8-145 8-146 8-147 8-148 8-149 8-150 8-151 8-152 8-153 8-154 8-155 8-156 8-157 8-158 8-159 8-160 8-161 8-162 8-163 8-164 8-165 8-166 8-167

ID in. 1.956 2.018 2.081 2.143 2.206 2.268 2.331 2.393 2.456 2.518 2.581 2.643 2.706 2.768 2.831 2.893 3.018 3.268 3.518 3.768 4.018 4.268 4.518 4.768 5.018 5.268 5.518 5.768 6.018 6.268 6.518 6.768 7.018

Tol. ±

.017

.020

.022

.024 .028 .030

.035

.040

Parker Hannifin Corporation · O-Ring Division

62

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes SIZING CHARTS

R ± .010 .129 Tol. Ref. .053 A in. .045 Tol. ± .003 Width in. .086 Tol. ± .003

Parker No. 8-168 8-169 8-170 8-171 8-172 8-173 8-174 8-175 8-176 8-177 8-178

ID in. 7.268 7.518 7.768 8.018 8.268 8.518 8.768 9.018 9.238 9.518 9.768

Tol. ± .045

.050

.055

Parker Hannifin Corporation · O-Ring Division

63

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes

R ± .010 .174 Tol. Ref. .050 A in. .040 Tol. ± .003 Width in. .118 Tol. ± .004 R ± .010 .174 Tol. Ref. .050

8-XXXSizes

A in. .040 Tol. ± .003 Width in. .118 Tol. ± .004

Parker No. 8-201 8-202 8-203 8-204 8-205 8-206 8-207 8-208 8-209 8-210 8-211 8-212 8-213 8-214 8-215 8-216 8-217 8-218 8-219 8-220 8-221 8-222 8-223 8-224 8-225 8-226 8-227 8-228 8-229 8-230 8-231

ID in. .202 .265 .327 .390 .455 .518 .580 .643 .705 .766 .828 .891 .953 1.016 1.078 1.141 1.203 1.266 1.334 1.397 1.459 1.522 1.647 1.772 1.897 2.022 2.147 2.272 2.397 2.522 2.631

Tol. ±

.005

.007 .009

.010

.012

.015

.018

.020

Parker No. 8.232 8-233 8-234 8-235 8-236 8-237 8-238 8-239 8-240 8-241 8-242 8-243 8-244 8-245 8-246 8-247 8-248 8-249 8-250 8-251 8-252 8-253 8-254 8-255 8-256 8-257 8-258 8-259 8-260 8-261 8-262

ID in. 2.756 2.881 3.006 3.131 3.256 3.381 3.506 3.631 3.756 3.881 4.006 4.131 4.256 4.381 4.506 4.631 4.768 4.893 5.018 5.143 5.268 5.393 5.518 5.643 5.768 5.893 6.018 6.268 6.518 6.768 7.018

Tol. ±

.024

.028

.030

.035

.040

Parker Hannifin Corporation · O-Ring Division

64

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes SIZING CHARTS

R ± .010 .174 Tol. Ref. .050 A in. .040 Tol. ± .003 Width in. .118 Tol. ± .004

Parker No. 8-263 8-264 8-265 8-266 8-267 8-268 8-269 8-270 8-271 8-272 8-273 8-274 8-275 8-276 8-277 8-278 8-279 8-280 8-281 8-282 8-283 8-284

ID in. 7.268 7.518 7.768 8.018 8.268 8.518 8.768 9.018 9.268 9.518 9.768 10.018 10.518 11.018 11.518 12.018 13.018 14.018 15.018 15.989 16.989 17.989

Tol. ± .045

.050

.055

.065

.075 .080 .085

Parker Hannifin Corporation · O-Ring Division

65

2360 Palumbo Drive, Lexington, KY 40509 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes

R ± .010 .262 Tol. Ref. .076 A in. .060 Tol. ± .004 Width in. .183 Tol. ± .005 R ± .010 .262 Tol. Ref. .076

8-XXXSizes

A in. .060 Tol. ± .004 Width in. .183 Tol. ± .005

Parker No. 8-309 8-310 8-311 8-312 8-313 8-314 8-315 8-316 8-317 8-318 8-319 8-320 8-321 8-322 8-323 8-324 8-325 8-326 8-327 8-328 8-329 8-330 8-331 8-332 8-333 8-334 8-335 8-336 8-337 8-338 8-339 8-340 8-341

ID in. .450 .513 .575 .638 .700 .763 .825 .888 .950 1.013 1.075 1.138 1.200 1.263 1.316 1.388 1.513 1.638 1.763 1.888 2.013 2.138 2.268 2.393 2.518 2.643 2.768 2.893 3.018 3.143 3.273 3.398 3.523

