Read Microsoft Word - KEMX-4030_manual_02012010.doc text version

KEMX-4030

Industrial Motherboard in Mini-ITX form factor with Intel® GM45/ ICH9M

User's Guide

KEMX-4030 User's Manual

I

Contact Info:

Quanmax Inc. 5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District, Taipei, Taiwan 114 Tel: +886-2-2799-2789 Fax: +886-2-2799-7399 www.quanmax.com

Visit our site at:

© 2009 Quanmax Inc. All rights reserved. The information in this user's guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein. This user's guide may contain or reference information and products protected by copyrights or patents and does not convey any license under the patent rights of Quanmax, nor the rights of others. Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade names used in this user's guide are the property of their respective owners. All rights reserved. This user's guide contains information proprietary to Quanmax. Customers may reprint and use this user's guide in other publications. Customers may alter this user's guide and publish it only after they remove the Quanmax name, cover, and logo. Quanmax reserves the right to make changes without notice in product or component design as warranted by evolution in user needs or progress in engineering or manufacturing technology. Changes which affect the operation of the unit will be documented in the next revision of this user's guide.

Revision 1.0 1.01 1.02 1.03

Date 06/09/2009 08/05/2009 12/16/2009 02/01/2010

Edited by SLee SLee SLee SLee

Changes Initial Release Remove CF socket from spec. Correct RS232/422/485 pin assignment Note of 1st Memory Slot

KEMX-4030 User's Manual

II

Content

Content

Content....................................................................................................................... 3 Figures ....................................................................................................................... 5 Tables......................................................................................................................... 6 Safety Instructions...................................................................................................... 8 Before You Begin...................................................................................... 8 When Working Inside a Computer............................................................ 8 Preventing Electrostatic Discharge........................................................... 9 Preface..................................................................................................................... 10 How to Use This Guide........................................................................... 10 Unpacking .............................................................................................. 10 Regulatory Compliance Statements ....................................................... 10 Warranty Policy ...................................................................................... 11 Maintaining Your Computer .................................................................... 12 Chapter 1 Introduction ........................................................................................... 15 Overview ................................................................................................ 15 Product Specifications ............................................................................ 16 System Block Diagram ........................................................................... 17 Mechanical Dimensions.......................................................................... 18 Chapter 2 Hardware Settings ................................................................................ 20 Overview ................................................................................................ 20 Jumper Settings and Pin Definitions....................................................... 21 Jumper Settings ......................................................................................... 23 Rear Panel Pin Assignments...................................................................... 24 Main Board Pin Assignments ..................................................................... 26 Chapter 3 System Installation ................................................................................ 32 Processor Installation ............................................................................. 32 Processor Handling.................................................................................... 32 Installing the CPU ...................................................................................... 32 Removing the CPU: ................................................................................... 34 Cooler Installation................................................................................... 34 Memory Module Installation.................................................................... 35 Expansive Interfaces .............................................................................. 37 Chapter 4 AMI BIOS Setup.................................................................................... 38 Overview ................................................................................................ 38

KEMX-4030 User's Manual 3

Content Chapter 5 Chapter 6 Chapter 7 Main Menu.............................................................................................. 39 Advanced Menu ..................................................................................... 40 Boot Menu .............................................................................................. 44 Chipset Menu ......................................................................................... 45 Power Menu ........................................................................................... 46 Security Menu ........................................................................................ 47 Exit Menu ............................................................................................... 48 Driver Installation .................................................................................. 49 DIO KIT User Guide .............................................................................. 50 WatchDog Timer Sample Code............................................................. 55

KEMX-4030 User's Manual

4

Figures

Figures

Figure 1 Block Diagram............................................................................................ 17 Figure 2 KEMX-4030 Mechanical Dimensions ......................................................... 18 Figure 3 KEMX-4031 Mechanical Dimensions ......................................................... 19 Figure 4 Jumper Connector...................................................................................... 20 Figure 5 KEMX-4030 Jumper and Connector Locations .......................................... 21 Figure 6 KEMX-4031 Jumper and Connector Locations .......................................... 22 Figure 7 Disengage the socket actuator................................................................... 32 Figure 8 CPU alignment in Micro-FCPGA Socket (Socket P) .................................. 33 Figure 9 Secure the processor in the socket ............................................................ 33 Figure 10 Memory Installation .................................................................................. 35 Figure 11 Expansive Interfaces ................................................................................ 37

KEMX-4030 User's Manual

5

Tables

Tables

Table 1 KEMX-4030 Specification ............................................................................ 16 Table 2 Jumper List .................................................................................................. 23 Table 3 JP1, Panel Power Selection......................................................................... 23 Table 4 JP2, Backlight Power Selection ................................................................... 23 Table 5 JP3, Backlight Enable Selection .................................................................. 23 Table 6 J1, Clear CMOS Selection........................................................................... 23 Table 7 PRTS1, LPT port Signal / Power Selection.................................................. 24 Table 8 HDMI1, 2-Port HDMI Connector (KEMX-4030 only) .................................... 24 Table 9 AUO1, 3-Port Audio phone jack ................................................................... 24 Table 10 LANC 1/2/3, LAN(1-3) RJ-45 + USB Port Connector................................. 24 Table 11 KM1, PS/2 KB/MS Connector .................................................................... 25 Table 12 VACM1, VGA Connector & RS-232/422/485 Port Connector .................... 25 Table 13 Internal Connector List............................................................................... 26 Table 14 ATXP1, ATX 24-Pin Power Connector ....................................................... 26 Table 15 ATXP2, 4-Pin +12V Input Power Connector .............................................. 27 Table 16 JP4, Panel Backlight Wafer ....................................................................... 27 Table 17 DIO1, Digital Input / Digital Output Pin Header .......................................... 27 Table 18 CN2 - CN6, COM2 - COM6 RS-232 Box Header ...................................... 27 Table 19 FAN1& FAN2, 3-Pin FAN Connector ......................................................... 28 Table 20 J2, Front Panel 1 Pin Header..................................................................... 28 Table 21 J3, Front Panel 2 Pin Header..................................................................... 28 Table 22 LVDS1, LVDS Panel Connector ................................................................. 28 Table 23 USBC1-C3,USB2.0 Port 7-12 Pin Header ................................................. 29 Table 24 CF1, CF Type II Connector ........................................................................ 29 Table 25 AUD2, Audio AMP Right Output Wafer ...................................................... 29 Table 26 AUD3, Audio AMP Left Output Wafer ......................................................... 30 Table 27 SATA1-4, SATA Connector......................................................................... 30 Table 28 PCIE2, PCIe x 4 Slot ................................................................................. 30 Table 29 PRT1, LPT Port Box Header...................................................................... 31 Table 30 BIOS Main Menu ....................................................................................... 39 Table 31 SATA and onboard CF Device Setting Menu ............................................. 39 Table 32 System Information.................................................................................... 40 Table 33 Advanced Menu ......................................................................................... 40 Table 34 Onboard I/O Configuration......................................................................... 41

