Read section_19.pdf text version

BODIES

Full Steel 1932 Ford Roadster Bodies

Deuce America all steel deuce roadster bodies are designed and built for the serious street rodder. Combining strength and quality unmatched by any other street rod body on the market. Reinforced with an internally braced support cage and heavy sheet metal through-out, the Deuce America all-steel deuce bodies are ready to go, with out all the additional work required to brace and strengthen other bodies (saving you time and money). Note: Bodies only No guards or Grille Shell Part# DAC-DD1001SM Deuce America 32 steel roadster with base options, Smooth style firewall with flat recess to suit chev/ford etc. Smooth cowl, hidden hinges. Removable front floor board and dash. Strong support cage, gas suspended & weather sealed boot. Heavy gauge steel, door handles, strikers & hidden boot release Cable. Die stamped steel construction. Part# DAC-DD1002TR Deuce America 32 steel roadster with original options: Ribbed original firewall with flat recess to suit chev/ford etc. Cowl vent & cowl bead, exposed original style hinges. Removable front floor board and dash. Strong support cage, gas suspended & weather sealed boot. Top Tabs for roof. Heavy gauge steel, door handles, strikers & hidden boot release Cable. Die stamped steel construction.

Body Statistics..

1) Body is a reproduction of a 1932 Deuce Roadster with modern advancements. 2) Body is all steel, Die Stamped. Same thickness or thicker than original. 3) All exterior dimensions are same as original. 4) Braced internally much stronger than original. 5) Approx. 200-250 man hours per body (from parts, to assembly, to shipping). 6) Assembled on 1932 frame rails for a good fit.. 7) Body ships as bare metal.

Improvements..

BODIES, PANELS & EXTERIOR ACCESSORIES 403

1) Front cowl area is heavily tube braced for added strength and support. 2) Front cowl bead shaved for "smooth" look. 3) Front cowl vent filled for "smooth" look. 4) Rear seat and trunk area heavily braced with a Support Cage of 1-1/4" steel tubing. 5) Firewall included, (recessed for Small Block engine).Welded in for more strength. 6) Removable, all steel Floorboard (fits 350 TurboTransmission), (included). 7) Fully adjustable "hidden" door hinges standard. (Original"Exposed" style, optional). 8) Modern `OEM" Chrysler door latches for smooth, quiet,easy operation. 9) Modern style inner door handles, standard. (Original`Chrome Lever" style, optional). 9) Inner trunk redesigned and seals with a modern rubber weatherstrip. (Included). 10) Trunk lid is Gas-strut suspended and glides open when released. (Included). 11) Hidden, adjustable, cable release for trunk lid.(Included). 12) Rear wood "tack" strip area filled for "smooth" look. 13) All exterior handles shaved for "smooth" look. 14) Traditional, flat style dash. (Included).

Options- call for pricing.. 1) Cowl bead installed. 2) Cowl vent installed. 3) Many varieties of firewalls installed. 4) Many varieties of windshields installed. 5) Floor modifications if desired. 6) Top mounting brackets installed. 7) Original style "exposed" door hinges installed. 8) Original style "chrome lever" inner door handles installed. 9) Hoods and installation. 10) Tops and installation. 11) Rumble seat installed. 12) Body fitted to Chassis. 13) Louvering 14) Steering Columns installed. 15) Windshield bead removed for "Duvall" style windshield.

All Steel 1932 Roadster Body

The Brookville all steel Deuce is the most accurate reproduction body you can buy. As with all Brookville bodies, we use the same gauge steel as the originals and every part of the body is interchangeable with the originals. · Smooth Cowl Top · Smooth Trunk or Rumble Lid · Smooth Doors with Stock Hinges · Steel Front Floor · Flat Hotrod Style Floor in Seat Area · Stock or Flat Firewall Sold Separately · Comes in Hardwood Shipping Crate 1932 Stock Roadster Body BRAB-100

All Steel Model A Roadster Body

The Brookville all steel Model A is the most accurate reproduction body you can buy. As with all Brookville bodies, we use the same gauge steel as the originals and every part of the body is interchangeable with the originals. · Smooth Cowl Cover · Smooth Flat Floors · 4" Recessed Firewall · 32 Style Dash Installed · Steel Front Floor for 4" Recessed Firewall · Smooth Trunk · Smooth Deck Former · Comes in Hardwood Shipping Crate Description Part No. 1928-29 Stock Roadster Body for Model A Frame BRAF-100A 1930-31 Stock Roadster Body for Model A Frame BRAF-100B

All Steel 1932 3 Window Coupe Body

Using the most sophisticated engineering and digital measuring methods we have been able to create a truly accurate yet more precise reproduction of this classic body. Our three window features the same gauge metals, the stamping details, internal bracing and wood components found in the originals. Our car does benefit from modern welding and finishing techniques and from our exclusive one piece whole body side stamping but every panel from this new body is still interchangeable with the factory originals. · Smooth Cowl Top · Smooth Trunk Lid · Smooth Doors with Stock Hinges · Smooth Face Dash Installed · Steel Front Floor · Flat Hotrod Style Floor in Seat Area · Stock or Flat Firewall Sold Separately · Comes in Hardwood Shipping Crate Description Part No. 1932 Stock 3 Window Coupe Body BRAB-200

PANELS & BRACES

Radiator Splash Apron - 1932

Die Stamped smooth rolls (VI18-17766/67-S for hardware kit) VIB-16527 1932 passenger & pickup VIB-16527-CHP 1932 chopped 2"

Radiator Splash Aprons

Die Stamped. Black powder coated aprons UPA6054 1932 Car & Pickup UPA6063 1932 2" chopped UPA6062 1928-29 Die Stamped UPA6053 1930-31 Die Stamped

1935-36 Smooth Steel Running Boards

Rear Frame Horn Covers - Steel

Includes rubber channel and plugs. VIB-16399 1932 die stamped steel

Sleek, all steel boards that are ready for prep and paint. Leave un-covered for today's "smooth" street rod look. Sold by the pair. OVERSIZE - Extra Shipping will Apply. BD48-16450/1-BR

1933-34

Large Front Fender Braces - 1933-34

Front Fender to Fender Brace Bolt Set

Note: 1928-32 takes 1 set for one car. 1933-34 takes 2 sets for one car. Set includes: 2 smooth head special carriage bolts, 2 washers and2 nuts of like material. VIB-16026-BK 1928-34 Black VIB-16026-SS 1928-34 Polished Stainless

1939 Deluxe-1940 Cars Running Board Set

Steel with vulanised rubber with all the detail of the originals. BD91A-16450/1-BD

Running Board Braces

Die Stamped and painted black. Sold in sets of 4 VIB-16485-S 1932 passenger & pickup VI40-16485-S 1933-34

1928-29 Fenders

Description Part No. 1928-29 Roadster & Coupe Steel Front Fenders BRA188ASL/A188R 1928-29 Roadster & Coupe Steel Rear Fenders BRA183AL/A183AR 1928-29 Roadster & Coupe Front Fender Braces BRA-188-ABR Description Part No. 1928-29 Running Boards w/Mat & Stainless Trim BRA-185-ASS 1928-29 Smooth Running Boards BRA-185-ASM 1928-29 Running Board Braces (Set of 4) BRA-182-BR

Steel Fenders

1932 Ford

Part # GASB-16005 GASB-16006 GASB-16160/1 GASB-16312-A/B

Made in U.S.A. Description Reqd. 1932 Front Fender. Stamped steel. Right side. Passenger & Commercial. 1932 Front Fender. Stamped steel. Left side. Passenger & Commercial. 1932 Rear Fenders. Stamped steel. Right & L left side. Coupe & Roadster. 1932 Rear Fenders. Stamped steel. Right and left side. Sedan & Phaeton. U.S.A.

1928-29 Running Boards

1932 Fenders

1932 Running Board Set

Steel with vulanised rubber with all the detail of the originals. VIB-16450/1-V 1932 Complete running boards.

Description 1932 Steel Front Left Fender 1932 Steel Front Right Fender 1932 Roadster & Coupe Steel Rear Left Fender 1932 Roadster & Coupe Steel Rear Right Fender 1932 Sedan Steel Rear Left Fender 1932 Sedan Steel Rear Right Fender 1932 Front Fender Braces

Part No. BRB-188-L BRB-188-R BRB-183-L BRB-183-R BRB-483-L BRB-483-R BRB-188-BR Part No. BRB-185-SM BRB-185

Fender Braces

1933-34 Running Board Set

Steel with vulanised rubber with all the detail of the originals. BD40-16450/1

1932 Running Boards

Heavy gauge stamped steel painted gloss black. Features correct curvature, perfect in every detail just like the original. Fits front fender towards the rear just in front of the running board.

Description 1932 Smooth Running Boards 1932 Stock Running Boards (Uncovered)

Front Fender Braces

VI40-16094-A BD40-16094-A BD50-16094 BD68-16094 BD78-16094 BD48-16341 BD78-16341 BD50-16341 BD81C-16341 VI40-16067-B

1933-1934 Passenger 1933-1934 Passenger 1935-1937 Pickup 1935-1936 Passenger 1937-1938 & 1939 Standard Pasenger 1935-1936 Passenger 1937-1941 Passenger 1935-1936 Pickup, 1935-1937 Panel 1938-1938 & 1941 Pickup 1933-34

Steel with vulanised rubber with all the detail of the originals. BD48-16450/1-BD

1935-36 Running Board Set

Rear Fender Braces

Support for large fender brace

1935-36 Running Board Mouldings

DAL48-16462-S Running board mouldings, (polished stainless steel), 1935-36 Passenger, sold as pair.

