Read http://www.mpoweruk.com/standards.htm text version

International Battery Standards

Page 1 of 10

Battery and Energy Technologies

Technologies Low Power Cells High Power Cells Chargers & Charging Battery Management Battery Testing Cell Chemistries FAQ Free Report Buying Batteries in China Choosing a Battery How to Specify Batteries Sponsors

International Standards and Testing Applicable to Batteries

"The great thing about standards is that there are so many to choose from." - Anon.

Below are listed some of the most common standards applicable to battery applications and some of the organisations who issue them and or carry out quality assurance and conformance testing. In Europe, European standards are gradually being adopted in replacement of the previous national standards. Copies of the relevant standards can be obtained directly from the issuing organisations or from public libraries. Standards and Safety Testing Organisations Published Standards General Standards Lithium Batteries Nickel Metal Hydride Batteries Nickel Cadmium Batteries Lead Acid Batteries Photovoltaic Batteries Safety Standards Automotive Batteries Aircraft Batteries Military Standards Radio Battery Standards Standby Power Systems Standards Software Standards EMC/RFI Standards Ingress Protection (IP) Standards Battery Monitoring Standards Recycling and Disposal Standards Other Related Electrical Standards Quality Standards See also the International Telecommunications Union (ITU) for the importance of standards.

Send this page to a friend

Woodbank does not monitor or record these emails

Standards Setting and Safety Testing Organisations

Abbreviation AENOR ANSI AS ASE ASQC ASTM ATEX BCI BS CARB CE Name Asociación Española de Normalización y Certificación (Spain) American National Standards Institute sponsored by NEMA Australian Standard Association Suisse des Electriciens (Swiss) American Society for Quality Control American Society for Testing and Materials Explosive Atmospheres (Safety directive) Battery Council International (Publishes Automotive Battery Standards) British Standards California Air Resources Board (Automotive Emission Standards) Conformance with EU directives

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

CEN CENELEC CISPA CODATA CSA DEF DEMKO DIN ECE EIA EN FCC FIMKO FIPA GB HSE ICSU IEC IEE IEEE IMQ IP ISO JIS KEMA KIST MIL MISRA MVEG NAMAS NEMA NEMKO NF NFPA NIJ OSHA OVE PowerNet RESNA SAE SEMKO SEV STANAG STRD TIA TR TÜV UKAS UL USABC USNEC UTE European Committee for Normalisation (Standards Committee) European Committee for Electrotechnical Standardisation International Special Committee on Radio Interference Committee on Data for Science and Technology (Committee of ICSU) Canadian Standards Association Defence Standards (UK) Danmarks Electriske Materielkontrol (Denmark) Deutsches Institut für Normung (German Institute for Standardisation) Economic Commission for Europe regulations. Electronics Industry Association (USA) European Norms (Standards) Federal Communications Commission (USA) Finnish Electrical Inspectorate Foundation for Intelligent Physical Agents (Interoperability standards) Guo Biao = National Standard (People's Republic of China) Health & Safety Executive (UK) International Council for Science International Electrotechnical Commission Institution of Electrical Engineers (UK) Institute of Electrical and Electronics Engineers (USA) Instituto Italiano del Marchio de Qualitá Ingress Protection International Standards Organisation Japanese Industrial Standard Keuring van Elektrotechnishe Materialen (Netherlands) Korean Institute of Standards and Technology Military Standards (USA) Motor Industry Software Reliability Association (UK) Motor Vehicle Emission Group (EU Emission standards) National Measurement Accreditation Service (UK Calibration) National Electric Manufacturers Association (USA) Norges Electriske Materiellkontroll (Norway) Norme Française (France) National Fire Protection Association (USA) National Institute of Justice (USA) US Department of Labor - Occupational Safety & Health Administration Osterreichischer Verband für Elektrotechnik (Austria) Automotive 42 Volt Battery Standard Rehabilitation Engineering & Assistive Technology Society of North America Society of Automotive Engineers (USA) Svenska Elektriska Materielcontrollanstalten (Sweden) Schweitzerischer Elektrotechnische Verein (Swiss) NATO Standards Agreements DTI Standards and Technical Regulations Directorate (UK) Telecommunications Industry Association (USA) Technical Report (Used by IEC) TÜV Rheinland Group (TUV - Technical Inspection Asssociation) UK Accreditation Service (Assessment of test services)/(Calibration) Underwriters Laboratories Requirements (USA) United States Advanced Battery Consortium United States National Electrical Code Union Technique de l'Electriciteé (France)

