Read Ramsey Electronics 2012 Catalog text version

46

Data Programming

KIT

Wired & Tested

PIC Programmer Board

Configurable 40 pin ZIF socket! Supports multiple PIC controllers! DB9 serial interface for PC's! Includes PICprog2006 software!

SPECIFICATIONS PIC10F200, PIC12C508A, PIC12CE518, PIC12F629, PIC12F675, PIC16F54, PIC16F84A, PIC16F870, PIC16F871, PIC16F872, PIC16F873, PIC16F874, PIC16F876, PIC16F877, PIC16F627, PIC16F627A, PIC16F628, PIC16F628A, PIC16F648A, PIC16F630, PIC16F676, PIC18F2550, etc. DB9 12-15VDC, 300mA 5.23" x 2.57" x .79"

Program Your Own Flash Microcontrollers!

This multifunctional programmer for PIC microcontrollers will let you take advantage of their flexibility. Supported Controllers: You can reprogram them up to 1000 times to perform different functions, upgrade device firmware, or just play! When using this programmer, code can be created in any ASCII word processor (i.e. notepad) or using Microchip's MPLAB development package (available at www.microchip.com). After writing the code and compiling, your code can be written directly to the microconPower supply: troller! The ICSP function allows you to reprogram controllers still in-use/powered by another Dimensions: board by simply connecting the chip to the ICSP bus on the programmer!

Serial Connection:

All the software you need to get started is included and with a basic knowledge of ASM and this kit, the possibilities are endless! To get more hands-on training and experience with PIC controllers, check out the K8048 programmer and experimenters board above, it gives you all the programming capabilities plus extra onboard experimentation capabilities. From Velleman. Note: this product requires a standard RS232 serial connection, and is NOT compatible with some USB to RS232 serial adapters or converters.

K8076 VM134 AC125

PIC Programmer Board Kit PIC Programmer Board, Factory Assembled & Tested 110VAC Power Supply KIT

$47.95 $74.95 $9.95

PIC Programmer & Experimenter

Supports 8, 14, 18, & 28 pin PICs Includes a PIC16F627 Microcontroller! On-board programming switches and LEDs! Software included!

Wired & Tested

Don't Just Program Them... Learn All About Them!

Unlike the stand-alone programmer K8076 above, this programmer also acts as an advanced experimenters board for PIC microcontrollers. Separate 8, 14, 18, and 28 pin sockets accommodate a wide variety of controllers. This eliminates the need for patching a universal ZIF socket.

SPECIFICATIONS PIC12F629, PIC12F675, PIC16C83, PIC16CR83, PIC16F83, PIC16C84, PIC16CR84,PIC16F84, PIC16F84A, PIC16F870, PIC16F871, PIC16F872, PIC16F873, PIC16F873A, PIC16F874, PIC16F874A, PIC16F876, PIC16F876A, PIC16F877(A)(ICSP only), PIC16F627, PIC16F627A, PIC16F628, PIC16F628A, PIC16F648A, PICF630, PIC16F676, PIC16F818, PIC16F819, etc. DB9 12-15VDC, 300mA 5.75" x 4" x .79"

Supported Controllers:

In addition, programming switches and LED status and feedback indicators help you with your programming, so there's no need to move the PIC to another board to test it. This makes the K8048 a great teaching tool for PIC programming. Also includes a standard PIC 16F627 PIC to experiment with over and over again! Code can be created in any ASCII word processor (i.e. notepad) or using Microchip's MPLAB development package (available at www.microchip.com). After writing and compiling, your code can be written directly to the microcontroller! The ICSP function allows you to reprogram controllers still in-use/powered by another board by simply connecting the chip to the ICSP bus on the programmer!

Serial Connection: Power supply: Dimensions:

All the software you need to get started is included, and with a basic knowledge of ASM and this kit, the possibilities are endless! Check out the screen shot of the included software, which is compatible with Win95/98/ME/NT/2K/and XP. If you are looking for a quick PIC microcontroller programmer only, without the advanced experimenter features, check out the K8076 below. From Velleman. Note: this product requires a standard RS232 serial connection, and is NOT compatible with some USB to RS232 serial adapters or converters.

K8048 VM111 AC125

PIC Programmer & Experimenters Board Kit PIC Programmer & Experimenters Board, Factory Assembled & Tested 110VAC Power Supply

Wired & Tested

$34.95 $69.95 $9.95

PIC-PLC Application Mini Module

Integrate PIC Micros Without Building The Hardware!

