Read steam-system-training-2011.pdf text version

New for 2011

Boiler Plant regulations & guidelines

Steam System Training 2011

Courses for:

Accountants Boiler Operators Boiler Plant Managers Consultants Contractors Control Engineers Directors Energy Managers Factory Managers Graduate Engineers Installation Managers Instrument Engineers Maintenance Engineers Maintenance Managers Plant Designers Plant Engineers Plant Operators Process Engineers Project Engineers Quality Managers Technicians Utility Engineers Validation Staff

w

.S ww

pira

xSa

om / r c o .c

u k / tr a

in in g

Contents

Spirax Sarco and training .......................................................................... Page 1 BTeC qualifications ................................................................................... Page 2 Correspondence courses ........................................................................... Page 3 Steam and Condensate Loop book ............................................................. Page 3 Introduction to Steam and Condensate Systems

B1 ­ Introduction to Steam and Condensate Systems ................................................................... Page 4

Controls and Heat Transfer Applications

C1 ­ Controls and Heat Transfer Applications ................................................................................ Page 4

Steam System Design, Sizing and Selection

D1 ­ Design of Steam and Condensate Services ........................................................................... Page 5 D2 ­ Understanding Pressure and Temperature Control ................................................................ Page 5 D6 ­ Steam Boiler Plant, Controls and Systems ............................................................................. Page 6 D7 ­ Clean and Pure Steam Systems ............................................................................................ Page 6

Ne w!

D8 ­ Boiler Plant Regulations and Guidelines ................................................................................ Page 7

Steam Plant Maintenance

M1 ­ Maintenance of Steam Systems ............................................................................................ Page 7 M2 ­ Steam Plant Maintenance: City & Guilds Module 13 .............................................................. Page 8 M3 ­ Safety Valve Accreditation ..................................................................................................... Page 8

Boiler operation Accreditation Scheme (BoAS)

D6A ­ An accreditation course for boiler operators and boiler plant managers /supervisors leading to a national qualification ......................................................................................... Page 9 D6AR ­ Boiler Operation Accreditation Scheme (BOAS) Refresher ................................................ Page 10

energy Savings

E1 ­ Boosting the Bottom Line ...................................................................................................... Page 11

water Treatment

W1 ­ Boiler Water Treatment ......................................................................................................... Page 11

other courses

COM ­ Combustion Efficiency ....................................................................................................... Page 12 SEM1 ­ Seminar: Metering ............................................................................................................ Page 12 OS ­ On-site courses .................................................................................................................... Page 13

Additional information (how to book courses, etc.) ................................................................. Page 14 Training course timetable.................................................................................................. Page 15-16 Course registration form.................................................................................................... Page 17 Information request form .................................................................................................. Page 18

Spirax Sarco provides the highest levels of training, service and technical back-up

Spirax Sarco has an international reputation for top class training and many of its courses are approved by professional bodies, including: BTEC (Edexcel) City & Guilds Combustion Engineering Association (CEA) Chartered Institution of Building Services Engineers (CIBSE) Our aim is to help customers, designers, installers, users, operators and maintainers of steam systems, achieve the maximum benefit from their plant, efficiently and safely. Each delegate is supplied with handouts, including technical publications, to support each course, and are issued with a certificate on completion of the course from Spirax Sarco or, where appropriate, BTEC, City & Guilds or the CEA. Certificates for CPD purposes are available for every course.

Experienced trainers

The depth and knowledge of Spirax Sarco's trainers is the key to the exceptional reputation and high standard of these courses. All trainers are in touch with day-to-day issues and their solutions, and practical aspects of delegates' jobs. Courses are updated in-line with the latest regulations, technical developments and customer feedback.

