Read Dec 08 Update.pub text version

ISSN 1177-5874

CONTENTS

Christmas Message 2 2 2 3 4 5 6 6 6 7 7 9 11 17 18 23

January 2008 February 2008 March 2008 April 2008 May 2008 June 2008 July 2008 August 2008 September 2008 October 2008 November 2008 December 2008

December 2008

Upcoming Standards Building Business Consumer safety Electrical Engineering Fuels Local government Telecommunications and radio Standards in development Australian Standards British Standards IEC Standards ISO Standards Current Drafts for Comment

Standards Update

Compiled by Craig Radford December 2008

Christmas message

On behalf of the Standards Council and the Standards New Zealand team, I wish you a very Merry Christmas and Happy New Year. Thank you for your custom and support this year. We look forward to being of service to you again in the New Year. We will be closed for business from 12 noon on Tuesday, 23 December 2008 and will reopen again at 8.30am on Monday 5 January 2009. If you are planning to place on order on 23 December for same day delivery, please place your order with our customer services team no later than 11.00am that morning, by contacting them on 0800 782 632. During the close down period you can place orders via our web shop (www.standards.co.nz) - these orders will be processed on Monday 5 January. If you require assistance from the national Standards body during the close down period please contact Shona Weller, General Manager Customer Services and Sales, on 027 224 3005. Best wishes for the festive season Debbie Chin Chief Executive

Upcoming new Standards

NZS 4219:2008 NZS 8135:2008 AS/NZS 3102:2002 Amendment 2 AS/NZS 61000.3.2:2007 Amendment A Specification for seismic resistance of engineering systems in buildings Non-therapeutic use of human tissue Approval and test specification - Electric duct heaters Electromagnetic compatibility (EMC) - Part 3.2 - Limits for harmonic current emissions (equipment input current <16 A per phase)

Building ­ including plumbing, gas and building services

Revision to NZS 3404:1997 Steel structures Standard Standards New Zealand is undertaking a review of NZS 3404:1997 Steel structures Standard. The revision, which is sponsored by the Department of Building and Housing, will update NZS 3404 in line with current technologies and practices, and the joint Australian/New Zealand Standard on structural design actions (AS/NZS 1170). Through feedback from the key stakeholders, the steel structures committee (P3404) has identified the need to separate the document into seven interrelated parts. This split will result in a more widely used and useful Standard to the different user groups within the industry. The documents that will make up the steel structures suite include: NZS 3404.1 Steel structures ­ Materials, fabrication, and construction NZS 3404.2 Steel structures ­ Structural analysis NZS 3404.3 Steel structures ­ General design of members and connections NZS 3404.4 Steel structures ­ Design of composite members NZS 3404.5 Steel structures ­ Design for fire NZS 3404.6 Steel structures ­ Design for fatigue NZS 3404.7 Steel structures ­ Design for earthquakes. Part 1 (Materials, fabrication, and construction) has been released for public comment for a 9-week period from 20 November 2008. Please see Draft Standards for comment below.

TO PURCHASE STANDARDS:

Click on the Standard you wish to purchase to be taken straight to the relevant page of our web shop. Alternatively, please contact Customer Services by phone on 0800 735 656, fax (04) 498 5994, email [email protected], or post your order to:

Freepost 1573, Standards New Zealand, Private Bag 2439, Wellington 6020.

Prices are current at the date this Update first appears on our web site, but are subject to change. Please check before sending payment.

2

Standards Update December 2008

New publication

NZS 4211:2008 Specification for performance of windows $69.95+GST (Members), $87.44+GST (Retail) Hardcopy $62.96+GST (Members), $78.70+GST (Retail) PDF Specifies requirements for the performance of windows to be installed in exterior walls within the wind pressure limitations of the wind zones defined in table 5 and table 6. The properties covered are strength, stiffness, operating facility, air infiltration, and water penetration. This Standard specifically excludes skylights or roof windows, interior windows, fixed louvres, the weathertightness of the window perimeter in the external wall or facade, the fire rating, building facades, and durability. Supersedes NZS 4211:1985

New amendments

Amendment 1 to AS/NZS 2032:2006 Installation of PVC pipe systems Applies to Tables 6.2 and 7.1. Amendment 1 to AS/NZS 2033:2008 Installation of polyethylene pipe systems Applies to Table 3.2.

Standard withdrawn

NZS 4211:1985 Specification for performance of windows Superseded by NZS 4211:2008

Draft Standards for comment

Free to download from our website: www.standards.co.nz DZ 3404.1 Steel Structures ­ Part 1: Materials, fabrication, and construction Sets out minimum requirements for the selection of materials, corrosion protection systems, and the fabrication, erection and construction of steel structures. It applies to building structures, crane support girders, highway, railway and pedestrian bridges, and composite steel and concrete beams and columns. Users include architects, builders, building control authorities, building inspectors, coatings applicators, fabricators, regulators, steel distributors, steel constructors, and structural engineers. Public comment on this draft closes on 21 January 2009 Thermal insulation ­ Housing and small buildings (Previously: Energy efficiency ­ Small building envelope) Aims to align the Standard with the New Zealand Building Code Clause H1, and to improve the Standard's usability and robustness. Public comment on this draft closes on 2 February 2009 PVC-U pipes and fittings for drain, waste and vent application (Revision of AS/NZS 1260:2002) To outline minimum requirements for the manufacture and performance of PVC-U pipes and fittings for non-pressure drain, waste and vent (DWV) applications for use by manufacturers, specifiers and purchasers of such products. Public comment on this draft closes on 30 December 2008

DZ 4218

DR 08216 CP

Business ­ including management and I.T.

New publication

NZS 9401:2008 Managing flood risk - A process Standard $89.95+GST (Members), $112.44+GST (Retail) Hardcopy $80.96+GST (Members), $101.20+GST (Retail) PDF Provides an agreed best practice approach for local and central government, professionals (planners, engineers, hydrologists, scientists, risk managers, lawyers and so on), developers, utility suppliers, property owners, and communities to ensure that proper consideration is given to all aspects of flood risk when making decisions, so that over the longer term, the risk of flood damage decreases.

3

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Free to download from our website: www.standards.co.nz Or hard copy available at $29.95+GST (Members), $37.44+GST (Retail)

New amendments

Free to download from our website: www.standards.co.nz Or hard copy available at $29.95+GST (Members), $37.44+GST (Retail) (Except Amendment 1 to AS/NZS ISO 19115) Amendment 1 to AS/NZS ISO 19108:2003 Geographic information - Temporal schema Applies to the front cover, Preface, Clauses 4.1.5, 4.1.8, 4.1.9, 4.1.15, 5.2.3.2, 5.2.3.5, 5.2.3.7, 5.2.4.2, 5.3.1, 5.4.5.1 and B.1.2, Figure 8 and Tables C.1 and D.2. Geographic information - Quality evaluation procedures Applies to the front cover, Preface and Figure G.3. Geographic information - Metadata $34.95+GST (Members), $43.69+GST (Retail) Hardcopy Applies to the front cover, Preface, Clauses 3, 5.5, 6.2, 6.3.2.2 and 6.3.2.7, and Annexes A, B, E, F and I.

