Read kvm-muv-install.pdf text version

Full Extension Soft-Close Undermount Drawer Slide

SPECIFICATIONS

Number: Mounting: Height: Load Rating: Finish: Travel: Sizes: Packaged: Rear Brackets: Fasteners: Install Jig: Full Extension Soft-Close Undermount Drawer Slide Side, for Frame or Frameless Construction 1-7/8" 75-Pound Class Zinc Full Extension 9" 10" 12" 14" 15" 16" 18" 20" 21" 22" , , , , , , , , , Bulk (B): 6 Sets per Carton. Includes Front Release Levers (14"+). Bulk (B): 4 Sets per Carton. Includes Front Release Levers (9",10",12"). MUV-RBM Metal Rear Bracket (for use on 14",15",16",18",20",21",22" Slides). 12 Brackets (Unhanded). MUV-RBP Plastic Rear Brackets (for use with 9",10",12" Slides). 8 Brackets (4 Right Hand, 4 Left Hand). MUV-122: #7 x 5/8" Flat Head Screw ­ Slide MUV-123: #6 x 1/2" Truss Head Screw ­ Front Release Levers and Rear Bracket MUV-121

Material Thickness

For use with the following material thicknesses:

5/8" [16mm] 9/16" [14mm] 1/2" [13mm]

DRAWER ASSEMBLY

Optimal Operation Guidelines for Drawer Width Based on Drawer Height: Drawer Height up to 6": Drawer Height Greater than 6": Drawer Height Greater than 8": Drawer Height Greater than 10": Max. Width = Slide Length + 10" Max. Width = Slide length + 10" or 28", whichever is less Max. Width = Slide Length + 10" or 24", whichever is less Max. Width = Slide Length + 10" or 21", whichever is less

DRAWER HARDWARE INSTALLATION

31/32" [24.6mm] 29/32" [23mm]

Release Lever Adjustment (1/8") (Vertical Adjustment)

Variable 1/4" [6.3mm]

Drawer Bottom

Pre-drill front holes at 15º angle.

Drawer Bottom

1

Full Extension Soft-Close Undermount Drawer Slide FACE FRAME APPLICATIONS [WITH DECORATIVE FRONT]

Cabinet Depth Interior Depth

Bracket: 3/16" to 1-7/8" [5mm to 48mm] Slides 14" + 3/16" to 1-1/16" [5mm to 27mm] Slides 9" to 12" Slide Length Setback 5/32" [4mm] Mount Position 3/8" [10mm]

1-7/16" [37mm] 31/32" [25mm] Drawer Length Min. Top Gap 1/4" [6mm]

Max. Drawer Height= Bottom Opening minus 13/16" Recess [20mm] 1/2" max. [12.7mm]

Bottom Clearance 9/16" [14mm]

Drawer Gap 1/32" [1mm] Interior Depth Range

Variable Setback

Face Frame Inset Application

Rear Slide Detail

Slide Front Detail

1-1/4" [32mm] 1-5/16" [33mm] 1/4" [6mm]

Setback

Setback = Drawer Front Thickness + 3/16" [5mm]

11/32" [9mm] TYP

11/32"[9mm] TYP.

Depth Range

Min. = Slide Length + Setback + 3/16" [5mm] Max. = Slide Length + Setback + 1-15/16" [49.2mm] Slides 14"+ Max. = Slide Length + Setback + 1-1/16" [27mm] Slides 9",10",12"

1-7/16" [37mm] TYP. 31/32" [25mm] TYP. 11/32" [9mm]

1-15/32" [37.5mm]

1-7/16" 31/32" [37mm] [25mm]

SLIDE MUV 22 MUV 21 MUV 20 MUV 18 MUV 16 MUV 15 MUV 14 MUV 12 MUV 10 MUV 9

CABINET DEPTH 24" [610mm]* 24" [610mm] 24" [610mm]* 21" [533mm] 21" [533mm]* 18" [457mm] 18" [457mm]* 15" [381mm] 12" [305mm] 12" [305mm]

