Read Microsoft Word - Specification Sheet - 4200 Litre Tank.doc text version

Technical Specification Specification Technical

Technical Specification for 4200 Litre Fuel Offshore Tank

Tank Type:

IMDG Type 17, DNV 2.7-1, EN12079 vertical Helifuel tank in rectangular frame 1995 mm x 1995 mm x 2571 mm high 4200 litres +/- 3% ullage 6000 kg 1970 kg 4030kg 0.95 2.67 Bar 4 Bar 0.21 Bar -20ºC to +70ºC 316 Stainless Steel 4.22 mm 4.5 mm mm after forming EN 10219 5275 J2H on primary structure, EN 10025 S355 J263 on padeyes EN 10219 S235 JR on secondary structure ISO corner castings on bottom four corners 316 Stainless Steel (Skirt all 316ss) 026.5 mm hole for 6.5 tonne shackle designed for 45 sling angle) 4-leg IWRC wire rope sling dual-certified to DNV 2.7-1, AS 1666 & APPEA rules Note 1: Not fibre core. (Note: Sling tags required) Note 2 : MPS Slings to be non-dry type 2 off 310mm wide x 112mm deep in 8 mm 304SS 1000mm between centres (Internal dimensions 294 mm wide x 104 mm deep) ASME VIII Div 1. Spot on shell (Ends 1 piece) DNV

Petrozchem Sdn Bhd J-03-02, No.2. Jalan Solaris Solaris Mont'Kiara, 50480 Kuala Lumpur, Malaysia Tel :+603 6411 3419 | Fax +603 6411 3421 E-mail :[email protected] | Web www.petrozchem.com

Frame Dimensions: Capacity: MGW: Tare: Max Payload: Max Specific Gravity: Working Pressure: Test Pressure: External Pressure: Design Temp: Vessel Material: Shell Thickness: Ends Thickness: Frame Material:

Frame to Shell: Padeyes: Slings:

Forklift Pockets:

Vessel Design Code: Radiography: Inspection Agency:

This document is supplied solely for informational purposes and PETROZCHEM makes no guaranteesor warranties, either expressed or implied, with respect to the accuracy and use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale.

Technical Specification Technical Specification

Technical Specification for 4200 Litre Fuel Offshore Tank

Test Requirements: Cargo carried: Apprtoval Details

As per DNV 2.7-1 UN 1863 Helifuel packing groups II and III UN 1223 Kerosene Approval S-5179 Approval ST-3560 Current Drawing TBC

Fitings and Accessories

1 x 460mm -- 6-point fastening penine manhid with TIR provision. Fort Vale part number 710/1200P (c/w FV 620/46050 neckring and includes swing-bolt with split-pin FV 496/9375) 1 x 2 W' Fort Vale Super Maxi Hlghflow pressure vacuum relief valve c/w Vent button and flame gauze, part no O1B/14806. Set pressure: 3.3 bar, Set vacuum: 0.1 bar c/w Pad part no 176/3 150 1 x 1" airline flanged connection with 1" Ball-valve, piped down Left hand side of tank and terminating at chest height with a second 1" Ball-valve, 1" elbow and 1" male camlock coupling & aluminium cap. (Note: secure nuts on support line) 1 x 170 mm 3 point fastening (Fort Vale part number 141/3100125W) 1 x 3" 90 Deg Bottom Outlet Assembly with 105 mm self-sealing dry break coupling (Fort Vale part number 290/5375A) (Attachment point for wire ring: M16 washer attached to inside of bottom frame) 1 x 1.5" foot valve complete extension pipe. %U ball valve, 90 bend and cap (Fort Vale part no 338/2960) Chemical Vapour Vent (Liquip part AW3SST) Flanced to top Dish of Vessel and piped down left hand side of vessel via vapour hose VH3.5, terminating in a Vapour Recovery Adaptor, VCM3-FZ Outlet and dust cap, VCM-DC 2 x Pneumatic connections to Power terminal. Overfill probe (AGP1O2A) flanged from top dish, connected to chemical probe junction box, VOH200-5AT and Piped down side of Vessel to Power terminal Truck Plug (TP1O4), c/w blue cap (P5069) mounted to base of frame on left hand side

