Read verodanica cat engl1.pdf text version

VERO + Danica

19"- Power Supplies PK-Series

pk30 pk60 pk60-r pk120 pk125 pk250

AC-DC

pk30 pk60 pk60-r

PK30 PK60 PK60-R PK120 PK125 PK250

pk120 pk125 pk250

12

VERO + Danica

PK-Series: MONOVOLT

Primary switched mode power supplies for use in 19" subracks to DIN41494, 30 to 240 Watt output power. Features n Compact, rugged design n high regulation accuracy n Safety to approvals UL, cUL and EN60950 n CE marked for compliance to EMC and Low Voltage Directives n SENSE operation n Overvoltage protection (OVP) n Powerfail signal n Remote On/Off n Short circuit and no load protected n Coded H15 connector n Standardized pinning

PK-Series MONOVOLT Power Supplies

Ordering information

Description: PK Series Power Supplies 30W Output power Type PK30 3Ux8HP PK30 3Ux8HP PK30 3Ux8HP Output 5V/6A 12-15V/2A 24V/1,5A without Powerfail 116-010016D* 116-010215H 116-010216E Order-Code with Powerfail -

Technical Data PK Series: Monovolt Input specification

Input voltage (switchable): Input frequency: Inrush surge current limitation: Input overvoltage protection: Hold up time (Nominal VIN; 100% IOUT): Efficiency: Certified to, or meets the reqirement of: 115/230VAC 47-63Hz by NTC resistor m20A (cold start) by VDR >20ms typ. >80% EN60950, UL1950

Description: PK Series; 60Watt Output power PK60 3Ux8HP PK60 3Ux8HP PK60 3Ux8HP PK60 3Ux8HP PK60 3Ux8HP PK60-R 3Ux8HP PK60-R 3Ux8HP PK60-R 3Ux8HP PK60-R 3Ux8HP PK120 3Ux14HP PK120 3Ux14HP PK120 3Ux14HP PK120 3Ux14HP PK240 3Ux24HP PK240 6Ux14HP PK240 3Ux24HP PK240 6Ux14HP PK240 3Ux24HP PK240 6Ux14HP 3,3V/15A 5V/12A 12V/5A 15V/4A 24V/2,5A 5V/12A 12V/5A 15V/4A 24V/2,5A 5V/20A 12V/10A 15V/8A 24V/5A 5V/45A 5V/45A 12V/20A 12V/20A 24V/10A 24V/10A 116-010196L 116-010063D* 116-010064A* 116-010065J* 116-010066F* 116-010128L# 116-010219G# 116-010220H# 116-010129H# 116-010069H 116-010070J 116-010071F 116-010072C 116-010074H* 116-010077K* 116-010081B 116-010082K 116-010084D 116-010163K 116-010125J 116-010164G 116-010126F 116-010165D 116-010127C

Safety (Compliant with Low Voltage Directive 73/23/EEC) EMC (Compliant with EMC Directive 89/336/EEC)

Environmental

Description: PK Series; 120Watt Output power

Operating temperature: Storage temperature: Relative humidity:

0°C to +70°C -25°C to +85°C Non-condensing 5% - 95% Clear anodised, ventilated aluminium cassette with cooling cutouts and front or rear heat sinks as required. DIN 41494 part 5 compatible

Physical

Case material/finish:

Description: PK Series; 240Watt Output power

* EN60950 and UL certified # EN60950 and cUL certified

Accessories: Reduced height front panel: PK30 Reduced height front panel: PK60 Reduced height front panel: PK120 Mating connector coded H15 to DIN 41612 Coding keys (pkt10) Mating connector coded DIN 41612, H15+2HA/L Faston

148-010012F 148-010021E 148-010019G 017-010115K 017-010064F 017-010138K

For applications ruled under EN 61000-3-2, we recommend the use of the VP80 series.

