Read section11.pmd text version

S11/1

S11/1

TRANSMISSION

TORQUE CONVERTERS .......................................................... S11/1 FLEX PLATES-AUTO, BOLTS.................................................. S11/2 TRANSMISSION-AUTO ............................................................ S11/3 VALVE BODIES/PARTS.............................................................. S11/3 REBUILD KITS/FILTER SERVICE KITS............................... S11/4 MODULATORS ........................................................................... S11/5 SUMP PANS/DIPSTICKS & TUBES/COOLING .................... S11/5 SHIFTERS-AUTO........................................................................ S11/6 REPLACEMENT CABLES/SUNDRIES ................................... S11/7 TRANSMISSION-MANUAL/SHIFTERS-MANUAL .............. S11/8 DRIVE FLANGES/MOUNTS/SPEEDO DRIVE PARTS ........ S11/9 PROPSHAFT AREA .................................................................... S11/9 Torque Converters

Art Carr Supertorque

Built and Tested in the USA.

Art Carr Torque Converters are one of the best on the market today. The Ford Motor Company chose them for their Advance Vehicle Division, and Competition Off-Road vehicles. The Supertorque 11" is 200-500rpm higher stall than the standard item. The 10" is 500-1000 rpm higher. Increases of up to 34 bhp at the rear wheels at 4000 rpm, have been obtained over the standard converter. Good for up to 450 bhp. Uses Torrington roller bearings, burnished hubs, and are fitted with a drain plug.

General Motors

TCI Sizzler Converter

Intended for the Street Rodder with stock or mildly modified engines. 300400rpm increase in stall speed.

BY14130

TH200/700R4 27spline 11" NONLOCKUP

£302.76

BY241538

TH350 GM

£219.26

Torque Converters-up to 350bhp Torque Converters

BY20404 BY50441 BY20402 BY20412B BY20413 Torkmaster 2400 TH350/400 Torkmaster 2400 C4 70-82 26spln Torkmaster 3000 TH350/400 Holeshot 2400 TH350/400 Holeshot 3000 TH350/400 £176.92 £259.93 £211.84 £277.80 £369.22 BY20480 BY20481 Nitrous Holeshot 2400 TH350/400 Nitrous Holeshot 3000 TH350/400 £292.34 £422.52

Torkmaster 2400 is ok for mild performance [cam/manifold & headers]. Stall speed should be between 2300-2500rpm. Torkmaster 3000 should have a stall speed of 2800-3200rpm. Torknaster's should not be used for towing, no N2O , no Transbrake, and not Big Block. Holeshot 2400 is ok for mild to medium serious performance applications, Pro Street. Stall speed should be between 23002500rpm. Holeshot 3000 is ok for serious performance Pro Street. Stall speed should be between 28003200rpm. Holeshot converters are ok with Nitrous , Blowers, and Big Block. Not for Transbrake.

Holeshots are furnace brazed & have better bearings. Nitrous Holeshots should be used in all 450ft lb of torque applications [blown & or Nitrous]

Real Steel Tel: 01895 440505

e-mail: [email protected]

Iss39

S11/2

- TRANSMISSION Torque Converters Flex Plates & Bolts

S11/2

Flex Plates-Auto

Chevrolet V8 Small Block-not LS1 BYV516 Std- 153 teeth - Pre 1986 £41.28 BY10-012 SFI certified, HD- 153 teeth - Pre 1986 £77.10 BYV503 Std- 168 teeth - Pre 1986 £29.15 BY10-010 SFI certified, HD- 168 teeth - Pre 1986 £80.23 BY14088765 Std- 153 teeth - 1986 on £36.55 BY10-024 SFI certified, HD- 153 teeth - 1986 on £79.44 BYV508 Std- 168 teeth - 1986 on £42.66 BY10-025 SFI certified, HD- 168 teeth- 1986 on £84.43 BYV504 383/400 external balance 168 teeth £32.72 BY10-015 SFI 383/400 ext balance 168 teeth £79.44 Chevrolet V8 Big Block 396-454 MARK 4/5/6 BY10-010 SFI certified, HD- 168 teeth 396-427 1965-90 no weight BY10-020 SFI certified, HD- 168 teeth 454 1970-90 with weight BY10-026 SFI certified, HD- 168 teeth 454 MK5/6 1991-97 with weight & cast crank £80.23 BYV631 BYV608 BY12-045 BY12-040 FORD V8 Small Block-not 281 4.6 289-351W/C [all 351W/C are 28"oz] Std-141 teeth 28"oz 1974-78 Must 2 Std-157 teeth-10.5" bolt circle, pre 1982 SFI 157teeth 28"oz, 1964-76 SFI 157teeth 50"oz, 1981-96 £95.11 £42.65 £79.44 £80.24 £31.90 £80.24 £41.06