Page 2 of 10

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

VDE Standard Number IEC 60050 Verband Deutscher Elektrotechniker (Germany)

Page 3 of 10

General Battery Standards

Title International electrotechnical vocabulary. Chapter 486: Secondary cells and batteries. IEC 60086-1, BS 387 Primary Batteries - General IEC 60086-2, BS ANSI C18.1M ANSI C18.2M ANSI C18.3M UL 2054 IEEE 1625 USNEC Article 480 ISO 9000 Batteries - General Portable Primary Cells and Batteries with Aqueous Electrolyte - General and Specifications Portable Rechargeable Cells and Batteries - General and Specifications Portable Lithium Primary Cells and Batteries - General and Specifications Safety of Commercial and Household Battery Packs - Testing Standard for Rechargeable Batteries for Mobile Computers Storage Batteries A series of quality management systems standards created by the ISO. They are not specific to products or services, but apply to the processes that create them. ISO 9001: 2000 ISO 14000 ISO/IEC/EN 17025 Model for quality assurance in design, development, production, installation and servicing. A series of environmental management systems standards created by the ISO. General Requirements for the Competence of Calibration and Testing Laboratories

Lithium Battery Standards

Standard Number BS 2G 239:1992 IEC 60086-4:2000 BS EN 61960-1:2001, Secondary lithium cells and batteries for portable applications. Secondary IEC 61960-1:2000 IEC 61960-2:2001 02/208497 DC lithium cells lithium batteries IEC 61960. Ed.1. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications 02/209100 DC BS G 239:1987 IEC 60086-4:1996 UL 1642 GB /T18287-2000 ST/SG/AC.10/27/ Add.2 Safety of Lithium-Ion Batteries - Testing Chinese National Standard for Lithium Ion batteries for mobile phones United Nations recommendations on the transport of dangerous goods IEC 62281. Ed.1. Safety of primary and secondary lithium cells and batteries during transport Specification for primary active lithium batteries for use in aircraft BS EN 60086-4:1996, Primary batteries. Safety standard for lithium batteries BS EN 61960-2:2002, Secondary lithium cells and batteries for portable applications. Secondary Title Specification for primary active lithium batteries for use in aircraft

BS EN 60086-4:2000, Primary batteries. Safety standard for lithium batteries

Nickel Metal Hydride Battery Standards

Standard Number IEC 61436:1998 IEC 61808:1999 IEC 61951-2:2001 Title Sealed nickel-metal hydride rechargeable single cells Sealed nickel-metal hydride button rechargeable single cells Portable sealed rechargeable single cells. Nickel-metal hydride BS EN 61436:1998, Secondary cells and batteries containing alkaline or other non-acid electrolytes. BS EN 61808:2001, Secondary cells and batteries containing alkaline or other non-acid electrolytes. BS EN 61951-2:2001, Secondary cells and batteries containing alkaline or other non-acid electrolytes. BS EN 61951-2:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes.

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

Portable sealed rechargeable single cells. Nickel-metal hydride 96/216533 DC 97/204158 DC IEC 1808. Sealed nickel-metal hydride button rechargeable single cells (IEC Document 21A/207/CD) IEC 1441. Secondary cells and batteries containing alkaline or other non-acid electrolytes. User-replaceable batteries containing more than one sealed nickel-metal hydride rechargeable cell for consumer electronic applications (21A/212/CD) 00/246138 DC GB/T18288-2000 Standard Number