1932 Steel Firewalls

404

Steel firewalls for our 1932 Roadster and 3 Window Coupe bodies. Also fits original bodies. Description Part No. Flat with Stock Bead & Steel Feet BRB-1015 Stock with Stock Bead & Steel Feet BRB-1015STOCK

Fender Welt - Vinyl

Top quality black crushed grain vinyl. 1-1/2" wide with a 3/16" beab. VIB-16070-A 25ft 3/16" bead Vinyl VIB-16070-B 300ft 3/16" bead Vinyl

BODIES, PANELS & EXTERIOR ACCESSORIES

Excellent die stamped steel front fender braces are made to vintiques exacting standards. Sold in pairs. painted black. VI40-16047-8 1933-34

1934 Front Fender. Stamped steel. Right side. Passenger Car. GAS40-16006-B 1934 Front Fender, Stamped steel. Left side. Passenger Car. GAS40-16160-C 1934 Rear Fender. Stamped steel. Right side. Coupe & Roadster. GAS40-16161-B 1934 Rear Fender. Stamped steel. Left side Coupe & Roadster. GAS40-16312-A 1934 Rear Fender. Right (Pass.) Side. Stamped steel w/ correct beaded lip. Sedan & Phaeton. GAS40-16312-B 1934 Rear Fender. Left (driver's) side. Stamped steel w/ correct beaded lip. Sedan & Phaeton. GAS40-16396 1934 Gas Tank Cover. Die stamped, stock holes for rear bumper brackets and gas filler neck. Passenger Car only. GAS40-16396-SR 1934 Street Rod Style Gas Tank Cover. Center US license recess with or without stock holes as above. You specify. Passenger car only. GAS40-16005-B

1932 Ford Closed Car Dash Panels

HOT ROD BONNETS

1932 3 Piece Bonnets

Fits 1932 Closed Cars, 5 Window Coupe, Tudor, Fordor & Sedan Delivery

3 styles of `32 dash panels are made using high precision tooling to give your restoration or rod that fresh factory look with a beautiful fit. Each is made of 100% heavy guage steel finished in our black EDP coating, comes ready to paint & install.

Early `32 Style Dash Panel

With recessed top belt rail. Includes gauge cluster opening. BDB-300

RL560 RL551 RL560A RL556 RL556A RL558 RL558A

1932 Plain Top - Plain Sides 1932 Plain Top ONLY 1932 Pair Plain Sides - ONLY 1932 Plain Top - 3 Row Sides 1932 Pair 3 Row Sides - ONLY 1932 Plain Top - 4 Row Sides 1932 Pair 4 Row Sides Only

Late `32 Style Dash Panel

With raised top belt rail. Includes gauge cluster opening BDB-301

1928-29 & 1930-31 Model A Bonnets

RL550 RL550A RL551A RL554 RL554A RL562 RL562A RL564 RL566 RL568 RL570 RL569 RL569A RL552 RL552A RL553 RL553A

BODIES, PANELS & EXTERIOR ACCESSORIES

Highest quality 1928-29 & 1930-31 bonnets. The stock bonnet is exactly as the original using the same gauge steel, correct sizes and louver placement. Bonnets are complete with handles, centre hinge and moulding. Various Styles of Hot Rod bonnets are available with 32 centre hinge which gives a flat attractive appearance. For a full listing and availablitiy on Model A bonnets please call Rocket Hot Rods on 02 8825 1944

Custom `32 Style Dash Panel

1928-29 3 Piece Bonnets

RL428 RL428B

With raised top belt rail. No gauge cluster opening BDB-302

1928-29 Plain Top ­ Plain Sides 1928-29 w/ 1932 Grille Shell Plain Top ­ Plain Sides

1932 FORD Bonnets

1932 Plain Top 20 Louver Sides 1932 Pair 20 louver Sides - ONLY 1932 Cowl Induction Top ONLY 1932 Plain Top - 25 Louver Sides 1932 Pair 25 Louver Sides - ONLY 1932 4 Row Top - Plain Sides 1932 4 Row Top Only 1932 4 Row Top - 3 Row Sides 1932 4 Row Top - 4 Row Sides 1932 4 Row Top - 20 Louver Sides 1932 4 Row Top - 25 Louver Sides 1932 6 Row Top - Plain Sides 1932 6 Row Top Only 1932 Plain Top 1 Scoop Sides 1932 1 Scoop Sides Only 1932 Plain Top 2 Scoop Sides 1932 Pair 2 Scoop Sides Only

The stock bonnets are exactly as the original using the same gauge metal. Both 20 & 25 louver bonnets are available. All bonnets are pre-fit to a cowl and radiator shell to assure the corect contour. Hot Rod styles with various louver patterns are available in the the same high quality. Pressed steel handles and clips with rubber bumpers attached. Polished stainless steel centre hinge moulding included

1932 4 Piece Bonnets 1932 Roadster Dash

1932 Roadster Dash without Oval Recess BRB-139

1933 Bonnets

Quality 1933 bonnets using the same gauge steel as originals. The bead work on top panel is not available at this time. Side panels with bead work are available. All bonnets are pre-fit to a cowl and radiator shell to assure the corect contour. Hinge rods & centre moldings included. No latching hardware or handles available. 1934 handles can be installed apon request., RL500 RL501 RL502 RL504 RL505 1932 Plain Tops - 20 Louver sides 1932 Pair Plain Tops ONLY 1932 Pair 20 Louver sides - ONLY 1932 Plain Tops - 25 Louver sides 1932 Pair 25 Louver sides - ONLY

1933 4 Piece Bonnets

Steel Speed Blister

Drawn from 16-gauge steel, this blister is an awesome piece that can be used for everything from hood side blisters to making minature belly tanks. The blisters are 18 inches long by 6 inches wide at the fatest part of the belly and they're 3-1/4 inches deep at the waist. Also, because of the way they are carefully drawn, they can be easily cut out with a flange and bolted or rivited into a hood side or top for a very cool look.Sold Individually SO169-10002 Steel Blister

RL608B RL608C RL530 RL527 RL506 RL507 RL508 RL509 1932 Plain Tops - Plain Sides 1932 Pair Plain Sides ONLY 1932 Plain Tops - 3 Row Sides 1932 Pair 3 Row sides - ONLY 1932 Plain Tops - 4 Row Sides 1932 Pair 4 Row Sides - ONLY RL604 RL604A RL604B

1933 Plain Tops - Stock Sides 1933 Pair Stock sides ONLY

Stainless Steel Blister

5-1/4 x 2-1/4 inches. Stamped from 18-gauge stainless steel, these lil' blisters are 5-1/4 inches long, 2-1/4 inches wide at the belly and 3/4-inches deep. SO168-88001 Stainless Steel Blister

1933 Plain Tops - Plain Sides 1933 Pair Plain Tops ONLY 1933 Pair Plain Sides ONLY

1934 Handles are optional extra

405

CHEVY 1934-1935 3 Piece Bonnets

RL9550 RL9560

1934-35 Chev Plain Top ­ Plain Sides 1934-35 Chev Plain Top ­ 3 Row Sides

RL510 RL511 RL512 RL526 RL514 RL515 RL516 RL528 RL522 RL524 RL518 RL520 RL532 RL534 RL536 RL537 RL538 RL539

1932 2 Row Tops - 3 Row Sides 1932 2 Row Tops - ONLY 1932 2 Row Tops - 4 Row Sides 1932 2 Row Tops - Plain Sides 1932 3 Row Tops - 3 Row Sides 1932 Pair 3 Row Tops ONLY 1932 3 Row Tops - 4 Row Sides 1932 3 Row Tops - Plain Sides 1932 3 Row Tops - 20 louver Sides 1932 3 Row Tops - 25 louver Sides 1932 2 Row Tops - 20 louver Sides 1932 2 Row Tops - 25 louver Sides 1932 Plain Tops - 4 Door Sides 1932 4 Door Sides Only 1932 Plain Tops - 1 Scoop Sides 1932 1 Scoop Sides Only 1932 Plain Tops - 2 Scoop Sides 1932 2 Scoop Sides Only

RL605 RL605B RL605A

1933 Plain Tops - 3 Row Sides 1933 3 Row Tops ONLY 1933 Pair 3 Row Sides ONLY

RL608 RL608A

1933 Plain Tops - 34 Louver Sides 1933 Pair 34 louver Sides ONLY

1934 Bonnets

Superior quality 1934 bonnets. The stock bonnet is exactly as the original using the same gauge steel. All bonnets are pre-fit to a cowl and raditor shell to assure the corect contour. Bonnets are complete with handles, spring assemblies and stainless steel centre hinge moulding. 34 louvers are on a slant following the hood contours.

1934 4 Piece Bonnets

RL606 RL606A 1933 Plain Tops - 1 Scoop Sides 1933 1 Scoop Sides ONLY

RL709 RL709A RL703 RL703A

1935 3 Row Tops - 3 Row Sides 1935 Pair 3 Row Tops ONLY 1935 Plain Tops - 3 Row Sides 1935 Pair 3 Row Sides ONLY

RL620 RL621 RL622 RL623 RL607 RL607A 1933 Plain Tops - 2 Scoop Sides 1933 2 Scoop Sides ONLY

1934 Plain Tops - Stock sides - With cutout 1934 Plain Tops ONLY with cutout 1934 Stock sides ONLY 1934 Plain Tops - Stock sides - NO cutout

1933 3 Piece Bonnets

RL701 RL701A

1935 Plain Tops - 1 Scoop Sides 1935 Pair 1 Scoop Sides ONLY

1935 3 Piece Bonnets

RL630 RL631 RL631A RL630A RL612 RL612B RL613 RL613B RL609B 1933 Plain Top - Plain Sides - NO Cutout 1933 Plain Top ONLY No cutout 1933 Plain Top - Plain Sides With Cutout 1933 Plain Top ONLY With Cutout 1933 Pair Plain Sides ONLY 1934 Plain Tops - Plain sides - With cutout 1934 Plain Sides ONLY 1934 Plain Tops/'33 Louver sides - With cutout 1934 Plain Tops - Plain sides - NO cutout

RL710 RL710A RL710B

1935 Plain Top - Plain Sides 1935 Plain Top ONLY 1935 Pair Plain Sides ONLY

RL624 RL625 RL632 RL633 RL636 RL616 RL616B RL616A RL614 RL614B RL615 RL615B RL618 RL619 1933 Plain Top - 3 Row Sides - NO Cutout 1933 Plain Top - 3 Row Sides With Cutout 1933 Pair 3 Row Sides Only 1933 Plain 6 Row Top-3 Row Sides-NO Cutout 1933 6 Row Top ONLY NO Cutout 1933 6 Row Top- 3 Row Sides With Cutout 1933 6 Row Top ONLY - With Cutout 1933 6 Row Top - Plain Sides - NO Cutout 1933 6 Row Top - Plain Sides - With Cutout

1934 Plain Tops - 3 Row sides - With cutout 1934 Pair 3 Row Sides ONLY 1934 3 Row Tops - 3 Row sides - With cutout 1934 Pair 3 Row Tops - ONLY - With cutout 1934 3 Row Tops - Plain Sides - With cutouts

RL712 RL712A RL713 RL713A RL712 RL712A

1935 Plain Top - 3 Row Sides 1935 Pair 3 Row Sides ONLY 1935 6 Row Top - 3 Row Sides 1935 Pair 6 Row Top ONLY 1935 Plain Top - 1 Scoop Sides 1935 Pair 1 Scoop Sides ONLY