BYFRA-205 Std-164 teeth 28"oz 1968-80 BY12-030 SFI 164 teeth 28"oz 1968-80 BYV609 Std-164 teeth 50"oz,1982 on 302 FORD V8 Big Block inc FE

£76.73

BYFRA-212 Std FE 390 check bk £61.61 BY12-060 SFI 164t no weight 1968-78 429/460 £123.08 BY12-055 SFI 164teeth 28"oz, 1970-97 429/460 £121.87 Pontiac V8 326-455

£82.73 BYV542 Std 166 teeth 1967-76 2.75" centre BYFRA-117 Std 166 teeth 1976-78 2.5" centre BY13-065 SFI certified, HD- 166 teeth 67-76 £61.34 £41.70 £79.44

Bolts (Flex Plate)

FLEX PLATE TO CRANKSHAFT-ARP

BY100-2901 Chevy 2pce /Ford 7/16" x .680" 12pt head£10.39 BY200-2906 Chevy 1 pce seal 7/16 x .725" small head £14.75 BY244-2901 Chevy GenIII 6 bolt type £22.43 Torque Converter Bolts- to Flex Plate ARP Torque Converter Bolt Kit. For GM Turbo 400, 7/16-20 x .725. Comes with hardened washers. 170,000 psi. BYRTC-2 1 kit per car £10.99

BYRTC-1 BY6717

ARP P/glide & TH350 with nuts & washers £15.88 Mr G Ford 3/8" x 24 flanged l/nuts only £7.68

Real Steel Tel: 01895 440505

e-mail: [email protected]

S11/3 Transmission - Auto

- TRANSMISSION Transmissions Valve Bodies & Parts

S11/3

TCI Street/Strip Transmissions

Built and Tested in the USA.

TCI Streetfighter Street/Strip transmissions are built to be tough enough to withstand the rigors of the toughest Street Machine. Ideal for engines up to 450bhp, non Supercharged. Fitted with a Manual/Auto valve body. Shift purely as a manual, or leave in "D" for a fast changing auto. Blue printed and dyno tested. Super Streetfighter is good for 600bhp normally aspirated. This trans has better clutches, bands & lubrication system.

Streetfighter Chevy TH350 non lockup

TCI Streetfighter- up to 450bhp

Streetfighter Chevy TH400 non lockup

TCI Streetfighter- up to 450bhp

BY311000 Chevrolet- 6" Tailshaft

£1226.66

BY211000 Chevrolet- 4" Tailshaft

£1050.94

Super S/fighter Chevy TH400 non lo/up

TCI Streetfighter- up to 600bhp

BY211005 Chevrolet- 4" Tailshaft

£1584.94

Art Carr Competition Valve Bodies

(manual)

For race competition where instant shifts and manual control of your automatic transmission are a must. The "manual" competition, low drag valve body is the same as that used on all Art Carr competition transmissions. It enables manual shift control in upshifting with virtually zero lag between gears. It has a positive neutral position and eliminates the need for vacuum throttle control.