Extensive facilities

The Training Centre at Spirax Sarco's headquarters in Cheltenham has three fully equipped lecture rooms and a practical demonstration area equipped with its own steam boiler plant and steam system. Early in 2011 work will begin to refurbish this facility to enable us to offer you up-to-date facilities and a modern steam system. Some venue changes will be required and these will be confirmed with course joining instructions or via Kim Mansfield on 01242 535211. The new venue for some courses next year - the Barceló Cheltenham Park Hotel - is one mile away from the Training Centre. The M1, M2 and M3 practical courses are the most affected, but the brochure entries provide the information you will need. We apologise for the inconvenience. However, it will mean that we have a bright, new, modern facility to welcome you to next year.

www.SpiraxSarco.com/uk/training

1

BTEC Qualifications

Formal measures of competence are increasingly being demanded and the following two BTEC Certificates have proved popular since their inception in 1997. The BTEC Certificates are nationally recognised qualifications in steam systems. They offer a broader base than the well established City & Guilds course (see M2, page 8) and are a combination of home study and Cheltenham based courses. No prior qualifications are necessary before working towards these certificates and students will be evaluated throughout by a variety of assessment methods. The Operation and Maintenance of Steam Systems ­ Level 2 To achieve this intermediate BTEC Certificate, students must successfully complete two units as follows: UNIT 1 UNIT 1 Steam Utilisation correspondence course (4 sections + final assessment) followed by: 3 day M1 Maintenance of Steam Systems course UNIT 2 Automatic Controls correspondence course (6 sections + final assessment) followed by: 1 day D2 Understanding Pressure and Temperature Control course followed by: 2 day D6 Steam Boiler Plant, Controls and Systems course Steam Utilisation correspondence course (4 sections + final assessment) followed by: 3 day D1 Design of Steam and Condensate Services course UNIT 2 Automatic Controls correspondence course (6 sections + final assessment) followed by: 1 day D2 Understanding Pressure and Temperature Control course followed by: 2 day D6 Steam Boiler Plant, Controls and Systems course Design of Steam Systems ­ Level 3 To achieve this advanced BTEC Certificate, students must successfully complete two units as follows:

A BTEC Certificate is awarded on successful completion of Units 1 and 2. Unit certificates can be offered if appropriate. In addition to Cheltenham based course fees, a single charge of £80 will be made for each certificate. For further information about the BTEC qualifications complete the form on page 18 or contact our Training Co-ordinator, Kim Mansfield, on 01242 535211.

2

Correspondence Courses

Spirax Sarco offers free-of-charge distance learning courses which have been designed to provide students with first class knowledge and reference for future years. No textbooks are required. The courses are supplied as a complete package and most include unit assessments and model answers. A Spirax Sarco tutor will mark the final assessment test. The tutor is also available for consultation by phone, fax or email. A detailed synopsis of each course, with an application form, is available on request. For further information on these courses, contact our Training Co-ordinator, Kim Mansfield, on 01242 535211 or tick the box on the Information Request Form on page 18.

1 Automatic Controls and Steam Utilisation courses can also be undertaken as part of a BTEC Certificate (see page 2).

The courses available are: Automatic Controls ­ An Introduction 1 This course aims to give a basic introduction to automatic controls, with specific emphasis on temperature control. It is useful to engineers who are involved with control systems and also for mechanical or electrical engineers who need a general appreciation of controls.

Steam Utilisation 1 This is the most comprehensive course on steam utilisation available. All users need to be aware of the properties of steam so that they can benefit from it fully. System designers need to be using the most modern steam systems available to maximise plant efficiency and operation. Those responsible for installing systems must be sure specifications are understood and those maintaining them need to be able to diagnose and rectify faults.

Hot Water Heating This course focuses on one small, but important part of the building services package ­ the hot water heating system. It broadly covers some aspects of the design function. It is beneficial to anyone whose work brings them into contact with hot water heating systems, providing basic knowledge for those who have not specifically trained as a heating engineer, such as works engineers, plant managers and hospital engineers.

Steam and Condensate Loop book

The most comprehensive practical guide to steam systems in recent times has arrived with the publication of The Steam and Condensate Loop book. This book explains the principles underpinning steam engineering and heat transfer. It covers all aspects of steam and condensate systems, from the boiler house, through the steam distribution system to the point of use, and recovering and returning condensate back to the boiler. For more information or to order a copy, visit www.SpiraxSarco.com/uk

3

B1 Introduction

C1 Controls and

to Steam and Condensate Systems

Who will benefit?

Plant operators and anyone needing an appreciation of steam and condensate systems and factors affecting their operation.

Heat Transfer Applications

Who will benefit?