13

AC-DC

Emmisions: EN 55022/B (0,15-30Mhz); EN 55022/B (30-1000MHz) Immunity: EN 50082-2 Electro Static Discharge: EN 61000-4-2 Electrical fast transients/Burst: EN 61000-4-4 RF Conducted disturbance: EN 50141 RF Field susceptibility: EN 50140

VERO + Danica

PK Series: MONOVOLT

Output specification

PK30 Output voltage: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail-Signal (at full load) >6ms before VOUT: o Temperature-coefficient/ C: Voltage compensation with SENSE max. NOTE 1: Derating: V1 5V 4,8-5,5V 0-6A <40mVPP <0,2% <0,2% V1 12V 12-15V 0-2,5A <20mVPP <0,02% <0,5% 1ms 20-50kHz fly back converter >2,6A continuous, automatic restart 0,02% 0,5V o o 1W/ C above 55 C V1 24V 22-26V 0-1,5A <20mVPP <0,02% <0,5%

>6,5A 6-6,7V

>1,5A -

AC-DC

PK60 Output voltage: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail-Signal (at full load) >6ms before VOUT: o Temperature-coefficient/ C: Voltage compensation with SENSE max. NOTE 1 : Derating:

V1 3,3V 1,8-3,5V 0-15A <0,3% 1ms >15,5A 2,8-5,0V

V1 5V 4,5-5,5V 0-12A <0,3% 0,8ms >12,5A 5,5-6,0V -

V1 V1 12V 15V 11-13V 13,5-16,5V 0-5A 0-4A <40mVPP <0,2% <0,2% <0,2% 0,5ms 0,5ms 100kHz forward converter >5,3A >4,3A continuous, automatic restart 13,2-15,0V 16,5-18,0V 0,02% 0,5V o o 1,6W/ C above 45 C

V1 24V 22-26V 0-2,5A <0,2% 0,5ms >2,7A 26,4-30,0V

PK60-Redundant Output voltage: (fixed): Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): o Temperature-coefficient/ C: Current sharing at redundant use with ASF signal: Voltage compensation with SENSE max. NOTE 1: DC-FAIL signal: Derating:

V1 5V±1% 0-12A

V1 12V±1% 0-5A

V1 15V±1% 0-4A

V1 24V±1% 0-2,5A

<40mVPP <0,2% <0,2% 1ms 100kHz forward converter >12,5A >5,3A >4,3A >2,7A continuous, automatic restart 6,0-6,7V 13,2-15,0V 16,5-18,0V 27,0-29,0V 0,02% >2,4A >1,0A >0,8A >0,5A 0,5V Active low when unit fails (NPN-open collector signal; 20mA; l0,4A) o o 2W/ C above 55 C

14

VERO + Danica

PK Series: MONOVOLT

Output specification

PK120 Output voltage: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail-Signal (at full load) >6ms before VOUT: o Temperature-coefficient/ C: Voltage compensation with SENSE max. NOTE 1: Derating: PK240 Output voltage: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail-Signal (at full load) >6ms before VOUT: o Temperature-coefficient/ C: Voltage compensation with SENSE max.NOTE 1: Derating: V1 5V 4,5-5,5V 0-20A V1 12V 10,8-13,2V 0-10A V1 15V 13,5-16,5V 0-8A V1 24V 21,6-26,4V 0-5A

>22A 5,0-7,0V >4,8V

>40mVPP >0,2% >0,2% 0,5ms 100kHz forward converter >11A >8,8A continuous, automatic restart 12,0-16,5V 15,0-21,0V >11,5V >14,4V 0,02% 0,5V o o 2,4W/ C above 55 C V1 5V 4,5-5,5V 0-45A >0,2% V1 12V 11-13V 0-20A >40mVPP >0,35% >0,2% 0,5ms 45kHz push-pull converter >22A continuous, automatic restart 14,0-18,0V >11,5V 0,02% 0,5V o o o o 3HE: 8W/ C above 55 C, 6HE: 4W/ C above 55 C

>5,5A 27,0-29,0V >23,0V

V1 24V 22-26V 0-10A >0,5%

>46A 5,5-6,5V >4,8V

>12A 26,4-30,0V >23V

15

AC-DC

VERO + Danica

PK Series: MONOVOLT

Mechanical details PK30, PK60 PK 60-R

Weight: PK30, PK60, PK60R 850g

PK120

PK240

3U

Weight: PK120

1350g

24HP

14HP

Weight: PK240

2200g

AC-DC

Connector pin allocation H15-Connector

PIN 4 6 8 10 12 Anm. 1 14 Anm. 1 16 18 2 0 2 2 24 26 28 30 32 Function PK30 +Vout +Vout -Vout -Vout +SENSE -SENSE ---- ---- -- -- -- -- ---- ---- N L E Function PK60 +Vout +Vout -Vout -Vout +SENSE -SENSE Ext I/O+ PF Q --­ PF Q Ext I/O---- N L E Function PK60-R +Vout +Vout -Vout -Vout +SENSE -SENSE ---- DC FAIL ASF -- -- ---- ---- N L E Function PK120 +Vout +Vout -Vout -Vout +SENSE -SENSE Ext I/O+ PF Q -- -- PF Q Ext I/O---- N L E

