Read 010_e.pdf text version

Spot weld drill

3 fluted with multilayer alloy Solid tungsten carbide drill STC 8 x 44mm for maximum rigidity sheet metals (Usibor), which are used for example in the cross framework and side members, but partially in the door sills or A and B-columns in models from Daimler/Chrysler, Porsche, VW, Audi, BMW, Volvo, Peugeot and many others. For these extremely hard and tough sheet metals this high-tech drill has been specially developed as 3 fluted and has a completely new "multilayer" coating, with all the advantages of the conventional TiN, TiAIN + TiCN alloys combined. Replacement miller for SPEEDY 8,0 x 44 mm solid tungsten carbide, 3 fluted for ,,Spitznagel Drill" p/n 270 61 05 Replacement miller for SPEEDY 8,0 x 44 mm solid tungsten carbide, 3 fluted for "Vario-Drill" p/n 270 61 10

Stepped drill " Gold "

Long service life because of the titanium nitrite (Tin) coating. The hole diameter is readable by the laser scale in the slot. For the number of revolutions required approximate values for steel/CrNi (VA) are printed in a table in the lid of the steel sheet cartridge. With flat spot for burr free drilling of sheet metals, pipes and profiles up to 4 mm material thickness. Stepped drill size 1 Ø4 - 12 mm, 1 mm ascending p/n 280 24 00 Stepped drill size 1a Ø4 - 20 mm, 2 mm ascending p/n 280 24 50 Stepped drill size 2 Ø 6 - 30 mm, 2 mm ascending p/n 280 25 00 Stepped drill " Gold ", 3 pcs. in steel box p/n 280 28 50 Stepped drill size 3 Ø 9 - 36 mm, 3 mm ascending p/n 280 26 00 Stepped drill size 4 Ø 30 - 40 mm, 1 mm ascending p/n 280 30 40

Hole cutter

Conical special sheet metal drills from HSS for burr-free drilling and reaming. (Steel sheets, stainless steel, V2A, non-ferrous metals, plastics, wood). Also available a special machine cutting paste ZSW for the protection and preservation of the drills performance. Material: Non-ferrous Steel ST 14 / 37 Material thickness Size TITAN 1 TITAN 2 TITAN 3 TITAN 6 TITAN 6 A TITAN 10 Machine cutting paste 0,1-5 mm rpm 2000-1500 1500-800 1000-500 1000-500 1000-500 300-200 0,1-3 mm rpm 800-500 600-300 400-200 400-200 400-200 200-100 high-grade steel stainless steel V2 0,1-1,5 mm rpm 600-400 400-200 200-100 200-100 200-100 80- 50 Plastics

Ø / mm Shank-Ø mm 3-14,5 6 8-20,5 8 16-30,5 9 5-30,5 10 5-30,5 8 29-52,0 12 ZSW

- 10 mm rpm 3000-2000 2000-1500 1500-1000 1500-1000 1500-1000 500-200

p/n 280 00 10 280 00 20 280 00 30 280 00 60 280 11 60 280 01 00 280 20 00

The indicated rpm were determined with test drillings in a controlled environment. They serve only as a non-committal indication of performance.

L 01

Hand tap set 1

M 3 - M 12 DIN 352 HSS Contents: 7 sets of heavy duty hand taps, consisting of 1 pilot a middle and a finishing tap each. Hand tap set 1 in a steel box p/n 230 00 10

Tap and Die set 4

Contents: 7 sets of heavy duty hand taps, consisting of 1 pilot a middle and a finishing tap each, DIN 352, 7 HSS Dies M 3-M12 in equal height, outside diameter 25 x 9 mm. Also: 1 die stock, 1 tap wrench 1 screwdriver Tap and die set 4 p/n 230 00 40

Tap extensions

Hardened universal extensions with inside and outside square as per DIN 10 for hand taps and reamers.

size 2,1 2,4 2,7 3 3,4 3,8 4,3 4,9 5,5 6,2

Metric M1-2,6 M3 M3,5 M4 - 4,5

M5-8 M9-10 M11

P/N 267 02 10 267 02 40 267 02 70 267 03 00 267 03 40 267 03 80 267 04 30 267 04 90 267 05 50 267 06 20

size 7 8 9 10 11 12 13 14,5 16 18

Metric M12 M13-16 M18 M 20 M 22-26 M 27-28 M 30-32

P/N 267 07 00 267 08 00 267 09 00 267 10 00 267 11 00 267 12 00 267 13 00 267 14 50 267 16 00 267 18 00

L 02

HSS-hand taps

HSS heavy duty hand taps (high abrasion resistance) for high cutting velocities, with relief ground profile and precision thread. HSS-hand tap metric DIN 352 Thread-Ø P/N 3 piece sets