KEMX-4030 User's Manual 6

Tables Table 35 OnBoard Peripherals Configuration Settings............................................. 42 Table 36 Hardware Health Configuration.................................................................. 43 Table 37 Trusted Computing .................................................................................... 43 Table 38 Boot Menu ................................................................................................. 44 Table 39 Chipset Menu............................................................................................. 45 Table 40 Power Menu............................................................................................... 46 Table 41 Security Menu............................................................................................ 47 Table 42 Exit Menu................................................................................................... 48

KEMX-4030 User's Manual

7

Safety Instructions

Safety Instructions

Before You Begin

Before handling the product, read the instructions and safety guidelines on the following pages to prevent damage to the product and to ensure your own personal safety. Refer to the "Advisories" section in the Preface for advisory conventions used in this user's guide, including the distinction between Warnings, Cautions, Important Notes, and Notes. Always use caution when handling/operating a computer. Only qualified, experienced, authorized electronics service personnel should access the interior of a computer. The power supplies produce high voltages and energy hazards, which can cause bodily harm. Use extreme caution when installing or removing components. Refer to the installation instructions in this user's guide for precautions and procedures. If you have any questions, please contact Quanmax Post-Sales Technical Support. WARNING High voltages are present inside the chassis when the unit's power cord is plugged into an electrical outlet. Turn off system power, turn off the power supply, and then disconnect the power cord from its source before removing the chassis cover. Turning off the system power switch does not remove power to components.

When Working Inside a Computer

Before taking covers off a computer, perform the following steps: 1. Turn off the computer and any peripherals. 2. Disconnect the computer and peripherals from their power sources or subsystems to prevent electric shock or system board damage. This does not apply when hot swapping parts. 3. Follow the guidelines provided in "Preventing Electrostatic Discharge" on the following page.

KEMX-4030 User's Manual 8

Safety Instructions 4. Disconnect any telephone or telecommunications lines from the computer. In addition, take note of these safety guidelines when appropriate: To help avoid possible damage to system boards, wait five seconds after turning off the computer before removing a component, removing a system board, or disconnecting a peripheral device from the computer. When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some cables have a connector with locking tabs. If you are disconnecting this type of cable, press in on the locking tabs before disconnecting the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before connecting a cable, make sure both connectors are correctly oriented and aligned. CAUTION Do not attempt to service the system yourself except as explained in this user's guide. Follow installation and troubleshooting instructions closely.

Preventing Electrostatic Discharge

Static electricity can harm system boards. Perform service at an ESD workstation and follow proper ESD procedure to reduce the risk of damage to components. Quanmax strongly encourages you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing equipment. You can also take the following steps to prevent damage from electrostatic discharge (ESD): When unpacking a static-sensitive component from its shipping carton, do not remove the component's antistatic packing material until you are ready to install the component in a computer. Just before unwrapping the antistatic packaging, be sure you are at an ESD workstation or grounded. This will discharge any static electricity that may have built up in your body. When transporting a sensitive component, first place it in an antistatic container or packaging. Handle all sensitive components at an ESD workstation. If possible, use antistatic floor pads and workbench pads. Handle components and boards with care. Don't touch the components or contacts on a board. Hold a board by its edges or by its metal mounting bracket. Do not handle or store system boards near strong electrostatic, electromagnetic, magnetic, or radioactive fields.

KEMX-4030 User's Manual 9

Preface

Preface

How to Use This Guide

This guide is designed to be used as step-by-step instructions for installation, and as a reference for operation, troubleshooting, and upgrades. NOTE Driver downloads and additional information are available under Downloads on our web site: www.quanmax.com.

Unpacking

When unpacking, follow these steps: 1. After opening the box, save it and the packing material for possible future shipment. 2. Remove all items from the box. If any items listed on the purchase order are missing, notify Quanmax customer service immediately. 3. Inspect the product for damage. If there is damage, notify Quanmax customer service immediately. Refer to "Warranty Policy" for the return procedure.

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class A devices.

FCC Compliance Statement for Class A Devices

The product(s) described in this user's guide has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user's guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area (domestic environment) is likely to cause harmful interference, in which case

KEMX-4030 User's Manual 10

Preface the user will be required to correct the interference (take adequate measures) at their own expense. Changes or modifications not expressly approved by Quanmax could void the user's authority to operate the equipment. NOTE The assembler of a personal computer system may be required to test the system and/or make necessary modifications if a system is found to cause harmful interference or to be noncompliant with the appropriate standards for its intended use.

Warranty Policy

Limited Warranty

Quanmax Inc.'s detailed Limited Warranty policy can be found under Support at www.quanmax.com. Please consult your distributor for warranty verification. The limited warranty is void if the product has been subjected to alteration, neglect, misuse, or abuse; if any repairs have been attempted by anyone other than Quanmax or its authorized agent; or if the failure is caused by accident, acts of God, or other causes beyond the control of Quanmax or the manufacturer. Neglect, misuse, and abuse shall include any installation, operation, or maintenance of the product other than in accordance with the user's guide. No agent, dealer, distributor, service company, or other party is authorized to change, modify, or extend the terms of this Limited Warranty in any manner whatsoever. Quanmax reserves the right to make changes or improvements in any product without incurring any obligation to similarly alter products previously purchased.

Return Procedure

For any Limited Warranty return, please contact Support at www.quanmax.com and login to obtain a Return Material Authorization (RMA) Number. If you do not have an account, send an email to [email protected] to apply for one. All product(s) returned to Quanmax for service or credit must be accompanied by a Return Material Authorization (RMA) Number. Freight on all returned items must be prepaid by the customer who is responsible for any loss or damage caused by common carrier in transit. Returns for Warranty must include a Failure Report for each unit, by serial number(s), as well as a copy of the original invoice showing the date of purchase. To reduce risk of damage, returns of product must be in a Quanmax shipping container. If the original container has been lost or damaged, new shipping

KEMX-4030 User's Manual 11

Preface containers may be obtained from Quanmax Customer Service at a nominal cost. Quanmax owns all parts removed from repaired products. Quanmax uses new and reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Quanmax repairs or replaces a product, its warranty term is not extended. Shipments not in compliance with this Limited Warranty Return Policy will not be accepted by Quanmax.

Limitation of Liability

In no event shall Quanmax be liable for any defect in hardware, software, loss, or inadequacy of data of any kind, or for any direct, indirect, incidental, or consequential damages in connection with or arising out of the performance or use of any product furnished hereunder. Quanmax's liability shall in no event exceed the purchase price of the product purchased hereunder. The foregoing limitation of liability shall be equally applicable to any service provided by Quanmax or its authorized agent.