Tol. ± .005 .007 .009

.010

.012

.015

.018

.020

.024

Parker No. 8-342 8-343 8-344 8-345 8-346 8-347 8-348 8-349 8-350 8-351 8-352 8-353 5-354 8-355 8-356 8-357 8-358 8-359 8-360 8-361 8-362 8-363 8-364 8-365 8-366 8-367 8-368 8-369 8-370 8-371 8-372 8-373

ID in. 3.648 3.773 3.989 4.028 4.153 4.278 4.403 4.528 4.653 4.778 4.903 5.028 5.153 5.278 5.403 5.528 5.653 5.778 5.903 6.028 6.278 6.528 6.778 7.028 7.278 7.528 7.778 8.028 8.278 8.528 8.778 9.028

Tol. ±

.028

.030

.037

.040

.045

.050

Parker Hannifin Corporation · O-Ring Division

66

2360 Palumbo Drive, Lexington, KY 40512 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes SIZING CHARTS

R ± .010 .262 Tol. Ref. .076 A in. .060 Tol. ± .004 Width in. .183 Tol. ± .005

Parker No. 8-374 8-375 8-376 8-377 8-378 8-379 8-380 8-381 8-382 8-383 8-384 8-385 8-386 8-387 8-388 8-389 8-390 8-391 8-392 8-393 8-394 8-395

ID in. 9.278 9.528 9.778 10.028 10.528 11.028 11.528 12.028 13.028 14.028 15.028 16.008 17.008 18.008 19.006 20.006 21.006 22.006 22.993 23.993 24.993 25.993

Tol. ± .055

.060 .065 .070 .075 .080 .085 .090 .095 .100 .105 .110 .115 .120

Parker Hannifin Corporation · O-Ring Division

67

2360 Palumbo Drive, Lexington, KY 40512 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

ORD 5712 O-Ring Material Offering Guide

8-XXXSizes

R ± .010 .344 Tol. Ref. .117 A in. .096 Tol. ± .005 Width in. .236 Tol. ± .006 R ± .010 .344 Tol. Ref. .117

8-XXXSizes

A in. .096 Tol. ± .005 Width in. .236 Tol. ± .006

Parker No. 8-425 8-426 8-427 8-428 8-429 8-430 8-431 8-432 8-433 8-434 8-435 8-436 8-437 8-438 8-439 8-440 8-441 8-442 8-443 8-444 8-445 8-446 8-447 8-448 8-449 8-450 8-451 8-452 8-453 8-454 8-455 8-456 8-457 8-458 8-459 8-460

ID in. 4.551 4.676 4.801 4.926 5.051 5.176 5.301 5.426 5.551 5.676 5.801 5.926 6.051 6.274 6.524 6.774 7.024 7.274 7.524 7.774 8.024 8.524 9.024 9.524 10.024 10.524 11.024 11.524 12.024 12.524 13.024 13.524 14.024 14.524 15.024 15.524

Tol. ± .003

.037

.040

Parker No. 8-461 8-462 8-463 8-464 8-465 8-466 8-467 8-468 8-469 8-470 8-471 8-472 8-473 8-474 8-475

ID in. 16.004 16.504 17.004 17.504 18.004 18.504 19.004 19.504 20.004 21.004 22.004 23.004 24.004 25.004 26.004

Tol. ± .075 .080 .085 .090 .095 .100 .105 .110 .115 .120

.045

.055

.060

.070

Parker Hannifin Corporation · O-Ring Division

68

2360 Palumbo Drive, Lexington, KY 40512 Phone: (859) 269-2351 · Fax: (859) 335-5128 www.parkerorings.com

Parker's Total inPHorm

Take the guesswork out of seal design and material selection download a copy of Parker's Total inPHorm software today! Total inPHorm has many enhanced features, including an expanded media compatibility section and custom sizing capabilities that allow the user to design application-specific glands and seals. The software automatically cross-references thousands of part numbers and recommends materials based on the requirements of MIL, SAE and other standards. Total inPHorm takes the seal designer from concept to completion. In addition to the popular O-Ring package, Total inPHorm contains four other standalone packages for hydraulic and pneumatic sealing applications, static face sealing, standard composite seal products and EMI shielding and thermal management. To download your copy of Parker's Total inPHorm, visit www. parkerorings.com.

Your Local Authorized Parker O-Ring Distributor

8/08 5000 TMR

Parker Hannifin Corporation O-Ring Division 2360 Palumbo Drive Lexington, KY 40509 Ph: 859-269-2351 Fax: 859-335-5128

Information

72 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

829906


Notice: fwrite(): send of 204 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531