SLIDE LENGTH 22.4" [569mm] 21.4" [544mm] 20.4" [518mm] 18.4" [467mm] 16.4" [417mm] 15.4" [391mm] 14.4" [366mm] 12.4" [315mm] 10.15" [258mm] 10.15" [258mm]

DRAWER LENGTH 22" [559mm] 21" [533mm] 20" [508mm] 18" [457mm] 16" [406mm] 15" [381mm] 14" [356mm] 12" [305mm] 10" [254mm] 9" [229mm]

MAX INTERIOR DEPTH 24-9/16" [624mm] 23-9/16" [598mm] 22-9/16" [573mm] 20-9/16" [522mm] 18-9/16" [472mm] 17-9/16" [446mm] 16-9/16" [421mm] 13-3/4" [349mm] 11-3/4" [298mm] 11-3/4" [298mm]

MIN INTERIOR DEPTH 22-7/8" [581mm] 21-7/8" [555mm] 20-7/8" [530mm] 18-7/8" [479mm] 16-7/8" [429mm] 15-7/8" [403mm] 14-7/8" [378mm] 12-3/4" [324mm] 10-3/4" [273mm] 10-3/4" [273mm]

MAX. MATERIAL THICKNESS 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm]

SETBACK 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm]

* When using rear bracket at maximum extension.

2

Full Extension Soft-Close Undermount Drawer Slide FRAMELESS APPLICATIONS [WITH DECORATIVE FRONT]

Cabinet Depth Interior Depth

Slide Length [see chart at bottom of page] C A [see chart at bottom of page] B [see chart at bottom of page]

Setback 5/32" [4mm] Mount Position 1-7/16" [37mm]

31/32" [25mm] Min. Top Gap 1/4" [6mm]

1-7/16" [37mm]

Max. Drawer Height= Opening minus 13/16" [20mm] Bottom Recess 1/2"[12.7mm]

Bottom Clearance 9/16" [14mm]

Interior Depth Range

Drawer Gap 1/32" [1mm] Variable Setback

Frameless Inset Application

Rear Slide Detail

Slide Front Detail

1-1/4" [32mm] 1-5/16" [33mm] 1/4" [6mm]

Setback

Setback = Drawer Front Thickness + 3/16" [5mm]

11/32" [9mm] TYP

11/32"[9mm] TYP.

Min. Interior Depth

Min. = Slide Length + Setback + 1/8" [3mm]

1-7/16" [37mm] TYP. 1-15/32" [37.5mm] 31/32" [25mm] TYP. 11/32" [9mm]

1-7/16" 31/32" [37mm] [25mm]

SLIDE MUV 22 MUV 21 MUV 20 MUV 18 MUV 16 MUV 15 MUV 14 MUV 12 MUV 10 MUV 9

CABINET DEPTH MIN INTERIOR DEPTH 24" [610mm] 24" [610mm] 21" [533mm] 21" [533mm] 18" [457mm] 18" [457mm] 15" [381mm] 15" [381mm] 12" [305mm] 12" [305mm] 22-3/4" [578mm] 21-3/4" [553mm] 20-3/4" [527mm] 18-7/8" [479mm] 16-3/4" [425mm] 15-7/8" [403mm] 14-3/4" [375mm] 12-7/8" [326mm] 10-3/4" [273mm] 10-3/4" [273mm]

SLIDE LENGTH 22.4" [569mm] 21.4" [544mm] 20.4" [518mm] 18.4" [467mm] 16.4" [417mm] 15.4" [391mm] 14.4" [366mm] 12.4" [315mm] 10.15" [258mm] 10.15" [258mm]

DRAWER LENGTH 22" [559mm] 21" [533mm] 20" [508mm] 18" [457mm] 16" [406mm] 15" [381mm] 14" [356mm] 12" [305mm] 10" [254mm] 9" [229mm]

A 10-5/64" [256mm] 10-5/64" [256mm] 8-13/16" [224mm] 7-9/16" [192mm] 5-1/32" [128mm] 7-9/16" [192mm] 7-9/16" [192mm] 3-25/32" [96mm] 3-25/32" [96mm] 3-25/32" [96mm]

