Read Convertible2010.pdf text version

Convertible and Vinyl Tops Parts

www.stevescamaroparts.com

and the trunk area - top folds down Into this liner Black 060230........................................................................49.95 White for use with white tops 060240........................................................................49.95

Convertible Tops, Vinyl Convertible Tops

Include top, rear tack strip, tack strip retaining clips and screws, plastic rear window assembly and Installation instructions. These are 32oz single ply material Special orders only not in stock...can be drop shipped! 1967-69 Black CVA1 call for prices 1967-69 White CVA2 call for prices 1967-69 Plastic Rear Window Curtain Only specify top color also fits FireBird black 060140................................................................49.95 white 060150................................................................49.95 Convertible Top Accessories 1967-69 Convertible Rain Gutter 1 piece reproduction that mounts at the rear of the top well opening In the body and allows water to drain off and not get into the vehicle 060170.........................................................................169.95

1967-69 Convertible Top Pads pads are original in appearance and fit between the convertible top and the top frame on the RH and LH sides - black only 060260..........................................................................39.95 1967-69 Convertible Well Liners vinyl liner that covers the section between the rear seat

1967-69 Convertible Camaro Pinchweld Moldings, Rear Polished stainless trim molding around rear of convertible top at body line. Nicely finished end

2

Steve's Camaros

2010 Camaro Parts Catalog

Order: 800-544-4451

treatments and accurate curvature. RH and LH pair 210850.........................................................................139.95 1967-69 Convertible Top rear frame seals Seals prevent water drainage into rear of body and trunk area. Molded rubber with stamped steel spine as original. RH and LH, pair 280401.........................................................................39.95 1967-69 Convertible Top Bolts and Pivots Camaro Convertible Top bolts and Pivot Kit 280402.........................................................................49.95 1967-69 Camaro pan. This brace mounts under the body about the center of the transmission tunnel. to reduce flex in the body...often removed to put larger exhaust in....if you have oversized exhaust look at the Hotchkis X-member 060270.........................................................................89.95 1967-69

Convertible Top Weatherstrip the weatherstrip for the convertible top frame. Correct molded rubber weatherstrips to seal out water and wind noise. Mounting hardware is included 280610.........................................................................189.95 1967-69 Camaro Convertible Top Header seal Highest Quality Reproductions Available Camaro convertible top header weatherstrip kit with pin studs and cut corners 280420.........................................................................14.95

1967-69 Camaro Convertible Top

Camaro/ Firebird Convertible X Brace Support The Hotchkis Performance X brace for 67-69 F-Body cars was designed to add rigidity to the chassis by replacing the factory frame brace. As an added benefit this brace allows for the use of larger tube exhaust systems, which often requires removal of the factory brace. Fabricated from 10 gauge steel, this brace features extra reinforcing gussets, laser cut Hotchkis logo, powder coated gloss black finish and stainless mounting hardware. This is the perfect finishing touch for any Convertible restoration 255330.........................................................................189.95

1967-69 Camaro Firebird Convertible Sub Frame Connectors The Hotchkis Performance sub-frame connectors for 67-69 F-Body cars were designed to add rigidity to the chassis to improve vehicle performance by reducing chassis flex. Fabricated from 1.5"x 2.5' .120 wall rectangular steel, these TIG welded connectors come powder coated gloss black and include urethane front body mounts. Installation of these connectors does not require modifications or cutting of the floor boards. The rear mount is a weld in, while the front mount is a bolt in with the option to weld 255345.........................................................................360.00

Manual Top Hold-Down Latches 1967-1969 Holds top frame in down position. For manual tops only. 060220..................................................29.95 1967-69 Convertible Camaro Crossmember280402 Floor Brace The convertible X-member support

Info: 650-873-1890

Fax:650-873-3670

www.stevescamaroparts.com

3

Convertible Tops, Vinyl

www.stevescamaroparts.com

1967­1969 RH Convertible Outer Pillar Post Molding Trim molding on exterior front windshield pillar posts. Stainless steel as original. 210490....49.95 1967-1969 LH Convertible Outer Pillar Post Molding Trim molding on exterior front windshield pillar posts. Stainless steel as original. Protective plastic coating. 210480...........................................................................49.95 Convertible Pinchweld Molding Clip Special spring steel clips holds rear pinchweld moldings tight to body, especially when the convertible top boot is attached. Ten required per car. 210010.....................................each 4.95 1967-69 Top Frame Rubber Stoppers keeps the top frame from rubbing when folding into the well 060280....................................................................pair 8.95 1967-69 Convertible Top Hydraulic Pump/Motor Assembly Ready to install motor\pump assembly with reproduction three point mounting system and correct electrical plug end. Motor mounting pad set included, NOT a "universal" type motor that you had to modify to fit your convertible. No modifications necessary. Just slide the new pump motor in where the old one was! The hydraulic pump motor is the "heart" of your power top system 060250........................................................................259.95

1967-69 Convertible Top Tension Cables reproduction of the cable assembly that applies tension to both sides of the convertible tops to prevent flapping or flaring out of the top 060120...................................................................pair 17.95 1967-69 Convertible Top Latch Knuckles beautifully reproduced pieces that mount on the side latch assemblies of the top frame and come with roil pin - Include RH and LH assembly 060210...................................................................pair 24.95 1967-69 Convertible Top Latch Hooks used in conjunction with 060210- hooks fit into the visor mounts and keep the convertible top locked in a closed position 060180....................................................................each 5.95