Page 4 of 10

BS EN 61436 Ed 2. Sealed nickel-metal hydride rechargeable single cells (IEC Document 21A/303/CD) Chinese National Standard for Nickel Metal Hydride batteries for mobile phones

Nickel Cadmium Battery Standards

Title battery powered trucks BS EN 2570:1996 BS EN 2985:1996 BS EN 2986:1996 BS EN 2987:1996 BS EN 2988:1996 BS EN 2991:1996 BS EN 2993:1996 IEC 60285:1993 BS EN 60622:1996 BS EN 60622:2003 Nickel-cadmium batteries. Technical specification Nickel-cadmium batteries of format A type Nickel-cadmium batteries of format B type Nickel-cadmium batteries of format C type Nickel-cadmium batteries of format D type Nickel-cadmium batteries of format E type Nickel-cadmium batteries of format F type rechargeable single cells Sealed nickel-cadmium prismatic rechargeable single cells Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cells BS EN 60623:1996, Vented nickel-cadmium prismatic rechargeable single cells IEC 60623:1990 BS EN 60623:2001, Secondary cells and batteries containing alkaline or other non-acid electrolytes. IEC 60623:2001 BS EN 60993:2002 IEC 61150:1992 IEC 61440:1997 IEC 61951-1:2001 Vented nickel-cadmium prismatic rechargeable single cells Electrolyte for vented nickel-cadmium cells monobloc batteries in button cell design Sealed nickel-cadmium small prismatic rechargeable single cells Portable sealed rechargeable single cells. Nickel-cadmium Portable sealed rechargeable single cells. Nickel-cadmium BS EN 62259:2004 94/216281 DC Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination Guide to the equipment manufacturers and users of alkaline secondary cells and batteries on possible safety and health hazards. Part 1:Nickel-cadmium. (21A/163/CD) 96/203612 DC 98/203520 DC 01/202968 DC IEC 1914. Technical report type 2. Alternative publication for vented nickelcadmium prismatic rechargeable single cells (IEC Document 21A/186/CDV) IEC 61959-1, ED.1. Mechanical tests for sealed portable alkaline secondary cells and batteries. Part 1. Secondary cells IEC DOCUMENT 21A/239/CD BS EN 60285. Ed.4. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium cylindrical rechargeable single cells BS 5932:1980 Specification for sealed nickel-cadmium cylindrical rechargeable single cells BS EN 1175-1:1998 Safety of industrial trucks. Electrical requirements. General requirements for

BS EN 60285:1995, Alkaline secondary cells and batteries. Sealed nickel-cadmium cylindrical

BS EN 61150:1994, Alkaline secondary cells and batteries. Sealed nickel-cadmium rechargeable BS EN 61440:1998, Secondary cells and batteries containing alkaline or other non-acid electrolytes. BS EN 61951-1:2001, Secondary cells and batteries containing alkaline or other non-acid electrolytes. BS EN 61951-1:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes.

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

BS 6115:1981 BS 6260:1982 BS 3G 205:1983 GB/T18289-2000 Standard Number IEC/TR 62060:2001 BS 3031:1996 BS 4974:1975 BS 6133:1995 BS 6287:1982 BS 6290-2:1999 BS 6290-3:1999 BS 6290-4:1997 BS 7481:1992 BS 7483:1991 BS 6G 205-1:1995 BS EN 50342:2001 Specification for sealed nickel-cadmium prismatic rechargeable single cells Specification for open nickel-cadmium prismatic rechargeable single cells Specification for lead-acid and nickel-cadmium rechargeable batteries Chinese National Standard for Nickel Cadmium batteries for mobile phones

