Read cutter.pdf text version

800-375-3787 405-272-0272 405-232-3053(Fax) [email protected] www.ppsokc.com

Open: Monday Thru Friday 8:00 A.M. - 5:00 P.M. C.S.T. Closed: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving & Christmas Large Inventory New Used Rebuilt Printing Equipment, Replacement Parts, Rollers And Attachments For: AB Dick Multilith Chief Davidson Itek Heidelberg T-51 Ryobi Hamada Baum Martin Yale Profold Kompac Crestline Over 130,000 Items In Stock

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knife Bolts

B41 Seybold Knife Bolt Bolts For Seybold CG And Most Older Seybolds. This Square Headed Knife Bolt Is Fitted With An Integral Washer. The Washer Rotates On The Bolt But Is Not Removable. This Bolt Has 1/2"-12 Threads And Measures 25/32" Long Below The Washer. The Square Head Measures 5/8" Across The Flats. The Steel Washer Is 1/8" Thick And Measures 1-1/8" In Diameter. A Screwdriver Slot Is Provided In The Threaded End To Aid In Removal If The Head Gets Rounded Over From A Worn Wrench Or Socket. (This Is The Same Bolt As Our B42 Bolt, Except That It Has A Different Thread Pitch.) B42 Seybold Knife Bolt Bolts For Very Early Seybold Cutters. It Is The Same As Our Part Number B41 Except It Has A 1/2-13 Thread. (Our B41 Bolt Has A 1/2-12 Thread Pitch.) This Square Head Knife Bolt Is Fitted With An Integral Washer. The Washer Rotates On The Bolt But Is Not Removable. This Bolt Measures 25/32" Long Below The Washer. The Square Head Measures 5/8" Across The Flats. The Steel Washer Is 1/8" Thick And Measures 1-1/8" In Diameter. A Screwdriver Slot Is Provided In The Threaded End. B43 Seybold & Oswego Knife Bolt Hex Head Knife Bolts With Integral Washer. This Bolt Has A 1/2"-12 Thread And Measures 3/4" Long Below The Washer. The Hex Head Is 11/16" Across The Flats. The Washer Is 1/8" Thick With A 1-3/16" Diameter. It Is Made From One Piece Of Steel, Including The Washer, And It Includes A Screwdriver Slot In The Tip And Has A Black Oxide Finish For Corrosion Resistance. B48 National, Challenge & Early Seybold Knife Bolt For Challenge 420, National, And Early Seybold Paper Cutters This Steel Hex Head Cap Screw. The 1/2"-12 Thread Is 1-3/32" Long Below The Washer. The Hex Head Is 3/8" High And Measures 3/4" Across The Hex Flats. The Washer Is Captive And Is Not Removable. B56 Chandler & Challenge Knife Bolt This Steel Hex Head Bolt Has A 1/2-12 Thread. It Measures 13/16" Long Below The Washer. The Hex Head Measures 3/4" Across The Flats. The Steel Washer Is Captive, It Rotates But Does Not Come Off. The Steel Washer Is .11" Thick And Measures 1-3/8" In Diameter. B45 Challenge Knife Bolt For Challenge 305, 265, 265h, 265 Titan & 20 Cutters. Socket Head Cap Screw, 1" Long Below The Head, With A 3/8-16 Thread. Supplied Complete With A Heavy Flat Washer. The Washer Is 1" In Diameter And 1/8" Thick. B44 Lawson Knife Bolt Grade 10.9 Steel Socket Head Cap Screw. It Is .70" Long Below The 3/32" Thick Steel Washer. It Has A 1/2"-13 Thread. The 7/8" Diameter Threaded Washer Rotates Freely In A Groove But It Will Not Fall Off The Bolt. B53 Schneider And Perfecta Knife Bolt Hex Head Bolt. M12 X 22mm Long Below The Washer, 1.5mm Thread Pitch. Steel Washer Is 30mm (1-3/16") In Diameter And Is Included With Each Bolt. B511 Pivano Knife Bolts For 40" Pivano Cutters. Socket Head Cap Screw, M12 X 25mm Long Below The Head. 1.75mm Thread Pitch. Also See Our Pivano Knife Bolt Part Number B62 B57 Imperial And Horizon Knife Bolt This Steel Hex Head Bolt Is 11mm ( .43") Long Below The Head. It Has An M10 Thread With A 1.5mm Thread Pitch. The Head Measures 17mm (.67") Across The Flats And Is 5mm (.20") High. Black Oxide Finish For Corrosion Resistance. B60 Wohlenberg Knife Bolt These Alloy Steel Socket Head Blade Bolts Are .70" Long Below The Washer And Have A 1/2-13 Thread. The 4140 Hardened Steel Washer Is Captive On The Head, It Rotates In Place But It Will Not Fall Off. They Are Designed For A Torx Plus Driver. Using The Incorrect Driver Will Eventually Strip The Bolt Head. B61 Wohlenberg Knife Bolt They Are .97" Long Below The Washer And Have A 1/213 Thread. The 4140 Hardened Steel Washer Is Captive On The Head, It Rotates In Place But It Will Not Fall Off. These Alloy Steel Socket Head Blade Bolts Use A Torx Plus Driver. Using The Incorrect Driver Will Eventually Strip The Bolt Head. B63 Wohlenberg Knife Bolt This Bolt Is 25mm (.98") Long Below The Washer And Has An M12 Thread. The Washer Is Captive On The Head, It Rotates In Place But It Will Not Fall Off. Alloy Steel Socket Head Bolts Are Designed For A Torx Plus Driver. Using The Incorrect Driver Will Eventually Strip The Bolt Head. B64 Wohlenberg Knife Bolt This Bolt Is 19mm (.75") Long Below The Washer And Has An M12 Thread. The Washer Is Captive On The Head, It Rotates In Place But It Will Not Fall Off. These Alloy Steel Socket Head Blade Bolts Use A Torx Plus Driver. Using The Incorrect Driver Will Eventually Strip The Bolt Head. B67 Triumph Knife Bolt (9004518) For Triumph No. 46, 48, 4800, 4810 & 4850 Paper Cutters These Special Socket Head Bolts Have A Low Profile Head. They Have An M10 Thread Which Is 13mm (.51") Long Below The Head. The Head Is 16mm In Diameter And Is 6mm Thick. Black Oxide Treatment For Corrosion Resistance B702 Triumph Mbm Knife Screws For MBM Triumph 3600 And MBM Triumph 3610 Paper Cutters. (3600-030) These Custom Made Screws Have A 6mm Diameter Thread. They Are 10mm Long Below The Head. The Slotted Head Is 10mm In Diameter B54 Pivano Knife Bolt This Socket Head Cap Screw Has An M12 Thread, A 1.75mm Thread Pitch, And It Is 30mm (1.18") Long Below The Head. Steel With A Black Oxide Finish. B62 Pivano Knife Bolt Socket Head Cap Screw, M12 X 30mm (1.18") Long Below The Head. 1.5mm Thread Pitch. Black Oxide Finish For Corrosion Resistance. B46 Polar Knife Bolt For Polar 107, 112, 115, 137, 145, 150 & 155 Cutters. Socket Head Cap Screw, M12 X 22mm Long (.87") Below The Head. This Has A Screwdriver Slot Cut In The End As Shown For Ease Of Removal If The Allen Key Socket Gets Stripped. Black Oxide Finish For Corrosion Resistance.

2

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knife Bolts / Shear Pins & Bolts

B704 Polar Knife Bolt For Polar X, XT, E And ED Cutters (409569, 419520). These Zinc Plated, Grade 12.9, Hex Head Cap Screws Have A 12mm Diameter Thread. Included With Each Bolt Is A Heavy 4mm Thick Zinc Plated Washer Made From Heat Treated 4140 Steel. These Bolts Are 24.5mm Long Below The Washer. The Washer Is Threaded To Keep It In Place. B47 Polar Knife Bolt For Polar 80, 82, 90 & 92 Cutters. These Grade 12.9 Socket Head Cap Screws Have An M10 Thread. They Are 16mm Long (.63") Below The Head And Have A Black Oxide Finish For Corrosion Resistance B521 Polar Knife Bolt For Polar 76, 76 EM And Some 72 (28") Cutters (014116, 021053) Socket Head Cap Screw, 10mm Thread By 21mm Long (.83") Below The Washer. It Has A 1" Diameter Washer Which Is 1/4" Thick And Has Been Counter Bored 1/16" Deep To Fit The Head. The Washer Is Held Captive By A Snap Ring. See Our Part Number B522 For A Shorter Version Of This Same Bolt. B522 Polar Knife Bolt For Polar 55, 66, 71 And Some 72 (28") Cutters (014775, 014776, 021054) Socket Head Cap Screw, 10mm Diameter Thread By 17mm Long (.67") Below The Washer. It Has A 1" Diameter Washer Which Is 1/4" Thick And Has Been Counter Bored 1/16" Deep To Fit The Head. The Washer Is Held Captive By A Snap Ring. B66 Polar 92 Knife Bolt For Some Polar 92 Cutters. This Steel, Low Head, Hex Head Bolt Has A 10mm Thread And Measures 20mm (.79") Long Below The Washer. The Heavy Steel Washer Is 1" In Diameter And 1/8" Thick. The Washer Also Has A Beveled Outer Edge. The Washer Rotates In Place But Is Held Captive, It Will Not Fall Off. B705 Prism Knife Bolt This Hex Head Flange Bolt Fits In Prism 116 And Other Prism Cutters. It Has An M12 Thread, It Is 24mm (.98") Long Below The Head, And It Has A 25.4mm (1") Diameter Washer Built Into It. Both The Bolt And The Washer Are Machined Out Of A Single Piece Of 4140 Cold Rolled Steel. The Washer Will Not Rotate. The Oversize Head Measures 19mm (.75") Across. It Has A Screwdriver Slot Machined Into The Tip Of The Threaded End To Help Remove It If The Hex Head Wears Down. It Has A Black Oxide Finish For Corrosion Protection B671 Prism Knife Bolt This Hex Head Bolt Has An M12 Thread And Is 22mm Long Below The Head. It Has A Screwdriver Slot Machined Into The Tip Of The Threaded End To Help Remove It If The Hex Head Strips. B703 Bolt For Sheridan VT Trimmer Grade 8 Steel Hex Head Bolts, 1/2-13 Threads By 1-31/32" Long Below The Washer. The Washer Is An Integral Part Of The Head And Does Not Rotate And Will Not Fall Off. The Washer Is 1-1/16" In Diameter. Black Oxide Finish For Corrosion Resistance. Hex Head Measures 3/4" Across The Flats B65 Knife Bolts For Itoh Paper Cutters Socket Head Bolt, 1/2-12 Thread, 1-1/8" Overall Length Below The Washer. The Captive Washer Is Fixed In Place And Will Not Fall Off. S112 Itoh Robocut And Saber 116 Shear Pin The Main Shank On This Grade 12.9 Steel Socket Head Cap Screw Shear Bolt Is 8mm (.31") In Diameter, Except Where It Is Undercut. It Is 55mm (2.16") Long Below The Head. It Has An M8 Thread. Included With Each Of These Shear Bolts Is A Zinc Plated Flat Washer And A Zinc Plated Elastic Stop Nut. S113 Saber 137 Shear Pin Grade 12.9 Steel Socket Head Cap Screw Shear Bolt. The Main Shank Is 10mm (.39") In Diameter, Except Where It Is Undercut. It Is 55mm (2.16") Long Below The Head. It Has An M10 Thread. Included With Each Bolt Is A Zinc Plated Flat Washer And A Zinc Plated Elastic Stop Nut. S175 Prism 78 & 92 Cutters Shear Bolt (250600832) This Steel Bolt Is A Direct Replacement For The Original. The Main Shank Is 12mm (.47") In Diameter And Is 40mm (1.57") Long Below The Head. It Has An M12 Thread. Included With Each Bolt Is A Elastic Stop Nut And A Washer. The Head Is 28mm (1.11") In Diameter With Two Flats. The Head Is Eccentric To The Shank. S176 Prism 115 Shear Bolt This Steel Shear Pin Or Shear Bolt Is A Direct Replacement For The Original Bolt Supplied By The Factory. The Main Shank Is 14mm (.55") In Diameter And Is 40mm (1.57") Long Below The Head. It Has An M14 Thread. Included With Each Of These Shear Bolts Is A Mating Flange Nut. The Head Is 32mm (1.26") In Diameter With Two Flats. The Head Is Eccentric To The Shank. S94 Lawson Pacemaker III & V Shear Bolt The Main Shank On This Special Socket Head Cap Screw Is 3/8" In Diameter And Is 2-1/2" Long Below The Head. It Has A 3/8-16 Thread. An Elastic Stop Nut Is Also Supplied With Each Of These Shear Bolts. S108 Harris Seybold Shear Pin This 2" Diameter By 4-13/16" Long Steel Shear Pin Fits Many Harris Seybold Paper Cutters. It Is Supplied Complete With The Insulated Center Short Out Pin Assembly. This Trips Out The Machine By Blowing A Fuse When The Pin Breaks During An Overload Condition. This Is To Prevent The Pull Arm From Cycling Once The Shear Pin Brakes Apart. S110 Como Shear Bolt This Steel Shear Pin Measures 80mm (3.15") Long Below The Head And It Has A 10mm Thread. The Head Is 22mm In Diameter (.87") And It Has Two Wrench Flats Machined Into It. The Main Section Of The Shank Is 10mm In Diameter. S201 Wohlenberg 115 Shear Bolt The Main Alloy Steel Shank Is 16mm (.63") In Diameter And Is 50mm (1.97") Long Below The Head. It Has An M16 Thread. The Main Shank Is Cross Drilled For An Exact Breaking Load. Our Bolts Have Been Tensile Tested By An Independent Lab And Broke Within 3% Of The Load Which Is Specified By Wohlenberg. S202 Wohlenberg 137 Shear Bolt The Main Alloy Steel Shank Is 16mm (.63") In Diameter And Is 50mm (1.97") Long Below The Head. It Has An M16 Thread. The Main Shank Is Cross Drilled For An Exact Breaking Load. Our Bolts Have Been Tensile Tested By An Independent Lab And Broke Within 3% Of The Load Which Is Specified By Wohlenberg. 3

