Read untitled text version

Tempil Vendor Code: TEM

Tempilstik°

How to Use When working below 700°F (371°C) on relatively rough surfaces, where prolonged heating is not required, the simplest method is to mark the workpiece before heating begins. The dry opaque Tempilstik° mark will change to a distinct melted mark; this phase change will occur when the temperature rating of the selected Tempilstik° has been reached. CAUTION - Disregard any color change that may occur during heating. This has no significance. It is only the melting of the Tempilstik° mark that indicates when the rated temperature has been reached. At temperatures above 700°F (371°C) or under prolonged heating, the Tempilstik° mark may evaporate or be absorbed. Under these conditions, stroke the workpiece with the selected Tempilstik° from time to time during the heating operation. When the rated temperature has been reached, it will leave a liquid smear. This method should also be used if a smooth surface is involved, where the hard Tempilstik° chalk will not leave a mark. (If it is necessary to mark a smooth surface before heating, use Tempilaq°.) Cleaning For temperature ratings of 650°F (343°C) or below, the Tempilstik° mark can be removed (if it has not been charred) with alcohol or water; for ratings above 650°F (343°C), use water only. If the mark has been heated well above the rated temperature and has become charred, an abrasive procedure may be required.

Tempilstik°

Tempil's industrial melting point standards are simple, reliable and guaranteed accurate within 1%. Tempilstik° technology was developed to meet the demand for measuring surface temperatures during preheat, interpass and postweld heat treatment temperatures. When the Tempilstik° mark melts...the temperature has been reached. Nothing could be simpler. Over 100 temperature ratings available between 100°F (38°C) and 2500°F (1371°C). Lot numbered for NIST traceability in accordance with ISO 10012-1. Applications A few of the hundreds of uses for Tempilstik° temperature indicators include: Determining surface temperatures during welding and metal fabrication including preheat, interpass, postweld heat treatment, annealing and stress relieving. Determining operating temperatures of bearings, transformers, steam traps, molds, PC board preheaters, motors, electronic components, hydraulic systems, commercial irons, hot plates & heat exchangers.

Part Number System

TempilStik° Fahrenheit Part No. TS and Degree TempilStik° Celsius Part No. TSC and Degree TempilStik° Blister packs Part No. TSB and Degree

Standard Packaging

Tempilstik° temperature Indicators are 5" long and come in adjustable aluminum holders with pocket clip. 10 indicators per box. Bar-coded per NWSA guidelines. Approximate weight per box of 10: 1/2 lb.

Fahrenheit Ratings

°F 100 103 106 109 113 119 125 131 138 144 150 156 163 169 175 182 188 194 200 206 213 219 225 231 238 244 250 °C 38 39 41 43 45 48 52 55 59 62 66 69 73 76 79 83 87 90 93 97 101 104 107 111 114 118 121 °F 256 263 269 275 282 288 294 300 306 313 319 325 331 338 344 350 363 375 388 400 413 425 438 450 463 475 488 °C 124 128 132 135 139 142 146 149 152 156 159 163 166 170 173 177 184 191 198 204 212 218 226 232 239 246 253 °F 500 525 550 575 600 650 700 750 800 850 900 932 950 977 1000 1022 1050 1100 1150 1200 1250 1300 1350 1400 1425 1450 1480 °C 260 274 288 302 316 343 371 399 427 454 482 500 510 525 538 550 566 593 621 649 677 704 732 760 774 788 804 °F 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 2400 2450 2500 °C 816 843 871 899 927 954 982 1010 1038 1066 1093 1121 1149 1177 1204 1232 1260 1288 1316 1343 1371

Celsius Ratings

°C 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 °F 104 113 122 131 140 149 158 167 176 185 194 203 212 221 230 239 248 257 266 275 284 293 °C 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 260 °F 302 311 320 329 338 347 356 365 374 383 392 401 410 419 428 437 446 455 464 473 482 500 °C 270 280 290 300 310 320 340 350 370 380 390 400 420 460 475 500 520 530 560 600 625 650 °F 518 536 554 572 590 608 644 662 698 716 734 752 788 860 887 932 968 986 1040 1112 1157 1202 °C 680 700 740 760 775 800 825 850 875 900 910 950 1010 1075 1100 1125 1150 1175 1200 °F 1256 1292 1364 1400 1427 1472 1517 1562 1607 1652 1670 1742 1850 1967 2012 2057 2102 2147 2192