Maintaining Your Computer

Environmental Factors

Temperature The ambient temperature within an enclosure may be greater than room ambient temperature. Installation in an enclosure should be such that the amount of air flow required for safe operation is not compromised. Consideration should be given to the maximum rated ambient temperature. Overheating can cause a variety of problems, including premature aging and failure of chips or mechanical failure of devices. If the system has been exposed to abnormally cold temperatures, allow a two-hour warm-up period to bring it up to normal operating temperature before turning it on. Failure to do so may cause damage to internal components, particularly the hard disk drive. Humidity High-humidity can cause moisture to enter and accumulate in the system. This moisture can cause corrosion of internal components and degrade such properties as electrical resistance and thermal conductivity. Extreme moisture buildup inside the system can result in electrical shorts, which can cause serious damage to the system. Buildings in which climate is controlled usually maintain an acceptable level of humidity for system equipment. However, if a system is located in an unusually

KEMX-4030 User's Manual 12

Preface humid location, a dehumidifier can be used to maintain the humidity within an acceptable range. Refer to the "Specifications" section of this user's guide for the operating and storage humidity specifications. Altitude Operating a system at a high altitude (low pressure) reduces the efficiency of the cooling fans to cool the system. This can cause electrical problems related to arcing and corona effects. This condition can also cause sealed components with internal pressure, such as electrolytic capacitors, to fail or perform at reduced efficiency.

Power Protection

The greatest threats to a system's supply of power are power loss, power spikes, and power surges caused by electrical storms, which interrupt system operation and/or damage system components. To protect your system, always properly ground power cables and one of the following devices. Surge Protector Surge protectors are available in a variety of types and usually provide a level of protection proportional with the cost of the device. Surge protectors prevent voltage spikes from entering a system through the AC power cord. Surge protectors, however, do not offer protection against brownouts, which occur when the voltage drops more than 20 percent below the normal AC line voltage level. Line Conditioner Line conditioners go beyond the over voltage protection of surge protectors. Line conditioners keep a system's AC power source voltage at a fairly constant level and, therefore, can handle brownouts. Because of this added protection, line conditioners cost more than surge protectors. However, line conditioners cannot protect against a complete loss of power. Uninterruptible Power Supply Uninterruptible power supply (UPS) systems offer the most complete protection against variations on power because they use battery power to keep the server running when AC power is lost. The battery is charged by the AC power while it is available, so when AC power is lost, the battery can provide power to the system for a limited amount of time, depending on the UPS system. UPS systems range in price from a few hundred dollars to several thousand dollars, with the more expensive unit s allowing you to run larger systems for a longer period of time when AC power is lost. UPS systems that provide only 5 minutes of battery power let you conduct an orderly shutdown of the system,

KEMX-4030 User's Manual 13

Preface but are not intended to provide continued operation. Surge protectors should be used with all UPS systems, and the UPS system should be Underwriters Laboratories (UL) safety approved.

KEMX-4030 User's Manual

14

Chapter 1

Chapter 1

Introduction

Overview

The new KEMX-4030 is a Mini-ITX form factor industrial motherboard combining the high performance Intel® Core 2 Duo 45nm processor with the high integration of the Intel® GM45/ ICH9M chipset. Featured are DDR2-667/800 SODIMM up to 4GB, Intel® Gen 5.0 Integrated Graphics engine supports DirectX 10, MPEG2, WMV9(VC-1), H.264(AVC), 18/ 24-bit dual-channel LVDS, HDMI, Gigabit Ethernet, SATA 3 Gb/s, PCIe x4 expansion slot, 12x USB 2.0, 6 COM ports with voltage support, HD audio, and keyboard/mouse. The KEMX-4030 is a compact, high performance industrial motherboard that is ideal for multimedia, gaming, digital signage and medical applications.

Checklist

1x SATA cable 1x COM port cable 1x Driver/ Manual CD 1x Quick Installation Guide 1x I/O shield 1x KEMX-4030 mini-ITX motherboard

Features

Intel® Core 2 Duo 45nm processor support Intel® GM45/ ICH9M chipset Intel® Gen 5.0 Integrated Graphics engine supports DirectX 10, MPEG2, WMV9, and H.264 VGA, 18/24-bits dual channel LVDS, Dual HMDI (optional with PCIEx16 slot) Two DDR2 SO-DIMMs up to 4GB 4x SATA 3 Gb/s, PCIe x4 slot 3 x GbEs, 12 x USB2.0, 6 x COMs, 1 x LPT, HD audio with 2W amplifier onboard Watchdog Timer, Hardware Monitor, TPM 1.2

KEMX-4030 User's Manual

15

Chapter 1

Product Specifications

KEMX-4030 CPU Support Chipset Memory BIOS Intel® Core 2 Duo (Socket P, Penryn Core) Intel® GM45 +ICH9M 2x DDR2 667/800 SO-DIMM Socket, up to 4GB AMI PnP 4MB Flash Intel® Gen 5.0 Integrated Graphics engine supports DirectX 10 18/24-bit dual-channel LVDS 2x HDMI 1x VGA 3x RJ-45, Gigabit Ethernet (2x Intel® 82574 + 1x Intel® 82567) Intel® HD Audio Codec, supports Line-in, Line-out & Microphone (VIA 1708B) Speak-out with AMP. 2x 2W 4x SATA 3Gb/s 6x COMs with +5V or +12V support (1x RS-232/422/485, 5x RS-232) 12x USB 2.0 1x Parallel port (Box Header) 1x PS/2 Keyboard connector 1x PS/2 Mouse connector 4x DI/DO TPM 1.2 ATX-24P + ATX-4P 1x PCIe x4 slot, 1x PCIe x16 slot (for KEMX-4031 only) 1-255 step, can be set with software on Super I/O Operating voltage, CPU temperature and fan speed Mini-ITX (170 x 170 mm) Operation Temp: 0ºC - 60ºC Storage Temp.: -10ºC - 85ºC Humidity: 0% - 90% CE, FCC Class A

Display

LAN Audio

Peripheral Support

TPM Power Connector Expansion Watchdog Timer Hardware Monitor Dimensions Environmental Factors Certifications

Table 1 KEMX-4030 Specification

KEMX-4030 User's Manual

16

Chapter 1

System Block Diagram

Figure 1 Block Diagram

KEMX-4030 User's Manual

17

Chapter 1

Mechanical Dimensions

Figure 2 KEMX-4030 Mechanical Dimensions

KEMX-4030 User's Manual

18

Chapter 1

Figure 3 KEMX-4031 Mechanical Dimensions

KEMX-4030 User's Manual

19

Chapter 2

Chapter 2

Hardware Settings

Overview

This chapter provides the definitions and locations of jumpers, headers, and connectors.