1936 Bonnet Sides

Top quality 1936 bonnet sides available plain or with hot rod louvered sides. No stock louvers available. Hardware included as shown. 1933

1934 3 Piece Bonnets

Plain Top and Plain Sides

RL617D RL617E RL617C RL617 RL617B RL617A 1933 Plain Top-'33 Louver Sides - With Cutout 1933 Plain Top-`33 Louvered Sides NO Cutout 1933 Pair `33 louver Sides Only 1933 Plain Top-'34 Louver Sides - With Cutout 1933 Plain Top-`34 Louvered Sides NO Cutout 1933 Pair `34 louver Sides Only RL644 RL639A RL645 RL639 RL644A RL643 RL642 RL642A 1934 Plain Top - Plain sides - NO cutout 1934 Plain Top - ONLY - NO cutout 1934 Plain Top - Plain sides - With cutout 1934 Plain Top -ONLY - With cutout 1934 Pair Plain Sides Only 1934 Plain Top - 3 Row sides - NO cutout 1934 Plain Top - 3 Row sides - With cutout 1934 Pair 3 Row Sides ONLY 1934 Plain Top - Stock sides - With cutout 1934 Plain Top - Stock sides - NO cutout 1934 Pair 34 louver sides ONLY 1934 Plain Top - 33 louver sides - With cutout 1934 Plain Top - 33 louver sides - NO cutout 1934 Pair 33 louver sides ONLY 1934 6 Row Top - 3 Row sides - NO cutout 1934 6 Row Top - ONLY - NO cutout 1934 6 Row Top - 3 Row sides - With cutout 1934 6 Row Top - ONLY - With cutout 1934 6 Row Top - Plain sides - NO cutout 1934 6 Row Top - Plain sides - With cutout RL742 RL742A RL742 RL742A 1936 4 Peice Pair - Plain Sides Only 1936 3 Peice Pair - Plain Sides Only 1936 4 Peice Pair - 1 Scoop Sides Only 1936 3 Peice Pair - 1 Scoop Sides Only RL740 RL740A 1936 4 Peice Pair - 3 Row Sides Only 1936 3 Peice Pair - 3 Row Sides Only

Plain Top and Louvered Sides

1934

Plain Top and Stock Sides

RL638 RL640 RL639B RL640A RL640D RL640B RL647 RL647B RL646 RL646B RL651 RL650

Louvered Top and Louvered Sides

1935 4 Piece Bonnets

Fine quality 1935 bonnets. No stock louvers available. Hardware included as shown.

More Rootlieb Bonnets and Bonnet Sides are available for:

406

RL610 RL610B RL610A RL611 RL611B RL611A

1933 Plain Top - 1 Scoop Sides No Cutout 1933 Plain Top - 1 Scoop Sides With Cutout 1933 Pair 1 Scoop Sides ONLY 1933 Plain Top - 2 Scoop Sides No Cutout 1933 Plain Top - 2 Scoop Sides With Cutout 1933 Pair 2 Scoop Sides ONLY

RL700 RL700A RL700B

1935 Plain Tops - 1 Plain Sides 1935 Pair Plain Tops ONLY 1933 Pair Plain Sides ONLY

T-Model Ford 1933 - 1934 Ford pickups 1935 - 1937 Ford Pickups 1931 - 1936 Chevrolet Cars 1932 - 1936 Dodge / Plymouth Cars For more information please call Rocket's Hot Rod deparment on: 02 8825 1944 or email: [email protected]

BODIES, PANELS & EXTERIOR ACCESSORIES

BONNET ACCESSORIES

DAN FINK Hidden Hinge & Latch Assemblies

UPA6248 These Kits are made from the Highest Quality Cold Rolled Steel with Stainless Aircraft Clevis Ends, Alignment Pins, Torsion Springs and with all Stainless Fasteners. Our Unique Hinge Design opens the Hood past vertical for fast engine access with the Hood Top being Quickly Removed by sliding out the Spring Ball Hinge Pins. All Kits come complete with a Locking Hood Prop Rod, Aluminum Control Knob, and all Hood Mounting Tabs and Weld Bungs. These Engineering Features make Our Kits the Number One Kit and Value available.

Hood Prop Kit

This hood drop kit eliminates resting your hood on the cowl and also is a kit to prevent from cracking expensive paint. All mounting hardware included. UPA6223 1928-Up Black UPA6248 1928-Up Stainless Steel

1928-29 Hood Shelves

1928-29 Hood Shelves

BRA188AHS

Adjustable-Level Self-Locking Hood and Trunk Prop

Please Specify Left or Right Side Opening PART NO. Model Size DF29SHL 23 to 31 Ford 37 to 39 Chevy 24" to 30" DF32SHL 32 Ford 31 to 36 Chevy 30" to 36" DF33SHL 33 to 36 Ford 32 & 33 Plymouth 36" to 42"

"Single" Opening Kits

Constructed of high quality billet aluminum and stainless steel. When the hood or trunk is raised, the Hood and Trunk Prop will automatically lock itself into position. This eliminates the need for two hands when opening your hood or trunk. A quick release allows the hood to be opened to its max for easy engine access. We offer two versions of the Hood and Trunk Prop, three and six level. This will allow the hood or trunk to be set at various levels without any unsightly objects holding it up. Each level of the six-level prop increases the opening of the hood or trunk by approximately 6 inches. Each level of the three-level prop increases the opening of the hood or trunk by approximately 12 inches. Part No. Description LK-0401014 Universal 3 level Hood and Trunk Prop Polished LK-0401024 Universal 6 level Hood and Trunk Prop Polished

Bonnet Handles

1934-36 Passenger, 1935-1937 Pickup

SET OF 4 - Gorgeous all polished stainless steel, designed to fit the hood for a sleeker, cleaner look. Includes cotter pin. VI48-16644/5-B

Stainless Steel Hood Handles

Cast stainless steel. Polished fit 1928 - 32 passenger car and 1928-34 pickup. Includes polished stainless screws. Sold in pairs VIB-16609-SS 1928-32 Passenger & 1928-34 pickup

Deck Lid Support Assembly

BODIES, PANELS & EXTERIOR ACCESSORIES

1932 Coupe & Roadster deck lid support assembly. Used to hold the deck lid up. DALA-41530 1928-31 Deck Lid Support Assembly

SO-CAL Cowl Spears

VIB-8220 VIB-8221 VI68-8226

SO-CAL Cowl Spears--long or short: Investment cast in stainless steel, these cowl spears add that finishing touch to any vehicle that has a stock center hood hinge, for example, `32 through `36 Fords. Because the spears are attached with automotive-grade double-sided tape, they can be adapted to many vehicles. They can also be cut to fit across a cowl vent if the short spear is not the desired look. SO001-62163 SoCal Spear SHORT SO001-62001 SoCal Spear LONG

Centre Hood Strips (Hood Hinge)

Hood Hinge Retainer Brackets DOUBLE/TRIPLE Opening Kits

These double/triple opening kits are made from heat treated aluminum with stainless control rods, dual prop rods, alignment pins and with all stainless fasteners. Although more time to install (than our single kits), these kits will open the hood three ways, both left and right as well as quick removal of the hood top. Our aluminum knob control rod system (a DFM safety design shared with our single hood kits) have state-of-the-art spring locking controls, which will insure your hood top will never unlatch unexpectedly. PART NO. Model Size DF29DHL 23 to 31 Ford 37 to 39 Chevy 24" to 30" DF32DHL 32 Ford 31 to 36 Chevy 30" to 36" DF33DHL 33 to 36 Ford 32 & 33 Plymouth 36" to 42"

Polished stainless steel with correct original inner shape for great fit. VI18-16632 1932 32" long VI40-16632 1933-36 33" long VIU-16632 Special 48" long

Chrome Hood Hinge retainer brackets include hardware. VIB-8220 1932-35 Front & 1933-36 Rear VIB-8221 1932 Rear VI68-8226 1936 Front VI46-8220-A 1935-37 Front & Rear

1936 Hood moulding set

DAL68-16722-S Hood moulding set, (stainless steel), 1936 Passenger, (6 pieces with moulding clips)

Bonnet Latches

1932 polished Stainless steel or Black VIB-16750-SS 1932 pass 7 1932-34 pickup Stainless Steel VIB-16750-BK 1932 pass 7 1932-34 pickup Gloss Black VIB-16750-SK 1932 hood latch screw kit Stainless steel, for 4 latches

1935 Hood moulding set

DAL48-16722-S Hood moulding set, (stainless steel), 1935 Passenger, (8 pieces with moulding clips)

Bonnet Side Hinge Rod

Fits: 1932-1936 Car, 1933-1937 Pickup

Polished stainless steel, for free opening hoods. 2 required. 39" long can be cut to length. BDB-16630 If You're Running a Hood Top Only No Hood sides? No Problem! This fits Most Street Rod Applications, Steel Construction, All Stainless Hardware. PART NO. Model Size DF29LHL 23 to 31 Ford 37 to 38 Chevy 24" to 30" DF32LHL 32 Ford, 36 Dodge 31 to 36 Chevy 30" to 36" DF33LHL 33 to 36 Ford 32 & 33 Plymouth 36" to 42"

Lift-Off Latch Kit

Bonnet Side Panel Clips ROOTLIEB BRACE KITS

A Great Complement to our hood hinge and latch kits. These 3/8" diameter, solid steel hood braces (two per kit), will Improve your hood support and alignment for a smooth and safe operation. Braces come complete with flush head stud mounting kit and detailed instructions. We have the largest selection in sizes and models for cars and trucks. RLHB2930C 29 to 30 Chevy RLHB32C 31 to 32 Chevy RLHB35 34 to 35 Chevy and Master RLHB36C 36 Chevy RLHB2627 26 to 27 Ford RLHB29 28 to 29 Ford RLHB2932 29 Ford w/32 Shell RLHB3031 30 to 31 Ford (and w/32 Shell) RLHB32 32 Ford and 33 Chevy Mercury RLHB3334 33 to 34 Ford and 33 Chevy Master RLHB3334T 33 to 34 Ford Truck RLHB35 35-36 Ford RLHB3536T 35 to 37 Ford Truck RLHB33PD 33 to 34 Plymouth / Dodge RLHB35PD 35 Plymouth-36 Dodge RLHB36P 36 Plymouth RLHB35D 35 Dodge

Fits: 1932 Car, 1932-1934 Pickup

Set includes all 4 panel clips, 12 special threaded rivets with kep-nuts and 4 rubber bumpers. BD18-16750-SS Stainless Steal BD18-16750 Painted Black

