Read 8xx.bk text version

HiPath 1100

HiPath 1120 HiPath 1130 HiPath 1150 HiPath 1190

Instruction Manual System Telephone Profiset 3030

Contents

Installation Recommendations ................... 3

Installation ......................................................................... 4

Profiset 3030 System Telephone ................ 5

Characteristics................................................................... Status Indication Keys ....................................................... Function Keys for Profiset 3030 - S30058-H6202-A1/A2 .. Function Keys for Profiset 3030 - S30058-H6202-C5/C6 .. Adjusting the Ring Volume.............................................. Adjusting the Ring Melody .............................................. Adjusting the Reception Volume..................................... Dialing Mode ................................................................... Display Brightness .......................................................... Time Format.................................................................... Adjusting the Hands-free Volume ................................... Other Settings ................................................................. 5 7 8 9

Configuration.............................................. 10

10 11 12 13 14 15 16 16

Diagram of the Navigation Menu ............. 18

2

Installation Recommendations

Installation Recommendations

· Place the telephone on a non-slip surface. Polished or varnished surfaces can be marked by some parts of the telephone, such as the rubber feet. To ensure good hands-free conversation quality, place the telephone on a flat surface and keep the area in front of the microphone free of obstructions. To avoid interference, keep the telephone at least one meter away from cordless telephones, mobile telephones, television sets and other electrical equipment. The Profiset 3030 telephone must be installed at a maximum distance of 500 meters from the telephone exchange by using a two-pair cable with 0.4mm2 copper wire. The telephone must not be exposed directly to the sun or other heat sources, nor be installed in dusty or excessively humid locations, as this will reduce its useful life. It should be used at temperatures between 5 ºC and 50 ºC and it is not waterproof. To clean the telephone, use a damp cloth and avoid abrasive cleaning products. Do not use a dry cloth, because it may cause electrostatic discharges that could damage the equipment. When the telephone reaches the end of its useful life, dispose of it in a way that does not harm the environment, in accordance with local legal requirements.

·

·

·

·

·

·

CE Mark

The device conforms to the EU guideline 99/5/ ECC, as attested by the CE mark.

3

Installation Recommendations

Installation

Connecting the Handset to the Telephone:

· · · Insert the long, straight end of the spiral cord into the connector with the symbol, until it snaps in. Connect the short end to the handset. Press the cord into the cable guide.

Line Cord Connection

· Insert one end of the straight cord into the connector with the symbol and the other end into the phone jack of the extension to which you want to connect the equipment. Press the cord into the cable guide.

·

Labeling Strip

Your Profiset 3030 telephone has a labeling strip for writing down names, telephone numbers and functions stored in the programmable keys. If you need to change the labels, cut out the template supplied on the last page of this manual.

4

Profiset 3030 System Telephone

Profiset 3030 System Telephone

This is a telephone exclusive to the HiPath 1100 and euroset line systems. It allows direct access to some PABX features, and has special functions for monitoring the status of external lines and extensions using signals from a group of programmable keys.

Characteristics

It has a 3-line display · The first line displays the MUTE symbol, the repeat call counter, the repeat call indicator, and the time and date. The time is shown in 24-hour or AM/PM (hours:minutes) format and the date in day/month format (for example, 11:13 28/08). When you are in operator terminal mode, the number of unanswered internal, external and recalled calls is shown on the second line (16 digits). The messages are shown, 16 characters, on the third line.

·

·

1.

MUTE indicator symbol activated

2. Repeat call counter 3. Time 4. AM/PM indicator 5. Date 6. Repeat call indicator 7 . Field for operator terminal 8. Field for alphanumeric characters

5

Profiset 3030 System Telephone Profiset 3030 - S30058-H6202-A1/A2

Profiset 3030 - S30058-H6202-C5/C6

1. 2. 3. 4. 5. 6.

