Read OPSS1801%20Nov04.pdf text version

ONTARIO PROVINCIAL STANDARD SPECIFICATION

METRIC OPSS 1801 NOVEMBER 2004

MATERIAL SPECIFICATION FOR CORRUGATED STEEL PIPE PRODUCTS

TABLE OF CONTENTS 1801.01 1801.02 1801.03 1801.04 1801.05 1801.06 1801.07 1801.08 1801.09 APPENDICES 1801-A Commentary SCOPE REFERENCES DEFINITIONS SUBMISSION AND DESIGN REQUIREMENTS - Not Used MATERIALS EQUIPMENT - Not Used PRODUCTION QUALITY ASSURANCE OWNER PURCHASE OF MATERIAL

1801.01

SCOPE

This specification covers the requirements for all corrugated steel pipe products to be used for storm sewers, pipe culverts, subdrains, catch basins, maintenance holes, and eccentric loaders. 1801.01.01 Significance and Use of Appendices

Appendices are not a mandatory part of this specification unless invoked by the Owner. Appendix 1801-A is a commentary appendix to provide designers with information on the use of the specification in a Contract.

Page 1

Rev. Date: 11/2004 OPSS 1801

1801.02

REFERENCES

This specification refers to the following standards, specifications, or publications: Canadian Standards Association G401-01 Corrugated Steel Pipe Products

1801.03

DEFINITIONS

For the purpose of this specification, the following definitions apply: Corrugated Steel Pipe Products means any one or any combination of the following products: round corrugated steel pipe with an end finish corrugated steel pipe arch with an end finish round structural plate corrugated steel pipe with an end finish structural plate corrugated steel pipe arch with an end finish round spiral rib pipe with an end finish spiral rib steel pipe arch with an end finish perforated corrugated steel pipe corrugated steel pipe coupler bands with or without gasket corrugated steel pipe end sections corrugated steel pipe safety slope end treatments corrugated steel pipe saddle branches corrugated steel pipe maintenance holes corrugated steel pipe catch basins

1801.05 1801.05.01

MATERIALS Corrugated Steel Pipe Products

Corrugated steel pipe products shall be according to CSA G401 and Appendix A of the same standard. Coating shall be galvanized, aluminized type 2, or polymer as specified in the Contract Documents.

1801.07 1801.07.01

PRODUCTION Fabrication

Fabrication of the corrugated steel pipe products shall be according to CSA G401. Metal thickness and corrugation profile for corrugated steel pipe products shall be as specified in the Contract Documents.

1801.08 1801.08.01

QUALITY ASSURANCE Certificate

Suppliers shall provide a certificate upon request to indicate that the product was produced and tested according to this specification.

Page 2

Rev. Date: 11/2004 OPSS 1801

1801.08.02

Inspection, Testing, and Record Keeping

Inspection, testing, and record keeping for corrugated steel pipe products shall be according to CSA G401. 1801.08.03 Markings

Corrugated steel round pipe and pipe arch and spiral rib round pipe and pipe arch shall be marked according to CSA G401 along with the name of the pipe manufacturer in each end of the pipe or at 3.0 m intervals along the inside of the pipe. Structural plate corrugated steel pipe plate shall be marked according to CSA G401.

1801.09

OWNER PURCHASE OF MATERIAL

Corrugated steel pipe with corrugated steel coupler bands shall be measured in metres along the length of the pipe. For measurement purposes, a count will be made of all other corrugated steel pipe products. Payment at the price specified in the purchasing order shall be for supply and delivery of the corrugated steel pipe with coupler bands and other corrugated steel pipe products to the destination and at the time specified. The cost of all testing, except that performed in the Owner's laboratory, shall be included in the price.

Page 3

Rev. Date: 11/2004 OPSS 1801

Appendix 1801-A, Commentary for OPSS 1801, November 2004 Note: This appendix does not form part of the standard specification. It is intended to provide information to the designer on the use of this specification in a Contract.

Designer Action/Considerations Designer should specify the following in the Contract Documents: Coating type. (1801.05.01) Metal thickness. (1801.07.01) Corrugation profile. (1801.07.01)

The designer should ensure that the Ontario Provincial Standards General Conditions of Contract and the 100 Series General Specifications are included in the Contract Documents.

Related Ontario Provincial Standard Drawings OPSD 709.010 OPSD 709.020 OPSD 709.030 OPSD 709.040 OPSD 800.010 OPSD 800.011 OPSD 801.010 OPSD 801.02 OPSD 801.030 OPSD 801.040 OPSD 801.041 OPSD 801.042 OPSD 801.043 OPSD 805.010 OPSD 805.020 OPSD 805.030 OPSD 805.040 OPSD 922.401 Corrugated Steel Pipe 1200 mm Dia. Maintenance Hole with Benching or Sump, Depth - 4.0 m Maximum Corrugated Steel Pipe 1200 mm Dia. Maintenance Hole for Sewers Larger Than Riser, Depth - 4.0 m Maximum Corrugated Steel Pipe 700 or 1000 mm Dia. Catch Basin with Benching or Sump, Depth - 4.0 m Maximum Corrugated Steel Pipe 700 or 1000 mm Dia. Catch Basin for Sewers Larger Than Riser, Depth - 4.0 m Maximum Concrete Pipe Culvert and Sewer Extensions Using Corrugated Steel Pipe Concrete Rigid Frame Box and Open Culvert Extensions Using Corrugated Steel Pipe Cut End Finish, Circular Pipe and Pipe-Arch Corrugated Steel Pipe End Section Details, Corrugated Steel Pipe Bevel Details, Circular and Pipe-Arch Structural Plate Corrugated Steel Pipe Culvert and Sewer Safety Slope End Treatment, Notes and Tables Culvert and Sewer Safety Slope End Treatment, Assembly Details Culvert and Sewer Safety Slope End Treatment, Connection Details Culvert and Sewer Safety Slope End Treatment, Installation Details Height of Fill, Round Corrugated Steel Pipe and Structural Plate Corrugated Steel Pipe Height of Fill, Corrugated Steel Pipe Arch and Structural Plate Corrugated Pipe Arch Height of Fill, Round Spiral Rib Pipe Height of Fill, Spiral Rib Pipe Arch Energy Attenuator, End Treatment, Eccentric Loader, Component - Loader Assembly

Page 4

Rev. Date: 11/2004 OPSS 1801

Information

4 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

701578


You might also be interested in

BETA
UFGS 23 81 47 Water-Loop and Ground-Loop Heat Pump Systems
Standard Specification for Airport Construction
WIS 4-25-01
Microsoft Word - tofc_large P.doc
GUIDE SPECIFICATIONS