Read M-600.pdf text version

NOTICE

This document, the property of, prepared and issued by the architect, is submitted for the specific project namely and the recipient by accepting this document assumes custody and agrees that this document will not be copied or reproduced in part or in whole, and any special features peculiar to this design shall not be incorporated in any other project, unless prior agreement has been obtained in writing. These documents will be returned immediately upon completion of the project or upon the request of the architect. This document is the exclusive property of the architect, no rights to ownership are transferable, or shall be lost by the filing of this document with any and all public authorities for the purpose of compliance with Codes and or Ordinances, i.e. Building Permit, etc.

AIR HANDLING UNITS

SUPPLY FAN TAG AHU-A AHU-B REMARKS: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 AREA SERVED BLDG A BLDG B & BRIDGE VENTILATION LOCATION OA CFM Roof Roof 3,500 4,000 CFM 25,000 21,000 ESP STYLE 3.0 3.0 BI BI HP RETURN/EXHAUST FAN CFM ESP 2.0 2.0 Style BI BI HP 20 15 FILTER EFFICIENCY MERV-A 8/MERV-A 13 MERV-A 8/MERV-A 13 NOMINAL CAPACITY (TONS) 75 60 DX COOLING COIL BANK EAT TOTAL SENS MBH 820 634 MBH 563 441 DB/WB 77/65.2 77/65.2 LAT DB/WB 53 Sat'd 53 Sat'd MBH 618 570 STEAM COIL BANK EAT LAT PRESSURE DB 39 33 DB 55 55 PSIG 10 10 649 598 ELECTRIC LBS/HR MCA 238 181 VOLTS/ PHASE 480/3 PH 480/3 PH REPRESENTATIVE MANUFACTURER TRANE TRANE MODEL SSHLF754 SSHLF604 REMARKS 1 - 15 1 - 15 TAG GV-1A GV-1B

ROOFTOP MOUNTED- GRAVITY VENTILATOR

LOCATION BLDG. A-ROOF BLDG. B-ROOF SERVICE ATTIC VENT ATTIC VENT CFM 187 187 MANUFACTURER COOK COOK MODEL PR PR SIZE 8 8 REMARKS 1,2 1,2

50 25,000 40 21,000

NOTES PROVIDE CURB FOR ROOF MOUNT 1 ALUMINUM HOUSING 2

OR APPROVED EQUIVALENT MANUFACTURER AND MODEL PROVIDE VFD FOR SUPPLY AND RETURN FANS. PROVIDE SEALED AND GASKETED ACCESS DOORS FOR COIL, FILTER AND FAN SECTIONS. SUPPLY WITH OPPOSED BLADE DAMPER SECTIONS FOR OUTSIDE, RELIEF, AND MIXED AIR. PROVIDE OUTSIDE AIR FLOW MEASUREMENT STATION. SUPPLY UNIT WITH 100% ENTHALPY BASED OUTSIDE AIR ECONOMIZER OPERATION. DOUBLE WALL UNITS. VARIABLE VOLUME UNIT OPERATION. PROVIDE WITH HOT GAS BYPASS PROVIDE WITH CRANKCASE HEATER PROVIDE UNIT MOUNTED DISCONNECT PROVIDE WITH DUCT CONNECTIONS THRU ROOF CURB REFRIGERANT TO BE R410A CONTROLS TO BE COMPATIBLE WITH BUILDING MANAGEMENT SYSTEM. PROVIDE VERTICAL STEAM COIL(S) DOWNSTREAM OF MIXING POINT