Bonnet Side Centre Rest Bracket

1932 Ford Car & 1932-34 Pickup

Each pair is heavy gauge polished stainless steel. Can be painted for original cars. A must for supporting hood side panels and eliminating road rattles. Fits on top frame rail just under the hood handle area. Rubber bumpers are sold separately in B-16761 12 pc. Hood Bumper Kit BDB-16761-SS

Hood Prop Kit for 3-Piece Hoods

Each Kit Includes: Prop Rod, Flat Top Ball Joint 2 Tabs & Nuts, Quick Disconnect Ball Joint, and Prop Clip. Hood Prop Kit for 3-Piece Hoods

DFHL-3PC

1936 Hood Catch Bumpers

Sold in pairs. BD68-16628-K BD68-16628-KS BD68-16759-K BD68-16759-KS Black - Front. Stainless Steel - Front Black - Rear Stainless Steel Rear

Hood Prop Kit for 4-Piece Hoods

407

Each Kit Includes: Front or Rear Mounting Options Long and Short Rubber-Coated Prop Rod and Radiator Rod Mounting Hooks. Hood Prop Kit for 4-Piece Hoods DFHL-4PC

HINGES & LATCHES

1934-37 Hood Handles

Stainless Steel. Fits 1934-36 car and 1935-37 pickup. Great for street rods. Set of 4. (2 x right and 2 x left). 1934-37 Hood Handles BD48-16445/B-5

1937 Hood Ornament Handle & Base Kit

Made just like the original: highly detailed die-cast finished in flawless chrome. Mounting hardware included. 1937 Hood Ornament Handle & Base Kit BD78-8218-K

Secure hoods with a competition look. Kit permits quick removal of hood or deck. Two chromed safety pins, scuff plates and necessary hardware are included in each kit. Overall pin length is approximately 4" with 21/2" of threads. WITH SCREW-ON SCUFF PLATES MG1016 7/16"-20 thread­safety pins. MG1018 1/2"-20 thread­torsion clips (NASCAR style)

HOOD AND DECK PINNING KITS

1933-48 Boot Hinges

Fits Roadster, Coupe & Cabriolet Easy to install. Our unique shoulder bolt makes deck lid removal a snap. Polished stainless steel. Sold in Pairs. BD40-713570-AK 1933-'34 cast steel BD40-713570-AS 1933-'34 polished stainless BD48-713570-AS 1935-'36 polished stainless

SUPER SECURITY HOOD LOCK KIT

Billet Hood Adjusters

This super security hood lock kit utilizes a cylindrical key lock mechanism which is virtually pick-proof. The kit includes two chrome plated lock sets, two fully threaded lock pins with four nuts and two keys. This kit must be used in conjunction with the factoryhood latch assembly; it is not for use as the only hood retention mechanism. MG1472 Super Security Lock Kit

Trunk Hinge Kit

Glove Box Door Hinge

VI40-701662

1933-34

Glove Box Door Bumpers Cowl Vent Covers

Your car will stand out with this sophisticated upgrade. Mustang Cowl Vent Covers in plain aluminium finish which can be polished or painted to match your car. Available for 1967-68 Mustangs only. 1967-68 Mustang Cowl Vent Covers RING67-MCVC

VI48-701671-L 1935-48 thick for large gaps VI48-701671-S 1935-48 thin for small gaps

BONNET PINS & VENTS

WINGS, LATCHES & DOORS

UNIVERSAL REAR SPOILER KIT

1965-1970 Mustang Hood Pin Kits

These unique hood pins are yet another awesome modification you can use to set your car apart. Ring Brothers Hood Pin Kits are available for 1965-1970 Mustangs in Round or Tear Drop style. Kits include all hardware and installation instructions and are available with silver or black hood plates. Custom installation bases are available. (Can be used for custom installation of the Ring Brothers Hood Pin Kit on many other models.) Description Part No. Round Hood Pin Kit ­ Silver Hood Plate RING65-70MHPRS Round Hood Pin Kit ­ Black Hood Plate RING65-70MHPRB Teardrop Hood Pin Kit ­ Silver Hood Plate RING65-70MHPTS Teardrop Hood Pin Kit ­ Black Hood Plate RING65-70MHPTB

Moroso's universal rear spoiler kit provides down force to the rear wheels for improved high speed stability. It can be trimmed to fit most applications and comes complete with support struts, mounting Billet Show Quality Hood Hinges brackets, hardware and detailed instructions. Untrimmed dimensions: Ring Brothers show quality billet aluminium hood hinges are available in easy to polish plain aluminium or black anodized finish 57" length, 12" width and 24" struts. and can be plated by a plating specialist. Available for steel or MO78740 Universal Rear Spoiler Kit fibreglass hoods they are shipped in pairs, complete with all parts and instructions necessary for quick installation.

1967-1969 Camaro/Firebird

One Piece Rear Wing

Measuring 10" deep x 40" wide, this wing features 1/4" thick mount tabs with 3/8" diameter front and 5/16" diameter rear holes with a 3-1/2" spacing. Includes swept teardrop style tip plates. One Piece Rear Wing 40" Wide PWC42-118-B-10

Floor Access Door

Easy to install door for access to under floor master cylinder. Quality stainless steel construction. Hinged on one side with a cam latch on the other side. Great for Model-A or any car with a master cylinder under the floor. Outside of door frame measures 5" x 8". Stainless Steel Floor Access Door CHEAS-6028

Description 1967-69 Camaro Silver Hinges for Steel Hoods 1967-69 Camaro Silver Hinges for Glass Hoods 1967-69 Camaro Black Hinges for Steel Hoods 1967-69 Camaro Black Hinges for Glass Hoods

Part No. RING67-69CHSS RING67-69CHSF RING67-69CHBS RING67-69CHBF Part No. RING70-81CHSS RING70-81CHSF RING70-81CHBS RING70-81CHBF Part No. RING65-66MHSS RING65-66MHSF RING65-66MHBS RING65-66MHBF Part No. RING67-70MHSS RING67-70MHSF RING67-70MHBS RING67-70MHBF Part No. RING55-56CHSS RING55-56CHSF RING55-56CHBS RING55-56CHBF

1970-1981 Camaro/Firebird

Description 1970-81 Camaro Silver Hinges for Steel Hoods 1970-81 Camaro Silver Hinges for Glass Hoods 1970-81 Camaro Black Hinges for Steel Hoods 1970-81 Camaro Black Hinges for Glass Hoods

1965-1966 Ford Mustang

Description 1965-66 Mustang Plain Hinges for Steel Hoods 1965-66 Mustang Silver Hinges for Glass Hoods 1965-66 Mustang Black Hinges for Steel Hoods 1965-66 Mustang Black Hinges for Glass Hoods

1967-1970 Ford Mustang

QUICK RELEASE HOOD PIN SET

PWC73-484

408

A quick, self-contained hood clamping device with no pins or lanyards to lose or cause hood damage. Features 3/8" diameter aluminium pins and easy bolt-on installation. May be used for many other applications where quick access to a trouble spot is absolutely essential. Two per set, we recommend 6 to 8 to a hood. Quick Release Hood Pin Set MO39010

Escape Hatch Latch

Description 1967-70 Mustang Silver Hinges for Steel Hoods 1967-70 Mustang Silver Hinges for Glass Hoods 1967-70 Mustang Black Hinges for Steel Hoods 1967-70 Mustang Black Hinges for Glass Hoods

Positive locking and easily released, these latches are constructed of stainless steel for corrosion resistance and feature a long hook for ease of opening. Escape Hatch Latch ­ Long Hook

1955-1956 Chevrolet

Description 1955-1956 Chev Silver Hinges for Steel Hoods 1955-1956 Chev Silver Hinges for Glass Hoods 1955-1956 Chev Black Hinges for Steel Hoods 1955-1956 Chev Black Hinges for Glass Hoods

BODIES, PANELS & EXTERIOR ACCESSORIES

For use on almost any application - our hood adjusters are the best looking piece on the market. Available in natural finish or grey anodized. You will need 0.875" clearance for the short adjusters or 1.25" clearance for the tall adjusters to work. Description Part No. Short Hood Adjusters ­ Natural Finish RING875-BHAN Short Hood Adjusters ­ Grey Anodized RING875-BHAG Tall Hood Adjusters ­ Natural Finish RING125-BHAN Tall Hood Adjusters ­ Grey Anodized RING125-BHAG

The AutoLoc Universal Trunk Hinge Kit takes the difficulty away from designing a custom functional trunk! Make your vehicle's trunk function properly and appear professional. The specially designed J-arms get rid of ugly factory hinges and ensures trunk clearance when opening. J-arms are available in machined steel or aluminum so they can be painted to match or polished. AutoLoc provides everything needed to get the job done right. A-TRH Trunk Hinge Kit Chrome A-TRHC Trunk Hinge Kit Paintable

Heavy Duty - UDS

· Anti Wobble Design · Motorized Operation Available · Hardened Steel Construction · CAD/CAM Designed · 5 Fully Adjustable Points · Smooth Operation · Adjustable Stop Points · Detailed Instructions A-UDS130 130º Manual Lambo Door A-UDSD130 130º Motorized Lambo Door A-UDS90 90º Manual Lambo Door A-UDSD90 90º Motorized Lambo Door

1928-32 Door Hinges

Door hinges for Roadster, Pickup & Phaeton are sold as complete sets of 2 Pairs. Hinges for 3 window coupe are compete sets of 3 pairs. Description Part No. 1928-29 Roadster, Pickup & Phaeton Front Hinges BRA-35600-A 1930-31 Roadster, Pickup & Phaeton Front Hinges BRA-35600-B 1932 Roadster Door Hinges BRB-35600 1932 3 Window Door Hinges (3 Pairs) BRB-25600

Trunk and Rumble lid hinge kits for 1928-32 Coupe & Roadster. Sold as complete kits including hinges, brackets and fasteners. Description Part No. 1928-31 Coupe & Roadster Trunk Hinge Kit BRA-1059-ABTH 1928-31 Coupe & Roadster Rumble Hinge Kit BRA-1059-ABRH 1932 Roadster Trunk Hinge Kit BRB-1059-TH 1932 Roadster Rumble Hinge Kit BRB-1059-H 1932 3 Window Trunk Hinge Kit BRB-2059-TH

1928-1932 Trunk & Rumble Hinge Kits

Stainless Steel Door Hinge Pins

High Quality stainless steel hinge pins for 1928-48 Ford. Polished tops, identical to the originals UPA6211 0.275" dia x 1-1/2" long 1932-48 Ford UPA6237 0.25" dia x 1-13/16" long 1928-31 Ford

Flip Flop Trunk!