Designers, plant engineers, control and instrumentation engineers and those responsible for the design, operation and energy efficiency of fluid control systems and heat transfer equipment.

Delegates will learn about:

· Basic fundamentals of steam and why it is used · The steam and condensate cycle · Component parts of a steam and condensate system · Good installation practices for best plant performance · Basic, safe operating requirements

Delegates will learn about:

· Control products ­ sizing, selection and application · SCADA systems · Heat transfer technology and applications · Calculating steam demand · Heat recovery and energy management

Objectives

To give a broad understanding of the purpose and safe operational requirements of steam and condensate systems and factors affecting their performance and plant output.

Objectives

To provide delegates with an understanding of control and heat transfer technologies and applications in order to improve plant performance and energy efficiency.

Duration

1 day

Duration

1 day

Dates

January 17 March 21 May 16 July 18 September 19 November 21 This course starts at 9:00am and finishes at 4:30pm.

Dates

March 4 July 25 December 1 This course starts at 9:00am and finishes at 4:30pm.

Cost

£249 + VAT

Cost

£249 + VAT

4

D1 Design of Steam and

D2 Understanding

Condensate Services

Who will benefit?

Designers, plant engineers and those responsible for the general layout of steam and condensate services. This is a project-based course designed to give delegates the opportunity to put the knowledge they have gained into practice, and to encourage discussion with other delegates and specialist engineers.

Pressure and Temperature Control

Who will benefit?

Plant engineers and those responsible for the selection and efficient operation of pressure and temperature controls, primarily in steam systems, although water systems will be discussed.

Delegates will learn about:

· Different types of pressure and temperature controls ­ direct acting, pilot operated, electric and pneumatic actuation · Types of controllers, signals, sensors, actuators and positioners · Valve selection and sizing · Applications for each type of control Note: A good technical knowledge is needed. Students will benefit by first taking the Automatic Controls correspondence course ­ see page 3.

Delegates will learn about:

· The fundamentals of steam · Steam distribution and pipe sizing · Steam trapping and checking · Condensate recovery and pipe sizing · Pressure reduction · Temperature control valve sizing · Flash steam recovery

Objectives

To provide specialist knowledge of current practices in steam and condensate systems, and also the factors to be considered in their design. Delegates undertake a steam system design exercise as part of the course.

Objectives

To provide delegates with a basic understanding of pressure and temperature control, with emphasis on selection and application rather than pure theory.

Duration

3 days

Duration

1 day

Dates

January 24 - 26 April 5 - 7 July 4 - 6 October 5 - 7 This course starts at 9:00am on the first day and finishes at 4:30pm on the third day. This course can be undertaken as part of a BTEC Certificate ­ see page 2.

Dates

April 4 August 1 November 28 This course starts at 9:00am and finishes at 4:30pm. This course can be undertaken as part of a BTEC Certificate ­ see page 2.

Cost

£747 + VAT

Cost

£249 + VAT

5

D6 Steam Boiler Plant

D7 Clean and Pure

Controls and Systems

Who will benefit?

Designers, energy managers, plant engineers, maintenance engineers and boiler operators involved in the planning or upgrading of boiler plant, and those responsible for the day-to-day running of steam boilers ­ large and small.

Steam Systems

Who will benefit?

Designers, plant engineers, quality managers, maintenance staff and validation/sterilisation staff with responsibility for the design and operation of clean and pure steam systems. The course will be particularly relevant to those working in the pharmaceutical, biotechnology, food and healthcare sectors.

Delegates will learn about:

· Boiler types and fittings · Feedwater treatment, deaeration and storage · Boiler water level control and alarms · Blowdown controls, vessels and pits · Heat recovery systems and energy management · HSE Guidance Notes PM5 (soon to be updated) and PM60 and the SAFed publication PSG2

Delegates will learn about:

· · · · · · · · · · · Steam fundamentals and benefits Installation Classifications of steam and high purity water Distribution practices Water treatment Condensate handling Generation technology Key applications Standards Steam quality testing and validation Materials of construction

Objectives

To give an understanding of the wet-side of the boiler and to outline trends in the management and control of boiler plant in order to achieve high levels of efficiency and safety with smooth operation. To introduce boiler operators to the equipment, daily/ weekly testing and safe, efficient best practise.