Thread-Ø M1 M1,1 M1,2 M1,4 M1,6 M1,7 M1,8 M2 M2,2 M2,3 M2,5 M2,6 M3 M3,5 M4 M4,5 M5 M5,5 M6 M7 M8 M9 M10 M11 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 Speed. / mm 0,25 0,25 0,25 0,3 0,35 0,35 0,35 0,4 0.45 0,4 0,45 0,45 0,5 0,6 0,7 0,75 0,8 0,9 1 1 1,25 1,25 1.5 1,5 1.75 2 2 2,5 2.5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5 P/N. 230 71 00 230 71 10 230 71 20 230 71 40 230 71 60 230 71 70 230 71 80 230 72 00 230 72 20 230 72 30 230 72 50 230 72 60 230 73 00 230 73 50 230 74 00 230 74 50 230 75 00 230 75 50 230 76 00 230 77 00 230 78 00 230 79 00 230 81 00 230 81 10 230 81 20 230 81 40 230 81 60 230 81 80 230 82 00 230 82 20 230 82 40 230 82 70 230 83 00 230 83 30 230 83 60 230 83 90 230 84 20 230 84 50 230 84 80 230 85 20 M8x1 M9x1 M10 x 1 M 11 x 1 M 12 x 1 M 13 x 1 M 14 x 1 M 15 x 1 M 16x 1 M 18x 1 M 20x 1 M 22x 1 M 24 x l M 25 x 1 M 26 x 1 M 27 x 1 M 28 x 1 M 30 x 1 M 10 x 1,25 M 11 x 1,25 M 12 x 1,25 M 14 x 1,25 M 16 x 1,25 M 18 x 1,25 M 20 x 1,25 M 12 x 1,5 M 13 x 1,5 M 14 x 1,5 M 15 x 1,5 M 16 x 1,5 M 18 x 1,5 M 20 x 1,5 M 21 x 1,5 M 22 x 1,5 M 23 x 1,5 M 24 x 1,5 M 25 x 1,5 M 26 x 1,5 M 27 x 1,5 M 28 x 1,5 M 29 x 1.5 M 30 x 1,5 M 32 x 1,5 M 33 x 1,5 M 34 x 1,5 M 35 x 1,5 M 36 x 1,5 M 38 x 1,5 M 39 x 1,5 M 40 x 1,5 M 42 x 1,5 M 45 x 1,5 M 48 x 1,5 M 50 x 1,5 M 52 x 1,5 232 80 80 232 80 90 232 81 00 232 81 10 232 81 20 232 81 30 232 81 40 232 81 50 232 81 60 232 81 80 232 82 00 232 82 20 232 82 40 232 82 50 232 82 60 232 82 70 232 82 80 232 83 00 232 91 00 232 91 10 232 91 20 232 91 40 232 91 60 232 91 80 232 92 00 233 01 20 233 01 30 233 01 40 233 01 50 233 01 60 233 01 80 233 02 00 233 02 10 233 02 20 233 02 30 233 02 40 233 02 50 233 02 60 233 02 70 233 02 80 233 02 90 233 03 00 233 03 20 233 03 30 233 03 40 233 03 50 233 03 60 233 03 80 233 03 90 233 04 00 233 04 20 233 04 50 233 04 80 233 05 00 233 05 20

HSS-hand tap metric fine DIN 2181 2 piece sets

Thread-Ø M 3 x 0,35 M 4 x 0,35 M 4 x 0,5 M 5 x 0,5 M 6 x 0,5 M 8 x 0,5 M 10 x 0,5 M 6 x 0,75 M 7 x 0,75 M 8 x 0,75 M 9 x 0,75 M 1 0 x 0,75 M 12 x 0,75 M 14 x 0,75 P/N 232 50 30 232 50 40 232 60 40 232 60 50 232 60 60 232 60 80 232 61 00 232 70 60 232 70 70 232 70 80 232 70 90 232 71 00 232 71 20 232 71 40