Split Hood Kit

The Flip Flop Trunk Conversion Kit is a custom modification that takes no time at all! Give your car a trick look that will get attention where ever you go. Great for showing off sound systems, hydaulics or air suspension in your trunk. Milled from heavy duty aluminum that resists rust and can be polished to a high luster. Aluminum body has predrilled, countersunk holes to clear trunk bolts. Also includes 2 spring loaded safety pins. Comes with detailed instructions. Universal kit designed for square shaft trunk arms. A-FLIPTR Flip Flop Trunk Kit

BODIES, PANELS & EXTERIOR ACCESSORIES

Get the awesome custom look you've seen at import car shows all over the country. Split hoods are the latest craze. Don't be left out! Autoloc's 4 hinge split hood kit works for all models of cars and trucks. Use AutoLöc's Split Hood Kit to open your hood directly down the middle, zig zag, or however you desire. The kit will require cutting or welding. Professional installation recommended. AutoLöcTM is not responsible for damage to your hood by improper cutting. Includes detailed instructions A-SPHOOD Split Hood Kit

Billet Knob Set

AutoLoc's Billet Latch Release Knob for Bear Claw Latches allows you to open your door from the inside with one touch. Great way to give your interior that smooth, custom look! All billet aluminum construction and custom made to ensure a lifetime of smooth operation. Detailed instructions included. A-BCKNOB - Billet Knob Set

Door Latches Open Car

Sold in pairs VIA-35655/56-AR 1928 roadster & phaeton with chrome arm

Tilt Hood Kit

The AutoLöcTM Tilt Hood Kit allows your hood to tilt forward, offering a totally custom look, and provides improved access to the engine compartment. Professional installation recommended. Includes detailed instructions and a Limited Lifetime Warranty. A-TILTHD

VIA-35655/56-B 1929/31 roadster & phaeton

VOODOO LAMBO DOORS

Door Check Strap Kits

AutoLoc'sTM revolutionary Voodoo Door HingeTM takes custom doors to new levels with an incredible FOUR (4) different types of door movement! The Voodoo HingeTM provides both forward and rear vertical lambo door movement, as well as forward and rear suicide style movement. The Voodoo'sTM vertical lambo door movement allows for unlimited door rotation (both forward and backward), with more body and fender clearance than any other lambo style door on the market. The suicide movement of the Voodoo HingeTM also provides industry-leading clearance, with full 180º suicide hinge movement (both forward and backward). Give your car a totally unique and custom look, and raise your doors to new heights today with the AutoLocTM Voodoo Door HingeTM. A-VDX3500 1800 + Lambo Vertical Door System

Leather strap kit includes polished stainless steel retainer plates and stainless steel screws. VIA-702828-S 1928-32 open car VIB-702828-S 1932-48 metal arm type with rubber cushions

Suicide Hinge Systems

ONLy ! 2" THICk

Do you want to have the ability to open your doors backwards 90°? AutoLöc's revolutionary Suicide Hinge System offers rugged, heavy duty all steel construction with Zero-Flex Hinges and 3/8" hinge pins. Our unique notch design and adjustable mounting holes insure proper door alignment. Self lubricating bushings provide years of trouble free operation. Sold in pairs (for 2 doors) with recessed door pockets, mounting hardware, and extra bracing. Three models are available: HDHINS (independent), HDHIN (standard) and HDHIND (deluxe.) The deluxe system is fully adjustable for fine tuned alignment after mounting. The superior system features independant hinges, thicker and stronger construction, deeper hinge pockets and more range. Universal sizing; cut and weld to desired size. Kits are shipped with detailed instructions. Please note that professional installation is recommended.

Interior side

Exterior side

DeadLöc Door Safety System

Independent System

· Thicker & Stronger Construction · Deeper Hinge Pockets · Zero-Flex Hinges A-HDHINS Independent System

Prealigned Standard/Deluxe System

AutoLöc's Suicide Door DeadLöc Safety System increases the safety and security of your passengers. Thick aluminum plates and unique locking cam design provide a long life of smooth operation. System comes complete with all necessary hardware. Available with remote and ignition activation. Great for all types of doors including cargo, sliding, and overhead. Three models are available: the DL1000 (manual operation), the DL2500 (electric operation), and the DL2550 (electric operation w/LED status indicator.) Quality made in the USA A-DL1000 Manual A-DL2500 Deluxe Electric A-DL2550 Deluxe Electric w/LED A-DLKB Billet Knob w/ Flame Logo

· Zero-Flex Hinges ·Adjustable Design ·Welded Alignment Rod Guarantees Proper Alignment A-HDHIN Prealigned Standard System A-HDHIND Prealigned Deluxe System

Interior side

Ultra Thin Slim Line - UDST

409

· Slim Design · Motorized Operation Available · Hardened Steel Construction · CAD/CAM Designed · 5 Fully Adjustable Points · Smooth Operation · Adjustable Stop Points · Detailed Instructions A-UDST 130º Slim Line Manual Lambo Door A-UDSTD 130º Slim Line Motorized Lambo Door

Exterior side

Bear Claw Specifications

BCSM-Small Latch

GRILLE SHELLS, INSERTS & MOULDINGS

EARLy FORD

Vintique Early Model A 1928 -29 Radiator shell

Dual Rotor Bear Claw Door Latches

Double rotor door latch with both right or left side pulling mechanism for driver and passenger doors. Door pins included.**Sold in pairs. DAKBCL-2 Left and Right Dual Rotor Bear Claw Door Latches.

High quality stamped steel radiator shells VIA-8200-SC 1928-29 smooth chrome plated VIA-8200-S 1928-29 smooth Unplated

UPI Early Model A 1928 -29 Radiator shell

BCLG-Large Latch High quality stamped chrome plated steel radiator shells UPA-3009 1928-29 no wire holes

Female Door Dovetails

Includes stainless steel mounting screws. VI18-35576-BS 1932-36 roadster & phaeton, gloss black VI18-35576-SS 1932-36 roadster & phaeton, stainless steal VIB-35576-BS 1932-34 closed car & Pick up, gloss black VIB-35576-SS 1932-34 closed car & Pick up, stainless steel

Model A Stone Guards

DALB-35576-SS 1932-36 Open car Female Dovetails, (polished stainless steel), 1932-36 Open Car, sold as pair. DAL40-35576-SS 1932-36 Closed car Female Dovetails, (polished stainless steel), 1932-36 Closed Car, sold as pair.

Male Door Dovetails

Includes stainless steel mounting screws. VI18-35577-SS 1932 closed, 32-34 pickup, 30-31 slant & 4 Door VI40-35577-ASS 1933-40 closed, 351-41 pickup, 1932 3 window VI40-35577-BSS 1932-36 roadster & phaeton VI11A-35577-A 1941-48 all bodies, 1942-52 pickup (Cad plated) VI11A-35577-ASS 1941-48 all bodies, 1942-52 pickup polished S/S VIA-76819-A 1928-31 coupes & tudors, 1928-34 roadster pickup

These high quality installation kits make Bear Claw latch installation a snap! Heavy duty all steel construction. Each kit includes door section mounting plates with die stamped mounting holes. Kit also includes floating striker bolt plates to insure easy alignment and installation. Available for small and large bear claw latches. A-BCINST-S - Small Latch Install Kit A-BCINST-L - Large Latch Install Kit A-BCTR

1932 FORD

DALB-8151-A Grille Bars, (Plain Steel), 1932 Passenger, sold as each DALB-8151-SS Grille Bars, (Stainless), 1932 Passenger, sold as each

Striker Plates

Extellent Quality. B-,40-,81- include stainless steel screws 01A-, 011A are spring loaded like originals.

A-BCTR2

Hood/Trunk Latch Kit

Black Oxide finish Strikers

VIB-702340 VI40-702340 VI81A-702340

1932 3 window & sedan del 1932-34 closed, pickup &1937 panel truck 1935-39 passenger &1935-52 Pickup

The BCTR is one tough latch assembly! Designed with durability and reliability in mind, it will latch on to your vehicle's hood or trunk securely and provide you with peace of mind. Great for custom applications! A-BCTR - Hood Latch A-BCTR2 -Trunk Latch

Dales 1932 Grille Inserts

Polished Stainless Steel Strikers

VI40-702340-SS 1932-34 closed, pickup &1937 panel truck VI81A-702340-SS 1935-39 passenger &1935-52 Pickup

Chrome Steel Hood Latch

Fits Camaro 1967 up to 81 RPCR9473

Power Bear Claw Latch System

Available with Remote Operation! The Power Bear Claw Latch System is a bolt-in kit that will pop your vehicle's door open with the push of a button. Only two wires to power up! All of the features of the Power Bear Claw come in two compact units that will operate two vehicle doors. The kit includes two reliable 13lb AutoLöcTM Actuators, two bear claw latches and a heavy duty mounting bracket. Available in small or large systems. Includes detailed instructions A-BCSMP - Small Power Bear Claw A-BCLGP - Large Power Bear Claw

DALB-8200-IC Grille insert, (Stock Height) 100% polished stainless steel bars, frame, trim & crank hole, 1932 Passenger. DALB-8200-ID Street Rod Grille insert, (Stock Height) 100% polished stainless steel bars, frame, Bars & trim, No crank hole, 1932 Passenger.