Page 505

Tempil Vendor Code: TEM

Tempilabel° Tempilabel° Temperature Monitors

· Self-adhesive temperature indicating labels. · Each label consists of heat sensitive indicator(s) sealed under transparent window(s). · As the rated temperature(s) are reached, the indicator(s) color change from light gray to black. · Color change is one-way; irreversible · Temperatures from 100°F to 500°F (38°C to 260°C) are available. · Shapes, sizes and types available are numerous and can satisfy a wide range of application requirements. Benefits: Inexpensive - alternative for temperature measurement SImple - easy to apply self-adhesive label; no gauges or electronics Accurate - within ±2% rated temperature or better Guaranteed - accuracy certification is available Reliable - monitor surface temperature continuously Calibration - Tempilabels are always in calibration Permanent Record - easily removed after use providing documentation for warranty claims and inspection or quality control reports Traceable - production lot numbered

Series 4 Tempilabel°

4 temperature ratings per label Label size: 1-3/4" W x 7/8" H Each indicating window is 5/32" Available in packs of 10 or rolls of 500 (4 rolls min.) Part No. TLL4A100 TLL4A120 TLL4A130 TLL4A150 TLL4A170 TLL4A190 TLL4A200 TLL4A220 TLL4A230 TLL4A250 TLL4A270 TLL4A290 TLL4A300 TLL4A320 TLL4A330 TLL4A350 TLL4A370 °F 100° 120° 130° 150° 170° 190° 200° 220° 230° 250° 270° 290° 300° 320° 330° 350° 370° °C 38° 49° 54° 66° 77° 88° 93° 104° 110° 121° 132° 143° 149° 160° 166° 177° 188° °F 110° 130° 140° 160° 180° 200° 210° 230° 240° 260° 280° 300° 310° 330° 340° 360° 380° °C 43° 54° 60° 71° 82° 93° 99° 110° 116° 127° 138° 149° 154° 166° 171° 182° 193° °F 120° 140° 150° 170° 190° 210° 220° 240° 250° 270° 290° 310° 320° 340° 350° 370° 390° °C 49° 60° 66° 77° 88° 99° 104° 116° 121° 132° 143° 154° 160° 171° 177° 188° 199° °F 130° 150° 160° 180° 200° 220° 230° 250° 260° 280° 300° 320° 330° 350° 360° 380° 400° °C 54° 66° 71° 82° 93° 104° 110° 121° 127° 138° 149° 160° 166° 177° 182° 193° 204° Part No. TLL4B100 TLL4B125 TLL4B150 TLL4B175 TLL4B200 TLL4B225 TLL4B300 TLL4B350 TLL4B400 TLL4C100 TLL4C200 TLL4C300 TLL4C350 TLL4C450 °F 100° 125° 150° 175° 200° 225° 300° 350° 400° 100° 200° 300° 350° 450° °C 38° 52° 66° 79° 93° 107° 149° 177° 204° 38° 93° 149° 177° 232° °F 125° 150° 175° 200° 225° 250° 325° 375° 425° 150° 250° 350° 400° 500° °C 52° 66° 79° 93° 107° 121° 163° 191° 218° 66° 121° 177° 204° 260° °F 150° 175° 200° 225° 250° 275° 350° 400° 450° 200° 300° 400° 450° 550° °C 66° 79° 93° 107° 121° 135° 177° 204° 232° 93° 149° 204° 232° 288° °F 175° 200° 225° 250° 275° 300° 375° 425° 475° 250° 350° 450° 500° 600° °C 79° 93° 107° 121° 135° 149° 191° 218° 246° 121° 177° 232° 260° 316°

4A - 10° F between each rating 4B - 25° F between each rating 4C - 50° F between each rating

Series 6M

6 temperature ratings per label Label size: 1-3/8" W x 3/8" H Part No. TLL6MA100 TLL6MA130 TLL6MA160 TLL6MA190 TLL6MA220 TLL6MA250 TLL6MB100 TLL6MB175 °F 100° 130° 160° 190° 220° 250° 100° 175° °C 38° 54° 71° 88° 104° 121° 38° 79° Each indicating window is 1/16" W x 1/8" H Available in packs of 10 or rolls of 500 (4 rolls min.) °F 110° 140° 170° 200° 230° 260° 125° 200° °C 43° 60° 77° 93° 110° 127° 52° 93° °F 120° 150° 180° 210° 240° 270° 150° 225° °C 49° 66° 82° 99° 116° 132° 66° 107° °F 130° 160° 190° 220° 250° 280° 175° 250° °C 54° 71° 88° 104° 121° 138° 79° 171° °F 140° 170° 200° 230° 260° 290° 200° 275° °C 60° 77° 93° 110° 127° 143° 93° 135° °F 150° 180° 210° 240° 270° 300° 225° 300° °C 66° 82° 99° 116° 132° 149° 107° 149°

