Read Microsoft Word - Stainless Splashbacks Brochure text version

[email protected] www.Stainless.Splashbacks.com.au

About Stainless Splashbacks

Stainless Splashbacks has been created for Australian home owners, investors, businesses, architects and builders for the supply of decorative, architectural stainless steel sheets. Our stainless sheets are available in custom sizes and bulk orders. We deliver Australia wide. All stainless splashbacks come with a plastic protective coating on the pattern side to protect from scratching and marking until installed. Stainless splashbacks can be installed directly onto gyprock or over existing tiles, and can be installed with construction adhesive. Stainless steel is ideal for a variety of applications, not only because it is heat and water resistant, but because it is practical and durable. The stylish, contemporary look of stainless steel has moved beyond a passing trend and has become a mainstream style. Our decorative designs are innovative and unique and guaranteed to please.

Examples of Possible Uses:

Kitchen splashback BBQ splashback & cladding Wall cladding Table & benchtops Planter tubs Column cladding Bar lining and cladding Elevator doors and panels Kickboards Foot plates Commercial servery and food processing Wet areas linings Transport Street furniture

Examples of Areas of Installation:

Kitchens Offices Shops Showrooms Hotels Clubs Bars Restaurants Airports Shopping centres

Stainless Splashbacks Styles and Specifications

`Satin Brush' style is satin brush finish in 1.5mm thickness 304 grade stainless steel. This style is available custom sized, and as a full sheet in large quantities. Full sheet size is 2400mm x 1200mm. This is the plain stainless that is very commonly used in kitchens and food preparation areas. Our fabricators can do custom cut outs for powerpoints with a laser cutter and custom sizes are cut with a guillotine. Ten or more full sheets from $278.85 EA. Twenty or more purchased discounted at a higher rate.

`Erupt' style is a 2D2 finish in 0.6mm thickness 304 grade stainless steel. Erupt has a greater 'lumper' effect than other patterns as the raised sections are a lot higher than others. Erupt has the ability to capture more light with a high reflection due to the highly raised area. Full sheet size 2438 mm x 1250 mm. Ten or more full sheets from $199.65 EA. Twenty or more purchased discounted at a higher rate.

`Mirage' style is a 2D2 finish in 0.6mm thickness 304 grade stainless steel. Mirage is a suttle decorative style with a slightly raised surface. Full sheet size 2438 mm x 1250 mm.

Ten or more full sheets from $206.25 EA. Twenty or more purchased discounted at a higher rate.

1

[email protected] www.Stainless.Splashbacks.com.au

`Diamond' style is a 2D2 finish in 0.6mm thickness 304 grade stainless steel. Diamond is a suttle decorative style with a slightly raised surface. The individual diamonds are approx 6mm in length from diamond base to top. Full sheet size 2438 mm x 1250 mm.

Ten or more full sheets from $206.25 EA. Twenty or more purchased discounted at a higher rate.

`Chessboard' is a 2D2 finish in 0.6mm thickness 304 grade stainless steel. Chessboard is a suttle decorative style, which is bold also because of its graphical nature. The individual squares are approximately 10mm in length and height. Full sheet size 2438 mm x 1250 mm. Ten or more full sheets from $206.25 EA. Twenty or more purchased discounted at a higher rate.

`Retro' style is a 2D2 finish in 0.6 thickness 304 grade stainless steel. Retro is a suttle decorative style which is bold because of its graphical nature. The individual circles are approximately 50mm from end to end on the furthest edge. Full sheet size 2438 mm x 1250 mm. Ten or more full sheets from $206.25 EA. Twenty or more purchased discounted at a higher rate.

`Checks' style is a 2D2 finish in 0.6mm thickness 304 grade stainless steel. Checks is a suttle decorative style. Every between square appears indented. The individual squares are approximately 3mm in length and height. Full sheet size 2438 mm x 1250 mm. Ten or more full sheets from $206.25 EA. Twenty or more purchased discounted at a higher rate.

`Ripple' style is a satin finish in .61mm thickness 304 grade stainless steel. Ripple is a suttle decorative style with small wavy indentations which capture more light with a high reflection. Full sheet size 2438 mm x 1250 mm.

Ten or more full sheets from $229.35 EA. Twenty or more purchased discounted at a higher rate.

`Speckle' is a 2D2 finish in 0.61mm thickness 304 grade stainless steel. Speckle has small raised circles which capture high amount of light and is very reflective. Each individual circle is approximately 2mm in size. Full sheet size 2438 mm x 915 mm.

Ten or more full sheets from $184.80 EA. Twenty or more purchased discounted at a higher rate.

`Vogue' is a 2D2 finish in 0.61mm thickness 304 grade stainless steel. Vogue has raised and indented straight lines which are bold and reflective. Each line is approximately 0.15mm in width. Full sheet size 2438 mm x 1219 mm.

Ten or more full sheets from $343.20 EA. Twenty or more purchased discounted at a higher rate.

2

[email protected] www.Stainless.Splashbacks.com.au

`Mirror' style is a mirror finish in 0.8mm thickness 304 grade stainless steel. Mirror is highly reflective same as a glass mirror. The stainless steel 'Mirror' style is very cost effective and highly durable compared to the glass mirror alternative. As this product won't shatter, it is fantastic for usage in public venues. Full sheet size 2400mm x 1200mm. Ten or more full sheets from $300.30 EA. Twenty or more purchased discounted at a higher rate.

`Quilted' style is a satin finish in .55mm thickness 304 grade stainless steel. Quilted has a large pattern of diamonds measuring approximately 115mm in height and width. The quilted pattern is indented and does not had a flat backing so needs stronger methods of application on surfaces. Full sheet size 2400 mm x 1200 mm. Ten or more full sheets from $280.28 EA. Twenty or more purchased discounted at a higher rate.

`Checkerplate' style is a satin finish in 0.55mm thickness 304 grade stainless steel. Checkerplate is a commonly used pattern for a variety of uses. The indentations capture more light with a high reflection. Full sheet size 2400 mm x 1200 mm.

Ten or more full sheets from $229.20 EA. Twenty or more purchased discounted at a higher rate.

`Treadplate' style is a satin finish in .55 thickness 304 grade stainless steel. Treadplate is a commonly used pattern (similar to checkerplate.) The indentations capture more light with a high reflection. Full sheet size 2400 mm x 1200 mm.

Ten or more full sheets from $229.20 EA. Twenty or more purchased discounted at a higher rate.

`Erupt Stainless Powdercoat' style is a 2D2 finish in 0.6mm thickness 304 grade stainless steel. Erupt has a greater 'lumpier' effect than other patterns as the raised sections are a lot higher than others. Erupt has the ability to capture more light with a high reflection due to the highly raised area. Full sheet size 2438 mm x 1250 mm. This has been powdercoated and linished on the reverse side to bring back the natural stainless colour on the raised surface. Each Sheet from $299 EA.

3

Information

Microsoft Word - Stainless Splashbacks Brochure

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1154263


You might also be interested in

BETA
stdSpecs
461-462 Stock Making Tools (2)P