Read refer.pdf text version

REFERENCES

[ACI 116, 1985] [Ahmed, 1989] ACI Committee 116, "Cement and Concrete Terminology," Publication SP-19 (85), Detroit, Michigan, 1985. Ahmed, A.E., and El-Kourd, A.A., "Properties of Concrete Incorporating Natural and Crushed Stone Very Fine Sand," ACI Materials Journal, Vol. 86, No. 4, July-August, 1989 [ASTM C 29-97] "Standard Test Method for Unit Weight and Voids in Aggregate," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 33-97] [ASTM C 39-96] "Standard Specification for Concrete Aggregates," American Society for Testing and Materials, Annual Book, 1998. "Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 78-94] "Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 109-95] "Standard Test Method for Compressive Strength of Hydraulic Cement Mortars," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 117-95] "Standard Test Method for Materials Finer than 75µm (No. 200) Sieve in Mineral Aggregates by Washing," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 128-97] "Standard Test Method for Specific Gravity and Absorption of Fine Aggregate," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 136-96a] "Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates," American Society for Testing and Materials, Annual Book, 1998.

427

428

[ASTM C 138-92] "Standard Test Method for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 143-97] "Standard Test Method for Slump of Hydraulic Cement Concrete," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 150-94] [ASTM C 157-93] "Standard Specification for Portland Cement," American Society for Testing and Materials, Annual Book, 1998. "Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 230-97] "Standard Specification for Flow Figure for Use in Tests of Hydraulic Cement," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 672-92] "Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 837-92] "Standard Test Method for Methylene Blue Index of Clay," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 944-95] "Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 39-96] "Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 1202-97] "Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration," American Society for Testing and Materials, Annual Book, 1998.

429

[ASTM C 1064-93] "Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete," American Society for Testing and Materials, Annual Book, 1998. [ASTM C 1252-93] "Standard Test Method for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)," American Society for Testing and Materials, Annual Book, 1998. [ASTM D 422-90] "Standard Test Method for Particle Size Analysis of Soils by Hydrometer," American Society for Testing and Materials, Annual Book, 1998. [Baker, 1973] Baker, S. D., and C. F. Scholer, "Effect of Variations in Coarse-Aggregate Gradation on Properties of Portland Cement Concrete," Highway Research Record, No.441, Grading of Concrete Aggregates, Highway Research Board, Washington, D. C., 1973. [Bonavetti, 1994] Bonavetti, V.L., and Irassar, E.F., "The Effect of Stone Dust Content in Sand," Cement and Concrete Research, Vol. 24, No. 3, pp. 580-590, 1994. [Brown, 1995] [Carlson, 1938] [Celik, 1996] Brown, R.H., "Mineral Fines (-200), Today's Opportunity, Tomorrows Success," 5th ICAR Symposium, 1995 Carlson, R. W., "Drying Shrinkage of Concrete as Affected by Many Factors," Journal of ASTM, Proceedings, Vol.38, 1938. Celik, T., and Marar, K., "Effects of Crushed Stone Dust on Some Properties of Concrete," Cement and Concrete Research, Vol. 26, No.7, pp. 1121-1130, 1996 [CEN, 1994] European Committee for Standardization, "Proposed Draft for Aggregates for Concrete Including those for Use in Roads and Pavements," CEN/TC154/SC2, London, January, 1994. [Clelland, 1980] Clelland, J., "Sand for Concrete, a new test method," New Zealand Standards Bulletin, 1980

430

[Cross, 1994] Cross, S.A., Smith, B.J., and Clowers, K.A., "Evaluation of Fine Aggregate Angularity Using National Aggregate Association Flow Test," Transportation Research Record 1437, pp. 43-50, 1994. [Dolar-Mantuani, 1983] [Dukatz, 1985] Dolar-Mantuani, Ludmila, "Handbook of Concrete Aggregates," Noyes Publications, New Jersey, 1983. Dukatz, E.L. and Marek, C.R., "Evaluation of Manufactured Stone Sand for Use in Virginia," Construction Materials Research and Development, Project 11-3.68, Vulcan Materials Company, March, 1985, 39 pp. [Fowler, 1997] Fowler, D.W. and Constantino, C., "International Research on Fines in Concrete," International Center for Aggregates Research, 5TH Annual Symposium, C2-4-1, 1997 [Fowler, 1993] [Fowler, 1995] [Fowler, 1997] Fowler, J.C., "Marketing Stone Sand," Stone Review, pp. 1820, August, 1993. Fowler, J., "Construction Uses of Stone Fines," ICAR Symposium C-1, 1995. Fowler, J.C., "Increasing Amount of Minus 200 Fines in Portland Cement Concrete: 200 mesh fines in concrete," International Center for Aggregates Research, 5th Annual Symposium, 1997. [Gaynor, 1968] [Gaynor, 1983] [Georgia Specification] [Glanville, 1938] Gaynor, R.D., "Joint Research December, 1968 Gaynor, R.D., and Meininger, R.C., "Evaluating Concrete Sands," Concrete International, December 1983, pp. 53-60. Georgia manufactured aggregate specification. Glanville, W.H., Collins, A.R., and Matthews, D.D. "The Grading of Aggregates and Workability of Concrete," London, H.M.S.O., June 1938. pp. 42. Road Research Technical Paper No. 5. Laboratory Activities,"