Jumpers

The product has several jumpers which must be properly configured to ensure correct operation.

Figure 4 Jumper Connector For a three-pin jumper (see Figure 3), the jumper setting is designated "1-2" when the jumper connects pins 1 and 2. The jumper setting is designated "2-3" when pins 2 and 3 are connected and so on. You will see that one of the lines surrounding a jumper pin is thick, which indicates pin No.1. To move a jumper from one position to another, use needle-nose pliers or tweezers to pull the pin cap off the pins and move it to the desired position.

KEMX-4030 User's Manual

20

Chapter 2

Jumper Settings and Pin Definitions

For jumper and connector locations, please refer to the diagrams below.

COM2 COM3 COM4 COM5 COM6

Figure 5 KEMX-4030 Jumper and Connector Locations

KEMX-4030 User's Manual

21

Chapter 2

COM2 COM3 COM4 COM5 COM6

Figure 6 KEMX-4031 Jumper and Connector Locations

KEMX-4030 User's Manual

22

Chapter 2

Jumper Settings

To ensure correct system configuration, the following section describes how to set the jumpers to enable/disable or change functions. For jumper descriptions, please refer to the table below. Table 2 Jumper List Label JP1 JP2 JP3 J1 PRTS1 Function Panel Power Selection Backlight Power Selection Backlight Enable Selection Clear CMOS Selection LPT port Signal / Power Selection

Table 3 JP1, Panel Power Selection Jumper 1-2 2-3 Status +3.3V +5V (Default)

DIP HEADER 3P 1R MS(P2.54,H8.38)EU

Table 4 JP2, Backlight Power Selection Jumper 1-2 2-3 Status +12V +5V (Default)

DIP HEADER 3P 1R MS(P2.54,H8.38)EU

Table 5 JP3, Backlight Enable Selection Jumper 1-2 2-3 Status Active High (Default) Active Low

DIP HEADER 3P 1R MS(P2.54,H8.38)EU

Table 6 J1, Clear CMOS Selection Jumper Open Short Status Normal Operation (Default) Clear CMOS

SMD HEADER 4P 2R MS(P2.54,H11.3)

KEMX-4030 User's Manual

23

Chapter 2 Table 7 PRTS1, LPT port Signal / Power Selection

Jumper 1 2 3 Setting 1-2 Short 1-3 Short 4-6 Short 5-6 Short 7-8 Short 7-9 Short Status Pin 4=ERR# (Default) Pin 4=+5V Pin 6=+5V Pin 6=INIT# (Default) Pin 8=SLIN# (Default) Pin 8=+5V

SMD HEADER 10P 2R MR (P2.54,H10.2)

Rear Panel Pin Assignments

Table 8 HDMI1, 2-Port HDMI Connector (KEMX-4030 only) Signal Name TMD_DATA2+ TMD_DATA2GND TMD_DATA0+ TMD_DATA0GND NC DDC_CLK GND HPDET Pin 1 3 5 7 9 11 13 15 17 19 Pin 2 4 6 8 10 12 14 16 18 Signal Name GND TMD_DATA1+ TMD_DATA1GND HDMI_TCLP HDMI_TCLN NC DDC_DATA +5V

Table 9 AUO1, 3-Port Audio phone jack Signal Name BLUE GREEN PINK LINE IN LINE OUT MIC IN

DIP AUDIO JACK 13P FR(H34.7)

Table 10 LANC 1/2/3, LAN(1-3) RJ-45 + USB Port Connector Pi Signal Pin Signal n 1 MDI[0]+ U1 +5V 2 MDI[0]U2 USB3 MDI[1]+ U3 USB+ 4 MDI[1]U4 GND 5 MDI[2]+ U5 +5V 6 MDI[2]U6 USB7 MDI[3]+ U7 USB+ 8 MDI[3]U8 GND

DIP(USB+RJ45+TRANS)HS 22P FR

KEMX-4030 User's Manual

24

Chapter 2

Table 11 KM1, PS/2 KB/MS Connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 Signal KBDAT NC GND KB5V KBCLK NC MSDAT NC GND KB5V MSCLK NC Function Keyboard Data No Connect Ground +5VSB Power Source Keyboard Clock No Connect Mouse Data No Connect Ground +5VSB Power Source Mouse Clock No Connect

DIP MINI-DIN 12P FR(MS-G,KB-P)

Table 12 VACM1, VGA Connector & RS-232/422/485 Port Connector Pin RS232

RS422 TX1 DCD, Data carrier detect RX+ 2 RXD, Receive data TX+ 3 TXD, Transmit data RX4 DTR, Data terminal ready 5 GND, ground 6 DSR, Data set ready 7 RTS, Request to send 8 CTS, Clear to send 9 RI, Ring indicator Signal Name Pin Pin Signal Name Red 1 2 Green Blue 3 4 NC GND 5 6 GND GND 7 8 GND VCC 9 10 GND NC 11 12 DDC2B data HSYNC 13 14 VSYNC DDC2B clock 15 DSUB 24P MR+FR,5R,COLOR(COM+VGA)EU RS485 Half Duplex DATAN/A DATA+ N/A

DB9

DB-15

KEMX-4030 User's Manual

25

Chapter 2

Main Board Pin Assignments

Table 13 Internal Connector List Label ATXP1 ATXP2 JP4 DIO1 COM2 - 6 FAN1& FAN2 J2 J3 LVDS1 USBC1,USBC2,USBC3 CF1 (Optional) AUD2,AUD3 PRT1 SATA1~4 DDRII1,2 JD1 JD2 PCIE2 PCIE1 Function ATX 24-pin Power Connector ATX 4-pin +12V Input Power Connector Panel Backlight Wafer Digital Input / Digital Output Pin Header COM2 - COM6 Box Headers 3-Pin FAN Connectors Front Panel 1 Pin Header Front Panel 2 Pin Header 2 Channel LVDS connector USB Pin Headers Compact Flash type I/II connector Audio AMP Output wafer connectors LPT port Box header Serial ATA connectors DDR2 Memory SO-DIMM sockets Debug Port (for test only) Debug Port (for test only) PCIE slots for x4 PCIE slots for x16 (KEMX-4031 only)

Table 14 ATXP1, ATX 24-Pin Power Connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 Signal +3.3V +3.3V GND +5V GND +5V GND POWER OK +5VSB +12V +12V +3.3V Pin 13 14 15 16 17 18 19 20 21 22 23 24 Signal +3.3V -12V GND PS_ON GND GND GND -5V +5V +5V +5V GND

DIP POWER JACK 24P 2R FS

KEMX-4030 User's Manual

26

Chapter 2 Table 15 ATXP2, 4-Pin +12V Input Power Connector Pin 1 2 3 4 Signal Name GND GND +12V +12V