AIR CONDITIONING UNITS

SUPPLY FAN TAG SACU-1 SACC-1 SACU-2 SACC-2 SACU-3 SACC-3 DESIGNATION SPLIT SYSTEM AIR CONDITIONER SPLIT SYSTEM AIR COOLED CONDENSING UNIT SPLIT SYSTEM AIR CONDITIONER SPLIT SYSTEM AIR COOLED CONDENSING UNIT SPLIT SYSTEM AIR CONDITIONER SPLIT SYSTEM AIR COOLED CONDENSING UNIT LOCATION/SERVICE ELEVATOR MACH RM / MACH RM BRIDGE ROOF / SACU-1 BLDG. A, RM. 121A / PANTRY SOUTH BLDG. A, RM. 121A / SACU-2 BLDG. A, RM. 131A / PANTRY NORTH BLDG. A, RM. 131A / SACU-3 CFM 320 - 425 N/A 1,750 N/A 1,750 N/A ESP HP N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A DX COOLING COIL EAT LAT TOTAL MBH 12 12 4.8 4.8 4.8 4.8 DB/WB 80/68 95/75 80/67 80/67 DB/WB 55/54 N/A 60/58 60/58 HEATING CAPACITY EAT LAT TOTAL MBH N/A N/A 100 N/A 100 N/A DB N/A N/A 47 N/A 47 N/A DB N/A N/A 94 N/A 94 N/A ELECTRIC MCA 1 13 12.4 27.0 12.4 27.0 VOLTS/ PHASE 208/230/1 208/230/1 115/1/60 208/1/60 115/1/60 208/1/60 OPERATING WEIGHT 40 90 250 250 250 250 REPRESENTATIVE MANUFACTURER MITSUBISHI MITSUBISHI TRANE TRANE TRANE TRANE MODEL PKA SERIES PUY SERIES TUX1C100 4TTR3048 TUX1C100 4TTR3048 REMARKS 3,6,8,10,11,12 1,2,4,5,6,7,12 3,6,12,13,14 12 3,6,12,13,14 12 TYPE AS-1 ET-1 BFW-1 CRT-1 BDS-1 DESCRIPTION TANGENTIAL AIR SEPARATOR VERTICAL EXPANSION TANK BOILER FEEDWATER RECEIVER CONDENSATE RECEIVER TANK BLOWDOWN SEPARATOR 200 GPM N/A 18 GPM 18 GPM N/A

SEPARATORS AND TANKS

CAPACIT ACCEPTANCE DIAMETE Y GAL R INCHES 13 80 117 45 N/A 16 24 N/A N/A 20 LENGT DISCHARGE H PRESSURE INCHES 27 N/A 51 N/A N/A 30 PSIG N/A 20 PSIG 22 N/A PUMP HP N/A N/A 1/2 1/3 N/A REPRESENTATIVE MANUFACTURER & MODEL ITT BELL & GOSSETT ITT BELL & GOSSETT SARCO GB3D1171 SARCO GS2D451 CLEAVER BROOKS A20 REMARKS 1,2 1 1, 3 - 7 1,3,5,6,8 9,10

CHURCH OF THE HOLY FAMILY SENIOR APARTMENTS

REMARKS: 1 2 3 4 5 6 7 8 9 10 11 12 13 14

PROVIDE WITH LOW AMBIENT KIT PROVIDE WTH CURB(S) FOR ROOF MOUNTING SUPPLY WITH FILTER SECTION AND 35% FILTERS PROVIDE WITH CRANKCASE HEATER PROVIDE UNIT MOUNTED DISCONNECT REFRIGERANT TO BE R410A PROVIDE WIND BAFFLE PROVIDE CONDENSATE PUMP PROVIDE WITH DC INVERTER TYPE COMPRESSOR EVAPORATOR TO BE WALL MOUNTED UNIT PROVIDE UNIT CONTROLS WITH REMOTE T-STAT OR APPROVED EQUIVALENT MANUFACTURER AND MODEL MANUFACTURER SUPPLIED SET BACK THERMOSTAT NATURAL GAS SERVICE TAG DESIGNATION STEAM BOILER STEAM BOILER LOCATION BOILER ROOM BOILER ROOM

REMARKS: OR APPROVED EQUIVALENT MANUFACTURER AND MODEL 1 2 4" FLANGED CONNECTIONS 3 DUPLEX UNIT 4 PROVIDE INTERFACE TO BOILER CONTROLS 5 WELDED STEEL RECEIVER 115V, 1 PHASE POWER 6 7 PROVIDE WATER LEVEL GAUGE GLASS & FLOAT OPERATED MAKEUP VALVE 8 PROVIDE WITH PUMP ALTERNATOR CONTROL MECHANISM 9 PROVIDE WITH DRAIN AFTERCOOLER 10 PROVIDE WITH WELDED ANGLE LEGS

