Read PROCEDURE (continued) text version

TELMA RETARDER, INC.

This document is the exclusive property of TELMA RETARDER INC. It cannot be copied, modified, forwarded, or given to any third party without prior agreement from TELMA RETARDER INC. Any infringement will immediately involve legal action.

Electrical Systems

1501 Morse Avenue, Elk Grove Village, IL 60007 Tel: (847) 593-1098 · Fax: (847) 593-3592

TIL15009

Revised: 12-DEC-2008

TECHNICAL SERVICE BULLETIN

SUBJECT: Products Affected: Effective Date: ABS on Navistar International Chassis with air brakes All From 2006 Model Year

Some ABS modules used exclusively on 2006 and newer Navistar International chassis equipped with air brakes do not have the capability to interface with a retarder using the retarder relay connection, pin #17 of the X1 connector as shown in Bendix ABS manual SD-13-4863. If a retarder relay is installed on this pin there will be an ABS fault code. The part number for the standard ABS module used on Navistar International chassis that does not have the retarder relay connection is (Bendix part number 5016357 (K020368 starting August 2007) / Navistar International part number 3609072C1). When a Telma is installed in a chassis equipped with this ABS module, the Bendix ABS module must be replaced with the premium version. Consult Bendix EC-60 manual for replacement and recalibration procedures. The part number for the Bendix EC-60 premium ABS module that has the retarder relay capability is (Bendix part number 5016142 (5020001 starting April 2007) / Navistar International part number 3609076C1 (New reference 3816146C1) ). This module must be purchased through the Navistar International parts procurement dealer network. If the vehicle is equipped with traction control, stability control, or dual rear axle control (6S/6M configuration) the vehicle is already equipped with the premium module and no upgrade is needed. This service bulletin only applies to Navistar International chassis. Bendix standard ABS on other manufacturers chassis has the capability to interface using a retarder control relay connected to pin # 17 of the X1 connector. This service bulletin does not apply to chassis with hydraulic braking systems. Attached is the updated Telma wiring diagram. If you have any questions, contact Telma customer support at 800 797-7714 or go to the Telma helpdesk at www.telmausa.com and submit a ticket with your questions 24 hours a day / 7 days a week.

Update for 2008 chassis: Navistar International part number for Premium ABS module is 3816146C1 (Bendix part number 5020001). CSE

Effects Only: Bendix P/N 5016357 (International P/N 3609072C1) Both Part Numbers at top left of label Page 1 of 2

Please forward to all applicable users

This document is the exclusive property of TELMA RETARDER INC. It cannot be copied, modified, forwarded, or given to any third party without prior agreement from TELMA RETARDER INC. Any infringement will immediately involve legal action.

CSE

Electrical Systems

TELMA RETARDER, INC.

1501 Morse Avenue, Elk Grove Village, IL 60007 Tel: (847) 593-1098 · Fax: (847) 593-3592

Please forward to all applicable users

TIL15009

Revised: 12-DEC-2008

Page 2 of 2

Information

PROCEDURE (continued)

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

452703


Notice: fwrite(): send of 204 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531