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Shear Bolts / Knife Change Handles

S203 Wohlenberg 155 Shear Bolt (7004395) The Main Alloy Steel Shank Is 16mm (.63") In Diameter And Is 50mm (1.97") Long Below The Head. It Has An M16 Thread. The Main Shank Is Cross Drilled For An Exact Breaking Load. Our Bolts Have Been Tensile Tested By An Independent Lab And Broke Within 3% Of The Load Which Is Specified By Wohlenberg. S204 Wohlenberg 180 & 185 Shear Bolt The Main Alloy Steel Shank Is 16mm (.63") In Diameter And Is 50mm (1.97") Long Below The Head. It Has An M16 Thread. The Main Shank Is Cross Drilled For An Exact Breaking Load. Our Bolts Have Been Tensile Tested By An Independent Lab And Broke Within 3% Of The Load Which Is Specified By Wohlenberg S205 Wohlenberg 92G & 86 , Lawson Regent Shear Bolt The Main Thread Is 12mm In Diameter And Measures 45mm Long Below The Head. These Originally Had A Hole Cross Drilled Through The Side Of The Shank. However There Was A Recall On The Original Style Bolt As They Were Too Strong And Would Not Break During An Overload Condition. This Is The Replacement Style. It Has A Black Oxide Finish For Corrosion Protection. S206 Wohlenberg 76 SPM Shear Bolt (9158, 25053) The Main Thread Is 10mm And Measures 45mm Long Below The Head. There Is A Drilled Hole Down The Center Of The Head Into The Shank To Create The Break Point. This Style Replaces The Old Style With The Cross Drilled Hole Through The Side Of The Shank. It Has A Black Oxide Finish For Corrosion Protection. S207 Wohlenberg 92F Shear Bolt The Main Thread Is 10mm In Diameter And Measures 40mm (1.57") Long Below The Head. There Is A Necked Down Notched Area Machined Into The Threaded Part Of The Bolt. This Is Sometimes Refered To As The "Old Style" Shear Bolt For These Machines. It Has A Black Oxide Finish For Corrosion Protection. S109 Standard Horizon Binder Shear Bolt Alloy Steel. This 6mm Diameter Alloy Steel Shear Pin Or Shear Bolt Fits The Standard Horizon Binder. It Is 42mm Long Below The Head. S101 Polar 155 EMC & 155 MON Shear Bolt (260465) Main Shank On This Alloy Steel Shear Bolt Is 3-1/32" Long Below The Head And Has An M20 (.79") Thread. The Head Is 1-15/32" In Diameter And 15/32" Thick. The Head Is Cross Drilled For A Roll Pin Which Is Supplied Already Installed In The Head. Also Included With Each Bolt Is A Mating M20 Washer Faced Hex Nut (Collar Nut). S102 Polar 137 EMC II, 137 MON, 137 X, 137 XT, & 137 ED Shear Bolt (231671, ZA3.423024, 260506) The Main Alloy Steel Shank Has An M16 (.63") Thread And Is 2.33" Long Below The Head. Included With Each Bolt Is A Mating Washer Faced Hex Nut (Collar Nut 231661). The Head Is 1.18" In Diameter And .39" Thick And Has A Flat On One Side As Shown In The Photo. S103 Polar 115 EMC II Shear Bolt (231658) This Alloy Steel Shear Pin Or Shear Bolt Fits The Pull Arm On Polar 115 EMC II Paper Cutters. The Main Shank Has An M16 (.63") Thread And Is 2.33" Long Below The Head. Included With Each Bolt Is A Mating Washer Faced Hex Nut (Collar Nut 231661). The Head Is 1.18" In Diameter And .39" Thick And Has A Flat On One Side As Shown. 4 S104 Polar Most 76, 76 EM, 78, 78 X, & 78 ED Shear Bolt (027920, 017605) The Main Alloy Steel Shank Is 1.84" Long Below The Head. It Has An M12 Thread. Included With Each Bolt Is A Mating Washer Faced Hex Nut (Collar Nut 233166) And A Steel Roll Pin (Already Installed). The Head Measures 22mm (.86") In Diameter By 9.5mm (3/8") Thick. S105 Polar 71 El, 71 CE, 72 EL, 72 CE, 72 CS, & Power Max 28" Shear Bolt (221987, 220329) The Main Alloy Steel Shank Is 1.77" Long Below The Head. It Has An M8 Thread. Included With Each Bolt Is A Mating Washer Faced Hex Nut (Collar Nut 219563). Both The Nut And The Head Measure 12mm (.472") Across The Flats. S106 Polar 80EL Shear Bolt (208943) It Has A "D" Style Head, Round With Two Wrench Flats Machined Into It. The Main Alloy Steel Shank Is 45mm (1.77") Long Below The Head. It Has An M9 Thread. Included With Each Bolt Is A Mating Washer Faced Hex Nut (Collar Nut). S107 Polar 92 EMC II & 92 ED Steel Shear Bolt (260469, 017771, 053063) The Main Shank On This Shear Bolt Or Shear Pin Is 48mm (1.89") Long Below The Head. It Has An M14 Thread. Included With Each Pin Is A Mating Washer Faced Hex Nut (Collar Nut) & A Steel Roll Pin (Already Installed). The Nut Measures 19mm (.75") Across The Flats. S91 Polar 82 EL, 82 CE, 86 EL, 86 CE, 90 EL, 90 CE, 92 EL, 92 EMC & 92 CE Shear Bolt (206016) The Main Shank On This Shear Bolt Measures 9mm (.354") In Diameter, Except Where It Is Undercut. It Is 54mm (2-1/8") Long Below The Head. It Has An M9 Thread And Two Flats Are Cut On The Sides Of The Head. Included With Each Bolt Is A Mating Washer Faced Nut. (Collar Nut Number 205525) S92 Polar 107 El, 107 ST, Polar 112 El, Polar 115 El, Polar 115 CE & Polar 115 EMC Shear Bolt (221719) This Alloy Steel Shear Bolt Is Designed And Engineered To Replace The Original Factory Overload Shear Bolt. The Main Shank Is 12mm (.47") In Diameter, Except Where It Is Undercut. It Is 65mm (2-9/16") Long Below The Head. It Has An M12 X 1mm Thread With A 17mm Hex Head. Included With Each Bolt Is A Mating Hex Nut. S93 Polar 145EL, 150EL, 150CE, Polar 155CE, And 155 EMC (Not 155 EMCII) Steel Shear Bolt (221301) (Serial Numbers 61896 And Higher) The Largest Diameter On The Shank On These Shear Pins Is 14mm (.54"), Except Where It Is Undercut. It Is 80mm (3.15") Long Below The Head. It Has An M14 Thread. A Matching Hex Nut Is Also Supplied With Each Of These Shear Bolts. (Nut Number 205518) H63 Challenge & Baumfolder Knife Change Handle The Solid Steel Knife Handle Is 6" Long And Is Machined From One Solid Piece Of Bar Stock. The Handle Section Is 1" Diameter. The Threaded Section Is 3/8"-16 By 7/8" Long. H64-12 Challenge, Lawson, Seybold Knife Change This Solid Steel Handle Is 6-1/4" Long. The 7/8" Diameter Shank Is Knurled Over Most Of Its Length For A Solid Grip. The Thread On This Handle Is 1/2"-12.

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knife Change Handles & Knobs / Pull Arm / "T" Wrench

H64-13 Challenge, Lawson, Seybold Knife Handle This Solid Steel Handle Is 6-1/4" Long. The 7/8" Diameter Shank Is Knurled Over Most Of Its Length For A Solid Grip. The Thread Is 1/2"-13 On This Handle. H72 Pivano Knife Changing Handle This Steel Handle Is Machined From One Piece Of Cold Rolled Hex Bar Stock. The Threaded End Has A 12mm X 1.5mm Thread. The Overall Length Is 6" And The Hex Handle Is 5/8" Across The Hex. H69 Triumph Knife Changing Handle This Solid Steel Knife Changing Handle Is 5-3/8" Long And Fits Most Triumph Paper Cutters. The 1/2" Diameter Shank Is Knurled Over Most Of Its Length For A Slip Resistant Grip. It Has A Black Oxide Finish For Corrosion Protection. The Thread Is An M10 X 1.5mm Which Is 20mm Long (.79"). The Pointed End Helps With Blade Alignment During Installation. H70 Triumph Knife Changing Handle This Knife Changing Handle Has A 2-5/8" Long Steel Stud. It Has A 10mm X 1.5mm Thread To Fit Most Triumph Paper Cutters. The Fluted Plastic Hand Grip Is 2-5/8" Long. H65 Most Polar 71, 72, 76, 82 & 92 Knife Handle This Solid Steel Handle Is 5" Long. The 1/2" Diameter Shank Is Knurled Over Most Of Its Length For A Slip Resistant Grip. It Has A Black Oxide Finish For Corrosion Protection. The Thread Is An M10 X 1.5mm Which Is 12mm Long (.47"). DFKNIFE Lifter Polar Knife Changing Handle The Solid Steel Knife Handle Is 6" Long And Is Machined From One Solid Piece Of Bar Stock. The Handle Section Is 1" Diameter. The Thread Is An M10 Which Is 7/8" Long. H66 Most Polar 107, 112, 115, 137, & 155 Knife Handle This Solid Steel Handle Is 5" Long. The 1/2" Diameter Shank Is Knurled Over Most Of Its Length For A Slip Resistant Grip. It Has A Zinc Plated Finish For Corrosion Protection. The Thread Is An M12mm Which Is 12mm Long (.47"). H67 Polar 107, 112, 115, 137 & 155 Knife Handle This Solid Heavy Duty Steel Handle Is 7-1/2" Long. The 1" Diameter Shank Is Knurled Over Most Of Its Length For A Better Grip. The Thread Is An M12mm Which Is 14.5mm Long (.57"). This Heavy Blade Change Handle (Weights Almost 1-1/4 Pounds) Is Machined From One Piece Of Solid Steel Bar Stock And Is Zinc Plated For Corrosion Protection. H68 Polar EL Knife Changing Handle This Handle Has A 7/8" Long, M10 Steel Stud. It Has A 1.5mm Thread Pitch. It Is Used For Knife Changing On Most Polar El Models Of Paper Cutters. The Hand Grip Is Made Of Phenolic Plastic And The Disk Is A Semi-Hard Plastic. K10 Lawson Concentric Knife Change Knob This Cast Aluminum Knob Is 2-1/2" In Diameter, Plus The Thickness Of The Rubber O-Ring. It Has A Fixed Threaded Steel Stud. The Steel Stud Has A 1/2"-13 Thread And Is Mounted In The Center Of The Aluminum Knob. K11 Lawson Eccentric Knife Change Knob This Cast Aluminum Knob Is 2-1/2" In Diameter, Plus The Thickness Of The Rubber O-Ring. It Has A Threaded Steel Stud Which Can Be Rotated By Turning The Steel Cross Pin. The Steel Stud Has A 1/2"-13 Thread And Is Mounted Off Center From The Center Of The Aluminum Disc. This Makes It Possible To Rotate The Knob, Once It Has Been Screwed Into Place, So As To Put Light Pressure Against The Blade Before The Blade Is Loosened In The Blade Carrier. K12 Seybold Knife Changing Handle This Cast Aluminum Knob Is 2-1/2" In Diameter. It Has A Fixed Steel Stud With A 3/8"-16 Thread Which Fits Many Models Of Seybold Paper Cutters. K13 Seybold Knife Changing Knob This Cast Aluminum Knob Is 1-7/8" In Diameter. (Similar To Our Part Number K12) It Has A Fixed Steel Stud With A 3/8"-16 Thread. K14 Polar 90EL, 90CE (Later Models), 92CE, 115CE, & 155CE Knife Changing Handle (010113, 206579) This "Insert And Twist" Type Blade Support Handle Has A Solid Nylon Plastic Body With A Plastic Handle. The Steel Shaft Is 10mm (.39") In Diameter With A Fixed Solid Steel 4mm Diameter Pin For Sliding Down The Slot. For Cutters That Require This Twist Type Blade Support For Use During Knife Changes. K15 Polar 72 CE, 76 EM & Power Max 28 Blade Change Support Handle (010755) The 10mm Diameter Pin On This 10" Long Steel Blade Support Handle Is Inserted In A Hole In The Guide On The Right Side Of The Table. The Nose Of The Blade Support Handle Is Then Rotated Up Against The Front Face Of The Blade. This Helps Keep The Blade In Place As The Knife Bolts Are Removed Or Installed. Changing The Blade Without This Blade Support Tool Creates An Unsafe Condition. Knife Bolt "T" Wrench This Welded All Steel "T" Wrench Has A Quality Steel Hex Key Stock Installed In The End Of Its Shaft Or A Quality Steel Socket Welded To The End Of Its Shaft W71 (3/8" Hex) 17" Long W72 (5/16" Hex) 17" Long W76 (5/16" Hex) 24" Long W73 (8mm Hex) 17" Long W74 (10mm Hex) 24" Long W75 (8mm Hex) 21" Long W77 (10mm Hex) 17" Long W78 (5/8" Socket Hex) 16" Long W79 (11/16" Socket) 16" Long GS-344 Polar 72 CE Guide Shaft Pull Arm This 10mm Diameter Alignment Rod Fits Up The Middle Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolts Break. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 6-3/4" Long. GS-345 Polar Power Max 28" Guide Shaft Pull Arm This 10mm Diameter Alignment Rod Fits Up Through The Center Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolts Break. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 63/4" Long. 5