L 03

HSS hand taps metric fine DIN 2181 2 pcs sets Thread-Ø M 18 x 2 M 20 x 2 M 22 x 2 M 24 x 2 M 26 x 2 M 27 x 2 M 28 x 2 M 30 x 2 M 33 x 2 M 36 x 2 M 39 x 2 M 40 x 2 M 42 x 2 M 45 x 2 M 48 x 2 M 50 x 2 M 52 x 2 M 30 x 3 M 36 x 3 M 39 x 3 M 40 x 3 M 42 x 3 M 45 x 3 M 48 x 3 M 50 x 3 M 52 x 3

P/N 233 11 80 233 12 00 233 12 20 233 12 40 233 12 60 233 12 70 233 12 80 233 13 00 233 13 30 233 13 60 233 13 90 233 14 00 233 14 20 233 14 50 233 14 80 233 15 00 233 15 20 233 23 00 233 23 60 233 23 90 233 24 00 233 24 20 233 24 50 233 24 80 233 25 00 233 25 20

Hand taps HSS DIN 351 American coarse thread ­ sets 3 pcs. Thread-Ø threads per inch NC 1/4 NC 5/16 NC 3/8 NC 7/16 NC 1/2 NC 9/16 NC 5/8 NC 3/4 NC 7/8 NC 1 NC 1 1/8 NC1 1/4 NC 1 3/8 NC1 1/2 20 18 16 14 13 12 11 10 9 8 7 7 6 6

P/N 234 30 10 234 30 20 234 30 30 234 30 40 234 30 50 234 30 60 234 30 70 234 30 80 234 30 90 234 31 00 234 31 10 234 31 20 234 31 30 234 31 40

HSS hand taps DIN 351 American fine pitch thread NF ­ sets 3 pcs. Thread-Ø threads per inch NF 1/4 NF 5/16 NF 3/8 NF 7/16 NF 1/2 NF 9/16 NF 5/8 NF 3/4 NF 7/8 NF 1 NF 1 NF 1 1/8 NF 1 1/4 NF 1 3/8 NF 1 1/2 28 24 24 20 20 18 18 16 14 12 14 12 12 12 12

P/N 235 30 10 235 30 20 235 30 30 235 30 40 235 30 50 235 30 60 235 30 70 235 30 80 235 30 90 235 31 00 235 31 10 235 31 20 235 31 30 235 31 40 235 31 50

Thread-Ø M3 M4 M5 M6 M7 M8 M 10

Standard version P/N 242 30 30 242 30 40 242 30 50 242 30 60 242 30 70 242 30 80 242 31 00

Machine tap DIN 352 HSS short machine taps for metric thread or metric ISO thread DIN 13 AZ version with Standard interrupted thread version P/N Thread-Ø P/N 242 00 30 M 12 242 31 20 242 00 40 M 14 242 31 40 242 00 50 M 16 242 31 60 242 00 60 M 18 242 31 80 242 00 70 M 20 242 32 00 242 00 80 M 22 242 32 20 242 01 00 M 24 242 32 40

AZ version with interrupted thread P/N 242 01 20 242 01 40 242 01 60 242 01 80 242 02 00 242 02 20 242 02 40

L 04

Tap wrench

Adjustable tap wrench with hardened steel jaws as per DIN 1814 with unscrewable arms. size 0 1 1½ 2 3 Metric M1-8 M 1- 10 M 3 ­ 12 M 4 ­ 22 M 5 -20 P/N 267 50 00 267 51 00 267 51 50 267 52 00 267 53 00 size 4 5 6 7 Metric M 10 ­ 27 M 14 ­ 33 M 18 ­ 42 M 27 ­ 52 P/N 267 54 00 267 55 00 267 56 00 267 57 00

Tap ball wrench

With unscrewable arms and fixed square holes. Size 0 1 2 3 4 5 6 Square 2,1 - 2,7- 3.0 - 3,4 3.0 - 3,4 - 4,3 - 4,9 3,4 - 4,3 - 4,9 - 5,5 4,9 - 5,5 - 6,2 - 7.0 5,5 - 6,2 - 7.0 - 9.0 7.0 ­ 9.0 - 11 - 12 11 - 12 -14,5 ­ 6.0 Metric /fine M 1 - 4,5 M 3,5 - 8 M 4 - 10 M 5 - 12 M 9 - 16 M 12 - 20 M 18 - 27 P/N 266 00 00 266 00 10 266 00 20 266 00 30 266 00 40 266 00 50 266 00 60

Tap tool holder.

