Read Microsoft Word - Daystate-SSL.doc text version

Single Shot Loader .177 and .22 cal. Daystate MK4, Huntsman , Air Wolf, Air Ranger Thank you for your purchase. Please read these fitting instructions before using the loader. Your kit should contain ­ 1 off SSL 1 off 1.5mm short allen key Safety first. Observe safe practices when handling your rifle and follow the manufacturer's safety instructions when doing so. Take extra care when working on your rifle. Ensure that the rifle is switched OFF and the safety catch is set to safe and is absolutely not loaded with pellets. 1. Cock the rifle and slide the loader on to the action from either the left or right side of the rifle depending on your preference. This is done in a similar manner as fitting the Daystate multi-shot magazine. 2. Cocking the action will flip out the loader arm.

3. A M3 grub screw located in the side wall of the loader. This can be optionally very gently tightened to locate the loader semi-permanently in position. Access the grub screw from the central slot in the loader body. The arrowed position is for left side fitting. Swap the grub screw in to the threaded hole on the other side of the loader for right fitting.

The loader is now ready for use.

www.rowanengineering.com

Information

Microsoft Word - Daystate-SSL.doc

1 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

253609


You might also be interested in

BETA
Shop Survey
Anschutz 2002_11/01Manual
Microsoft Word - Daystate-SSL.doc
feb_06_No_Prices.qxp
159434-1 3-01-12.indd