1932 Grille Trim Ring

Fits at the back of the grill shell on 1932 Passenger cars. DAL18-8234

Standard Latch Kits

Large Latch

The BCLG features a double rotary "claw" latch insuring maximum performance and durability. AutoLöc's Bear Claw Door Latching System includes two heavy duty latches, and two trouble free striker bolts. A-BCLG - Large Bear Claw Latch

Camaro Door Strikers

Want a subtle update for your car? Check out our Camaro door strikers. The plate is crafted from billet aluminium and anodized grey. The post is stainless steel for durability. 1967-81 Camaro Door Strikers RING69-81GMDS

Vintique 1932 Radiator shell Grille Trim

VI18-8234 1932 S/S

Vintique 1932 Grille Inserts

Small Latch

The BCSM is built tough like its big brother but smaller in size for compact applications. It features a single rotary "claw" latch. System includes two heavy duty latches, and two trouble free striker bolts. A-BCSM - Small Bear Claw Latch

Mustang Door Strikers

410

Finally there is an alternative to the original door latch striker. Crafted from stainless steel for strength and beauty. These strikers are a direct replacement for the stock striker. All hardware is included. Description Part No. 1965-66 Mustang Door Strikers RING65-66MDS 1967-70 Mustang Door Strikers RING67-70MDS

All polished stainless steel with mounting hardware VIB-8200-SR Street rod style without crank hole VIB-8200-OS With crank hole

1932 Steel Radiator Shell - Hot Rod

Die stamped steel. Available filled hot rod style with no opening for radiator cap, or with holes for radiator cap and crank. VIB-8200-HRS 1932 Hot Rod (No holes) Grille Shell VIB-8200-OGS 1932 (With holes) Grille Shell

BODIES, PANELS & EXTERIOR ACCESSORIES

Bear Claw Installation Kits

All Polished 304 Stainless Steel Frame & Mesh. Polished Stainless Steel Hardware Kit VIA-18700-A 1928-29 VIA-18700-B 1930 VIA-18700-C 1931

1936 FORD

1936 Horn grille cover 1932 Grille Shell

1932 Grille Shell, Filled Top, Steel BRB-1620

1939 Deluxe Grille Trims

DAL68-8157 Center gille moulding, (polished stainless steel) 1936 Passenger, sold as each

Vintique Firewall Support Rod Brackets

1936 Outer grille trim

Highly polished stainless steel. Includes special stainless steel threaded rivets for easy instalation. VIB-8140/41-S 1928-32 passenger & 1932-34 pickup

DAL68-8184/5 Outer grille trim mouldings, (polished stainless steel) 1936 Passenger, sold as pair

Brand new. Precision roll formed of high quality stainless steel. 24 piece kit comes with mounting hardware. Includes mounting clips. Available with centre strip in kit or seperate. BD91A-8332-K Grille Trim Kit 24 Piece ( No Centre Strip) BD91A-8332-KC Grille Trim Kit 25 Piece (Includes Centre Strip) BD91A-8168-B Gille Centre Trim

Radiator Shell & Hood Ornaments

Die cast & chrome plated

1936-37 Grille Trim Clips

Made from high quality spring steel. 1936-37 Grille Centre Trim Clips (6) 1936 Grille Outer Trim Clips (16)

BD68-20001 BD68-20002

1932 with hardware

VIB-8215

1934 Passenger

VI40-8215

1936-37 Grille Trim Clips Bob Drake Radiator Support Rod Firewall Brackets

Holds ends of the radiator braces in place. All Stainless Steel. Includes Hardware. Suits 1933-39 cars and 1935-39 pickups. BD40-8140/1-SS 1933-39 Radiator Support Rod Brackets

Retaining clip kits for 1936-37 Grille trims. BD68-20001 1936-37 Grille Centre Trim Clips (6 Pack) BD68-20002 1936 Grille Outer Trim Clips (18 Pack)

1936 Grille Assemblies

1936 Passenger

VI68-8215

UPI Firewall Support Rod Brackets

No hardware included UPA8038 1928-32 Stainless Steel Cars 1932-34 Stainless Steel Pickup

BODIES, PANELS & EXTERIOR ACCESSORIES

Stainless Steel Radiator Support Rods

DAL68-8200 Grille assembly, plain steel, original style with crank hole, imported, 1936 Passenger, each DAL68-8200-PWOC Grille assembly, plain steel, on crank hole, street rodders choice, 1936 passenger, each DAL68-8200-CH Grille assembly, USA chrome, original style with crank hole, imported 1936 Passenger, each DAL68-8200-CWOC Grille assembly, plain steel, on crank hole, street rodders choice, 1936 Passenger, each

1935 Passenger

VI48-8215

SO-CAL Bullnose

Highly polished stainless steel rods, includes nuts & washers UPA6201 1928-31 Model `A', 26" long UPA6203 1932-39 32.5" long

Support Rod Thread Cover Set

Fits all support rods, set of 4, 2 long ones cover thread at the end of rods and 2 short ones cover the thread of the head of rods. Sold as set. UPA6231 1928-39 Thread Cover Set

The SO-CAL Bullnose is investment cast in stainless steel and polished to a high luster. Shaped to fit the Brookville filled `32 grille shell, it can also be easily formed to fit your filled shell, that's very important because not all filled shells are the same profile. Remember, die cast bullnoses cannot be formed to fit your shell. NOTE: Emblem not included with this bullnose. SO001-60200 So-Cal Bullnose

1936 Radiator Pan

SO-CAL Bullnose Emblem

1934 FORD

Quality die stamped metal. Helps cooling by directing air into radiator. BD68-16554 1936 Radiator Pan

1937 FORD

1937 Outer grille trim 1934 Chrome Grille

DAL78-8184/5 Outer grille trim stainless strips 1937 Passenger, sold as pair

This grille is truly a quality piece. Our dies are made to exact specifications to create a grille that needs no body work. BD40-8200

1937 Grille trim set

Available to fit the bullnose are two different styles of emblem: the regular Ford script emblem, available in red, blue or black and a solid silver SO-CAL emblem. The SO-CAL emblem is available in black on silver only. VIB-8212 Ford Script Blue SO011-B-8213 Ford Script Black SO001-62008 SO-CAL Script Silver on Black SO011-B-8214 Ford Script Red

DAL78-8200-GTS Grille trim set, (polished stainless steel), includes centre strip, 2 outer strips, top horizontal strip & 2 corner caps, 1937 Passenger (set)

Radiator Shell Emblems

Blue Porcelain and chrome plated edge same as original. UPA3003 1928-30 Blue Cloisonne UPA3006 1933-34 1934 Pass & 1938 deluxe

Radiator Shell Emblems 1937 Center grille moulding 1933-34 Grille Panel

This pan bolts in behind the grille bottom to aid in cooling by directing air flow to the radiator. BD40-8240-S 1933-34 Grille Panel DAL78-8157 Center grille moulding, (polished stainless steel) 1937 Passenger, sold as each

1934 Grille Border Trim

1937 Center assemblies

Made of polished stainless steel and fits around the inside of the grille shell. Includes coupler clips and our special designed "T" bolts. 1934 Grille Border Trim BD40-8234

DAL78-8200 Grille assembly, plain steel, original style with crank hole, imported, 1937 Passenger, each DAL78-8200-PWOC Grille assembly, plain steel, on crank hole, street rodders choice, 1937 passenger, each DAL78-8200-CH Grille assembly, USA chrome, original style with crank hole, imported 1937 Passenger, each DAL78-8200-CWOC Grille assembly, USA chrome, on crank hole, street rodders choice, 1937 Passenger, each

these emblems are manufactured to the high standards of the Ford motor company. Each is an official licenced product . Blue cloisonne (glass) colour is used as original. Each has proper mounting stud or clip as required. VIA-8212-A 1928-30 blue cloisonne VIA-8212-B 1931 chrome with blue lettering VIA-8212 1932 pass & 1932-35 pickup VI18-8212 1933 passenger VI40-8212 1934 Pass & 1938 dlx. 90hp VI48-8212 1935-36 pass, 1936 pickup & 1938 std 90hp

1934 Grille trim ring

DAL40-8234 Grille trim ring, (stainless steel complete with mounting clips),1934 Passenger

1938 Deluxe Hood Side Emblems

Die cast and chrome plated. Sold as pair VI81A-16605/6 1938 deluxe

Front Fender Tie Brackets

Die cast. these clamps the front fenders together under the front grille. All hardware included. VI40-16088-B 1933-34 Painted Black VI40-16088-C 1933-34 Chrome Plated

Hood Side Emblems

1934 Grille crank hole cover

1939 FORD

1939 Grille assemblies

DAL91A-8200 Grille assembly, plain steel, original style with crank hole, 1939 Deluxe, each

DAL40-8216-B Grille crank hole cover (chrome plated), 1934 Passenger.

Die Stamped chrome plated. Includes mounting clips VI91A-16606 Ford Script 1939 deluxe, 1940 std & pickup VI91A-16607 Deluxe Script 1939 deluxe, 1940 std & pickup VI01A-16606-C Ford Script 1940 Red sides VI01A-16607-C Deluxe Script 1940 Red sides

Chrome Die Cast Emblems

Chrome Ford Emblem

Chrome script emblems. Stud mount, clips included For Ford 1940, and also for 1953-56 Pickup tail light lens. UPA6108 1939 deluxe standard & pickup

1934 Grille trim ring clip

DAL40-8234-CL Grille trim ring clip, (stainless holds trim ring together at bottom),1934 Passenger

1935 FORD

1935 Grille trim set

DAL48-8234 Grille trim set, (stainless steel complete with all mounting hardware),1935 Passenger set

DAL91A-8200-PWOC Grille assembly, plain steel, on crank hole, street rodders choice, 1939 Deluxe, each DAL91A-8200-CH Grille assembly, USA chrome, original style with crank hole,1939 Deluxe, each DAL91A-8200-CWOC Grille assembly, USA chrome, on crank hole, street rodders choice, 1939 Deluxe. each

Chrome Blown Emblem

UPS1010

Universal Application

411

Chrome Cruisin Emblem

UPS1011

Universal Application

Chrome Pro Street Emblem

UPS1012

Universal Application

1936 Horn Grille Turn Signal Kit

Chrome Turbocharged Emblem

UPS1013 Universal Application

Turn signal lamps with attractive chrome grille. 1936 Horn Grille Turn Signal Kit BD68-16156-BT

Cowl Lacing Kits

VIB-16740-S VI40-16740-S VI48-16740-S VI68-16740-S

Chrome Hotrod Emblem

UPS1001

1932 passenger & 1932-34 pickup 1933-34 passenger 1935 passenger, 1935-37 pickup 1936 passenger

Universal Application

Chrome Streetmachine Emblem

UPS1002 Universal Application

Cowl Lacing Kit

Chrome Streetrod Emblem

UPA6202

Original style woven lacing as Henry used. Includes mounting hardware. VIA-16740-AS 1928-29 VIA-16740-BS 1930-31

Universal Application

Head Light Bar Emblem

Die cast chromed V8 Emblem VI18-13122 1932 Ford

Exterior Aluminum Trim

A perfect custom touch for a filled shell. Emblem sold separately. BDB-8215-BN 1932 Bullnose Ornament

1932 Bullnose Grille Shell Ornament

Clayton Machine Works exterior aluminium trim is made from 6063 billet and is easily shaped to any contour. The kit includes - 2 x 8ft, 2 x 6ft 2 x 4ft pieces with 3M high strength adhesive backing for easy installation - no drilling required (can be drilled & tapped if needed). Exterior Aluminium Trim Kit CLA-ETK1