Amendment 1 to AS/NZS ISO 19114:2005 Amendment 1 to AS/NZS ISO 19115:2005

Draft Standard for comment

Free to download from our website: www.standards.co.nz DZ 3806 Compliance programmes AS 3806:2006 Compliance programs provides principles for the development, implementation and maintenance of effective compliance programmes within both public and private organisations. These principles are intended to help organisations identify and remedy any deficiencies in their compliance with laws, regulations and codes, and develop processes for continual improvement in this area. By adopting this Australian Standard it is intended that New Zealand users will have: · standardised guidance on the principles for developing, implementing, and maintaining effective compliance programmes · harmonisation with the compliance methods used by Australian organisations. The adopted Standard will be known as NZS/AS 3806:2006 Compliance programmes. The committee that developed this amending adoption has included some additional related documents to Appendix A that are intended to complement the use of this Standard. The committee has also proposed a new Appendix B which provides a list of organisations and bodies that would be useful to a company setting up a compliance programme. Public comment on this draft closes on 20 January 2009

Consumer safety

New publication

AS/NZS 2063:2008 Bicycle helmets $39.95+GST (Members), $49.94+GST (Retail) Hardcopy $35.96+GST (Members), $44.95+GST (Retail) PDF Specifies construction requirements and the basic performance requirements for impact energy attenuation, helmet stability, load distribution, strength and effectiveness of the retention system and its attachment points and peripheral vision clearance for lightweight protective helmets intended to mitigate the adverse effects of a blow to the head. Supersedes AS/NZS 2063:1996

New amendment

Free to download from our website: www.standards.co.nz Or hard copy available at $29.95+GST (Members), $37.44+GST (Retail) Amendment 2 to AS/NZS 2172:2003 Cots for household use - Safety requirements Amendment 2 applies to Appendix A. Note that only the version of the Standard incorporating Amendment 1 is affected.

Standards withdrawn

AS/NZS 2063:1996 NZS 5823:2001 Pedal cycle helmets Superseded by AS/NZS 2063:2008 Specification for buoyancy aids and marine safety harnesses and lines Superseded by NZS 5823:2005

Standards Update December 2008

4

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Electrical

New publications

AS/NZS 3004 Electrical installations - Marinas and recreational boats Marinas $69.95+GST (Members), $87.44+GST (Retail) Hardcopy $62.96+GST (Members), $78.70+GST (Retail) PDF Specifies requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1 000 V a.c.). Together with Part 2, supersedes AS/NZS 3004:2002 Recreational boats installations $109.95+GST (Members), $137.44+GST (Retail) Hardcopy $98.96+GST (Members), $123.70+GST (Retail) PDF Specifies requirements for electrical installations on boats with a maximum length of 50 m. Together with Part 1, supersedes AS/NZS 3004:2002 AS/NZS 3004.1:2008

AS/NZS 3004.2:2008

AS/NZS 4965

Performance of close control airconditioners Testing for rating $79.95+GST (Members), $99.94+GST (Retail) Hardcopy $71.96+GST (Members), $89.95+GST (Retail) PDF Specifies the conditions on which the capacity and energy consumption of factory-made close control airconditioners are based and the test methods to be applied to determine the capacity and efficiency ratings. This Standard covers equipment utilizing a single or multiple refrigerated direct expansion (DX) system designed to control and monitor temperature and humidity and may include supplementary conditioning equipment. Minimum energy performance standard (MEPS) requirements $59.95+GST (Members), $74.94+GST (Retail) Hardcopy $53.96+GST (Members), $67.45+GST (Retail) PDF Specifies the minimum energy performance standard (MEPS) requirements for close control airconditioners that fall in the scope of AS/NZS 4965.1. It does not specify electrical safety requirements but does specify the following values for cooling, as applicable: rated power (input), rated capacity (output), energy efficiency ratio (EERS) for cooling, and minimum energy performance standard requirements.

AS/NZS 4965.1:2008

AS/NZS 4965.2:2008

AS/NZS 62087

Power consumption of audio, video and related equipment Minimum energy performance standards (MEPS) requirements for digital television set-top boxes $69.95+GST (Members), $87.44+GST (Retail) Hardcopy $62.96+GST (Members), $78.70+GST (Retail) PDF Provides designers, manufacturers, importers, test laboratories, regulators and users of digital television set-top boxes with the minimum energy performance standards (MEPS) requirements for these devices.

AS/NZS 62087.2.1:2008

New amendments

Free to download from our website: www.standards.co.nz Or hard copy available at $29.95+GST (Members), $37.44+GST (Retail) AS/NZS 1158.3 Road lighting - Pedestrian area (Category P) lighting Performance and design requirements Applies to Clauses 2.3.1 and 2.6, Table 2.6 and Table 2.10. Amendment 1 to AS/NZS 1158.3.1:2005 AS/NZS 3350

Safety of household and similar electrical appliances Particular requirements - Stationary cooking ranges, hobs, ovens and similar appliances Will be published on 12 December 2008 Applies to Preface, Annex ZA and Annex ZZ.

Amendment 1 to AS/NZS 3350.2.6:2006

AS/NZS 60335

Household and similar electrical appliances Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Will be published on 12 December 2008 Applies to Foreword, Annex ZA and Annex ZZ.

Standards Update December 2008

Amendment 1 to AS/NZS 60335.2.6:2008

5

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Standard withdrawn

AS/NZS 3004:2002 Electrical installations - Marinas and pleasure craft at low-voltage Superseded by AS/NZS 3004.1:2008 and AS/NZS 3004.2:2008

Engineering

New publications

AS/NZS 4776 Liquid-chilling packages using the vapour compression cycle Method of rating and testing for performance ­ Rating $34.95+GST (Members), $43.69+GST (Retail) Hardcopy $31.46+GST (Members), $39.32+GST (Retail) PDF Prescribes the method of rating liquid-chilling packages using the vapour compression cycle to determine the capacity, power and efficiency of equipment under a specific set of conditions. It is not the intent of this Standard to provide for testing in-field installations, where steady-state and uniform conditions are difficult to achieve and provisions for measurements are not made. Method of rating and testing for performance ­ Testing $44.95+GST (Members), $56.19+GST (Retail) Hardcopy $40.46+GST (Members), $50.57+GST (Retail) PDF Prescribes the method of testing liquid-chilling packages using the vapour compression cycle to determine the capacity, power and efficiency of equipment under a specific set of conditions. It is not the intent of this Standard to provide for testing in-field installations, where steady-state and uniform conditions are difficult to achieve and provisions for measurements are not made. AS/NZS 4776.1.1:2008

AS/NZS 4776.1.2:2008

Fuels

NZS 5262:2003 Gas appliance safety You are invited to submit suggestions for changes to NZS 5262:2003 Gas appliance safety. The Standard was published in 2003 and is about to be reviewed as part of the annual work programme for the gas safety Standards. Standards New Zealand, in conjunction with the New Zealand Gas Sector Board (NZGSB), would welcome user feedback. (The NZGSB exists to allow effective communication between Standards New Zealand and industry, regulators and other sector groups, and to allow these groups to have high level strategic input into Standards development issues.) The aim of this project is to update the Standard to coincide with the amendment to the Gas Regulations, which are expected to be published in mid 2009. While the changes to the regulations have not been confirmed, the NZGSB and Standards New Zealand have approved the review on the basis that the Regulator has agreed in principle to cite the updated NZS 5262. This invitation offers the greater gas appliance community an opportunity to put forward ideas to be considered by the committee responsible for an update of the Standard. You will have further opportunity to comment when the proposed changes are made available for review during an 8 week public comment period next year. Suggestions could include the following: · Listing specific improvements and their technical basis. · Editorial inconsistencies: Please advise specific example(s) including the clause, table or figure number. Please send comments by 3 December 2008 to Vicki Allison, Project Manager at Standards New Zealand, email address: [email protected]

Local Government

New publication

NZS 9401:2008 Managing flood risk - A process Standard $89.95+GST (Members), $112.44+GST (Retail) Hardcopy $80.96+GST (Members), $101.20+GST (Retail) PDF Provides an agreed best practice approach for local and central government, professionals (planners, engineers, hydrologists, scientists, risk managers, lawyers and so on), developers, utility suppliers, property owners, and communities to ensure that proper consideration is given to all aspects of flood risk when making decisions, so that over the longer term, the risk of flood damage decreases.

Standards Update December 2008

6

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Telecommunications and radio

SKY Television has recently released an updated commercial installation specification which is based on AS/NZS1367:2007. Please contact SKY Television for a copy of their specification by emailing [email protected] AS/NZS1367:2007 Coaxial cable and optical fibre systems or the RF distribution of analog and digital television and sound signals in single and multiple dwelling installations is available for order or download from the Standards New Zealand website.

