Read Microsoft Word - SPST2008TB.doc text version

2008 SullivanPalatek Factory Service Schools

SPST2008TB.doc

Page 1 of 6

rev 12/12/07

General Training Information

The Sullivan-Palatek factory training school schedule for 2008 is now completed and ready for you to make your reservations. The schools that have been scheduled at Sullivan-Palatek are: · · · BASIC AIR COMPRESSOR MAINTENANCE AND TECHNICAL SKILLS. INDUSTRIAL COMPRESSOR CONTROL TECHNICIAN. VARIABLE FREQUENCY DRIVE TECHNICIAN.

Class times are from 8:00 AM to 5:00 PM each day. Breakfast available at 7:30 AM

SCHOOLS ARE HELD AT THE MICHIGAN CITY HOLIDAY INN AND THE SULLIVAN-PALATEK PLANT. The training is done in a casual atmosphere that encourages class participation. It is very important to us that you learn as much as possible during your stay in Michigan City. While we do have a schedule to follow, we also want to hear from you. We welcome your field challenges and hope to assist you.

Leather shoes are Required. Sullivan-Palatek is a smoke free facilty.

Schools cover: · Safety. · Compressor installations. · Controls - pneumatic, electric, and electronic. · Lubricants, warranty, and oil sampling. · Troubleshooting. · Maintenance. · 65% Classroom 35% hands on. · Plant tour. There is a nominal charge for the training schools (see school summaries). This charge may be rebated (see school summaries). You are responsible for the cost and scheduling of your transportation, lodging, and some meals. (See travel, lodging, & meals information). All schools will include a memory stick of the material presented. Attendees are encouraged to bring their laptops for the classes. A hard copy of the material presented is available at additional cost and will not be rebated. Please mark on the registration your preference.

SPST2008TB.doc

Page 2 of 6

rev 12/12/07

SUMMARIES of 2008 SULLIVAN-PALATEK SCHOOLS

BASIC AIR COMPRESSOR MAINTENANCE AND TECHNICAL SKILLS

This three day school is designed for the new hire or salesman. It covers the basics of air compressor technologies. · Principles of operation covering reciprocating and rotary screw compressors. · Safety around a compressor. · Proper maintenance procedures. · Basic study of the reading and understanding of schematics for air/oil, control, electrical and electronic systems. · The school culminates with the basics in the setting of controls and troubleshooting.

REQUIREMENTS: NONE SCHOOL SIZE IS LIMITED TO 16 PER SESSION.

FEE: $250.00 FEE IS REBATED UPON FULL ATTENDANCE AND COMPLETION OF THE SCHOOL AND THE PURCHASE OF A COMPRESSOR (15 HP OR HIGHER), DRYER (250 OR HIGHER), A NET PARTS ORDER FOR $1000.00 PLACED AT TIME OF REGISTRATION TO THE COMPLETION OF THE SCHOOL

Training book cost is $150.00

INDUSTRIAL COMPRESSOR CONTROL TECHNICIAN

This four day school picks up where the basic air compressor maintenance and technical skills school ends. There is a short review and then on into the particulars of compressor components and system integration. Included is an in depth look into the workings and relationship of a compressor's systems. We will cover Standard, Low Pressure/Vacuum, and PK40 units; Base Load Transfer, Auto Transfer, Sequencer, Data Logger, and Microprocessor systems; and touch base on CRPs, Filters, and Dryers. Students leave with the understanding of the intricate operations of the compressor with the confidence to attack and repair any situation that may be found in the field.

REQUIREMENTS: · HAVE PASSED THE BASIC AIR COMPRESSOR MAINTENANCE AND TECHNICAL SKILLS SCHOOL OR THREE YEARS FIELD EXPERIENCE WITH COMPRESSORS IN MECHANICAL, ELECTRICAL, AND ELECTRONIC ASPECTS. · ABLE TO READ AND UNDERSTAND SCHEMATICS (AIR/OIL, CONTROL, ELECTRICAL, AND ELECTRONIC). SCHOOL SIZE IS LIMITED TO 16 PER SESSION. UPON COMPLETION OF THE SCHOOL, ATTENDEE WILL RECEIVE A CERTIFICATE.