For the admission of thread taps with ratchet and hardened steel chuck. Size 1 2 3 4 Metric M 3 - M 10 M 5 - M 12 M 3 - M 10 M 5 - M 12 Length 80 mm 97 mm 250 mm 300 mm P/N 268 00 10 268 00 20 268 10 10 268 10 20

Die stock

Die stock as per DIN 225 for the direct admission of round dies, DIN 223 Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Inside-Ø x height mm 16 x 5 20 x 5 20 x 7 25 x 9 30 x 11 38 x 10 38 x 14 45 x 14 45 x 18 55 x 16 55 x 22 65 x 18 65 x 25 75 x 20 75 x 30 90 x 22 Metric M 1 - 2,6 M3­4 M 4,5 - 6 M7-9 M 10 - 11 M 12 - 14 M 12 - 14 M 15 - 20 M 16 - 20 M 22 - 24 M 22 - 24 M 25 - 36 M 27 - 36 M 38 - 42 M 39 - 42 M 45 - 52 P/N 265 00 10 265 00 20 265 00 30 265 00 40 265 00 50 265 00 60 265 00 70 265 00 80 265 00 90 265 01 00 265 01 10 265 01 20 265 01 30 265 01 40 265 01 50 265 01 60

L 05

Die stock.

For round dies, DIN 223. To be used in the tightest areas. Manipulation by ratchet and socket or by the enclosed box spanner (female hexagon 24mm and external hexagon 30mm)

M 3 - 6* 7 - 8* 9 - 10* 11 - 14* 18 - 20 22 - 24

admission Ø 20 Ø 25 Ø 30 Ø 38 Ø 45 Ø 55

external hexagon 24 24 24 41 41 41

female hexagon

P/N 265 50 10 265 50 20 265 50 30 265 50 40 265 50 50 265 50 60

30 30 30

Grip for die stock Die stock set 7 pcs. Die stock set 5 pcs. *

p/n 265 55 00 p/n 265 60 00 p/n 265 65 00

Thread restorer file

Universal thread restorer file for interior and external threads Thread restorer file Durospan GF (metric-ISO) p/n 306 00 10

Thread repair and cleaning set

M12x1,25 / M12x1,50 / M 14x1,50 An ideal set arrangement for cleaning and re-cutting the threads of wheel hubs, wheel bolts, stay bolts and wheel nuts. Salt, corrosion, rust, contamination or diagonal setting risks the danger of damage to the threads and can produce the wrong torques when tightening. With this universal cleaning and repair set these problems can be repaired and/or avoided. Thread repair and cleaning set p/n 232 20 10

L 06

HSS dies round DIN 223 for metric thread or metric ISO Fine thread DIN 13

Thread M1 M 1,1 M 1,2 M1,4 M1.6 M1.7 M1,8 M2 M2,2 M2.3 M2,5 M2,6 M3 M3,5 M4 M4,5 M5 M5,5 M6 M7 M8 M9 M10 M11 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M 36 M 39 M 42 M 45 M 48 M 52 Pitch mm 0.25 025 0.25 0,3 0.35 035 0.35 0,4 0,45 0.4 0.45 0.45 0,5 0.6 0,7 0.75 0,8 0,9 1 1 1.25 1.25 1,5 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5 Outside Ø 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 25 25 25 30 30 38 38 45 45 45 55 55 65 65 65 65 75 75 90 90 90 P/N 2500100 2500110 2500120 2500140 2500160 2500170 2500180 2500200 2500220 2500230 2500250 2500260 2500300 2500350 2500400 2500450 2500500 2500550 2500600 2500700 2500800 2500900 2501000 2501100 2501200 2501400 2501600 2501800 2502000 2502200 2502400 2502700 2503000 2503300 2503600 2503900 2504200 2504500 2504800 2505200