Standards in development

Timber framed buildings Committee: P3604 Project Manager: Mani Taare Estimated Publication Date: 2010 Comments: In the process of forming the leadership group and constitution of the P3604 Technical Committee. Revision of NZS 3122:1995 and NZS 3123:1974 Committee: P3122-3123 Project Manager: Mani Taare Estimated Publication Date: August 2009 Comments: A project for the amendment of NZS 3122:1995 Specification for Portland and blended cements (General and special purpose) and revision of NZS 3123:1974 Specification for Portland pozzolan cement (type PP cement) is getting under way and is presently in the early stages of nominating and forming the technical committee. Specification - Seismic performance of engineering systems in buildings Committee: P4219 Project Manager: Stuart Ng Estimated Publication Date: December 2008 Comments: The committee are finalising the draft Standard before ballot occurs and then publication. The Standard is expected to be published December 2008. Code of Practice for concrete structures for the storage of liquids Committee: P3106 Phase 2 Project Manager: Hagen Kerr Estimated Publication Date: June 2009 Comments: Draft being prepared for release to Public Comment in December. Thermal insulation ­ Housing and small buildings (Previously: Energy efficiency ­ Small building envelope) Committee: P4218 Project Manager: Sonia van Ree Estimated Publication Date: June 2009 Comments: The public comment draft is now open for comment and closes on 2 February 2009. Revision of NZS3404 Steel Structures - Phases 1, 2 & 3 Committee: P3404 Project Manager: Jono East Estimated Publication Date: June 2009 (NZS 3404.1 only) Comments: Committee meeting was held in November and the committee have agreed to release Part 1 for public comment. Committee commencing scoping work and revision of Parts 2 to 6. Segmental concrete pavers Committee: P3116 Project Manager: Hagen Kerr Estimated Publication Date: March 2009 Comments: Work on the amendment is required before publication. Review of domestic wastewater systems Committee: WS-013 Project Manager: Jono East Estimated Publication Date: February 2009 Comments: A revision of the Standards relating to on-site domestic wastewater treatment is near completion. The committee is revising AS/NZS1547 draft in light of issues resulting from ballot.

7

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Building ­ including plumbing, gas and building services

Environment

Acoustics - Road traffic noise - New and altered roads Committee: P6806 Project Manager: Stuart Ng Estimated Publication Date: March 2009 Comments: The draft Standard is being finalised before the public comment period commences. Public comment is expected to commence in early December 2008 and remain open until February 2009. Acoustics - Assessment and measurement of sound from wind turbines Committee: P6808 Project Manager: Bruce Taylor Estimated Publication Date: October 2009 Comments: A review of the current standard NZS 6808 is under way. The committee held its fourth meeting on 4 December 2008. The committee has agreed on the framework for the revised draft Standard, and its content is now being developed in preparation for release of a draft for public comment in early 2009.

Fire protection

Fire hydrant systems for buildings Committee: P4510 Project Manager: Vicki Allison Estimated Publication Date: February 2009 Comments: The scope for the revision of NZS 4510:2008 has changed to include an amendment to the recently published edition. The amendment includes a review of clause 3.2.1, which currently contradicts the open path length requirements of Table 3.3 of Compliance Document C to the Building Code. Amendment 1 to NZS 4510:2008 will result in the Standard being able to be cited as an acceptable solution to Clause C. Public comment for the draft amendment closed on 25 November 2008. The next stage is for the committee to review the feedback and finalise the draft for publication.

Fuels

Gas appliance safety Committee: P5262 Project Manager: Vicki Allison Estimated Publication Date: October 2009 Comments: The purpose of this project is to review NZS 5262:2003 in line with the updates to the gas regulations, and any other safety developments since the last revision. The scope of the project will be set by the committee at the first committee meeting. The committee is currently being constituted.

Health

Non-therapeutic use of human tissue Committee: P8135 Project Manager: Nelson Procter Estimated Publication Date: Mid to late December 2008 Comments: The final committee draft is in preparation, due the first week of December.

Management

Compliance programs adoption Committee: P3806 Project Manager: Vicki Allison Estimated Publication Date: April 2009 Comments: AS 3806 provides principles for the development, implementation and maintenance of effective compliance programmes within both public and private organisations. The purpose of this project is to adopt the Standard for use in New Zealand. The draft adoption is now at public comment and feedback on the changes is sought by 20 January 2008.

Telecommunications and radio

Electromagnetic compatibility limit Committee: AS/NZS61000 Project Manager: John Kelly Estimated Publication Date: Late December 2008 Comments: Development of a New Zealand only amendment to AS/NZS 61000.3.2:2007 to limit the allowable harmonic currents for integrated compact fluorescent lamps (CFLs) with power input between 11 and 25 watts.

8

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Australian Standards

AS 1038 Coal and coke - Analysis and testing Higher rank coal and coke - Relative density - Analysis sample/density bottle method $44.89+GST (Members), $56.11+GST (Retail) Sets out a method for the determination of the relative density of higher rank coal and coke by a relative density bottle method. Supersedes AS 1038.21.1.1-2002 AS 1038.21.1.1-2008

AS 1289

Methods of testing soils for engineering purposes - Soil classification tests Determination of the linear shrinkage of a soil - Standard method $34.09+GST (Members), $42.61+GST (Retail) Supersedes AS 1289.3.4.1-1995

AS 1289.3.4.1-2008

AS 1418

Cranes, hoists and winches Special purpose appliances $126.70+GST (Members), $158.38+GST (Retail) Specifies requirements, additional to those in AS 1418.1, for special purpose appliances including platform hoists, tip truck hoisting systems, earthmoving equipment used as a crane, and side-boom pipelayers. Application, design, controls, performance, components, testing, marking, operation and maintenance are covered. Appendices provide guidance on information to be supplied with enquiry, order, tender or request for hire, commissioning, inspecting and operation, and use of platform hoists. Supersedes AS 1418.8-2002

AS 1418.8-2008

AS 1767

Insulating liquids Test methods - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity $106.25+GST (Members), $132.81+GST (Retail) Adopts IEC 60814, Ed. 2 (1997) to specify methods of determination the dielectric dissipation factor (tan (), relative permittivity and d.c. resistivity of single phase, insulating liquid materials at the test temperature. The methods are primarily intended for making reference tests on unused liquids but can also be applied to liquids in service in transformers, cables and other electrical apparatus. Simplified procedures are also included for routine testing. Test methods - Determination of water in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration $106.25+GST (Members), $132.81+GST (Retail) Adopts IEC 60814, Ed. 2.0 to specify methods of determining the water content in insulating liquids and in oil-impregnated cellulosic paper and pressboard insulation using coulometrically generated Karl Fischer reagent.

AS 1767.2.2-2008

AS 1767.2.8-2008

AS 2140-2008

Jewellery - Fineness of precious metal alloys $62.50+GST (Members), $78.13+GST (Retail) Specifies the composition and marking requirements of articles made from precious metals and the marking requirements for mixed metal articles. Supersedes AS 2140-1978 and AS 2141-1978 Requirements for rolled gold and plated jewellery $44.89+GST (Members), $56.11+GST (Retail) Specifies composition and marking requirements for rolled gold and plated jewellery. Supersedes AS 2335-1980 Polyethylene sleeving for ductile iron piping $62.50+GST (Members), $78.13+GST (Retail) Specifies requirements for materials for loose polyethylene sleeving intended for the corrosion protection of buried ductile iron pipeline systems. Supersedes AS 3680-1989 Application of polyethylene sleeving for ductile iron piping $62.50+GST (Members), $78.13+GST (Retail) Specifies requirements for the application of loose polyethylene sleeving intended for the corrosion protection of buried ductile iron pipeline systems. Supersedes AS 3681-1989

AS 2335-2008

AS 3680-2008

AS 3681-2008

9

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

AS 4180

Measurement of drift loss from cooling towers Chloride balance method $62.50+GST (Members), $78.13+GST (Retail) Sets out the requirements for measuring the drift of circulating water into the atmosphere by a chloride ion mass balance on the water circuit, under laboratory conditions. Supersedes AS 4180.1-1994 Lost chloride method $62.50+GST (Members), $78.13+GST (Retail) Sets out the requirements for measuring the drift of circulating water into the atmosphere by observing the mass of chloride ions missing from the water circuit under controlled conditions.