H15-connector H15+2HA-Connector

3U

14HP

6U

I

II 14 16 18 20 22 24 26 28 30 32

Connector pin allocation H15+2HA-Connector

PIN I II 14 Note. 1 16 Note. 1 22 24 28 30 32 Function PK240 +Vout -Vout +SENSE -SENSE Ext on/off PF Q N L E

Note1: Sense lines must be connected. For maximum compensation for supply lead voltage drop they should be connected as close to the load as possible

16

VERO + Danica

PK-Series: BIVOLT

Primary switched mode power supplies for use in 19" subracks to DIN41494, 30 or 60 Watt output. Features n High regulation accuracy n Voltages adjustable n Compact, rugged design n Safety approvals to UL, cUL and EN60950 n CE marked for compliance to EMC and Low Voltage Directives n SENSE operation (5V output) n Overvoltage (OVP) and short circuit protected n Remote On/Off n No minimum load required n Coded H15 connector n Standardized pinning

PK Series Bivolt Plug-in Power Supplies

Technical Data PK Series: Bivolt Ordering information

Description: Bivolt PK30, PK60; Model PK30 3U x 8HP Description: Bivolt PK60, PK60-A 3U x 8HP PK60-A 3U x 8HP PK60-C 3U x 8HP PK60-D 3U x 8HP 30 and 60 Watt outputs Order code 116-010015G* Output voltage ±12 - 15V/1A 60 Watt outputs ±12-15V/2A 5V/6A;12-15V/2A 5V/6A;24V/1,5A 12-15V/2A;24V/1,5A

Input specification

Input voltage selectable: Input frequency: Inrush surge current limitation: Input overvoltage protection: Hold up time (Nominal VIN; 100% IOUT): Efficiency: 115/230VAC 47-63Hz by NTC resistor by VDR >20ms typ. >75%

116-010022A# 116-010024F# 116-010025C# 116-010080E#

Safety (Compliant with Low Voltage Directive 73/23/EEC)

Certified to: EN60950, UL1950

EMC (Compliant with EMC Directive 89/336/EEC)

Emmisions: EN 55022/B (0,15-30MHz); EN 55022/B (30-1000MHz) Immunity: EN 50082-2 Electro Static Discharge: EN 61000-4-2 Electrical fast transients/Burst: EN 61000-4-4 RF Conducted disturbance: EN 50141 RF Field susceptibility: EN 50140

Environmental

Operating temperature: Storage temperature: Relative humidity: 0°C to +70°C -25°C to +85°C Non-condensing 5% - 95%

Physical

Case material/finish: Clear anodised, ventilated aluminium cassette with cooling cutouts and front or rear heat sinks as required. DIN 41494 part 5 compatible * EN60950 and UL certified # EN60950

17

AC-DC

Accessories: Reduced height front panel (PK30) Reduced height front panel (PK60) Mating connector coded H15 to DIN 41612 Coding keys (pkt 10)

148-010013C 148-010011J 017-010115K 017-010064F

VERO + Danica

PK-Series: BIVOLT

Output specifications

PK30 Output voltage: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail Signal (at full load) >6ms before VOUT: o Temperature coefficient/ C: Voltage compensation with SENSE max.NOTE1: Derating: PK60 Output voltage: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): o Temperature-Coefficient/ C: Voltage compensation with SENSE max.NOTE1: Derating: A:V1,V2 ±12-15V ±0-2A <20mVPP <0,5% V1, V2 ±12V - 15V ±0-1A <3mVPP <0,02% <0,5% 10ms 20-50kHz flyback converter >2,2A continuous, automatic restart 0,02% 0,5V o o 1,3W/ C above 55 C C:V1,V2 D:V1,V2 5V(4,5-5,5V)/24V(22-26V)12-15V/24V(22-26V) 0-6/0-1,5A 0-2/0-1,5A <40mVPP <40mVPP <0,2% <0,2%/0,5% <0,2%/0,5% <0,5% 1ms 25-50kHz flyback converter >6,5A/>2,2A >6,5A/>1,5A >2,2A/>1,5A continuous, automatic restart fixed on 5V output, optional to special order on others 0,02% 0,5V maximum on 5V outputs o o 1,6W/ C above 55 C B:V1,V2 5V(4,5-5,5V)/12-15V 0-6/0-2A <40mVPP