HSS-Dies Hexagon DIN 382

MM 19 mm 19 mm 19 mm 19 mm 19 mm 19 mm 19 mm 22 mm 22 mm 22 mm 27 mm 27 mm 36 mm 36 mm 41 mm 41 mm 41 mm 50 mm 50 mm 60 mm 60 mm 60 mm 60 mm 70 mm 70 mm 85 mm 85 mm 85 mm P/N 2600300 2600350 2600400 2600450 2600500 2600550 2600600 2600700 2600800 2600900 2601000 2601100 2601200 2601400 2601600 2601800 2602000 2602200 2602400 2602700 2603000 2603300 2603600 2603900 2604200 2604500 2604800 2605200 Thread

HSS dies round DIN 223 for metric thread or metric ISO fine thread DIN 13

Outside Ø 20 20 20 20 20 25 30 20 25 25 25 30 38 38 25 25 30 30 38 38 38 45 45 45 45 55 55 65 65 65 65 65 30 30 38 38 45 45 45 38 38 38 38 45 45 45 45 55 55 55 55 65 65 65 65 65 65 65 65 65 65 65 75 75 75 75 90 90 90 90 45 45 55 55 65 65 65 65 65 65 75 75 75 90 90 90 Height mm 5 5 5 7 7 9 11 7 9 9 9 11 10 10 9 9 11 11 10 10 10 14 14 14 14 16 16 18 18 18 18 18 11 11 10 10 14 14 14 10 10 10 10 14 14 14 14 16 16 16 16 18 18 18 18 18 15 18 18 18 18 18 20 20 20 20 22 22 22 22 14 14 16 16 18 18 18 18 18 18 20 20 20 22 22 22 P/N 2510030 2510040 2511040 2511050 2511060 2511080 2511100 2512060 2512070 2512080 2512090 2512100 2512120 2512140 2513080 2513090 2513100 2513110 2513120 2513130 2513140 2513150 2513160 2513180 2513200 2513220 2513240 2513250 2513260 2513270 2513280 2513300 2514100 2514110 2514120 2514140 2514160 2514180 2514200 2515080 2515120 2515130 2515140 2515150 2515160 2515180 2515200 2515210 2515220 2515230 2515240 2515250 2515260 2515270 2515280 2515290 2515300 2515320 2515330 2515340 2515350 2515360 2515380 2515390 2515400 2515420 2515450 2515480 2515500 2515520 2516180 2516200 2516220 2516240 2516260 2516270 2516280 2516300 2516330 2516360 2516390 2516400 2516420 2516450 2516480 2516500 M 3 x 0,5 M 4 x 0,35 M 4 x 0,5 M 5 x 0,5 M 6 x 0,5 M 8 x 0,5 M 10 x 0,5 M 6 x 0,75 M 7 x 0,75 M 8 x 0,75 M 9 x 0,75 M 10 x 0,75 M 12 x 0,75 M 14 x 0,75 M8xl M9x1 M 10 x 1 M 11 x l M 12 x 1 M 13 x 1 M 14 x 1 M 15x 1 M 16 x 1 M 18 x 1 M 20 x 1 M 22 x 1 M 24x1 M 25x 1 M 26x 1 M 27 x 1 M 28 x 1 M 30 x 1 M 10 x 1,25 M 11 x 1,25 M 12 x 1,25 M 14 x 1,25 M 16 x 1,25 M 18 x 1,25 M 20 x 1,25 M 8 x 1,5 M 12 x 1,5 M 13 x 1,5 M 14 x 1,5 M 1 5 x 1,5 M 16 x 1,5 M 18x 1,5 M 20x 1,5 M 21 x 1,5 M 22 x 1,5 M 23 x 1,5 M 24 x 1,5 M 25 x 1,5 M 26 x 1,5 M 27 x 1,5 M 28 x 1,5 M 29 x 1,5 M 30 x 1,5 M 32 x 1,5 M 33 x 1,5 M 34 x 1,5 M 35 x 1,5 M 36 x 1,5 M 38 x 1,5 M 39 x 1,5 M 40 x 1,5 M 42 x 1,5 M 45 x 1,5 M 48 x 1,5 M 50 x 1,5 M 52 x 1,5 M 18 x 2 M 20 x 2 M 22 x 2 M 24 x 2 M 26 x 2 M 27 x 2 M 28 x 2 M 30 x 2 M 33 x 2 M 36 x 2 M 39 x 2 M 40 x 2 M 42 x 2 M 45 x 2 M 48 x 2 M 50 x 2

