Read Microsoft Word - Manual BD-5300S_B.doc text version

Sony Optiarc BD-5300S

Laser Safety Information

User's Guide applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potentially negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product

Sony Optiarc BD-5300S

4. Load/ Eject Button

This button is pressed to eject or retract the disc tray when the power is on.

User's Guide 4. Connect the S-ATA data connector on the BD Writer and the S-ATA controller.

Rear view

This drive employs a laser. Do not remove the cover or attempt to service this device when connected due to the possibility of eye damage.

Caution

The use of controls , adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure.

6s Power Connector (S-ATA)

Use this to provide operating power from the host computer.

To avoid transmission errors please do not use S-ATA cable longer than 50 cm. 5. Slide the BD Writer into the computer and fix it in the computer cabinet with 4 screws. To avoid damage to the BD Writer take care that the screws do not reach more than 5 mm into the BD Writers cabinet. 6. Replace the mounting clips, keeper bracket, and computer cover. Refer to the operation guide that came with the computer for help with this step.

Front view

7s I/O BUS Connector (S-ATA)

This BUS connector is used to control the BD Writer and data transmission.

Laser Specification

Semiconductor Laser: 121mW, 780-788nm; 109mW, 652663nm

Installation

1. Busy Indicator

This indicator lights during data read and write operation. 1. Turn off the computer, other peripherals and unplug all the cords and cables. Then remove the computer cover, face plate, mounting clips, and keeper bracket. Refer to the operation guide that came with your computer for help with this step. 2. Slide the BD Writer into the computer until it is out approximately 50 ~ 70 mm. 3. Locate a spare power cable in your computer and connect it to the power connector on the back of the BD Writer.

Driver Installation

When you restart your computer, driver installation starts by activating the reading function of the drive (CD-ROM). If you are using the BD Writer with Windows 95/ 98/ ME /XP /Vista / Win7 or IBM OS/2 Warp/Linux/ Mac OS, all necessary drivers will be loaded automatically by the operating system. Drivers mentioned above are part of the Operating Systems and not available from Sony Optiarc. Note: Your computer's S-ATA connection/controller must support the ATAPI command set. Some computer

Disposal of Old Electrical & Electronic Equipment

(Applicable in the EU and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the

Sony Optiarc Europe

2. Tray Panel

This panel prevents dust from entering the Optiarc Writer and opens automatically when the Load/Eject button is pushed.

3. Emergency Eject Hole

Use to remove the disc from the BD Writer if the electrical eject is disabled by software or if power failure occurs. (Please refer to ,,Emergency Eject"for details)

1

Sony Optiarc Europe

2

Sony Optiarc BD-5300S

motherboards have S-ATA RAID chipsets and/or BIOS that do not support the ATAPI command set used by optical disc drives. If you are unsure, consult your motherboard manual or vendor web site for compatibility, BIOS versions and BIOS settings.

User's Guide

Sony Optiarc BD-5300S

1. Turn off the power to the BD Writer/PC. 2. If a disc inside is still spinning wait until it stops. 3. Insert a steel rod (about 1.3 mm in diameter) into the emergency eject hole and push firmly until the cartridge is ejected. A stiff paper clip may be used as steel rod.

User's Guide

Vertical Use

The BD Writer can be used in the vertical position. When using the BD Writer, in the vertical position, load and unload discs as shown on the diagram below.

Support

For further information, various file downloads and hotline support please visit our Website: http://www.sony-optiarc.eu

Playback/ Writing Software Installation

Not supplied with this drive Please insert your software CD-ROM into the BD Writer and use the information provided with the software (if the installation does not start automatically you have to activate the software installation manually)

Notes on discs

1. To keep a disc clean, do not touch its surface. Handle the disc by its edge. Only 12 cm discs can be used when the BD Writer is installed vertically. Do not place 8cm discs in the tray when using the BD Writer installed in this way. 2. Keep discs in their cases or disc magazines when not in use. 3. Do not attach labels, or use discs with sticky ink/residue. Such discs may stop spinning when used, causing malfunction, or may ruin the unit.

