Read 2009-2010_catalog%2092.pdf text version

ALLOY/STRUCTURAL -- MACHINE SCREWS

CM WP ME HA

4-40

MS51957 / MS51958 STAINLESS MACHINE SCREWS

· Phillips Pan Head · 300 Series Stainless Steel · Finish - Passivate per QQ-P-35

Thread Length .188 .250 .312 .375 .438 .500 .625 .750 .188 .250 .312 .375 .438 .500 .625 .750 .875 1.00 .188 .250 .312 .375 .438

2-56

AP LG EP CS IN EL AV TO PS BV

6-32

Fingertip Assembly

Phillips Price Phillips Price Thread Length Part No. Each Part No. Each 6-32 .500 MS51957-30 . MS51957-2 . .625 MS51957-31 . MS51957-3 . .875 MS51957-33 . MS51957-4 . MS51957-5 . 1.00 MS51957-34 . MS51957-6 . .250 MS51957-41 . MS51957-7 . .312 MS51957-42 . MS51957-9 . .375 MS51957-43 . MS51957-10 . .438 MS51957-44 . MS51957-12 . 8-32 .500 MS51957-45 . MS51957-13 . .625 MS51957-46 . MS51957-14 . .750 MS51957-47 . MS51957-15 . .875 MS51957-48 . MS51957-16 . 1.00 MS51957-49 . MS51957-17 . .312 MS51958-60 . MS51957-18 . .375 MS51958-61 . MS51957-19 . .438 MS51958-62 . MS51957-20 . 10-32 .500 MS51958-63 . MS51957-21 . .625 MS51958-64 . MS51957-25 . .750 MS51958-65 . MS51957-26 . .875 MS51958-66 . MS51957-27 . 1.00 MS51958-67 . MS51957-28 . 1.25 ms51958-68 . MS51957-29 .

· Phillips 100° Flat Head · Fully Threaded · Alloy Steel (8740) · Finish - Cadmium per QQ-P-416 Type II · Tensile -125,000 145,000 PSI

NAS514 MACHINE SCREWS

Thrd.

4-40

6-32

8-32

10-32

Ideal for abrasion and cutting protection of wiring, antenna leads, tubing, cables, etc. that are routed through bulkheads, ribs and other internal aircraft structures. Made of hard black nylon. Drill a hole about 1/8" larger than bushing I.D. and insert bushing. Spring-like fingers snap out to hold it in place. Special sizes on request with 100 piece minimum. *For .062" max. bulkhead thickness. All others for .125" max. bulkhead thickness.

SNAP BUSHINGS

Mounting Hole Bushing Price Mounting Hole Bushing Price Part No. Dia. I.D. Ea. Part No. Dia. I.D. Ea. 04-05700* .250 1/8" . 04-05753 .500 3/8 . 04-05710* .312 3/16" . 04-05775 .625 1/4" . 04-05730 .375 1/4" . 04-05773 .625 1/2" . 04-05738 .437 1/4" . 04-05790 .750 3/8" . 04-05758 .500 1/4" . 04-05793 .750 9/16" . *For .062" max. bulkhead thickness. All others for .125" max. bulkhead thickness. Less 15% Discount on 100 pieces per size.

Converts raw-edged holes to smooth, neat, insulated holes. Locking fingers "snap" into holes with fingertip pressure. Locking finger steps are designed at fractional increments to accommodate a range of panel thicknesses up to .250" (6,4 mm). Withstands a push back force of 35 pounds.

Part Dimensions Panel Dimensions P/N UL/CSA A Inside B Head C Overall Maximum Mounting Hole Color DesigDiameter Diameter Height Thkness Dia. nation in. mm. in. mm. Black in. mm. in. mm. in. mm.

SNAP BUSHINGS

Thrd Grip .125 .188 .250 .312 8-32 .375 · Phillips 100 Deg. Flat .438 Head .500 · Alloy Steel Per .562 Mil-S-6049 .625 .688 · Finish - Cad Plate per .750 QQ-P-416 Type II .125 .188 .250 .312 .375 10-32 .438 .500 .562 .625 .688 .750 .812 .875 1.00

NAS517 FLUSH HEAD SCREWS

Length .250 .312 .375 .438 .500 .625 .750 .188 .250 .312 .375 .438 .500 .625 .750 .875 1.00 .250 .312 .375 .438 .500 .625 .750 .875 1.00 1.25 .250 .312 .375 .438 .500 .625 .750 .875 1.00 1.25