AS 4180.1-2008

AS 4180.2-2008

HB 233-2008

Superseded Standards

AS 1038 Coal and coke - Analysis and testing Higher rank coal and coke - Relative density - Analysis sample/density bottle method Superseded by AS 1038.21.1.1-2008 AS 1038.21.1.1-2002

AS 1289

Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil Standard method Superseded by AS 1289.3.4.1-2008

AS 1289.3.4.1-1995

AS 1418

Cranes, hoists and winches Special purpose appliances Superseded by AS 1418.8-2008

AS 1418.8-2002

AS 2140-1978 AS 2141-1978 AS 2335-1980 AS 3680-1989 AS 3681-1989 AS 4180

Composition and marking requirements of gold articles Superseded by AS 2140-2008 Composition and marking requirements of silver articles Superseded by AS 2140-2008 Rolled gold, gold-plated and silver-plated jewellery - Composition and marking Superseded by AS 2335-2008 Polyethylene sleeving for ductile iron piping Superseded by AS 3680-2008 Guidelines for the application of polyethylene sleeving to ductile iron pipelines and fittings Superseded by AS 3681-2008 Drift loss from cooling towers - Laboratory measurement Chloride balance method Superseded by AS 4180.1-2008

AS 4180.1-1994

Withdrawn Standard

AS 2891.6-1993 Methods of sampling and testing asphalt - Determination of stability by the modified Hubbard-Field procedure

10

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Fire Protection Systems Testing - Water Conservation Handbook $89.20+GST (Members), $111.50+GST (Retail)

BRITISH STANDARDS

The following British Standard publications are available from Customer Services (see 'To Purchase Standards' on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section. BS 969:2008 BS 5266-10:2008 BS 8493:2008 BS 31100:2008 Specification for limits and tolerances on plain limit gauges Supersedes BS 969:1982 Guide to the design and provision of emergency lighting to reduce the risks from hazards in the event of failure of the normal lighting supply Light reflectance value (LRV) of a surface. Method of test Risk management. Code of practice

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). Note: The date referenced in the identifier is the date of the European standard. BS EN 589:2008 BS EN ISO 648:2008 BS EN 725-3:2007 Automotive fuels. LPG. Requirements and test methods Supersedes BS EN 589:2004 Laboratory glassware. Single-volume pipettes Supersedes BS 1583:1986 Advanced technical ceramics. Methods of test for ceramic powders. Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas Supersedes BS EN 725-3:1994 Paints and varnishes. Coating materials and coating systems for exterior wood Performance specification Supersedes DD ENV 927-2:2000 Natural weathering test Supersedes BS EN 927-3:2000 Assessment of the liquid water permeability Supersedes BS EN 927-5:2000 Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water Chemicals used for treatment of water intended for human consumption. Calcium carbonate Supersedes BS EN 1018:1998 Chemicals used for treatment of water intended for human consumption. Sulfur dioxide Supersedes BS EN 1019:1996 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System X. Dimensions Supersedes BS EN 1124-3:1999 Impact attenuating playground surfacing. Determination of critical fall height Supersedes BS EN 1177:1998 which remains current Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery Supersedes BS EN 1301-1:1997 Mechanical properties Supersedes BS EN 1301-2:1997 Tolerances on dimensions Supersedes BS EN 1301-3:1997 Flanges and their joints. Design rules for gasketed circular flange connections. Gasket parameters Supersedes DD ENV 1591-2:2001

Standards Update December 2008

BS EN 927

BS EN 927-2:2006 BS EN 927-3:2006 BS EN 927-5:2006 BS EN 927-6:2006 BS EN 1018:2006

BS EN 1019:2005 BS EN 1124-3:2008

BS EN 1177:2008 BS EN 1301

BS EN 1301-1:2008 BS EN 1301-2:2008 BS EN 1301-3:2008 BS EN 1591-2:2008

11

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

BS EN 1715

Aluminium and aluminium alloys. Drawing stock General requirements and technical conditions for inspection and delivery Supersedes BS EN 1715-1:1998 Specific requirements for welding applications Supersedes BS EN 1715-4:1998 Acoustics. Measurement of room acoustic parameters. Reverberation time in ordinary rooms Partially supersedes BS EN ISO 3382:2000 Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gaschromatographic method Supersedes BS EN ISO 6401:2004

BS EN 1715-1:2008 BS EN 1715-4:2008 BS EN ISO 3382-2:2008

BS EN ISO 6401:2008

BS EN 12273:2008 BS EN 12409:2008 BS EN 12808

Slurry surfacing. Requirements Plastics and rubber machines. Thermoforming machines. Safety requirements Supersedes BS EN 12409:1999 Grouts for tiles Determination of chemical resistance of reaction resin mortars Supersedes BS EN 12808-1:1999 Determination of resistance to abrasion Supersedes BS EN 12808-2:2002 Determination of flexural and compressive strength Supersedes BS EN 12808-3:2002 Determination of water absorption Supersedes BS EN 12808-5:2002 Conveyor belts for general purpose use. Electrical and flammability safety requirements Supersedes BS EN 12882:2002 Products used for treatment of water intended for human consumption. Manganese greensand Supersedes BS EN 12911:1999 Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum Supersedes BS EN 13348:2001 Communication systems for meters and remote reading of meters. Local Bus Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method Supersedes BS EN ISO 13789:1999 Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification Supersedes BS EN 13957:2003 Aluminium and aluminium alloys. Cold drawn, round, coiled tube for general applications. Specification Supersedes BS EN 13958:2003 Thermal insulation products for buildings. Insitu thermal insulation formed from exfoliated vermiculite (EV) products. Specification for the installed products Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for IG01 extinguishant Supersedes BS ISO 14520-12:2005 Physical properties and system design of gas extinguishing systems for IG100 extinguishant Supersedes BS ISO 14520-13:2005

BS EN 12808-1:2008 BS EN 12808-2:2008 BS EN 12808-3:2008 BS EN 12808-5:2008 BS EN 12882:2008 BS EN 12911:2006

BS EN 13348:2008 BS EN 13757-6:2008 BS EN ISO 13789:2007

BS EN 13957:2008

BS EN 13958:2008

BS EN 14317-2:2007 BS EN 15004

BS EN 15004-7:2008

BS EN 15004-8:2008

12

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

BS EN ISO 11890-1:2007

Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method Supersedes BS EN ISO 11890-1:2001

BS EN 15004-9:2008

Physical properties and system design of gas extinguishing systems for IG55 extinguishant Supersedes BS ISO 14520-14:2005 Physical properties and system design of gas extinguishing systems for IG541 extinguishant Supersedes BS ISO 14520-15:2005 Safety of machinery. Safety requirements for hot flat rolling mills Safety of machinery. Safety requirements for cold flat rolling mills Inland navigation vessels. Equipment for rope leading. Roller fairleads Fugitive and diffuse emissions of common concern to industry sectors. Measurement of fugitive emission of vapours generating from equipment and piping leaks Hardware for furniture. Strength and durability of hinges and their components. Hinges pivoting on a vertical axis Energy performance of buildings. Overall energy use and definition of energy ratings Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants Supersedes BS EN 12563:1999 Active implantable medical devices. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) Supersedes BS 6902-1:1990 and BS 6902-1:Supplement No. 1:1996 Power transformers. Reactors Supersedes BS EN 60289:1995 which remains current Measuring relays and protection equipment. Electrical disturbance tests. Radiated electromagnetic field immunity Supersedes BS EN 60255-22-3:2001 Specifications for particular types of winding wires. General requirements. Enamelled round copper wire Supersedes BS EN 60317-0-1:1998 Automatic electrical controls for household and similar use. Particular requirements for automatic electrical pressure sensing controls including mechanical requirements Supersedes BS EN 60730-2-6:1995 which remains current Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torque strength of coupling mechanism Supersedes BS EN 61300-2-15:1997 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type MPO connector family Supersedes BS EN 61754-7:2005 Energy management system application program interface (EMS-API). CIM based graphics exchange