>2,2A

Mechanical details PK30, PK60

Weight PK30, PK60: 850 g

AC-DC

Pin allocation - H15 Connector

PIN function PK30 PK60 A 4 ---- ---- 6 ---- ---- 8 ---- ---- 10 ---- ---- 12 Note 1 ---- ---- 14 Note 1---- ---- 16 ---- ---- 18 +12-15V +12-15V 20 0V 0V 22 -12-15V -12-15V 24 ---- ---- 26 ---- ---- 28 N N 30 L L 32 E E

B +5V +5V 0V 0V +SENSE -SENSE ---- ---- +12-15V 0V ---- ---- N L E

C +5V +5V 0V 0V +SENSE -SENSE ---- ---- +24V 0V ---- ---- N L E

D +12-15V +12-15V 0V 0V ---- ---- ---- ---- +24V 0V ---- ---- N L E

Note 1: Sense lines must be connected. For maximum compensation for supply lead voltage drop they should be connected as close to the load as possible.

18

VERO + Danica

PK-Series: TRIVOLT

Primary switched mode power supplies for use in 19" subracks to DIN41494, 60 to 250 Watts output. Features n 3 high stability outputs, all adjustable n Safety approvals to UL, cUL and EN60950 n CE marked for compliance to EMC and Low Voltage Directives n SENSE operation (5V output) n Overvoltage (OVP) protection (5V output) n Short circuit protected n Powerfail signal n No minimum load required n Coded H15 connector n Standardized pinning

PK-Series TRIVOLT Power Supply

Ordering information

Description: TRIVOLT PK60; 3U x 8HP, 60 Watt output power Model Outputs V1 PK60-A PK60-A PF PK60-B PK60-B PF 5V/6A 5V/6A 5V/6A 5V/6A V2 +12-15V/1A +12-15V/1A +12-15V/2A +12-15V/2A V3 -12-15V/1A -12-15V/1A -12-15V/0,5A -12-15V/0,5A 116-010018J* 116-010103A# 116-010101G* 116-010102D# Order-Code

Technical Data PK Series: Trivolt Input specification

Input voltage switchable: Input frequency: Inrush surge current limitation: Input overvoltage protection: Hold up time (Nominal VIN; 100% IOUT): Efficiency: Certified to: 115/230VAC 47-63Hz by NTC resistor by VDR >20ms typ. >75%

Safety (Compliant with Low Voltage Directive 73/23/EEC)

EN60950, IEC 950, UL1950, VDE 0805

Description: Trivolt PK120; 3U x 14HP, 6U x 8HP 120Watt output power PK120 3U V1:5V/12A V2/V3: ±12-15V/2A 116-010046C# PK120 6U V1:5V/12A V2/V3: ±12-15V/2A 116-010047L# PK120 6U PF PK120 3U PF V1:5V/12A V2/V3: ±12-15V/2A V1:5V/12A V2/V3: ±12-15V/2A 116-010079D# 116-010078G#

EMC (Compliant with EMC Directive 89/336/EEC)

Emmisions: EN 55022/B (0,15-30MHz); EN 55022/B (30-1000MHz) Immunity: EN 50082-2 Electro Static Discharge: EN 61000-4-2 Electrical fast transients/Burst: EN 61000-4-4 RF Conducted disturbance: EN 50141 RF Field susceptibility: EN 50140

Environmental

Description: Trivolt PK125; 6U x 8HP, 125 Watt output power V1 PK125 5V/13A V2 +12V/4A V3 -12V/1A 116-010182E Operating temperature: Storage temperature: Relative humidity: 0°C to +70°C -25°C to +85°C Non-condensing 5% - 95%

Physical

Case material/finish: Clear anodised, ventilated aluminium cassette with cooling cutouts and front or rear heat sinks as applicable. DIN 41494 part 5 compatible * EN60950 and UL certified # EN60950

Description: Trivolt PK250-2; 6U x 14HP, 250 Watt output power V1 V2 V3 PK250 with VME-Signal 5V/30A +12V/6A -12V/3A 116-010115B#

Description: Accessories Reduced height front panel: PK60 Reduced height front panel: PK120, 3U Mating connector coded H15 to DIN 41612 Coding keys (pkt 10)