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Pull Arm / Polar Clutch Handles / Misc. Parts

GS-346 Polar 80 El Guide Shaft Pull Arm This 11mm Diameter Alignment Rod Fits Up Through The Center Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolts Break. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 11" Long. GS-347 Polar 82 El Guide Shaft Pull Arm This 11mm Diameter Alignment Rod Fits Up Through The Center Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolts Break. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 11" Long. GS-348 Polar 92 CE Guide Shaft Pull Arm This 11mm Diameter Alignment Rod Fits Up Through The Center Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolts Break. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 11" Long. This Rod Uses A Set Screw For Mounting In The Lower Arm. Some Of The 92CE Cutters Used A Roll Pin, Not A Set Screw. If You Need The Roll Pin Style Use Our Part Number GS-349. GS-349 Polar 92 CE Guide Shaft Pull Arm This 11mm Diameter Alignment Rod Fits Up Through The Center Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolts Break. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 11" Long. This Rod Uses A Roll Pin For Mounting In The Lower Arm. Some Of The 92CE Cutters Used A Set Screw, Not A Roll Pin. If You Need The Set Screw Style Use Our Part Number GS-348. GS-350 Polar 115 CE Guide Shaft Pull Arm This 14mm Diameter Alignment Rod Fits Up The Middle Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolt Breaks. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 15" Long. It Is Used In Pull Arms Which Have A Set Screw For Locking The Bottom Of The Guide Rod In Place. If Your Pull Arm Uses A Roll Pin To Lock The Bottom Of The Guide Rod In Place Use GS-351. GS-351 Polar 115 CE Guide Shaft Pull Arm This 14mm Diameter Alignment Rod Fits Up The Middle Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolt Breaks. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 15" Long. It Is Used In Pull Arms Which Have A Roll Pin For Locking The Bottom Of The Guide Rod In Place. If Your Pull Arm Uses A Set Screw To Lock Bottom Of The Guide Rod Use GS-350. GS-352 Polar 115 EL Guide Shaft Pull Arm This 14mm Diameter Alignment Rod Fits Up The Middle Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolt Breaks. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 15" Long. GS-353 Polar 115 EMC II Guide Shaft Pull Arm This 11mm Diameter Alignment Rod Fits Up The Side Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolt Breaks. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 13" Long. GS-354 Polar 155 CE & 155 El Guide Shaft Pull Arm This 18mm Diameter Alignment Rod Fits Up The Middle Of The Pull Arm To Prevent It From Flapping Around And Causing Damage When The Shear Bolt Breaks. It Is Made From Centerless Ground Drill Rod For Maximum Toughness. Overall Length Is Approximately 15-3/4" Long. Polar Clutch Handles These "T Wrench" Style Clutch Handles Are Made Of 4140 Steel With Precision Cut Metric Threads. They Have A Black Oxide Finish For Corrosion Protection. These Replace The Original Yellow Plastic Style Handle. These Are Normally Used In Pairs But Are Sold Individually. CH1 71 CE, 72 CE & Power Max 28 (013819) 8mm Threads. CH2 76 EM (017490) 8mm Threads. CH3 82 El 8mm Threads. CH4 90 El 8mm Threads. CH5 92 CE, 92 EMC & 92 ED 8mm Threads. CH6 90 El 8mm Threads. CH7 115 El 10mm Threads. CH8 115 CE, 115 ED & 115 XT 10mm Threads. CH9 115 EMC 10mm Threads. CH10 115 MON, 115 El, 150 El, 155 EMC, 155 MON & 155 CE (010231) 10mm Threads. CH11 137 ED, 137 X & 137 XT 10mm Threads. AH Wohlenberg Blade Leveling Handle This Aluminum Handle Replaces The Original Plastic Blade Leveling Handle On Wohlenberg Paper Cutters. It Has An Aluminum Body With A Stainless Steel And Plastic Handle. B3 Torx Plus Bit This Torx Plus Bit Fits B60, B61, B63 And B64 Blade Bolts For Wohlenberg And Other Paper Cutters. It Accepts A Standard 3/8" Square Ratchet Or Socket Extension. Torx And Torx Plus Bits Are Not Designed To Be Interchangeable. While A Torx Bit Will Also Fit These Bolts, It Is A Loose Fit And Will Strip The Bolt Heads. Never Use A Torx Bit In A Torx Plus Bolt. BS10 Blade Stand Blade Stand For Knife Changing On Larger Polar Paper Cutters. (014569) This Cast Aluminum Blade Stand Has A Smooth Nylon Base. It Is Used For Changing The Blade On Larger Polar Paper Cutters, As Well As Some Other Paper Cutters. It Is Normally Used In Pairs And In Conjunction With Our H67 Knife Changing Tool. Sold Individually. CH9 Prism Clutch Handle Prism 115 Clutch Handle. This 4140 Steel Clutch Handle Is Precision Made With Metric Threads. It Has A Black Oxide Finish For Corrosion Protection. It Fits Prism 115 QZK Paper Cutters. These Are Normally Used In Pairs But Are Sold Individually. CAl10 Pressure Control Pedal Polar Pressure Control Handle Or Pressure Set Handle (010028, 010784, 232637). This Pressure Set Handle Or "Foot Pedal" Fits All Polar Models Which Use This Type Of Pressure Adjusting Handle. It Is Made Of Cast Aluminum, Has A 20mm Diameter Through Hole, And Has A Reference Scale Riveted To The Face. It Is A Direct Replacement For The Original Polar Plastic Handle. It Will Not Crack With Age Like The Original Handles.

6

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Miscellaneous Cutter Parts

AJ102 Lawson Seybold Air Jet - Long Body This Brass Air Jet Or Air Nozzle Is Used In Air Tables On Seybold, Lawson, And Other Paper Cutters. It Is 1-7/8" Long X 9/16" Diameter. One End Is Knurled For A Press Fit In A 9/16" Diameter Reamed Hole In The Paper Cutter Table. The Opposite End Has Two Machined Wrench Flats And A 1/8" NPT For The Air Supply. AJ103 Lawson Seybold Air Jet - Short Body This Brass Air Jet Or Air Nozzle Is Used In Air Tables. It Is 1-3/8" Long X 9/16" Diameter. One End Is Knurled For A Press Fit In A 9/16" Diameter Reamed Hole In The Paper Cutter Table. The Opposite End Has Two Machined Wrench Flats And A 1/8" Npt For The Air Supply. BB120 Lawson Bronze Shear Block 2BA2026 This Guide Block Or Shear Block Measures Approx. 2.5" Wide X 4" Long. The Main Cross Hole Measures 1-1/4" In Diameter. It Is Used In Lawson Pacemaker And 52 - 70. BB121 Lawson BronzeShear Block This Guide Block Or Shear Block Measures Approximately 2.5" Wide X 4" Long. The Main Cross Hole Measures 1-1/2" In Diameter. It Is Used In Lawson Cutters 82 Through 110. S96 Seybold Safety Washer These Cast Iron Safety Washers Are Engineered To Break At A Set Overload Condition. They Are 4-9/16" In Diameter And Have A 13/16" Diameter Mounting Hole In The Center Of The Slot. The Slot Is 1" Wide By 7/16" Deep. S97 Seybold Safety Washer These Cast Iron Safety Washers Are Engineered To Break At A Set Overload Condition. They Are 4-9/16" In Diameter And Have A 13/16" Diameter Mounting Hole In The Center Of The Slot. The Slot Is 1" Wide By 7/16" Deep. HB16 Clutch Handle Helper Bar These Are Used To Turn The Clutch Handles When They Are Screwed Into The Flywheel On Polar Cutters. The Holes For The Clutch Handles Are 6-3/8" Apart. Without This Tool You Risk Applying Uneven Pressure To The Clutch Handles Which Can Cause Them To Break Off. HB24 Clutch Handle Helper Bar These Are Used To Turn The Clutch Handles When They Are Screwed Into The Flywheel On Polar Cutters. (207321) The Holes For The Clutch Handles Are 8-1/2" Apart. Without This Tool You Risk Applying Uneven Pressure To The Clutch Handles Which Can Cause Them To Break Off. W10 Polar Blade Leveling Handle (224707) This Malleable Iron Blade Leveling Handle Is Used On Many Models Of Polar Cutters Including The Polar 115 EL. It Is 6 1/2" Long And Has A 14mm Square Hole Which Clamps On The Square Blade Leveling Shaft On The Back Side Of The Cutter AJ501 Air Jet Nozzles For Polar Paper Cutters. These Are 30mm (1.18") Long, Including The Height Of The Protruding Ball. These Air Jets Are Used In Early Polar Guillotine Cutter Air Tables And Air Feed Tables, Jogger Tables, As Well As In Other Industrial Applications For Material Flotation. They Allow For Easy Movement Of Stacks Of Paper Or Card Stock By Allowing The Stock To Float On A Thin Layer Of Air. Once The Stock Clears The Button The Air Jet Closes Off To Prevent Wasting Air. They Are A Press Fit In The 15mm Diameter Reamed Holes In The Table. AJ502 Air Jet Nozzles For Polar Paper Cutters. (010800, 010807) These Air Jets Or Air Nozzles Are Used In Polar Guillotine Cutter Air Tables And Air Feed Tables As Well As In Other Industrial Applications For Material Flotation. They Allow For Easy Movement Of Stacks Of Paper Or Card Stock By Allowing The Stock To Float On A Thin Layer Of Air. Once The Stock Clears The Button The Air Jet Closes Off To Prevent Wasting Air. They Are A Press Fit In The 15mm Diameter Reamed Holes In The Table. They Are 40mm (1.57") Long, Including The Height Of The Protruding Ball. This Style Was Generally Used In Cutters Built After The Mid 1960's. BB101 Sliding Bronze Guide Block For The Knife Carrier In Polar 115 Paper Cutters. This May Also Fit Other Sizes Of Polar Guillotine Paper Cutters. This Guide Block Measures 1.531" X 2.401" X 4 3/4" Long With A 40mm Diameter Reamed Hole. This Block Is Normally Installed On One Side Of The Machine With Our Mating Part Number BB102 Installed On The Other Side Of The Machine. BB102 Sliding Bronze Guide Block For The Knife Carrier In Polar 115 Paper Cutters. This May Also Fit Other Sizes Of Polar Guillotine Paper Cutters. This Block Measures 1.531" X 2.401" X 4" Long With A 40mm Diameter Reamed Hole. This Guide Block Is Normally Installed On One Side Of The Machine With Our Mating Block Part Number BB101 Installed On The Other Side. BB103 Sliding Bronze Guide Block For The Knife Carrier In Polar 92 EMC Paper Cutters. This May Also Fit Other Sizes Of Polar Guillotine Paper Cutters. This Guide Block Measures 1.535" X 2.018" X 3-3/8" Long With A 36mm Diameter Reamed Hole. This Block Is Normally Installed On One Side Of The Machine With Our Mating Part Number BB104 Installed On The Opposite Side Of The Machine. BB104 Sliding Bronze Guide Block For The Knife Carrier In Polar 92 Emc Paper Cutters. This May Also Fit Other Sizes Of Polar Guillotine Paper Cutters. This Block Measures 1.535" X 2.018" X 4" Long With A 36mm Diameter Reamed Hole. This Sliding Guide Block Is Normally Installed On One Side Of The Machine With Our Mating Part Number BB103 Installed On The Opposite Side Of The Machine.

