Read 1988 MODEL MR2 SPECIFICATIONS T-PG009-87 text version

TOYOTA

SERVICE BULLETIN

TOYOTA MOTOR SALES, U.S.A., INC.

VOLUME

9

REFERENCE NUMBER DATE MODEL

PRODUCT GENERAL INFORMATION 009 09­25­87 1988 MR2 (AW)

Page 1 of 6

1988 MODEL MR2 SPECIFICATIONS

Vehicle Model and Code: BODY TYPE 2­Door Coupe 2­Door Coupe 2­Door Coupe 2­Door Coupe 2­Door Coupe 2­Door Coupe Dimensions: in. Overall Length Overall Width Overall Height Wheelbase Front Tread Rear Tread Ground Clearance Weight (Pounds): Model No. 3077 3078 3087 3088 3097 3098 *New model for 1988 Curb 2530 2493 2425 2350 2465 2390 lbs.* lbs.* lbs. lbs. lbs. lbs. 155.5 65.6 48.6 91.3 56.7 56.7 5.1 mm 3950 1665 1235 2320 1440 1440 130 TRANSMISSION 4­Speed Automatic 5­Speed Manual 4­Speed Automatic 5­Speed Manual 4­Speed Automatic 5­Speed Manual VDS OF VIN AW16J AW16J AW15C AW15C AW15J AW15J MODEL NO. 3077* 3078* 3087 3088 3097 3098

w/T­Bar SC w/T­Bar SC

w/T­Bar w/T­Bar

TECHNICAL ASSURANCE DEPARTMENT

Page 2 of 6

1988 MODEL MR2 SPECIFICATIONS (Cont'd)

Engine: Model Type Displacement Bore and Stroke Compression Ratio Compression Pressure HP (SAE Net) Torque (SAE Net) Ignition System: Spark Plug Type Nippondenso NGK Spark Plug Gap Firing Order Ignition Timing: 4A­GELC 4 cylinder in­line, 16 valve DOHC 96.8 cu in (1587 cc) 3.2 x 3.0 in. (81.0 x 77.0 mm) 9.4:1 STD 179 psi @ 250 rpm, LIMIT 142 psi 115 hp @ 6600 rpm 100 ft­lb @ 4800 rpm

PQ16R BCPR5EP11 0.043 in. (1.1 mm) 1­3­4­2 10_ BTDC @ Idle (Check connector T­E1 shorted) NOTE: T/M in "N" range

Valve Clearance: Intake (Cold) Exhaust (Cold) Engine: Model Type Displacement Bore and Stroke Compression Ratio Compression Pressure HP (SAE Net) Torque (SAE Net) Ignition System: Spark Plug Type Nippondenso NGK Spark Plug Gap Firing order Ignition Timing: 0.006­0.010 in (0.15­0.25 mm) 0.008­0.012 in (0.20­0.30 mm) 4A­GZE 4 Cylinder in­line, 16 valve DOHC, Super Charged 96.8 cu. in. (1587 cc) 3.2 x 3.0 in. (81.0 x 77.0 mm) 8.0:1 STD 156 psi @ 250 rpm, Limit 121 psi 145 hp @ 6400 rpm 140 ft­lb @ 4000 rpm

PQ20R BCPR6EP11 0.043 in. (1.1 mm) 1­3­4­2 10 degree BTDC @ Idle (Check connector T­E1 shorted) NOTE: T/M in "N" range

TECHNICAL ASSURANCE DEPARTMENT

Page 3 of 6

1988 MODEL MR2 SPECIFICATIONS (Cont'd)

Valve Clearance: Intake (Cold) Exhaust (Cold) Cooling System: Type Radiator Radiator Cap Pressure Water Pump Thermostat, Valve Opening Temperature Cooling System Capacity With Heater With A/C Water cooled Vertical flow fin and tube 10.7­14.9 psi (0.75­1.05 kg/cm2) Centrifugal v­ribbed belt drive 180_ F (82_ C) 0.006­0.010 in. (0.15­0.25 mm) 0.008­0.012 in. (0.20­0.30 mm)

12.9 qt. (12.2 liter) (Manual) 13.1 qt. (12.4 liter) (Manual) 13.6 qt. (12.9 liter) (Automatic)

Fuel System: Type of Fuel Distribution Fuel Pump Type Fuel Pump Pressure Electronic Fuel Injection Electric 4A­GE: 38­44 psi (2.7­3.1 kg/cm2) 4A­GZE: 33­40 psi (2.3­2.8 kg/cm2) Paper filter element (flow through) 10.8 gal (41 liter) USE UNLEADED PREMIUM FUEL ONLY Research Octane No. 96 Anti­Knock Index 91 or higher Research Octane No. 91 Anti­Knock Index 87 or higher