Page 5 of 10

Lead Acid Battery Standards

Title Monitoring of lead-acid stationary batteries User guide Specification for sulfuric acid used in lead-acid batteries Specification for water for lead-acid batteries Code of practice for safe operation of lead-acid stationary batteries Code of practice for safe operation of traction batteries Lead-acid stationary cells and batteries. Specification for the high-performance Planté positive type Lead-acid stationary cells and batteries. Specification for the flat positive plate type Lead-acid stationary cells and batteries. Specification for classifying valve regulated types Code of practice for testing venting systems and shields for lead-acid starter batteries Specification for lead-acid batteries for the propulsion of light electric vehicles Secondary batteries for aircraft. Specification for lead-acid batteries Lead-acid starter batteries. General requirements, methods of test and numbering BS EN 60095-2:1993 Lead-acid starter batteries. Dimensions of batteries and dimensions and marking of terminals BS EN 60095-4:1993 Lead-acid starter batteries. Dimensions of batteries for heavy commercial vehicles BS EN 60254-1:1997, Lead-acid traction batteries. General requirements and methods of test IEC 60254-1:1997 BS EN 60254-2:1997 Lead-acid traction batteries. Dimensions of cells and terminals and marking of polarity on cells BS EN 60896-1:1992, Stationary lead-acid batteries. General requirements and methods of test. IEC 60896-1:1987 IEC 60896-2:1995 BS EN 6089611:2003 IEC 61044:1990 BS EN 61056-1:1993, Portable lead-acid cells and batteries (valve-regulated types). General IEC 61056-1:1991 requirements, functional characteristics. Methods of test requirements, functional characteristics. Methods of test BS EN 61056-2:1997, Portable lead-acid cells and batteries (valve-regulated types). Dimensions, IEC 61056-2:1994 terminals and markings terminals and marking BS EN 61429:1997, Marking of secondary cells and batteries with the international recycling symbol IEC 61429:1995 88/74677 DC ISO 7000-1135 Aerospace series. Lead acid batteries for aircraft. General standard (prEN 3199) BS EN 61056-2:2003 Portable lead-acid cells and batteries (valve-regulated types). Dimensions, BS EN 61056-1:2003 Portable lead-acid cells and batteries (valve-regulated types). General Vented types Valve regulated types Stationary lead-acid batteries. General requirements and methods of test. Vented types. General requirements and methods of tests BS EN 60896-2:1996, Stationary lead-acid batteries. General requirements and methods of test. IEC/TR3 61431:1995 Guide for use of monitor systems for lead-acid traction batteries

BS EN 61044:1993, Opportunity-charging of lead-acid traction batteries

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

99/200338 DC 00/201034 DC 00/202302 DC 00/202303 DC 03/107988 DC BS 440:1964 BS 2550:1971 BS 2550:1983 BS 3031:1972 Aircraft batteries. Part 1. General test requirements and performance levels (IEC document 21/466/CD)

Page 6 of 10

BS EN 60896-1 Ed.2. Stationary lead-acid batteries. General requirements and methods of test. Part 1. Vented types (IEC Document 21/487/CD) BS EN 60952-2, Ed.2. Aircraft batteries. Part 2. Design and construction requirements (IEC Document 21/509/CD) BS EN 60952-3, Ed. 2. Aircraft batteries. Part 3. External electrical connectors (IEC Document 21/510/CD) IEC 60254-1. Lead-acid traction batteries. Part 1. General requirements and methods of tests Specification for stationary batteries (lead-acid Planté positive type) for general electrical purposes Specification for lead-acid traction batteries for battery electric vehicles and trucks Specification for lead-acid traction batteries Specification for sulphuric acid for use in lead-acid batteries batteries requiring regular maintenance

BS 3911:Part 1:1982 Lead-acid starter batteries for internal combustion engines. Specification for BS 3911:Part 2:1987 Lead-acid starter batteries for internal combustion engines. Specification for maintenance-free and low-maintenance batteries BS 4945:1973 BS 6133:1982 BS 6133:1985 BS 6290-2:1984 BS 6290-3:1986 Specification for miners' cap lamp assemblies (incorporating lead-acid type batteries) Code of practice for safe operation of lead-acid stationary cells and batteries Code of practice for safe operation of lead-acid stationary cells and batteries Lead-acid stationary cells and batteries. Specification for lead-acid high performance Planté´ positive type Lead-acid stationary cells and batteries. Specification for lead-acid pasted positive plate type BS 6290:Part 4:1987 Lead-acid stationary cells and batteries. Specification for lead-acid valve regulated sealed type BS 6745:Part 1:1986 Portable lead-acid cells and batteries. Specification for performance, design and construction of valve regulated sealed type BS AU 118:1965 BS 3G 205:1983 BS 4G 205:Part 1:1987 BS 5G 205:Part 1:1990 BS EN 60095-1:1993 Lead-acid starter batteries. General requirements and methods of test Secondary batteries for aircraft. Specification for lead-acid batteries Recommendations for the storage, shipment and maintenance of lead acid batteries for motor vehicles Specification for lead-acid and nickel-cadmium rechargeable batteries Secondary batteries for aircraft. Specification for lead-acid batteries