This Is Only A Sample Of Items Available

7

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Miscellaneous Cutter Parts

SW Polar Clamp Pedal Cam Wedge (Single Tapped Hole) (205844) This Nylon Wedge Measures 3/4" X 1" X 27/16" Long. It Has A Molded In Threaded Brass Insert With An M8 Thread. It Mounts On The Clamp Shaft Bracket On The Larger Polar Cutters Made Between Approximately 1968 Through 1982. Also See Part Number SNC SNC Polar 92 To 155 EMC Clamp Pedal Cam Wedge (Three Tapped Holes) This Solid Nylon Wedge Measures 20mm X 47mm X 60mm Long (.79" X 1.85" X 2.36"). It Has Three Molded In Threaded Brass Insert With An M6 Thread. See Part Number SW G325 Polar Hand Fine Pinion Gear (206286) This 15 Tooth Helical Gear Is Used In The Hand Fine Adjustment Mechanism On Most Polar El And Polar Ce Paper Cutters. It Measures 2-3/4" Long By 1-1/4" Diameter At The Large End And It Is Machined From Delrin. Included With Each Gear Is An Ina Needle Bearing Which Is Pre-Installed Inside The Gear. This Gear Mates With Helical Spur Gear Part Number G326. G326 Polar EL & CE Hand Fine Spur Gear (206273). This 55 Tooth Helical Spur Gear Is Used In The Hand Fine Adjustment Mechanism. It Measures 3-3/16" In Diameter Over The Teeth. Its Overall Length Is Approximately 1-3/32" Wide And About 19/32" Wide Across The Face Of The Teeth. It Fits On The 25mm Diameter Shaft And Is Machined From Delrin. This Gear Mates With Pinion Gear Part Number G325. OB Most Polar 82, 86, 90 & 92 Oiler Manifold Block (206276 & 224525) This Cast Aluminum Oiler Manifold Block Is Used On Some CE And Some EL Models. FP10 Polar Foot Pedal (206045) This Steel Foot Pedal Controls The Clamp. It Fits Most Models Of Polar El And CE Cutters. It Measures 20" Long. Once The Pedal Reaches The End Of Its Stroke, The Adjustable Stop Hits Against The Floor. This Prevents Overstressing The Pedal Or The Shaft Inside The Cutter. Without This Adjustable Stop, Repeated Overstressing Will Often Lead To The Original Pedal Breaking Off. G327 Polar Track Change Gear This Gear Was Predominantly Used On Polar 115 CE & 155 CE Cutters Which Were Built During The 1970s. This Gear Is Used In The Mechanism Which Changes The "Track" On The Wide Magnetic Tape On Cutters With The Magnetic Tape Program Storage System. If Your Original Metal And Plastic Gear Has Cracked And Failed Then This Replacement Gear Will Work As A Direct Replacement For The Original Gear. This One Piece, 15 Tooth Gear, Is Accurately Machined From Aluminum. It Will Not Crack With Age Like The Original Ones Eventually Do. 8 This Is Only A Sample Of Items Available FPA25 Anvil For False Clamp Pin Installation This Steel Anvil Tool Is 2" In Diameter By 4" Long. It Weights 3-1/2 Pounds. It Is Used To Position And Hold The False Clamp Pin In Place While The Bottom End Of The Pin Is Peened Over With A Hammer. One End Is Accurately Machined To Fit Over The P10 Pin While The Opposite End Fits Over The P11 Pin. The Ends Of The Anvil Tool Are Steel Stamped For Proper Identification. CSTL Polar Cut Stick Retainer (Left Side) (206224, 206225). These Plastic Blocks Are 5/8" Square X 1 3/8" Long. They Mount On The Side Of The Table Where The Cut Stick Ends. CSTR Polar Cut Stick Retainer (Right Side) (206224, 206225). These Plastic Blocks Are 5/8" Square X 1 3/8" Long. They Mount On The Side Of The Table Where The Cut Stick Ends. SP188 Polar CE V Belt Split Pulley Assembly Long Hub (010280, 010127) This Precision Machined Aluminum Pulley Is A Direct Replacement For The Original Die Cast Pulley Used On The Tapered Output Shaft On The Hydraulic Pump. Included Is Both Pulley Halves, Three Steel Adjusting Shims ( Part# SP182), And The Three Bolts To Hold The Two Halves Together. Each Shim Is .5mm (.020") Thick. The Pulleys Have Threaded Steel Inserts Installed Where The Two Pulley Halves Bolt Together, Similar To The Originals, To Prevent The Threads From Stripping. This Is The "Long Hub" Version Of This Pulley Assy. The Hub Length Measures Approx. 7/8". (See Part Number SP187) SP187 Polar CE V Belt Split Pulley Assembly Short Hub (010280, 010127) This Precision Machined Aluminum Pulley Is A Direct Replacement For The Original Die Cast Pulley Used On The Tapered Output Shaft On The Hydraulic Pump. Included Is Both Pulley Halves, Three Steel Adjusting Shims (Part# SP182), And The Three Bolts To Hold The Two Halves Together. Each Shim Is .5mm (.020") Thick. The Pulleys Have Threaded Steel Inserts Installed Where The Two Pulley Halves Bolt Together, Similar To The Originals, To Prevent The Threads From Stripping. This Is The "Short Hub" Version Of This Pulley Assembly. The Hub Length Measures Approx.1/2". (See Part Number SP188) SP182 Polar CE Split Pulley Shim (206640, 266641) This Laser Cut Steel Shim Is Used Between The Adjustable Pulleys On Hydraulic Pump Output Shafts. These Shims Are Added And Removed To Ensure The Correct Tension Is Maintained On The Belt. They Fit Both The Original The Replacement Pulleys. Each Shim Measures .5mm Thick (.020"). They Are Sold Individually. LA Locking Lever Arm This Locking Lever Arm (205912) Fits On The Locking Valve On Polar CE Model Paper Cutters. It Is Machined From Cast Aluminum.

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Miscellaneous Cutter Parts

P10 False Clamp Pin Steel False Clamp Pin For Polar Paper Cutters. (206035) 47mm (1.85") Long. Notched As Shown. These False Clamp Pins Are Made In The Usa. P11 False Clamp Pin Steel False Clamp Pin For Polar Cutters, 41.5mm (1.63") Long. (232338) Notched As Shown With Flats Cut On Both Sides Of The Large Diameter Area Of The Shank. This Fits On Newer Cutters. CB10 Carbon Brush For Backgauge Reversing Slip Ring Most Polar Cutters Made Before 1968. The Carbon End Measures 4mm Square X 15mm Long. (.16" Square X .59" Long) CB11 Carbon Brush Carbon Brush For Magnetic Clutch For Polar 71 ­ 76 El Cutters Built Before 1968. It Measures 8mm X 20mm X 25mm. (.315" X .787" X .984") CB12 Carbon Brush (210610) This Carbon Brush Fits The Magnetic Clutch On Polar 71ST, 72CE, 76EM, 78E, 78ES, 78ED, POLAR 78X, 78XT & 107ST Cutters. It Measures 6.5mm X 10mm X 15mm. (.256" X .394" X .590") FW1 Polar 115 Flywheel Cover (206663). This Clear Plastic Flywheel Cover Is A Direct Replacement For The Original Cover. It Is 10-1/2" In Diameter With Two Drilled Mounting Holes. FW2 Polar 82, 90 & 92 Flywheel Cover This Clear Plastic Flywheel Cover Is A Direct Replacement For The Original Cover. It Is 8-1/4" In Diameter With Drilled Mounting Holes. When Using This Cover In A Polar 82, Two New Mounting Holes Will Have To Be Drilled In This Cover. FW3 Polar 71 & 72 Flywheel Cover (207751) This Rectangular Clear Plastic Flywheel Cover Is A Direct Replacement For The Original Cover. Its Outside Dimensions Are 7-1/4" X 11" With Two Drilled Mounting Holes. W19 Polar Blade Leveling Handle, For 19mm Square Shaft This Handle Is Used On Many Larger Models Of Polar Paper Cutters, Up To And Including The Polar 155. It Is 9" Long And Has A 19mm Square Hole Which Clamps On The Square Blade Leveling Shaft On The Back Side Of The Cutter. BB115CE Polar 115 CE & 115 EMC Blade Back Up Bars (014179) These Steel Backing Bars Or Knife Spacers Are Mounted In The Blade Carrier So That The Second, Lower Set Of Mounting Holes Can Be Used On The Blade When The Blade Has Been Sharpened Down To Half Of Its Original Size. The Socket Head Cap Screws Are Secured In The Blade Spacers. The 12mm Screws Will Rotate But Will Not Fall Out. The Bars Are 15-3/4" Long And Are Ground On Their Top And Bottom Surfaces For An Exact Fit. Sold In Pairs. This Is Only A Sample Of Items Available BB115EL Polar 112 EL & 115 EL Blade Back Up Bars (207455) These Are Mounted In The Blade Carrier So That The Second, Lower Set Of Mounting Holes Can Be Used On The Blade When The Blade Has Been Sharpened Down To Half Of Its Original Size. The Socket Head Cap Screws Are Secured In The Blade Spacers. The 8mm Screw Will Rotate But Will Not Fall Out. The Bars Are 15-3/4" Long And Are Ground On Their Top And Bottom Surfaces For An Exact Fit. They Are Sold In Pairs. G102 Polar 115 EL, 115 CE (Early Models), 137 & 155 Blade Setting Gauge (013747) This Blade Setting Gauge Is Used To Set The Height Of The Blade During Blade Changes. See Our Part Number G101 For The Gauge Used On Smaller Polar Cutters. G101 Blade Setting Gauge For Polar 82 & 92 (013746) This Blade Setting Gauge Is Used To Set The Height Of The Blade During Blade Changes. See G102 For Gauge Used On Larger Cutters. BS-2245 KIT Blade Shim Support Kit (2 Hole) These 2-Hole Blade Shims Or Blade Supports Are Used In Some Polar EMC Paper Cutters And Some Polar 76EM Paper Cutters. They Are Sold As A Kit Which Includes The Following Parts: (2) Plastic Shim Or Support (230056) (2) Double Sided Adhesive Shim (4) Plastic Flat Head Screw (201681) Their Overall Length Is Approximately 127mm Long (5" Long) By Approximately 40mm Wide (1-9/16" Wide). The Tapered Screw Mounting Holes Are Spaced Approximately 100mm (315/16") Apart. Note That Some Polar EMC Machines Take A Shorter 2-Hole Shim. Be Sure To Measure The Length Of Your Existing Shims Before Ordering. BS-2250 KIT Blade Shim Support Kit (3 Hole) These Blade Shims Or Blade Clamp Supports Are Used In Polar EMC Paper Cutters. They Fit The Polar 115 EMC, Polar 137 EMC, And The Polar 155 EMC Paper Cutters. They Are Sold As A Kit Which Includes The Following Parts: (2) Plastic Shim Or Support (224904) (2) Double Sided Adhesive Shim (224910) (6) Plastic Flat Head Screw (201681) Their Overall Length Is Approximately 177mm Long (7" Long) By Approximately 40mm Wide (1-9/16" Wide). The Tapered Screw Mounting Holes Are Spaced Approximately 76mm (3") Apart. P325 Polar 72 CE Latch Pin Assembly For False Clamp The Overall Length Of The Latch Pin (Including The Threaded Shank) Is Approximately 43mm Long (1 3/4" Long). It Is 8mm In Diameter At The Latching End. This Assembly May Also Fit Some Of The Other Smaller Sizes Of Polar Cutters, Such As The Powermax 28. This Assembly Includes The Latch Pin (216198), The Spring (207788), The Knurled Knob With Lock Pin (205527, 200787), And A Self-Locking Hex Nut.