Note: PF = Powerfail

148-10010A 148-10020H 017-10115K 017-10064F

Mating connector coded H15+2HA faston to DIN 41612 017-10138K

19

AC-DC

VERO + Danica

PK Series: TRIVOLT

Output specifications PK60 Output voltage: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection:Short circuit protection: Overvoltage protection (OVP): Powerfail Signal (at full load) >6ms before VOUT: o Temperature-Coefficient/ C: Voltage compensation with SENSE max.NOTE1: Derating: PK120 Ausgangsspannung: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection:Short circuit protection: Overvoltage protection (OVP): Powerfail Signal (at full load) >6ms before VOUT: o Temperature-Coefficient/ C: Voltage compensation with SENSE max.NOTE1: Derating: V1 5V 4,5-5,5V 0-6A <40mVPP <0,2% <0,2% 1ms >6,5A 6-6,7V <4,8V 0,5V Version A: V2,V3 ±12-15V ±0-1A <3mVPP <0,02% <0,2% (0,75%) 10ms 20-50kHz flyback converter >±1,1A continuous, automatic restart 0,02% o o 1,6W/ C above 45 C Version B: V2,V3 ±12-15V +2A/-0-0,5A <3mVPP <0,02% <0,5% (0,75%) 10ms >2,1A/0,6A -

V1 5V 4,5-5,5V 0-12A <40mVPP <0,02% <0,2% <0,2ms

V2,V3 ±12-15V 0-2A <20mVPP

<0,5ms 25-100kHz flyback/forward converter >2,2A continuous, automatic restart 0,02%

o o

>12,5A 5,5-6,0V <4,8V 0,5V

-

4W/ C above 55 C V2 V3 12V -12V 10,8-13,2V -10,8-13,2V 0-4A 0-1A <40mVPP <0,3% <0,2% <0,2% <0,2% 1ms 1ms 1ms 50kHz forward converter >14A >5A >1A continuous, automatic restart 6,0-6,7V adjustable ACFAIL and SYSRESET in accordance with VME spec. rev D 0,05% 0,5V o o 3W/ C above 55 C V1 5V 4,5-5,5V 0-13A

AC-DC

PK125 Ausgangsspannung: Output adjustment range: Ausgangsgleichstrom: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail Signal (at full load) >6ms before VOUT: o Temperature-Coefficient/ C: Voltage compensation with SENSE max.NOTE1: Derating:

PK250 Ausgangsspannung: Output adjustment range: Output current: Ripple: Line regulation (100% IOUT): iVOUT Load regulation static (10...90% IOUT): iVOUT Transient response (10...90% IOUT): Switching frequency, converter type: Current limit: Short circuit protection: Overvoltage protection (OVP): Powerfail Signal (at full load) >6ms before VOUT: o Temperature-Coefficient/ C: Voltage compensation with SENSE max.NOTE1: Derating:

V2 V3 12V -12V 10,8-13,2V -10,8-13,2V 0-6A 0-3A <40mVPP <0,2% <0,2% <1% <1% 1ms 2ms 2ms 50kHz halfbridge push-pull converter >31A >6,5A >3,5A continuous, automatic restart 5,5-7,0V adjustable ACFAIL and SYSRESET in accordance with VME spec. rev D 0,05% 0,5V o o 6W/ C above 55 C

V1 5V 4,5-5,5V 0-30A

20

VERO + Danica

PK Series: TRIVOLT

Mechanical details PK60 PK120, PK125, PK250

Weight: PK60:

850g

14HP

8HP

Weight: PK120, PK125: Weight: PK250:

1350g 2500g

Pin allocation H15-connector

PIN 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Function PK60 +5V +5V -Vout -Vout +SENSE -SENSE PF Q +12-15V 0V -12-15V ---- ---- N L E

Pin allocation - H15+2HA connector

PIN Function S2 PIN Function S1 (DIN41612 - C96)

I

I I 14 16 18 20 22 28 30 32

PK125/250 +5V 0V +SENSE -SENSE +12V 0V (±12V) -12V N L E

B3 C12 C9

PK125/250 AC FAIL SYS RESET 0V

II 14 16 18 20 22 24 26 28 30 32

21

AC-DC

PK120 +5V +5V -Vout -Vout +SENSE -SENSE PF Q +12-15V 0V -12-15V ---- ---- N L E

Information

verodanica cat engl1.pdf

10 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

842643


You might also be interested in

BETA
st8000a.PDF
TTi EX-R series prtecision mixed-mode regulated bench power supplies
untitled