Read PVC_HYG_En_Leaflet.fh11 text version

Built-In Pro tection Lifetime G uaranteed

FDA Appr

NON-TOXIC

oved Activ e Ingredie nt

PALRAM PVC With HYG

Flat and Corrugated PVC Panels with Active Hygiene

Introduction

Intensive research effort by PALRAM's Technology Department has produced a new PVC cladding that offers new and unsurpassed sanitary protection. PALRAM's patent pending HYG (Active Hygiene) products feature antimicrobial protection that facilitates excellent hygiene for a wide spectrum of applications. In addition to standard PVC's proven sanitary benefits (e.g. High chemical resistance), independent lab tests confirm that PVC HYG products effectively eliminate harmful microorganisms in less than 24 hours. PALRAM's PVC cladding with HYG is now available in flat and corrugated sheet for use in a wide variety of applications requiring Active Hygiene technology.

Fabrication Construction Agriculture

Features and Benefits

Active hygienic protection - Kills microbes Eliminates many types of mould, fungi and bacteria, including MRSA (resistant to antibiotics) Antimicrobial action - long life service Independently tested and approved Resistance to a wide range of chemicals Withstand frequent cleaning Indigestible by bacteria (Rigid PVC) High fire resistance Give excellent adhesion - even if steamcleaned daily Wide service temperature range Easy to install and maintain

Applications

Medical Sterile/clean rooms Hospitals and clinics Pharmaceutical structures Food manufacturing structures Sorting halls Storage/refrigeration chambers Plating of food transport trucks Livestock, poultry and dairy farms Egg sorting halls Storage/refrigeration chambers Water containers Production and sorting systems Refrigeration chambers

Food Industry Agricultural

Finished Products

Hospitals & clinics

Food Industry

Livestock applications

www.palram.com

Active Microbe Elimination

As independent tests show, HYG products eliminate millions of microbes within 24hr. Among microbes tested are common epidemic agents who suggest effective elimination of similar bacteria (gram-positive and gram-negative.) Determination of the antimicrobial efficacy of rigid PVC samples against bacteria according to modified AATCC 100 method

25M

Microbes Tested:

Microbe Type

Gram-positive

Found in...

Hospitals, poultry, pigpens Hospitals Hen hatchery Hen hatchery, poultry, pigpens Hospitals, poultry, hen hatchery Poultry, hen hatchery Hospitals, hen hatchery, food industry Water

Amount of Microbes (millions)

20M

Staphylococcus Aureus AACC 6538

Pseudomonas Aeruginosa ATCC27853 Gram-negative Aspergillus Niger Fungi Gram-negative Gram-negative Gram-positive Gram-positive Gram-negative

15M

Escherichia Coli ATCC Salmonella Typhimurium Streptococcus Fecalis

10M

Listeria Monocytogenes Ligionella Peumophila

5M

0

00:00 03:00 06:00 09:00 12:00 15:00 18:00 21:00 24:00

Method: A 50x50mm sample was inoculated with 0.1ml of microorganism culture and covered with film/glass slide to prevent evaporation. The samples were then incubated at 37 °C and >90% RH for 24hrs. Viable organisms were recovered by washing off with neutralizing fluid and serially diluting onto Tryptone Soya Agar, plates being incubated for 48hrs at 37°C

Product Availability

HYG technology can be incorporated into variety of PALRAM PVC products, and can be produced in White, Light Grey, Beige, Light Green, and Light Blue. HYG products are available immediately in PALRUF corrugated and PALOPAQUE flat sheet (See product leaflets for detailed info). Other products require minimum order quantities.

Field Testing in Hen Hatchery

Installed in a hen hatchery alongside standard rigid PVC, without cleaning operations during the test period, HYG cladding achieved a significant reduction in the total amount of microbes that appeared on the panels surface. Laboratory tests also revealed a considerable reduction of mould accumulation in HYG cladding.

8,000

Amount of Microbes

7,000 6,000 5,000 4,000 3,000 2,000 1,000 0

HYG Cladding Standard PVC Cladding

Typical Physical Properties

Property

(Method*)

Conditions

Units

g/cm3

Value

Density (D-1505) 1.4 Heat Deflection Temperature (D-648) °C 65 - 68 Load: 1.82 MP Service Temperature Range °C -20 to +50 Thermal Conductivity (C-177) W/m K 0.15 Coefficient of Linear Thermal Expansion (D-696) mm/m °C 0.067 Impact Falling Weight (ISO 6603/1) J 95 3 mm sheet Rockwell Hardness (D-785) R Scale 105 Tensile Strength at Yield (D-638) MPa 52 10 mm/min Tensile Strength at Break (D-638) MPa 50 10 mm/min Elongation at Yield (D-638) % 3 10 mm/min Elongation at Break (D-638) % 120 10 mm/min Tensile Modulus of Elasticity (D-638) MPa 2,900 1 mm/min Flexural Strength (D-790) MPa 80 1.3 mm/min Flexural Modulus (D-790) MPa 2,700 1.3 mm/min * ASTM except where noted otherwise.

Flammability

HYG sheets are selfextinguishing and comply with the most demanding international fire resistance standards defined in the field of plastics, as indicated by representative results in the table below.

Standard DIN 4102 BS 476/7 NSP 92501,5 CSE RF 3/77 UL 94 ASTM D-635

* Depends on thickness

Classification* B-1 Class 1 M-1 Class 1 V-0 SE

Europe UK Israel USA Australia Far East

EUROPE PALRAM EUROPE LTD. Tel (44) 1302 380 776 Fax (44) 1302 380 788 [email protected]

PALRAM UK Tel (44) 1302 380 738 Fax (44) 1302 380 739 [email protected]

ISRAEL PALRAM ISRAEL LTD. Tel (972) 4 8459 900 Fax (972) 4 8459 980 [email protected]

USA PALRAM AMERICAS Tel 610 285 9918 Fax 610 285 9928 [email protected]

©2006 PALRAM Industries Ltd. PVC HYG technology is patent pending and a trademark of PALRAM Industries Ltd.

w w w. p a l r a m . c o m

68130 01.07

Inasmuch as PALRAM Industries has no control over the use to which others may put the material, it does not guarantee that the same results as those described herein will be obtained. Each user of the material should make his own tests to determine the material's suitability for his own particular use. Statements concerning possible or suggested uses of the materials described herein are not to be construed as constituting a license under any PALRAM Industries patent covering such use or as recommendations for use of such materials in the infringement of any patent. PALRAM Industries or its distributors cannot be held responsible for any losses incurred through incorrect installation of the material. In accordance with our Company policy of continual product development you are advised to check with your local PALRAM Industries supplier to ensure that you have obtained the most up to date information.

Information

PVC_HYG_En_Leaflet.fh11

2 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

348019


Notice: fwrite(): send of 205 bytes failed with errno=104 Connection reset by peer in /home/readbag.com/web/sphinxapi.php on line 531