Art Carr Transmission Brakes/Valve Bodies

The new Art Carr P.G. Rebel BrakeTM has a quicker release, and has a built in safety feature. With neutral in the reverse detent for when the transmission is shifted into reverse it is neutral. To back up, shift into reverse and use the trans brake button. Mirco-switch transmission brakes give instant super launch. All tansmission brakes come with bolt-on valve body and solenoid. (Without brake button)

Valve Body Improvement Kit

The Valve Body Improvement Kit is the cheapest and simplest transmission performance kit to install. The transmission pan is removed and the valve body is taken out. The stock separator plate is replaced with a special B&M plate, reinstall the valve body, filter and pan and your done. In few cases other minor modifications may also be made.

GM BY30262 BY20260 BY70239 B&M TH350 1968-81 B&M TH400 1965-87 B&M TH700R4 82-93 £30.08 £29.96 £39.42 BY50262 BY40263

Ford B&M C4 1970-84 B&M AOD 80-92 4 speed £29.94 £32.26

Mopar BY10225 BY10232 B&M TF727 1971-77 B&M TF727 1978-79 Non lock up £34.46 £31.93

Real Steel Tel: 01895 440505

e-mail: [email protected]

S11/4

- TRANSMISSION Valve Body Parts Manual kits/Rebuild Kits

S11/4

Hi-Tech Valve Body Kit

The Art Carr Hi-Tech Valve Body Kit will improve the life of your transmission and will provide firmer, more responsive shifts and increase manual control over shift points. Intended for vehicles that place heavier demands on the transmission such as high performance cars, campers and motorhomes. The next step beyond the Shift improver kit. The Hi-Tech Valve Body kit provides additional driver manual control. Most conventional automatic transmissions won't downshift into lower gear above 15mph, and automatically upshifts at a predetermined speed no matter what gear you are in. With this kit you can downshift at any speed (except C4, AOD, TH2004R, TH700R4 & 4L60E). This is an asset when in HD usage.

GM BY30228 BY14000 BY70235 TH350 1968-79 [B&M] TH400 1965-88 [B&M] TH700R4 1982-91 [B&M] Mopar £63.20 £62.89 £73.94

Ford

BY50229 BY40228

C4 1970-82 [B&M] C6 1967-88 [B&M]

£37.60 £56.35

BY10227 BY10228

TF727 1978-79 [B&M] TF727 1962-77 [B&M]

To Order £67.13 Manual shift. (No drive position)

Hi-Tech Valve Body Kit

A full manual valve body kit, designed to change your automatic valve body into a full manual valve body; (stock forward shift pattern). Therefore, eliminating the use of vacuum or throttle linkage. Valve body kit comes with simple installation instructions.

GM

Ford/Mopar

BY20219

TH400

£71.96

BY10219

Mopar 727

£85.60

Special Parts for TH-700R4

Kit to resist kickdown from 4th to 3rd

BY70237 "Prevents " forced part throttle k/down £28.01

Rebuild Kits

STD/Heavy Duty Rebuild Kits/Bands/Gasket Kits/Seals

These kits are designed to give you all the parts needed for the average overhaul, so you do-it-yourself. Kit contents vary, ask salesperson for further details. Powerglide kits come complete with low band. If you need the band, double check before buying the kit, as some kits do not come with the band.

BY752004 BY752002

GM- Standard TH250-350C excl 250C master kit TH400 master kit

Ford £84.84 £83.00 £73.31

Real Steel Tel: 01895 440505 BYKT-1083 C4 1970-77 Standard type £40.31

Above kit contains-paper gaskets, sump gasket, rubber "o" rings, rubber lip seals, metal clad seals, sealing rings, friction clutches & steel plates.

BYKT-1104 TH700R4 1985-87

e-mail: [email protected]

S11/5

SUPER KIT

This kit contains-all paper gaskets, sump gasket, rubber "o" rings, rubber lip seals, metal clad seals, sealing rings, friction clutches, steel plates, filter, band, modulator, thrust washers & common bushes.