HSS-Dies Hexagon DIN 382 MM

19 mm 19 mm 19 mm 19mm P/N 2610030 2610040 2611040 2611050 2611060 2611080 2612080 2612090 2612100 2612110 2612120 2613120 2613140 2613160 2613180 2613200 2613220 2613240 2613260 2613270 2613280 2613300 2613320 2613330 2613350 2613360 2613380 2613400 2613420 2613450 2613480 2613500 2613520 2614180 2614200 2614220 2614240 2614270 2614300 2614330 2614360 2614390 2614400 2614420 2614450 2614480 2614500

19 mm 22 mm 22 mm 22 mm 27 mm 27 mm 36 mm 36 mm 36 mm 41 mm 41 mm 41 mm 50 mm 50 mm 60 mm 60 mm 60 mm 60 mm 60 mm 60 mm 60 mm 60 mm 70 mm 70 mm 70 mm 85 mm 85 mm 85 mm 85 mm 41 mm 41 mm 50 mm 50 mm 60 mm 60 mm 60 mm 60 mm 70 mm 70 mm 70 mm 85 mm 85 mm 85 mm

HSS dies round for American coarse thread NC

Thread inch-Ø NC 1/4 NC 5/16 NC 3/8 NC 7/16 NC 1/2 NC 9/16 NC 5/8 NC 3/4 NC 7/8 NC 1 NC 1 1/8 NC 1 1/4 NC 1 3/8 NC 1 1/2 threads per inch 20 18 16 14 13 12 11 10 9 8 7 7 6 6 Outside Ø mm 20 25 30 30 38 38 45 45 55 55 65 65 65 75 Height mm 7 9 11 11 14 14 18 18 22 22 25 25 25 30 P/N 2520010 2520020 2520030 2520040 2520050 2520060 2520070 2520080 2520090 2520100 2520110 2520120 2520130 2520140

HSS dies round for American fine pitch thread NF

Thread inch-Ø NF 1/4 NF 5/16 NF 3/8 NF 7/16 NF 1/2 NF 9/16 NF 5/8 NF 3/4 NF 7/8 28 24 24 20 20 18 18 16 14 Outside Ø mm 20 25 30 30 38 38 45 45 55 Height mm 7 9 11 11 10 10 14 14 16 P/N 2530010 2530020 2530030 2530040 2530050 2530060 2530070 2530080 2530090

L 07

Glow plug thread repair kits

For repairing damaged or for renewing destroyed glow plug threads. When the thread is only slightly damaged the thread is re cut with the finishing tap. Using the reamer the destroyed thread is removed and the drilling for cutting the thread is prepared. The threaded bush is placed last using the turner. Repair kits

Reamer Tap Finishing tap Threaded bush setting tool M 8 x 1,0 x 11 mm 6 pcs. M10 x 1,0 x 10 mm 6 pcs. M10 x 1,0 x 19 mm 6 pcs. M10 x 1,25 x 17 mm 6 pcs. M12 x 1,25 x 12,7 mm 8 pcs. 6042100 M 8 x 1,0 6042101 6042102 6042103 6042104 6044085 6044090 6044095 6044125 6041980 6041700 M10x1x10 6041701 6041702 6041703 6041704 6041710 M10x1x19 6041701 6041702 6041703 6041704 6041500 M10x1,25 6041501 6041502 6041503 6041504 6041900 M12 x 1,25 6041960 6041950

Thread repair kits

For repairing or renewing destroyed threads. Using the special drill (3 fluted, titanium-nitrated) the destroyed thread is removed and the drilling for using the threaded bush is introduced. Using the bush setter the cutting threaded bush is then placed. Contents Special drill (3 fluted, titanium-nitrated) 10 cutting threaded bushes Bush setter Special drill 6mm for M4 10 cutting threaded bushes M4 Bush setter for M4 Thread repair kit M4 Special drill for M 5 10 cutting threaded bushes M5 Bush setter for M5 Thread repair kit M5 Special drill 9mm for M6 10 cutting threaded bushes M6 Bush setter for M6 Thread repair kit M6 Special drill 11mm for M8 10 cutting threaded bushes M8 Bush setter for M8 Thread repair kit M8 p/n 930 09 00 p/n 930 03 40 p/n 930 05 40 p/n 930 00 40 p/n 930 09 10 p/n 930 03 50 p/n 930 05 50 p/n 930 00 50 p/n 930 09 20 p/n 930 03 60 p/n 930 05 60 p/n 930 00 60 p/n 930 09 30 p/n 930 03 80 p/n 930 05 80 p/n 930 00 80