431

[Goldbeck, 1936] [Gray, 1964] [Hansen, 1965] Goldbeck, A.T. "Stone Sand For Concrete," National Crushed Stone Association, Bulletin No. 10, 40pp., August, 1936 Gray, J. E. and J. E. Bell, "Stone Sand," National Crushed Stone Association, Engineering Bulletin No.13, 1964. Hansen, T. C. and K. E. C. Nielsen, "Influence of Aggregate Properties on Concrete Shrinkage," ACI Journal, Proceedings, Vol. 62, July, 1965. [Harr, 1977] [Heaps, 1988] [Hewlett, 1998] [Hudson, 1997] [Hudson, 1997] [Hughes, 1941] Harr, M. E., "Mechanics of Particulate Media," McGraw-Hill, Inc., New York, 1977. Heaps, R.K., "Stone Sand for Concrete," Presented at the CON/AGG Show, Houston, 1988. Hewlett, P. C., "Lea's Chemistry of Cement and Concrete," 4th edition, John Wiley and Sons, Inc., New York, 1998. Hudson, B.P., "Manufactured Sand ­ Destroying Some Myths," Quarry, pp. 57-62, October, 1997. Hudson, B.P., "Manufactured Sand for Concrete," 5th ICAR Symposium, E2-2-1, Austin, Texas, 1997. Hughes, C. A., and K. A. Andersen, "The Effect of Fine Aggregate on the durability of mortar," Proceedings, ASTM, Vol.41, 1941. [Jackson, 1995] [Ingamells, 1986] [Kalcheff, 1977] Jackson, N.M. and Brown, R., "Use of Higher Fines Contents in Portland Cement Concrete," 4th ICAR Symposium, 1996 Ingamells, C. O., "Applied Geochemical Analysis," New York, 1986 Kalcheff, I., "Portland Cement Concrete with Stone Sand," Special [Keen, 1979] Engineering Report, National Crushed Stone Association, Washington D.C., pp20., July, 1977 Keen, R. A., "Impurities in Aggregates for Concrete," Cement and Concrete Association, Advisory Note no.18, Slough, UK, 1979.

432

[Kosmatka, 1988] Kosmatka, S. H. and W. C. Panarese, "Design and Control of Concrete Mixtures," 13th edition, Portland Cement Association, Engineering Bulletin, Illinois, 1988. [Kronlof, 1994] [Krumbein, 1963] Kronlof, A, "Effect of Very Fine Aggregate on Concrete Strength," Materials and Structures, Vol. 27, pp. 15-25, 1994. Krumbein, W. C. and L. L. Sloss, "Stratigraphy and Sedimentation," 2nd edition, W. H. Freeman and Co., San Francisco, CA, 1963. [Malhotra, 1985] Malhotra, V.M., and Carette, G.G., "Performance of Concrete Incorporating Limestone Dust as Partial Replacement for Sand," ACI Journal, Proceedings V. 82, No. 3, pp. 363-371, May-June, 1985 [Maldonado, 1996] Maldonado, A., S. Orsetti, and C. Tourenq, "Standardization and Qualification of Fines in Aggregates in France," International Center for Aggregates Research, 4th annual symposium, 1994. [Manning, 1995] [Manning, 1995] [Marek, 1995] Manning, A., "Particle Shape ­ Manufactured Sand," 3rd ICAR Symposium, C1-3, 1995 Manning, A., "Particle Shape of Manufactured Sand: The Use of Varied Crushers," Stone Review, pp. 17-18, April, 1995. Marek, C. R., "Importance of Fine Aggregate Shape and Grading on Properties of Concrete," International Center for Aggregates Research, 3rd annual symposium, 1995. [Mather, 1966] [Mckeagney, 1984] Mather, B., "Shape, Surface Texture and Coatings (Concrete Aggregates)," ASTM STP 169-A, 1966. Mckeagney, R.B., "Trend To Use More Stone Sand," Conference on Crushed Stone for Road and Street Construction and Reconstruction, National Crushed Stone Association, June 14-15, 1984.