BS EN 15004-10:2008

BS EN 15093:2008 BS EN 15094:2008 BS EN 15272-3:2007 BS EN 15446:2008 BS EN 15570:2008 BS EN 15603:2008 BS EN 15688:2008 BS EN ISO 21535:2007

BS EN 45502-2-2:2008

BS EN 60076-6:2008 BS EN 60255-22-3:2008

BS EN 60317-0-1:2008

BS EN 60730-2-6:2008

BS EN 61300-2-15:2008

BS EN 61754-7:2008

BS EN 61970-453:2008 BS EN 61996

Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Voyage data recorder (VDR). Performance requirements, methods of testing and required test results Supersedes BS EN 61996:2001 Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results Supersedes BS EN 61996-2:2006 LED modules for general lighting. Safety specifications

BS EN 61996-1:2008

BS EN 61996-2:2008

BS EN 62031:2008

13

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 124:2008 BS ISO 1170:2008 BS ISO 4126-9:2008 BS ISO 4411:2008 BS ISO 5667-17:2008 BS ISO 6535:2008 BS ISO 7146 Latex, rubber. Determination of total solids content Supersedes BS 6057-3.2:1997 Coal and coke. Calculation of analyses to different bases Safety devices for protection against excessive pressure. Application and installation of safety devices excluding stand-alone bursting disc safety devices Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics Water quality. Sampling. Guidance on sampling of bulk suspended solids Supersedes BS ISO 5667-17:2000 Portable chain-saws. Chain brake performance Supersedes BS 6916-5:1988 Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings General Cavitation erosion and its countermeasures Representation of results of particle size analysis. Descriptive and quantitative representation of particle shape and morphology Metallic and other inorganic coatings. Postcoating treatments of iron or steel to reduce the risk of hydrogen embrittlement Supersedes BS ISO 9588:1999 Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in deflected condition Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle Supersedes BS ISO 11500:1997 Identification cards. Optical memory cards. Linear recording method Optical properties and characteristics Supersedes BS ISO/IEC 11694-3:2001 Logical data structures Supersedes BS ISO/IEC 11694-4:2001

BS ISO 7146-1:2008 BS ISO 7146-2:2008 BS ISO 9276-6:2008 BS ISO 9588:2007

BS ISO 10129:2006 BS ISO 10952:2008

BS ISO 11500:2008

BS ISO/IEC 11694

BS ISO/IEC 11694-3:2008 BS ISO/IEC 11694-4:2008 BS ISO 12745:2008 BS ISO 14717:2008 BS ISO 15112:2007 BS ISO 15970:2008 BS ISO 16212:2008 BS ISO 18938:2008 BS ISO 21009-1:2008 BS ISO 22493:2008

14

Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.] Natural gas. Energy determination Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor Cosmetics. Microbiology. Enumeration of yeast and mould Imaging materials. Optical discs. Care and handling for extended storage Cryogenic vessels. Static vacuum-insulated vessels. Design, fabrication, inspection and tests Microbeam analysis. Scanning electron microscopy. Vocabulary

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

BS ISO 23380:2008 BS ISO 26322-1:2008 BS ISO 29470:2008 BS IEC 60870-5-6:2006

Selection methods for the determination of trace elements in coal Tractors for agriculture and forestry. Safety. Standard tractors Thermal insulating products for building applications. Determination of the apparent density Telecontrol equipment and systems. Guidelines for conformance testing for the IEC 60870-5 companion standards

PUBLICLY AVAILABLE SPECIFICATIONS

Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

PAS 220:2008

Prerequisite programmes on food safety for food manufacturing

AMENDMENTS TO BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and amendments to British Standards were made available last month. BS 4211:2005+A1:2008 BS EN 1916:2002 BS EN 1917:2002 BS EN ISO 10081-3:2005 Specification for permanently fixed ladders AMENDMENT 1 Concrete pipes and fittings, unreinforced, steel fibre and reinforced CORRIGENDUM 1 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced CORRIGENDUM 3 Classification of dense shaped refractory products. Basic products containing from 7% to 50% residual carbon CORRIGENDUM 2 Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D CORRIGENDUM 1 Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A CORRIGENDUM 1

BS EN 13959:2004 BS EN 14451:2005

BRITISH STANDARD DECLARED OBSOLESCENT

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life. BS 697:1986 Specification for rubber gloves for electrical purposes This standard has been declared obsolescent as it is no longer relevant. It is superseded by BS EN 60903:1993 Lifts and service lifts. Specification for the testing and inspection of electric and hydraulic lifts This standard has been declared obsolescent as it is superseded by BS 84861:2007 and BS 8486-2:2007, which has replaced BS 5655-10.1.1:1995 and BS 565510.2.1:1995 Specification for solid glass beads for use with road marking compounds and for other industrial uses Structural use of concrete Code of practice for design and construction Code of practice for special circumstances Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns

Standards Update December 2008

BS 5655-10:1986

BS 6088:1981 BS 8110

BS 8110-1:1997 BS 8110-2:1985 BS 8110-3:1985

15

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

PAS 67:2008

Laboratory tests to determine the heating and electrical performance of heat-led microcogeneration packages primarily intended for heating dwellings

BS EN 60601-1-3:1995

(BS 5724-1.3:1995) Medical electrical equipment. General requirements for safety. Collateral standard. General requirements for radiation protection in diagnostic Xray equipment This standard has been declared obsolescent as it is superseded by BS EN 606011-3:2008 and will be withdrawn on publication of the revised BS EN 60601-2 series Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)

BS HC 404:1977

BRITISH STANDARDS WITHDRAWN

BS 598 Sampling and examination of bituminous mixtures for roads and other paved areas BS 598-100:2004 BS 598-101:2004 BS 598-102:2003 BS 598-104:2005 BS 598-107:2004 BS 1583:1986 DD 213:1993 BS 6057-3.2:1997 BS 6282 Methods for sampling for analysis Methods for preparatory treatments of samples for analysis Analytical test methods Methods of test for the determination of density and compaction Method of test for the determination of the composition of design surface course rolled asphalt Specification for one-mark pipettes Superseded by BS EN ISO 648:2008 Method for determination of the indirect tensile stiffness modulus of bituminous mixtures Rubber lattices. Methods of test. Determination of total solids content of rubber latices Superseded by BS ISO 124:2008 Devices with moving parts for the prevention of contamination of water by backflow Specification for check valves of nominal size up to and including DN 54 Superseded by BS EN 13959:2004 Specification for terminal anti-vacuum valves of nominal size up to and including DN 54 Superseded by BS EN 14451:2005 Specification for combined check and antivacuum valves of nominal size up to and including DN 42 Superseded by BS EN 14451:2005

BS 6282-1:1982 BS 6282-2:1982

BS 6282-4:1982

BS 6902

Cardiac pacemakers Specification for implantable cardiac pacemakers Superseded by BS EN 45502-2-1:2003 and BS EN 45502-2-2:2008

BS 6902-1:1990

BS 6902-1:Supp. No. 1:1996 Specification for implantable cardiac pacemakers. Electromagnetic compatibility Superseded by BS EN 45502-2-1:2003 and BS EN 45502-2-2:2008 BS 6916-5:1988 BS 7412:2002 Chain saws. Methods of evaluating chain brake performance Superseded by BS ISO 6535:2008 Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification Superseded by BS 7412:2007 Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon Superseded by BS EN ISO 10081-3:2005 Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants Superseded by BS EN ISO 21535:2007 Safety requirements for electronic flash apparatus for photographic purposes Superseded by BS EN 60065:2002