Objectives

To provide knowledge of all aspects of clean steam, pure steam and associated water quality including quality critical aspects of design, operation, maintenance and validation.

Duration

2 days

Duration

2 days

Dates

January 18 - 19 February 15 - 16 March 22 - 23 April 19 - 20 May 17 - 18 June 30 - July 1 September 20 - 21 October 13 - 14 November 17 - 18 December 13 - 14

Dates

April 11 - 12 September 28 - 29 This course starts at 9:00am on the first day and finishes at 4:30pm on the second day.

The course starts at 9:00am on the first day and finishes at 4:00pm on the second day. This course may also be undertaken as part of a BTEC Certificate (see page 2) and is a good introductory course for newly appointed boiler operators. It is also suitable for others occasionally involved with steam boiler plant (e.g. those responding to alarms).

Cost

£498 + VAT

Cost

£498 + VAT

6

D8 Boiler Plant

regulations and Guidelines

Who will benefit?

Plant engineers, factory managers, health, safety and environmental managers, project engineers, design engineers and anyone seeking an understanding of the regulations and guidelines relating to steam and steam boiler plant.

M1 Maintenance of

Steam Systems

Who will benefit?

Staff who are involved with the maintenance and installation of steam systems.

Delegates will learn about:

· The fundamentals of steam systems · Good installation practices · Maintenance of steam systems · Improving installations for fault avoidance · Fault finding through practical exercises Note: Previous experience of steam is helpful, but not essential. Students will benefit by first taking the Steam Utilisation correspondence course ­ see page 3.

Delegates will learn about:

· Uses and benefits of steam · Pressure and temperature of steam · General steam system safety · Overview of Pressure System/Pressure Equipment requirements · Selected Standards ­ boilers and water treatment · PM5, PM60 and PSG2 guidelines · BG01 (replacing PM5 and PSG2) and INDG436 (when released) · Risk assessment, competence, training and supervision

Objectives

To provide a basic knowledge of steam and condensate systems and maintenance procedures for steam traps, condensate pumps and pressure reducing valves.

Objectives

To provide a broad overview of legislation, guidance and best practice within the wet side of the boiler and in steam systems, and to help users, or potential users, understand what is expected of them.

Duration

3 days

Duration

1 day

Dates

1 1

March 1 - 2 May 5 - 6 June 1 - 3 June 27 - 29

August 31 - September 2 October 10 - 12 November 14 - 16 December 7 - 9

Dates

April 1 May 26 July 18 This course starts at 9:00am and finishes at 4:30pm. See D6 for training in boiler operation or D6A for national accreditation in the operation or management of boilers.

1

September 26 November 21

July 27 - 29 This course starts at 9:00am on the first day and finishes at 4:00pm on the third day. This course can be taken as part of a BTEC certificate ­ see page 2. These 2 day courses will not include the practical sessions.

Cost

£249 + VAT

Cost

March and May £498 + VAT June - December £747 + VAT

7

M2 Steam Plant

M3 Safety Valve

Maintenance: City & Guilds Module 13

Who will benefit?

Staff who are involved with the maintenance and installation of steam systems. The course is also suitable for delegates wishing to obtain a recognised skills qualification, and for those requiring multi-skills training to work on steam systems. Spirax Sarco is accredited by The City & Guilds of London Institute as the sole approved test centre for Module 13 ­ Steam Plant Maintenance. Delegates will take practical and written tests.

Accreditation

Who will benefit?

Staff who are involved with the sizing and selection, installation, maintenance and setting of safety valves and those needing training to work on them.

Delegates will learn about:

· The purpose of safety valves · Selection of set pressure · Factors affecting sizing · Installation of safety valves · What maintenance is permissable and how to carry this out safely

Delegates will learn about:

· The fundamentals of steam systems · Good installation practices · Fault finding through practical experience · Maintenance of steam traps, pressure reducing valves, condensate pumps and other ancillary equipment · Basic boiler house maintenance ­ feedwater treatment and burners

Objectives

To give an understanding of the importance of safety valves, their sizing, setting and installation and what work may be carried out on them, all in accordance with current legislation.