9

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Miscellaneous Cutter Parts

P326 Latch Pin Assembly For False Clamp This Latch Pin Assembly Locks Into The False Clamp Pin On Many Different Sizes Of Polar Paper Cutters. The Overall Length Of The Latch Pin (Including The Threaded Shank) Is Approximately 65mm Long (2 9/16" Long). The Main Latch Area Is 8mm In Diameter. This Assembly Includes The Latch Pin (206036), The Spring (205687), The Knurled Knob With Lock Pin (205527, 200787), And A Self-Locking Nut. P327 Latch Pin Assembly For False Clamp This Latch Pin Assembly Locks Into The False Clamp Pin On The Larger Sizes Of Polar Paper Cutters. The Overall Length Of The Latch Pin (Including The Threaded Shank) Is Approximately 70mm Long (2 3/4" Long). The Main Latch Area Is 8mm In Diameter. This Assembly Includes The Latch Pin, The Spring (205687), The Knurled Knob With Lock Pin (205527, 200787), And A Self-Locking Hex Nut. PA1025 Pull Arm For Polar 115 CE, 115 El And Some Early 115 EMC Cutters (013820, 014128) After Approximately 1984 The Polar 115 EMC (Sometimes Called The EMC I) Pull Arm Style Changed To The Type That Uses A Single Center Shear Bolt. These Are All Completely New, Non-OEM, Aftermarket Parts. The Arms Themselves Are Machined Complete From SAE 1045 Steel. This Assembly Is Supplied Complete With The Following Parts: Upper Threaded Arm (Complete With Needle Bearing), Jam Nut - Left Hand, Turnbuckle Nut, Jam Nut Right Hand, Safety Clip, Lower Threaded Arm (Complete With Internal Bronze Bushing), Lower Connector (Complete With Bronze Bushing), Guide Shaft (With Guide Shaft Set Screw And Jam Nut), Two Shear Bolts With Bolt Nuts PA1550 Turnbuckle Nut For Newer 115 And 137 Polar Cutters This Turnbuckle Nut Or Adjusting Nut Is Part Of The Polar Pull Arm Assembly (Sometimes Called A Draw Arm). It Fits The Newer Models (EMC Mon, EMC II, E, Ed, X, And XT) Of Polar 115 And Polar 137 Paper Cutters. After Approx. 1984 The Pull Arms Changed To Using This Style. These Are All Completely New, Non-OEM, Aftermarket Parts. The Overall Length Measures Approx. 4-3/4" Long, It Has An Outside Hex Size Of 36mm, And It Has Both A Left Hand And A Right Hand M24 Internal Thread. It Is Machined Complete From SAE 1045 Steel. (230046) M530 Seypa Knife Holding Hook PA1551 Upper Arm For Newer 115 And 137 Polar Paper Cutters This Upper Arm (230043) Is Part Of The Pull Arm Assembly (Sometimes Called A Draw Arm). It Fits The Newer Models (EMC Mon, EMC II, E, Ed, X, And XT) Of Polar 115 And Polar 137 Paper Cutters. After Approximately 1984 The Pull Arms Changed To This Style. These Are All Completely New, Non-OEM, Aftermarket Parts. The Overall Length Measures Approximately 111/2" And It Has A Left Hand M24 Thread. It Is Machined Complete From SAE 1045 Steel. This Is Supplied As Shown In The Photo, Complete With The Needle Bearing Installed. (207461) W902 19mm Long Handle Wrench The Overall Length Of This Long Handle Wrench (Spanner) Is 12". It Is Used To Fit Down Behind The Left Side Guide When Changing The Blade On Some Polar Paper Cutters. These 19mm (3/4") Wrenches Are Made From Drop Forged Steel W901 Polar 36mm Open End Wrench Din 894, Single End, Black Phosphate Coated. Overall Length Is 11 3/4". W903 Polar 46mm Open End Wrench Din 894, Single End, Black Phosphate Coated. This Wrench Is Normally Used On The Pull Arms Of Polar 115 Cutters. Overall Length Is 14 3/4". AJ 701 Perfecta (Seypa) Plastic Air Jet (Nozzle) It Has A Spring Loaded Stainless Steel Ball To Control The Air Flow. These Air Jets Are 10mm In Diameter (.394") And Are 27.5mm Long (1.08") When Measured Over The Stainless Steel Ball. M525 Seypa Knife Leveling Gauge Made Of Phenolic Material. It Measures Approximately 33mm Wide X 24mm X 4mm Thick And It Has Two 5.5mm Wide Slots. Used On Some Seypa (Perfecta) Paper Cutters. ZW47 Book Clamp (1 Pair) "Economy" Style Spine Clamp Or Book Clamp Sometimes Called Book Trimming Guides For Cutter Back Gauge., These Clamps Keep Books And Other Stapled Or Stitched Booklets Flat For Accurate And Square Cutting By Holding Down The Spine Of A Book. The Book Clamps Install On The Guillotine Paper Cutter Back Gauge By Tightening Them To The Back Gauge Ribs. They Are Made Of Cast Bronze And Are Sold In Pairs. ZW46 Book Clamp (1 Pair) "Challenge" Style Book Clamp Sometimes Called Book Trimming Guides For Cutter Back Gauge. These Clamps Keep Books And Other Stapled Or Stitched Booklets Flat For Accurate And Square Cutting By Holding Down The Spine Of A Book. The Book Clamps Install On The Guillotine Paper Cutter Back Gauge By Tightening Them To The Back Gauge Ribs. They Are Made Of Cast Bronze And Are Sold In Pairs. Pressure Gauge 2" 0-2000 ZJ56479272 0-3000 ZJ56479280

AJ603 Wohlenberg Air Jet Nozzle It Has A Spring Loaded Stainless Steel Ball. These Air Jets Are 16mm In Diameter (.630") At The Large End By 34mm Long (1.34") When Measured Over The Stainless Steel Ball. ZJ67219162 Nylon Tipped Thumbscrew That Locks The Backgauge On Challenge 3/8-16 Thread 1 11/2" Long Under Head 10 This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Miscellaneous Cutter Parts

Angle Cutter Guide AC10 Angle Cutter Guide For Guillotine Paper Cutters. This Aluminum Angle Cutting Guide Is Quick And Easy To Install. The Two Clamps Attach To The Paper Cutter Back Gauge Ribs. Once It Is Secured In Place It Will Not Slip Out Of Position, Such As Some Single Clamp Guides Are Prone To Do. It Is Fully Adjustable For Cutting Any Angle From 0 To 90 Degrees. Once It Is Set In Position It Will Allow For Repeated Cuts At The Same Angle. It Will Accommodate A Stack Of Paper Or Card Stock Up To 2-5/8" High. A Box End Wrench Is Included With Each Guide To Aid In Installation And Adjustment. Angle Cutter Guide The Angle Guide Locks On To Back Gauge Of All Standard Cutters (1/2" Wide Rake Segments) To Let You Cut Stacks At Any Angle From Zero To 45 Degrees. Simply Adjust To Desired Angle, Tighten, And Trim. Magnetic Clamp Pad A Durable Foam Pad Laminated To A Rubberized Magnetic Foundation Provides For An Economical Means For Protecting The Top Sheets Of Carbon, NCR, And Other Paper Stock From Marks Caused By Guillotine Clamp Pressure. Comes In A Package Of Two. Pads Measure 3"X15". Special Lengths Are Available Upon Request. ZE205 Switch Bushing Mount Cross Roller Challenge Blade Up, Backgauge, Cam ZE209 Switch Challenge Clamp Up

ZE533 Switch Challenge Red Cut Button Switch

ZE350 Switch Triumph Blade Up & Down

Hose Kit For Challenge 305 Paper Cutters With Horizontal Mounted Motors DFHOSE KIT 305 Set Of 4 Hoses 1) 24" Long Hose With A #8 Female Jic On Both Ends 3) 24" Long Hoses With A #8 Female Jic On One End And A 3/8 Male Pipe On The Other End Hoses Are Also Available Separately Hose Kit For Challenge 305 Paper Cutters With Vertical Mounted Motors DF HOSE KIT 305-2 Set Of 9 Hoses 4) 25" Long Hoses With A #8 Female JIC On Both Ends 1) 18" Long Hose With A #8 Female JIC On One End And A #6 Female JIC On The Other End 1) 35" Hose With A #8 Female JIC On Both Ends 1) 28" Hose With A #8 Female JIC On Both Ends 1) 17" Hose With A #4 Female JIC On Both Ends Hoses Are Also Available Separately Piston That Holds Up Cover On MBM (Triumph) 4850, 6550 YT9003428 5221 YT9003437 5550, 5551 YT04 493 0014 7228 YT9002167 Brake For MBM (Triumph) Cutters 4810, 4850, 5221, 6550, 7228 YT5250174 220-240V YT5250184 115V YT5250194 100/115V YTD3600027 MBM (Triumph) Backgauge Crank Handle

Plastic Jogger Blocks

* Slides Easily To Reduce Operator Fatigue * Strong Magnetic Base Helps Jog Bottom Sheets Perfectly * Durable Construction Holds Up Under Toughest Conditions * Rounded Handle Accomodates A Natural Grip * Made Of Heavy-Duty Kimoplastic In A Perfect 90 Degree Angle * Available In Sizes: 3X8 3X10 4X8 4X10 4X12 5X10 5X12 5X16 5X18 6X12 6X16 6X18 6X26 Plastic Knife Guard Made Of ¼" Thick Heavy-Duty Polymer And Measuring Only 2 ½" Tall. It Provides Protection During All Non-Production Work. A Magnetic Strip Holds The Guard Securely In Place, Keeping The Knife Tip Suspended. A Black And Yellow Safety Stripe Is Added For Increased Safety. Order Guards 1" Longer Than Knife. Not Intended To Replace Knife Board. ZE203 Switch Bushing Mount Over Travel Plunger Challenge Blade Down. ZE204 Switch Bushing Mount Roller In Line Challenge Foot Pedal & Backgauge Challenge 370 Air Challenge Cut Button ZE726 Red Button ZE731 Black Button

Challenge Cylinder Seal kits DFSEAL-265HBE-B 265HBE Blade Cylinder DFSEAL-370G-C 370G Clamp Cylinder DFSEAL-B 305 Old Style Blade Cylinder DFSEAL-C 305 Old Style Clamp Cylinder DFSEAL-B-NS 305 New Style Blade Cylinder New Style Cylinders Have A Bolt Together End Gland Instead Of A Snap Ring 11

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Miscellaneous Cutter Parts / Cutting Sticks

YT9001340 Triumph Cut Button Lovejoy S-Flex Type Shaft Couplings Hubs Bore 4J 5J 1/2 ZJ35408772 5/8 ZJ35408780 ZJ35408855 3/4 ZJ35408798 ZJ35408863 7/8 ZJ35408806 ZJ35408871 1 ZJ35408814 ZJ35408889 1 1/8 ZJ35408897 1 1/4 1 3/8 JE Rubber Sleeve Inserts 4J ZJ35408756 5J ZJ35408822 6J ZJ35408905 6J ZJ35408947 ZJ35408954 ZJ35408962 ZJ35408970 ZJ35408988 ZJ35408996

ZE1200 Triumph Amber Panel Light 24V Rectangular Mount Challenge Blade Adjusting Bolt 193-230HL DFS-67-1 370G DFS-68-2 305, 265 DF4449 1/4X1 1/4 250V Fuses ZE100 3/4A Fast ZE102 5A Time Delay ZE104 15A Time Delay