433

[Mindess, 1981] [Murdock, 1960] [Murdock, 1979] Sidney Mindess and J. Francis Young, "Concrete," PrenticeHall, Inc., New Jersey, 1981. Murdock, L.J., "The Workability of Concrete," Magazine of Concrete Research, V. 12, n.36, pp. 135-144, 1960. Murdock, L. J. and K. M. Brook, "Concrete Materials and Practice," 5th edition, John Wiley and Sons, Inc., New York, 1979. [NC Specification] [NCHRP, 1998] North Carolina manufactured aggregate specification. National Cooperative Highway Research Program, "New Test Method of Methylene Blue," NCHRP Project 4-19, Report 405, Aggregate Tests Related to Asphalt Concrete Performance in Pavements, 1998. [NCSA, 1976] [Neville, 1996] [Nichols, 1982] National Crushed Stone Association, "Stone Sand for Portland Cement," Concrete Materials, pp. 12, February, 1976. Neville, A. M., "Properties of Concrete," 4th edition, John Wiley & Sons Inc., New York, 1996. Nichols, F. P., Jr., "Manufactured Sand and Crushed Stone in Portland Cement Concrete," Concrete International, August 1982. [NRMCA, 1998] [PCA, 1975] [Phelps, 1988] [Pike, 1989] National Ready Mixed Concrete Association, "United States Geological Survey," Annual Report, 1998 "Special Concretes, Mortars, and Products," Portland Cement Association, John Wiley and Sons, Inc., New York, 1975. Phelps, R.E. " Concrete Sand and How It Affects the Economy, Strength and Workability of Concrete," October, 1988 Pike, D. C., "Report to CAB/2 on a project to examine the regulation of fines in sands for concrete and mortar," British Standards Institution, London, 1989. [Pike, 1990] Pike, D. C., "Standards for Aggregates," Ellis Horwood Limited, England, 1990.

434

[Pike, 1992] Pike, D. C., "Methodologies for assessing the variability of fines in sands used for concrete and mortars," PhD thesis, Postgraduate research institute for Sedimentology, University of Reading, UK, 1992. [Pinter, 1987] Pinter, R.M., Vinson, T.S., Johnson, E.G., "Nature of Fines Produced in Aggregate Processing," Journal of Cold Regions Engineering, Vol. 1, No. 1, pp. 10-21, March, 1987. [Popovics, 1992] Popovics, Sandor, "Concrete Materials: properties, specifications and testing," 2ed Edition, Noyes Publications, Park Ridge, New Jersey, 1992. [Powers, 1953] Powers, M. C., "A New Roundness Scale for Sedimentary Particles," Journal of Sedimentary Petrology, Vol.23, No.2, 1953. [Ramirez, 1990] Ramirez, J. L., J. M. Barcena, and J. I. Urreta, "Proposal for Limitation and Control of Fines in Calcareous Sands Based upon Their Influence in Some Concrete Properties," Materials and Structures, Vol.23, 1990. [Saunders, 1995] [Singh, 1957] Saunders, C.H, Jr., "Manufactured Stone Sand Usage in North Carolina," ICAR Symposium, C1-2, 1995 Singh, B.G., "Effect of the Specific Surface of Aggregates on Consistency of Concrete," ACI Journal, Vol. 28, No. 10, Proceedings V. 53, pp. 989-997, 1957. [Soroka, 1976] Soroka, I. and N. Setter, "Calcareous Fillers and the Compressive Strength of Portland Cement," Cement and Concrete Research, Vol.6, 1976. [Soroka, 1977] Soroka, I. and N. Setter, "The Effect of Fillers on Strength of Cement Mortars," Cement and Concrete Research, Vol.7, 1977. [Tepordei, 1996] Tepordei, V.V., "Crushed Stone," Minerals Information, U.S. Geological Survey, 1996.

435

[Uchikawa, 1996] Uchikawa, H., Hanehara, S. and Hirao, H., "Influence of Microstructure on the Physical Properties of Concrete Prepared by Substituting Mineral Powder for Part of Fine Aggregate," Cement and Concrete Research, Vol. 26. No. 1, pp. 101-111, 1996. [US DOTI, 1981] "Concrete Manual,"

th

A

Water

Resources

Technical

Publication, 8 revised edition, Water and Power Resources Service, U.S. Department of the Interior, 1981. [Verbeck, 1960] Verbeck, G. L., and Landgren, R., "Influence of Physical Characteristics of Aggregates on Frost Resistance of Concrete," Proceedings of the ASTM, 1960. [Waddell, 1993] [Wills, 1967] Waddell, Joseph J. and Joseph A. Dobrowolski, "Concrete Construction Handbook," 3rd edition, McGraw-Hill, Inc., 1993. Wills, M. H. Jr., "How Aggregate Particle Shape Influences Concrete Mixing Water Requirement and Strength," Journal of Materials, vol 2, n 4, pp 101-111, 1967. [Wood, 1995] Wood, S.A. and Marek, C.R., "Recovery and Utilization of Quarry By-Products for Use in Highway Construction," 3rd Annual Center for Aggregate (CAR) Symposium, University of Texas, Austin, Texas, March 1-4, 1995.

Information

9 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

500378


You might also be interested in

BETA
AIT Annual Report Research 2006
3_Bao cao YT MT _OK_IN.doc
MF408 Farm Record Keeping