Read ____________________________________________________________________ text version

____________________________________________________________________

Antifreeze SF Premix

Silicate Free Long-Life Engine Coolant

_____________________________________________________________________________________ Applications

Castrol Antifreeze SF Premix is a ready to use long-life engine coolant based on a monoethylene glycol fluid combined with special inhibitor additive technology. This technology is also free from Silicates, Amines, Nitrites, Phosphates and other inorganic inhibitors. Castrol Antifreeze SF Premix provides outstanding corrosion protection and cooling performance in Engines employing cast iron and / or aluminium and also in cooling systems with aluminium and / or copper alloys.

_____________________________________________________________________________________ Features / Benefits

- As a diluted product Castrol Antifreeze SF Premix is ready to use without further dilution. - The long operational life of the product allows extended drain intervals with subsequent reduced costs and less possibility of harm to the environment. - The additive technology in the product inhibits build up of calcium deposits from top up with hard water. - Suitable for use in a wide range of vehicles - ideal for mixed fleet operations. - Wide operating temperature range for effective engine cooling in all climates

_____________________________________________________________________________________ Specifications / Performance

For optimum performance, Castrol Antifreeze SF Premix should not be mixed with other coolants. It is recommended that cooling systems should be drained and flushed before re-filling with Castrol Antifreeze SF Premix. Castrol Antifreeze SF Premix meets the requirements of the following OEMs: - Audi / VW TL 774 D - MB Page 325.3 - Ford WSS-M97B44-D - GM / Opel GM6277M - MAN Type 324 SNF - Deutz, MWM, Caterpillar, Cummins - Saab, Mazda, Renault, Scania

_____________________________________________________________________________________ Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.

Antifreeze SF Premix

Silicate Free Long-Life Engine Coolant

Health, Safety and Environment

Health, safety and environmental information is provided for this product in the Materials Safety Data Sheet. This gives details of potential hazards, precautions and First Aid measures, together with environmental effects and disposal of used products. Castrol International will not accept liability if the product is used other than in the manner or with the precautions or for the purpose/s specified. Before the product is used other than as directed, advice should be obtained from the local Castrol office.

_____________________________________________________________________________________

Typical Characteristics _____________________________________________________________________________________ Test Method Units Value

_____________________________________________________________________________________

_____________________________________________________________________________________

Relative Density at 15ºC Appearance Colour Reserve Alkalinity pH Freezing Point Boiling Point Refractive Index @ 20°C

ASTM D4052 Visual Visual ASTM D1121 ASTM D1287 ASTM D1177 ASTM D1120 ASTM D1218

g/cm3 ml 0.1N HCl °C °C

1.068 Clear / slight haze Fluorescen t Orange 3.0 8.4 -38 107 1.385

The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.

This Data Sheet and information it contains is considered to be accurate at the date of printing. No warranty or representation, expressed or implied, is made as to the accuracy or completeness of the data and information contained in this publication.

It is the User's obligation to evaluate and use products safely and within the scope advised in the data sheet and to comply with all applicable laws and regulations. No statement made in this publication shall be construed as a permission, recommendation or authorisation given or implied to practice any patented invention without a valid licence.

The Seller shall not be responsible for any loss or damage resulting from any hazards or risks identified in the data sheet and which are associated with petroleum products concerned (provided that this disclaimer shall not affect any statutory rights of the Buyer of the petroleum products concerned).

_____________________________________________________________________________________

Information

____________________________________________________________________

3 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

118213


Notice: fwrite(): send of 203 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531