BS EN 12475-3:1998

BS EN 12563:1999

BS EN 60491:1997

16

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

BS EN 60730

Specification for automatic electrical controls for household and similar use. Particular requirements Automatic electrical burner control systems Superseded by BS EN 60730-2-5:2002 Electrically operated water valves, including mechanical requirements Superseded by BS EN 60730-2-8:2002 Temperature sensing controls Superseded by BS EN 60730-2-9:2002

BS EN 60730-2-5:1995 BS EN 60730-2-8:1995 BS EN 60730-2-9:1995 BS EN 61810

Electromechanical non-specified time all-or nothing relays General requirements Superseded by BS EN 61810-1:2004

BS EN 61810-1:1999 BS EN 61810-5:1999 BS ISO 14520

Gaseous fire-extinguishing systems. Physical properties and system design IG-01 extinguishant Superseded by BS EN 15004-7:2008 IG-100 extinguishant Superseded by BS EN 15004-8:2008 IG-55 extinguishant Superseded by BS EN 15004-9:2008 IG-541 extinguishant Superseded by BS EN 15004-10:2008

BS ISO 14520-12:2005 BS ISO 14520-13:2005 BS ISO 14520-14:2005 BS ISO 14520-15:2005

IEC PUBLICATIONS

The following IEC publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel IEC 60034-30:2008 IEC/TS 60815 Rotating electrical machines. Efficiency classes of single-speed three-phase cage induction motors Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Definitions, information and general principles Ceramic and glass insulators for A.C. systems Polymer insulators for A.C. systems

IEC/TS 60815-1:2008 IEC/TS 60815-2:2008 IEC/TS 60815-3:2008 IEC 60853

Calculation of cyclic and emergency current rating of cables Cyclic rating factor for cables up to and including 18/30 (36) kV AMENDMENT 2:October 2008 Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages AMENDMENT 1:October 2008

IEC 60853-1:1985 IEC 60853-2:1989

IEC 61000

Electromagnetic compatibility (EMC). Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields

IEC 61000-4-6:2008 (Ed. 3)

EC 61000-4-30:2008 (Ed. 2) Power quality measurement methods IEC 61606-3:2008 IEC 62059-31:2008 IEC/TS 62239:2008 (Ed. 2) IEC 80601 Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics. Professional use Electricity metering equipment (A.C.). Dependability. Accelerated reliability testing. Elevated temperature and humidity Process management for avionics. Preparation of an electronic components management plan

Medical electrical equipment Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening

Standards Update December 2008

IEC 80601-2-58:2008 IEC 80601-2-59:2008

17

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Insulation coordination Superseded by BS EN 61810-1:2004

IEC CISPR 15:2005

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment AMENDMENT 2:October 2008

IEC CISPR 16-2-1:2008 (Ed. 2) Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements

ISO PUBLICATIONS

The following ISO publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel ISO 445:2008 (Ed. 3) ISO 589:2008 (Ed. 4) ISO 1750:1981 ISO 2320:2008 (Ed. 4) ISO 2470-2:2008 ISO 2575:2004 ISO 2898-2:2008 (Ed. 4) ISO 3767-2:2008 (Ed. 3) Pallets for materials handling. Vocabulary

Pesticides and other agrochemicals. Common names AMENDMENT 5:November 2008 Prevailing torque type steel nuts. Mechanical and performance properties Paper, board and pulps. Measurement of diffuse blue reflectance factor. Outdoor daylight conditions (D65 brightness) Road vehicles. Symbols for controls, indicators and tell-tales AMENDMENT 3:October 2008 Plastics. Plasticized poly (vinyl chloride)(PVC-P) moulding and extrusion materials. Preparation of test specimens and determination of properties Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural tractors and machinery

ISO 4254

Agricultural machinery. Safety Combine harvesters, forage harvesters and cotton harvesters Seed drills

ISO 4254-7:2008 (Ed. 2) ISO 4254-9:2008 (Ed. 2) ISO 4373:2008 (Ed. 3) ISO 4666-2:2008 (Ed. 2) ISO 4706:2008 ISO 5492:2008 (Ed. 2) ISO 6292:2008 (Ed. 2) ISO 7176-10:2008 (Ed. 2) ISO 7240-28:2008

Hydrometry. Water level measuring devices Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Rotary flexometer Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below Sensory analysis. Vocabulary Powered industrial trucks and tractors. Brake performance and component strength Wheelchairs. Determination of obstacle-climbing ability of electrically powered wheelchairs Fire detection and alarm systems. Fire protection control equipment Identification cards. Machine readable travel documents. Machine readable passport

ISO/IEC 7501-1:2008 (CD-ROM) (Ed. 5) ISO 7573:2008 (Ed. 2) ISO 8362

Technical product documentation. Parts lists Injection containers and accessories Closures for injection vials Freeze drying closures for injection vials

ISO 8362-2:2008 (Ed. 2) ISO 8362-5:2008 (Ed. 2) ISO 8406:2008 (Ed. 3)

Tools for moulding. Mould bases. Round locating elements and spacers

ISO/IEC 9075:2008 (CD-ROM) Information technology. Database languages. SQL This CD contains Parts 1-4, 9-11, 13 and 14 of ISO/IEC 9075.

18 Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Hard coal. Determination of total moisture

ISO 9697:2008 (Ed. 2) ISO 9895:2008 (Ed. 2) ISO 10303

Water quality. Measurement of gross beta activity in non-saline water. Thick source method Paper and board. Compressive strength. Shortspan test Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Quality of product shape data

ISO 10303-59:2008

ISO/TS 10303-1052:2007 (CD-ROM) (Ed. 2) Application module. Default tolerance ISO 10407-2:2008 Petroleum and natural gas industries. Rotary drilling equipment. Inspection and classification of used drill stem elements

ISO 10907-1:2008 (Ed. 2) ISO 10993-7:2008 (Ed. 2) ISO 11612:2008 (Ed. 2) ISO/IEC 11695

Tools for moulding. Locating rings. Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) Biological evaluation of medical devices. Ethylene oxide sterilization residuals Protective clothing. Clothing to protect against heat and flame

Identification cards. Optical memory cards. Holographic recording method Physical characteristics Dimensions and location of accessible optical area Optical properties and characteristics Information technology. Generic cabling for customer premises AMENDMENT 1:CORRIGENDUM 1:October 2008 Tools for pressing. Ball-lock punch retainers. Types C and D, reduced for light duty Tools for pressing. Guide pillar mountings Fuel cell road vehicles. Maximum speed measurement Hybrid-electric road vehicles. Guidelines for charge balance measurement Petroleum and natural gas industries. Steel drill pipe

ISO/IEC 11695-1:2008 ISO/IEC 11695-2:2008 ISO/IEC 11695-3:2008 ISO/IEC 11801:2002 ISO 11900-2:2008 (Ed. 2) ISO 11903:2008 (Ed. 2) ISO/TR 11954:2008 ISO/TR 11955:2008 ISO 11961:2008 (Ed. 2) ISO 12004

Metallic materials. Sheet and strip. Determination of forming-limit curves Measurement and application of forming-limit. Diagrams in the press shop Determination of forming-limit curves in laboratory Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with a vertical workholding spindle Geosynthetics. Guidelines for the assessment of durability Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions Fire safety. Vocabulary Information technology. Guideline for the evaluation and selection of CASE tools Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs

ISO 12004-1:2008 ISO 12004-2:2008 ISO 13041-2:2008 ISO/TS 13434:2008 ISO 13500:2008 (Ed. 3) ISO 13680:2008 (Ed. 2) ISO 13943:2008 (Ed. 2) ISO/IEC 14102:2008 (Ed. 2) ISO 14172:2008 (Ed. 2) ISO 14310:2008 (Ed. 2)

19

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

ISO/IEC 10646:2003 (CD-ROM) Information technology. Universal Multiple-Octet Coded Character Set (UCS) AMENDMENT 4:July 2008