BS 6290:Part 1:1983 Lead-acid stationary cells and batteries. Specification for general requirements

Photovoltaic Battery Standards

Standard Number IEC 61427:1999 99/240906 DC 99/240907 DC 99/240908 DC 99/240909 DC Title Secondary cells for solar photovoltaic energy systems General requirements and test methods BS EN 50314-1. Photovoltaic systems. Charge regulators. Part 1. Safety. Test requirements and procedures BS EN 50314-2. Photovoltaic systems. Charge regulators. Part 2. EMC. Test requirements and procedures BS EN 50314-3. Photovoltaic systems. Charge regulators. Part 3. Performance. Test requirements and procedures BS EN 50315-1. Accumulators for use in photovoltaic systems. Part 1. Safety.

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

Test requirements and procedures 99/240910 DC BS EN 50315-2. Accumulators for use in photovoltaic systems. Part 1. Performance. Test requirements and procedures

Page 7 of 10

Safety Standards

Standard Number IEC 61508 Title The IEC requirements for the functional safety of Electrical/Electronic/Programmable Electronic Safety Related Systems BS EN 1175-1:1998 Safety of industrial trucks. Electrical requirements. General requirements for battery powered trucks BS EN 45510-23:2000 Guide for the procurement of power station equipment. Electrical equipment. Stationary batteries and chargers batteries BS EN60950-1: 2002 Low Voltage Directive (Safety) IEC/TR2 61430:1997 Test methods for determining the performance of devices designed for reducing explosion hazards - Lead-acid batteries IEC62133:2002 Secondary batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made of them, for use in portable applications IEC/TR2 61438:1996 Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide to equipment manufacturers and users ANSI C18.2M UL 2054 EN 45011 EAS BS 2754 STRD Low Voltage Directive IEC 479-1 IEEE 80 2000 HSG 85 NFPA 70E-1995 OSHA - 29 CFR 1910, Subpart S, Electrical ATEX Directive 94/9EC EN70079 Standard Number QS 9000 ISO/TS16949:2002 IEC 61982-1 IEC 61982-2:2002 IEC 61982-3:2001 ISO11898 ISO 9141(4) SAE J240 SAE J537 Guidelines for equipment intended for use in potentially Explosive Atmospheres (ATEX) Safety Requirements for Portable Rechargeable Cells and Batteries Safety Requirements for Household and Commercial Batteries General requirements for bodies operating product certification schemes The UK Electrotechnical Assessment Scheme (Electrical installation safety standards managed by the IEE) Memorandum. Construction of electrical equipment for protection against electric shock The Electrical Equipment (Safety) Regulations 1994 SI 1994 No. 3260 Implementing Directive 73/23/EEC (The Low Voltage Directive - LVD) Effects of current on human beings and livestock IEEE Guide for Safety in AC Substation Grounding HSE publication. Electricity at Work. Safe Working Practices Standard for Electrical Safety Requirements for Employee Workplaces Electrical industry safe occupational working standards

BS EN 50272-2:2001 Safety requirements for secondary batteries and battery installations. Stationary

Automotive Battery Standards

Title The ISO 9000 derivative for suppliers to the automotive industry. Developed in the USA by Ford, General Motors and Daimler Chrysler Updated Technical Specification aligning US and European automotive quality supply chain standards Test parameters Dynamic discharge performance test and dynamic endurance test Performance and life testing (traffic compatible, urban use vehicles) Specification for the CAN Bus Specification for the LIN Bus Life Test for Automotive Storage Batteries Storage Batteries