Lgth .469 .531 .594 .656 .719 .781 .844 .906 .969 1.031 1.093 1.156 .406 .469 .531 .594 .656 .719 .781 .844 .906 .969 1.031 1.093 1.156 1.219 1.281 1.406

Phillips Part No. NAS514P440-4P NAS514P440-5P NAS514P440-6P NAS514P440-7P NAS514P440-8P NAS514P440-10P NAS514P440-12P NAS514P632-3P NAS514P632-4P NAS514P632-5P NAS514P632-6P NAS514P632-7P NAS514P632-8P NAS514P632-10P NAS514P632-12P NAS514P632-14P NAS514P632-16P NAS514P832-4P NAS514P832-5P NAS514P832-6P NAS514P832-7P NAS514P832-8P NAS514P832-10P NAS514P832-12P NAS514P832-14P NAS514P832-16P NAS514P832-20P NAS514P1032-4P NAS514P1032-5P NAS514P1032-6P NAS514P1032-7P NAS514P1032-8P NAS514P1032-10P NAS514P1032-12P NAS514P1032-14P NAS514P1032-16P NAS514P1032-20P

Price Ea. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phillips Part No. NAS517-2-1 NAS517-2-2 NAS517-2-3 NAS517-2-4 NAS517-2-5 NAS517-2-6 NAS517-2-7 NAS517-2-8 NAS517-2-9 NAS517-2-10 NAS517-2-11 NAS517-2-12 NAS517-3-0 NAS517-3-1 NAS517-3-2 NAS517-3-3 NAS517-3-4 NAS517-3-5 NAS517-3-6 NAS517-3-7 NAS517-3-8 NAS517-3-9 NAS517-3-10 NAS517-3-11 NAS517-3-12 NAS517-3-13 NAS517-3-14 NAS517-3-16

Price Ea. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.125 3,2

AN535 DRIVE AN535 MS21318 SCREWS Dash # Dash # -00-4 -3

-0-4 -2-3 -2-4 -4-4 Hardened steel -00-2 screws to make per- -00-3 manent fastenings to -0-2 ferrous and non-fer- -0-3 rous castings, heavy -2-2 gauge steel, plastics, -4-3 etc. Cadmiumplated. -4-5 -9 -14 -15 -21 -1 -2 -7 -8 -13 -20 -22

1.093 - 27, SB1093 2163 .875 22,2 1.218 30,9 .453 11,5 1.125 8-28 ,6 - 14 1.093 - 27, SB1093 .125 3,2 2166 .937 23,8 1.218 30,9 .453 11,5 1.125 8-28, 6 -15 Model 2163 ...... P/N 04-01985 ...................... . Model 2166 ...... P/N 04-01986 ...................... .

Dia. Length Sugg. Price In. In. Drill Size Each .060 1/4 #55 (.052") . .075 1/4 #51 (.067") . .100 3/16 #44 (.086") . .100 1/4 #44 (.086") . .116 1/4 #37 (.104") . .060 1/8 #55 (.052") . .060 3/16 #55 (.052") . .075 1/8 #51 (.067") . .075 3/16 #51 (.067") . .100 1/8 #44 (.086") . .116 3/16 #37 (.104") . .116 5/16 #37 (.104") .

Part No. 04-00182 04-00183 04-00184 04-00189

Set screws are used to provide immediate, binding location of various parts on shafts. Maximum holding pressure is made by the cup point edge gripping the contact suface. Allen head wrenches are used to operate set screws.

Thread Length 8-32 3/16 8-32 1/4 10-32 1/4 10-32 1/2 Price . . . . Part No. 04-00191 04-00189 04-00191 Thread Length 1/4-28 5/16 10-32 1/2 1/4-28 5/16 Price . . .

SET SCREWS

Set Screw - Socket Products Type: Socket Set Screws Point Type: Cup Thread Size: 10-32 Overall Length: 1/4 Material: Alloy Steel - Grade 8 Finish/Coating: Black Oxide. Key Size (Inch): 3/32. Metalworking Book: 2085. Big Book: 1830 P/N 04-01032..................................... Material: 6/6 Nylon Certifications: File E15331 File LR8919 Flammability Rating: 94V-2 Material Temperature Index: 125°C (257°F)­Max. temperature on part not to exceed 105°C (221°F) Insulating feed-thru bushings for limited internal clearance applications. P/ N 04-02026 ...............................

10-32 X1/4 INCH ALLEN SET SCREW

SHORTY BUSHING 2820

Spec. MS21318

92

Information

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

240202