Objectives

To provide delegates with the basic knowledge and practical skills necessary to pass Module 13: Steam Plant Maintenance of the CGLI Engineering Skills 1619.

Duration

5 days

Duration

1 day

Dates

June 13 - 17 July 11 - 15 September 12 - 16 October 31 - November 4 Previous experience of steam is helpful, but not essential. Students will benefit by first taking the Steam Utilisation correspondence course ­ see page 3. This course starts at 9:00am on Monday and finishes at 3:15pm on Friday.

Dates

* April 18

October A

17

certificate of competence can be provided, if required, authorising the delegate to work on and set Spirax Sarco safety valves. A questionnaire will be supplied with confirmation of booking. This course starts at 10:00am and finishes at 3:00pm.

* The April course will be a safety valve training course. Accreditation is not available.

Cost

£1290 + VAT

Cost

April £170 + VAT October £249 + VAT

8

D6A Boiler operation Accreditation

Scheme (BoAS)

What is BOAS?

The Boiler Operation Accreditation Scheme (BOAS) provides national accreditation for industrial boiler operators and boiler plant managers. Spirax Sarco is a licensed and approved BOAS training provider. The D6A course provides training to the BOAS syllabus and includes the written examination 1. Candidates are also interviewed by a Gastec assessor during the course 2. Successful candidates may use the designatory letters "Cert IBO" (Certified Industrial Boiler Operator) or "Dip BOM" (Diploma in Boiler Plant Operation Management). Candidates from both award categories take the same course and written papers. Interviews are specific to each award. The awards are valid for five years, after which a refresher course becomes necessary 4.

Who will benefit?

This course is suitable for: · Boileroperativeswithhands-onexperience · Boilerplantmanagersandsupervisors(no hands-on experience required) Those new to the boiler house wishing to have introductory boiler training should consider the D6 course on page 6.

Delegates will learn about:

· Heat and heat transfer · Boilers and auxiliaries · Feedwater · Draught and combustion A syllabus is available on request. · Controls and instrumentation · Fuels · Safety and legal · Energy efficiency · Environmental · Operation

Objectives

· TotrainandpreparecandidatesfortheBOAS qualification. · Topromotesafetyandenergyefficiencyinthe boiler house with due regard to environmental aspects and legal requirements.

Duration

4 days

Dates

February 8 - 11 March 8 - 11 April 12 - 15 May 10 - 13 June 21 - 24 A candidate pack containing full details, a syllabus and registration form is available from Kim Mansfield, Training Co-ordinator on 01242 535211. This course starts at 9:00am on the first day and finishes around 3:00pm on the fourth day after assessment. July 19 - 22 September 6 - 9 October 18 - 21 November 22 - 25

Notes

1

The course includes the written examination papers. All candidates sit these irrespective of boiler type or award. Candidates from sites having shell boilers are interviewed during the course. Those having water tube boilers are interviewed at site. The cost is for the training course. Additional Gastec fees are payable for registration and post-course assessment. A refresher course is necessary at five yearly intervals. See D6AR (page 10) for details.

2

3

4

Cost

£995 3 + VAT

9

D6Ar Boiler operation Accreditation

Scheme (BoAS) refresher

Introduction

This course is a refresher course for boiler operators and managers/supervisors who are already accredited within the Boiler Operation Accreditation Scheme. The refresher course should be taken on the 5th anniversary of gaining the BOAS award and 5 yearly thereafter.

Duration

2 days

Who will benefit?

Qualified boiler operators and boiler plant managers/ supervisors who have taken the BOAS course and are already entitled to use the designatory letters "Cert IBO" and "Dip BOM" respectively. For new/ inexperienced boiler operators, see D6 course (page 6). For boiler operators and managers wishing to obtain a BOAS qualification, see D6A course (page 9).

Dates

April 28 - 29 May 24 - 25 July 7 - 8 August 2 - 3 September 22 - 23 October 27 - 28 November 29 - 30 December 15 - 16

The course includes the re-assessment examination and, where appropriate, an oral interview. Please see our website for further information, exact times and assessment costs ­ www.SpiraxSarco.com/uk/training or contact Kim Mansfield, Training Co-ordinator on 01242 535211.