- TRANSMISSION Repair Kits/Filter Kits Modulators/Sump Pans GM - HD

S11/5

BY753026 BY753024

TH350 1969-79 TH400 1965-84

Mopar

£109.67 £105.52

BY21040 BY21042 BY21041

B&M P/glide Aluminium-inc band B&M TH350 1968-79 B&M TH400 1965-88

£171.07 £158.69 £177.37

Oil Seals TH350/400/C4/C6/FMX £265.20 £29.78 £52.49 BY41SM02 Front Seal-TH350-400 BY41SM10 Rear Seal-TH350-C4-FMX-AOD BY26SM01 Front Seal-C4-C6-FMX BY34SM01 Rear Seal- TH400 £4.54 £4.54 £7.56 £4.06

BY128900 TCI Race TF727 1971-77 inc band BY33335 Art Carr TF727 intermediate band BY2124579Art Carr 4.2 Lever on big band

Filter Service Kit

The Filter Service Kit comes with a pan gasket and filter to fit your transmission for you to change fluid on a regular maintenance program. Servicing your transmission regularly will extend the transmission life.

GM BYAG172 BYAG171 BYAG168 BYAG215B BYAG235B Powerglide with alum case Pro-gauge TH350 1968-79 Pro-gauge TH400 1965-88 Pro-gauge TH200R4 Std Pro-gaugeTH700R4 Std Mopar/Chrysler £12.82 £6.85 £8.65 £9.50 £14.03

Ford BY77010 Art Carr C4 1967-69 BYAG185 Pro-gauge C4 1970-84 BYAG180 Pro-gauge C6 1967-88 std type £9.56 £9.23 £7.80

BYAG1734 TF727 1967-79

£6.85

Modulators

TCI/B&M Modulators

An adjustable modulator from enables you to set your shift points within a 2 to 4 mph range. This unit replaces stock modulators. A must for fine tuning your transmission. Adjustable modulators are found on most performance aftermarket specially built transmissions. They are pre-set for normal shift patterns.

GM BY260101 BY360001 BY360002 BY360003

FORD C4 Push in 1974-86 green stripe C4/C6 Screw in 1966-72 white stripe C6 Push in -late 72 on purple stripe C6 Push in 1977 and on green stripe £21.37 £23.86 £22.88 £19.90

BY20234

TH350/400

£22.88

Sump Pans

Mopar Aluminium

Cast Aluminium and Chrome

GM Aluminium BY10350 BY10150 TH350 Deep Pan TH400 Deep Pan Sump Pan Drain Plug Kit. Easy to fit. £24.44 £26.36 £36.56 £131.60 £118.87

BY10100

TF727 Deep Pan TH350/400/700 Chrome

£134.71

BY9122 BY9121 BY70289

TH350 finned Transdapt TH400 finned Transdapt TH700R4 deep B & M 82-91 [check book]

BY80250

£7.18

Real Steel Tel: 01895 440505

e-mail: [email protected]

S11/6 Dipsticks and Tubes

BY9690 Powerglide - Daytona Chrome BY9764 TH350 - Daytona Chrome BY8138 TH350 - TD flexible type BY9765 TH400 - Daytona Chrome BY8139 TH400 - TD flexible type BY743860 TH200R4 universal type BY8140 TH700R4 - TD flexible type BYM-6750-D303 C4 Ford Racing Chrome

- TRANSMISSION Dipsticks, Cooling Automatic Shifters

S11/6

GM & FORD

£15.67 £15.06 £41.82 £15.06 £42.13 £26.21 £42.24 £28.39

GM - Black

BY15687192 BY15969602

TH700R4 Dipstick Tube for dipstick TH700R4

£16.74 £25.62

Cooling

Remote Oil Filter

Many transmission failures are caused by contamination. A remote transmission oil filter increases filtration efficiency 2-5 fold. Includes permanent remote-adaptor, spin-on filter and hardware. Use BYPH8A filter.

B&M Automatic Transmission Cooler

A high efficiency rating allows this smaller cooler to equal or better the cooling of ordinary fin and tube coolers. Formed aluminium 'stack plate' is stronger, smaller, lighter and more efficient than standard coolers.

BY75202

£31.40

BY70264 BY70268

Super Cooler 11" x 6" x 1-1/2" Super Cooler 11" x 7-1/2" x 3/4"

£68.15 £58.09

Hi-Tek Cooler with Electric Fan

Suitable for Automatic transmission fluid, & engine oil. Includes a 12volt high flow fan. Thermal switch included, activates fan at 175f. Tested to 200psi. Fitted with 1/2" NPT fittings.

