Read TEX-401D-PEEK.pdf text version

PEEKTM Tubing Products

Products & Custom Solutions

Customer Value Proposition:

Parker TexLoc offers a variety of TEXfluor® PeekTM Tubing Products including large bore tubing, convoluted tubing, small capillary tubing, profiles and rod. Wall thicknesses vary as does the color, from a light amber when produced as a thin wall tube to a dark tan in heavier wall products. PeekTM tubing is offered in a crystalline (not transparent) or amorphous (transparent) state and colors range from a light amber to a dark brown. Common sizes are listed on the next page. PEEKTM tubing is not stocked and is always made to order. For a custom quote, please email [email protected] com.

Contact Information:

Parker Hannifin Corporation Paflex/TexLoc 4700 Lone Star Blvd. Fort Worth, TX 76106 phone 800 423 6551/817 625 5081 fax 800 438 9562/817 624 9095 email: [email protected] www.texloc.com

Product Features:

· · · · ·

High Tensile Strength Maximum Service Temperature (500°F/260°C) USP Class VI Compliant Radiation Resistant Superior Strength to Weight Ratio

· · · · · ·

Excellent Abrasion Resistance Excellent Chemical Resistance Good Electrical Properties Low Ionic Extractables & Outgassing UL 94VO Flammability Rating Low Smoke & Gas Emissions

PEEKTM Attributes

PEEKTM Properties

MECHANICAL PROPERTIES

Properties ASTM Unit PEEKTM

TYPICAL SIZES Sizes Range from .010" up to 2"

PEEKTM Typical Sizes - SmoothboreTubing ID inch .051 + .002 .092 + .003 .165 + .004 .300 + .005 .425 + .005 1.29 2.34 4.19 7.62 10.7 mm + .051 + .076 + .102 + .127 + .127 Wall inch .010 + .002 .015 + .003 .020 + .003 .025 + .004 .025 + .004 mm .254 + .051 .381 + .076 .508 + .076 .635 + .102 .635 + .102

1.30~1.32 20~60 14,065~14,500 24,650 17,110 500,000 580,000~594,500 R126~M99 0.18 1.12~1.38 no break 3.2-3.3 4.50 .003

Specific Gravity Tensile Elongation Tensile Strength Flexural Strength Compressive Strength Tensile Elastic Modulus Flexural Modulus Hardness Durometer Coefficient of Friction Impact Strength IZOD 73°F/23°C

D792 D638 D638 D790 D695 D638 D790 D785 Dynamic ISO180 (<10ft/min) notched ft/lbs/in

unnotched ft/lbs/in

% psi psi 73°F/23°C psi psi

PEEKTM Typical Sizes - Capillary Tubing ID inch .005 + .002 .010 + .002 .015 + .002 .020 + .003 .025 + .003 .127 .254 .381 .508 .762 mm + .051 + .051 + .051 + .076 + .076 OD inch .062 + .003 .062 + .003 .062 + .003 .062 + .004 .062 + .004 mm .157 + .076 .157 + .076 .157 + .076 .157 + .102 .157 + .102

ELECTRICAL PROPERTIES

Dielectric Constant Dissapation Factor Dielectric Strength Volume Resistivity Surface Resistivity Water Absorption, 24h Color D570 D150 D150 D149 D257 .002 in. film KV/ CM-1 ohm-cm ohm/sq 350°F(177°C) 50Hz-10kHz 392°F(200°C) 50Hz-10kHz

190 4.9 x 10

16

PEEKTM Typical Sizes - Monofilament OD size .010 .031 .062 .093 .125 tolerance + .002 + .002 + .003 + .004 + .005 size .254 .787 1.57 2.36 3.18 MM tolerance + .051 + .051 + .076 + .102 + .127

2.0 x 1016 <0.05 Amber/Tan

GENERAL PROPERTIES

%

PEEKTM Applications

-Medical -Nuclear -Analytical Instrumentation -Pharmaceutical -Semiconductor -Chemical Processing -Aerospace -Electronics -Hydrolysis

© 2008 Parker Hannifin Corporation PEEKTM is a registered trademark of Victrex

Bulletin TEX-401D

May 08

Information

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

829903