9 Free programmable I/O's! Includes a PIC 16F630 microcontroller! On-board buzzer and LED for signal indication! Includes an on-board 2A relay!

This "cute" little module is designed for the hobbyist that would like to control their project or application with a custom PIC microcontroller but really doesn't want to build the hardware associated with it, whether it be the lack of time, ability... or both! The module (which is less than 3" x 3") is self enclosed, factory assembled and tested, and ready for your integration into your application. It even includes a PIC16F630 micro on board! It features 4 buffered voltage sensing inputs from 5-24VDC at 47K. Output wise, it provides Power Supply: 4 NPN open collector outputs plus a relay output. The relay can be directly driven by an Inputs: output and provides NO/NC contacts rated at 2 amps. Outputs:

SPECIFICATIONS 12VDC unregulated, 100mA (4) voltage sensing inputs, 5-24VDC (4) NPN transistor outputs, open collector, sink outputs 12V driven from outputs, NO/NC contacts rated at 2A Fixed 4MHz internal oscillator 3.15" x 2.75" x .98"

Besides the built-in relay, the module also contains dual LED indicators for power Output Relay: supply and relay operation as well as an on-board buzzer for programmable audible indication. A 13 pin plug-in Euroblock style connector is also provided for easy conMCU Speed: nection and removal to your application or circuit. The socket mounted on-board Dimensions: PIC can be removed for programming with the K8076, VM134, or any other suitable programmer. It can also be programmed in-circuit via the plug-in programming connector. If you are looking to integrate PIC controlled functions to your application and just don't have the time to build up the circuit, this module is for you! Does not include software development tools or assemblers (normally these are provided with the PIC programmers and experimenters). Factory assembled and tested for immediate use. From Velleman.

VM142

PIC-PLC Application Mini Module, Factory Assembled & Tested

$52.95

Shop online at www.ramseykits.com Call Toll Free 800-446-2295

Data Programming

47

KIT

Wired & Tested

USB Experimenter's Interface Board

5 digital input channels! 8 digital output channels! 2 analog inputs and outputs! Diagnostic software & DLL included!

Learn How USB Works... Then Put It To Work!

Not so long ago the universal answer for external control from a PC was the serial port. It was easy, it was simple, and you really couldn't mess anything up! Then came parallel port outputs for higher speed connections and transfers. What came next? The "Universal Serial Bus" or USB. Everything has gone to USB connections due to the speed, reliability, and plug and play simplicity. In fact, go to an office store and try to find a printer with a parallel port these days! They call those legacy products... and legacy technology! Well it's time to get hands-on experience developing USB interfaces! This board provides everything needed. All communication routines are contained in a Dynamic Link Library (DLL) that is provided along with Windows based diagnostic software. You can also write custom Windows applications in Delphi Visual Basic, C++, or any other 32-bit Windows development tool that supports calls to a DLL. A variety of inputs and outputs are provided that are controlled and monitored with the diagnostic software. Learn USB the fun way, and watch it work! From Velleman. (No dreaded blue screen of death with this one!)

5 Digital Inputs: 2 Analog Inputs: 8 Digital Outputs: 2 Analog Outputs: Gen Conv. Time: Power Supply: Software: PC Requirements: Dimensions:

SPECIFICATIONS 0=ground; 1=open, on board test buttons Attenuation and amplification, internal test Open collector, 50V/100mA, LED indication 0-5V at 1K,m PWM 0-100% open collector 20ms per command Through USB, 70mA approx. Diagnostic Windows software with DLL Pentium class or higher, USB1.0 or higher, Win98SE, WinME, Win2K, XP 5.7" x 3" x .8"

K8055 VM110

USB Experimenter's Interface Board Kit USB Experimenter's Interface Board, Factory Assembled & Tested

$49.95 $82.95

Wired & Tested

4-Channel USB Relay Board With 6-Channel A/D Interface

Individually configurable I/O channels! Compatible with Maxim-Dallas DS18B20 1-Wire temperature sensors! USB control for versatile custom programming!

Supply Voltage: Number of Relays: Number of I/O Channels: Relay Rating: SPECIFICATIONS 12VDC (For Relay Operation Only) 4 6 10A / 100V AC or 24VDC ( 5A / 220VAC) (Resistive Loads) 10-bit 4.11" x 2.14"

The Ultimate USB Interface And Controller!