DIP POWER JACK 4P 2R FS

Table 16 JP4, Panel Backlight Wafer

Pin 1 2 3 4 5 6 7 Signal Name NC BL_ADJ GND +5V / +12V * +5V / +12V * GND BL_EN / BL_EN# **

HEADER,7P,1R,MS(P1.25,H5.2)

* The function can be selected by JP2 ** The function can be selected by JP3 Table 17 DIO1, Digital Input / Digital Output Pin Header

Pin 1 3 5 7 9 Signal Digital Output 0 Digital Output 1 Digital Output 2 Digital Output 3 +5V Pin 2 4 6 8 10 Signal Digital Input 0 Digital Input 1 Digital Input 2 Digital Input 3 GND

SMD HEADER 10P 2R MS(P2.0,H6.0)

Table 18 CN2 - CN6, COM2 - COM6 RS-232 Box Header

Pin 1 2 3 4 5 6 7 8 9 10 Signal DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready GND, ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator NC

SMD HEADER 10P 2R MS(P2.0,H7.6)

KEMX-4030 User's Manual

27

Chapter 2 Table 19 FAN1& FAN2, 3-Pin FAN Connector

Pin 1 2 3 Signal GND +12V FAN_RPM

DIP HEADER 3P 1R MS(P2.54,H8.18)EU

Table 20 J2, Front Panel 1 Pin Header

Pin 1 3 5 7 Signal Reset Button + Reset Button HDD LED + HDD LED Pin 2 4 6 8 Signal Speaker + NC NC Speaker -

SMD HEADER 8P 2R MR (P2.54,H10.2) Pins 2, 8: External Speaker wire, Pins 6-8 shorted: Internal Speaker Enable (default)

Table 21 J3, Front Panel 2 Pin Header

Pin 1 3 5 7 9 Signal Power LED + NC Power LED Keyboard Lock GND Pin 2 4 6 8 10 Signal Power Button + Power Button NC SMBus Data SMBus Clock

SMD HEADER 10P 2R MR(P2.54,H10.2)

Table 22 LVDS1, LVDS Panel Connector

Signal Name NC Panel Power* TxclkBTxclkB+ GND TxoutB0TxoutB0+ TxoutB1TxoutB1+ TxoutB2TxoutB2+ TxoutB3TxoutB3+ GND I2C_Clock Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Name NC Panel Power* TxclkATxclkA+ GND TxoutA0TxoutA0+ TxoutA1TxoutA1+ TxoutA2TxoutA2+ TxoutA3TxoutA3+ GND I2C_Data

SMD HEADER 30P 2R MS(P1.25,H4.8) * The function can be selected by JP1 KEMX-4030 User's Manual 28

Chapter 2

Table 23 USBC1-C3,USB2.0 Port 7-12 Pin Header Pin 1 3 5 7 9 Signal Name +5V USB7 (9,11) USB7(9,11)+ GND KEY Pin 2 4 6 8 10 Signal Name +5V USB8 (10,12) USB8 (10,12) + GND GND

SMD HEADER 9P 2R MS(P2.0,H5.5)

Table 24 CF1, CF Type II Connector (Optional)

Signal Name GND IDE Data 3 IDE Data 4 IDE Data 5 IDE Data 6 IDE Data 7 IDE Chip select 1# GND GND GND GND GND +5V GND GND GND GND SDA2 IDE Address 1 IDE Address 0 IDE Data 0 IDE Data 1 IDE Data 2 IOIS16# GND Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Pin 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Signal Name GND IDE Data 11 IDE Data 12 IDE Data 13 IDE Data 14 IDE Data 15 IDE Chip select 3# GND IDEIOR# IDEIOW# +5V IDEIRQ +5V PCSEL NC Reset IDE IDEIORDY DREQ DACK# IDE activity PDIAG# IDE Data 8 IDE Data 9 IDE Data 10 GND

SMD HEADER 50P 2R MR(P1.27,H7.9)

Table 25 AUD2, Audio AMP Right Output Wafer Pin 1 2 Signal Name Speaker+ Speaker-

SMD WAFER 2P 1R MS(P2.0,H6.5)

KEMX-4030 User's Manual

29

Chapter 2 Table 26 AUD3, Audio AMP Left Output Wafer Pin 1 2 Signal Name Speaker+ Speaker-

SMD WAFER 2P 1R MS(P2.0,H6.5)

Table 27 SATA1-4, SATA Connector Pin Signal Name 1 GND 2 TX+ 3 TX4 GND 5 RX6 RX+ 7 GND

DIP HEADER 7P 1R MS(P1.27,H8.4)EU

Table 28 PCIE2, PCIe x 4 Slot

PIN A32 A31 A30 A29 A28 A27 A26 A25 A24 A23 A22 A21 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 SIGNAL RESERVED GND PERN3 PERP3 GND GND PERN2 PERP2 GND GND PERN1 PERP1 GND RESERVED GND PERN0 PERP0 GND REFCLK+ REFCLKGND PERST# +3.3V +3.3V JTAG5 JTAG4 JTAG3 JTAG2 GND +12V +12V PRSNT1# PIN B32 B31 B30 B29 B28 B27 B26 B25 B24 B23 B22 B21 B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 SIGNAL GND PRSNT2# RESERVED GND PETN3 PETP3 GND GND PETN2 PETP2 GND GND PETN1 PETP1 GND PRSNT2# GND PETN0 PETP0 GND RESERVED WAKE# +3.3VAUX JTAG1 +3.3V GND SMDATA SMCLK GND RESERVED +12V +12V

DIP HOUSING 64P 4R FS(P1.00,H11) KEMX-4030 User's Manual 30

Chapter 2

Table 29 PRT1, LPT Port Box Header PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 SIGNAL #STROBE DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 #ACK BUSY Paper Empty SELECT PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 SIGNAL #AFD #ERROR/ +5V (Selected by Jumper) #INIT/ +5V (Selected by Jumper) #SLIN/ +5V (Selected by Jumper) GND GND GND GND GND GND GND GND N.C.

SMD HEADER 26P 2R MS(P2.0,H7.6)

KEMX-4030 User's Manual

31

Chapter 3

Chapter 3

System Installation

Processor Installation

Processor Handling

Carefully follow the steps below in order to prepare the CPU for installation: 1. Remove processor from packaging. 2. Handle the CPU by grasping the substrate edges only with thumb and forefinger. CAUTION

DO NOT TOUCH PROCESSOR CONTACTS TO PREVENT DAMAGING THE CPU.

Installing the CPU

Carefully follow the steps below in order to install the CPU: 1. Check and confirm that you are installing the correct CPU type. 2. Using a screwdriver, disengage (open) the socket actuator, as shown in figure below.

Figure 7 Disengage the socket actuator

3.

