Read aromaticsolvents_shellsola150_americas.pdf text version

Data Sheet

Product Name Product Code Product Category CAS Registry Number Description

Issued: 23-Jun-2005

SHELLSOL A150

Q7493 North America

Aromatics

64742-94-5 Mixture of C 9-11 hydrocarbons with >99% aromatic content which confers good solvency. The Hazardous Air Pollutants content is low, and it has very low sulfur content. This high boiling solvent is slow evaporating and has a high flash point. Property

Appearance Color Specific Gravity @15.6°C Copper Corrosion 30min @100°C Distillation, IBP Distillation, 50%v Distillation, DP Aromatics Flash Point, TCC Aniline Point, Mixed Kauri-Butanol Value

(1) Guaranteed

Sales Specification

Unit

Min

Clear

Max

Method

ASTM D4176 ASTM D156

Saybolt

28 0.880 0.910 1

ASTM D4052 ASTM D130 ASTM D86

°C °C °C % v/v °C °C

176.7 196.1 215.6 98 62.8 18.3 90

ASTM D86 ASTM D86 ASTM D1319 (1) ASTM D56 ASTM D611 ASTM D1133

Product meets the requirements of ASTM D3734 Standard Specification for High Flash Aromatic Naphtas, Type II. Conformance to specification limits is determined in accordance with ASTM E29, Rounding-off Method.

Typical Properties

Property

Color API Gravity Density @15°C Density @15.6°C Specific Gravity @15.6/15.6°C Distillation, IBP Distillation, 50%v Distillation, DP Evaporation Time (nBuAc=470sec) Relative Evaporation Rate (nBuAc=1) Aromatics Flash Point Auto Ignition Temperature Aniline Point (M=Mixed) Kauri-Butanol Value Hildebrand Solubility Parameter Hydrogen Bonding Index Fractional Polarity Viscosity @25°C Molecular Weight

Unit

Saybolt kg/L lb/gal °C °C °C seconds %v/v °C °C °C (cal/cm³)^½ mm²/s g/mol

Method

ASTM D156 ASTM D4052 ASTM D4052 ASTM D4052 ASTM D4052 ASTM D130 ASTM D86 ASTM D86 ASTM D86 ASTM D3539 ASTM D3539 ASTM D1319 ASTM D56 ASTM E659 ASTM D611 ASTM D1133 ASTM D445 -

Value

+30 26.5 0.895 7.47 0.895 1 184 189 200 6000 0.08 > 99 65 480 14M 94 8.7 5.3 0.001 1.25 130

Copper Corrosion (30min @100°C) -

Test Methods

Copies of copyrighted test methods can be obtained from the issuing organisations: American Society for Testing and Materials (ASTM) : www.astm.org Energy Institute (IP) : www.energyinst.org.uk Deutsches Institut für Normung (DIN) : www.din.de Shell Method Series (SMS) methods are issued by Shell International Chemicals B.V., Shell Research and Technology Centre, Amsterdam, The Netherlands. Copies of SMS can be obtained through your local Shell Chemicals company. For routine quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through your local Shell Chemicals company.

Storage and Handling

Provided proper storage and handling precautions are taken we would expect SHELLSOL A150 to be technically stable for at least 12 months. For detailed advice on Storage and Handling please refer to the Material Safety Data Sheet on www.shell.com/chemicals. For detailed Hazard Information please refer to the Material Safety Data Sheet on www.shell.com/chemicals.

Hazard Information

Contact

For further information, please visit our website at www.shell.com/chemicals, contact your local Shell representative, or call the 'Shell Chemicals' order center at 1 866 89 SHELL (1 866 897 4355). All products purchased or supplied by Shell are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of lading. Shell warrants that its product will meet those specifications designated as such herein or in other publications. All other information including that herein, supplied by Shell is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the products suitability for a particular purpose. Shell makes no other warranty either expressed or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from use thereof; that any products shall be merchantable or fit for any purpose; or that the use of such other information or product will not infringe any patent. The expression `Shell Chemicals' refers to the companies of the Royal Dutch/Shell Group which are engaged in chemical businesses. Each of the companies which make up the Royal Dutch/Shell Group of companies is an independent entity and has its own separate identity.

Warranty

Trademark

SHELLSOL is a Shell Trademark.

Information

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

164706