Handset cradle Function keys Programmable keys with status indicator LEDs Hands-free loudspeaker Hands-free microphone Display 6

Profiset 3030 System Telephone

Status Indication Keys

Key off; the extension or external line is free. Key blinking slowly; a call is parked. Key blinking faster; an incoming call to the extension has not been answered. Key blinking fastest; signals an incoming call or a recall. Key is on; the extension is busy.

7

Profiset 3030 System Telephone

Function Keys for Profiset 3030 - S30058-H6202-A1/A2

FWD key forwards calls to an extension or external telephone. PARK key parks a call. HOLD key puts a call on hold. SPEAKER key, activates hands-free mode using microphone and loudspeaker. REDIAL key redials the last number called1. MENU key for access to menu-driven configuration settings. FLASH key invokes the flash function for the external line. FEATURE key activates the system functions (for example, Forward, Do not disturb, etc). MUTE key deactivates voice transmission so the person with whom you are speaking cannot hear you any more. To reactivate voice transmission, press the key again. Confirmation key Menu navigation key Menu navigation key

1.The REDIAL function key is only used for telephone MENU navigation

on HiPath 1100 5.2 systems.

8

Profiset 3030 System Telephone

Function Keys for Profiset 3030 - S30058-H6202-C5/C6

NOTE: Profiset 3030 S30058-H6202-C5/-C6 can only be used in Version 5.2.

Navigation Key Shows PREVIOUS option Navigation Key. Shows NEXT option. Confirmation Key Selects (confirms) the displayed option. SPEAKER key, activates hands-free mode using microphone and loudspeaker. REDIAL key redials the last number called. MENU key for access to menu-driven configuration settings. FLASH key invokes the flash function for the external line. FEATURE key activates the system functions (for example, Forward, Do not disturb, etc). MUTE key deactivates voice transmission so the person with whom you are speaking cannot hear you any more. To reactivate voice transmission, press the key again.

9

Configuration

Configuration

For greater user convenience, the Profiset 3030 system telephone provides some configuration options. The following keys are used in configuration mode: Profiset 3030 - S30058-H6202-A1/A2

and

or

and

h

Profiset 3030 - S30058-H6202-C5/C6

and

or

and

h

Adjusting the Ring Volume

The ring volume can be adjusted to 6 levels.The ring volume is preset to level 6.

Telephone in Idle State:

Replace the handset. Press this key to enter configuration mode. Ring Volume 1 or keys, locate With the the ring volume option on the display. Press this key to select the ring volume adjustment option. Ring Volume 2 Use the or key to change the ring volume. After choosing a volume level, press this key to confirm.

or

and

Continue navigating through the menu options or press the Menu key to finish the configuration.

10

Configuration

Adjusting the Ring Melody

You can choose among 3 ring melodies.

Telephone in Idle State:

Replace the handset. Press this key to enter configuration mode. or keys, With the locate the melody option on the display. Press this key to select the melody selection option. melody 1 or keys Use the to hear the ring melody. Choose a melody and press this key to confirm.

melody

1

or

and

Continue navigating through the menu options or press the Menu key to finish the configuration.

11

Configuration

Adjusting the Reception Volume

The reception volume on the Profiset 3030 can be adjusted during a conversation (6 levels). The reception volume is preset to level 4. Press this key to enter configuration mode. or keys, With the locate the volume RX option on the display. Press this key to select the volume RX option. or keys Use the to change the reception volume. After choosing a volume level, press this key to confirm.

volume RX

1

volume RX

1

or

and

Continue navigating through the menu options or press the Menu key to finish the configuration.

12

Configuration

Dialing Mode

If your system is not working because of a power outage and the external telephone line has been switched directly to your Profiset 3030 system telephone, you will need to specify the dialing mode (pulse or tone) for this line, because in normal operation the telephone exchange performs this setting automatically.

Telephone in Idle State:

Replace the handset. Press this key to enter configuration mode. Mode tone With the or keys, locate the mode option on the display. Press this key to select the mode option. Mode tone or keys Use the to choose the dialing type, Tone or Pulse. After choosing a dialing mode, press this key to confirm.

or

and

Continue navigating through the menu options or press the Menu key to finish the configuration.