Align the gold triangle on the CPU with the similar marking on the socket (see

32

KEMX-4030 User's Manual

Chapter 3 Figure below). If the processor does not drop completely into the socket, turn the socket actuator to the open position until the processor drops completely in.

Note: You should not have to press down on the processor. If the processor does not drop completely into the socket, turn the actuator until the processor drops completely in.

Figure 8 CPU alignment in Micro-FCPGA Socket (Socket P)

4.

While gently holding the processor down with your finger, secure the processor in the socket with a screwdriver by turning the socket actuator to the closed position:

Figure 9 Secure the processor in the socket

KEMX-4030 User's Manual

33

Chapter 3

Removing the CPU:

To remove the CPU, reverse the installation steps. 1. Before removing the CPU, turn off the system power and wait for about 20 minutes until the heat radiation plate of the cooling fan and the CPU cools down. 2. To remove the CPU, follow Step 2 of Installing the CPU above. 3. Remove the CPU by grasping the substrate edges only with thumb and forefinger and lifting it out with a purely vertical motion. WARNING

The CPU and the heatsink may be hot and could cause burns.

Cooler Installation

The system must not be operated without a cooler (heat sink and fan) to provide the necessarily cooling. Install the cooling unit supplied as follows: CAUTION

Make sure that good thermal contact is made between the processor and heat sink. Insufficient contact or incorrect use of heat sink, fan, or thermal compound can cause the processor to overheat, which may crash the system or cause permanent damage to the CPU.

1. 2.

3.

Install the correct CPU as described above. Align the screw holes of the heatsink rear retention bracket with the mounting holes on the underside of the motherboard, located at the four corners of the CPU location. Insert into the holes and turn the motherboard over. Place the heatsink/fan assembly on top of the CPU with the cooling fins aligned with the memory slots. This will allow the fan to provide cooling the Northbridge heatsink. Align the screws with the screw holes of the rear retention bracket.

Note: Be careful not to touch the thermal pad on the underside of the heatsink. This pad is made of thermal compound and is deformable. It is designed to make optimal thermal contact with the CPU. No additional thermal compound is required.

4.

Tighten each screw halfway to secure the cooler assembly to the motherboard. Then gradually tighten all four screws. Do not fully tighten the first screw before partially tightening the other screws as this may apply uneven pressure to the

34

KEMX-4030 User's Manual

Chapter 3 CPU, causing damage.

Note: In order to operate the KEMX-4030 without a fan, the cooling solution must be integrally designed with the chassis. Contact Quanmax for more information on fan less operation.

Memory Module Installation

Carefully follow the steps below in order to install the SO-DIMMs:

1. To avoid generating static electricity and damaging the SO-DIMM, ground yourself by touching a grounded metal surface or use a ground strap before you touch the SO-DIMM. Do not touch the connectors of the SO-DIMM. Dirt or other residue may cause a malfunction. To make sure the correct DDR2 SO-DIMM notches should match with the DDR2 SO-DIMM. Holds the SO-DIMM aligned with the memory socket of the board and inserts it into the socket. Fully insert the module into the socket until a "click" is heard.

2. 3. 4. 5.

Figure 10 Memory Installation

Removing a DIMM:

To remove the SO-DIMM, use your fingers to carefully push away the tabs that secure either side of the SO-DIMM. Lift it out of the socket. Make sure you store the SO-DIMM in an anti-static bag. The socket must be populated with memory modules of the same size and manufacturer.

NOTE For enabling iTPM function, the 1 memory slot should be always populated.

st

KEMX-4030 User's Manual

35

Chapter 3

KEMX-4030 User's Manual

36

Chapter 3

Expansive Interfaces

The board comes with one PCIe x16 slot, one PCIe x4 slot and Compact Flash Type II interfaces.

1x PCIe x16 slot

(for KEMX-4031 only)

1x PCIe x4 slots

Figure 11 Expansive Interfaces

NOTE

When adding or removing expansion cards, make sure that you unplug the power supply first. Meanwhile, read the documentation for the expansion card to configure any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration.

KEMX-4030 User's Manual

37

Chapter 4

Chapter 4

AMI BIOS Setup

Overview

This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact Quanmax.

NOTE: The BIOS menus and selections for your product may vary from those in this chapter. For the BIOS manual specific to your product, please contact Quanmax.

AMI's ROM BIOS provides a built-in Setup program, which allows the user to modify the basic system configuration and hardware parameters. The modified data will be stored in a battery-backed CMOS, so that data will be retained even when the power is turned off. In general, the information saved in the CMOS RAM will not need to be changed unless there is a configuration change in the system, such as a hard drive replacement or when a device is added. It is possible for the CMOS battery to fail, which will cause data loss in the CMOS only. If this happens you will need to reconfigure your BIOS settings.

KEMX-4030 User's Manual

38

Chapter 4

Main Menu

The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the "<" and ">" cursor keys to navigate between menu screens.

Table 30 BIOS Main Menu

BIOS SETUP UTILITY Main System Time System Date > SATA1 > SATA2 > SATA3 > SATA4 > Onboard CF > System Information Advanced Boot Chipset Power Security Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time. Exit

[10:18:15] [Mon 05/04/2009] :[Maxtor 6V160E0] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected]

<> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Below table is described for SATA1-4 and onboard CF setting.

Table 31 SATA and onboard CF Device Setting Menu

BIOS SETUP UTILITY Main SATA1 Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. LBA/ Large Mode DMA Mode S.M.A.R.T Advanced Boot Chipset Power Security Exit

:Hard Disk :Maxtor 6V160E0 :160.0GB :Supported :16 Sectors :4 :MultiWord DMA-2 :Ultra DMA-6 :Supported [Auto] [Auto] [Auto]

Select the type of device connected to the system. <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

LBA/ Large Mode [Auto] Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to

KEMX-4030 User's Manual 39

Chapter 4 Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Options: Disabled, Auto DMA Mode [Auto] Setup DMA Mode. S.M.A.R.T [Auto] SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows AMIBIOS to use the SMART protocol to report server system information over a network. Options: Auto, Disabled, Enabled

Table 32 System Information

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

AMIBIOS BIOS Version EC Firm Version

: MX43R100 :3.01 <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

Processor Intel(R) CPU (TM) 2 Duo T9400 @2.53GHz Speed :2533 MHz Count :1 System Memory Size :989MB

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Advanced Menu

Table 33 Advanced Menu

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

Advanced Settings

Warning:

Setting wrong values in below sections may cause system to malfunction.

<> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

> SuperI/O Configuration > OnBoard Peripherals Configuration > Hardware Health Configuration > ITPM function

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Press <Enter> to select a sub-menu for detailed options.