This professional quality USB relay controller and data acquisition module allows computer controlled switching of external devices, plus full bi-directional communication with the exterA/D Converter Resolution: nal world using the USB port of Dimensions: your computer. The perfect solution for Data Acquisition applications! The controller is very flexible and can be used for a wide range of custom applications, including weather stations, temperature monitoring, logging and control, etc.

SUPPORTED COMMANDS RELx.ON RELx.OFF RELx.TOGGLE RELx.GET RELS.ON RELS.OFF RELS.GET CHx.ON CHx.OFF CHx.TOGGLE CHx.GET CHx.SETMODE It is compatible with both Windows and Apple OS X, as well as various Linux flavors. When you plug CHx.GETANALOG it into your computer, it appears as a USB CDC (Communications Device Class) device that creates a CHx.GETTEMP Virtual Serial (COM) port allowing easy communication with the board through any programming CHS.ON language that supports serial communications (VB, VB.NET, C#, C, C++, Perl, Java, etc). A complete CHS.OFF set of easy to use commands are available for complete control of all relays, I/O channels and sen- CHS.GET CHS.SETTEMPRES sors! SETID ABOUT The controller also features four onboard relay outputs with a current rating of 10A each. Also

onboard is a 6-channel Input/Output interface, with each channel individually configurable as Digital Input, Digital Output, Analog Input (10-bit Resolution), or Temperature Sensor (Dallas-Maxim 1-Wire DS18B20 series). In Digital Input/Output modes, each channel can support a TTL compatible or ST (Schmitt Trigger) input (depending on the channel) or a 5V output signal. In Analog Input mode, each channel can convert a voltage of between 0 to 5V (or higher voltage using a voltage-divider) into a 10-bit digital representation. Finally, in Temperature Sensor mode, each channel can be connected to a Maxim/Dallas DS18B20 series 1-Wire Digital Temperature Sensor (sold separately)! From CanaKit.

UK1104

4-Channel USB Relay Board With 6-Channel A/D Interface, Factory Assembled & Tested

Wired & Tested

$59.95

USB PIC Programmer

Factory Assembled, Wired & Tested, PicKit2 Compatible!

Powered via USB - no additional supply required! 100% Compatible with MPLAB IDE (appears as a PicKit2)! Programs a wide range of PICS from 8 to 40 pins! ZIF sockets for easy programming & removal! USB cable included!

This is a fully factory assembled and tested professional quality USB PIC Programmer, offering ZIF (Zero Insertion Force) sockets for quick and easy PIC programming! The USB port connection means no mucking around with old serial ports or clunky serial-to-USB adapters. Just connect directly to your computer and you are ready to go! The USB connection also eliminates the need for a separate power supply, as power is taken directly from your computer's USB port. This programmer is also 100% compatible with the PicKit2 interface, but unlike the PicKit2, it incorporates ZIF sockets for easy insertion and removal of the PIC! I'd say that gives it the edge! It's fully Compatible with Microchip's MPLAB IDE - in fact when you plug it in, you can control it exactly as you would the original PicKit2, allowing you to program most popular PIC Microcontrollers. Standalone windows programming software fully supported by Microchip is also included, and the unit comes fitted with a sturdy metallic base and a standard ICD RJ11 connector. In addition, it has onboard status LEDs to indicate programming and power LEDs, and the firmware is fully updatable as new devices are released. Updates to the firmware can be easily downloaded via Microchip's official website. From CanaKit.

UK1300

USB PIC Programmer, Factory Assembled & Tested

$69.95

48

Data Programming

KIT

Wired & Tested

Mini-USB PIC Programmer

Versatile Programming Power in a Small Package!

Powered via USB - no additional supply required! 100% Compatible with MPLAB IDE Programs a wide range of PICs from 8 to 20-pins Includes ICSP connector for programming PICS up to 40-pins

A professional yet compact USB PIC Programmer offering a 20-pin ZIF (Zero Insertion Force) socket for easy programming of most Microchip PIC Flash devices that do not require Low-Voltage Programming. This PIC Programmer uses a convenient USB port for connection to the computer as opposed to the traditional Serial port. This eliminates the need for a separate power supply, as power is taken directly from your computer's USB port. The PIC Programmer also offers In-circuit programming through a standard 6-pin ICSP connector as well as a the built-in 20-pin ZIF socket. This means easy programming of most PICs of up to 20-pins right on the programmer! This Programmer is also 100% compatible with PICkit 2 interface, and because it incorporates a ZIF socket it can be used as both a production programmer and experimental programmer. It is also fully compatible with Microchip's MPLAB IDE software, allowing it to program most popular PIC Microcontrollers. The firmware is fully upgradeable, and as new devices are released firmware updates are available via Microchip's official website. Dimensions: 3.76" x 1.79" From CanaKit. (USB Cable not included).