Region codes

BD/DVD-Video (discs) playback is protected and controlled by a region code setting. For the drive to play back BD/DVD-Video, the region code on the BD/DVD disc, the region code of the drive, and the region code of the BD/DVD-Video software must all match. The region code can be set up to five times, including the initial assignment. After setting the region code five times, the setting becomes permanent and can no longer be changed. From this point on, you are only able to play back DVD-Video whose region code matches the one set the fifth time. Do not attempt to make unauthorized changes to the region code. Any problems resulting from doing so are not covered by the warranty.

Emergency Eject

The procedure described below can be used to open the tray of the BD Writer if the EJECT button is disabled by software or a power failure occurs.

4. Do not use discs with labels or stickers. 5. Discs with non-standard shapes (e.g. heart, square, star) cannot be played on this unit. Attempting to do so may damage the drive.

3 Sony Optiarc Europe 4

Sony Optiarc Europe

Sony Optiarc BD-5300S

Data Section

Transfer Rate

User's Guide

READ

WRITE

BD ROM (SL/DL) BD R (SL/DL)) BD RE (SL) BD RE (DL) DVD-ROM /-R/+R DVD-R DL/+R9 DVD-RW/+RW DVD-RAM CD-ROM, CD-R CD-RW CD-DA BD-R(SL) supported speeds BD-R(DL) supported speeds BD-RE(SL/DL) supported speeds DVD+R supported speeds DVD+R9 supported speeds DVD+RW supported speeds DVD-R supported speeds DVD-R DL supported speeds DVD-RW supported speeds DVD-RAM(Vers. 2) supported speeds CD-R supported speeds CD-RW supported speeds

8x CAV max 8x CAV max 8x CAV max 6x CAV max 16x CAV max 12x CAV max 12x CAV max 12x PCAV max 48x CAV max 40x CAV max 48x CAV max 12x max (12x CAV), (6x/8x/10x PCAV), (2x/4x CLV) 8x (6x/8x ZCLV), (2x/4x CLV) 2x max 2x CLV 16x max 4x/ 6x CLV, 8x/12x PCAV, 16x CAV 8x max 2.4x/4x CLV, 6x/8x ZCLV 8x max 2.4x/4x 6x CLV, 8x ZCLV 16x max 4x/ 6x CLV, 8x/12x PCAV, 16x CAV 8x max 4x CLV, 6x/8x ZCLV 6x max 2x/4x CLV / 6x ZCLV 12x max 2x/3x/5x/6x CLV, 8x/12x PCAV 48x max 16x/24x/32x/40x/48x 24x max 4x/10x/16x/24x

Write methods Access Time

Compatibility

In compliance with General

Memory Buffer Interface Voltage tolerance Dimensions ( W x H x D) Weight Noise Operating condition Non operating Condition

DAO (disc at once), SAO (session at once), TAO (track at once) with zero gap, variable or fixed packet, multisession SL: 250 msec, DL: 380 msec BD Medium(Random seek) DVD Medium (Random seek) SL: 150 msec, DL: 160 msec 150 msec CD Medium (Random seek) BD-ROM, BD-ROM DL, BD-R, BD-R DL, BD-RE, BD-RE DL,DVD-ROM, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW, DVD-RAM, CD-Audio,CD-ROM (Mode 1 and mode 2), CD-ROM XA (Mode 2, form 1 and form 2), Photo CD (Single and multiple sessions), CD Extra, CD-TEXT, CD-R and CD-RW discs. MPC level 3, PC2001, MultiRead/UDF compliant, Win XP, Win Vista, Win 7

8 MBytes Serial ATA , max. 1.5 +5V (DC) +/- 5 %, +12V +/-10% 146 x 41.3 x 1270 mm without Bezel .64 kg 52.5 dB max. 5°C min, 50 °Cmax 15% min, 80% max -40°C min, 65°C max 5% min, 95% max

Ambient Temperature Relative Humidity Ambient Temperature Relative Humidity

Above specifications are subject to change. Microsoft, Windows, and Windows Vista are registered trademarks Microsoft Corporation, Photo CD is a trademark of Kodak. Sony Optiarc Europe 5

Information

Microsoft Word - Manual BD-5300S_B.doc

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

96884