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

SAE J551 SAE J1127 SAE J1455 SAE J1718 SAE J1742 SAE J1766 SAE J1772 SAE J1773 SAE J1797 SAE J1798 SAE J1811 SAE J1939 SAE J2185 SAE J2288 SAE J2289 SAE J2293 SAE J2344 SAE J2380 SAE J2464 SAE J2602 PowerNet 42V BCI Battery Technical Manual BCI Battery Service General information about manufacturing and using automotive batteries. Manual BCI Test Specifications ECE 100 ECE-15 EUDC NEDC FUDS DST 2004/104/EC Standard Number 99/200338 DC 00/202302 DC 00/202303 DC Small Deep Cycling Batteries, Deep Cycle Marine/RV Batteries, Batteries for Golf Cars, Floor Maintenance Machinery Construction and functional safety requirements for battery electric vehicles UN/EEC driving load profile (See Battery Load Testing) UN/EEC Extra Urban Driving Cycle

Page 8 of 10

Performance levels and methods of measurement of electromagnetic radiation from vehicles and devices (30 to 1000 MHz) Battery Cable Recommended Environmental Practice for Heavy-Duty Trucks Measurement of Hydrogen Gas Emission From Battery-Powered Passenger Cars and Light Trucks During Battery Charging Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses-Test Methods and General Performance Requirements Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing (Work in progress) SAE Electric Vehicle Conductive Charge Coupler SAE Electric Vehicle Inductively Coupled Charging Recommended Practice for Packaging of Electric Vehicle Battery Modules Recommended Practice for Performance Rating of Electric Vehicle Battery Modules Power Cable Terminals The SAE specification for the CAN Bus Life Test for Heavy-Duty Storage Batteries Life Cycle Testing of Electric Vehicle Battery Modules Electric Drive Battery Pack System Functional Guidelines Energy Transfer System for Electric Vehicles Guidelines for Electric Vehicle Safety Vibration Testing of Electric Vehicle Batteries Electric Vehicle Battery Abuse Testing The SAE specification for the LIN Bus Automotive industry consortium standard for 42 Volt batteries Automotive Lead Acid battery test procedures

New European Driving Cycle (Modified cold start - No warm up) Also called the MVEG-B test Federal Urban Driving Schedule (USABC Load profile) Dynamic Stress Test (USABC battery test schedule) European EMC Automotive Regulation

SAE J227a/C and D SAE Driving Schedules

Aircraft Battery Standards

Title Aircraft batteries. Part 1. General test requirements and performance levels (IEC document 21/466/CD) BS EN 60952-2, Ed.2. Aircraft batteries. Part 2. Design and construction requirements (IEC Document 21/509/CD) BS EN 60952-3, Ed. 2. Aircraft batteries. Part 3. External electrical connectors (IEC Document 21/510/CD)

Military Standards for Batteries, Software, EMC/RFI, Safety & Quality

Standard Number DEF STAN 61-3 Title Generic specification for batteries, non-rechargeable, primary

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

Replaced by DEF STAN 61-21 DEF STAN 61-9 DEF STAN 61-17 DEF STAN 61-21 DEF STAN 00-40 DEF STAN 00-55 DEF STAN 00-56 DEF STAN 05-91 DEF STAN 05-95 DEF STAN 05-97 DEF STAN 08-46 DEF STAN 59-41 MIL-STD-461 D MIL-STD-461 E MIL-STD-462 D Standard Number EIA/TIA 603 1993 NIJ Standard 0211.01 1995 Generic specification for batteries, rechargeable, secondary Replaced by DEF STAN 61-21 Requirements for the selection of batteries for service equipment General specification for batteries. (Includes a long series of supplements for individual battery types) Replaces DEF STAN 61-3 and 61-9 Reliability and Maintainability Requirements for Safety Related Software in defence equipment Safety Management Requirements for defence systems Quality System Requirements for Design/Development, Production and Installation. Quality System Requirements for the Design, Development, Supply and Maintenance of Software. Requirements for Deliverable Quality Plans. The Electric, Magnetic and Electromagnetic Environment. Electromagnetic Compatibility (EMC) Requirements for the Control of Electromagnetic Interference Emissions and Susceptibility Requirements for the control of electromagnetic interference characteristics of subsystems and equipment Measurement of Electromagnetic Interference Characteristics

