Read PROGRAMMING CABLES AND SOFTWARE FOR MITSUBISHI PLC.PDF text version

PROGRAMMING CABLES AND SOFTWARE FOR MITSUBISHI PLC'S To program Mitsubishi PLC's by the CPU programming port, the following hardware and software is recommended.

*FX1s *FX1n *FX2n FX3u PLC Programming Port (mini din 8-pin round RS422) SC00 (RS232 to RS422 Converter Cable) *1 To PC RS232 (Serial Port D9 Connector) PC can run GX Developer V8 or IEC GX Developer V7 *1 You can also use the SC02 Converter cable (D25 RS422 to D9 RS232) and NIP02 Adaptor Cable (mini din 8 to D25) instead of SC00

Q00JCPU, Q00CPU, Q##HCPU Serial Port Programming Port (mini din 6-pin round RS232) QC30R2 Programming Cable

To PC RS232 Serial Port D9 Connector PC must run GX Developer Professional V8 or IEC GX Developer V7

FX, A Series Programming Port (D25 Connector RS422) SC02 (RS232 to RS422 Converter Cable)

To PC RS232 Serial Port D9 Connector PC can run GX Developer V8, IEC GX Developer or MEDOC for DOS

PROGRAMMING CABLES AND SOFTWARE FOR MITSUBISHI PLC 7/09/2006 Disclaimer ­ No responsibility or liability accepted for errors, omissions or subsequent damage. ©Wayne Frost ­ Rawsons Electrical Pty Ltd

If your PC does NOT have a Serial Port then you can use a USB to Serial Converter

Any PLC as per above

SC00, SC02 or QC30R2 as per above.

205146 USB to RS232 converter

To PC USB Port Configure as Com 1, 2, 3 or 4 for MEDOC for DOS or up to COM 63 for GX Developer V 8.2# or higher

Q02HCPU...Q25HCPU USB Port USB Programming Port

QC20USB Cable

To PC USB Port PC can run GX Developer Professional V8 or IEC GX Developer

Pre 1980 PLC's F, F1, F2 or K Series PLC PLC Programming Port for Keypad programmer

F2-20GF1 for F,F1,F2 KHGGP for K Series Old type SC02 RS232 to RS422 Converter Cable (new type will NOT work) To PC RS232 Serial Com 1 or Com 2 port

PC must run Medoc for DOS any Version for F, F1, F2. V3.12 or earlier (1990 or earlier) for K series

PROGRAMMING CABLES AND SOFTWARE FOR MITSUBISHI PLC 7/09/2006 Disclaimer ­ No responsibility or liability accepted for errors, omissions or subsequent damage. ©Wayne Frost ­ Rawsons Electrical Pty Ltd

Information

PROGRAMMING CABLES AND SOFTWARE FOR MITSUBISHI PLC.PDF

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

274966


You might also be interested in

BETA
Workabout Pro & S spcsht A4
C:\DOCUME~1\gwaidley\MYDOCU~1\W
PROGRAMMING CABLES AND SOFTWARE FOR MITSUBISHI PLC.PDF