Read pMini%20Mating%20Nuc%204x4.pdf text version

scale - 1"=4"

4X4 Mini Mating(6-1/8") cut in 1 of 3 Nuc half. Designed to hold medium frames

Drawn by Gary S. Reuter University of Minnesota Dept. of Entomology 10-20-02

4 3/4" inner covers not shown

1"=8"

3 1/4"

15"

15 3/4"

9 1/2" See panel detail view Center is sealed with water proof glue and or parrafin or a container to fit opening. Center dividers and tops are made with 8x8 hardware cloth.

FEEDER NOTE: Feeder top screen is shown transparent and off scale to show details below.

7 1/2"

1/2" Plywood treated 1 1/2" 2 x 2 treated

scale - 1"=4"

4X4 Mini Mating Nuc 2 of 3 Detail drawings

outside panel

inside view 1/2"

Drawn by Gary S. Reuter University of Minnesota Dept. of Entomology 10-20-02

inside panel

inside view

7 1/2"

7 1/2"

5/8"

5/8"

top view 3/4" 15" 1/2" 4 3/4" 3/8"

top view 3/4" 1/2" 3 5/8" 9 1/2" Material List #2 pine 4 - 3/4 x 7-1/2 x 15 4 - 3/4 x 7-1/2 x 9-1/2 4 - 3/4 x 2-1/2 x 17 plywood 1 - 1/2 x 15-3/4 x 15-3/4 1 - 1/2 x 16-1/4 x 16-1/4 hardboard 4 - 1/4 x 3-7/8 x 6-1/2 treated lumber 1 - 1-1/2 x 1-1/2 x 15-3/4 Flashing 1 - 18 x 18

3/8" 3/8"

4 - 1/4" x 3-7/8" x 6-1/2" inner covers (Masonite or plywood)

scale - 1"=4"

4X4 Mini Mating Nuc 3of 3

Outer Cover All lumber is 3/4" unless indicated otherwise

Drawn by Gary S. Reuter University of Minnesota Dept. of Entomology 10-20-02

Notes 1. Top is 1/2" plywood. 2. Top and 1/2" down all sides is covered with aluminum flashing. (not shown) 3. Corner rabbets are 3/8" x 3/8" 4. Top rabbets are 3/8" x 1/2" 5. Plywood top fits into 1/2" rabbets 6. Typical corner joint

1/2" plywood top 16-5/16" x 16-5/16"

16 1/4" 17"

Information

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

162196


Notice: fwrite(): send of 210 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531