Temporary Change of Dialing Mode:

When the telephone is set to PULSE dialing, you may occasionally need to temporarily change the dialing mode to TONE dialing. Example: You want to check your bank balance using your telephone banking service. Make the call as you usually would and, as soon as the call is completed, press to change the dialing mode to TONE dialing. When you finish the call, just hang up and the dialing mode will automatically switch back to PULSE dialing.

13

Configuration

Display Brightness

The display brightness can be adjusted to 3 levels; it is preset to level 2.

Telephone in Idle State:

Replace the handset. Press this key to enter configuration mode. bright 1 With the or keys, locate the bright option on the display. Press this key to select the bright option. bright 1 or key Use the to select one of the 3 brightness levels. After choosing a brightness level, press this key to confirm.

or

and

Continue navigating through the menu options or press the Menu key to finish the configuration.

14

Configuration

Time Format

The time can be shown on the display in 24-hour or AM/PM format.

Telephone in Idle State:

Replace the handset. Press this key to enter configuration mode. Format 24 hs With the or keys, locate the format option on the display. Press this key to select the format option. format am pm Use the or keys to select 24 hs or am pm. After choosing a format, press this key to confirm.

or

and

Continue navigating through the menu options or press the Menu key to finish the configuration.

15

Configuration

Adjusting the Hands-free Volume

You can adjust the hands-free volume (6 levels) on the Profiset 3030 during a conversation. The hands-free volume is preset to level 4.

Telephone in Hands-free Mode:

Press this key to switch to handsfree mode. Press this key to enter configuration mode. vol hands-free 1 or keys Use the to select one of the 6 volume levels. Press this key to finish the configuration.

Other Settings

You can make additional settings with the following sequence:

+ Code

00 01

+ Code

Description

Sets DTMF 85/85ms and enables DTMF mode Sets DTMF 140/85ms and enables DTMF mode

16

Configuration

Code

02 03 04 05 06 07 08 09 10 11 12 13 14 15 20

Description

Sets pulse dialing open/closed ratio to 2:1 (33/66ms) and enables pulse dialing Sets pulse dialing open/closed ratio to 1.5:1 (40/60ms) and enables pulse dialing Automatic gain control disabled Automatic gain control enabled Ring frequency discrimination in the 15-75Hz range (in case of power outage) Ring frequency not discriminated Line impedance 600 (in case of power outage) Line impedance 1000 (in case of power outage) DTMF 85/85ms DTMF 140/85ms Pulse dialing proportion open/closed 2:1 (33/66ms) Pulse dialing proportion open/closed 1.5:1 (40/60ms) Time format DD/MM Time format MM/DD This code cancels the language setting configured by the user (manual configuration) and activates the system's default setting (automatic configuration). Portuguese (Brazil) Portuguese (Portugal) English (default) French Spanish Normal level of transmission High level of transmission Very high level of transmission Return to factory programming For more detailed feature explanations, refer to your telephone exchange's user guide.

21 22 23 24 25 31 32 33 99

17

Diagram of the Navigation Menu

Diagram of the Navigation Menu

Level 1 Menu RING VOLUME Level 2 Level 3

1 2 3 4 5 6 1 2 3

MELODY

MODE

TONE PULSE

FORMAT

24 HS AM PM

BRIGHT

1 2 3 1 2 3 4 5 6

VOLUME RX

18

Produzido no Pólo Industrial de Manaus

A31003-K1250-B816-13-7619

1P A31003-K1250-B816-13-7619 The information in this document contains general descriptions of the technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. Ref. No.:A31003-K1250-B816-13-7619 ·Printed in Brazil · 26.09.06 © Siemens Ltda 2006 · Rua Pedro Gusso, 2635 · Curitiba-PR/BR

Subject to availability. Right of modification reserved.

Information

8xx.bk

22 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

406604


You might also be interested in

BETA
8xx.bk