ZE101 3A Time Delay ZE103 10A Time Delay ZE105 20A Time Delay

Blade Saver® Cutting Sticks Are Made Exclusively With A Special Grade Of Material Called KimoplasticTM The Most Durable, Non-Abrasive, And Cost-Effective Material Designed For Paper Cutting. The Natural Lubricity And Self-Healing Characteristics Of KimoplasticTM Will Keep A Bladesaver Stick On Your Machine Long After Other Sticks Have Been Rolled Or Replaced. Specify Length, Width, Height And Material When Ordering. Material Standard White Standard Red Heavy Duty Red Heavy Duty Green Premium Red Premium HerculiteTM Square Sticks By Fractions 3/8 X 3/8 15/32 X 15/32 1/2 X 1/2 33/64 X 33/64 9/16 X 9/16 19/32 X 19/32 5/8 X 5/8 3/4 X 3/4 25/32 X 25/32 Rectangular Sticks By Fractions 1/8 X 15/32 5/32 X 25/64 5/32 X 3/8 5/32 X 33/64 5/32 X 23/32 5/32 X 25/32 5/32 X 15/16 5/32 X 2 3/8 3/16 X 3/8 9/32 X 19/32 5/16 X 3/4 3/8 X 25/32 Color Square Flat Description The Standard By Which All Sticks Are Measured. It's Resiliency, Self-Healing, And Non-Abrasive Characteristics Will Not Compromise Blade Life. Recommended For Use With Every Grade Of Steel Knife. Same Characteristics As Standard White. Long-Lasting, Durable Material Harder Than Standard White And The Premium Materials. Recommended For Heavy-Duty Cutting Operations. Same Characteristics As Heavy Duty Red. The Most Resilient, Self-Healing Material On The World Market. Elasticity Allows Stick To Recover Its Shape And Size Quickly From Knife Cuts. Recommended For All Cutting Operations, Particularly Those Running Extended Hours. Exceptional Performance Is Achieved When Used With Hss Or Carbide Knives. Same Characteristics As Premium. An Extremely Durable Material Made Exclusively For Three-Knife Trimmers Including Kolbus, Muller Martini, Wohlenberg, And Lawson. Square Sticks By Decimals 0.394 X 0.394 0.472 X 0.472 0.495 X 0.495 0.512 X 0.512 0.551 X 0.551 0.585 X 0.585 0.623 X 0.623 0.740 X 0.740 0.787 X 0.787 Rectangular Sticks By Decimals 0.118 X 0.472 0.155 X 0.386 0.155 X 0.394 0.155 X 0.510 0.155 X 0.712 0.155 X 0.787 0.155 X 0.945 0.155 X 2.375 0.174 X 0.390 Square Sticks By Millimeters 10 X 10 12 X 12 12.6 X 12.6 13 X 13 14 X 14 15 X 15 16 X 16 19 X 19 20 X 20 Rectangular Sticks By Millimeters 3 X 12 4 X 9.8 4 X 10 4 X 13 4 X 18 4 X 20 4 X 24 4 X 60 4.5 X 10 4.5 X 9.8 7 X 15 8 X 19.7 10 X 20

0.177 X 0.394 0.180 X 0.384 0.276 X 0.590 0.315 X 0.775 0.370 X 1.120 0.370 X 1.245 0.394 X 0.787 0.397 X 0.787

Knives Are Available In 3 Grades Standard Inlay (INL) BI-Metallic Composition Consisting Of One Part High Alloy Tool Steel And One Part Standard Grade Steel. A Special Fusion Process Bonds These Two Grades Of Steel Together To Produce A High Quality Knife At An Economical Price. High Carbon, High Chrome (HC,HC) Solid D2 Tool Steel. A Precise, Through Hardended Knife That Possesses Extremely High Wear Resistant Properties. Used Solely In Bed Knives For Three-Knife Trimmers. High Speed Steel (HSS) Bi-Metallic Composition Consisting Of One Part 18% Tungsten, High Speed Steel, And One Part Standard Grade Steel. A Special Fusion Process Bonds These Two Grades Of Steel Together To Produce An Extremely Wear Resistant Knife. Expect Three To Five Times Longer Knife Life Than Conventional Blades. 12 This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knives

Part Number YK42150 YK42170 YK43900 YK43900HSS YK30500 Grade INL INL INL HSS INL Length 37.795 51.969 37.795 37.795 37.811 Width 5.512 5.906 4.213 4.213 4.189 Thickness 0.394 0.472 0.381 0.381 0.378 Machine Adast Adast Baumfolder Baumfolder Baumfolder Baum/Lawson Camco Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge Challenge C&P C&P C&P C&P Duracut Duracut EBA EBA EBA Grapha Grapha Grapha Grapha Grapha Model 1898-3, MH 80/5 MS-115 78, 80, HY 78, 80, HY PM 80 See Lawson See Rosback Three Knife Trimmer Three Knife Trimmer Three Knife Trimmer Spartan 150 Spartan 150 20, Multi 2020, Titan 200 20, Multi 2020, Titan 200 193H 193 193 230H, Pro Cut 235 230MB 265C 26 1/2", 265F 265H, Titan 265 26 1/2" Cut, 265, Pro Cut 265 305C 305H, 305M 305H, 305M 305F 305 305XG 305XG 30 1/2" 34 1/2" 34 1/2", 34", 35 1/2" 36 1/2" 370XG 370 37TCM 37TCM 420 42TCM 42TCM 1927A Design 1 2627 30 1/2" HY 3027 X3727 # Holes (Size) 16 36 6 (M10) 6 12 Notes

YK31301 YK31201 YK31401 YK31460 YK31460HSS YK31780 YK31780HSS YK31800 YK31900 YK31920 YK32000 YK32100 YK32800 YK33000 YK33100 YK33110 YK33200 YK33300 YK33300HSS YK33400 YK33310 YK33480 YK33480HSS YK33500 YK33950 YK34100 YK34400 YK34450 YK34500 YK34510 YK34510HSS YK34550 YK34560 YK34560HSS YK34600 YK35100 YK35200 YK36100 YK37771HSS YK3772HSS YK37780 YK37780HSS YK42287 YK42350 YK42350HSS YK42455HCHC YK42454HCHC YK42453HCHC

INL INL INL INL HSS INL HSS INL INL INL INL INL INL INL INL INL INL INL HSS INL INL INL HSS INL INL INL INL INL INL INL HSS INL INL HSS INL INL INL INL HSS HSS INL HSS INL INL HSS HC, HC HC, HC HC, HC

12.000 12.000 13.000 18.250 18.250 23.750 23.750 24.000 24.000 24.500 27.000 27.000 30.000 30.750 30.750 31.250 34.000 34.750 34.750 35.000 35.250 35.750 35.750 36.000 41.000 41.000 42.000 43.250 44.000 44.500 44.500 49.000 49.500 49.500 23.000 30.000 34.000 44.000 42.520 54.724 25.984 25.984 33.071 13.976 13.976 14.173 14.173 16.535

5.000 5.000 5.000 1.625 1.625 3.000 3.000 3.500 3.500 4.000 3.500 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.000 4.500 4.000 4.500 5.000 5.000 5.000 5.000 5.000 5.000 3.250 4.000 4.000 4.000 5.000 6.299 4.094 4.094 3.937 2.560 2.560 0.925 0.925 1.181

0.500 0.500 0.500 0.250 0.250 0.374 0.374 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.438 0.375 0.375 0.375 0.438 0.438 0.438 0.438 0.375 0.438 0.431 0.431 0.431 0.431 0.431 0.375 0.438 0.375 0.437 0.500 0.541 0.394 0.394 0.394 0.236 0.236 0.590 0.590 0.709

4 (1/2"-13) 4 (1/2"-13) 4 (1/2"-13) 6 6 4 (3/8"-16) 4 (3/8"-16) 8 (3/8"-16) 10 (3/8"-16) 8 (3/8"-16) 10 (3/8"-16) 10 (3/8"-16) 10 (1/2"-12) 12 (1/2"-12) 12 (3/8"-16) 12 (3/8"-16) 12 (1/2"-12) 12 (3/8"-16) 12 (3/8"-16) 14 (1/2"-12) 12 (3/8"-16) 12 (3/8"-16) 12 (3/8"-16) 14 (1/2"-12) 14 (1/2"-12) 14 (1/2"-12) 12 (1/2"-12) 18 (3/8"-16) 18 (1/2"-12) 18 (3/8"-16) 18 (3/8"-16) 21 (1/2"-12) 21 (3/8"-16) 21 (3/8"-16) 4 (3/8"-16) 12 (1/2"-12) 14 (1/2"-12) 16 (1/2"-12)

Top Left Top Right Top Front

19" Advance Diamond

Advance, 5 5/8" Centers 4 9/32" Centers Diamond, 26 1/2" Cut

30" Advance Diamond

Diamond Diamond Diamond Diamond 37"

19" 26" 30" 37"

10/520/550, 5550 10/520/550, 5550 28" Programmable / 721, 7228 DS 217, DS 221, DS 235, DSS 890 Fox, Grapha 1522 Minuteman DS 217, DS 221, DS 235, DSS 890 Fox, Grapha 1522 Minuteman Grapha 1522 Minuteman Grapha 1522 Minuteman Grapha 1522 Minuteman

10 (M10) 10 (M10) 6 (M10) 16 16 4 4 4 Top Right Top Right Bottom Right Bottom Left Bottom Front 13

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knives

Part Number YK42450 YK42450HSS YK41900 YK41900HSS YK42204HCHC YK42000HSS YK42000HCHC YK42100 YK42202HSS YK42202HCHC YK42204HSS YK43130HSS YK43125HSS YK43120 YK43120HSS YK37697HSS YK37700 YK37940 YK37940HSS YK37960 YK37960HSS YK38000HSS YK38010HSS YK38015HSS YK38071HSS YK38070HSS YK38200HSS YK38400 YK38400HSS YK38100 YK38100HSS YK38500 YK38500HSS YK38550HSS YK38560M YK38570 YK38570M YK38700M YK38800 YK38800HSS YK38820M YK38820 YK38820MHSS YK38820HSS YK39400 YK39200 YK39450 YK39700HSS YK39820 YK39850 YK39850HSS YK40200 14 Grade INL HSS INL HSS HC, HC HSS HC, HC INL HSS HC, HC HSS HSS HSS INL HSS HSS INL INL HSS INL HSS HSS HSS HSS HSS HSS HSS INL HSS INL HSS INL HSS HSS INL INL INL INL INL HSS INL INL HSS HSS INL INL INL HSS INL INL HSS INL Length 16.535 16.535 14.250 14.250 14.250 15.000 15.000 20.250 22.000 22.000 22.000 15.940 15.940 18.700 18.700 15.748 28.930 22.480 22.480 27.952 27.952 48.031 54.724 55.510 15.940 22.047 15.345 16.688 16.688 19.685 19.685 22.000 22.000 41.732 42.126 43.310 43.310 52.756 53.000 53.000 54.330 54.330 54.330 54.330 63.000 63.000 64.000 67.000 72.000 73.000 73.000 83.000 Width 2.933 2.933 3.000 3.000 3.750 0.984 0.984 3.000 0.984 0.984 3.000 5.905 5.905 5.118 5.118 2.756 2.950 2.755 2.755 2.755 2.755 5.512 5.906 5.910 4.530 4.530 4.527 4.500 4.500 4.527 4.527 4.500 4.500 4.921 4.921 4.920 4.920 4.921 5.000 5.000 4.921 4.921 4.921 4.921 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 Thickness 0.236 0.236 0.375 0.375 0.250 0.500 0.500 0.375 0.500 0.500 0.375 0.622 0.622 0.464 0.464 0.374 0.314 0.234 0.234 0.313 0.313 0.500 0.539 0.540 0.394 0.394 0.394 0.395 0.395 0.394 0.394 0.394 0.394 0.472 0.472 0.470 0.470 0.472 0.495 0.495 0.472 0.472 0.472 0.472 0.495 0.495 0.495 0.495 0.496 0.495 0.495 0.496 Machine Grapha Grapha Harris Harris Harris Harris Harris Harris Harris Harris Harris Hoerauf Hoerauf Hoerauf Hoerauf Horizon Horizon Ideal Imperial Imperial Imperial Imperial Itoh Itoh Itoh Kolbus Kolbus Lawson Lawson Lawson Lawson Lawson Lawson Lawson Lawson Lawson Lawson Lawson Lawson Lawson/Baum Lawson/Baum Lawson Lawson Lawson Lawson Lawson Lawson Lawson/Baum Lawson Lawson Lawson/Baum Lawson/Baum Lawson Model Grapha 1522 Minuteman Grapha 1522 Minuteman 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 562, 640, 642, 650, 652 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 630, 636, ST90 562, 640, 642, 650, 652 562, 640, 642, 650, 652 562, 640, 642, 650, 652 145AF 145AF 135A, 145AF 135A, 145AF 3-YKIFE, HT-70 H-1, PC-64 See MBM 18 1/2" Cut 18 1/2" Cut 24" Cut 24" Cut 100 115 115 B, JAC 1150 HD 150, HD 151 HD 150, HD 151 44 FS100 38F, 44 FS50, A 43 38F, 44 FS50, A 43 38 F, 44 FS100 38 F, 44 FS100 44 FS50, A 43 44 FS50, A 43 RW 6256 88 T, A 86, A 90 Metric 90 F, 92 F Standard 90 F, 92 F Metric A 112, A 115 Metric, Regent 42", MPU-42, Pacemaker II 42", MPU-42, Pacemaker II 115 F Metric 115 F Standard 115 F Metric 115 F Standard 52", Pacemaker II 52", Pacemaker I 52", MPU-52, Pacemaker III & IV 56", Pacemaker II 59", Pacemaker II 60", MPU-60, Pacemaker II 60", MPU-60, Pacemaker II 69", Pacemaker III/IV # Holes (Size) 12 12 5 5 7 5 5 7 7 7 7 8 8 8 8 6 5 5 5 5 5 28 30 30 9 10 10 10 10 12 12 12 12 10 10 (M12) 11 (1/2"-13) 11 (M12) 13 (M12) 27 27 14 (M12) 14 (1/2"-13) 14 (M12) 14 (1/2"-13) 33 33 33 33 36 36 36 42 Notes Top Front Top Front Top Side (L&R) Top Side (L&R) Top Front Bottom Side (L&R) Bottom Side (L&R) Top Front Bottom Front Bottom Front Top Front Top Right Side Top Left Side Top Front Top Front Front (L&R)