L 08

Special drill 13mm for M10 10 cutting threaded bushes M10 Bush setter for M10 Thread repair kit M10 10 cutting threaded bushes M M10x1,25 Bush setter for M M10x1,25 Thread repair kit M M10x1,25 Special drill 15mm for M12 10 cutting threaded bushes M12 Bush setter for M12 Thread repair kit M12 10 cutting threaded bushes M12x1,5 Bush setter for M12x1,5 Thread repair kit M12x1,5 Special drill 17mm for M14 10 cutting threaded bushes M14 Bush setter for M14 Thread repair kit M14 10 cutting threaded bushes M14x1,25 Bush setter for M14x1,25 Thread repair kit M14x1,25 10 cutting threaded bushes M14x1,5 Bush setter for M14x1,5 Thread repair kit M14x1,5 Special drill 19 mm for M16 10 cutting threaded bushes M16 Bush setter for M16 Thread repair kit M16 10 cutting threaded bushes M16x1,5 Bush setter for M16x1,5 Thread repair kit M16x1,5

p/n 930 09 40 p/n 930 04 00 p/n 930 06 00 p/n 930 01 00 p/n 930 04 70 p/n 930 06 70 p/n 930 02 00 p/n 930 09 50 p/n 930 04 20 p/n 930 06 20 p/n 930 01 20 p/n 930 04 80 p/n 930 06 80 p/n 930 02 20 p/n 930 09 60 p/n 930 04 40 p/n 930 06 40 p/n 930 01 40 p/n 930 04 90 p/n 930 06 90 p/n 930 02 40 p/n 930 05 00 p/n 930 07 00 p/n 930 02 50 p/n 930 09 70 p/n 930 04 60 p/n 930 06 60 p/n 930 01 60 p/n 930 05 10 p/n 930 07 10 p/n 930 01 70

Hard metal milling cutters

One piece polished, for the machining of welding seams, spot and MIG welds, hardened steel, castings etc. (for use in the pneumatic axial grinder) shank diameter 6 mm. Spherical shape 10 mm Ø Spherical shape 12 mm Ø Drip shape 10 x 16 mm Flame shape 8 x 20 mm Cylindrical shape 10 mm Hard metal milling cutters set 5 pcs p/n 670 01 00 p/n 670 01 20 p/n 670 21 00 p/n 670 10 80 p/n 670 31 00 p/n 670 50 00

L 09

Hacksaw and saw blades

Hacksaw for all commercially available saw blades In fully flexible HSS and HSSE quality for the rational sawing of hard, high alloy and stainless steel.

Hacksaw S without blades p/n 307 17 00 Blueflex HSS hand saw blade teeth 18 p/n 307 01 80 Blueflex HSS hand saw blade teeth18 double sided p/n 307 05 00 Blueflex HSS hand saw blade teeth 24 p/n 307 02 40 Blueflex HSS hand saw blade teeth 24 double sided p/n 307 05 10 Blueflex HSS hand saw blade teeth 32 p/n 307 03 20 Redflex HSSE hand saw blade teeth 18 p/n 307 11 80 Redflex HSSE hand saw blade teeth 24 p/n 307 12 40 Redflex HSSE hand saw blade teeth 32 p/n 307 13 20

Plaque scraper

For removing plaque. Plaque scraper p/n 311 20 00

Plastic chisel and scraper set

With 100 spare blades The plastic chisel is particularly well suited to removing the stuck on weights from aluminium rims or for the disassembly of adhesive trim and the like. The scraper is only good as long as it is sharp, therefore we include in this set 100 spare blades. Also the handle is flexible therefore easy to modify depending upon the required application. Plastic chisel and scraper set p/n 311 10 05

Pipe cutter

Pipe cutter for copper, brass, aluminium and thin-walled steel tubes Pipe cutter T 03 Cutting range 3-16 mm = 1/8"- 5/8" Length: 50 mm. for close radii Pipe cutter T 03

p/n 312 10 400

L 10

Information

L

10 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1269182