B 8-13/16" [224mm] 8-13/16" [224mm] 8-13/16" [224mm] 8-13/16" [224mm] 8-13/16" [224mm] 5-1/32" [128mm] 5-1/32" [128mm] 5-1/32" [128mm] 3-25/32" [96mm] 3-25/32" [96mm]

C 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm] 23/32" [18mm]

MAX. MATERIAL THICKNESS 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm] 5/8" [16mm]

SETBACK 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm] 5/32" [4mm]

3

Full Extension Soft-Close Undermount Drawer Slide DRAWER DIMENSIONS FOR FACE FRAME AND FRAMELESS APPLICATIONS

Cabinet Opening Width Min. Top Opening Clearance: 6.3mm (1/4") Drawer Width Calculation

Drawer Thickness 5/8" [16mm] 9/16" [14mm] 1/2" [13mm] Deduct from Opening Width 3/8" [10mm] 9/16" [14mm] 5/8" [16mm]

Inside Drawer Width

CRITICAL*

Max. Drawer Bottom Recess: 12.7mm (1/2")

CRITICAL

Min. Bottom Opening Clearance: 14mm (9/16")

*Cabinet Opening Width Minus 42mm (1-5/8") = Inside Drawer Width MuV Maximum Drawer Side Material Thickness: 16mm (5/8") Use Muv34 for Drawer Material from 16mm (5/8") to 19mm (3/4")

Drawer Notch & Bore

MUV-RBP

13/16" [21mm]

Rear Brackets

MUV-RBM

13/16" [21mm] 13/16" [21mm]

9/32" [7mm] 1/4" x 3/8" DEEP [6mm x 10mm DEEP]

1-1/4" [32mm]

1-1/4" [32mm] 5/8" [16mm]

7/16" [11mm] 1/2" Max. [12.7mm] 1-5/16" Min. [33mm]

5/8" [16mm] 5/8" [16mm]

5/8" [16mm]

KNAPE & VOGT LIMITED LIFETIME WARRANTY FOR COMMERCIAL PRODUCTS

This warranty is given to the initial purchaser of new commercial products purchased from Knape & Vogt and its subsidiaries. The warranty covers defects in materials and workmanship. The warranty does not apply to defects resulting from misuse, damage or abuse, normal wear and tear, accident, modification, improper installation or maintenance, third party materials or damage during shipping. The warranty is not transferable and does not cover any subsequent purchasers of the products. During the Limited Lifetime Warranty period, Knape & Vogt, will, at its option, repair or replace any defective product with a comparable product or component. This Limited Warranty is for repair or replacement of defective products only and does not cover any other costs such as removal, installation, or other related expenses. For warranty service, please contact Knape & Vogt, 2700 Oak Industrial Drive, Grand Rapids, MI 49505, Attention: Customer Service. Information regarding the claimed defect and date of purchase of the product must be provided. Any defective product must be returned postage or freight prepaid to Knape & Vogt. THIS LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY FOR THE PRODUCTS AND ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY DISCLAIMED. THIS LIMITED WARRANTY CONSTITUTES THE SOLE REMEDY AVAILABLE WITH REGARD TO ANY DEFECTIVE PRODUCTS. KNAPE & VOGT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS OF TIME, INCONVENIENCE, OR LOST REVENUES OR PROFITS. Copyright © 2006 Knape & Vogt, all rights reserved. Standard KV Commercial Warranty (Rev No.2, 9/23/05)

Patents Pending

© 2009 Knape & Vogt

2700 Oak Industrial Drive NE Grand Rapids, MI 49505 800.253.1561 · 616.459.3311 · fax 616.459.3290 www.kv.com

Manufacturer reserves the right to change specifications without notice and without incurring responsibility for existing units.

310149/0710

4

Information

4 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

357342


You might also be interested in

BETA
159434-1 3-01-12.indd
untitled
2003 Humboldt/1-16
NicholsStone_BuyersGuide.xls