Delegates will:

· Major on experiences since accreditation · Update on best practice · Cover new legislation/guidance notes · Refresh on the BOAS syllabus · Update on safety

Cost

£310 * + VAT * The cost is for the training course. A Gastec assessment fee will also apply.

10

E1 energy Savings

W1 water Treatment

Boosting the Bottom Line

Who will benefit?

Energy managers, plant engineers, utilities engineers, accountants, graduate engineers and others needing to manage costs, improve efficiency or reduce steam demand.

Boiler Water Treatment

Who will benefit?

Site technicians, boiler operators, supervisors, energy managers, plant engineers and maintenance engineers responsible for the day to day running of steam boilers and utility plant.

Delegates will learn about:

· Establishing the cost of steam · Saving energy in the boiler house · Optimising their steam system · Estimating the energy requirements of plant · Identifying and quantifying savings · Relating fuel savings to carbon and CO 2 · Calculating a payback period · Sources of further help and information The course majors on providing and justifying solutions rather than products and practices. Examples and case studies are used throughout.

Delegates will learn about:

· Raw water types · Fundamentals of steam · Boiler water pre-treatment systems, softeners, de-alkalisation, reverse osmosis and demineralisation · Boiler deaeration, hotwell design · Water treatment chemicals · Practical chemical dosing · Water treatment control strategies · Boiler water treatment guidelines BS 2486:1997, EN 12953.PT10 · Dealing with scale, corrosion and fouling · Improving boiler efficiency using water treatment control · Boiler water treatment testing, paper and electronic record keeping and practical control · Understanding boiler water treatments · Working with water treatment companies

Objectives

To identify opportunities for energy savings in steam systems and to provide the tools to help quantify and evaluate savings. To link energy savings to emissions and to explore ways of financing schemes and reducing the tax burden.

Objectives

To provide delegates with a practical guide to water treatment operations, chemical dosing and boiler water treatment strategies. Delegates will learn the importance of water treatment guidelines (BS & EN regulations) and be able to develop schemes to prevent scale, corrosion and fouling.

Duration

1 day

Dates

January 20 March 24 May 19 This course starts at 9:00am and finishes at 4:30pm. August 4 October 3

Duration

11/2 days

Dates

March 28 - 29 September 26 - 27 This course starts at 2:00pm on the first day and finishes at 4:30pm on the second day.

Cost

£249 + VAT

Cost

£375 + VAT

11

COM Combustion

SeM1 Seminar:

efficiency

Who will benefit?

Energy managers, boiler technicians, boiler operators, plant engineers and those responsible for boilers and combustion plant.

Metering

Who will benefit?

Energy managers, plant engineers and anyone responsible for implementing energy saving programmes.

Delegates will learn about:

· Storage and handling of fuels · Combustion principles and terminology · Handling of gaseous fuels · How to establish combustion efficiency · Gas control train · How to identify shortcomings · Properties of fuels · Making improvements, where possible · Gas flow correction

Delegates will learn about:

· Advantages and disadvantages of different types of meter · Common metering terms and their meaning · Good installation practices · Locations for effective metering · Monitoring and targeting · Effective reporting

Objectives

To give an understanding of common metering methods and practical data collection in order to effectively manage and implement energy saving programmes.

Objectives

To provide an overview of the combustion of fuels in order to achieve optimum performance and efficient operation.

Duration

1 day

Duration

1 day

Dates

January 7 May 9 September 5 This course starts at 9:00am and finishes at 4:30pm.

Dates

February 14 June 20 October 24 This course starts at 9:00am and finishes at 4:30pm.

Cost

£310 + VAT

Cost

£249 + VAT

12

OS on-site Courses

Who will benefit?

Maintenance engineers, fitters, plant engineers, boiler attendants, design engineers, etc.

Duration

To suit

Objectives & Topics

Naturally we would prefer you to visit our Cheltenham Training Centre, where a dedicated boiler plant and demonstration area is the first choice for hands-on training and demonstrations (see page 1). However, if this is not practical, perhaps due to your shift coverage or urgent requirements, then why not hold a bespoke course on-site? Most of the courses listed in this brochure can be delivered on-site (popular ones include steam boiler house overview, the D6 (page 6), introduction to steam systems and safety awareness). We can offer suggested programmes which can be customised to meet your exact needs. End of course test papers can be provided and individuals assessed if required.