TOP SIDE (L&R) Top Front Side (L&R) RT 343 Side (L&R) RT 343 Side (L&R) Front Front RT 343 Front RT 343 Front Regent 35 3/8"

44"

45 1/4" 45 1/4" 45 1/4" 45 1/4" 2" End To Center 3/4" End To Center

4" & 2" End To Center

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knives

Part Number YK41900 YK41900HSS YK42204HCHC YK42000HSS YK42000HCHC YK42100 YK42202HSS YK42202HCHC YK42204HSS YK42295 YK42300 YK42320 YK42325 YK42330 YK42009 YK42020 YK42150 YK42170 YK42210 YK42211 YK42214 YK42216 YK42216HSS YK42270 YK42272 YK37780 YK37780HSS YK42289 YK42287 YK41120 YK41120HSS YK41160HSS YK41160HCHC YK41200HCHC YK41750 YK41750HSS YK41700HSS YK41700HCHC YK42295 YK42300 YK42320 YK42325 YK42330 YK42595HSS YK42383HCHC YK42382HCHC YK42350 YK42360 YK42350HSS Grade INL HSS HC, HC HSS HC, HC INL HSS HC, HC HSS INL INL INL INL INL INL INL INL INL INL INL INL INL HSS INL INL INL HSS INL INL INL HSS HSS HC, HC HC, HC INL HSS HSS HC, HC INL INL INL INL INL HSS HC, HC HC, HC INL INL HSS Length 14.250 14.250 14.250 15.000 15.000 20.250 22.000 22.000 22.000 30.709 36.024 39.960 43.898 50.394 15.000 29.750 37.795 51.969 16.732 17.480 22.440 22.444 22.444 24.803 24.803 25.984 25.984 29.724 33.071 13.000 13.000 13.375 13.375 13.375 21.250 21.250 21.312 21.312 30.709 36.024 39.960 43.898 50.394 12.598 13.780 13.780 13.976 13.976 13.976 Width 3.000 3.000 3.750 0.984 0.984 3.000 0.984 0.984 3.000 3.150 3.543 3.543 4.134 4.724 2.500 4.000 5.512 5.906 1.535 1.535 3.465 3.543 3.543 3.543 3.570 4.094 4.094 3.543 3.937 5.000 5.000 1.500 1.500 1.500 5.000 5.000 1.500 1.500 3.150 3.543 3.543 4.134 4.724 2.598 2.283 2.283 2.560 2.560 2.560 Thickness 0.375 0.375 0.250 0.500 0.500 0.375 0.500 0.500 0.375 0.315 0.354 0.354 0.394 0.433 0.370 0.437 0.394 0.472 0.236 0.236 0.315 0.393 0.393 0.393 0.394 0.394 0.394 0.393 0.394 0.500 0.500 0.344 0.344 0.531 0.500 0.500 0.531 0.531 0.315 0.354 0.354 0.394 0.433 0.315 0.236 0.236 0.236 0.236 0.236 Machine Macey Macey Macey Macey Macey Macey Macey Macey Macey Mandelli Mandelli Mandelli Mandelli Mandelli Martin Yale Martin Yale Maxima Maxima Mbm Mbm Mbm Mbm Mbm Mbm Mbm Mbm Mbm Mbm Mbm Mccain Mccain Mccain Mccain Mccain Mccain Mccain Mccain Mccain Miracle Miracle Miracle Miracle Miracle Muller Martini Muller Martini Muller Martini Model 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 562, 640, 642, 650, 652 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 630, 636, ST90 562, 640, 642, 650, 652 562, 640, 642, 650, 652 562, 640, 642, 650, 652 63, LMM 62 76, LMM 72 LMM 82 238, LMM 92 107, LMM 105 376B, 7000E 2600E, 2620, 2650 1898-3, MH 80/5 MS-115 14" Manual, 3600 15", 3900, 3905, 3915 18" Manual, 4700 18" & 18 1/2" Elec., 4700, 4810, 4850 18" & 18 1/2" Elec., 4700, 4810, 4850 20 1/2" & 21" Elec & Semi Auto, 5210, 5250 21" Electric Fully Auto, 5221 # Holes (Size) 5 5 7 5 5 7 7 7 7 5 6 7 8 9 2 5 16 36 6 5 (M6) 5 5 (M10) 5 (M10) 5 (M10) 5 (M10) 10 10 5 (M10) 6 (M10) 4 4 6 6 4 6 6 5 5 5 6 7 8 9 6 5 5 16 16 16 Notes Top Side (L&R) Top Side (L&R) Top Front Bottom Side (L&R) Bottom Side (L&R) Top Front Bottom Front Bottom Front Top Front 24" Cut 28" Cut 32" Cut 36" Cut 42" Cut

15" Manual & 15" Electric

Holes Center To Center Spacing 4 15/16" Holes Center To Center Spacing 4 5/8"

10/520/550, 5550 10/520/550, 5550 25 1/2" Electric, 6550 28" Programmable / 721, 7228 A, BA, MTA A, BA, MTA BA, MTA BA, MTA A A, BA, MTA A, BA, MTA A, BA, MTA A, BA, MTA 63, LMM 62 76, LMM 72 LMM 82 238, LMM 92 107, LMM 105 301, 304, 361 4TH & 5TH Double Cut, DSS 890 4TH & 5TH Double Cut, DSS 890 DS 217, DS 221, DS 235, DSS 890 Muller Martini Fox, Grapha 1522 Minuteman DS 217, DS 221, DS 235, DSS 890 Muller Martini Fox, Grapha 1522 Minuteman DS 217, DS 221, DS 235, DSS 890 Muller Martini Fox, Grapha 1522 Minuteman This Is Only A Sample Of Items Available

Top Side (L&R) Top Side (L&R) Bottom Side (L&R) Bottom Side (L&R) Bottom Side (L&R) Top Front Top Front Bottom Front Bottom Front 24" Cut 28" Cut 32" Cut 36" Cut 42" Cut Top Side (L&R) Bottom Right Bottom Left Top Right Top Left Top Right 15

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knives

Part Number YK42350HSS YK42360HSS YK42455HCHC YK42454HCHC YK42380HSS YK42390HSS YK42390HCHC YK42380HCHC YK42550HCHC YK42583HCHC YK42584HCHC YK42604HCHC YK42605HSS YK42618HSS YK42400HSS YK42619HSS YK42453HCHC YK42450 YK42450HSS YK42340 YK42340HSS YK42370HSS YK42370HCHC YK42570HSS YK42617HSS YK42596HCHC YK42410HSS YK42594HSS YK42600HSS YK31780 YK31780HSS YK37780 YK37780HSS YK80800 YK41900 YK41900HSS YK42204HCHC YK42000HSS YK42000HCHC YK42100 YK42202HSS YK42202HCHC YK42204HSS YK42870 16 Grade HSS HSS HC, HC HC, HC HSS HSS HC, HC HC, HC HC, HC HC, HC HC, HC HC, HC HSS HSS HSS HSS HC, HC INL HSS INL HSS HSS HC, HC HSS HSS HC, HC HSS HSS HSS INL HSS INL HSS INL INL HSS HC, HC HSS HC, HC INL HSS HC, HC HSS INL Length 13.976 13.976 14.173 14.173 14.173 14.173 14.173 14.173 14.370 14.646 14.646 14.960 15.433 15.433 15.551 16.102 16.535 16.535 16.535 20.275 20.275 20.472 20.472 20.866 21.260 21.654 21.654 21.654 22.047 23.750 23.750 25.984 25.984 84.000 14.250 14.250 14.250 15.000 15.000 20.250 22.000 22.000 22.000 51.850 Width 2.560 2.560 0.925 0.925 1.575 1.575 1.575 1.575 2.362 1.004 1.004 1.265 3.149 3.543 3.150 3.543 1.181 2.933 2.933 5.512 5.512 1.575 1.575 3.740 3.543 1.575 3.150 3.740 3.149 3.000 3.000 4.094 4.094 5.000 3.000 3.000 3.750 0.984 0.984 3.000 0.984 0.984 3.000 5.708 Thickness 0.236 0.236 0.590 0.590 0.590 0.590 0.590 0.590 0.315 0.591 0.591 0.591 0.472 0.472 0.472 0.472 0.709 0.236 0.236 0.236 0.236 0.590 0.590 0.315 0.472 0.591 0.472 0.315 0.472 0.374 0.374 0.394 0.394 0.500 0.375 0.375 0.250 0.500 0.500 0.375 0.500 0.500 0.375 0.472 Machine Muller Martini Muller Martini Mull Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Model DS 217, DS 221, DS 235, DSS 890 Fox, Grapha 1522 Minuteman DS 217, DS 221, DS 235, DSS 890 Fox, Grapha 1522 Minuteman Grapha 1522 Minuteman Grapha 1522 Minuteman DS 217, DS 221, DS 235, DS 241, DSS 890 Fox DS 217, DS 221, DS 235, DS 241, DSS 890 Fox DS 217, DS 221, DS 235, DS 241, DSS 890 Fox DS 217, DS 221, DS 235, DS 241, DSS 890 Fox DS 241, DS 251, DS 335 DS 251, DS 335 DS 251, DS 335 360, 361 3670 Long # Holes (Size) 16 16 4 4 3 3 3 3 6 5 5 5 8 8 6 20 4 12 12 14 14 5 5 7 12 8 6 8 12 4 4 10 10 24 5 5 7 5 5 7 7 7 7 30 (M12) Notes Top Right Top Left Bottom Right Bottom Left Bottom Right Bottom Left Bottom Left Bottom Right Top Side Bottom Left Bottom Right Bottom Side Top Side (L&R) (Long) Top Side (L&R) (Swing Cut, Zenith) Top Side (L&R) Top Side (L&R) (Swing Cut, Zenith) Bottom Front Top Front Top Front Top Front Top Front Bottom Front Bottom Front Top Front Top Front (Swing Cut, Zenith) Bottom Front Top Front Top Front Top Front (Long)

Muller Martini 3670, 3672 Mull Martini Mull Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini Muller Martini DS 140, DS 240, DS 250 3670, 3672 Grapha 1522 Minuteman Grapha 1522 Minuteman Grapha 1522 Minuteman DS217, DS221, DS235, DSS 890 DS217, DS221, DS235, DSS 890 DS217, DS221, DS235, DSS 890 DS217, DS221, DS235, DSS 890 DS 241, DS 251, DS 335