FEE: $300.00 FEE IS REBATED UPON FULL ATTENDANCE AND COMPLETION OF THE SCHOOL AND THE PURCHASE OF A COMPRESSOR (15 HP OR HIGHER), DRYER (250 OR HIGHER), A NET PARTS ORDER FOR $1000.00 PLACED AT TIME OF REGISTRATION TO THE COMPLETION OF THE SCHOOL

Training book cost is $225.00 SPST2008TB.doc Page 3 of 6 rev 12/12/07

VARIABLE FREQUENCY DRIVE TECHNICIAN

This one day school will cover the principles of the frequency drive compressor, alarms, troubleshooting, schematics, and the importance of setting the unit to the system. Students leave with the understanding of the intricate operations of the VFD compressor with the confidence to attack and repair any situation that may be found in the field.

RECOMMENDED REQUIREMENTS: · HAVE PASSED THE INDUSTRIAL COMPRESSOR CONTROL TECHNICIAN SCHOOL . · ABLE TO READ AND UNDERSTAND SCHEMATICS (AIR/OIL, CONTROL, ELECTRICAL, AND ELECTRONIC). SCHOOL SIZE IS LIMITED TO 16 PER SESSION. UPON COMPLETION OF THE SCHOOL, ATTENDEE WILL RECEIVE A CERTIFICATE.

FEE: $200.00 FEE IS REBATED UPON FULL ATTENDANCE AND COMPLETION OF THE SCHOOL AND THE PURCHASE OF A COMPRESSOR (15 HP OR HIGHER), DRYER (250 OR HIGHER), A NET PARTS ORDER FOR $1000.00 PLACED AT TIME OF REGISTRATION TO THE COMPLETION OF THE SCHOOL .

Training book cost is $75.00

SULLIVAN-PALATEK 2008 SCHOOL SCHEDULE

DUE TO THE CONSTRUCTION OF OUR NEW FACILITY AND THE TIME TABLE IN MOVING OUR EXISTING PLANT, ALONG WITH THE CONSOLIDATION OF OUR CLAREMONT OPERATIONS, INTO THIS NEW FACILITY ONLY ONE SET OF SCHOOLS ARE SCHEDULED. MARCH 3 ­ 5 APRIL 7 ­ 10 APRIL 11 BASIC AIR COMPRESSOR MAINTENANCE AND TECHNICAL SKILLS. INDUSTRIAL COMPRESSOR CONTROL TECHNICIAN. VARIABLE FREQUENCY DRIVE TECHNICIAN.

SCHOOLS ARE BOOKED ON A FIRST COME BASIS. IN THE EVENT THAT A SCHOOL YOU REGISTER FOR IS FULL, YOU WILL BE ADVISED OF THE NEXT AVAILABLE SCHOOL.

NOTE: A MINIMUM OF 10 ATTENDEES ARE REQUIRED IN ORDER TO HOLD THE SCHOOL. IF LESS THAN 10 ATTENDEES ARE REGISTERED TWO WEEKS PRIOR TO THE SCHEDULED FIRST DAY OF THE SCHOOL, YOU WILL BE NOTIFIED OF THE CANCELLATION AND GIVEN THE OPPORTUNITY TO RE-SCHEDULE TO A LATER SCHOOL. CANCELLATIONS: SHOULD AN ATTENDEE NEED TO CANCEL, A $75.OO CANCELLATION FEE WILL BE DEDUCTED FROM CREDIT. NO SHOW: A NO SHOW WILL NOT GET CREDIT BACK FOR COST OF

SCHOOL.

SPST2008TB.doc

Page 4 of 6

rev 12/12/07

TRAVEL, LODGING, & MEALS

Travel: Michigan City is located in Northwest Indiana off Interstate Highway I94. The nearest airports are located in South Bend, IN, about 45 minutes east, Midway in south Chicago about 2 hours west, and O'Hare in western Chicago about 3 hours west of Michigan City

Remember that South Bend is one (1) hour ahead of Michigan City time!

Plan your travel arrangements to allow you to be at the Michigan City Holiday Inn at 8:00 A.M. on the first day of school and to leave the Michigan City Holiday Inn the last day of school at 4:00 PM.