CK1301 UK1301

Mini-USB PIC Programmer Kit Mini-USB PIC Programmer, Factory Assembled & Tested

$34.95 $49.95

Extended USB Experimenter's Interface Board

33 total inputs and outputs! Digital, analog, & PWM Isolated computer connection! Communications routines! 0-10V or 0-5V selection per input/output Includes diagnostic and testing software Advanced features

8 analog 10 bit inputs: 8 analog 8 bit outputs: 8 digital inputs: 8 digital outputs: 1 PWM output: General response time: USB port: USB cable: USB power: External power: Software: PC Requirements: Dimensions: SPECIFICATIONS 0-5 or 0-5V at 20kOhm 0-5 or 0-10V at 47 ohm Open collector, gnd=0, LED indication Open collector, 50V/100mA, LED indication 0-100% open collector, 40V/100mA, LED 4ms per command USB1.1 and USB2.0 compatible Included A-B 60mA, up to 8 cards to one PC 12VDC at 300mA (not included) Diagnostic Windows software with DLL Pentium class or higher, USB1.1 or 2.0, Win98SE, WinME, Win2K, XP, Vista 2.7" x 5.6" x 0.8"

KIT

Wired & Tested

Go To The Next Level Of USB Experimenting!

This interface board is the big brother of the K8055 above, and is packed with even more features, making it the ultimate PC interface tool for hobbyists. The ability to control almost any device imaginable and get real-time feedback from your PC means virtually unlimited possibilities! The high throughput possible with this board will be a big help to anyone working with bandwidth limitations of serial and parallel port interfaces, and since the USB is handled in hardware, communication between your computer and the device generates very little CPU overhead! Like the K8055, all communication routines are contained in a Dynamic Link Library (DLL) that is provided along with Windows based diagnostic software. You can also write custom Windows applications in Delphi Visual Basic, C++, or any other 32-bit Windows development tool that supports calls to a DLL. This advanced interface has a total of 33 inputs and outputs that include both digital and analog inputs and outputs as well as one PWM output.

Connection between the interface board and your computer is galvanically-optically isolated so damage to the computer is impossible. This provides an even greater level of secure implementation. Get ready to take your USB development to the next level. From Velleman.

K8061 VM140

Extended USB Experimenter's Interface Board Kit Extended USB Experimenter's Interface Board, Factory Assembled & Tested

$149.95 $169.95

KIT

Programmable Message Board

Includes backlit LCD display! Serial interface! 8 inputs! Non-volatile EEPROM memory! No programming skills needed!

Add A High Tech Display To Your Own Project!

If you have never experimented or used an LCD message display, DISPLAY MODES this kit is for you! You can use this as a stand-alone display that is 1. Display the status of all inputs simultaneously remotely programmed or as an integral display for one of your own 2. Display all active inputs 3. Display active input with highest priority projects!

4. Display text messages in a "tickertape" display

With a very nice supertwist backlit 16 character LCD display, you can provide alphanumeric displays in four display modes. There are 8 separate inputs and each input accepts dry contacts, open collectors or logic levels. The nonvolatile EEPROM memory can store up to 9 sixteen character messages! A default message can be displayed to signal that no inputs are active. RS232 interface is based on 2400/N/8/1 with no handshaking to make for a simple interface. Message transfer software is available online to transfer messages from your PC to the message board. Messages can be recalled by a simple pushbutton. This is the perfect kit to get your hands dirty with alphanumeric displays and their control circuits. It's fun, you learn, and you have a really great display when it's built! Board measures 4.9" x 2.9" x 1.2". If you're looking for a really nice finished display, order the custom case/bezel kit. From Velleman.

K8045 B8045

Programmable LCD Message Board Kit Custom Enclosure With Matching Bezel

$54.95 $23.95

Information

Ramsey Electronics 2012 Catalog

3 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

711294


You might also be interested in

BETA
Microsoft Word - Vol 3 Jul 2010 EDITEDjhlbdvjs YES.doc
1002-3469A.doc
Introduction To PIC Programming Tutorial Using A PIC16F84A (3081)
8052.com SBC Manual