KEMX-4030 User's Manual 40

Chapter 4

Table 34 Onboard I/O Configuration

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security The Port1 address: 3F8 IRQ: 4 Exit

Configure Ite8782 Super IO Chipset Serial Port1 RS232/422/485 Serial Port1 RI/12V/5V Serial Port1 DCD/12V/5V Serial Port2 Serial Port2 RI/12V/5V Serial Port2 DCD/12V/5V Serial Port3 Serial Port3 RI/12V/5V Serial Port3 DCD/12V/5V Serial Port4 Serial Port4 RI/12V/5V Serial Port4 DCD/12V/5V Serial Port5 Serial Port5 RI/12V/5V Serial Port5 DCD/12V/5V Serial Port6 Serial Port6 RI/12V/5V Serial Port6 DCD/12V/5V Parallel Port Parallel Port Mode

[Enabled] [RS232] [RI] [DCD] [Enabled] [RI] [DCD] [Enabled] [RI] [DCD] [Enabled] [RI] [DCD] [Enabled] [RI] [DCD] [Enabled] [RI] [DCD] [Enabled] [Normal]

<> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Serial Port1 [Enabled] Options: Enable, Disabled RS232/422/485 [RS232] Options: RS232, RS422, RS485 (Half only) Serial Port1 RI/12V/5V [RI] Options: RI, 12V, 5V Serial Port1 DCD/12V/5V [DCD] Options: DCD, 12V, 5V Serial Port2-6 [Enabled] Options: Enable, Disabled Serial Port2-6 RI/12V/5V [RI] Options: RI, 12V, 5V Serial Port2-6 DCD/12V/5V [DCD] Options: DCD, 12V, 5V Parallel Port [Enabled] Options: Enable, Disabled Parallel Port Mode Options: Normal, EPP, ECP, EPP+ECP

KEMX-4030 User's Manual 41

Chapter 4

Table 35 OnBoard Peripherals Configuration Settings

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Options Disabled 12 USB Ports <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit Exit

OnBoard Peripherals Configuration Settings [12 USB Ports] USB Controller [Auto] Legacy USB Support LAN1 Controller LAN2 Controller LAN3 Controller LAN3 Boot LAN3 Wake Up From S5 HDA Controller > Watch Dog Configuration [Enable] [Enable] [Enable] [Disabled] [Disabled] [Enable]

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

USB Controller [12 USB Ports] Options: Disabled, 12 USB Ports Legacy USB Support [Auto] Options: Disabled, Enabled, Auto LAN1 Controller [Enabled] Options: Enabled, Disabled LAN2 Controller [Enabled] Options: Enabled, Disabled LAN3 Controller [Enabled] Options: Enabled, Disabled LAN3 Boot [Disabled] Options: Enabled, Disabled LAN3 Wake Up From S5 [Disabled] Options: Enabled, Disabled HDA Controller [Enabled] Options: Enabled, Disabled Watch Dog Configuration [Disabled] Options: Enabled, Disabled If the value is Enabled. Watch Dog Timer Select the timer level form 20 to 255 sec.

KEMX-4030 User's Manual

42

Chapter 4

Table 36 Hardware Health Configuration

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

Hardware Health Configuration CPU Warning Temperature CPU Shutdown Temperature CPU Temperature System Temperature CPU Fan Speed System Fan Speed CPU Voltage DDR2 Voltage 1.05V 1.50V

[Disabled] [Disabled] :57°C/ 134°F :43°C/ 109°F :2354 RPM :6490 RPM :1.136 V : 1.8452V : 1.0452V :1.4657 V

Disabled 80°C 85°C 90°C 95°C <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

CPU Warning Temperature Options: Disabled, 80°C/176°F, 85°C/185°F, 90°C/194°F, 95°C/203°F CPU Shutdown Temperature Options: Disabled, 80°C/176°F, 85°C/185°F, 90°C/194°F, 95°C/203°F

Table 37 Trusted Computing

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

ITPM Function TCG/TPM SUPPORT

[NO]

Enable/ Disable TPM TCG (TPM 1.1/1.2) supp in BIOS <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

TCG/TPM SUPPORT [No] Options: No, Yes If the value is Yes. Execute TPM Command [Don't change] Options: Don't change, Disabled, Enabled

KEMX-4030 User's Manual

43

Chapter 4

Boot Menu

Table 38 Boot Menu

BIOS SETUP UTILITY Main Boot Settings > Boot Device Priority >Hard Disk Drivers Quick Boot Bootup Num-Lock Wait For 'F1' If Error Hit 'DEL'Message Display [Enabled] [ON] [Enabled] [Enabled] <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit Advanced Boot Chipset Power Security Exit

Specifies the Boot Device Priority sequence.

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Boot Device Priority Specifies the Boot Device Priority sequence. Hard Disk Drivers Specifies the Boot Device Priority sequence from available Hard Drives. Quick Boot [Enabled] Enabling this item allows BIOS to skip some Power On Self Tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Options: Disabled, Enabled Bootup Num-Lock [On] Allow you to select the power-on state for the NumLock. Options: Off, On Wait for `F1' If Error [Enabled] When set to Enabled, the system waits for F1 key to be pressed when error occurs. Options: Disabled, Enabled Hit `DEL' Message Display [Enabled] When set to Enabled, the system displays the message `Press DEL to run Setup' during POST. Options: Disabled, Enabled

KEMX-4030 User's Manual

44

Chapter 4

Chipset Menu

Table 39 Chipset Menu

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

Advanced Chipset Settings

Warning:

Setting wrong values in below sections may cause system to malfunction.

[IDG] [Enabled, 32MB] [DVMT Mode] [256 MB] [Disabled]

Select which graphics controller to use as the primary boot device. <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

Boot Graphics Adapter Priority Internal Graphics Mode Select DVMT Mode Select DVMT/FIXED memory PAVP Mode

[CRT] Boot Display Device [1024x768 18Bit 1C] Flat Panel Type [2.5] Panel Backlight Voltage V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Boots Graphic Adapter Priority [IGD] Select which graphics controller to use as the primary boot device. Options: IGD, PEG/IGD, Internal Graphics Mode Select [Enabled 32MB] Select the amount of system memory used by the Internal graphics device. Options: Disabled, Enabled 32MB, Enabled 64MB, Enabled 128MB DVMT Mode Select Options: DVMT Mode DVMT/FIXED Memory [256MB] (This setting is only for WinXp) Options: 128MB, 256MB, Maximum DVMT PAVP Mode [Disabled] PAVP (Protected Audio Video Path) is a feature to ensure a robust and secure content protection path for high-definition video playback. Options: Disabled, Lite, High Boot Display Device [CRT] Options: CRT, SDVO (HDMI), CRT+SDVO, LVDS, CRT+LVDS Flat Panel Type [1024x768 18Bit 1C] Options:

800x600 18 Bit 1CH 1024x768 18 Bit 1CH 1024x768 24 Bit 2CH 1600x1200 24 Bit 2CH 1920x1080 24 Bit 2CH 1920x1200 24 Bit 2CH

Panel BackLight Voltage [2.5] Options: Min 0.0V, Max: 5.0V

KEMX-4030 User's Manual

45

Chapter 4

Power Menu

Table 40 Power Menu

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

Power Management Setting ACPI Aware O/S Suspend mode USB Device Wakeup From S3/S4 Resume On RTC Alarm Ring Control Restore on AC Power Loss by IO

[Yes] [S3 (STR)] [Disabled] [Disabled] [Disabled] [Power Off]

Enable/ Disable ACPI support for Operating System. <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

ACPI Aware O/S [Yes] Enable/ Disable ACPI support for Operating System. Yes: If OS supports ACPI, No: IF OS Does not support ACPI. Suspend mode [S3(STR)] Options: S1 (POS), S3 (STR) USB Device Wakeup From S3/S4 [Disabled] Enable/ Disable USB Device Wakeup From S3/S4 Options: Disabled, Enabled Resume On RTC Alarm [Disabled] Options: Disabled, Enabled, If the value is Enabled. RTC Alarm Date (Days) [Every Day] RTC Alarm Time [00:00:00] Ring Control [Disabled] Options: Disabled, Enabled Restore On AC Power Loss by IO [Power Off] Options: Power Off, Power On, Last State KeyIn "+"/"-" to select Use [ENTER], [TAB] or [SHIFT+TAB] to select a field Use [+] or [-] to configure system time

KEMX-4030 User's Manual

46

Chapter 4

Security Menu

Table 41 Security Menu

BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit

Security Setting Supervisor Password :Not Installed User Password :Not Installed Change Supervisor Password Change User Password

Install or Change the password.

<> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen displays the default Not Installed. After you have set a password, this item displays Installed. Change User Password Select this item to set or change the user password. The User Password item on top of the screen displays the default Not Installed. After you have set a password, this item displays Installed.

KEMX-4030 User's Manual

47

Chapter 4

Exit Menu

Table 42 Exit Menu

BIOS SETUP UTILITY Main Exit Setting Save Changes and Exit Discard Changes and Exit Discard Changes Load Optimal Defaults Load Failsafe Defaults Advanced Boot Chipset Power Security Exit

Exit System Setup after saving the changes. F10 key can be used for this operation. <> Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

Save Changes and Exit Exit system setup after saving the changes. Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit. Discard Changes and Exit Exit system setup without saving any changes. Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting. Discard Changes Discards changes done so far to any of the setup values. This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears. Select [Yes] to discard any changes and load the previously saved values. Load Optimal Defaults Load Optimal Default values for all the setup values. This option allows you to load optimal default values for each of the parameters on the Setup menus, which will provide the best performance settings for your system. The F9 key can be used for this operation. Load Failsafe Defaults Load Optimal Default values for all the setup values. This option allows you to load failsafe default values for each of the parameters on the Setup menus, which will provide the most stable performance settings. The F8 key can be used for this operation.

KEMX-4030 User's Manual 48

Chapter 5

Chapter 5

Driver Installation

If your KEMX-4030 does not come with an operating system pre-installed, you will need to install an operating system and the necessary drivers to operate it. After you have finished assembling your system and connected the appropriate power source, power it up using the power supply and install the desired operating system. You can download the drivers for the KEMX-4030 from the Quanmax website at www.quanmax.com and install as instructed there. For other operating systems, please contact Quanmax.

NOTE When the system reboots without connecting the CRT, there might be no image on screen when you insert the CRT/VGA cable. Please pressing <Ctrl>+<Alt>+<F1> simultaneously to show the image on screen.

KEMX-4030 User's Manual

49

Chapter 6

Chapter 6

DIO KIT User Guide

DIO KIT User Guide

============================================ The purpose of this document is to provide detail instruction on how to install and utilized the Quanmax DIO Tool. **Warning: The program is platform specific. Therefore, do not use the DIO Tool to other platform to prevent adverse effect.

How to install the test program:

1. Go in to the "DIO KITS" folder. Double Click on the DIO installation program to start the installation.

The installation program name will vary according to the platform which it applied to. For example, if the platform name is KEMX-4030, the installation program will be name as "DIO Tool for KEMX-4030.exe". As the .NET Framework 2.0 is a prerequisite, the installation program will prompt to install .NET Framework installation first should the .NET Framework 2.0 is not installed.

KEMX-4030 User's Manual

50

Chapter 6

The .NET Framework 2.0 installation would take a couple minutes to finish.

2. Click "Next" to agree to start installation program

KEMX-4030 User's Manual

51

Chapter 6

3. After enter the path where you wish to install the DIO Test Package, Click "Next" to agree to continue the installation process

4. Click "Next" to agree all setting made and start installation process

KEMX-4030 User's Manual

52

Chapter 6

5. After the installation process is complete, click "Close" to close down the installation program

6. Installation is now complete.

How to run the test program:

1. Click on "Start"->"All Programs"->"Quanmax DIO Tool"->"DIO TOOL" to start the DIO test program

2. The test tool is launch. All output will be set to low as default value when program initialized. Click on "Switch Output" button can switch the corresponding output. The input readings will only be update by hitting the "Read Input" button.

KEMX-4030 User's Manual

53

Chapter 6

CN3 to DIO Program look up table: 1 3 Pin # DIO Test Pin # DIO Test Output #1 Output #2 2 Input #1 4 Input #2

5

7 Output #4 8 Input #4

Output #3 6 Input #3

How to uninstall the test program:

1. From Control Panel, select the "Add or Remove Program". 2. Select the "Quanmax DIO Tool", click on "Remove" button to start the uninstall process

3. Click on "Yest" button to confirm the removal of the DIO Tool Kit.

KEMX-4030 User's Manual

54

Chapter 7

Chapter 7

WatchDog Timer Sample Code

//========================================================== // The Watchdog Timer sample code in C format. // User could user Turbo C 3.0 to compile the code . //========================================================== int WaitIBF(){ int STATUS=0; STATUS=inp(0x66); delay(100); while((STATUS&0x02)!=0){ STATUS=inp(0x66); delay(100); } return 0; } int main(){ WaitIBF(); outp(0x66,0x81); WaitIBF(); outp(0x62,0x3e); WaitIBF(); outp(0x62,0x14);//Enter value of the time you wish to set. //The value need to be 20 second and above. //Here is set to 20 Sec(0x14). WaitIBF(); outp(0x66,0x81); WaitIBF(); outp(0x62,0x3d); WaitIBF(); outp(0x62,0x01); return 0; }

KEMX-4030 User's Manual

55

Information

Microsoft Word - KEMX-4030_manual_02012010.doc

55 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

640992


Notice: fwrite(): send of 197 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531