6MA - 10° F between each rating 6MB - 25° F between each rating

Series 8M

8 temperature ratings per label Label size: 1-3/4" W x 3/8" H Part No. TLL8MA100 TLL8MA140 TLL8MA180 TLL8MA230 TLL8MB100 °F 100° 140° 180° 230° 100° °C 38° 60° 82° 110° 38° Each indicating window is 1/16" W x 1/8" H Available in packs of 10 or rolls of 500 (4 rolls min.) °F 110° 150° 190° 240° 125° °C 43° 66° 88° 116° 52° °F 120° 160° 200° 250° 150° °C 49° 71° 93° 121° 66° °F 130° 170° 210° 260° 175° °C 54° 77° 99° 127° 79° °F 140° 180° 220° 270° 200° °C 60° 82° 104° 132° 93° °F °C 150° 66° 190° 88° 230° 110° 280° 138° 225° 107° °F °C 160° 71° 200° 93° 240° 116° 290° 143° 250° 121° °F °C 170° 77° 210° 99° 250° 121° 300° 149° 275° 135°

8MA - 10° F between each rating

8MB - 25° F between each rating

Page 506

Tempil Vendor Code: TEM

Test Kits / Paintpens Button Series

4 temperature ratings per label Temperatures are read clockwise from the arrow Label Size: 1/4" dia. Each indicating window is 3/64" dia. Part No. TLLBU100 TLLBU120 TLLBU140 TLLBU160 TLLBU175 TLLBU225 °F 100° 120° 140° 160° 175° 225° °C 38° 49° 60° 71° 79° 107° °F 110° 130° 150° 170° 200° 250° °C 43° 54° 66° 77° 93° 121° °F 120° 140° 160° 180° 225° 275° °C 49° 60° 71° 82° 107° 135° °F 130° 150° 170° 190° 250° 300° °C 54° 66° 77° 88° 121° 149°

Bulls-Eye Series

1 temperature ratings per label Label Size: 5/16" dia. Each indicating window is 1/8" Available in packs of 10 or rolls of 500 (4 roll min) Part No. TLLBE105 TLLBE110 TLLBE115 TLLBE120 TLLBE130 TLLBE140 TLLBE150 TLLBE160 TLLBE170 TLLBE180 TLLBE190 TLLBE200 TLLBE210 TLLBE220 TLLBE240 TLLBE250 °F 105° 110° 115° 120° 130° 140° 150° 160° 170° 180° 190° 200° 210° 220° 240° 250° °C 40° 43° 46° 49° 54° 60° 66° 71° 77° 82° 88° 93° 99° 104° 116° 121° Part No. TLLBE260 TLLBE270 TLLBE280 TLLBE290 TLLBE300 TLLBE310 TLLBE320 TLLBE330 TLLBE410 TLLBE420 TLLBE435 TLLBE450 TLLBE465 TLLBE480 TLLBE490 TLLBE500 °F 260° 270° 280° 290° 300° 310° 320° 330° 340° 350° 360° 370° 380° 390° 400° 410° °C 127° 132° 138° 143° 149° 154° 160° 166° 171° 177° 182° 188° 193° 199° 204° 210°

Tempstik° Test Kit

Tempstik° Test Kit consists of twenty 2-1/2" temperature indicating crayons, each with its own holder, with ratings from 125°F/52°C to 800°F/427°C. For welders who frequently weld different types of heat treated alloy steels in various thicknesses, Part No. TSTK and need to know precise preheat and interpass temperatures.

Temprobe° Temperature Test Kit

Temprobe° Temperature Test Kits consist of twenty 3/4" temperature indicating crayons with ratings from 125°F/52°C to 600°F/316C, and a special holder. They are intended for use by researchers, experimenters, technicians and people Part No. TTTK who do other heat-related operations.