1.Manlid

2.Safety Relief Valve

3. Airline Valve

4. Inspection Hatch

5. Bottom Outlet

6. Sample Valve

7.. Vapour Recovery

8. Overfill Protection

9. Power Terminal

This document is supplied solely for informational purposes and PETROZCHEM makes no guaranteesor warranties, either expressed or implied, with respect to the accuracy and use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale.

Petrozchem Sdn Bhd J-03-02, No.2. Jalan Solaris Solaris Mont'Kiara, 50480 Kuala Lumpur, Malaysia Tel :+603 6411 3419 | Fax +603 6411 3421 E-mail :[email protected] | Web www.petrozchem.com

Technical Specification

Technical Specification for 4200 Litre Fuel Offshore Tank

10. Dipstick

Calibrated and marked in 100 litre increments, housed externally in a 304 stainless steel pipe. Manufacturer's tank number to be on every dipstick Tanks to be fitted with dial type level gauge provision, c/w weld in pad and guide rail connection brackets To adequately cover all exposed fittings and thereby prevent slings or chains snagging per DNV 2.7-1. Made from mild steel galvanised grating. Made in 2 halves froni mild steel galvanised grating and designed to lie at 602 in fully opened position. Bottom outlet end, left hand side All welds as laid, Chemically cleaned and passivated. Paint to be applied as per Swire New Coating Procedure OP 012-2 Frames shot blasted to Swedish standard SA 2 Y, roughness 40-75 microns Stripe coat applied to each coat with brush as follows: · Areas with sharp edges, welding seams and inaccessible areas Prime with 1 coat of zinc rich epoxy (Hempadur 17360) to a NDFT of 50 microns · Intermediate coat of fast drying epoxy paint (Hempadur Fast Dry 15560) to a NDFT of 100 microns · Finish with 1 topcoat of two component, isocyanate free, acrylic finishing (Hempel's Pro Acrylic 55880) to a NDFT of 200 microns · Colour: B54800--08 £51 (yellow) Chemically cleaned and passivated; welds as laid. MGW, Payload, Capacity (4200L ÷/-3%), Tare and Tank Serial No. To be supplied and fitted. Jet A-1 stickers to be fitted To code requirements 1 off Earthing boss, 316L Stainless with M16 thread, SMD 024 1 off, in 316 Stainless Steel (230 x 50 mm), welded to frame upright on left Hand side of bottom outlet end, c/w stainless steel dust cap and chain. Mounted 5 down from horizontal Manlid -- Nitrile Rubber P/V valve -- Fortyt (Fortyt is a moulded Teflon with a silicon inner core) Bottom Outlet Foot Valve -- Fortyt Bottom Outlet Ball valve -- PTFE

11. Level Guage (Provision)

12. Walkway / Granting

13. Top Lid 14. Ladder 15. Internal Finish

16. Frame External Finish

17. Tank Enternal Finish 18. Logos / Sign wrintting 19. Name Plates 20. Earthing Point 21. Document Box

22. Gaskets

This document is supplied solely for informational purposes and PETROZCHEM makes no guaranteesor warranties, either expressed or implied, with respect to the accuracy and use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale.

Petrozchem Sdn Bhd J-03-02, No.2. Jalan Solaris Solaris Mont'Kiara, 50480 Kuala Lumpur, Malaysia Tel :+603 6411 3419 | Fax +603 6411 3421 E-mail :[email protected] | Web www.petrozchem.com

Information

Microsoft Word - Specification Sheet - 4200 Litre Tank.doc

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

829627


You might also be interested in

BETA
Microsoft Word - Specification Sheet - 4200 Litre Tank.doc