Read 8341-70 text version

These fuel senders are designed for top mounting in unpressurized aluminum, stainless steel, or plastic fuel tanks in all types of marine vessels. They include special features and protection from corrosion problems (internal and external to the fuel tanks) which make them the quality standard for the industry.

Application

ISO 9001:2008 CERTIFIED

Marine Fuel Level Sender

8341-7000 Series

Marine Fuel Level Sender

General Information & Features

The fuel sender is equipped with a thick film resistance card with a range of 240 to 30. The recommended gasket for use under the head is made of nitrile rubber and must be ordered separately under part number 0015-00716.

The float arm on this sender is 24" [609mm] long measured from the pivot point allowing it to be cut to an appropriate length to gauge any tank depth from 6" [152mm] to 25" [635mm]. The float and the washers are furnished unassembled to the float arm. The cutting and crimping process is to be done prior to the float assembly. See DS-1235.

Standard configuration, with the lead hole at 12:00, has the float arm swinging at 3:00.

8341-R7000

8341-F7000

Part #

Market

After Market OEM

Float Type

Round Flat Flat

6" - 19 1/2" 6" - 19 1/2" 6" - 25"

Tank Depth

See DS-1325

8341-A7000

-F7000 -A7000

OR

-R7000

See reverse side for dimensional data, materials of construction, performance, and advice on how to order.

01/29/10

The Measure of Excellence

[METRIC]

8341-7000

Marine Fuel Level Sender

ø2.75 REF [69,3] .62 [15,7] .25" Spade Terminal [6,35]

Lead Hole

2.34 [59,4] Five .205 [5,2] DIA Holes on 2-1/8" [54] DIA B.C. (For #10 Screws)

20°

1.37ø [34,8]

Shown with cylindrical float

72.5° Float Arc

As Required #6 Ground screw & L. Washer

Mounting Recommended for top mounting only Accuracy Resistance accuracy at empty +0%, -3%; at full +3%, -0% of full scale. System accuracy depends upon proper fitting of sender to tank, tank shape and indicator calibration. Temperature -40°F to 158°F, -40 to 70C. Vibration Qualified at 2g, 40 HZ. Power 0.5 Watts maximum. Leak Test Passes 16 PSIG [1,1 Bar] test.

Note: For installation instructions see DS-953 (data sheet).

General Specifications*

Materials of Construction*

Head Tempered aluminum w/gold irridite finish, made to SAE pattern for fuel senders (2 1/8" bolt circle for 5 #10 screws) Support Tempered aluminum w/gold irridite finish Card Holder & Head Insulator Injection-molded thermoset plastic Ground Strap & Signal Strap Tin-plated brass or copper Center Stud, Nuts & Washers Brass Resistance Element Thick Film Contact Spring Plated beryllium copper Contact Silver Float Nitrile rubber (cylindrical or rectangular/flat) Stainless steel float wire Ground Screw and Lockwasher Stainless steel

* Materials and specifications are subject to change without notice. Pressure ratings subject to change due to temperature and other environmental considerations.

11616 Harry Hines Blvd. · P.O. Box 29242 · Dallas, TX 75229 · (972) 241-2161 · FAX (972) 620-1403 Website http://www.rochestergauges.com · E-mail [email protected]

The Measure of Excellence

01/29/10

Information

8341-70

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

137553