Read Viton_e.pdf text version

· Operating temperature range -55oC to +200oC · Flame retarded · System 200 tubing · Shrink ratio 2:1


Heat-shrinkable, chemical resistant, high temperature tubing

Raychem Viton-E premium heatshrinkable tubing is fabricated by Raychem from a crosslinked fluoroelastomer material, designed for a wide range of applications. Viton-E tubing is resistant to a wide variety of fuels, lubricants, acids and solvents at elevated temperatures, is flame resistant (self extinguishing) and meets stringent Temperature rating

military requirements. Quickly and simply installed, resistant to weather, radiation and ozone, Viton-E tubing has a continuous operating temperature from -55°C to +200°C, up to 400°C for short periods. The product is printed with the product description and size.

Viton-E tubing is especially suitable as a protection for wiring in missiles, aircraft and throughout chemical plants. Resistance to impact, abrasion and mechanical abuse is an inherent feature of this material. It is used in conjunction with -12 moulded parts, to form part of Raychem System 200.

Operating temperature range: Minimum shrink temperature: Minimum full recovery temperature:

-55°C to +200°C +100°C +175°C

Ordering information




Inside diameter D (min) Expanded as supplied mm 3.2 4.8 6.4 10.0 12.7 19.0 25.4 38.0 51.0 d (max) Recovered after heating mm 1.6 2.4 3.2 4.8 6.4 9.5 12.7 19.0 25.4

Wall thickness W (nom) Recovered after heating mm 0.76 0.84 0.89 1.02 1.22 1.45 1.78 2.41 2.79

Standard package Spool quantity m 50 50 50 50 30 30 30 15 15

Weight g/m 9 14 18 30 47 83 132 273 406 Ordering description Viton-E- 1/8-0 Viton-E-3/16-0 Viton-E- 1/4-0 Viton-E- 3/8-0 Viton-E- 1/2-0 Viton-E- 3/4-0 Viton-E-1-0 Viton-E-11/2-0 Viton-E- 2-0

The largest size which will recover snugly over the component to be covered should be ordered. The wall thickness of the tubing will be less than specified if recovery is restricted during shrinkage. Other lengths and sizes are available subject to special order.

Standard colours

Colour Code

Black 0



VG 95343 Part 5 Type E VDE 0341/Pt 9005 Def Stan 59-97 Issue 3 Type 4A BS 4G-198 Part 3 12A


Test Heat Ageing: Flexibility (2% secant): Dielectric strength: Flammability: Fluid resistance:

Test method ISO 188 (168h at 250°C) ASTM D882 IEC 243 ASTM D876 24h at various temperatures Test fluids:

Test requirement Ultimate elongation: 83 Mpa (max) 6 MV/m (min) Duration of burning 15 s Tensile strength: Ultimate elongation: 8.8 MPa (min) 250% (min) 200% (min)

Aircraft fuel to ISO1817 liquid B Hydraulic fluid 4515 (93°C) Lubricating oil 0-148 (93°C)

For full product performance details consult Raychem Specification RK 6014/1.


Raychem Specification RK 6014/1. Material Safety Data Sheet available on request. Installation instructions available on request.

Raychem and VITON-E are trademarks of Raychem Interconnect, a division of Tyco Electronics Corporation. Raychem Interconnect Cheney Manor Industrial Estate Swindon, Wiltshire SN2 2QE Tel: (01793) 528171 Fax: (01793) 616652

All of the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.




2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate


Notice: fwrite(): send of 205 bytes failed with errno=104 Connection reset by peer in /home/ on line 531