Page 9 of 10

Radio Battery Standards

Title Land Mobile FM or PM Communications Equipment, Measurement and Performance Standard (Battery duty cycles) Rechargeable Batteries for Personal/Portable Transceivers

Standby Power Systems Standards

Standard Number Title Vented Lead-Acid Batteries for Stationary Applications ANSI/IEEE 11841994 ANSI/IEEE 11881996 IEC 60896-1 1987 BS 6290 1999 IEC 62040-3 ENV 50091-3 NFPA 111 1989 Standard Number ISO/IEC 12207 MISRA C 1998 IEEE Recommended Guide for Selection and Sizing Batteries for Uninterruptible Power Supply, (UPS) IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications Stationary Battery Tests Stationary Battery Tests Standards for different UPS Topologies and Methods of Performance Measurement ( V indicates a prestandard) Standard for Stored Electrical Energy Emergency and Standby Power Systems ANSI/IEEE 450-2002 IEEE Recommended Practice for Maintenance, Testing, and Replacement of

Software Standards

Title Standard for software life cycle processes Guidelines for the use of the C language in vehicle based software. Derived from IEC 61508 Functional Safety Standards (See above) See also Military Standards above

EMC/RFI Standards

Standard Number Title See Military Standards above

Ingress Protection (IP) Standards

Standard Number Title ANSI/IEC 60529-2004Degrees of Protection Provided by Enclosures (IP Code)

http://www.mpoweruk.com/standards.htm

2009/07/14

International Battery Standards

Battery Monitoring Standards

Standard Number IEC/TR 61431 1995 IEC/TR 62060 2001 Title Guide for the use of monitor systems for lead-acid traction batteries Secondary cells and batteries - Monitoring of lead acid stationary batteries User guide

Page 10 of 10

Battery Recycling and Disposal Standards

Standard Number Title (Currently being revised) BS EN 61429:1997, Marking of secondary cells and batteries with the international recycling symbol IEC 61429:1995 Standard Number BS 7671:2001 NFPA 70 1993 UL 1310 ISO 7176-4 1997 BS EN 60598-222:1999 ISO 7000-1135 EEC Directive 91/157 Batteries and accumulators containing certain dangerous substances.

Other Related Electrical Standards

Title The IEE Wiring Regulations (UK) National Electrical Code (USA) Safety of Class 2 Power Supplies, AC Adapters and Battery Chargers - Testing Wheelchairs -- Part 4: Energy consumption of electric wheelchairs and scooters Luminaires. Particular requirements. Luminaires for emergency lighting

ANSI/RESNA WC04 for determination of theoretical distance range

Quality Standards

Standard Number ISO 9000:2000 ISO 14001:1996 ISO 2859-0:1995 ANSI/ASQC Z1.4 Title Quality management systems. Fundamentals and vocabulary Environmental management systems. Specification with guidance for use Sampling procedures for inspection by attributes Sampling Procedures and Tables for Inspection by Attributes

Print This Page ||

Bookmark This Page || Home || FAQ || Site Map || Legal || Privacy Promise || Contacts

Woodbank Communications Ltd, South Crescent Road, Chester, CH4 7AU, (United Kingdom) Copyright

© Woodbank Communications Ltd 2005

http://www.mpoweruk.com/standards.htm

2009/07/14

Information

http://www.mpoweruk.com/standards.htm

10 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

898080


You might also be interested in

BETA
HP Compaq 8200 Elite CMT Business PC_IT ECO Declarations
LANCAT~1.QXD
511_Stat.Sys.Batteries.R.0.doc
F:-6.PDF