Dates

Please contact us with details of your requirements. We are always happy to discuss and agree course content or we can provide typical programmes for you to customise.

Cost

Courses will be priced according to location, content and duration.

13

Additional Information

How to book

Contact the Spirax Sarco Training Co-ordinator, Kim Mansfield, who can help with queries regarding course selection, booking and availability. Kim Mansfield, Training Co-ordinator Tel: 01242 535211 Fax: 01242 535578 Email: [email protected] www.SpiraxSarco.com/uk/training

Course registration form

A course registration form is printed on page 17 of this brochure. Please photocopy and complete the form in order to book your course. A course registration form can also be found at: www.SpiraxSarco.com/uk/training. Please note that prices are per person.

Further information

Fill in the form on page 18 of this brochure, or contact our Training Co-ordinator, as above.

BTEC

Candidates wishing to take a BTEC qualification (see page 2) should initially complete the BTEC information request form on page 18. Candidates must complete the steam correspondence course prior to attending the M1 or D1 course. Similarly, they must complete the controls correspondence course prior to attending the D2 course. The D6 course also forms part of BTEC.

BOAS (D6A and D6AR Refresher course)

An additional registration form must be completed. Please ask for further details. There are also additional assessment fees.

Accommodation

A list of local hotels and guest houses is sent with confirmation of booking.

Cancellation

Cancellation will be allowed up to two weeks prior to a course, after which a 50% cancellation fee will be payable. Booked candidates who do not show will be charged a 100% cancellation fee. However, substitutions are allowed at any time.

14

Training Courses for 2011

Tu JANUARY FEBRUARY MARCH APRIL MAY JUNE JULY AUGUST SEPTEMBER OCTOBER NOVEMBER DECEMBER

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

W Th

F

Sa Su M

1 2 3

Tu

4

W Th

5 6

F

7

Sa Su M

8 9 10

Tu

11

W

12

5

6

7

8

9

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

4

5

6

7

8

9

10

11

5

6

7

8

9

10

11

12

13

14

15

1

2

3

4

5

6

7

8

9

10

11

12

13

1

2

3

4

5

6

7

8

9

10

5

6

7

8

9

10

11

12

13

14

1

2

3

4

5

6

7

8

9

10

11

12

5

6

7

8

9

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

9

10

11

12

13

14

B1 C1 D1 D2

15

­ Introduction to Steam and Condensate Systems ­ Controls and Heat Transfer Applications ­ Design of Steam and Condensate Services ­ Understanding Pressure and Temperature Control ­ Steam Boiler Plant, Controls and Systems

D6A ­ D6AR ­ D7 D8 E1 M1 ­ ­ ­ ­

COM ­ Combustion Efficiency

D6

Th

13

F

14

Sa Su M

15 16 17

Tu

18

W Th

19 20

F

21

Sa Su M

22 23 24

Tu

25

W Th

26 27

F

28

Sa Su M

29 30 31

Tu

W

17

18

19

20

21

22

23

24

25

26

27

28

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

14

15

16

17

18 19

20

21

22

23

24

25

26

27

28

29

30

31

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

15

16

17

18

19

20

21

22

23

24

25

26 27

28

29

30

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

17

18

19

20

21 22

23

24

25

26

27

28

29

30

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

Boiler Operation Accreditation Scheme Boiler Operation Accreditation Scheme Refresher Clean and Pure Steam Systems Boiler Plant Regulations and Guidelines Energy Savings: Boosting the Bottom Line Maintenance of Steam Systems

M2 M3 W1

­ Steam Plant Maintenance: City & Guilds Module 13 ­ Safety Valve Accreditation ­ Water Treatment: Boiler Water Treatment

16

SEM1 ­ Seminar: Metering

Course Registration Form

PHOTOCOPY AS REQUIRED ­ Please use a separate form per delegate for each course and tick/complete as applicable. You can also register online at www.SpiraxSarco.com/uk /training. Please check availability with the Training Co-ordinator before booking a particular course. COURSE DETAILS Course code (tick as applicable): D8 E1 M1 M2 B1 M3 C1 SEM1 COM W1 Date you wish to attend: Job title: D1 D2 D6 D6A D6AR D7