Tempil PaintpenTM

Tempil PaintpenTM is a new valve action felt tip marker. PaintpenTM waterborne acrylic paint formulations are in compliance with CONEG regulations, Clean Air Act, SARA legislation and California VOC regulations. Contains NO solvents and NO ODC's. Tip is washable, can't dry out.

· ·

Tempilstik° Welding Code Kit:

Includes welding code requirements, preheat and interpass temperature specifications and certified chemical analysis to MIL-SPEC. Also included are 10 temperature indicators spaced between 125°F (52°C) and 450°F (232°C). They include all preheat melting point temperatures needed to meet requirements of Part No. TWCK AWS D1.1 Structural Welding Code for Steel; ASME Code, Section 1, Power Boilers; Section lll, Nuclear Components; and Section Vlll, Unfired Pressure Vessels; ANSI/ ASME Code B31.1, Power Piping; and B31.3, Chemical Plant and Petroleum Refinery Piping.

· ·

Simply shake well; gently depress tip until saturated with paint. There is no ball point to freeze. Permanently marks metals, plastic, wood, cardboard, glass, and most other surfaces - even wet or oily. It is non-hazardous, non-flammable and environmentally safe. It is waterproof and quick drying. Available in 4 bright lead-free colors (black, red, white, yellow). 12 markers per box/144 per case. Part No. TPPBLK TPPRED TPPWHT TPPYEL Description Paintpen Black Paintpen Red Paintpen White Paintpen Yellow

Page 507

Tempil Vendor Code: TEM

Pyromarker / Bloxide Pyromark° Paints

Pyromark° High Temperature Paints are specially formulated for protecting, decorating or color identifying metal surfaces that will be subjected to high temperatures. There are three systems of Pyromark° Protective Coatings, each classified by its maximum performance temperature. The maximum temperature rating varies by substrate from 2500°F on Inconel to 1200°F on mild steel. The silicone-base coatings provide long-lasting protection against oxidation and corrosion. Pryomark° coatings have excellent covering characteristics and will not blister, chip, crack or peel at their rated temperature. Pyromark° paints improve heat transfer in infrared heating applications due to their high emissivity properties. Series 800 - 9 colors available. Temperature range from 600°F to 800°F, depending on the specific color. Series 1200 - 4 colors - able to withstand 1200°F Series 2500 - 6 colors available, each able to withstand 2500°F after heat cure and vitrification procedures. The air dried finish on all colors is semi-gloss. This finish will become flat after heating. Black is also available flat. How to Use Surface must be clean, dry and between 60°F and 125°F, at the time of application. Mild Steel; sand blast to near white metal (SSPC-SP10). Stainless, aluminum, Inconel: steam clean or solvent clean to remove all soil, grease, and oil. See product technical data sheet for details. Apply by spray or brush. Heat curing of Series 2500 is necessary to obtain maximum thermal properties. Series 800 and Series 1200 will air dry.

Typical Applications Infrared space heaters, boilers, breechings, stoves, furnaces, steampipes, fireplaces, stacks, kilns or any other metal surfaces that are subjected to high temperature service. 2500 FBLK SBLK Ordering example: Pyromark Series 1200 Flat Black, 5 Gallon pail...PK12FBLK5GL

Color Code Black, Flat Black, Semi-Gloss Black, Satin Sheen Blue Gray Green Metallic, Aluminum Metallic, Charcoal Tan White Yellow

800 FBLK SBLK

1200 FBLK SBLK

BLU GRY GRN MAL

BLU

BLU GRN

CHM TAN WHT YEL WHT YEL

Bloxide°

Bloxide° is a weldable rust preventative that insures x-ray quality welds. The aluminized coating acts as an oxygen barrier that protects against rust. It also forms aluminum oxide in the weld puddle which reduces porosity and pinholing. The use of Bloxide° eliminates recleaning of sub assemblies prepared for welding even after they have been in outside storage for several months. It is an excellent weldable primer paint, and leaves no objectional residue or slag. Bloxide° is free of lead, sulfur, zinc, cadmium, mercury, chlorine or other halogens which makes it safe for the nuclear fabrication industry. It will also withstand temperatures up to 800°F.

How to Use Bloxide° can be applied by brush or spray. It requires no special training, equipment, or precautions for effective application. Bloxide° is quick drying, forming a tack-free, tenacious film in minutes. Coverage is approx. 800-1,000 sq. ft. per gallon. Typical Applications Bloxide° can be advantageously used on all steels, and is compatible with most welding processes. It should definitely be considered for x-ray quality work. TYPE APPROVED BY ABS - AMERICAN BUREAU OF SHIPPING and by DNV - DET NORSKE VERITAS FOR MARINE AND OFFSHORE FABRICATION APPLICATIONS.

