Read K500.pdf text version

Atos spa

21018 Sesto Calende, Italy - Fax 0331 920005

Table

K500-8/E

Electric/electronic connectors

for ON/OFF and proportional valves

1 ELECTRIC CONNECTORS CODE AND DIMENSIONS APPLICATION ELECTRICAL TERMINAL (1) SOCKET CABLE GLAND REFERENCE RULES INTERFACE Ø CABLE

SP-336

Connector for pressure transducer type E-ATR-5

Type 1 see section

PG7 4 ÷ 6 mm

Protection class IP 65 DIN 40050

SP-345

Standard connector S (signal) on ZO(R)-T and ZO-L proportional valves Connector for position trasducer type E-TH-*

Type 2 see section

PG7 4 ÷ 6 mm

Protection class IP 65 DIN 40050

SP-664

Connector for pressure switch type X-MAP Type 3 see section PG11 8 ÷ 10 mm

DIN 43650-A/ISO 4400 Protection class IP 65 DIN 40050

SP-666 (2) SP-667-24 SP-667-110 SP-667-220

Standard connector for ON/OFF valves, DC or AC power Standard connector W (power) for ZO(R)-A, ZO(R)-T, ZO-L proportional valves Option trasparent connector for ON/OFF valves with built-in led

SP-669 (2)

Option connector for ON/OFF valves with built-in rectifier bridge for supplying DC coils by AC current

Type 3 see section

PG11 8 ÷ 10 mm

DIN 43650-A/ISO 4400 Protection class IP 65 DIN 40050

SP-ZH-5P

Communication connection for proportional valves with digital integral electronic drivers and CAN-BUS interface

PG9 6 ÷ 8 mm

M12-IEC60947-5-2 Protection class IP 67 DIN 40050

M12-IEC60947-5-2

SP-ZH-5P/BP

Communication connection for proportional valves with digital integral electronic drivers with PROFIBUS interface

PG9 6 ÷ 8 mm

Protection class IP 68 DIN 40050 Reverse Key

SP-ZH-7P

Standard single - 7 pins, plastic glass fiber reinforced, connectors for proportional valves with integral electronics (3)

PG11 8 ÷ 10 mm

DIN 43563-BF6-3-PG11 Protection class IP 67 DIN 40050

SP-ZH-12P

Connector - 12 pins, plastic glass fiber reinforced, connectors for proportional valves with integral electronics

PG16 ø 6 mm x 2 cable

DIN 43563* Protection class IP 65 DIN 40050

SP-PT-06E-8-3S

Standard connector for intrinsic safety solenoids

ø 3,2 mm

According to Mil-C-26482 Protection class IP 67 DIN 40050

SP-PT-06E-10-6S

Standard military connector for joysticks type E-TLP

ø 4,8 mm

According to Mil-C-26482 Protection class IP 67 DIN 40050

SP-ZM-3P SP-ZS-3P (4)

Connector for military solenoids Connector for marine solenoids

PG11 8 ÷ 10 mm

According to Mil-C-5015 Protection class IP 66 DIN 40050

SP-ZM-4P SP-ZS-4P (4)

Connector for transducer on proportional valves in military execution. Connector for transducer on proportional valves in marine execution. Connector for transducer on proportional valves in military execution. Connector for transducer on proportional valves in marine execution.

According to Mil-C-26482 Protection class IP 67 DIN 40050 According to Mil-C-50516 Protection class IP 66 DIN 40050

PG11 8 ÷ 10 mm

SP-ZM-7P SP-ZS-7P (4)

SP-PT-06W-8-4S

Standard military connector for transducer on CKP, CKV and CKW servocylinders

4,2 ÷ 5,8 mm

(1) Connection of electrical terminals must be realized according to instructions of the specific technical table of the valve. (2) These connectors are black. White versions are also available (SP-666/A, SP-669/A) (3) It is also available a metal connector type SP-ZM-7P in alluminium alloy with cadmium plating (4) As SP-ZM-*P plus epoxy painting

K500

2

ELECTRONIC CONNECTORS FOR ON/OFF VALVES CODE AND DIMENSIONS APPLICATION

Electronic connector which improve performances and give faster shifting times for DC solenoid supplied by AC current Power supply: 110/50, 115/60 VAC with coil SP-C*U-24DC 220/50, 230/60 VAC with coil SP-C*U-48DC Electronic connector which improve performances and reduce power consumption for DC solenoid supplied by DC current Power supply: 12 VDC with coil SP-C*U-6DC 24 VDC with coil SP-C*U-12DC Electronic connector which permit the switching of AC solenoid valves by a low pilot signal (max 20 mA) Pilot voltage: 4,7 ÷ 24 VDC Power supply: 110/50, 115/60, 220/50, 230/60 VAC

ELECTRICAL TERMINAL (1)

SOCKET CABLE GLAND REFERENCE RULES INTERFACE Ø CABLE

E-SA

Type 3 see section

E-SE

Type 3 see section

PG11 8 ÷ 10 mm

DIN 43650 Protection class IP 65 DIN 40050

E-SR/AC

Type 4 see section

E-SR/DC

Electronic connector which permit the switching of DC solenoid valves by a low pilot signal (max 20 mA) Pilot voltage: 4,7 ÷ 24 VDC Power supply: 12, 24, 48 VDC Supplied with 5 m long cable

Type 4 see section

ø 7 mm

Protection class IP 65 DIN 40050

BLACK RED

WHITE YELLOW

E-SD/AC

Electronic connector which eliminate electric disturbances when AC solenoid valves are deenergized Power supply: 110/50, 115/60, 220/50, 230/60 VAC

Type 4 see section

PG11 8 ÷ 10 mm

DIN 43650 Protection class IP 65 DIN 40050

E-SD/DC

Electronic connector which eliminate electric disturbances when DC solenoid valves are deenergized Power supply: 12, 24, 48 VDC

Type 3 see section

PG11 8 ÷ 10 mm

DIN 43650 Protection class IP 65 DIN 40050

SP-ZH-4P/68

Standard connector for ON/OFF safety cartridges type JODL

PG09 6 ÷ 8 mm

M12 IEC 60947-5-2 Protection class IP 65 DIN 40050

(1) Connection of electrical terminals must be realized according to instructions of the specific technical tables of the valve.

3

CABLE GLANDS FOR EX-PROOF VALVES CODE AND DIMENSIONS APPLICATION CABLE GLAND REFERENCE RULES Ø CABLE

SP-/PA19

min = 7 max = 9,5 CH 33 IP 67

Cable clamp for ex-proof solenoids and ex-proof transducers

SP-/PA112

GK-1/2* ISO/UNI-6125 M20X1.5 UNI-4535 1/2* NPT ANSI B2.1

min = 9 max = 12

4

SOCKET INTERFACES: DIMENSIONS [mm]

Type 1 12/01

Type 2

Type 3

Type 4

Information

2 pages

Find more like this

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

301139


You might also be interested in

BETA
RD 64283/09.08