ISO/IEC 14496

Information technology. Coding of audio-visual objects Conformance testing AMENDMENT 20:August 2008 AMENDMENT 26:October 2008 AMENDMENT 27:October 2008

ISO/IEC 14496-4:2004 (CD-ROM)

ISO/IEC 14496-9:2008 (CD-ROM) (Ed. 2) Reference hardware description ISO/IEC 14496-10:2008 (CD-ROM) (Ed. 4) Advanced video coding ISO/IEC 14496-12:2008 (Ed. 3) ISO 15783:2002 ISO 15784 ISO base media file format

Seal-less rotodynamic pumps. Class II. Specification AMENDMENT 1:November 2008

ISO 15784-1:2008 ISO 15784-3:2008 ISO/TR 15847:2008 ISO 16000-13:2008

General principles and documentation framework of application profiles Application profile-data exchange (AP-DATEX) Graphic technology. Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment Indoor air. Determination of total (gas and particle-phase) polychlorinated dioxinlike biphenyls (PCBs) and polychlorinated dibenzo-p-dioxidibenzofurans (PCDDs/ PCDFs). Collection on sorbent-backed filters Information technology. Automatic identification and data capture techniques. Data matrix bar code symbology specification CORRIGENDUM 1:October 2008 Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. Oilseeds and animal feeding stuffs

ISO/IEC 16022:2006

ISO 16634-1:2008

ISO 18436

Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Field lubricant analysis Acoustic emission Thermography Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity Imaging materials. Optical disc media. Storage practices Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity

ISO 18436-4:2008 ISO 18436-6:2008 ISO 18436-7:2008 ISO 18921:2008 (Ed. 2) ISO 18925:2008 (Ed. 2) ISO 18927:2008 (Ed. 2)

ISO/IEC 19776-2:2008 (Ed. 2) Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) encodings. Classic VRML encoding ISO 20283-2:2008 Mechanical vibration. Measurement of vibration on ships. Measurement of structural vibration

ISO 20712-1:2008 (CD-ROM) Water safety signs and beach safety flags. Specifications for water safety signs used in workplaces and public areas ISO 20860-1:2008 ISO 21212:2008 ISO 21213:2008 Road vehicles. 50 ohms impedance radio frequency connection system interface. Dimensions and electrical requirements Intelligent transport systems. Communications access for land mobiles (CALM). 2G Cellular systems Intelligent transport systems. Communications access for land mobiles (CALM). 3G Cellular systems

ISO/IEC 21827:2008 (Ed. 2) Information technology. Security techniques. Systems Security Engineering. Capability Maturity Model® (SSE-CMM®)

20 Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Intelligent transport systems (ITS). Data exchange involving roadside modules communication

ISO 22702:2003 (CD-ROM) ISO 22915-1:2008 ISO/IEC 23000

Utility lighters. General consumer-safety requirements AMENDMENT 1:September 2008 Industrial trucks. Verification of stability. General

Information technology. Multimedia application format (MPEG-A) Open access application format Digital Multimedia Broadcasting application format

ISO/IEC 23000-7:2008 (CD-ROM) ISO/IEC 23000-9:2008 (CD-ROM) ISO 23868:2008 ISO/TR 24156:2008 ISO 24394:2008 ISO 24538:2008 ISO/IEC 24727-4:2008 ISO/IEC 24757:2008 ISO 26424:2008 ISO 28702:2008 ISO 28722:2008 ISO 28723:2008 ISO 28762:2008 ISO 28763:2008 ISO 28764:2008 ISO/TR 29381:2008 ISO 29465:2008 ISO 29466:2008 ISO 29467:2008 ISO 29468:2008 ISO 29469:2008 ISO 29471:2008

Document management. Monitoring and verification of information stored on 130 mm optical media Guidelines for using UML notation in terminology work Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder Identification cards. Integrated circuit card programming interfaces. Application programming interface (API) administration Information technology. Keyboard interaction model. Machine-readable keyboard description Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test Rubber and plastics hoses and tubing. Textile reinforced types. Sub-ambient temperature crush test Vitreous and porcelain enamels. Characteristics of enamel coatings applied to steel panels intended for architecture Vitreous and porcelain enamels. Determination of the edge covering on enamelled steel plate to be used in heat exchangers Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications Vitreous and porcelain enamels. Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron Metallic materials. Measurement of mechanical properties by instrumented indentation test. Indentation tensile properties Thermal insulating products for building applications. Determination of length and width Thermal insulating products for building applications. Determination of thickness Thermal insulating products for building applications. Determination of squareness Thermal insulating products for building applications. Determination of flatness Thermal insulating products for building applications. Determination of compression behaviour Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23°C/50% relative humidity) Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions

ISO 29472:2008

21

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

ISO 29764:2008 ISO 29765:2008 ISO 29766:2008 ISO 29767:2008 ISO 29768:2008 ISO 29769:2008 ISO 29770:2008 ISO 29771:2008

Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces Thermal insulating products for building applications. Determination of tensile strength parallel to faces Thermal insulating products for building applications. Determination of short-term water absorption by partial immersion Thermal insulating products for building applications. Determination of linear dimensions of test specimens

Thermal insulating products for building applications Determination of thickness for floating-floor insulating products Thermal insulating materials for building applications. Determination of organic content

22

Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Thermal insulating products for building applications. Determination of behaviour under point load

DRAFT STANDARDS AVAILABLE FOR PUBLIC COMMENT

New Zealand Draft Standards

Number DZ 3806 DZ 4218 Closing date Subject Steel Structures ­ Part 1: Materials, fabrication, and construction Thermal insulation ­ Housing and small DZ 3404.1 v2 21 January 2009 2 February 2009

20 January 2009 Compliance programmes

Joint Australia/New Zealand Draft Standards

Number Closing date Subject DR 08183 CP 8 December 2008 Vehicles, boats and internal combustion engines ­ Radio disturbance characteristics ­ Limits and methods of measurement for the protection of off-board receivers (Revision of AS/NZS CISPR 12:2006) DR 08184 CP 8 December 2008 Electromagnetic compatibility ­ Requirements for household appliances, electrical tools and similar apparatus, Part 1: Emission DR 08216 CP 30 December 2008 PVC-U pipes and fittings for drain, waste and vent application DR 08222 16 December 2008 Amendment 2 to AS/NZS 2040.1:2005 Performance of household electrical appliances - Clothes washing machines - Part 1: Methods for measuring performance, energy and water consumption Amendment No. 2 to AS/NZS 60335.2.5:2002 Household and similar electrical appliances - Safety - Part 2.5: Particular requirements for dishwashers AS/NZS 60335.2.7:2009 Household and similar electrical appliances - Safety - Part 2.7: Particular requirements for washing machines Amendment No. 2 to AS/NZS 60335.2.8:2004 Household and similar electrical appliances - Safety - Part 2.8: Particular requirements for shavers, hair clippers and similar appliances AS/NZS 60335.2.9:2009 Household and similar electrical appliances - Safety - : Particular requirements for grills, toasters and similar portable cooking appliances Amendment No. 1 to AS/NZS 60335.2.10:2006 Household and similar electrical appliances - Safety - Part 2.10: Particular requirements for floor treatment machines and wet scrubbing machines AS/NZS 60335.2.11:2009 Household and similar electrical appliances - Safety Part 2.11: Particular requirements for tumble dryers Amendment No. 1 to AS/NZS 60335.2.12:2004 Household and similar electrical appliances - Safety - Particular requirements for warming plates and similar appliances Amendment No. 1 to AS/NZS 60335.2.14:2007 Household and similar electrical appliances - Safety - Part 2.14: Particular requirements for kitchen machines Amendment No. 4 to AS/NZS 60335.2.15:2002 Household and similar electrical appliances - Safety - Particular requirements for appliances for heating liquids Amendment No. 1 to AS/NZS 60335.2.16:2006 Household and similar electrical appliances - Safety - Part 2.16: Particular requirements for food waste disposers Amendment No. 2 to AS/NZS 60335.2.17:2004 Household and similar electrical appliances - Safety - Part 2.17: Particular requirements for blankets, pads and similar flexible heating devices Amendment No. 1 to AS/NZS 60335.2.26:2006 Household and similar electrical appliances - Safety - Part 2.26: Particular requirements for clocks Amendment No. 1 to AS/NZS 60335.2.28:2006 Household and similar electrical appliances - Safety - Part 2.28: Particular requirements for sewing machines Amendment No. 2 to AS/NZS 60335.2.43:2005 Household and similar electrical appliances - Safety - Particular requirements for clothes dryers and towel rails Amendment No. 1 to AS/NZS 60335.2.44:2006 Household and similar electrical appliances - Safety - Part 2.44: Particular requirements for ironers Amendment No. 1 to AS/NZS 60335.2.45:2004 Household and similar electrical appliances - Safety - Part 2.45: Particular requirements for portable heating tools and similar appliances Amendment No. 1 to AS/NZS 60335.2.51:2006 Household and similar electrical appliances - Safety - Part 2.51: Particular requirements for stationary circulation pumps for heating and service water installations Amendment No. 1 to AS/NZS 60335.2.52:2006 Household and similar electrical appliances - Safety - Particular requirements for oral hygiene appliances