Part No. BLAR BLGL BLQT BL5GL

Description Bloxide Bloxide Bloxide Bloxide

UM 13 oz. Aerosol 1 gal 1 qt 5 gal

Page 508

Tempil Vendor Code: TEM

Anti-Heat / Tempilaq Anti-Heat°

Anti-Heat° is a protective heat-sink compound that confines heat to the welding, brazing or soldering zone, protecting adjacent areas from undesirable heat build-up. It minimizes risk of heat damage, prevents discoloration, warping, buckling or other distortion of light-gauge metals. How to Use Anti-Heat° is easy to apply. Simply spread it on right from the can. Tube will fit standard caulking gun. It is harmless to the skin, odorless, non-toxic and will not stain the base metal. To clean, just wipe off excess and wash with water. Typical Applications Anti-Heat° can be used effectively to protect thin gauge metals from objectionable heat inflow due to welding, brazing, soldering or other heat sources. Will also protect components, parts etc. from heat related damages, such as gasket of a valve being welded to pipes, or paint on automobiles while being locally repaired by brazing, soldering or welding. Part No. AHTB AHQT AHGL AH5GL Description Anti-Heat Anti-Heat Anti-Heat Anti-Heat UM 12 oz. tube 1 qt 1 gal 5 gal

2 oz Tempilaq°

Part No. TL0175 TL0200 TL0225 TL0250 TL0275 TL0300 TL0313 TL0325 TL0350 TL0363 TL0375 TL0400 TL0425 TL0450 TL0475 TL0488 TL0500 TL0525 TL0550 TL0575 TL0600 TL0650 °F 175 200 225 250 275 300 313 325 350 363 375 400 425 450 475 488 500 525 550 575 600 650 °C 79 93 107 121 135 149 156 163 177 184 191 204 218 232 246 253 260 274 288 302 316 343 Part No. TL0700 TL0750 TL0800 TL0850 TL0900 TL0950 TL1000 TL1022 TL1050 TL1100 TL1150 TL1200 TL1250 TL1300 TL1400 TL1450 TL1500 TL1600 TL1700 TL1800 TL1900 TL2000 °F 700 750 800 850 900 950 1000 1022 1050 1100 1150 1200 1250 1300 1400 1450 1500 1600 1700 1800 1900 2000 °C 371 399 427 454 482 510 538 550 566 593 621 1121 649 704 760 788 816 871 927 982 1038 1093

Tempilaq° is made of the same materials as Tempilstik°. This material is suspended in a quickdrying, inert vehicle. Most are non-flammable. Tempilaq° is available in the same 102 temperature ratings as Tempilstik° and carries the same + 1% accuracy. Lot numbers on each bottle allow it to be traced to the specific batch of raw material from which it was made. Apply a thin coating of the appropriate Tempilaq° by brush to the workpiece before heating begins. It dries almost instantly to a dull opaque mark. When its specified temperature is reached, the Tempilaq° mark liquifies (melts) sharply.

CAUTION - Disregard any color change that may occur during heating. This has no significance. It is only the melting of the Tempilaq° mark that indicates when the rated temperature has been reached. Upon cooling, the melted Tempilaq° mark will solidify to a glossy-transparent appearance.

Tempilaq° can be diluted to any desired consistency without changing its melting point. The thinner the coating used, the quicker the reaction time will be when temperature has been reached. Use only Tempilaq° thinner, and only the thinner recommended for the specific temperature rating being used. Cleaning: Same procedures as for Tempilstik

Tempilaq°

Part No. TL0175QT TL0275PT TL0950PT °F 175 275 950 °C 79 135 510 UM 1 qt 1 pt 1 pt

Applications Tempilaq° should be used on surfaces which cannot be easily marked with a Tempilstik°, such as polished metal, glass, plastics, rubber, fabrics or electronic components. It should also be used for making larger marks than can conveniently be made with Tempilstik° (for viewing at a distance). It is widely used for monitoring critical temperatures in the electronics field, such as preheat temperatures for wave soldering. Other applications include dielectric heatsealing, postforming plastic laminate, and annealing polished metal surfaces.

Page 509

Information

untitled

5 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

926491