Read TDS_350HS.pdf text version

350 HS

2K HS ACRYLIC CLEAR COAT

DEFINITION

E27

VERSION:03.09.03 Page: 1/2

350 HS is a 2K High solids Acrylic Polyurethane clear coat which is very easy to apply. It stands out for its high quality finish as well as great resistance and durability. Its high solid contents allows it to offer finishing of great luminosity and excellent gloss, a perfect clear coat to use in large repairs.

PHYSICAL CHARACTERISTICS

Nature: Colour: Specific weight: Viscosity CF/4: Dry film thickness: Yield: Voc: Solids content: Acrylic 2K Colourless 1,0 kg/l at 20ºC 18" at 20ºC 60 microns 2 coats 2 10-12 m /l 478 g/l Application 52 % Application 52 % 350 HS

AUXILIARY PRODUCTS

C354 C355 C356 Slow Hardener Standard Hardener Fast Hardener S322 Standard thinner FLEXILAC Flexible Additive

SURFACE PREPARATION

Apply 350 HS on the basecoat after the flash off time recommended by the manufacturer.

MIXING RATIO

APPLICATION METHOD

350 HS

mm bar cm

C354 18" C355 100:50:0-5 volume 2:1 F/4 at 20ºC

2,5 h

1.2

3

15 - 20

2,5 h

1.3

4

15 - 20

2

5`

C356

1h

1.2

2

10

350 HS

2K HS ACRYLIC CLEAR COAT

E27

VERSION:03.09.03 Page: 2/2

DRYING TIMES

20º C

60º C

IR -OC

FLASH OFF

FULL BAKE

C354

35'

4h

6h

8h

24h

C354

40'

40'

LIGHT

5'

10'

C355

25'

3h

5h

7h

24h

C355

30'

30'

DARK

4'

8'

C356

20'

2h

4h

6h

24h

C356

--

--

METALLIC

5'

10'

REMARKS

Humidity affects clear coat components so the application equipment should be absolutely dry. Close the hardener container immediately after use. Do not use when relative humidity is higher than 70%. Do not use at temperatures lower than +10ºC. In this case dry in spraybooth.

EQUIPMENT CLEANING

Use a cleaning thinner before the pot life has expired.

SAFETY

Follow instructions of product label. For more information check the Safety Data Sheet SDS 722/EN. Compliant with the National Statutory Regulation for Health and Safety at Work and Waste Disposal.

STORAGE

Store the product in a ventilated place far from direct exposure to sunlight. Keep between +5ºC and +30ºC. SUGGESTION: In unopened original packaging, one year from manufacturing date. Regulate product temperature to 20ºC before its application. For a good levelling product temperature is even more important than room temperature.

GUARANTEE

For any technical information contact with our Customer Attention Service or our Technical Department. ROBERLO SA declines any responsibility due to an incorrect use of the product.

ROBERLO S.A. · Ctra. N-II, km 706,5 · 17457 RIUDELLOTS DE LA SELVA (Girona) SPAIN Tel. +34-972 478 060 · Fax +34-972 477 394 · e-mail: [email protected]

Information

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

603983