Read ANSI-B16.9-elbow.pdf text version

Buttweld Fittings

90° and 45° Long Radius Elbows - ANSI B16.9

Nominal Pipe Size

Dimensions (based on ASME/ANSI B16.9) and example weights for long radius elbows Common 90° Elbow 45° Elbow OD at Bevel Dimension Dimension 40S/STD1 40S/STD1

/2 3/ 4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48

1

in 0.84 1.05 1.32 1.66 1.90 2.38 2.88 3.50 4.00 4.50 5.56 6.62 8.62 10.75 12.75 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00

mm 21 27 33 42 48 60 73 89 102 114 141 168 219 273 324 356 406 457 508 559 610 660 711 762 813 864 914 965 1016 1067 1118 1168 1219

in 1.50 1.50 1.50 1.88 2.25 3.00 3.75 4.50 5.25 6.00 7.50 9.00 12.00 15.00 18.00 21.00 24.00 27.00 30.00 33.00 36.00 39.00 42.00 45.00 48.00 51.00 54.00 57.00 60.00 63.00 66.00 69.00 72.00

mm 38 38 38 48 57 76 95 114 133 152 190 229 305 381 457 533 610 686 762 838 914 991 1067 1143 1219 1295 1372 1448 1524 1600 1676 1753 1829

kg/piece 0.08 0.10 0.15 0.25 0.36 0.65 1.29 2.02 2.83 3.84 6.51 10.1 20.3 36.0 53.0 68.0 89.2 113.0 140.0 170.0 202.0 241.4 279.9 321.3 365.6 462.7 571.3 629.8 -

in 0.62 0.75 0.88 1.00 1.12 1.38 1.75 2.00 2.25 2.50 3.12 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 13.50 15.00 16.00 17.25 18.50 19.75 21.00 22.25 23.62 24.88 26.00 27.38 28.62 29.88

mm 16 19 22 25 29 35 44 51 57 64 79 95 127 159 190 222 254 286 318 343 381 406 438 470 502 533 565 600 632 660 695 727 759

kg/piece 0.04 0.05 0.07 0.12 0.18 0.32 0.64 1.01 1.41 1.92 3.25 5.05 10.15 18.0 26.5 34.0 44.6 56.5 70.0 85.0 101.0 120.5 140.0 160.5 183.0 231.0 285.5 315.0 -

Notes Dimensions quoted in mm are `Nominal' values from B16.9 (i.e. rounded equivalents of the inch dimensions). Refer to ASME/ANSI B16.9 for additional `Max' and `Min' metric dimensions. For tolerances see page 6-2. 1 Weights are approximate and based on manufacturers' data (where available) for Schedule 40S/Standard fittings. See page 6-6 for further information.

E-mail: [email protected] 250101 0086-317-2169777 Aalco Tel. 01932 250100 Fax: Tel(Fax): E-mail: [email protected]

6-7

Buttweld Fittings

180° Long Radius Returns - ANSI B16.9

Nominal Pipe Size

Dimensions (based on ASME/ANSI B16.9) and example weights for long radius returns Common 180° Return OD at Bevel Dimension Dimension

40S/STD1

/2 3 1 /4 1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 22 24 26-48

1

in 0.84 1.05 1.32 1.66 1.90 2.38 2.88 3.50 4.00 4.50 5.56 6.62 8.62 10.75 12.75 14.00 16.00 18.00 20.00 22.00 24.00

mm in mm in mm 21 3.00 76 1.88 48 27 3.00 76 2.00 51 33 3.00 76 2.19 56 42 3.75 95 2.75 70 48 4.50 114 3.25 83 60 6.00 152 4.19 106 73 7.50 191 5.19 132 89 9.00 229 6.25 159 102 10.50 267 7.25 184 114 12.00 305 8.25 210 141 15.00 381 10.31 262 168 18.00 457 12.31 313 219 24.00 610 16.31 414 273 30.00 762 20.38 518 324 36.00 914 24.38 619 356 42.00 1067 28.00 711 406 48.00 1219 32.00 813 457 54.00 1372 36.00 914 508 60.00 1524 40.00 1016 559 66.00 1676 44.00 1118 610 72.00 1829 48.00 1219 Long radius returns are not specified for these pipe sizes

kg/piece 0.16 0.20 0.30 0.50 0.72 1.30 2.58 4.04 5.66 7.68 13.02 20.02 40.6 72.0 106.0 136.0 178.4 226.0 280.0 340.0 404.0