VIHR-16739 VISR-16739 VIHR-16740 VISR-16740

Made of high tech rubber with pressure sensitive adhesive backing. 8 foot lengths. Radiator Lacing 3/8" Wide, 3/16" Thick Radiator Lacing 3/8" X 3/16" Half Round Cowl Lacing 5/8" Wide, 3/8" Thick Cowl Lacing 39/64" X 23/64" Half Round

Cowl & Radiator Lacing For Street Rods

Trunk & Rumble Lid Seals

Machined, welded stud, correct curves, bright chrome and great detail all contribute to our perfect emblem. Fits in Grille and Hood Ornaments. Beautiful duplications of the original blue and chrome cloisonné. Also available in custom colours. BDB-8212 Fits Original Style Ornaments - Blue BDB-8212-B Fits Original Style Ornaments - Black BDB-8212-R Fits Original Style Ornaments - Red BDB-8212-W Fits Original Style Ornaments ­ White BDB-8212-STR-B Fits Bullnose Style Ornaments - Blue BDB-8212-STR-B Fits Bullnose Style Ornaments - Black BDB-8212-STR-R Fits Bullnose Style Ornaments - Red BDB-8212-STR-W Fits Bullnose Style Ornaments ­ White

1933-34 Body Number Plates

Sold each. Die stamped aluminium, extra fine detail. Includes 2 rivets, attaches to firewall. 1933-34 Body Number Plate BD40-14002 1936 Body Number Plate BD68-14002

Body to Frame Bush Set

1933 Passenger, 1933-34 Pickup Grille Emblem

RUBBERS & LACING

1935 Bumper Grommets

High density rubber bush kit, 34 pieces for 1937-40 Fords. VI78-5001 1937-40 Body to Frame Bush Set

Ready to install V8 grille emblem has a nice chrome finish. Comes with a background painted field. Includes mounting plate and hardware. BD40-8217-A 1933-34 Pickup Grille Emblem

1934 Passenger V8 Grille Emblem

DAL48-17772-S Front bumper arm grommets, (moulded rubber), 1935 Passenger, sold as pair

VIB-16761-S

Two piece construction chrome V8 emblem with a "no peel" blue painted "V" background includes mounting plate and hardware. Studs are cast in place for a dead ringer repro. BD40-8221 1934 Passenger Grille Emblem

1936-38 Bumper Grommets

DAL68-17772-S Front bumper arm grommets, (moulded rubber), 1936-37 Passenger, &1938 Standard, sold as pair VIB-16761-S

1934 Pickup V8 Hood Side Emblem

Chrome plated with stud. BD46-16608

Hood Bumper kits

1935-36 Greyhound Ornament

Die cast and brilliantly finished with high lustre chrome plating. BD48-8215-G 1935 Greyhound Ornament BD68-8215-G 1936 Greyhound Ornament

Precision made kits feature exact shapes and details. 1932-36 kits have moulded material inserts like originals and attaching hardware. 1937-56 kits include attaching hardware. No mix or match. VIB-16761-SK 1932 pass & 1932-34 pickup (12 Pieces) VI40-16761-S 1933-34 (14 piece) VI48-16761-S 1935 pass 7 1935/37 pickup (16 piece) VI68-16761-S 1936 (26 piece)

1936 Bullnose Grille Shell Ornament

Chrome "Bullnose" style grille shell ornament. Emblem sold separately. BD68-8215-BN

1930-48 Windshield rubber seals

1935-36 Grille Ornament Emblem

Snap in emblem. Suits stock and Bullnose style ornaments. BD48-8212 1935-36 Ornament Emblem

1932-48 Deluxe Running Board Covers

1935-36 Pickup Hood

Side Emblem Die stamped with blue background. Includes mounting hardware. BD50-16606 1935-36 Pickup Hood Side Emblem

Made of high quality rubber. Each cover is exactly the same as the original, and have roll over lips that fit like a glove. Adhesive and instructions included. Sold as pair. VIB-16450/1 1932 VI40-16450/1 1933-34 VI48-16450/1 1935-36 VI78-16450/1 1937-38, 39 standard VI91A-16450/1 1939 deluxe, 1940 VI11A-16450/1 1941 VI21A-16450/1 1942-48

1941-48 Seals fit both Ford & Mercury VIB-701290 1932 (except 3 window) VI40-701290 1933-34 closed car 1932 3 window VI48-701290 1935-36 closed car & pickup VIA-37199-BS 1930-36 Open car lower edge seal

Door Bumpers

VIB-46440

1933-36 Pass 32-52 pickup goes in slots in door jamb

1936 Horn grille Pads

DAL68-16156-S Horn grille Pads, (moulded rubber with beaded edge), 1936 Passenger, sold as pair.

Radiator Shell Lacing Kits

1936 Horn grille cover

412

DAL68-16156-A Horn grille cover, (stainless steel), 1936 Passenger

Original style woven radiator lacing as henry used. Includes mounting hardware. VIA-16739-AS 1928-29 VIA-16739-BS 1930-31 VIB-16739-S 1932 passenger & 1932-34 pickup VI40-16739-S 1933-34 passenger VI48-16739-S 1935 passenger VI68-16739-S 1936 passenger

Cowl Vent Gaskets

Made of molded neoprene sponge rubber VIB-700616 1932 pass & 1932-34 pickup VI40-700616 1933-34 passenger & 1935-36 pickup VI48-700616 1935-36 passenger VI78-700616 1937-48 passenger

BODIES, PANELS & EXTERIOR ACCESSORIES

1932 Grille & Hood Ornament Emblems

Patent Number Plates

These attach to the firewall. Die stamped, includes rivets. These plates are photographically etched like the originals. VIA-18650 1929-31 VI40-18650 1932-34 VI48-18650 1935-36

Made from high quality extruded sponge rubber. VI40-713540 1932-34 coupes, roadsters & cabrio. Trunk or rumble seal VI48-713540 1935-36 all coupes trunk seal

Cowl Vent Screens

VI48-700590 VI01A-700590

1932 Windshield Upper Stanchions

1935-36 passenger 1933-34 pass & 1939-40 passenger

Head light bar / stand pads

32 Ford Open Car Windshield Frames

High quality rubber with moulded edges. UPA9014 1928-32 Rubber bar pad flat VIB-13130 1932 Pass & 32-34 Pickup rubber bar pad VIA-13130-AF 1928-29 Rubber bar pad flat VI40-13130 1933-34 pass, 1935-37 pickup

Available in both raw steel and chrome plated windshield frames for 32 Fords. Glass and hardware are not included. SO170-97004 32 Ford Chrome SO170-97005 32 Ford Raw

Die stamped from stainless steel. Complete with cups & liners. Left hand side has post mirror mounting hole. Stock stanchions have holes for wind wing brackets. Chopped stanchions do not have wind wing bracket holes. UPA6241 1932 FORD Stock Height UPA6244 1932 FORD Chopped 2" VI18-37136-SS Stock height VI18-37136-CHP Chopped 2 inches

1932-37 Headlight Pads

Fits between fender and headlight stand. Moulded rubber with bead, not a flat die cut style. BDB-13130 1932 Passenger, 1932-34 Pickup BD40-13130 1933-34 Passenger, 1935-37 Pickup BD48-13130 1935 Passenger BD68-13130 1936 Passenger

DUVALL STYLE WINDSHIELDS

Shok-Liner

The most stylish windshield frame on the market today. A classic finishing touch to any street rod. Supplied in bronzed finish ready for plating. Glass not included. RP31DV RP32DV RP33DV RP35DV 1931 Ford DuVall Windshield, with Center Bar 1932 Ford DuVall Windshield, with Center Bar 1933-1934 Ford DuVall Windshield, with Center Bar 1935-1936 Ford DuVall Windshield, with Center Bar

1933-34 Windshield Stanchions

These are cast brass, smooth castings, ready to paint or plate. Stanchions do not have the side curtain fastener holes. VI40-37136 Stock height VI40-37136-CHP Chopped 2 inches

Great between any metal-to-metal mounting applications like fenders, running boards, braces, panels and gas tanks. This specially designed rubber extrusion can be multi layered for a wide range of custom thicknesses. 1/8" thick x 2" wide x 25' long. BD-5010-A Shok-Liner ­ 25ft Roll

Windshield Side Arms

Die Cast Chrome Plated VIA-45463-S 1928-31 car & 1928-34 pickup VIB-45463-S 1932 passenger

BODIES, PANELS & EXTERIOR ACCESSORIES

Windshield Wing Nut

WINDSCREEN INSTALL KITS

Show quality, die cast, chrome plated. Both types 3/8' -24 tread UPA6013 1923-31 Open Car VIA-351000 1923-31 open Car VIB-351000 1932-36 Open Car

Kit includes rubber seal and 50 stainless steel flathead screws and lock nuts. Can be used on front or rear windows. Windscreen Install Kit, 1/4" Thick Windscreen Install Kit, 3/8" Thick

Windshield Frame Stud

MOC4901 MOC4902

Made with correct shoulder & tappered nut. Thread: 3/8-24 both ends. VIB-37158 1916-32 open car UPA8043 1916-32 Open Car UPA8043C 1916-32 Open car Chrome UPA8043SS 1916-32 Open car Stainless

1932 Door Scuff Plates

Polished stainless steel door scuff plates. Sold as pairs. Roadster & Phaeton ­ 23-3/4" BDB-138-1 5W Coupe, Tudor & Fordor Sedans ­ 34-1/4" BDB-338-1

WINDSCREEN FRAMES

Early Ford Closed Car Windshield Frames

1928-29 Open Car Windshield Frames

Description 1928-29 Round Plain 2" Chopped W/Shield Frame BRA-1070-A2

Wide range of closed car windshield frames for 1928 through to1936 Fords. Available in both raw steel and chrome plated windshield frames for 32 Fords. Glass and hardware are not included. SO170-97006 32 5-Window Coupe, Sedan & Victoria Chrome SO170-97007 32 5-Window Coupe, Sedan & Victoria Raw SO170-97008 1933-34Closed Car Chrome SO170-97009 1933-34Closed Car Raw SO170-97010 1935-36Closed Car Chrome SO170-97011 1935-36Closed Car Raw

1933-34 Windshield Regulator

Reproduction windshield regulator for 1933-34 Ford with wind out windshield. Includes mounting screws. Knob sold separately. VI40-701325 1933-34 Windshield Regulator VI40-701348 1933-34 Windshield Regulator Knob - Chrome

Windshield Frame Screw Kits

Brookville 1932 3 Window Coupe Windshield Frame

Stock height plain steel windshield frame for 1932 3 window coupe. BDB-45400-P 1932 Stock Height