Standards Update December 2008

DR 08951 CP 16 December 2008 Amendment No. 1 to AS/NZS 4763(Int):2006 Safety of Portable Inverters DR 08952 CP 16 January 2009 DR 08953 CP 16 January 2009 DR 08954 CP 16 January 2009

DR 08955 CP 16 January 2009 DR 08956 CP 16 January 2009

DR 08957 CP 16 January 2009 DR 08958 CP 16 January 2009 DR 08959 CP 16 January 2009 DR 08960 CP 16 January 2009 DR 08961 CP 16 January 2009 DR 08962 CP 16 January 2009

DR 08963 CP 16 January 2009 DR 08964 CP 16 January 2009 DR 08965 CP 16 January 2009 DR 08966 CP 16 January 2009 DR 08967 CP 16 January 2009

DR 08968 CP 16 January 2009

DR 08969 CP 16 January 2009

23

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

DR 08970 CP 16 January 2009

Amendment No. 2 to AS/NZS 60335.2.55:2004 Household and similar electrical appliances - Safety - Part 2.55: Particular requirements for electrical appliances for use with aquariums and garden ponds Amendment No. 1 to AS/NZS 60335.2.56:2006 Household and similar electrical appliances - Safety - Particular requirements for projectors and similar appliances Amendment No. 1 to AS/NZS 60335.2.60:2006 Household and similar electrical appliances - Safety - Particular requirements for whirlpool baths and whirlpool spas Amendment No. 2 to AS/NZS 60335.2.61:2005 Household and similar electrical appliances - Safety - Particular requirements for thermal storage room heaters Amendment No. 1 to AS/NZS 60335.2.65:2006 Household and similar electrical appliances - Safety - Particular requirements for air-cleaning appliances Amendment No. 1 to AS/NZS 60335.2.66:2004 Household and similar electrical appliances - Safety - Part 2.66: Particular requirements for water-bed heaters

DR 08971 CP 16 January 2009 DR 08972 CP 16 January 2009 DR 08973 CP 16 January 2009 DR 08974 CP 16 January 2009 DR 08975 CP 16 January 2009 DR 08976 CP 16 January 2009

DR 08977 CP 16 January 2009 DR 08978 CP 16 January 2009 DR 08979 CP 16 January 2009 DR 08980 CP 16 January 2009 DR 08981 CP 16 January 2009

Amendment No. 2 to AS/NZS 60335.2.78:2005 Household and similar electrical appliances - Safety - Part 2.78: Particular requirements for outdoor barbeques Amendment No. 1 to AS/NZS 60335.2.80:2004 Household and similar electrical appliances - Safety - Part 2.80: Particular requirements for fans Amendment No. 1 to AS/NZS 60335.2.83:2002 Household and similar electrical appliances - Safety - Particular requirements for heated gullies for roof drainage Amendment No. 1 to AS/NZS 60335.2.85:2005 Household and similar electrical appliances - Safety - Part 2.85: Particular requirements for fabric steamers Amendment No. 1 to AS/NZS 60335.2.95:2005 Household and similar electrical appliances - Safety - Part 2.95: Particular requirements for drives for vertically moving garage doors for residential use Amendment No.1 to AS/NZS 60335.2.98:2005 Household and similar electrical appliances - Safety - Part 2.98: Particular requirements for humidifiers Amendment No. 1 to AS/NZS 60335.2.101:2002 Household and similar electrical appliances - Safety - Part 2.101: Particular requirements for vapourizers AS/NZS 60745.1:2009 Hand-held motor-operated electric tools - Safety - Part 1: General requirements AS/NZS 60745.2.1:2009, Hand-held motor-operated electric tools - Safety - Part 2.1: Particular requirements for drills and impact drills AS/NZS 60745.2.2:2009, Hand-held motor-operated electric tools - Safety - Part 2.2: Particular requirements for screwdrivers and impact wrenches AS/NZS 60745.2.4:2009, Hand-held motor-operated electric tools - Safety - Part 2.4: Particular requirements for sanders and polishers other than disk type Amendment No. 1 to AS/NZS 60745.2.5:2007 Hand-held motor-operated electric tools - Safety - Part 2.5: Particular requirements for circular saws AS/NZS 60745.2.6:2009, Hand-held motor-operated electric tools - Safety - Part 2.6: Particular requirements for hammers AS/NZS 60745.2.8:2009, Hand-held motor-operated electric tools - Safety - Part 2.8: Particular requirements for shears and nibblers AS/NZS 60745.2.9:2009, Hand-held motor-operated electric tools - Safety - Part 2.9: Particular requirements for tappers AS/NZS 60745.2.11:2009, Hand-held motor-operated electric tools - Safety - Part 2.11: Particular requirements for reciprocating saws (jig and sabre saws) AS/NZS 60745.2.12:2009, Hand-held motor-operated electric tools - Safety - Part 2.12: Particular requirements for concrete vibrators Amendment No. 1 to AS/NZS 60745.2.14:2003 Hand-held motor-operated electric tools - Safety - Part 2.14: Particular requirements for planers AS/NZS 60745.2.18:2009, Hand-held motor-operated electric tools - Safety - Part 2.18: Particular requirements for strapping tools AS/NZS 60745.2.20:2009, Hand-held motor-operated electric tools - Safety - Part 2.20: Particular requirements for band saws AS/NZS 60745.2.21:2009, Hand-held motor-operated electric tools - Safety - Part 2.21: Particular requirements for drain cleaners Amendment No. 2 to AS/NZS 60335.2.3:2002 Household and similar electrical appliances - Safety - Part 2.3: Particular requirements for electric irons

DR 08982 CP 16 January 2009 DR 08983 CP 16 January 2009 DR 08984 CP 16 January 2009 DR 08985 CP 16 January 2009 DR 08986 CP 16 January 2009 DR 08987 CP 16 January 2009 DR 08988 CP 16 January 2009 DR 08989 CP 16 January 2009 DR 08990 CP 16 January 2009 DR 08991 CP 16 January 2009 DR 08992 CP 16 January 2009 DR 08993 CP 16 January 2009 DR 08994 CP 16 January 2009 DR 08995 CP 16 January 2009 DR 08996 CP 16 January 2009 DR 08997 CP 16 January 2009 DR 08998 CP 16 January 2009

Draft Standards are free to download from our website: www.standards.co.nz

24 Standards Update December 2008

S ta n d a r d s U pd a t e D e c e m b e r 2 0 0 8

Amendment No. 1 to AS/NZS 60335.2.75:2005 Household and similar electrical appliances - Safety - Part 2.75: Particular requirements for commercial dispensing appliances and vending machines

Information

Dec 08 Update.pub

24 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

606876


You might also be interested in

BETA
untitled
T
file://C:\Gsite\mesteel\mesteel.dir\info\carbon\british_standar