BY70297 9.5" Fan & cooler BY70298 7" Fan & cooler

£233.38 £207.56

Automatic Shifters

Universal Auto Shifters

QUICKSILVER

This is a true ratchet shifter that can be ratcheted up or down the quadrant between Neutral & Low yet the stick remains in the same centred position. When the stick is in Drive it can be pulled up & shifted directly to Reverse or Park. The reverse lockout feature meets NHRA and IHRA requirements. You cant miss a gear. Includes lighted gear position indicator, neutral safety switch, backup light switch and knob. Cable operated for quick installation and accurate shifting. Can be used with a reverse pattern valve body. Not available in RHD. Fits GM TH200/250/350/400. Ford C4/C6. Chrysler 1966 and later Torqueflite 727 & 904.

MEGASHIFTER

The Megashifter has that popular 4-speed look with a full ratchet action. The precision ratchet mechanism is considered the best in the business. For convenience, when in Drive, you can lift the trigger and shift directly to Park or Reverse. The reverse lockout feature meets NHRA and IHRA requirements. You cant miss a gear. Cable operated for quick installation and accurate shifting. Can be used with a reverse pattern valve body. Includes neutral safety switch, backup light switch, lighted gear indicator & T handle. Fits GM TH200/250/350/400/700-R4/200-R4. Ford C4/C6. Chrysler 1966 and on Torqueflite 727 & 904.

BY80676 BY80586

Left Hand Drive 2.5" shorter stick kit

£216.00 £ 35.98

BY80690 BY80685

LHD RHD

£238.98 £215.81

PRO RATCHET

This precision ratchet works with either standard or reverse pattern valve bodies. The single hand operated reverse lockout feature meets NHRA/IHRA requirements. Easy access, even with race gloves. Trigger forward and ratchet to reverse. Comes supplied with a lightweight brushed aluminium cover and 5' super duty cable. Includes neutral saafety switch, backup light switch, gear position indicator and both forward and reverse pattern indicator decals. Fits: GM TH400/350/250/200; Ford C4, C6 & AOD*; Chrysler '66 and later Torqueflite 727/904.

PRO STICK

Generally considered to be the finest Racing Automatic shifter available. Precise action guarantees you can't miss a shift or accidentally go into Reverse or Park. One basic shifter, which accepts various inexpensive gate plates to provide patterns for 3 speed forward, 3 speed reverse, 2 speed forward or reverse, & 4 speed forward. Comes with 3 speed forward pattern plate. The reverse lockout feature meets NHRA and IHRA requirements. Ideal for Powerglide, Air and CO2 shifter kits. Fits GM TH200/250/350/400/200R4*/700R4*. Ford C4/C6/AOD**. Chrysler 1966 and on Torqueflite A-727 & A-904. * ** Requires Gate Plate 80712. AOD Requires Fitting kit 40496.

BY80841

Left Hand Drive

£212.98 BY80706 LHD £186.53

* Requires Fitting kit 40496.

Handles-Knobs

Activates B&M launch control, transbrake, boost retard or a nitrous system. Fits all B&M shifters and most SAE thread shifters.

Gate Plates, Levers & Indicator

BY80713 BY80710 BY35498 Power glide 2 speed gate plate & lever £44.21 Reverse Pattern gate plate & lever (3) £20.42 B&M shifter bracket & lever kit- trans*£24.76 * for TH400 TH350 TH250 TH2004R & TH700R4

BY46112

Button Knob

£49.74 Real Steel Tel: 01895 440505

e-mail: [email protected]

S11/7

- TRANSMISSION Auto Shifters Replacement Cables

S11/7

Console Automatic Shifters

QUICKSILVER

This is a true ratchet shifter that can be ratcheted up or down the quadrant between Neutral & Low yet the stick remains in the same centred position. When the stick is in Drive it can be pulled up & shifted directly to Reverse or Park. Factory cable operated for quick installation and accurate shifting. Reverse lockout feature meets NHRA and IHRA requirements. Includes lighted gear position indicator, neutral safety switch, backup light switch and chrome knob. You cant miss a gear. Not available in RHD.