1928-29 Round Chrome 2" Chopped W/Shield Frame BRA-1070-AC2

These are screws that hold the windshield frame together. These stainless screw kits are made for original frames. VIB-37111-SK 1928-34 closed car & pickup set VI18-37111-SK 1932-36 Open car set VI48-37111-SK 1935-39 closed car & pickup set

Brookville 1933-34 Windshield Frame

1928-29 Open Car Windshield Stanchions

Description Part No. 1928-29 2" Chopped Plain W/Shield Stanchions BRA-37138-AC 1928-29 2" Chopped Stainless W/Shield Stanchions BRA-37138-ACS

Stock height plain steel windshield frame for 1933-34 Roadster & Phaeton. BD40-37105-P 1933-34 Stock Height

Pivot Bolt & Nut Set

Polished Stainless Steel VIA-45475-SS 1928-32 Closed car & 1928-34 pickup 2 pair

Slide Arm Washer Set 1932-48 Windshield rubber seals

Chrome plated with plastic insert. VIA-45477-S 1928-32 Closed car & 1928-34 pickup Set

1941-48 Seals fit both Ford & Mercury VIB-701290 1932 (except 3 window) VI40-701290 1933-34 closed car 1932 3 window VI48-701290 1935-36 closed car & pickup

Slide Arm Nut

Die cast & Chrome plated UPA8008 1928-32 FORD VIB-45482 1928-32 Closed car & 1928-34 pickup

SO-CAL Windshield

413

Designed by Pete Chapouris and Jim "Jake" Jacobs, with a jump start from Chip Foose, the SO-CAL Windshield is a beautifully executed cast brass alternative that embodies classic roadster styling. Chopped just right and raked at 32 degrees, the SO-CAL Windshield has been hand-crafted to fit the `32 roadster (it covers the stock stanchion holes). It can be used with a stock cowl vent and windshield dam. NOTE: Due to the variances in body dimensions, the windshield will need custom fitting for each application. Comes complete with installation instructions and hardware. Glass and plating are not included. SO001-60420 So-Cal Windshield

Windshield Frame Cone Windshield Lower Stanchions

Include pads & hardware. Die cast chrome plated. VIB-37132-S 1932 roadster & phaeton.

Die cast, chrome plated VIA-37154-R 1916-31 Open Car VI18-37154 1932-36 Roadster & Phaeton UPA6014SS 1915-41 Ford UPA6017SS 1932-36 Ford

Windshield Finger Pulls

1932-34 Windshield Post Pads

Windshield post pads for 1932-34 Roadster & Phaeton. BDB-37132 1932 Windshield Post Pads BD40-711216/7 1933-34 Windshield Post Pads

Die cast and chrome plated. Includes stainless screws. Sold in pairs. VIB-37118-S 1928-31 Open Car VI18-37118-S 1932-36 Roadster & Phaeton

WIPER ACCESSORIES & ANTENNAS

Moon Chrome Bullet Wiper Post Covers

Universal. Comes with set screw and allen wrench for easy installation. MNAA900

Mirror Arms 1937 Trunk Handle

Precision die-cast and chrome-plated with threaded shaft and 2 keys.. 1937 Trunk Handle BD78-702352

Bob Drake 1937 Deck Lid Handle Wiper Stem Covers - Bullet

New original. Stainless steel. Key and cylinder not included. BD78-702352-S

Product Features - Precision machined from 6061-T6 billet aluminum - Industry leading mirror finish polish - Stainless steel 10-24 button head screws included with mirror arms BS72720 BENT ARM Left Top Mount / Right Bottom Mount BS72725 BENT ARM Right Top Mount / Left Bottom Mount BS72620 STRAIGHT ARM Left Top Mount / Right Bottom Mount BS72625 STRAIGHT ARM Right Top Mount / Left Bottom Mount

Not running wiper arms? Cover those posts with our polished billet wiper post covers. Choose from post style or screw-on styles. Sold in pairs. Applications: Post-Style 11/16" or smaller shaft Screw-on 8mm x 1.25 threaded shaft BS248210 Bullet Style / Screw On BS248215 Ribbed Style / Screw On BS248810 Bullet Style / Post Style BS248815 Ribbed Style / Post Style

Deck & Rumble Lid Handles

OFF SET OVAL VIA-702352 VI40-702352 VI48-702352-B VIA-702356-E VI48-702352-B

1928-31 Deck/Rumble Lid Handle ­ Locking 1932-34 Deck/Rumble Lid Handle 1935-36 Deck/Rumble Lid Handle 1928-37 Deck/Rumble Lid Handle Rubber 1938-39 Woody Tailgate Handle

OVAL OVAL

Billet Antenna

BS220020 BS220010

OBLIQUE

Profile Mirror Kits Billet Wiper Arms

Even on rainy days, look good with our polished billet wiper arms. Available in three lengths and either 5/8" spline or 7/16" threaded shaft. Sold in pairs including 18" polished stainless wiper blades. Description Part No. Billet Wiper Arms, 20-1/4" Long, 5/8" Splined BS242010 Billet Wiper Arms, 17" Long, 5/8" Splined BS242015 Billet Wiper Arms, 19-1/4" Long, 7/16" Threaded BS242020 Replacement 18" Stainless Wiper Blades BSRP2420

4" STREET ROD MIRRORS

· Stainless Steel · Sold in pairs · 2 Stud Mount 4" Retro Mirrors RPCR6615

4" CHROME MIRROR

EXTERIOR DOOR HANDLES

· Chrome Steel · Short Arm · Fits Driver or Pass. Side 3" Chrome Peep Mirror RPCR6608 4" Chrome Peep Mirror RPCR6610 4" Chrome Peep Mirror with long arm RPCR6609

Add timeless style with Billet Specialties new forged 6061-T6 aluminum mirror arms. Forged for ultimate strength, 3-D machined and mirror polished for style. Sold in pairs complete with your choice of round, oval, oblique and 3" or 4" diameter round offset mirror heads. Arms feature multiple mounting holes for a secure fit and can be mounted for top mount or bottom mount applications. Mirror heads feature a stainless steel swivel with a nylon bushing for smooth positive adjustment. Stainless hardware is included. BS74120 Profile Mirrors ROUND BS74520 Profile Mirrors OVAL BS74820 Profile Mirrors OBLIQUE BS74620 Profile Mirrors 3" DIA OFFSET ROUND BS74720 Profile Mirrors 4" DIA OFFSET ROUND BS74920 Profile Mirrors OFFSET OVAL

4.5" CHROME MIRROR

VIA-702350-0

· Chrome Steel · Straight Arm · Fits Driver or Pass. Side Chrome Mirror RPCR6611

PEEP MIRRORS

1928-29 Closed Car - Locking (Pair) VIA-702350-AL 1928-29 Closed Car - Non Locking (Each) VIA-702351-A 1928-33 Roadster & Phaeton (Each) VIA-702350-0 1932 Closed Car Except 3 Window & Cabriolet RH VIB-702350 1932 Closed Car Except 3 Window & Cabriolet LH VIB-702351 1932 3 Window & Cabriolet RH VI40-702350 1932 3 Window & Cabriolet LH VI40-702351 1933-34 Closed Car RH VI40-702350 1933-34 Closed Car LH VI40-702351 1932 3 Window & Cabriolet - Locking (Pair) VI40-702350/1-L 1933-34 Closed Car - Locking (Pair) VI40-702350/1-L 1932-34 Pickup VI46-702350-P 1935-36 Pickup VI50-702350 VIB-702351 VI40-702351

Outside Door Handles

Stainless steel mirror head. Chrome plated die cast arms Universal door edge mounting, fits left or right hand. UPC5001 4" Round Peep Mirror UPC5001-1 3" Round Peep Mirror UPC5007 4" Round Curved arm peep mirror

Mirror Heads

Billet Specialties mirrors will give your car that clean, high-tech look. The mirror heads feature the latest 3D machining and the arms work for both top and bottom mount. Mirror heads and arms are sold individually. Product Features - Precision machined from 6061-T6 billet aluminum - Industry leading mirror finish polish - High quality glass for distortion free viewing - Stainless steel swivel with a nylon bushing for smooth positive adjustment - Stainless steel 10-24 button head screws included with mirror arms BS73120 Round Mirror3-1/8 Diameter BS73320 Small Rectangle (1-3/4" x 4") BS73420 Large Rectangle (1-3/4 x 5-1/4") BS73520 Oval Mirror (2-5/16" x 4-3/16") BS73620 Offset Round (3" Dia) BS73720 Offset Round (4" Dia) BS73920 Offset Oval (2-5/16" x 4-3/16") BS73820 Oblique Left Side BS73825 Oblique Right Side

MALTESE MIRRORS

Maltese cross mirror Chrome plated die cast heads different arms available Sold as single mirror UPM1005 5-1/2" Straight Arm Mirror UPM1006 Peep Mirror Arm

SO-CAL Swan Neck Outside Mirror

VI40-702350/1-L

Features chrome die-cast swan neck arm with stainless steel miror head, held by bullet nut. Universal applications for all models. SO001-50100 Pair of outside mirrors SO001-50101 Passenger side mirror SO001-50102 Drivers side mirror

Hood Handles

1928-32 Stainless Steel Hood Handles (Pair) VIB-16609-SS

California Swan Style Mirrors

California Swan Style Mirrors with oval heads and two mounting studs. Sold as pairs. Swan Style Mirrors with Oval Head

BDHR-18402/3

Outside Door Handle Screw Kits

1928/34 S/S 4 pcs for metal frame doors 1928/34 S/S 8 pcs for sedans with wood frame doors

VIA-702350-SKM VIA-702350-SKW

Retro Swan Style Mirrors

BDU-18402/3

414

Retro Swan Style Mirrors with round heads and two mounting studs. Sold as pairs. Swan Style Mirrors with Round Head

BODIES, PANELS & EXTERIOR ACCESSORIES

Designed to fit Chevy, GMC, & Ford* trucks up to '98. Replaces the factory mast with a 18-1/2" polished stainless mast with billet aluminium ends giving you the same radio reception you have now. * Ford applications require adapter. Billet Antenna ­ 18-1/2" Long Adapter for Ford Applications

EXTERIOR MIRRORS

Post mounted

Has a threaded 1/4-20 stud. VIBA-17700-P Round Head VIBA-17700-AP Rectangle head ROUND 3" or 4" OFF SET ROUND

Door Hinge Pin Mirrrors

Stainless steel mirror heads with chrome cast arms. VIB-17741 1932 Closed Car VI46-17741 1932-34 pickup VI68-17741 1935-40 Passenger 1948-52 Pickup

Information

12 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

193361