920 TIFFT ST. BUFFALO, NY 14220

REVISIONS:

LP STEAM BOILERS

SERVICE REHEAT & DOMESTIC HW REHEAT & DOMESTIC HW OUTPUT(MBH) 2027 2027 GAS INPUT(MBH) 2365 2365 STEAM PRESSURE STEAM OUTPUT (PSIG) (PPH) 12 12 2070 2070 SHIPPING WGT (LBS) 5200 5200 MANUFACTURER CLEAVER BROOKS CLEAVER BROOKS MODEL NO. CFH-60 CFH-60 REMARKS 1-6 1-6 B-1 B-2 CONTROLS 24V DC 24V DC 24V DC 24V DC NOTES 1,2 1,2 1,2 1,2 REMARKS: 1 2 3 4 5 6

VARIABLE AIR VOLUME BOX SCHEDULE W/ HYDRONIC REHEAT COIL (VAVR)

PLAN CODE VAVR-5 VAVR-6 VAVR-8 VAVR-10 NOTES 1 2 INLET DIA. (IN.) 5 6 8 10 MAXIMUM AIR FLOW COOLING (CFM) 350 500 900 1400 REPRESENTATIVE MANUFACTURER TITUS TITUS TITUS TITUS MODEL DESV DESV DESV DESV 1 1 1 1 WATER REHEAT COIL ROWS/COILS MAX GPM 1.0 1.0 2.0 2.0 HEADLOSS

PROVIDE 1" DUAL DENSITY INSULATION INTERNALLY (INCLUDING END CAPS) TO COMPLY WITH NFPA 90A & UL 181. OR APPROVED EQUIVALENT MANUFACTURER AND MODEL

PROVIDE GAS TRAIN FOR NATURAL GAS SERVICE PROVIDE INTEGRATED BOILER CONTROLS INCLUDING HI-LIMIT PRESSURE CONTROL, LOW WATER CUTOFF AND LEAD LAG CONTROLS FOR (2) BOILERS. PROVIDE PRESSURE RELIEF VALVES, PRESSURE/TEMPERATURE GAUGES, AND WATER LEVEL GAUGE BOILERS TO HAVE A MINIMUM AFUE RATING OF 85% BOILERS TO BE DIRECT VENT WITH SEALED COMBUSTION OR APPROVED EQUIVALENT MANUFACTURER AND MODEL

SA PROJECT TEAM:

SR. ARCH. DRAWN BY

PRINCIPAL P.Silvestri JR. ARCH. CHECKED BY

SEAL:

SHELL AND TUBE STEAM/HOT WATER HEAT EXCHANGERS

TUBE TAG HX-1 HX-2 DESIGNATION REHEAT WATER HEAT EXCHANGER DOMESTIC HOT WATER HEAT EXCHANGER LOCATION EQUIP ROOM EQUIP ROOM SERVICE HW DHW GPM EWT LWT 200 50 170 40 180 120 WPD SHELL STEAM PRESSURE #STEAM/HR (PSIG) 1000 1820 10 10 REPRESENTATIVE MANUFACTURER BELL & GOSSETT ARMSTRONG FLORITE MODEL QSU-103-2 665-DW-P-P-P-TW-DMC1-2 REMARKS 1 1-7 TAG FTR-1 DESCRIPTION FIN TUBE RADIATOR

HOT WATER FIN TUBE RADIATORS

LOCATION PER PLAN OUTPUT (BTUH/FT) 250 ENCLOSURE HGT (INCHES) 14 MTG HGT (INCHES) 4 MANUFACTURER VULCAN MODEL LINOVECTOR II REMARKS 1-4

12/11/09

1. HOT WATER SUPPLY TEMPERATURE TO BE 180F 2. PROVIDE WALL MOUNTED UNITS WITH SLOPED TOPS PER ARCHITECT'S SELECTION 3. PROVIDE CABINET MOUNTED HOT WATER CONTROL VALVE AND THERMOSTAT 4. OR APPROVED EQUIVALENT MANUFACTURER AND MODEL

TITLE:

REMARKS: 1 OR APPROVED EQUIVALENT MANUFACTURER AND MODEL 2 PRE-PIPED PACKAGE WITH AUTOMATIC TEMPERATURE CONTROLS & HOT WATER RECIRCULATION CONNECTION AND PUMP 3 PROVIDE DIGITAL TEMPERED WATER MIX VALVE 4 PROVIDE DATA CONNECTION FOR INTERFACE WITH THE BUILDING MANAGEMENT SYSYTEM 5 PROVIDE SAFETY CONTROLS TO ELIMINATE POTENTIAL FOR SCALDING WATER TEMPERATURE 6 HOT WATER SYSTEM TO BE CONTROLLABLE TO 115F +/- 2F 7 PROVIDE AUTOMATIC SHUTOFF OF HOT WATER FLOW IN THE EVENT OF A POWER FAILURE OR LOSS OF COLD WATER PRESSURE. TAG CUH-1 CUH-2 CUH-3 CUH-4

HOT WATER UNIT HEATERS

DESCRIPTION CABINET UNIT HEATER CABINET UNIT HEATER CABINET UNIT HEATER CABINET UNIT HEATER LOCATION BLDG. A, EAST STAIRS BLDG.A, WEST STAIRS BLDG. A/B, LOBBY BLDG. B, NORTH STAIRS CFM 1060/845 1060/845 230/185 230/185 OUTPUT (MBH) 60.4 60.4 12.8 12.8 GPM 4 4 0.5 0.5 ELEC 115/1/60 115/1/60 115/1/60 115/1/60 FAN HP 1/10 1/10 1/15 1/15 # OF FANS 2 2 1 1 MANUFACTURER VULCAN VULCAN VULCAN VULCAN MODEL FS - 10 FS - 10 FS - 02 FS - 02 REMARKS 1-5 1-5 1-5 1-5

PUMP SCHEDULE

TAG HWP-1 HWP-2 LOCATION EQUIP ROOM EQUIP ROOM SERVICE HOT WATER REHEAT HOT WATER REHEAT TYPE INLINE INLINE GPM 200 200 P.D.FT 60 60 ELECTRICAL 460/60/3 460/60/3 H.P. 7.5 7.5 RPM 1750 1750 REP. MANUFACTURER & MODEL NO. BELL & GOSSETT SERIES 80 BELL & GOSSETT SERIES 80 Notes 1-3 1-3

NOTES 1 2 3

PROVIDE WITH TRIPLE DUTY VALVES AND SUCTION DIFFUSERS PROVIDE WITH VFD DRIVES OR APPROVED EQUIVALENT MANUFACTURER AND MODEL TAG EF-1A EF-1B EF-1AB EF-2AB EF-3AB EF-4AB EF-2A EF-2B EF-3A EF-4A NOTES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1. HOT WATER SUPPLY TEMPERATURE TO BE 180F 2. PROVIDE TWO SPEED FANS 3. PROVIDE FLOOR MOUNTED UNITS WITH SLOPED TOPS 4. PROVIDE CABINET MOUNTED HOT WATER CONTROL VALVE AND REMOTE THERMOSTAT 5. OR APPROVED EQUIVALENT MANUFACTURER AND MODEL