Notes For NPS 3/4 the fitting may be furnished with the following dimensions: B = 2.25 in (57 mm nominal) C = 1.69 in (43 mm nominal) Dimension A = One half of dimension B Dimensions quoted in mm are `Nominal' values from B16.9 (i.e. rounded equivalents of the inch dimensions). Refer to B16.9 for additional `Max' and `Min' metric dimensions. For tolerances see page 6-2. 1 Weights are approximate and based on manufacturers' data (where available) for Schedule 40S/Standard fittings. See page 6-6 for further information.

6-8

Aalco [email protected] E-mail: [email protected] E-mail: 01932 250100 Fax: 01932 Tel(Fax): 0086-317-2169777

Buttweld Fittings

Short Radius Elbows and Returns - ANSI B16.28

Dimensions (based on ASME/ANSI B16.28) and example weights for short radius elbows and returns Common 90° Elbow 180° Return Nominal Pipe Size OD Dimension 40S/STD1 Dimension Dimension 40S/STD1

1 11/4 11/2 2 21/2 3 31/2 4 5 6 8 10 12 14 16 18 20 22 24 26 - 48

in 1.32 1.66 1.90 2.38 2.88 3.50 4.00 4.50 5.56 6.62 8.62 10.75 12.75 14.00 16.00 18.00 20.00 22.00 24.00

mm 33 42 48 60 73 89 102 114 141 168 219 273 324 356 406 457 508 559 610

in mm kg/piece in mm in 1.00 25 0.12 2.00 51 1.62 1.25 32 0.20 2.50 64 2.06 1.50 38 0.29 3.00 76 2.44 2.00 51 0.51 4.00 102 3.19 2.50 64 1.02 5.00 127 3.94 3.00 76 1.50 6.00 152 4.75 3.50 89 2.06 7.00 178 5.50 4.00 102 3.12 8.00 203 6.25 5.00 127 5.28 10.00 254 7.75 6.00 152 7.94 12.00 305 9.31 8.00 203 17.1 16.00 406 12.31 10.00 254 28.6 20.00 508 15.38 12.00 305 36.3 24.00 610 18.38 14.00 356 45.8 28.00 711 21.00 16.00 406 59.4 32.00 813 24.00 18.00 457 79.4 36.00 914 27.00 20.00 508 97.5 40.00 1016 30.00 22.00 559 44.00 1118 33.00 24.00 610 137 48.00 1219 36.00 Short radius returns are not specified for these pipe sizes

mm 41 52 62 81 100 121 140 159 197 237 313 391 467 533 610 686 762 838 914

kg/piece 0.24 0.40 0.48 1.02 2.04 3.00 4.12 6.24 10.6 15.9 35.5 57.2 72.6 91.6 118.8 158.8 195 274

Notes Dimension A = One half of dimension B Dimensions quoted in mm are `Nominal' values from B16.28 (i.e. rounded equivalents of the inch dimensions). Refer to B16.28 for additional `Max' and `Min' metric dimensions. For tolerances see page 6-2. 1 Weights are approximate and based on manufacturers' data (where available) for Schedule 40S/Standard fittings. See page 6-6 for further information.

Aalco Tel. 01932 250100 Fax: 01932 Tel(Fax): 0086-317-2169777 E-mailÿ^ [email protected] 250101 E-mail: [email protected]

6-9

Information

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1045


You might also be interested in

BETA
DAEWOO_HEAVY_DUTY_TRUCKS.doc
06butfit.doc
AT Engin 350-E 05-02
06butfit.doc