MEGASHIFTER

The Megashifter has a manual transmission look with auto trans consistency, comes with a short stick. Custom fit console application. Cable operated for quick installation and accurate shifting. The reverse lockout feature meets NHRA and IHRA requirements. The precision ratchet mechanism is considered the best in the business. For convenience, when in Drive, you can lift the trigger and shift directly to Park or Reverse. Includes neutral safety switch, backup light switch, lighted gear indicator & T handle. You cant miss a gear. For TH400/350/200 & 700-R4 in the following models:

BY80688 Camaro 73-81 Firebird TH400/350 70-81

£211.73

BY80694 BY80694 BY80692

Camaro 73-81 Firebird 70-81 Camaro 1982-92 & Firebird*

£241.87 £241.87 £215.81

* will not fit 1988 to '92 Firebird Formula

CABLES- Kickdown & Shifter replacement

Hurst

Hurst Shifter Cable 5ft. Threaded one end, ID .1875" eyelet the other.

BY500-8555

Hurst Cable

£39.84

B&M

B&M Shifter Cable - threaded one end, ID .267" eyelet the other. BY80831 BY80832 BY80833 B&M 3ft Cable B&M 4ft Cable B&M 5ft Cable £44.50 £47.14 £44.50 BY30287 BY70242 BY25521268 Real Steel Tel: 01895 440505

B&M / GM

Kickdown/T.V. cables TH350 B&M TH700R4/200R4 B&M TH 200R4 GM £33.00 £29.86 £23.50

e-mail: [email protected]

S11/8 Sundry Items

B&M

TH400 Kickdown switch. Mounts to either a TH350/700 throttle cable bracket BY20297 B&M TH400 Switch £43.98

- TRANSMISSION Sundries-Manual Transmission Manual Shifters

S11/8

B&M Transmission Safety Shield (RED)

Mr Gasket/GM

Flywheel/torque converter inspection Keeps stones and dirt out BY5115 Mr Gasket TH350/400, chrome BY14038632 GM TH200R4 BY15650700 GM TH700R4 cover £34.43 £27.62 £43.06

BY22150

Powerglide

£75.65

Manual Transmission

Tremec FORD USA T5 5 Speed

The T5 Transmission is a 5 speed helical gear Transmission with Syncromesh on all forward gears. This version is the World Class Heavy Duty Version. Will accept up to 330 ft lbs of torque. Ratios are 1st-2.95. 2nd-1.94. 3rd-1.34. 4th-1.00. 5th-.63. Input shaft is 1 1/16" x 10. Output shaft is 28 tooth. . BY1352-000-251 FORD USA V8 £1455.28

Tremec T56 6 Speed

The T56 Transmission is a 6 speed helical gear Trans with Syncromesh on all forward gears. Will accept up to 450 ft lbs of torque. Ratios are 1st-2.97. 2nd1.94. 3rd-1.35. 4th-1.00. 5th-.84. 6th -.62. Input shaft is 1 1/8" x 26 spline. Output shaft is 26 tooth. BY1386000012 FORD £2190.00

Tremec TR-3550/TKO & TKO600 Spares

NB. Part numbers TCET4617 & 4618 are TKO600 models BY2603865 Front oil seal-all £6.47 BY2603979 Std rear seal-TR-3550 £8.89 BY2606416 TKO rear seal-TR-3550 £6.98 BYTCSJ1277 Rear seal-TKO600 £10.75

Electrical Plug & Wire For Speedo Sender

Plugs into electrical sender unit for speedo, fitted on side of Tremec 600 gearbox. BYAJG330 BY957500 GM Tremec 600 only Ford Tremec 600 only £10.97 £20.41

Shifters-Manual

Hurst Indy 4 speed Shifter

The Hurst Indy Universal 4 speed Shifter is designed to be used on most popular 4 speed transmissions. Fits most popular passenger car floorpans. Narrow spring loaded gate for ease of operation. Heat treated & plated parts for added strength & durability. 7.5" tall chrome plated gear lever provides short precise throws. Complete with all fitting & installation guide. Not for use with factory consoles. Can use BY114-7494 shifter boot kit.