1967 Convertible Header Molding Chrome Pair Polished triple chrome plating. Accurate fit reproduction in technically correct bright chrome for 1967 and most 1968. (Will fit all 67-69). RH & LH pair only. 210020..........................................................................99.95 68-69 Convertible Header Molding Satin Pair The Camaro met the then new federal safety standards reducing automotive glare areas by satin finish coating or plating formerly bright chrome parts.(RH & LH) duplicate the satin coating over chrome factory originals. (Technically correct for late 68 and all 69, will fit all 67-69) 210030.........................................................................99.95

4

Steve's Camaros

2010 Camaro Parts Catalog

Order: 800-544-4451

Power Top Motor Pad Set (3) Set of three correct rubber top motor\pump mounting pads. 065200............................................................................9.95 1967-69 convertible Top Hydraulic Cylinders Exact, original quality reproduction cylinders fit, look and function as originals. Suggested to be replaced in pairs. .......Not all cylinders are created equal.......OUR top pivot cylinders are manufactured according to the original design by forming an all metal, one piece case. This process eliminates the possibility of leaks from the lower part of the cylinder (which is a common problem with the crimped-together import cheapo type). The result is? A more reliable cylinder. On other reproduction top pivot cylinders the ports which receive the hydraulic hoses from the pump/motor are made by screwing in pre-fab external brass fittings which protrude as much as ¾s of an inch further than the originals and create clearance problems when you try to mount them in the car. NEW MADE IN THE USA!! 060160................................................................each 159.95 060200........................................................................54.95 Lower Hose 060190........................................................................54.95 67-69 Camaro Convertible Top Header Bow Stop Bumper

Correct reproduction. High density material and color as original. Packaged as pair. 065210............................................................................13.95

1967-69 Camaro Convertible Door Alignment Wedge Set correct reproduction alignment shims for all convertible doors....one kit fits both doors made in the USA 060390...............................................................................49.95 Convertible Top Boots

1967-69 Convertible Top Motor to Hydraulic Cylinder Hose reproduction lines that feed the fluid from the top motor to the hydraulic top cylinders - built using the original style burst resistant plastic line with the correct flared fittings - one feed line and one return line required per vehicle Upper Hose

These heavy vinyl top boots are backed with foam and the original type plastic Insert for mounting the boot clips. They come with snap kit needed for attaching boot to inner well covers. Boot clips not Included. 1967-69 Black 060040.....................................................................169.95 1967-69 Red 060080.....................................................................169.95 1967 Light Blue 060060.....................................................................169.95 1967 Bright Blue 060050.....................................................................169.95

Info: 650-873-1890

Fax:650-873-3670

www.stevescamaroparts.com

5

Convertible Tops, Vinyl

1969 Hugger Orange 060070......................................................................169.95 other colors avalible for order avg.2-3 weeks for manufacture

www.stevescamaroparts.com

Vinyl Tops 1967-69 Convertible Top Boot Clips reproduction clips are fastened to plastic reinforcement strip on the Inside of the top boot and fasten to the chrome molding around the rear well opening - 16 clips required per vehicle 060130.....................................................set of 16 ......44.95 Top Boot Storage Bag nice heavy vinyl bag with a snap lock for storing top boot when not in use 060010........................................................................19.95 These tops have the correct dielectric welded seams and grains as factory original. 1967-1967 Camaro 1967-69 White 060380....................................................................79.95 1967-69 Black 060370....................................................................79.95

1968-1969 Convertible 3 Pieces Rear Tack Strip Assembly Galvanized metal U-channels with embedded tack strips are first stapled to rear of top then bolted to the inner body above the rain gutter. Made in the USA. 060290.........................................................................159.95

1967-68 Vinyl Top Moldings Each molding is an exact duplicate of the original. Once installed, they will bring back the original appearance and a factory fresh look. Each stainless steel molding is stamped to perfection including a high polished chrome finish. For use on all 1967-68 Camaro's which included a factory installed vinyl top. Set includes both RH and LH moldings, and a full set of mounting clips 210860........................................................................set 99.95

6

Steve's Camaros

2010 Camaro Parts Catalog

Order: 800-544-4451

1967-68 Camaro convertible power top

switch Exact reproduction power top switch 060310...................................39.95

1969 Camaro convertible power top switch Exact reproduction power top switch 060320........................................39.95 1969 Vinyl Top Moldings Each stainless steel molding is stamped to perfection including a high polished chrome finish. For use on all 1969 Camaros which included a factory installed vinyl top. Set includes both RH and LH 4 pieces 210865.....................................................................set 129.95 1967-68 Camaro convertible power top harness 67-68 Camaro convertible power top harness. All wiring harnesses are manufactured to original GM blueprint specifications and feature the correct color coded wires, connectors and ends. Made in the USA! 091830..........................................................................50.00 1969 Camaro

1969 Camaro convertible power top switch bracket Top Switch Mounting Bracket, 1967-1968 060110.........................17.95

convertible power top harness 69 Camaro convertible power top harness. All wiring harnesses are manufactured to original GM blueprint specifications and feature the correct color coded wires, connectors and ends. Made in the USA! 091840..........................................................................50.00

Info: 650-873-1890

Fax:650-873-3670

www.stevescamaroparts.com

7

Information

7 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

107573


You might also be interested in

BETA