Coach USA bus service is available between the Midway, O'Hare, and South Bend airports and Michigan City Holiday Inn. Go to www.coachusa.com for schedule and to purchase tickets. Bus from South Bend is via Highland then to Michigan City. If you use this service please stay at the Holiday Inn. As always, we will ensure that someone is available to transport attendees (without a rental car or own transportation) between the classroom and the plant/dinners. Rental car agency phone numbers are: Avis 1-800-331-1212 Budget 1-800-527-0700 Hertz 1-800-654-3131 National 1-800-227-7368 Enterprise 1-800-261-7331 Alamo 1-800-462-5266

Lodging: Several nice hotels/motels are located in Michigan City, near the

classroom site. When making reservations advise that you are with SullivanPalatek, special rates may apply (local numbers).

Holiday Inn Comfort Inn Red Roof Inn Hampton Inn

219-879-0311 219-879-9190 219-874-5251 219-879-9994 Dollar Inn Knights Inn Super 8 219-879-1364 219-878-8100 219-879-0411

A block of rooms will be set aside for Sullivan-Palatek's attendees until three weeks prior of the scheduled class date.

Meals: Sullivan-Palatek will provide a Continental breakfast and lunch for

each school day. Dinner on the Monday and Tuesday nights will also be provided by Sullivan-Palatek. All other expenses will be the responsibility of the attendees. PLEASE inform Sullivan-Palatek of any SPECIAL DIETARY REQUIREMENTS.

Guests: Should you have someone accompany you, not attending the school,

Sullivan-Palatek would like to know, to ensure that they enjoy themselves during your attendance of the school.

SPST2008TB.doc Page 5 of 6 rev 12/12/07

2008 TRAINING REGISTRATION FORM

(PHOTOCOPY AS REQUIRED)

OFFICE USE ONLY

F I N T C R

Return to: Sullivan-Palatek 3501 W Dunes Highway Michigan City, IN 46360 Fax: (219) 878-8544 Or email: [email protected] Purchase Order Number:

Student Name____________________________________________ Company Name___________________________________________ Email or fax:______________________________________________ Customer Number:

Training school(s) attending (Please mark appropriate boxes): MAR 3 - 5 BASIC AIR COMPRESSOR MAINTENANCE AND TECHNICIAN SKILLS. $250.

MEMORY STICK (INCLUDED IN FEE, MUST HAVE LAPTOP) TRAINING BOOK (ADDITIONAL $150)

APR 7 - 10

INDUSTRIAL COMPRESSOR TECHNICIAN. $300.

MEMORY STICK (INCLUDED IN FEE, MUST HAVE LAPTOP) TRAINING BOOK (ADDITIONAL $225)

APR 11

VARIABLE FREQUENCY DRIVE TECHNICIAN. $200.

MEMORY STICK (INCLUDED IN FEE, MUST HAVE LAPTOP) TRAINING BOOK (ADDITIONAL $75)

Invoice for school(s) will be processed upon receipt of this registration and will act as receipt confirmation. Any credit will be issued after school is over. Welcome letter with maps and itinerary will be sent to confirm the holding of the school.

NOTE: A MINIMUM OF 10 ATTENDEES ARE REQUIRED IN ORDER TO

HOLD A SCHOOL. IF LESS THAN 10 ATTENDEES ARE REGISTERED TWO WEEKS PRIOR TO THE SCHEDULED FIRST DAY OF THE SCHOOL, YOU WILL BE NOTIFIED OF THE CANCELLATION AND GIVEN THE OPPORTUNITY TO RE-SCHEDULE TO A LATER SCHOOL.

CANCELLATIONS: SHOULD AN ATTENDEE NEED TO CANCEL, AN

$85.OO CANCELLATION FEE WILL BE DEDUCTED FROM CREDIT.

NO SHOW: A NO SHOW WILL NOT GET CREDIT BACK FOR COST OF

COURSE.

SPST2008TB.doc

Page 6 of 6

rev 12/12/07

Information

Microsoft Word - SPST2008TB.doc

6 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

1341494