Course title: Delegate name:

For BTEC candidates (applies only to D1, D2, D6 and M1) I'd like to take the above course as part of a BTEC qualification This is my first BTEC course at Spirax Sarco (see page 2 for courses forming part of BTEC) For BOAS candidates (applies to D6A and D6AR only) Operators award New candidate Boiler types: COMPANY DETAILS Company name: Address: Invoice Address: Shell Managers award Refresher candidate Water tube Other (details) Operators and Managers award

Postcode Contact name: Contact phone no. Email address: PAYMENT Please invoice us after the course. Our purchase order no./authorisation is: Please debit my Mastercard in the name of: Please debit my Visa card in the name of: Card no: Signed: Credit/debit card billing address: Postcode: Card security code:

(3 digit number on back of card on signature strip)

Postcode Job title: Contact fax no.

Expires:

ON COMPLETION: Please send the completed form to: Kim Mansfield, Training Co-ordinator, Spirax-Sarco Limited, Charlton House, Cheltenham, Gloucestershire GL53 8ER or fax the completed form to: 01242 535578

Your details will be held on a database and we may wish to send you information about Spirax Sarco training courses at a later date. Please tick this box if you do not wish to receive such information Spirax Sarco will not pass your details on to any other party. Magazine (please specify): Mailing Repeat booking Web Email Where did you hear about Spirax Sarco training? Spirax Sarco newsletter Word of mouth Exhibition Other

17

Information Request Form

PHOTOCOPY AS REQUIRED ­ This form should only be completed if you wish to receive further information. Please tick/complete as applicable.

BTEC information (see page 2)

Please send me: The Operation and Maintenance of Steam Systems - Level 2 Design of Steam Systems - Level 3

BOAS information (see page 9 for D6A and page 10 for D6AR)

Please send me a: New candidate pack Refresher candidate pack

Other information

Please contact me regarding: On-site courses Please send the following correspondence courses (see page 3): Automatic controls Steam utilisation Hot water heating COMPANY DETAILS Company name: Address: Invoice Address:

Postcode Contact name: Contact phone no. Email address: Address for information if different from above (e.g. home) Job title: Contact fax no.

Postcode

Postcode: Email address: Contact phone no. ON COMPLETION: Please send the completed form to: Kim Mansfield, Training Co-ordinator, Spirax-Sarco Limited, Charlton House, Cheltenham, Gloucestershire GL53 8ER or fax the completed form to: 01242 535578

Your details will be held on a database and we may wish to send you information about Spirax Sarco training courses at a later date. Please tick this box if you do not wish to receive such information Where did you hear about Spirax Sarco training? Spirax Sarco newsletter Word of mouth Exhibition Other Spirax Sarco will not pass your details on to any other party. Magazine (please specify): Mailing Repeat booking Web Email

18 14

You're in good company

Here is a small selection of organisations that continue to use our top class training services: Acetate Products Airbags International Allied Bakeries AstraZenenca Cadbury Trebor Bassett Coca-Cola Corus Strip Products Del Monte Foods Ferrero Island Ford Motor Company, Dagenham Georgia Pacific GlaxoSmithKline Hammersmith Hospital HMP & YOI Guys Marsh Imperial Tobacco Kohler Mira Masterfoods Medical Research Council Northumbrian Water Palace of Westminster Pfizer Rank Hovis Rolls-Royce Power Engineering Roxel UK Rocket Motors Royal Holloway University of London Smith & Nephew St George's Hospital, London St Joseph's Hospital, Newport Swallowfield Plc The Wrigley Company Unilever Bestfoods Unilever UK Foods United Utilities Wyeth Labs

w

.S ww

pira

xSa

om / r c o .c

u k / tr a

in in g

Spirax Sarco Training Centre boiler

The Training Centre Spirax-Sarco Limited Cheltenham UK GL53 8ER t: 01242 535211 f: 01242 535578 e: [email protected] www.SpiraxSarco.com /uk

UK-TCB11

UK Issue 1

© Copyright 2010 Spirax Sarco is a registered trademark of Spirax-Sarco Limited

Information

24 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

426212