FAN SCHEDULE REGISTER, GRILLE & DIFFUSER SCHEDULE

TYPE 1 2 3 4 A B C LOCATION BLDG. A & B BLDG. A & B BLDG. A & B BLDG. A & B BLDG. A & B BLDG. A & B BLDG. B MOUNTING TYPE SURFACE SURFACE LAY-IN SURFACE SURFACE LAY-IN SURFACE MODULE SIZE USE SIZE VOLUME (CFM) (DIAMETER) PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG PER DWG MANUFACTURER & MODEL NO. TITUS TMSA TITUS TMSA TITUS TMSA TITUS 272RL TITUS 350RL TITUS 350RL TITUS CT-PP-0 REMARKS 1-3 1-3 1-3 1 - 4, 9 1-5 1-5 1,3, 5 - 8 12" X 12" SUPPLY 24" X 24" SUPPLY 24" X 24" SUPPLY N/A SUPPLY N/A RETURN N/A RETURN N/A FLOOR RETURN LOCATION BLDG. A - ROOF BLDG. B - ROOF BRIDGE - 1ST FL BRIDGE - 2ND FL BLDG. A - ELEC. RM BRIDGE - EQUIP. RM BLDG. A - ROOF BLDG. B - ROOF BLDG. A - 1ST FL BLDG. A - 1ST FL SERVICE TOILET EXHAUST TOILET EXHAUST GENERAL EXHAUST TOILET EXHAUST 1ST FL ELEC. RM EXHAUST 1ST FL EQUIP. RM EXHAUST ATTIC EXHAUST ATTIC EXHAUST TOILET EXHAUST TOILET EXHAUST CFM 1,500 1,650 170 80 400 400 187 187 80 80 SP 2.5 2.5 1.0 1.0 1.0 0.125 0.125 0.125 1.0 1.0 DRIVE BELT BELT BELT N/A BELT DIRECT DIRECT DIRECT N/A N/A TYPE ROOF EXHAUSTER ROOF EXHAUSTER WALL EXHAUSTER CEILING FAN IN-LINE CENTRIFUGAL WALL MOUNTED ROOF EXHAUSTER ROOF EXHAUSTER CEILING FAN CEILING FAN RPM 1942 1761 1500 N/A 2850 1550 1670 1670 N/A N/A MOTOR HP 1.5 1.5 160W N/A 0.5 1/50 1/20 1/20 N/A N/A STARTER LINE LINE LINE LINE LINE LINE LINE LINE LINE LINE MANUFACTURER COOK COOK COOK NUTONE COOK GREENHECK COOK COOK NUTONE NUTONE MODEL 180RX8B 195RX8B GN184 QTXEN080 70SQN-B SE1-10-424-D ACED70C15DM ACED70C15DM QTXEN080 QTXEN080 REMARKS 1-3, 5,6,8-12 1-3, 5,6,8-12 2,4,6,16 2,4,6,16 1,2,4,6,8,11,12,16 4,6,8,13,14,15 2,4-8,10-12,14 2,4-8,10-12,14 2,4,6,16 2,4,6,16

REMARKS: 1. PROVIDE WITH OPPOSED BLADE DAMPER 2. STEEL CONSTRUCTION, WHITE FINISH 3. OR APPROVED EQUIVALENT MANUFACTURER AND MODEL 4. 35 DEGREE DEFLECTION, 3/4" SPACING 5. BLADES PARALLEL TO LONG DIMENSION 6. ALUMINUM CONSTRUCTION, WHITE FINISH 7. '7/32" SPACING, O DEGREE DEFLECTION 8. PROVIDE WITH HEAVY HEAVY DUTY MOUNTING FRAME FOR FLOORS 9. DOUBLE DEFLECTION, FRONT BLADE PARALLEL TO LONG DIMENSION

PROVIDE WITH OSHA APPROVED BELT GUARD PROVIDE WITH GRAVITY OPERATED BACKDRAFT DAMPER AT DISCHARGE POINT MOTORS TO BE WIRED FOR 208V, 3 PH, 60 HZ MOTOR TO BE WIRED FOR 120V, 1 PH, 60 HZ PROVIDE CURB WITH DAMPER TRAY FOR ROOF MOUNT OR APPROVED EQUIVALENT MANUFACTURER AND MODEL PROVIDE CURB CAP AND INLET BOX PROVIDE FAN DISCONNECT ADJUSTABLE PITCH DRIVE ALUMINUM HOUSING EXTENDED LUBE LINES PROVIDE STARTER WITH UNIT WALL HOUSING MOUNTING WITH GRAVITY OPERATED BACKDRAFT DAMPER, GAURDS & DISCHARGE WEATHER HOOD THERMOSTATIC CONTROL PROVIDE WITH WEATHER HOOD AT BUILDING WALL DISCHARGE POINT PROVIDE DISCHARGE WEATHER HOOD

SA JOB #:

04312

DATE:

12-11-09

DRAWING #:

Information

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

450083


You might also be interested in

BETA
Microsoft Word - 15684 Centrifugal Water Chillers.doc
TN-276-reply to queries.xls
Report of Marine Survey
MaxE Centrifugal Chiller (Design Level F) Engineering Guide - 160.73-EG1 (606)
H2O Floorplan 200111.indd