Muller Martini 3670 Long New, 3671, 3672 Muller Martini Muller Martini Muller Martini Muller Martini Multi Multi Multicut Multicut ICE SCRAPER Olympia Omni Omni Omni Omni Omni Omni Omni Omni Omni Perfecta Pivano 301, 304, 361 DS 140, DS 240, DS 250 301, 304, 361 3670 Long 20, Multi 2020, Titan 200 20, Multi 2020, Titan 200 10/520/550, 5550 10/520/550, 5550 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 562, 640, 642, 650, 652 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 562, 630, 636, 640, 642, 650, 652, ST100, ST90 532, 542, 630, 636, ST90 562, 640, 642, 650, 652 562, 640, 642, 650, 652 562, 640, 642, 650, 652 See Royal Zenith 103-1, FG 103

Top Side (L&R) Top Side (L&R) Top Front Bottom Side (L&R) Bottom Side (L&R) Top Front Bottom Front Bottom Front Top Front

This Is Only A Sample Of Items Available

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knives

Part Number YK42890 YK43050HSS YK43200 YK43225 YK43225HSS YK43230 YK43230HSS YK43250 YK43250HSS YK43700 YK43700HSS YK43900 YK43900HSS YK43950HSS YK44100 YK44100HSS YK44200 YK44200HSS YK44450 YK44451HSS YK44450HSS YK44750 YK44750HSS YK44751HSS YK44900 YK44900HSS YK44901HSS YK45140 YK45140HSS YK45141HSS YK45170HSS YK44750 YK44750HSS YK44900 YK44900HSS YK44901HSS YK32000 YK33110 YK45193 YK45193HSS YK45650 YK45690 YK45600 YK45670HCHC YK42750 YK42750HSS YK42765 YK42765HSS YK42770 YK42770HSS Grade INL HSS INL INL HSS INL HSS INL HSS INL HSS INL HSS HSS INL HSS INL HSS INL HSS HSS INL HSS HSS INL HSS HSS INL HSS HSS HSS INL HSS INL HSS HSS INL INL INL HSS INL INL INL HC, HC INL HSS INL HSS INL HSS Length 54.924 62.480 26.968 28.149 28.149 31.693 31.693 34.173 34.173 36.417 36.417 37.795 37.795 37.795 38.976 38.976 38.976 38.976 43.110 43.110 43.110 54.724 54.724 54.724 63.189 63.189 63.189 70.271 70.271 70.271 42.520 54.724 54.724 63.189 63.189 63.189 27.000 31.250 36.500 36.500 12.500 13.375 16.250 17.000 42.913 42.913 53.150 53.150 59.646 59.646 Width 5.709 5.708 3.740 3.740 3.740 3.740 3.740 4.094 4.094 4.330 4.330 4.213 4.213 4.331 4.213 4.213 4.213 4.213 4.528 4.528 4.528 6.299 6.299 6.299 6.299 6.299 6.299 6.299 6.299 6.299 5.000 6.299 6.299 6.299 6.299 6.299 3.500 4.000 4.500 4.500 3.000 1.500 3.000 1.500 5.512 5.512 5.512 5.512 5.512 5.512 Thickness 0.471 0.512 0.381 0.381 0.381 0.374 0.374 0.381 0.381 0.382 0.382 0.381 0.381 0.461 0.381 0.381 0.461 0.461 0.461 0.461 0.461 0.541 0.541 0.541 0.541 0.541 0.541 0.541 0.541 0.541 0.500 0.541 0.541 0.541 0.541 0.541 0.375 0.375 0.438 0.438 0.494 0.500 0.500 0.500 0.472 0.472 0.472 0.472 0.472 0.472 Machine Pivano Pivano Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Polar Prism Prism Prism Prism Prism Prism Pro Cut Pro Cut Pro Cut Pro Cut Rosback Rosback Rosback Rosback Royal Zenith Royal Zenith Royal Zenith Royal Zenith Royal Zenith Royal Zenith Saber Model FG 108 FG 118 55 58 EL, 66, VM55A 58 EL, 66, VM55A 66 E, Power Max 28 66 E, Power Max 28 71, 72 C, 75 71, 72C, 75 76 EL 76 EL 78, 80, HY 78, 80, HY 78 NMW 82 EL 82 EL 82 EL, 82 ET, 82 HY, 82 ST 82 EL, 82 ET, 82 HY, 82 ST 90 CE, 92 CE, 92 EL 92 S, E, ED, EMC Version 2 Auto Trim 90CE, 92CE, 92EL 107 EL, 112 EL, 115, 115CE, 115 EL 107 EL, 112 EL, 115, 115 CE, 115 EL 115 S, E, ED, EMC Version 2 Auto Trim 137 137 137 S, E, ED, EMS Version 2 Auto Trim 155 CE, 155 EL 155 CE, 155 EL 155 S, E, ED, EMC Version 2 Auto Trim 92 107 EL, 112 EL, 115, 115 CE, 115 EL 107 EL, 112 EL, 115, 115 CE, 115 EL 137 137 137 S, E, ED, EMS Version 2 Auto Trim 230H, Pro Cut 235 26 1/2" Cut, 265, Pro Cut 265 32" Cut 32" Cut 250, Big 3 250, Big 3 250, Big 3 250, Big 3 PA 92, S 87, Seypa 92 PA 92, S 87, Seypa 92 PA 115, Seypa 115 PA 115, Seypa 115 S 32, Seypa 132 S 32, Seypa 132 See Polar # Holes (Size) 33 (M12) 36 (M12) 14 (M10) 12 (M10) 12 (M10) 14 14 12 (M10) 12 (M10) 14 (M10) 14 (M10) 6 (M10) 6 (M10) 18 (M10) 10 (M10) 10 (M10) 10 (M10) 10 (M10) 11 (M10) 22 (M10) 11 (M10) 26 (M12) 26 (M12) 39 (M12) 30 (M12) 30 (M12) 45 (M12) 32 (M12) 32 (M12) 48 (M12) 18 (M12) 26 (M12) 26 (M12) 30 (M12) 30 (M12) 45 10 12 (3/8-16) 14 (1/2-13) 14 (1/2-13) 5 (3/8-16) 4 5 (3/8-16) 4 21 (M12) 21 (M12) 30 (M12) 30 (M12) 30 (M12) 30 (M12) Diamond, 26 1/2" Cut New Syle New Syle Top Side Bottom Side Top Front Old Style Notes

This Is Only A Sample Of Items Available

17

800-375-3787

Printer's Parts Store, Inc. 1708 NW 1 St Oklahoma City, OK 73106 405-272-0272 405-232-3053 (fax) [email protected] ppsokc.com

Knives

Part Number YK46550 YK46600 YK46730 YK46730HSS YK46900 YK48000 YK48300 YK48500 YK48500HSS YK49000 YK49200 YK49400 YK49500 YK49600 YK50500 YK50500HSS YK42750 YK42750HSS YK42765 YK42765HSS YK42770 YK42770HSS YK53430HSS YK53430HCHC YK53410HSS YK53440HSS YK53420HSS YK43130HSS YK43125HSS YK43120 YK43120HSS YK43130HSS YK43125HSS YK43120 YK43120HSS YK38200HSS YK38400 YK38400HSS YK38100 YK38100HSS YK38500 YK38500HSS YK38550HSS YK38560M YK38570M YK38570 YK38700M YK38820M YK38820 YK38820MHSS YK38820HSS 18 Grade INL INL INL HSS INL INL INL INL HSS INL INL INL INL INL INL HSS INL HSS INL HSS INL HSS HSS HC, HC HSS HSS HSS HSS HSS INL HSS HSS HSS INL HSS HSS INL HSS INL HSS INL HSS HSS INL INL INL INL INL INL HSS HSS Length 42.913 50.394 53.149 53.149 74.016 45.000 51.000 53.000 53.000 57.000 59.000 61.000 63.000 66.000 77.750 77.750 42.913 42.913 53.150 53.150 59.646 59.646 12.500 12.500 12.750 18.000 21.000 15.940 15.940 18.700 18.700 15.940 15.940 18.700 18.700 15.345 16.688 16.688 19.685 19.685 22.000 22.000 41.732 42.126 43.310 43.310 52.756 54.330 54.330 54.330 54.330 Width 5.197 5.669 5.669 5.669 5.866 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.000 5.512 5.512 5.512 5.512 5.512 5.512 1.250 1.250 4.000 4.500 1.250 5.905 5.905 5.118 5.118 5.905 5.905 5.118 5.118 4.527 4.500 4.500 4.527 4.527 4.500 4.500 4.921 4.921 4.920 4.920 4.921 4.921 4.921 4.921 4.921 Thickness 0.393 0.393 0.392 0.392 0.470 0.495 0.495 0.495 0.495 0.495 0.495 0.495 0.495 0.495 0.495 0.496 0.472 0.472 0.472 0.472 0.472 0.472 0.500 0.500 0.252 0.252 0.500 0.622 0.622 0.464 0.464 0.622 0.622 0.464 0.464 0.394 0.395 0.395 0.394 0.394 0.394 0.394 0.472 0.472 0.470 0.470 0.472 0.472 0.472 0.472 0.472 Machine Schneider Senator Schneider Senator Schneider Senator Schneider Senator Schneider Senator Seybold Seybold Seybold Seybold Seybold Seybold Seybold Seybold Seybold Seybold Seybold Seypa Seypa Seypa Seypa Seypa Seypa Sheridan-Ht Sheridan-Ht Sheridan-Ht Sheridan-Ht Sheridan-Ht Stahl Stahl Stahl Stahl Triumph Vbf Vbf Vbf Vbf Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Wohlenberg Model 92 106 115 MC 115 MC 155, 157 34", 35 1/2", Dynaclamp 40", 41", Dayton 41", 42", Saber Citation, Sixty 41", 42", Saber Citation, Sixty 44", Sixty 47", Saber 50", Dayton 50", Sixty 54", Saber 65", CJ Mill, Saber, Sixty 65", CJ Mill, Saber, Sixty PA 92, S 87, Seypa 92 PA 92, S 87, Seypa 92 PA 115, Seypa 115 PA 115, Seypa 115 S 32, Seypa 132 S 32, Seypa 132 HT 18 Trimmer, HT Trimmer HT 18 Trimmer, HT Trimmer HT Trimmer HT Trimmer HT Trimmer 145AF 145AF 135A, 145AF 135A, 145AF See MBM 145AF 145AF 135A, 145AF 135A, 145AF 44 FS100 38F, 44 FS50, A 43 38F, 44 FS50, A 43 38 F, 44 FS100 38 F, 44 FS100 44 FS50, A 43 44 FS50, A 43 RW 6256 88 T, A 86, A 90 Metric 90 F, 92 F Metric 90 F, 92 F Standard A 112, A 115 Metric, Regent 115 F Metric 115 F Standard 115 F Metric 115 F Standard # Holes (Size) 27 (M10) 33 (M12) 36 (M12) 36 (M12) 45 (M12) 21 (1/2"-12) 24 (1/2"-12 24 (1/2"-12) 24 (1/2"-12) 27 (1/2"-12) 27 (1/2"-12) 30 (1/2"-12) 30 (1/2"-12) 30 (1/2"-12) 36 (1/2"-12) 36 (1/2"-12) 21 21 30 30 30 30 4 4 5 5 5 8 (M12) 8 (M12) 8 (M12) 8 (M12) 8 8 8 8 10 (M12) 10 (1/2"-13) 10 (1/2"-13) 12 (M12) 12 (M12) 12 (1/2"-13) 12 (1/2"-13) 10 (1/2"-13) 10 (M12) 11 (M12) 11 (1/2"-13) 13 (M12) 14 (M12) 14 (1/2"-13) 14 (M12) 14 (1/2"-13) Notes 36" Cut 45" Cut 45 1/4" Cut 45 1/4" Cut 61" Cut Angle End

Bottom Side (L&R) Bottom Side (L&R) Top Side (L&R) Top Front Bottom Front Top Right Side Top Left Side Top Front Top Front Top Right Side Top Left Side Top Front Top Front Side (L&R) Rt 343 Side (L&R) Rt 343 Side (L&R) Front Front Rt 343 Front Rt 343 Front Regent 35 3/8"

44" 45 1/4" 45 1/4" 45 1/4" 45 1/4"

This Is Only A Sample Of Items Available

Information

18 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

202118


You might also be interested in

BETA
Tseries FAQ list. (formerly asked questions) Version 0.6bjuly 1998
untitled
untitled