Hurst Pit Pack

These steel bushings are designed to take the punishment of racing applications. These pit packs can be used on the Master Shift 3-speed and Competition Plus 4-speed. Kit includes 7 steel bushings and clips. BY332-7302 3,4 or 5 speed manuals £10.66

Shifter Spares/ T5 & Tremec

BY10150052 Gear lever knob for Chevrolet T5 BYF4ZZ-7213-A Gear lever knob Ford T5/Tremec BYE7ZZ-7210-A Gear lever upper section Ford T5/Tremec BY55015K Bolt kit- gearlever to- "mount stub" £15.46 £19.37 £65.30 £1.15

BY503-0030 BY503-0031

Most GM Muncie/T10 Ford-10 bolt top cover [see bk]

£261.43 £264.55

Real Steel Tel: 01895 440505

e-mail: [email protected]

S11/9

Hurst Shifter Boot Kits

- TRANSMISSION Manual Shifters Rear Drive Flanges/Mounts/Speedo Drive Parts Propshaft Area

S11/9

Hurst Shifter Boot Kits complete the installation of your shifter. These boot kits come complete with chrome trim plate and mounting hardware. 7-3/4" x 8-3/4" overall dims'.

* See Shifters for applications

BY114-7494 Boot kit

Price:£34.66

Rear Drive Flanges/Mounts/Speedo Drive Parts

Rear Drive Flanges and Mating Plate

BYE6TZ-4841-E BY2-3-6041X BY3868649 BYFLPROP Ford T5 + std Tremec 28 spln fl£83.62 Tremec 600 31 spline £72.18 TH350/T5 GM 26 spln flange £89.88 P/shaft plate T5 (req welding) £35.44

Gearbox Mountings

BY270-2378 BY270-2388 BY2253 BY270-2268 BY270-2337 BY3-1108G BY4-1104G BY55010K BY55014K

T10/T5 GM £7.69 T5 Ford £11.42 Ford Mustang 64-74 £11.68 TH400 GM £12.00 TH350 GM £8.75 GM man./auto polyurethane mount £26.52 Ford T5/Tremec poly' HD mount £31.15 Bolt kit GM T5 mount £5.70 Bolt kit Tremec £4.87

T10/TH350/Richmond Speedo Drive

BY345215 BY10054241 BY3708148 BY3987918 Drive fitting Fitting seal Metal retainer Drive gear £17.71 £2.68 £4.32 £10.26 BY1362294 BY15562374 BY1359273

TH400 Speedo Drive

Drive fitting Fitting seal Drive gear Price:£47.76 Price:£3.02 Price:£15.90

Ford USA T5 & Tremec Speedo Drive

BY87036-S94 BYC1DZ-17292-A BYCODD-17271-B BY55016K BYAJG90 BYAJG95 Fitting seal-replacement Clip to secure gear Drive gear-yellow Bolt kit- cable to Tremec TKO600 blanking plug Adaptor-cable screws onto £3.50 £2.11 £8.98 £0.55 £19.18 £103.40

Chevrolet T5/T56 Speedo Drive

BY14090580 BY55011K

Fitting/with Gear Bolt kit for retainer

Price:£40.43 Price:£0.65

Propshaft Parts

GM U-Joint Girdle

U-Joint Girdles

These U-Joint Girdles provide more bearing surface for the Universal Joint Bearing cap which increases its load bearing capacity. Manufactured from 7075-T6 aluminium with a Anodized finish.

Ford U-Joint Girdle

BY85800 BY85810

55-82 - U Bolts type 65-82 - 12 bolt straps

Price:£28.62 Price:£27.78

BY85860

Ford 9"

Price:£28.62

Dana U-Joint Girdle

BY85800

Dana 60 U-Bolt type

Price:£28.62 Real Steel Tel: 01895 440505

e-mail: [email protected]

Information

section11.pmd

9 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

42710


You might also be interested in

BETA