Fuel Filter Type Fuel Tank Capacity Fuel Grade 4A­GZE

4A­GE

Lubrication System: Type Oil Pump Oil Filter Capacity Recommended Motor Oil Oil Capacity With Filter Mechanical Gear type 0.3 qt. API grade SF or better 3.6 qt. (3.4 liter) w/oil cooler 3.5 qt. (3.3 liter) w/o oil cooler

Electrical System: Battery (volts/amp hours) Alternator (volts/amps) Starter Motor (volts/kW) 12V/60A­hr 12V/70A 12V/1.4KW

TECHNICAL ASSURANCE DEPARTMENT

Page 4 of 6

1988 MODEL MR2 SPECIFICATIONS (Cont'd)

Steering: Type Gear Ratio Turning Circle Rack and pinion 18.0:1 (Manual) 31.5 ft (9.6 m)

Alignment, Front Wheel (Unloaded): Service Checking: Caster 5_05'$45' Camber 15'$45' Toe­In 0.04$0.08 in. (1$2 mm) Service Reset: Caster Camber Toe­In

5_05'$30' 15'$30' 0.04$0.04 in. (1$1 mm)

Alignment, Rear Wheel (Unloaded): Service Checking: Camber ­55'$45' Toe­In 0.20$0.08 in. (5$2 mm) Service Reset: Camber ­55'$30' Toe­In 0.20$0.04 in. (5$1 mm) Suspension: Front Rear Tires: Size, Type (optional) 185/60R14 82H, Radial 185/60R14 82H, M&S MacPherson strut, coil spring, w/stabilizer bar MacPherson strut, coil spring

TECHNICAL ASSURANCE DEPARTMENT

Page 5 of 6

1988 MODEL MR2 SPECIFICATIONS (Cont'd)

Brakes: Type Front Rear Parking Brake Front Disc Diameter, Overall Rear Disc Diameter Clutch Type Operation Disc Diameter Pressure Plate Type Clutch Pedal Free Play Release Fork End Play Transaxle: Manual (C52) Gear Ratio 4A­GELC 5­Speed synchromesh First ­ Second ­ Third ­ Fourth ­ Fifth ­ Reverse ­ Lubricant Capacity Type 4A­GELC Single dry plate Hydraulic release 8.35 in. (212 mm) Diaphragm 0.51­0.91 in. (13­23 mm) Non­adjustable type 4A­GZE Single dry plate Hydraulic release 8.8 in. (224 mm) Diaphragm 0.51­0.91 in. (13­23 mm) Non­adjustable type Power assisted 4 wheel disc Floating caliper, vented rotor Floating caliper, solid rotor Mechanically operated on rear wheels 10.2 in. (258 mm) 10.4 in. (263 mm)

3.166 1.904 1.310 0.969 0.815 3.250

­ 2.7 qt. (2.6 liter) ­ Multipurpose, API GL­4 SAE 75W­90

Automatic (A240E) Gear Ratio

First Second Third Fourth Reverse Lubricant Capacity Type

­ ­ ­ ­ ­

3.643 2.008 1.296 0.892 2.977

­ 7.6 qt. (7.2 liter) DEXRON RII ATF

TECHNICAL ASSURANCE DEPARTMENT

Page 6 of 6

1988 MODEL MR2 SPECIFICATIONS (Cont'd)

Differential Type Differential Ratio Ring Gear Size Fluid Capacity Manual (C52) Type Viscosity Helical gear 4.312:1 M/T 2.962:1 A/T 7.51 in (191 mm) 2.7 qt (2.6 liter) Transaxle API GL­4 SAE 75W­90 4A­GZE 5­Speed synchromesh First ­ 3.230 Second ­ 1.913 Third ­ 1.258 Fourth ­ 0.918 Fifth ­ 0.731 Reverse ­ 3.583 Lubricant Capacity ­ 4.8 qt. (4.2 liter) ­ Multipurpose API GL­5 ­ SAE 75W­90

Manual (E51) Gear Ratio

Automatic (A241E) Gear Ratio

First Second Third Fourth Reverse Lubricant Capacity

­ ­ ­ ­ ­

3.643 2.008 1.296 0.892 2.977

­ 8.4 qt. (7.9 liter) ­ DexronR II ATF

Differential Type Differential Ratio Ring Gear Size Fluid Capacity Manual Type Viscosity

Helical Gear 4.285:1 M/T 3.034:1 A/T 7.51 in. (191 mm) 4.4 qt. (4.2 liter) transaxle API GL­5 SAE 75W­90

TECHNICAL ASSURANCE DEPARTMENT

Information

1988 MODEL MR2 SPECIFICATIONS T-PG009-87

6 pages

Report File (DMCA)

Our content is added by our users. We aim to remove reported files within 1 working day. Please use this link to notify us:

Report this file as copyright or inappropriate

651565