Read Microsoft Word - NordicTrack Slipping.doc text version

NORDICTRACK SKIS SLIPPING

If the leg exerciser part of your ski machine slips or skips during use, there are a few areas to check out: 1) Check the drive rollers. These should spin freely in the frontward direction and catch the shaft in the rearward direction. Classic failure is that only one ski slips or skips. If this is the case, these wear out with use so replace both because the second one will do it shortly. We can also replace the bearings in these for about ½ the cost of a new set. See our parts repair section for details on a repair. 2) Make sure the tension strap is not worn. If both skis slip or skip or if the tension strap spring chatters, it is a normal sign that the strap needs to be flipped or replaced. 3) Check for rust on the flywheel. If the channel is rusted that the tension strap rests upon, you will not be able to get the machine to work properly. Resurface the flywheel with emery cloth and clean with mineral spirits. 4) Check the underside of the skis. If you have a rubber build-up, clean the skis and then re-oil the wood so it doesn't dry out and split. If you have questions, email us at [email protected]

Copyright © 2005 by TreadmillDoctor.com, Inc. All illustrations, photographs, and scanned images, and text are the property of TreadmillDoctor.com, Inc. and may not be reused, retransmitted, copied, given, sold, or bartered to any third party. The recipient of this property is authorized to use it only in the manner expressly indicated by a staff member of TreadmillDoctor.com, Inc. All rights reserved.

Information

Microsoft Word - NordicTrack Slipping.doc

1 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

268337


You might also be interested in

BETA
Microsoft Word - NordicTrack Slipping.doc